5 files changed, 101 insertions, 6 deletions
diff --git a/Documentation/hwmon/emc6w201 b/Documentation/hwmon/emc6w201
new file mode 100644
index 00000000000..32f355aaf56
--- /dev/null
+++ b/Documentation/hwmon/emc6w201
@@ -0,0 +1,42 @@
+Kernel driver emc6w201
+======================
+
+Supported chips:
+  * SMSC EMC6W201
+    Prefix: 'emc6w201'
+    Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+    Datasheet: Not public
+
+Author: Jean Delvare <khali@linux-fr.org>
+
+
+Description
+-----------
+
+From the datasheet:
+
+"The EMC6W201 is an environmental monitoring device with automatic fan
+control capability and enhanced system acoustics for noise suppression.
+This ACPI compliant device provides hardware monitoring for up to six
+voltages (including its own VCC) and five external thermal sensors,
+measures the speed of up to five fans, and controls the speed of
+multiple DC fans using three Pulse Width Modulator (PWM) outputs. Note
+that it is possible to control more than three fans by connecting two
+fans to one PWM output. The EMC6W201 will be available in a 36-pin
+QFN package."
+
+The device is functionally close to the EMC6D100 series, but is
+register-incompatible.
+
+The driver currently only supports the monitoring of the voltages,
+temperatures and fan speeds. Limits can be changed. Alarms are not
+supported, and neither is fan speed control.
+
+
+Known Systems With EMC6W201
+---------------------------
+
+The EMC6W201 is a rare device, only found on a few systems, made in
+2005 and 2006. Known systems with this device:
+* Dell Precision 670 workstation
+* Gigabyte 2CEWH mainboard
diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg
index df02245d141..84d2623810f 100644
--- a/Documentation/hwmon/f71882fg
+++ b/Documentation/hwmon/f71882fg
@@ -6,6 +6,10 @@ Supported chips:
     Prefix: 'f71808e'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Not public
+  * Fintek F71808A
+    Prefix: 'f71808a'
+    Addresses scanned: none, address read from Super I/O config space
+    Datasheet: Not public
   * Fintek F71858FG
     Prefix: 'f71858fg'
     Addresses scanned: none, address read from Super I/O config space
diff --git a/Documentation/hwmon/fam15h_power b/Documentation/hwmon/fam15h_power
new file mode 100644
index 00000000000..a92918e0bd6
--- /dev/null
+++ b/Documentation/hwmon/fam15h_power
@@ -0,0 +1,37 @@
+Kernel driver fam15h_power
+==========================
+
+Supported chips:
+* AMD Family 15h Processors
+
+  Prefix: 'fam15h_power'
+  Addresses scanned: PCI space
+  Datasheets:
+  BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
+    (not yet published)
+
+Author: Andreas Herrmann <andreas.herrmann3@amd.com>
+
+Description
+-----------
+
+This driver permits reading of registers providing power information
+of AMD Family 15h processors.
+
+For AMD Family 15h processors the following power values can be
+calculated using different processor northbridge function registers:
+
+* BasePwrWatts: Specifies in watts the maximum amount of power
+  consumed by the processor for NB and logic external to the core.
+* ProcessorPwrWatts: Specifies in watts the maximum amount of power
+  the processor can support.
+* CurrPwrWatts: Specifies in watts the current amount of power being
+  consumed by the processor.
+
+This driver provides ProcessorPwrWatts and CurrPwrWatts:
+* power1_crit (ProcessorPwrWatts)
+* power1_input (CurrPwrWatts)
+
+On multi-node processors the calculated value is for the entire
+package and not for a single node. Thus the driver creates sysfs
+attributes only for internal node0 of a multi-node processor.
diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
index d2b56a4fd1f..0393c89277c 100644
--- a/Documentation/hwmon/k10temp
+++ b/Documentation/hwmon/k10temp
@@ -11,6 +11,7 @@ Supported chips:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
 * AMD Family 12h processors: "Llano"
 * AMD Family 14h processors: "Brazos" (C/E/G-Series)
+* AMD Family 15h processors: "Bulldozer"
 
   Prefix: 'k10temp'
   Addresses scanned: PCI space
@@ -40,7 +41,7 @@ Description
 -----------
 
 This driver permits reading of the internal temperature sensor of AMD
-Family 10h/11h/12h/14h processors.
+Family 10h/11h/12h/14h/15h processors.
 
 All these processors have a sensor, but on those for Socket F or AM2+,
 the sensor may return inconsistent values (erratum 319).  The driver
diff --git a/Documentation/hwmon/max6650 b/Documentation/hwmon/max6650
index c565650fcfc..58d9644a2bd 100644
--- a/Documentation/hwmon/max6650
+++ b/Documentation/hwmon/max6650
@@ -2,9 +2,13 @@ Kernel driver max6650
 =====================
 
 Supported chips:
-  * Maxim 6650 / 6651
+  * Maxim MAX6650
     Prefix: 'max6650'
-    Addresses scanned: I2C 0x1b, 0x1f, 0x48, 0x4b
+    Addresses scanned: none
+    Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf
+  * Maxim MAX6651
+    Prefix: 'max6651'
+    Addresses scanned: none
     Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf
 
 Authors:
@@ -15,10 +19,10 @@ Authors:
 Description
 -----------
 
-This driver implements support for the Maxim 6650/6651
+This driver implements support for the Maxim MAX6650 and MAX6651.
 
-The 2 devices are very similar, but the Maxim 6550 has a reduced feature
-set, e.g. only one fan-input, instead of 4 for the 6651.
+The 2 devices are very similar, but the MAX6550 has a reduced feature
+set, e.g. only one fan-input, instead of 4 for the MAX6651.
 
 The driver is not able to distinguish between the 2 devices.
 
@@ -36,6 +40,13 @@ fan1_div	rw	sets the speed range the inputs can handle. Legal
 			values are 1, 2, 4, and 8. Use lower values for
 			faster fans.
 
+Usage notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
 Module parameters
 -----------------