diff options
Diffstat (limited to 'Documentation/virtual')
| -rw-r--r-- | Documentation/virtual/kvm/api.txt | 146 | ||||
| -rw-r--r-- | Documentation/virtual/kvm/devices/README | 1 | ||||
| -rw-r--r-- | Documentation/virtual/kvm/devices/mpic.txt | 53 | ||||
| -rw-r--r-- | Documentation/virtual/kvm/devices/xics.txt | 66 |
4 files changed, 260 insertions, 6 deletions
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 119358dfb74..5f91eda9164 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -1486,15 +1486,23 @@ struct kvm_ioeventfd { __u8 pad[36]; }; +For the special case of virtio-ccw devices on s390, the ioevent is matched +to a subchannel/virtqueue tuple instead. + The following flags are defined: #define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch) #define KVM_IOEVENTFD_FLAG_PIO (1 << kvm_ioeventfd_flag_nr_pio) #define KVM_IOEVENTFD_FLAG_DEASSIGN (1 << kvm_ioeventfd_flag_nr_deassign) +#define KVM_IOEVENTFD_FLAG_VIRTIO_CCW_NOTIFY \ + (1 << kvm_ioeventfd_flag_nr_virtio_ccw_notify) If datamatch flag is set, the event will be signaled only if the written value to the registered address is equal to datamatch in struct kvm_ioeventfd. +For virtio-ccw devices, addr contains the subchannel id and datamatch the +virtqueue index. + 4.60 KVM_DIRTY_TLB @@ -1780,27 +1788,48 @@ registers, find a list below: PPC | KVM_REG_PPC_VPA_DTL | 128 PPC | KVM_REG_PPC_EPCR | 32 PPC | KVM_REG_PPC_EPR | 32 + PPC | KVM_REG_PPC_TCR | 32 + PPC | KVM_REG_PPC_TSR | 32 + PPC | KVM_REG_PPC_OR_TSR | 32 + PPC | KVM_REG_PPC_CLEAR_TSR | 32 + PPC | KVM_REG_PPC_MAS0 | 32 + PPC | KVM_REG_PPC_MAS1 | 32 + PPC | KVM_REG_PPC_MAS2 | 64 + PPC | KVM_REG_PPC_MAS7_3 | 64 + PPC | KVM_REG_PPC_MAS4 | 32 + PPC | KVM_REG_PPC_MAS6 | 32 + PPC | KVM_REG_PPC_MMUCFG | 32 + PPC | KVM_REG_PPC_TLB0CFG | 32 + PPC | KVM_REG_PPC_TLB1CFG | 32 + PPC | KVM_REG_PPC_TLB2CFG | 32 + PPC | KVM_REG_PPC_TLB3CFG | 32 + PPC | KVM_REG_PPC_TLB0PS | 32 + PPC | KVM_REG_PPC_TLB1PS | 32 + PPC | KVM_REG_PPC_TLB2PS | 32 + PPC | KVM_REG_PPC_TLB3PS | 32 + PPC | KVM_REG_PPC_EPTCFG | 32 + PPC | KVM_REG_PPC_ICP_STATE | 64 ARM registers are mapped using the lower 32 bits. The upper 16 of that is the register group type, or coprocessor number: ARM core registers have the following id bit patterns: - 0x4002 0000 0010 <index into the kvm_regs struct:16> + 0x4020 0000 0010 <index into the kvm_regs struct:16> ARM 32-bit CP15 registers have the following id bit patterns: - 0x4002 0000 000F <zero:1> <crn:4> <crm:4> <opc1:4> <opc2:3> + 0x4020 0000 000F <zero:1> <crn:4> <crm:4> <opc1:4> <opc2:3> ARM 64-bit CP15 registers have the following id bit patterns: - 0x4003 0000 000F <zero:1> <zero:4> <crm:4> <opc1:4> <zero:3> + 0x4030 0000 000F <zero:1> <zero:4> <crm:4> <opc1:4> <zero:3> ARM CCSIDR registers are demultiplexed by CSSELR value: - 0x4002 0000 0011 00 <csselr:8> + 0x4020 0000 0011 00 <csselr:8> ARM 32-bit VFP control registers have the following id bit patterns: - 0x4002 0000 0012 1 <regno:12> + 0x4020 0000 0012 1 <regno:12> ARM 64-bit FP registers have the following id bit patterns: - 0x4002 0000 0012 0 <regno:12> + 0x4030 0000 0012 0 <regno:12> 4.69 KVM_GET_ONE_REG @@ -2161,6 +2190,76 @@ header; first `n_valid' valid entries with contents from the data written, then `n_invalid' invalid entries, invalidating any previously valid entries found. +4.79 KVM_CREATE_DEVICE + +Capability: KVM_CAP_DEVICE_CTRL +Type: vm ioctl +Parameters: struct kvm_create_device (in/out) +Returns: 0 on success, -1 on error +Errors: + ENODEV: The device type is unknown or unsupported + EEXIST: Device already created, and this type of device may not + be instantiated multiple times + + Other error conditions may be defined by individual device types or + have their standard meanings. + +Creates an emulated device in the kernel. The file descriptor returned +in fd can be used with KVM_SET/GET/HAS_DEVICE_ATTR. + +If the KVM_CREATE_DEVICE_TEST flag is set, only test whether the +device type is supported (not necessarily whether it can be created +in the current vm). + +Individual devices should not define flags. Attributes should be used +for specifying any behavior that is not implied by the device type +number. + +struct kvm_create_device { + __u32 type; /* in: KVM_DEV_TYPE_xxx */ + __u32 fd; /* out: device handle */ + __u32 flags; /* in: KVM_CREATE_DEVICE_xxx */ +}; + +4.80 KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR + +Capability: KVM_CAP_DEVICE_CTRL +Type: device ioctl +Parameters: struct kvm_device_attr +Returns: 0 on success, -1 on error +Errors: + ENXIO: The group or attribute is unknown/unsupported for this device + EPERM: The attribute cannot (currently) be accessed this way + (e.g. read-only attribute, or attribute that only makes + sense when the device is in a different state) + + Other error conditions may be defined by individual device types. + +Gets/sets a specified piece of device configuration and/or state. The +semantics are device-specific. See individual device documentation in +the "devices" directory. As with ONE_REG, the size of the data +transferred is defined by the particular attribute. + +struct kvm_device_attr { + __u32 flags; /* no flags currently defined */ + __u32 group; /* device-defined */ + __u64 attr; /* group-defined */ + __u64 addr; /* userspace address of attr data */ +}; + +4.81 KVM_HAS_DEVICE_ATTR + +Capability: KVM_CAP_DEVICE_CTRL +Type: device ioctl +Parameters: struct kvm_device_attr +Returns: 0 on success, -1 on error +Errors: + ENXIO: The group or attribute is unknown/unsupported for this device + +Tests whether a device supports a particular attribute. A successful +return indicates the attribute is implemented. It does not necessarily +indicate that the attribute can be read or written in the device's +current state. "addr" is ignored. 4.77 KVM_ARM_VCPU_INIT @@ -2243,6 +2342,25 @@ and distributor interface, the ioctl must be called after calling KVM_CREATE_IRQCHIP, but before calling KVM_RUN on any of the VCPUs. Calling this ioctl twice for any of the base addresses will return -EEXIST. +4.82 KVM_PPC_RTAS_DEFINE_TOKEN + +Capability: KVM_CAP_PPC_RTAS +Architectures: ppc +Type: vm ioctl +Parameters: struct kvm_rtas_token_args +Returns: 0 on success, -1 on error + +Defines a token value for a RTAS (Run Time Abstraction Services) +service in order to allow it to be handled in the kernel. The +argument struct gives the name of the service, which must be the name +of a service that has a kernel-side implementation. If the token +value is non-zero, it will be associated with that service, and +subsequent RTAS calls by the guest specifying that token will be +handled by the kernel. If the token value is 0, then any token +associated with the service will be forgotten, and subsequent RTAS +calls by the guest for that service will be passed to userspace to be +handled. + 5. The kvm_run structure ------------------------ @@ -2646,3 +2764,19 @@ to receive the topmost interrupt vector. When disabled (args[0] == 0), behavior is as if this facility is unsupported. When this capability is enabled, KVM_EXIT_EPR can occur. + +6.6 KVM_CAP_IRQ_MPIC + +Architectures: ppc +Parameters: args[0] is the MPIC device fd + args[1] is the MPIC CPU number for this vcpu + +This capability connects the vcpu to an in-kernel MPIC device. + +6.7 KVM_CAP_IRQ_XICS + +Architectures: ppc +Parameters: args[0] is the XICS device fd + args[1] is the XICS CPU number (server ID) for this vcpu + +This capability connects the vcpu to an in-kernel XICS device. diff --git a/Documentation/virtual/kvm/devices/README b/Documentation/virtual/kvm/devices/README new file mode 100644 index 00000000000..34a69834124 --- /dev/null +++ b/Documentation/virtual/kvm/devices/README @@ -0,0 +1 @@ +This directory contains specific device bindings for KVM_CAP_DEVICE_CTRL. diff --git a/Documentation/virtual/kvm/devices/mpic.txt b/Documentation/virtual/kvm/devices/mpic.txt new file mode 100644 index 00000000000..8257397adc3 --- /dev/null +++ b/Documentation/virtual/kvm/devices/mpic.txt @@ -0,0 +1,53 @@ +MPIC interrupt controller +========================= + +Device types supported: + KVM_DEV_TYPE_FSL_MPIC_20 Freescale MPIC v2.0 + KVM_DEV_TYPE_FSL_MPIC_42 Freescale MPIC v4.2 + +Only one MPIC instance, of any type, may be instantiated. The created +MPIC will act as the system interrupt controller, connecting to each +vcpu's interrupt inputs. + +Groups: + KVM_DEV_MPIC_GRP_MISC + Attributes: + KVM_DEV_MPIC_BASE_ADDR (rw, 64-bit) + Base address of the 256 KiB MPIC register space. Must be + naturally aligned. A value of zero disables the mapping. + Reset value is zero. + + KVM_DEV_MPIC_GRP_REGISTER (rw, 32-bit) + Access an MPIC register, as if the access were made from the guest. + "attr" is the byte offset into the MPIC register space. Accesses + must be 4-byte aligned. + + MSIs may be signaled by using this attribute group to write + to the relevant MSIIR. + + KVM_DEV_MPIC_GRP_IRQ_ACTIVE (rw, 32-bit) + IRQ input line for each standard openpic source. 0 is inactive and 1 + is active, regardless of interrupt sense. + + For edge-triggered interrupts: Writing 1 is considered an activating + edge, and writing 0 is ignored. Reading returns 1 if a previously + signaled edge has not been acknowledged, and 0 otherwise. + + "attr" is the IRQ number. IRQ numbers for standard sources are the + byte offset of the relevant IVPR from EIVPR0, divided by 32. + +IRQ Routing: + + The MPIC emulation supports IRQ routing. Only a single MPIC device can + be instantiated. Once that device has been created, it's available as + irqchip id 0. + + This irqchip 0 has 256 interrupt pins, which expose the interrupts in + the main array of interrupt sources (a.k.a. "SRC" interrupts). + + The numbering is the same as the MPIC device tree binding -- based on + the register offset from the beginning of the sources array, without + regard to any subdivisions in chip documentation such as "internal" + or "external" interrupts. + + Access to non-SRC interrupts is not implemented through IRQ routing mechanisms. diff --git a/Documentation/virtual/kvm/devices/xics.txt b/Documentation/virtual/kvm/devices/xics.txt new file mode 100644 index 00000000000..42864935ac5 --- /dev/null +++ b/Documentation/virtual/kvm/devices/xics.txt @@ -0,0 +1,66 @@ +XICS interrupt controller + +Device type supported: KVM_DEV_TYPE_XICS + +Groups: + KVM_DEV_XICS_SOURCES + Attributes: One per interrupt source, indexed by the source number. + +This device emulates the XICS (eXternal Interrupt Controller +Specification) defined in PAPR. The XICS has a set of interrupt +sources, each identified by a 20-bit source number, and a set of +Interrupt Control Presentation (ICP) entities, also called "servers", +each associated with a virtual CPU. + +The ICP entities are created by enabling the KVM_CAP_IRQ_ARCH +capability for each vcpu, specifying KVM_CAP_IRQ_XICS in args[0] and +the interrupt server number (i.e. the vcpu number from the XICS's +point of view) in args[1] of the kvm_enable_cap struct. Each ICP has +64 bits of state which can be read and written using the +KVM_GET_ONE_REG and KVM_SET_ONE_REG ioctls on the vcpu. The 64 bit +state word has the following bitfields, starting at the +least-significant end of the word: + +* Unused, 16 bits + +* Pending interrupt priority, 8 bits + Zero is the highest priority, 255 means no interrupt is pending. + +* Pending IPI (inter-processor interrupt) priority, 8 bits + Zero is the highest priority, 255 means no IPI is pending. + +* Pending interrupt source number, 24 bits + Zero means no interrupt pending, 2 means an IPI is pending + +* Current processor priority, 8 bits + Zero is the highest priority, meaning no interrupts can be + delivered, and 255 is the lowest priority. + +Each source has 64 bits of state that can be read and written using +the KVM_GET_DEVICE_ATTR and KVM_SET_DEVICE_ATTR ioctls, specifying the +KVM_DEV_XICS_SOURCES attribute group, with the attribute number being +the interrupt source number. The 64 bit state word has the following +bitfields, starting from the least-significant end of the word: + +* Destination (server number), 32 bits + This specifies where the interrupt should be sent, and is the + interrupt server number specified for the destination vcpu. + +* Priority, 8 bits + This is the priority specified for this interrupt source, where 0 is + the highest priority and 255 is the lowest. An interrupt with a + priority of 255 will never be delivered. + +* Level sensitive flag, 1 bit + This bit is 1 for a level-sensitive interrupt source, or 0 for + edge-sensitive (or MSI). + +* Masked flag, 1 bit + This bit is set to 1 if the interrupt is masked (cannot be delivered + regardless of its priority), for example by the ibm,int-off RTAS + call, or 0 if it is not masked. + +* Pending flag, 1 bit + This bit is 1 if the source has a pending interrupt, otherwise 0. + +Only one XICS instance may be created per VM. |