6 files changed, 9 insertions, 9 deletions
diff --git a/Documentation/video4linux/README.pvrusb2 b/Documentation/video4linux/README.pvrusb2
index a747200fe67..2137b589276 100644
--- a/Documentation/video4linux/README.pvrusb2
+++ b/Documentation/video4linux/README.pvrusb2
@@ -172,7 +172,7 @@ Source file list / functional overview:
     to provide a streaming API usable by a read() system call style of
     I/O.  Right now this is the only layer on top of pvrusb2-io.[ch],
     however the underlying architecture here was intended to allow for
-    other styles of I/O to be implemented with additonal modules, like
+    other styles of I/O to be implemented with additional modules, like
     mmap()'ed buffers or something even more exotic.
 
   pvrusb2-main.c - This is the top level of the driver.  Module level
diff --git a/Documentation/video4linux/bttv/README b/Documentation/video4linux/bttv/README
index 3a367cdb664..7cbf4fb6cf3 100644
--- a/Documentation/video4linux/bttv/README
+++ b/Documentation/video4linux/bttv/README
@@ -70,7 +70,7 @@ If you have trouble with some specific TV card, try to ask there
 instead of mailing me directly.  The chance that someone with the
 same card listens there is much higher...
 
-For problems with sound:  There are alot of different systems used
+For problems with sound:  There are a lot of different systems used
 for TV sound all over the world.  And there are also different chips
 which decode the audio signal.  Reports about sound problems ("stereo
 does'nt work") are pretty useless unless you include some details
diff --git a/Documentation/video4linux/bttv/README.freeze b/Documentation/video4linux/bttv/README.freeze
index 4259dccc828..5eddfa076cf 100644
--- a/Documentation/video4linux/bttv/README.freeze
+++ b/Documentation/video4linux/bttv/README.freeze
@@ -33,7 +33,7 @@ state is stuck.
 
 I've seen reports that bttv 0.7.x crashes whereas 0.8.x works rock solid
 for some people.  Thus probably a small buglet left somewhere in bttv
-0.7.x.  I have no idea where exactly, it works stable for me and alot of
+0.7.x.  I have no idea where exactly, it works stable for me and a lot of
 other people.  But in case you have problems with the 0.7.x versions you
 can give 0.8.x a try ...
 
diff --git a/Documentation/video4linux/bttv/Sound-FAQ b/Documentation/video4linux/bttv/Sound-FAQ
index bc5e41d5d77..395f6c6fdd9 100644
--- a/Documentation/video4linux/bttv/Sound-FAQ
+++ b/Documentation/video4linux/bttv/Sound-FAQ
@@ -2,7 +2,7 @@
 bttv and sound mini howto
 =========================
 
-There are alot of different bt848/849/878/879 based boards available.
+There are a lot of different bt848/849/878/879 based boards available.
 Making video work often is not a big deal, because this is handled
 completely by the bt8xx chip, which is common on all boards.  But
 sound is handled in slightly different ways on each board.
diff --git a/Documentation/video4linux/pxa_camera.txt b/Documentation/video4linux/pxa_camera.txt
index 4f6d0ca0195..51ed1578b0e 100644
--- a/Documentation/video4linux/pxa_camera.txt
+++ b/Documentation/video4linux/pxa_camera.txt
@@ -84,12 +84,12 @@ DMA usage
        transfer is not started. On "End Of Frame" interrupt, the irq handler
        starts the DMA chain.
      - capture of one videobuffer
-       The DMA chain starts transfering data into videobuffer RAM pages.
-       When all pages are transfered, the DMA irq is raised on "ENDINTR" status
+       The DMA chain starts transferring data into videobuffer RAM pages.
+       When all pages are transferred, the DMA irq is raised on "ENDINTR" status
      - finishing one videobuffer
        The DMA irq handler marks the videobuffer as "done", and removes it from
        the active running queue
-       Meanwhile, the next videobuffer (if there is one), is transfered by DMA
+       Meanwhile, the next videobuffer (if there is one), is transferred by DMA
      - finishing the last videobuffer
        On the DMA irq of the last videobuffer, the QCI is stopped.
 
@@ -101,7 +101,7 @@ DMA usage
 
      This structure is pointed by dma->sg_cpu.
      The descriptors are used as follows :
-      - desc-sg[i]: i-th descriptor, transfering the i-th sg
+      - desc-sg[i]: i-th descriptor, transferring the i-th sg
         element to the video buffer scatter gather
       - finisher: has ddadr=DADDR_STOP, dcmd=ENDIRQEN
       - linker: has ddadr= desc-sg[0] of next video buffer, dcmd=0
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index 3b15608ee07..cf21f7aae97 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -343,7 +343,7 @@ ignored. If you want to check for errors use this:
 	err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_chip_ident, &chip);
 
 Any error except -ENOIOCTLCMD will exit the loop with that error. If no
-errors (except -ENOIOCTLCMD) occured, then 0 is returned.
+errors (except -ENOIOCTLCMD) occurred, then 0 is returned.
 
 The second argument to both calls is a group ID. If 0, then all subdevs are
 called. If non-zero, then only those whose group ID match that value will