diff options
Diffstat (limited to 'Documentation')
59 files changed, 2189 insertions, 210 deletions
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block index 4873c759d53..c1eb41cb987 100644 --- a/Documentation/ABI/testing/sysfs-block +++ b/Documentation/ABI/testing/sysfs-block @@ -142,3 +142,67 @@ Description: with the previous I/O request are enabled. When set to 2, all merge tries are disabled. The default value is 0 - which enables all types of merge tries. + +What: /sys/block/<disk>/discard_alignment +Date: May 2011 +Contact: Martin K. Petersen <martin.petersen@oracle.com> +Description: + Devices that support discard functionality may + internally allocate space in units that are bigger than + the exported logical block size. The discard_alignment + parameter indicates how many bytes the beginning of the + device is offset from the internal allocation unit's + natural alignment. + +What: /sys/block/<disk>/<partition>/discard_alignment +Date: May 2011 +Contact: Martin K. Petersen <martin.petersen@oracle.com> +Description: + Devices that support discard functionality may + internally allocate space in units that are bigger than + the exported logical block size. The discard_alignment + parameter indicates how many bytes the beginning of the + partition is offset from the internal allocation unit's + natural alignment. + +What: /sys/block/<disk>/queue/discard_granularity +Date: May 2011 +Contact: Martin K. Petersen <martin.petersen@oracle.com> +Description: + Devices that support discard functionality may + internally allocate space using units that are bigger + than the logical block size. The discard_granularity + parameter indicates the size of the internal allocation + unit in bytes if reported by the device. Otherwise the + discard_granularity will be set to match the device's + physical block size. A discard_granularity of 0 means + that the device does not support discard functionality. + +What: /sys/block/<disk>/queue/discard_max_bytes +Date: May 2011 +Contact: Martin K. Petersen <martin.petersen@oracle.com> +Description: + Devices that support discard functionality may have + internal limits on the number of bytes that can be + trimmed or unmapped in a single operation. Some storage + protocols also have inherent limits on the number of + blocks that can be described in a single command. The + discard_max_bytes parameter is set by the device driver + to the maximum number of bytes that can be discarded in + a single operation. Discard requests issued to the + device must not exceed this limit. A discard_max_bytes + value of 0 means that the device does not support + discard functionality. + +What: /sys/block/<disk>/queue/discard_zeroes_data +Date: May 2011 +Contact: Martin K. Petersen <martin.petersen@oracle.com> +Description: + Devices that support discard functionality may return + stale or random data when a previously discarded block + is read back. This can cause problems if the filesystem + expects discarded blocks to be explicitly cleared. If a + device reports that it deterministically returns zeroes + when a discarded area is read the discard_zeroes_data + parameter will be set to one. Otherwise it will be 0 and + the result of reading a discarded area is undefined. diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index 36bf454ba85..349ecf26ce1 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -74,6 +74,15 @@ Description: hot-remove the PCI device and any of its children. Depends on CONFIG_HOTPLUG. +What: /sys/bus/pci/devices/.../pci_bus/.../rescan +Date: May 2011 +Contact: Linux PCI developers <linux-pci@vger.kernel.org> +Description: + Writing a non-zero value to this attribute will + force a rescan of the bus and all child buses, + and re-discover devices removed earlier from this + part of the device tree. Depends on CONFIG_HOTPLUG. + What: /sys/bus/pci/devices/.../rescan Date: January 2009 Contact: Linux PCI developers <linux-pci@vger.kernel.org> diff --git a/Documentation/ABI/testing/sysfs-ptp b/Documentation/ABI/testing/sysfs-ptp new file mode 100644 index 00000000000..d40d2b55050 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-ptp @@ -0,0 +1,98 @@ +What: /sys/class/ptp/ +Date: September 2010 +Contact: Richard Cochran <richardcochran@gmail.com> +Description: + This directory contains files and directories + providing a standardized interface to the ancillary + features of PTP hardware clocks. + +What: /sys/class/ptp/ptpN/ +Date: September 2010 +Contact: Richard Cochran <richardcochran@gmail.com> +Description: + This directory contains the attributes of the Nth PTP + hardware clock registered into the PTP class driver + subsystem. + +What: /sys/class/ptp/ptpN/clock_name +Date: September 2010 +Contact: Richard Cochran <richardcochran@gmail.com> +Description: + This file contains the name of the PTP hardware clock + as a human readable string. + +What: /sys/class/ptp/ptpN/max_adjustment +Date: September 2010 +Contact: Richard Cochran <richardcochran@gmail.com> +Description: + This file contains the PTP hardware clock's maximum + frequency adjustment value (a positive integer) in + parts per billion. + +What: /sys/class/ptp/ptpN/n_alarms +Date: September 2010 +Contact: Richard Cochran <richardcochran@gmail.com> +Description: + This file contains the number of periodic or one shot + alarms offer by the PTP hardware clock. + +What: /sys/class/ptp/ptpN/n_external_timestamps +Date: September 2010 +Contact: Richard Cochran <richardcochran@gmail.com> +Description: + This file contains the number of external timestamp + channels offered by the PTP hardware clock. + +What: /sys/class/ptp/ptpN/n_periodic_outputs +Date: September 2010 +Contact: Richard Cochran <richardcochran@gmail.com> +Description: + This file contains the number of programmable periodic + output channels offered by the PTP hardware clock. + +What: /sys/class/ptp/ptpN/pps_avaiable +Date: September 2010 +Contact: Richard Cochran <richardcochran@gmail.com> +Description: + This file indicates whether the PTP hardware clock + supports a Pulse Per Second to the host CPU. Reading + "1" means that the PPS is supported, while "0" means + not supported. + +What: /sys/class/ptp/ptpN/extts_enable +Date: September 2010 +Contact: Richard Cochran <richardcochran@gmail.com> +Description: + This write-only file enables or disables external + timestamps. To enable external timestamps, write the + channel index followed by a "1" into the file. + To disable external timestamps, write the channel + index followed by a "0" into the file. + +What: /sys/class/ptp/ptpN/fifo +Date: September 2010 +Contact: Richard Cochran <richardcochran@gmail.com> +Description: + This file provides timestamps on external events, in + the form of three integers: channel index, seconds, + and nanoseconds. + +What: /sys/class/ptp/ptpN/period +Date: September 2010 +Contact: Richard Cochran <richardcochran@gmail.com> +Description: + This write-only file enables or disables periodic + outputs. To enable a periodic output, write five + integers into the file: channel index, start time + seconds, start time nanoseconds, period seconds, and + period nanoseconds. To disable a periodic output, set + all the seconds and nanoseconds values to zero. + +What: /sys/class/ptp/ptpN/pps_enable +Date: September 2010 +Contact: Richard Cochran <richardcochran@gmail.com> +Description: + This write-only file enables or disables delivery of + PPS events to the Linux PPS subsystem. To enable PPS + events, write a "1" into the file. To disable events, + write a "0" into the file. diff --git a/Documentation/DocBook/.gitignore b/Documentation/DocBook/.gitignore index c6def352fe3..679034cbd68 100644 --- a/Documentation/DocBook/.gitignore +++ b/Documentation/DocBook/.gitignore @@ -8,3 +8,4 @@ *.dvi *.log *.out +media/ diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 8436b018c28..3cebfa0d161 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -73,7 +73,7 @@ installmandocs: mandocs ### #External programs used KERNELDOC = $(srctree)/scripts/kernel-doc -DOCPROC = $(objtree)/scripts/basic/docproc +DOCPROC = $(objtree)/scripts/docproc XMLTOFLAGS = -m $(srctree)/Documentation/DocBook/stylesheet.xsl XMLTOFLAGS += --skip-validation diff --git a/Documentation/DocBook/dvb/dvbapi.xml b/Documentation/DocBook/dvb/dvbapi.xml index ad8678d4891..9fad86ce7f5 100644 --- a/Documentation/DocBook/dvb/dvbapi.xml +++ b/Documentation/DocBook/dvb/dvbapi.xml @@ -35,6 +35,14 @@ <revhistory> <!-- Put document revisions here, newest first. --> <revision> + <revnumber>2.0.4</revnumber> + <date>2011-05-06</date> + <authorinitials>mcc</authorinitials> + <revremark> + Add more information about DVB APIv5, better describing the frontend GET/SET props ioctl's. + </revremark> +</revision> +<revision> <revnumber>2.0.3</revnumber> <date>2010-07-03</date> <authorinitials>mcc</authorinitials> diff --git a/Documentation/DocBook/dvb/dvbproperty.xml b/Documentation/DocBook/dvb/dvbproperty.xml index 97f397e2fb3..52d5e3c7cf6 100644 --- a/Documentation/DocBook/dvb/dvbproperty.xml +++ b/Documentation/DocBook/dvb/dvbproperty.xml @@ -1,6 +1,327 @@ -<section id="FE_GET_PROPERTY"> +<section id="FE_GET_SET_PROPERTY"> <title>FE_GET_PROPERTY/FE_SET_PROPERTY</title> +<programlisting> +/* Reserved fields should be set to 0 */ +struct dtv_property { + __u32 cmd; + union { + __u32 data; + struct { + __u8 data[32]; + __u32 len; + __u32 reserved1[3]; + void *reserved2; + } buffer; + } u; + int result; +} __attribute__ ((packed)); + +/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */ +#define DTV_IOCTL_MAX_MSGS 64 + +struct dtv_properties { + __u32 num; + struct dtv_property *props; +}; +</programlisting> + +<section id="FE_GET_PROPERTY"> +<title>FE_GET_PROPERTY</title> +<para>DESCRIPTION +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>This ioctl call returns one or more frontend properties. This call only + requires read-only access to the device.</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>SYNOPSIS +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>int ioctl(int fd, int request = <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link>, + dtv_properties ⋆props);</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>PARAMETERS +</para> +<informaltable><tgroup cols="2"><tbody><row><entry align="char"> +<para>int fd</para> +</entry><entry + align="char"> +<para>File descriptor returned by a previous call to open().</para> +</entry> + </row><row><entry + align="char"> +<para>int num</para> +</entry><entry + align="char"> +<para>Equals <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link> for this command.</para> +</entry> + </row><row><entry + align="char"> +<para>struct dtv_property *props</para> +</entry><entry + align="char"> +<para>Points to the location where the front-end property commands are stored.</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>ERRORS</para> +<informaltable><tgroup cols="2"><tbody><row> + <entry align="char"><para>EINVAL</para></entry> + <entry align="char"><para>Invalid parameter(s) received or number of parameters out of the range.</para></entry> + </row><row> + <entry align="char"><para>ENOMEM</para></entry> + <entry align="char"><para>Out of memory.</para></entry> + </row><row> + <entry align="char"><para>EFAULT</para></entry> + <entry align="char"><para>Failure while copying data from/to userspace.</para></entry> + </row><row> + <entry align="char"><para>EOPNOTSUPP</para></entry> + <entry align="char"><para>Property type not supported.</para></entry> + </row></tbody></tgroup></informaltable> +</section> + +<section id="FE_SET_PROPERTY"> +<title>FE_SET_PROPERTY</title> +<para>DESCRIPTION +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>This ioctl call sets one or more frontend properties. This call only + requires read-only access to the device.</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>SYNOPSIS +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>int ioctl(int fd, int request = <link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link>, + dtv_properties ⋆props);</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>PARAMETERS +</para> +<informaltable><tgroup cols="2"><tbody><row><entry align="char"> +<para>int fd</para> +</entry><entry + align="char"> +<para>File descriptor returned by a previous call to open().</para> +</entry> + </row><row><entry + align="char"> +<para>int num</para> +</entry><entry + align="char"> +<para>Equals <link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link> for this command.</para> +</entry> + </row><row><entry + align="char"> +<para>struct dtv_property *props</para> +</entry><entry + align="char"> +<para>Points to the location where the front-end property commands are stored.</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>ERRORS +</para> +<informaltable><tgroup cols="2"><tbody><row> + <entry align="char"><para>EINVAL</para></entry> + <entry align="char"><para>Invalid parameter(s) received or number of parameters out of the range.</para></entry> + </row><row> + <entry align="char"><para>ENOMEM</para></entry> + <entry align="char"><para>Out of memory.</para></entry> + </row><row> + <entry align="char"><para>EFAULT</para></entry> + <entry align="char"><para>Failure while copying data from/to userspace.</para></entry> + </row><row> + <entry align="char"><para>EOPNOTSUPP</para></entry> + <entry align="char"><para>Property type not supported.</para></entry> + </row></tbody></tgroup></informaltable> +</section> + +<para> +On <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link>/<link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link>, +the actual action is determined by the dtv_property cmd/data pairs. With one single ioctl, is possible to +get/set up to 64 properties. The actual meaning of each property is described on the next sections. +</para> + +<para>The Available frontend property types are:</para> +<programlisting> +#define DTV_UNDEFINED 0 +#define DTV_TUNE 1 +#define DTV_CLEAR 2 +#define DTV_FREQUENCY 3 +#define DTV_MODULATION 4 +#define DTV_BANDWIDTH_HZ 5 +#define DTV_INVERSION 6 +#define DTV_DISEQC_MASTER 7 +#define DTV_SYMBOL_RATE 8 +#define DTV_INNER_FEC 9 +#define DTV_VOLTAGE 10 +#define DTV_TONE 11 +#define DTV_PILOT 12 +#define DTV_ROLLOFF 13 +#define DTV_DISEQC_SLAVE_REPLY 14 +#define DTV_FE_CAPABILITY_COUNT 15 +#define DTV_FE_CAPABILITY 16 +#define DTV_DELIVERY_SYSTEM 17 +#define DTV_ISDBT_PARTIAL_RECEPTION 18 +#define DTV_ISDBT_SOUND_BROADCASTING 19 +#define DTV_ISDBT_SB_SUBCHANNEL_ID 20 +#define DTV_ISDBT_SB_SEGMENT_IDX 21 +#define DTV_ISDBT_SB_SEGMENT_COUNT 22 +#define DTV_ISDBT_LAYERA_FEC 23 +#define DTV_ISDBT_LAYERA_MODULATION 24 +#define DTV_ISDBT_LAYERA_SEGMENT_COUNT 25 +#define DTV_ISDBT_LAYERA_TIME_INTERLEAVING 26 +#define DTV_ISDBT_LAYERB_FEC 27 +#define DTV_ISDBT_LAYERB_MODULATION 28 +#define DTV_ISDBT_LAYERB_SEGMENT_COUNT 29 +#define DTV_ISDBT_LAYERB_TIME_INTERLEAVING 30 +#define DTV_ISDBT_LAYERC_FEC 31 +#define DTV_ISDBT_LAYERC_MODULATION 32 +#define DTV_ISDBT_LAYERC_SEGMENT_COUNT 33 +#define DTV_ISDBT_LAYERC_TIME_INTERLEAVING 34 +#define DTV_API_VERSION 35 +#define DTV_CODE_RATE_HP 36 +#define DTV_CODE_RATE_LP 37 +#define DTV_GUARD_INTERVAL 38 +#define DTV_TRANSMISSION_MODE 39 +#define DTV_HIERARCHY 40 +#define DTV_ISDBT_LAYER_ENABLED 41 +#define DTV_ISDBS_TS_ID 42 +</programlisting> + +<section id="fe_property_common"> + <title>Parameters that are common to all Digital TV standards</title> + <section id="DTV_FREQUENCY"> + <title><constant>DTV_FREQUENCY</constant></title> + + <para>Central frequency of the channel, in HZ.</para> + + <para>Notes:</para> + <para>1)For ISDB-T, the channels are usually transmitted with an offset of 143kHz. + E.g. a valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of + the channel which is 6MHz.</para> + + <para>2)As in ISDB-Tsb the channel consists of only one or three segments the + frequency step is 429kHz, 3*429 respectively. As for ISDB-T the + central frequency of the channel is expected.</para> + </section> + + <section id="DTV_BANDWIDTH_HZ"> + <title><constant>DTV_BANDWIDTH_HZ</constant></title> + + <para>Bandwidth for the channel, in HZ.</para> + + <para>Possible values: + <constant>1712000</constant>, + <constant>5000000</constant>, + <constant>6000000</constant>, + <constant>7000000</constant>, + <constant>8000000</constant>, + <constant>10000000</constant>. + </para> + + <para>Notes:</para> + + <para>1) For ISDB-T it should be always 6000000Hz (6MHz)</para> + <para>2) For ISDB-Tsb it can vary depending on the number of connected segments</para> + <para>3) Bandwidth doesn't apply for DVB-C transmissions, as the bandwidth + for DVB-C depends on the symbol rate</para> + <para>4) Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from + other parameters (DTV_ISDBT_SB_SEGMENT_IDX, + DTV_ISDBT_SB_SEGMENT_COUNT).</para> + <para>5) DVB-T supports 6, 7 and 8MHz.</para> + <para>6) In addition, DVB-T2 supports 1.172, 5 and 10MHz.</para> + </section> + + <section id="DTV_DELIVERY_SYSTEM"> + <title><constant>DTV_DELIVERY_SYSTEM</constant></title> + + <para>Specifies the type of Delivery system</para> + + <para>Possible values: </para> +<programlisting> +typedef enum fe_delivery_system { + SYS_UNDEFINED, + SYS_DVBC_ANNEX_AC, + SYS_DVBC_ANNEX_B, + SYS_DVBT, + SYS_DSS, + SYS_DVBS, + SYS_DVBS2, + SYS_DVBH, + SYS_ISDBT, + SYS_ISDBS, + SYS_ISDBC, + SYS_ATSC, + SYS_ATSCMH, + SYS_DMBTH, + SYS_CMMB, + SYS_DAB, + SYS_DVBT2, +} fe_delivery_system_t; +</programlisting> + + </section> + + <section id="DTV_TRANSMISSION_MODE"> + <title><constant>DTV_TRANSMISSION_MODE</constant></title> + + <para>Specifies the number of carriers used by the standard</para> + + <para>Possible values are:</para> +<programlisting> +typedef enum fe_transmit_mode { + TRANSMISSION_MODE_2K, + TRANSMISSION_MODE_8K, + TRANSMISSION_MODE_AUTO, + TRANSMISSION_MODE_4K, + TRANSMISSION_MODE_1K, + TRANSMISSION_MODE_16K, + TRANSMISSION_MODE_32K, +} fe_transmit_mode_t; +</programlisting> + + <para>Notes:</para> + <para>1) ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called + 'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K</para> + + <para>2) If <constant>DTV_TRANSMISSION_MODE</constant> is set the <constant>TRANSMISSION_MODE_AUTO</constant> the + hardware will try to find the correct FFT-size (if capable) and will + use TMCC to fill in the missing parameters.</para> + <para>3) DVB-T specifies 2K and 8K as valid sizes.</para> + <para>4) DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K.</para> + </section> + + <section id="DTV_GUARD_INTERVAL"> + <title><constant>DTV_GUARD_INTERVAL</constant></title> + + <para>Possible values are:</para> +<programlisting> +typedef enum fe_guard_interval { + GUARD_INTERVAL_1_32, + GUARD_INTERVAL_1_16, + GUARD_INTERVAL_1_8, + GUARD_INTERVAL_1_4, + GUARD_INTERVAL_AUTO, + GUARD_INTERVAL_1_128, + GUARD_INTERVAL_19_128, + GUARD_INTERVAL_19_256, +} fe_guard_interval_t; +</programlisting> + + <para>Notes:</para> + <para>1) If <constant>DTV_GUARD_INTERVAL</constant> is set the <constant>GUARD_INTERVAL_AUTO</constant> the hardware will + try to find the correct guard interval (if capable) and will use TMCC to fill + in the missing parameters.</para> + <para>2) Intervals 1/128, 19/128 and 19/256 are used only for DVB-T2 at present</para> + </section> +</section> + <section id="isdbt"> <title>ISDB-T frontend</title> <para>This section describes shortly what are the possible parameters in the Linux @@ -32,73 +353,6 @@ <para>Parameters used by ISDB-T and ISDB-Tsb.</para> - <section id="isdbt-parms"> - <title>Parameters that are common with DVB-T and ATSC</title> - - <section id="isdbt-freq"> - <title><constant>DTV_FREQUENCY</constant></title> - - <para>Central frequency of the channel.</para> - - <para>For ISDB-T the channels are usually transmitted with an offset of 143kHz. E.g. a - valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of - the channel which is 6MHz.</para> - - <para>As in ISDB-Tsb the channel consists of only one or three segments the - frequency step is 429kHz, 3*429 respectively. As for ISDB-T the - central frequency of the channel is expected.</para> - </section> - - <section id="isdbt-bw"> - <title><constant>DTV_BANDWIDTH_HZ</constant> (optional)</title> - - <para>Possible values:</para> - - <para>For ISDB-T it should be always 6000000Hz (6MHz)</para> - <para>For ISDB-Tsb it can vary depending on the number of connected segments</para> - - <para>Note: Hardware specific values might be given here, but standard - applications should not bother to set a value to this field as - standard demods are ignoring it anyway.</para> - - <para>Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from - other parameters (DTV_ISDBT_SB_SEGMENT_IDX, - DTV_ISDBT_SB_SEGMENT_COUNT).</para> - </section> - - <section id="isdbt-delivery-sys"> - <title><constant>DTV_DELIVERY_SYSTEM</constant></title> - - <para>Possible values: <constant>SYS_ISDBT</constant></para> - </section> - - <section id="isdbt-tx-mode"> - <title><constant>DTV_TRANSMISSION_MODE</constant></title> - - <para>ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called - 'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K</para> - - <para>Possible values: <constant>TRANSMISSION_MODE_2K</constant>, <constant>TRANSMISSION_MODE_8K</constant>, - <constant>TRANSMISSION_MODE_AUTO</constant>, <constant>TRANSMISSION_MODE_4K</constant></para> - - <para>If <constant>DTV_TRANSMISSION_MODE</constant> is set the <constant>TRANSMISSION_MODE_AUTO</constant> the - hardware will try to find the correct FFT-size (if capable) and will - use TMCC to fill in the missing parameters.</para> - - <para><constant>TRANSMISSION_MODE_4K</constant> is added at the same time as the other new parameters.</para> - </section> - - <section id="isdbt-guard-interval"> - <title><constant>DTV_GUARD_INTERVAL</constant></title> - - <para>Possible values: <constant>GUARD_INTERVAL_1_32</constant>, <constant>GUARD_INTERVAL_1_16</constant>, <constant>GUARD_INTERVAL_1_8</constant>, - <constant>GUARD_INTERVAL_1_4</constant>, <constant>GUARD_INTERVAL_AUTO</constant></para> - - <para>If <constant>DTV_GUARD_INTERVAL</constant> is set the <constant>GUARD_INTERVAL_AUTO</constant> the hardware will - try to find the correct guard interval (if capable) and will use TMCC to fill - in the missing parameters.</para> - </section> - </section> <section id="isdbt-new-parms"> <title>ISDB-T only parameters</title> @@ -314,5 +568,20 @@ </section> </section> </section> + <section id="dvbt2-params"> + <title>DVB-T2 parameters</title> + + <para>This section covers parameters that apply only to the DVB-T2 delivery method. DVB-T2 + support is currently in the early stages development so expect this section to grow + and become more detailed with time.</para> + + <section id="dvbt2-plp-id"> + <title><constant>DTV_DVBT2_PLP_ID</constant></title> + + <para>DVB-T2 supports Physical Layer Pipes (PLP) to allow transmission of + many data types via a single multiplex. The API will soon support this + at which point this section will be expanded.</para> + </section> + </section> </section> </section> diff --git a/Documentation/DocBook/dvb/frontend.h.xml b/Documentation/DocBook/dvb/frontend.h.xml index d08e0d40141..d792f789ad3 100644 --- a/Documentation/DocBook/dvb/frontend.h.xml +++ b/Documentation/DocBook/dvb/frontend.h.xml @@ -176,14 +176,20 @@ typedef enum fe_transmit_mode { TRANSMISSION_MODE_2K, TRANSMISSION_MODE_8K, TRANSMISSION_MODE_AUTO, - TRANSMISSION_MODE_4K + TRANSMISSION_MODE_4K, + TRANSMISSION_MODE_1K, + TRANSMISSION_MODE_16K, + TRANSMISSION_MODE_32K, } fe_transmit_mode_t; typedef enum fe_bandwidth { BANDWIDTH_8_MHZ, BANDWIDTH_7_MHZ, BANDWIDTH_6_MHZ, - BANDWIDTH_AUTO + BANDWIDTH_AUTO, + BANDWIDTH_5_MHZ, + BANDWIDTH_10_MHZ, + BANDWIDTH_1_712_MHZ, } fe_bandwidth_t; @@ -192,7 +198,10 @@ typedef enum fe_guard_interval { GUARD_INTERVAL_1_16, GUARD_INTERVAL_1_8, GUARD_INTERVAL_1_4, - GUARD_INTERVAL_AUTO + GUARD_INTERVAL_AUTO, + GUARD_INTERVAL_1_128, + GUARD_INTERVAL_19_128, + GUARD_INTERVAL_19_256, } fe_guard_interval_t; @@ -306,7 +315,9 @@ struct dvb_frontend_event { #define DTV_ISDBS_TS_ID 42 -#define DTV_MAX_COMMAND DTV_ISDBS_TS_ID +#define DTV_DVBT2_PLP_ID 43 + +#define DTV_MAX_COMMAND DTV_DVBT2_PLP_ID typedef enum fe_pilot { PILOT_ON, @@ -338,6 +349,7 @@ typedef enum fe_delivery_system { SYS_DMBTH, SYS_CMMB, SYS_DAB, + SYS_DVBT2, } fe_delivery_system_t; struct dtv_cmds_h { diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl index fea63b45471..c8abb23ef1e 100644 --- a/Documentation/DocBook/media-entities.tmpl +++ b/Documentation/DocBook/media-entities.tmpl @@ -270,6 +270,7 @@ <!ENTITY sub-write SYSTEM "v4l/func-write.xml"> <!ENTITY sub-io SYSTEM "v4l/io.xml"> <!ENTITY sub-grey SYSTEM "v4l/pixfmt-grey.xml"> +<!ENTITY sub-m420 SYSTEM "v4l/pixfmt-m420.xml"> <!ENTITY sub-nv12 SYSTEM "v4l/pixfmt-nv12.xml"> <!ENTITY sub-nv12m SYSTEM "v4l/pixfmt-nv12m.xml"> <!ENTITY sub-nv12mt SYSTEM "v4l/pixfmt-nv12mt.xml"> @@ -295,6 +296,7 @@ <!ENTITY sub-srggb8 SYSTEM "v4l/pixfmt-srggb8.xml"> <!ENTITY sub-y10 SYSTEM "v4l/pixfmt-y10.xml"> <!ENTITY sub-y12 SYSTEM "v4l/pixfmt-y12.xml"> +<!ENTITY sub-y10b SYSTEM "v4l/pixfmt-y10b.xml"> <!ENTITY sub-pixfmt SYSTEM "v4l/pixfmt.xml"> <!ENTITY sub-cropcap SYSTEM "v4l/vidioc-cropcap.xml"> <!ENTITY sub-dbg-g-register SYSTEM "v4l/vidioc-dbg-g-register.xml"> diff --git a/Documentation/DocBook/v4l/pixfmt-m420.xml b/Documentation/DocBook/v4l/pixfmt-m420.xml new file mode 100644 index 00000000000..ce4bc019e5c --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-m420.xml @@ -0,0 +1,147 @@ + <refentry id="V4L2-PIX-FMT-M420"> + <refmeta> + <refentrytitle>V4L2_PIX_FMT_M420 ('M420')</refentrytitle> + &manvol; + </refmeta> + <refnamediv> + <refname><constant>V4L2_PIX_FMT_M420</constant></refname> + <refpurpose>Format with ½ horizontal and vertical chroma + resolution, also known as YUV 4:2:0. Hybrid plane line-interleaved + layout.</refpurpose> + </refnamediv> + <refsect1> + <title>Description</title> + + <para>M420 is a YUV format with ½ horizontal and vertical chroma + subsampling (YUV 4:2:0). Pixels are organized as interleaved luma and + chroma planes. Two lines of luma data are followed by one line of chroma + data.</para> + <para>The luma plane has one byte per pixel. The chroma plane contains + interleaved CbCr pixels subsampled by ½ in the horizontal and + vertical directions. Each CbCr pair belongs to four pixels. For example, +Cb<subscript>0</subscript>/Cr<subscript>0</subscript> belongs to +Y'<subscript>00</subscript>, Y'<subscript>01</subscript>, +Y'<subscript>10</subscript>, Y'<subscript>11</subscript>.</para> + + <para>All line lengths are identical: if the Y lines include pad bytes + so do the CbCr lines.</para> + + <example> + <title><constant>V4L2_PIX_FMT_M420</constant> 4 × 4 +pixel image</title> + + <formalpara> + <title>Byte Order.</title> + <para>Each cell is one byte. + <informaltable frame="none"> + <tgroup cols="5" align="center"> + <colspec align="left" colwidth="2*" /> + <tbody valign="top"> + <row> + <entry>start + 0:</entry> + <entry>Y'<subscript>00</subscript></entry> + <entry>Y'<subscript>01</subscript></entry> + <entry>Y'<subscript>02</subscript></entry> + <entry>Y'<subscript>03</subscript></entry> + </row> + <row> + <entry>start + 4:</entry> + <entry>Y'<subscript>10</subscript></entry> + <entry>Y'<subscript>11</subscript></entry> + <entry>Y'<subscript>12</subscript></entry> + <entry>Y'<subscript>13</subscript></entry> + </row> + <row> + <entry>start + 8:</entry> + <entry>Cb<subscript>00</subscript></entry> + <entry>Cr<subscript>00</subscript></entry> + <entry>Cb<subscript>01</subscript></entry> + <entry>Cr<subscript>01</subscript></entry> + </row> + <row> + <entry>start + 16:</entry> + <entry>Y'<subscript>20</subscript></entry> + <entry>Y'<subscript>21</subscript></entry> + <entry>Y'<subscript>22</subscript></entry> + <entry>Y'<subscript>23</subscript></entry> + </row> + <row> + <entry>start + 20:</entry> + <entry>Y'<subscript>30</subscript></entry> + <entry>Y'<subscript>31</subscript></entry> + <entry>Y'<subscript>32</subscript></entry> + <entry>Y'<subscript>33</subscript></entry> + </row> + <row> + <entry>start + 24:</entry> + <entry>Cb<subscript>10</subscript></entry> + <entry>Cr<subscript>10</subscript></entry> + <entry>Cb<subscript>11</subscript></entry> + <entry>Cr<subscript>11</subscript></entry> + </row> + </tbody> + </tgroup> + </informaltable> + </para> + </formalpara> + + <formalpara> + <title>Color Sample Location.</title> + <para> + <informaltable frame="none"> + <tgroup cols="7" align="center"> + <tbody valign="top"> + <row> + <entry></entry> + <entry>0</entry><entry></entry><entry>1</entry><entry></entry> + <entry>2</entry><entry></entry><entry>3</entry> + </row> + <row> + <entry>0</entry> + <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry> + <entry>Y</entry><entry></entry><entry>Y</entry> + </row> + <row> + <entry></entry> + <entry></entry><entry>C</entry><entry></entry><entry></entry> + <entry></entry><entry>C</entry><entry></entry> + </row> + <row> + <entry>1</entry> + <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry> + <entry>Y</entry><entry></entry><entry>Y</entry> + </row> + <row> + <entry></entry> + </row> + <row> + <entry>2</entry> + <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry> + <entry>Y</entry><entry></entry><entry>Y</entry> + </row> + <row> + <entry></entry> + <entry></entry><entry>C</entry><entry></entry><entry></entry> + <entry></entry><entry>C</entry><entry></entry> + </row> + <row> + <entry>3</entry> + <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry> + <entry>Y</entry><entry></entry><entry>Y</entry> + </row> + </tbody> + </tgroup> + </informaltable> + </para> + </formalpara> + </example> + </refsect1> + </refentry> + + <!-- +Local Variables: +mode: sgml +sgml-parent-document: "pixfmt.sgml" +indent-tabs-mode: nil +End: + --> diff --git a/Documentation/DocBook/v4l/pixfmt-y10b.xml b/Documentation/DocBook/v4l/pixfmt-y10b.xml new file mode 100644 index 00000000000..adb0ad808c9 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-y10b.xml @@ -0,0 +1,43 @@ +<refentry id="V4L2-PIX-FMT-Y10BPACK"> + <refmeta> + <refentrytitle>V4L2_PIX_FMT_Y10BPACK ('Y10B')</refentrytitle> + &manvol; + </refmeta> + <refnamediv> + <refname><constant>V4L2_PIX_FMT_Y10BPACK</constant></refname> + <refpurpose>Grey-scale image as a bit-packed array</refpurpose> + </refnamediv> + <refsect1> + <title>Description</title> + + <para>This is a packed grey-scale image format with a depth of 10 bits per + pixel. Pixels are stored in a bit-packed array of 10bit bits per pixel, + with no padding between them and with the most significant bits coming + first from the left.</para> + + <example> + <title><constant>V4L2_PIX_FMT_Y10BPACK</constant> 4 pixel data stream taking 5 bytes</title> + + <formalpara> + <title>Bit-packed representation</title> + <para>pixels cross the byte boundary and have a ratio of 5 bytes for each 4 + pixels. + <informaltable frame="all"> + <tgroup cols="5" align="center"> + <colspec align="left" colwidth="2*" /> + <tbody valign="top"> + <row> + <entry>Y'<subscript>00[9:2]</subscript></entry> + <entry>Y'<subscript>00[1:0]</subscript>Y'<subscript>01[9:4]</subscript></entry> + <entry>Y'<subscript>01[3:0]</subscript>Y'<subscript>02[9:6]</subscript></entry> + <entry>Y'<subscript>02[5:0]</subscript>Y'<subscript>03[9:8]</subscript></entry> + <entry>Y'<subscript>03[7:0]</subscript></entry> + </row> + </tbody> + </tgroup> + </informaltable> + </para> + </formalpara> + </example> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/v4l/pixfmt.xml b/Documentation/DocBook/v4l/pixfmt.xml index 40af4beb48b..dbfe3b08435 100644 --- a/Documentation/DocBook/v4l/pixfmt.xml +++ b/Documentation/DocBook/v4l/pixfmt.xml @@ -697,6 +697,7 @@ information.</para> &sub-grey; &sub-y10; &sub-y12; + &sub-y10b; &sub-y16; &sub-yuyv; &sub-uyvy; @@ -712,6 +713,7 @@ information.</para> &sub-nv12m; &sub-nv12mt; &sub-nv16; + &sub-m420; </section> <section> diff --git a/Documentation/DocBook/v4l/subdev-formats.xml b/Documentation/DocBook/v4l/subdev-formats.xml index d7ccd25edcc..a26b10c0785 100644 --- a/Documentation/DocBook/v4l/subdev-formats.xml +++ b/Documentation/DocBook/v4l/subdev-formats.xml @@ -2522,5 +2522,51 @@ </tgroup> </table> </section> + + <section> + <title>JPEG Compressed Formats</title> + + <para>Those data formats consist of an ordered sequence of 8-bit bytes + obtained from JPEG compression process. Additionally to the + <constant>_JPEG</constant> prefix the format code is made of + the following information. + <itemizedlist> + <listitem>The number of bus samples per entropy encoded byte.</listitem> + <listitem>The bus width.</listitem> + </itemizedlist> + + <para>For instance, for a JPEG baseline process and an 8-bit bus width + the format will be named <constant>V4L2_MBUS_FMT_JPEG_1X8</constant>. + </para> + </para> + + <para>The following table lists existing JPEG compressed formats.</para> + + <table pgwide="0" frame="none" id="v4l2-mbus-pixelcode-jpeg"> + <title>JPEG Formats</title> + <tgroup cols="3"> + <colspec colname="id" align="left" /> + <colspec colname="code" align="left"/> + <colspec colname="remarks" align="left"/> + <thead> + <row> + <entry>Identifier</entry> + <entry>Code</entry> + <entry>Remarks</entry> + </row> + </thead> + <tbody valign="top"> + <row id="V4L2-MBUS-FMT-JPEG-1X8"> + <entry>V4L2_MBUS_FMT_JPEG_1X8</entry> + <entry>0x4001</entry> + <entry>Besides of its usage for the parallel bus this format is + recommended for transmission of JPEG data over MIPI CSI bus + using the User Defined 8-bit Data types. + </entry> + </row> + </tbody> + </tgroup> + </table> + </section> </section> </section> diff --git a/Documentation/DocBook/v4l/videodev2.h.xml b/Documentation/DocBook/v4l/videodev2.h.xml index 2b796a2ee98..c50536a4f59 100644 --- a/Documentation/DocBook/v4l/videodev2.h.xml +++ b/Documentation/DocBook/v4l/videodev2.h.xml @@ -311,6 +311,9 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> { #define <link linkend="V4L2-PIX-FMT-Y10">V4L2_PIX_FMT_Y10</link> v4l2_fourcc('Y', '1', '0', ' ') /* 10 Greyscale */ #define <link linkend="V4L2-PIX-FMT-Y16">V4L2_PIX_FMT_Y16</link> v4l2_fourcc('Y', '1', '6', ' ') /* 16 Greyscale */ +/* Grey bit-packed formats */ +#define <link linkend="V4L2-PIX-FMT-Y10BPACK">V4L2_PIX_FMT_Y10BPACK</link> v4l2_fourcc('Y', '1', '0', 'B') /* 10 Greyscale bit-packed */ + /* Palette formats */ #define <link linkend="V4L2-PIX-FMT-PAL8">V4L2_PIX_FMT_PAL8</link> v4l2_fourcc('P', 'A', 'L', '8') /* 8 8-bit palette */ @@ -333,6 +336,7 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> { #define <link linkend="V4L2-PIX-FMT-YUV420">V4L2_PIX_FMT_YUV420</link> v4l2_fourcc('Y', 'U', '1', '2') /* 12 YUV 4:2:0 */ #define <link linkend="V4L2-PIX-FMT-HI240">V4L2_PIX_FMT_HI240</link> v4l2_fourcc('H', 'I', '2', '4') /* 8 8-bit color */ #define <link linkend="V4L2-PIX-FMT-HM12">V4L2_PIX_FMT_HM12</link> v4l2_fourcc('H', 'M', '1', '2') /* 8 YUV 4:2:0 16x16 macroblocks */ +#define <link linkend="V4L2-PIX-FMT-M420">V4L2_PIX_FMT_M420</link> v4l2_fourcc('M', '4', '2', '0') /* 12 YUV 4:2:0 2 lines y, 1 line uv interleaved */ /* two planes -- one Y, one Cr + Cb interleaved */ #define <link linkend="V4L2-PIX-FMT-NV12">V4L2_PIX_FMT_NV12</link> v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */ diff --git a/Documentation/HOWTO b/Documentation/HOWTO index 365bda9a0d9..81bc1a9ab9d 100644 --- a/Documentation/HOWTO +++ b/Documentation/HOWTO @@ -209,7 +209,7 @@ tools. One such tool that is particularly recommended is the Linux Cross-Reference project, which is able to present source code in a self-referential, indexed webpage format. An excellent up-to-date repository of the kernel code may be found at: - http://users.sosdg.org/~qiyong/lxr/ + http://lxr.linux.no/+trees The development process diff --git a/Documentation/IRQ-affinity.txt b/Documentation/IRQ-affinity.txt index b4a615b7840..7890fae1852 100644 --- a/Documentation/IRQ-affinity.txt +++ b/Documentation/IRQ-affinity.txt @@ -4,10 +4,11 @@ ChangeLog: SMP IRQ affinity -/proc/irq/IRQ#/smp_affinity specifies which target CPUs are permitted -for a given IRQ source. It's a bitmask of allowed CPUs. It's not allowed -to turn off all CPUs, and if an IRQ controller does not support IRQ -affinity then the value will not change from the default 0xffffffff. +/proc/irq/IRQ#/smp_affinity and /proc/irq/IRQ#/smp_affinity_list specify +which target CPUs are permitted for a given IRQ source. It's a bitmask +(smp_affinity) or cpu list (smp_affinity_list) of allowed CPUs. It's not +allowed to turn off all CPUs, and if an IRQ controller does not support +IRQ affinity then the value will not change from the default of all cpus. /proc/irq/default_smp_affinity specifies default affinity mask that applies to all non-active IRQs. Once IRQ is allocated/activated its affinity bitmask @@ -54,3 +55,11 @@ round-trip min/avg/max = 0.1/0.5/585.4 ms This time around IRQ44 was delivered only to the last four processors. i.e counters for the CPU0-3 did not change. +Here is an example of limiting that same irq (44) to cpus 1024 to 1031: + +[root@moon 44]# echo 1024-1031 > smp_affinity +[root@moon 44]# cat smp_affinity +1024-1031 + +Note that to do this with a bitmask would require 32 bitmasks of zero +to follow the pertinent one. diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index e439cd0d337..569f3532e13 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -714,10 +714,11 @@ Jeff Garzik, "Linux kernel patch submission format". <http://linux.yyz.us/patch-format.html> Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer". - <http://www.kroah.com/log/2005/03/31/> - <http://www.kroah.com/log/2005/07/08/> - <http://www.kroah.com/log/2005/10/19/> - <http://www.kroah.com/log/2006/01/11/> + <http://www.kroah.com/log/linux/maintainer.html> + <http://www.kroah.com/log/linux/maintainer-02.html> + <http://www.kroah.com/log/linux/maintainer-03.html> + <http://www.kroah.com/log/linux/maintainer-04.html> + <http://www.kroah.com/log/linux/maintainer-05.html> NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people! <http://marc.theaimsgroup.com/?l=linux-kernel&m=112112749912944&w=2> diff --git a/Documentation/blockdev/cciss.txt b/Documentation/blockdev/cciss.txt index 89698e8df7d..c00c6a5ab21 100644 --- a/Documentation/blockdev/cciss.txt +++ b/Documentation/blockdev/cciss.txt @@ -169,3 +169,18 @@ is issued which positions the tape to a known position. Typically you must rewind the tape (by issuing "mt -f /dev/st0 rewind" for example) before i/o can proceed again to a tape drive which was reset. +There is a cciss_tape_cmds module parameter which can be used to make cciss +allocate more commands for use by tape drives. Ordinarily only a few commands +(6) are allocated for tape drives because tape drives are slow and +infrequently used and the primary purpose of Smart Array controllers is to +act as a RAID controller for disk drives, so the vast majority of commands +are allocated for disk devices. However, if you have more than a few tape +drives attached to a smart array, the default number of commands may not be +enought (for example, if you have 8 tape drives, you could only rewind 6 +at one time with the default number of commands.) The cciss_tape_cmds module +parameter allows more commands (up to 16 more) to be allocated for use by +tape drives. For example: + + insmod cciss.ko cciss_tape_cmds=16 + +Or, as a kernel boot parameter passed in via grub: cciss.cciss_tape_cmds=8 diff --git a/Documentation/cachetlb.txt b/Documentation/cachetlb.txt index 9164ae3b83b..9b728dc1753 100644 --- a/Documentation/cachetlb.txt +++ b/Documentation/cachetlb.txt @@ -16,7 +16,7 @@ on all processors in the system. Don't let this scare you into thinking SMP cache/tlb flushing must be so inefficient, this is in fact an area where many optimizations are possible. For example, if it can be proven that a user address space has never executed -on a cpu (see vma->cpu_vm_mask), one need not perform a flush +on a cpu (see mm_cpumask()), one need not perform a flush for this address space on that cpu. First, the TLB flushing interfaces, since they are the simplest. The diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt index edb7ae19e86..2c6be0377f5 100644 --- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt +++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt @@ -74,3 +74,57 @@ Example: interrupt-parent = <&mpic>; phy-handle = <&phy0> }; + +* Gianfar PTP clock nodes + +General Properties: + + - compatible Should be "fsl,etsec-ptp" + - reg Offset and length of the register set for the device + - interrupts There should be at least two interrupts. Some devices + have as many as four PTP related interrupts. + +Clock Properties: + + - fsl,tclk-period Timer reference clock period in nanoseconds. + - fsl,tmr-prsc Prescaler, divides the output clock. + - fsl,tmr-add Frequency compensation value. + - fsl,tmr-fiper1 Fixed interval period pulse generator. + - fsl,tmr-fiper2 Fixed interval period pulse generator. + - fsl,max-adj Maximum frequency adjustment in parts per billion. + + These properties set the operational parameters for the PTP + clock. You must choose these carefully for the clock to work right. + Here is how to figure good values: + + TimerOsc = system clock MHz + tclk_period = desired clock period nanoseconds + NominalFreq = 1000 / tclk_period MHz + FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0) + tmr_add = ceil(2^32 / FreqDivRatio) + OutputClock = NominalFreq / tmr_prsc MHz + PulseWidth = 1 / OutputClock microseconds + FiperFreq1 = desired frequency in Hz + FiperDiv1 = 1000000 * OutputClock / FiperFreq1 + tmr_fiper1 = tmr_prsc * tclk_period * FiperDiv1 - tclk_period + max_adj = 1000000000 * (FreqDivRatio - 1.0) - 1 + + The calculation for tmr_fiper2 is the same as for tmr_fiper1. The + driver expects that tmr_fiper1 will be correctly set to produce a 1 + Pulse Per Second (PPS) signal, since this will be offered to the PPS + subsystem to synchronize the Linux clock. + +Example: + + ptp_clock@24E00 { + compatible = "fsl,etsec-ptp"; + reg = <0x24E00 0xB0>; + interrupts = <12 0x8 13 0x8>; + interrupt-parent = < &ipic >; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <100>; + fsl,tmr-add = <0x999999A4>; + fsl,tmr-fiper1 = <0x3B9AC9F6>; + fsl,tmr-fiper2 = <0x00018696>; + fsl,max-adj = <659999998>; + }; diff --git a/Documentation/dontdiff b/Documentation/dontdiff index 470d3dba1a6..dfa6fc6e4b2 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -1,6 +1,8 @@ *.a *.aux *.bin +*.bz2 +*.cis *.cpio *.csp *.dsp @@ -8,6 +10,8 @@ *.elf *.eps *.fw +*.gcno +*.gcov *.gen.S *.gif *.grep @@ -19,14 +23,20 @@ *.ko *.log *.lst +*.lzma +*.lzo +*.mo *.moc *.mod.c *.o *.o.* +*.order *.orig *.out +*.patch *.pdf *.png +*.pot *.ps *.rej *.s @@ -39,16 +49,22 @@ *.tex *.ver *.xml +*.xz *_MODULES *_vga16.c *~ +\#*# *.9 -*.9.gz .* +.*.d .mm 53c700_d.h CVS ChangeSet +GPATH +GRTAGS +GSYMS +GTAGS Image Kerntypes Module.markers @@ -57,15 +73,14 @@ PENDING SCCS System.map* TAGS +aconf +af_names.h aic7*reg.h* aic7*reg_print.c* aic7*seq.h* aicasm aicdb.h* -altivec1.c -altivec2.c -altivec4.c -altivec8.c +altivec*.c asm-offsets.h asm_offsets.h autoconf.h* @@ -80,6 +95,7 @@ btfixupprep build bvmlinux bzImage* +capability_names.h capflags.c classlist.h* comp*.log @@ -88,7 +104,8 @@ conf config config-* config_data.h* -config_data.gz* +config.mak +config.mak.autogen conmakehash consolemap_deftbl.c* cpustr.h @@ -96,7 +113,9 @@ crc32table.h* cscope.* defkeymap.c devlist.h* +dnotify_test docproc +dslm elf2ecoff elfconfig.h* evergreen_reg_safe.h @@ -105,6 +124,7 @@ flask.h fore200e_mkfirm fore200e_pca_fw.c* gconf +gconf.glade.h gen-devlist gen_crc32table gen_init_cpio @@ -112,11 +132,12 @@ generated genheaders genksyms *_gray256.c +hpet_example +hugepage-mmap +hugepage-shm ihex2fw ikconfig.h* inat-tables.c -initramfs_data.cpio -initramfs_data.cpio.gz initramfs_list int16.c int1.c @@ -133,15 +154,19 @@ kxgettext lkc_defs.h lex.c lex.*.c +linux logo_*.c logo_*_clut224.c logo_*_mono.c lxdialog +mach mach-types mach-types.h machtypes.h map +map_hugetlb maui_boot.h +media mconf miboot* mk_elfconfig @@ -150,23 +175,29 @@ mkbugboot mkcpustr mkdep mkprep +mkregtable mktables mktree modpost modules.builtin modules.order modversions.h* +nconf ncscope.* offset.h offsets.h oui.c* +page-types parse.c parse.h patches* pca200e.bin pca200e_ecd.bin2 -piggy.gz +perf.data +perf.data.old +perf-archive piggyback +piggy.gzip piggy.S pnmtologo ppc_defs.h* @@ -177,10 +208,9 @@ r200_reg_safe.h r300_reg_safe.h r420_reg_safe.h r600_reg_safe.h -raid6altivec*.c -raid6int*.c -raid6tables.c +recordmcount relocs +rlim_names.h rn50_reg_safe.h rs600_reg_safe.h rv515_reg_safe.h @@ -194,6 +224,7 @@ split-include syscalltab.h tables.c tags +test_get_len tftpboot.img timeconst.h times.h* @@ -210,10 +241,13 @@ vdso32.so.dbg vdso64.lds vdso64.so.dbg version.h* +vmImage vmlinux vmlinux-* vmlinux.aout +vmlinux.bin.all vmlinux.lds +vmlinuz voffset.h vsyscall.lds vsyscall_32.lds diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 19132cadc18..95788ad2506 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -551,3 +551,26 @@ Why: These legacy callbacks should no longer be used as i2c-core offers Who: Jean Delvare <khali@linux-fr.org> ---------------------------- + +What: Support for UVCIOC_CTRL_ADD in the uvcvideo driver +When: 2.6.42 +Why: The information passed to the driver by this ioctl is now queried + dynamically from the device. +Who: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +---------------------------- + +What: Support for UVCIOC_CTRL_MAP_OLD in the uvcvideo driver +When: 2.6.42 +Why: Used only by applications compiled against older driver versions. + Superseded by UVCIOC_CTRL_MAP which supports V4L2 menu controls. +Who: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +---------------------------- + +What: Support for UVCIOC_CTRL_GET and UVCIOC_CTRL_SET in the uvcvideo driver +When: 2.6.42 +Why: Superseded by the UVCIOC_CTRL_QUERY ioctl. +Who: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +---------------------------- diff --git a/Documentation/filesystems/9p.txt b/Documentation/filesystems/9p.txt index b22abba78fe..13de64c7f0a 100644 --- a/Documentation/filesystems/9p.txt +++ b/Documentation/filesystems/9p.txt @@ -25,6 +25,8 @@ Other applications are described in the following papers: http://xcpu.org/papers/cellfs-talk.pdf * PROSE I/O: Using 9p to enable Application Partitions http://plan9.escet.urjc.es/iwp9/cready/PROSE_iwp9_2006.pdf + * VirtFS: A Virtualization Aware File System pass-through + http://goo.gl/3WPDg USAGE ===== @@ -130,31 +132,20 @@ OPTIONS RESOURCES ========= -Our current recommendation is to use Inferno (http://www.vitanuova.com/nferno/index.html) -as the 9p server. You can start a 9p server under Inferno by issuing the -following command: - ; styxlisten -A tcp!*!564 export '#U*' +Protocol specifications are maintained on github: +http://ericvh.github.com/9p-rfc/ -The -A specifies an unauthenticated export. The 564 is the port # (you may -have to choose a higher port number if running as a normal user). The '#U*' -specifies exporting the root of the Linux name space. You may specify a -subset of the namespace by extending the path: '#U*'/tmp would just export -/tmp. For more information, see the Inferno manual pages covering styxlisten -and export. +9p client and server implementations are listed on +http://9p.cat-v.org/implementations -A Linux version of the 9p server is now maintained under the npfs project -on sourceforge (http://sourceforge.net/projects/npfs). The currently -maintained version is the single-threaded version of the server (named spfs) -available from the same SVN repository. +A 9p2000.L server is being developed by LLNL and can be found +at http://code.google.com/p/diod/ There are user and developer mailing lists available through the v9fs project on sourceforge (http://sourceforge.net/projects/v9fs). -A stand-alone version of the module (which should build for any 2.6 kernel) -is available via (http://github.com/ericvh/9p-sac/tree/master) - -News and other information is maintained on SWiK (http://swik.net/v9fs) -and the Wiki (http://sf.net/apps/mediawiki/v9fs/index.php). +News and other information is maintained on a Wiki. +(http://sf.net/apps/mediawiki/v9fs/index.php). Bug reports may be issued through the kernel.org bugzilla (http://bugzilla.kernel.org) diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 60740e8ecb3..f4817802406 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -574,6 +574,12 @@ The contents of each smp_affinity file is the same by default: > cat /proc/irq/0/smp_affinity ffffffff +There is an alternate interface, smp_affinity_list which allows specifying +a cpu range instead of a bitmask: + + > cat /proc/irq/0/smp_affinity_list + 1024-1031 + The default_smp_affinity mask applies to all non-active IRQs, which are the IRQs which have not yet been allocated/activated, and hence which lack a /proc/irq/[0-9]* directory. @@ -583,12 +589,13 @@ reports itself as being attached. This hardware locality information does not include information about any possible driver locality preference. prof_cpu_mask specifies which CPUs are to be profiled by the system wide -profiler. Default value is ffffffff (all cpus). +profiler. Default value is ffffffff (all cpus if there are only 32 of them). The way IRQs are routed is handled by the IO-APIC, and it's Round Robin between all the CPUs which are allowed to handle it. As usual the kernel has more info than you and does a better job than you, so the defaults are the -best choice for almost everyone. +best choice for almost everyone. [Note this applies only to those IO-APIC's +that support "Round Robin" interrupt distribution.] There are three more important subdirectories in /proc: net, scsi, and sys. The general rule is that the contents, or even the existence of these diff --git a/Documentation/filesystems/ubifs.txt b/Documentation/filesystems/ubifs.txt index d7b13b01e98..8e4fab639d9 100644 --- a/Documentation/filesystems/ubifs.txt +++ b/Documentation/filesystems/ubifs.txt @@ -115,28 +115,8 @@ ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs Module Parameters for Debugging =============================== -When UBIFS has been compiled with debugging enabled, there are 3 module +When UBIFS has been compiled with debugging enabled, there are 2 module parameters that are available to control aspects of testing and debugging. -The parameters are unsigned integers where each bit controls an option. -The parameters are: - -debug_msgs Selects which debug messages to display, as follows: - - Message Type Flag value - - General messages 1 - Journal messages 2 - Mount messages 4 - Commit messages 8 - LEB search messages 16 - Budgeting messages 32 - Garbage collection messages 64 - Tree Node Cache (TNC) messages 128 - LEB properties (lprops) messages 256 - Input/output messages 512 - Log messages 1024 - Scan messages 2048 - Recovery messages 4096 debug_chks Selects extra checks that UBIFS can do while running: @@ -154,11 +134,9 @@ debug_tsts Selects a mode of testing, as follows: Test mode Flag value - Force in-the-gaps method 2 Failure mode for recovery testing 4 -For example, set debug_msgs to 5 to display General messages and Mount -messages. +For example, set debug_chks to 3 to enable general and TNC checks. References diff --git a/Documentation/hwmon/emc6w201 b/Documentation/hwmon/emc6w201 new file mode 100644 index 00000000000..32f355aaf56 --- /dev/null +++ b/Documentation/hwmon/emc6w201 @@ -0,0 +1,42 @@ +Kernel driver emc6w201 +====================== + +Supported chips: + * SMSC EMC6W201 + Prefix: 'emc6w201' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: Not public + +Author: Jean Delvare <khali@linux-fr.org> + + +Description +----------- + +From the datasheet: + +"The EMC6W201 is an environmental monitoring device with automatic fan +control capability and enhanced system acoustics for noise suppression. +This ACPI compliant device provides hardware monitoring for up to six +voltages (including its own VCC) and five external thermal sensors, +measures the speed of up to five fans, and controls the speed of +multiple DC fans using three Pulse Width Modulator (PWM) outputs. Note +that it is possible to control more than three fans by connecting two +fans to one PWM output. The EMC6W201 will be available in a 36-pin +QFN package." + +The device is functionally close to the EMC6D100 series, but is +register-incompatible. + +The driver currently only supports the monitoring of the voltages, +temperatures and fan speeds. Limits can be changed. Alarms are not +supported, and neither is fan speed control. + + +Known Systems With EMC6W201 +--------------------------- + +The EMC6W201 is a rare device, only found on a few systems, made in +2005 and 2006. Known systems with this device: +* Dell Precision 670 workstation +* Gigabyte 2CEWH mainboard diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg index df02245d141..84d2623810f 100644 --- a/Documentation/hwmon/f71882fg +++ b/Documentation/hwmon/f71882fg @@ -6,6 +6,10 @@ Supported chips: Prefix: 'f71808e' Addresses scanned: none, address read from Super I/O config space Datasheet: Not public + * Fintek F71808A + Prefix: 'f71808a' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Not public * Fintek F71858FG Prefix: 'f71858fg' Addresses scanned: none, address read from Super I/O config space diff --git a/Documentation/hwmon/fam15h_power b/Documentation/hwmon/fam15h_power new file mode 100644 index 00000000000..a92918e0bd6 --- /dev/null +++ b/Documentation/hwmon/fam15h_power @@ -0,0 +1,37 @@ +Kernel driver fam15h_power +========================== + +Supported chips: +* AMD Family 15h Processors + + Prefix: 'fam15h_power' + Addresses scanned: PCI space + Datasheets: + BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors + (not yet published) + +Author: Andreas Herrmann <andreas.herrmann3@amd.com> + +Description +----------- + +This driver permits reading of registers providing power information +of AMD Family 15h processors. + +For AMD Family 15h processors the following power values can be +calculated using different processor northbridge function registers: + +* BasePwrWatts: Specifies in watts the maximum amount of power + consumed by the processor for NB and logic external to the core. +* ProcessorPwrWatts: Specifies in watts the maximum amount of power + the processor can support. +* CurrPwrWatts: Specifies in watts the current amount of power being + consumed by the processor. + +This driver provides ProcessorPwrWatts and CurrPwrWatts: +* power1_crit (ProcessorPwrWatts) +* power1_input (CurrPwrWatts) + +On multi-node processors the calculated value is for the entire +package and not for a single node. Thus the driver creates sysfs +attributes only for internal node0 of a multi-node processor. diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp index d2b56a4fd1f..0393c89277c 100644 --- a/Documentation/hwmon/k10temp +++ b/Documentation/hwmon/k10temp @@ -11,6 +11,7 @@ Supported chips: Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra) * AMD Family 12h processors: "Llano" * AMD Family 14h processors: "Brazos" (C/E/G-Series) +* AMD Family 15h processors: "Bulldozer" Prefix: 'k10temp' Addresses scanned: PCI space @@ -40,7 +41,7 @@ Description ----------- This driver permits reading of the internal temperature sensor of AMD -Family 10h/11h/12h/14h processors. +Family 10h/11h/12h/14h/15h processors. All these processors have a sensor, but on those for Socket F or AM2+, the sensor may return inconsistent values (erratum 319). The driver diff --git a/Documentation/hwmon/max6650 b/Documentation/hwmon/max6650 index c565650fcfc..58d9644a2bd 100644 --- a/Documentation/hwmon/max6650 +++ b/Documentation/hwmon/max6650 @@ -2,9 +2,13 @@ Kernel driver max6650 ===================== Supported chips: - * Maxim 6650 / 6651 + * Maxim MAX6650 Prefix: 'max6650' - Addresses scanned: I2C 0x1b, 0x1f, 0x48, 0x4b + Addresses scanned: none + Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf + * Maxim MAX6651 + Prefix: 'max6651' + Addresses scanned: none Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf Authors: @@ -15,10 +19,10 @@ Authors: Description ----------- -This driver implements support for the Maxim 6650/6651 +This driver implements support for the Maxim MAX6650 and MAX6651. -The 2 devices are very similar, but the Maxim 6550 has a reduced feature -set, e.g. only one fan-input, instead of 4 for the 6651. +The 2 devices are very similar, but the MAX6550 has a reduced feature +set, e.g. only one fan-input, instead of 4 for the MAX6651. The driver is not able to distinguish between the 2 devices. @@ -36,6 +40,13 @@ fan1_div rw sets the speed range the inputs can handle. Legal values are 1, 2, 4, and 8. Use lower values for faster fans. +Usage notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices for +details. + Module parameters ----------------- diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index 6df69765ccb..2871fd50034 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -19,6 +19,7 @@ Supported adapters: * Intel 6 Series (PCH) * Intel Patsburg (PCH) * Intel DH89xxCC (PCH) + * Intel Panther Point (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index 5ebf5af1d71..5aa53374ea2 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -38,7 +38,7 @@ static struct i2c_driver foo_driver = { .name = "foo", }, - .id_table = foo_ids, + .id_table = foo_idtable, .probe = foo_probe, .remove = foo_remove, /* if device autodetection is needed: */ diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt index 56941ae1f5d..db798af5ef9 100644 --- a/Documentation/input/elantech.txt +++ b/Documentation/input/elantech.txt @@ -34,7 +34,8 @@ Contents Currently the Linux Elantech touchpad driver is aware of two different hardware versions unimaginatively called version 1 and version 2. Version 1 is found in "older" laptops and uses 4 bytes per packet. Version 2 seems to -be introduced with the EeePC and uses 6 bytes per packet. +be introduced with the EeePC and uses 6 bytes per packet, and provides +additional features such as position of two fingers, and width of the touch. The driver tries to support both hardware versions and should be compatible with the Xorg Synaptics touchpad driver and its graphical configuration @@ -94,18 +95,44 @@ Currently the Linux Elantech touchpad driver provides two extra knobs under can check these bits and reject any packet that appears corrupted. Using this knob you can bypass that check. - It is not known yet whether hardware version 2 provides the same parity - bits. Hence checking is disabled by default. Currently even turning it on - will do nothing. - + Hardware version 2 does not provide the same parity bits. Only some basic + data consistency checking can be done. For now checking is disabled by + default. Currently even turning it on will do nothing. ///////////////////////////////////////////////////////////////////////////// +3. Differentiating hardware versions + ================================= + +To detect the hardware version, read the version number as param[0].param[1].param[2] + + 4 bytes version: (after the arrow is the name given in the Dell-provided driver) + 02.00.22 => EF013 + 02.06.00 => EF019 +In the wild, there appear to be more versions, such as 00.01.64, 01.00.21, +02.00.00, 02.00.04, 02.00.06. + + 6 bytes: + 02.00.30 => EF113 + 02.08.00 => EF023 + 02.08.XX => EF123 + 02.0B.00 => EF215 + 04.01.XX => Scroll_EF051 + 04.02.XX => EF051 +In the wild, there appear to be more versions, such as 04.03.01, 04.04.11. There +appears to be almost no difference, except for EF113, which does not report +pressure/width and has different data consistency checks. + +Probably all the versions with param[0] <= 01 can be considered as +4 bytes/firmware 1. The versions < 02.08.00, with the exception of 02.00.30, as +4 bytes/firmware 2. Everything >= 02.08.00 can be considered as 6 bytes. + +///////////////////////////////////////////////////////////////////////////// -3. Hardware version 1 +4. Hardware version 1 ================== -3.1 Registers +4.1 Registers ~~~~~~~~~ By echoing a hexadecimal value to a register it contents can be altered. @@ -168,7 +195,7 @@ For example: smart edge activation area width? -3.2 Native relative mode 4 byte packet format +4.2 Native relative mode 4 byte packet format ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ byte 0: @@ -226,9 +253,13 @@ byte 3: positive = down -3.3 Native absolute mode 4 byte packet format +4.3 Native absolute mode 4 byte packet format ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +EF013 and EF019 have a special behaviour (due to a bug in the firmware?), and +when 1 finger is touching, the first 2 position reports must be discarded. +This counting is reset whenever a different number of fingers is reported. + byte 0: firmware version 1.x: @@ -279,11 +310,11 @@ byte 3: ///////////////////////////////////////////////////////////////////////////// -4. Hardware version 2 +5. Hardware version 2 ================== -4.1 Registers +5.1 Registers ~~~~~~~~~ By echoing a hexadecimal value to a register it contents can be altered. @@ -316,16 +347,41 @@ For example: 0x7f = never i.e. tap again to release) -4.2 Native absolute mode 6 byte packet format +5.2 Native absolute mode 6 byte packet format ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -4.2.1 One finger touch +5.2.1 Parity checking and packet re-synchronization +There is no parity checking, however some consistency checks can be performed. + +For instance for EF113: + SA1= packet[0]; + A1 = packet[1]; + B1 = packet[2]; + SB1= packet[3]; + C1 = packet[4]; + D1 = packet[5]; + if( (((SA1 & 0x3C) != 0x3C) && ((SA1 & 0xC0) != 0x80)) || // check Byte 1 + (((SA1 & 0x0C) != 0x0C) && ((SA1 & 0xC0) == 0x80)) || // check Byte 1 (one finger pressed) + (((SA1 & 0xC0) != 0x80) && (( A1 & 0xF0) != 0x00)) || // check Byte 2 + (((SB1 & 0x3E) != 0x38) && ((SA1 & 0xC0) != 0x80)) || // check Byte 4 + (((SB1 & 0x0E) != 0x08) && ((SA1 & 0xC0) == 0x80)) || // check Byte 4 (one finger pressed) + (((SA1 & 0xC0) != 0x80) && (( C1 & 0xF0) != 0x00)) ) // check Byte 5 + // error detected + +For all the other ones, there are just a few constant bits: + if( ((packet[0] & 0x0C) != 0x04) || + ((packet[3] & 0x0f) != 0x02) ) + // error detected + + +In case an error is detected, all the packets are shifted by one (and packet[0] is discarded). + +5.2.1 One/Three finger touch ~~~~~~~~~~~~~~~~ byte 0: bit 7 6 5 4 3 2 1 0 - n1 n0 . . . . R L + n1 n0 w3 w2 . . R L L, R = 1 when Left, Right mouse button pressed n1..n0 = numbers of fingers on touchpad @@ -333,24 +389,40 @@ byte 0: byte 1: bit 7 6 5 4 3 2 1 0 - . . . . . x10 x9 x8 + p7 p6 p5 p4 . x10 x9 x8 byte 2: bit 7 6 5 4 3 2 1 0 - x7 x6 x5 x4 x4 x2 x1 x0 + x7 x6 x5 x4 x3 x2 x1 x0 x10..x0 = absolute x value (horizontal) byte 3: bit 7 6 5 4 3 2 1 0 - . . . . . . . . + n4 vf w1 w0 . . . b2 + + n4 = set if more than 3 fingers (only in 3 fingers mode) + vf = a kind of flag ? (only on EF123, 0 when finger is over one + of the buttons, 1 otherwise) + w3..w0 = width of the finger touch (not EF113) + b2 (on EF113 only, 0 otherwise), b2.R.L indicates one button pressed: + 0 = none + 1 = Left + 2 = Right + 3 = Middle (Left and Right) + 4 = Forward + 5 = Back + 6 = Another one + 7 = Another one byte 4: bit 7 6 5 4 3 2 1 0 - . . . . . . y9 y8 + p3 p1 p2 p0 . . y9 y8 + + p7..p0 = pressure (not EF113) byte 5: @@ -363,6 +435,11 @@ byte 5: 4.2.2 Two finger touch ~~~~~~~~~~~~~~~~ +Note that the two pairs of coordinates are not exactly the coordinates of the +two fingers, but only the pair of the lower-left and upper-right coordinates. +So the actual fingers might be situated on the other diagonal of the square +defined by these two points. + byte 0: bit 7 6 5 4 3 2 1 0 @@ -376,14 +453,14 @@ byte 1: bit 7 6 5 4 3 2 1 0 ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 - ax8..ax0 = first finger absolute x value + ax8..ax0 = lower-left finger absolute x value byte 2: bit 7 6 5 4 3 2 1 0 ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 - ay8..ay0 = first finger absolute y value + ay8..ay0 = lower-left finger absolute y value byte 3: @@ -395,11 +472,11 @@ byte 4: bit 7 6 5 4 3 2 1 0 bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 - bx8..bx0 = second finger absolute x value + bx8..bx0 = upper-right finger absolute x value byte 5: bit 7 6 5 4 3 2 1 0 by7 by8 by5 by4 by3 by2 by1 by0 - by8..by0 = second finger absolute y value + by8..by0 = upper-right finger absolute y value diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/rotary-encoder.txt index 943e8f6f2b1..92e68bce13a 100644 --- a/Documentation/input/rotary-encoder.txt +++ b/Documentation/input/rotary-encoder.txt @@ -9,6 +9,9 @@ peripherals with two wires. The outputs are phase-shifted by 90 degrees and by triggering on falling and rising edges, the turn direction can be determined. +Some encoders have both outputs low in stable states, whereas others also have +a stable state with both outputs high (half-period mode). + The phase diagram of these two outputs look like this: _____ _____ _____ @@ -26,6 +29,8 @@ The phase diagram of these two outputs look like this: |<-------->| one step + |<-->| + one step (half-period mode) For more information, please see http://en.wikipedia.org/wiki/Rotary_encoder @@ -34,6 +39,13 @@ For more information, please see 1. Events / state machine ------------------------- +In half-period mode, state a) and c) above are used to determine the +rotational direction based on the last stable state. Events are reported in +states b) and d) given that the new stable state is different from the last +(i.e. the rotation was not reversed half-way). + +Otherwise, the following apply: + a) Rising edge on channel A, channel B in low state This state is used to recognize a clockwise turn @@ -96,6 +108,7 @@ static struct rotary_encoder_platform_data my_rotary_encoder_info = { .gpio_b = GPIO_ROTARY_B, .inverted_a = 0, .inverted_b = 0, + .half_period = false, }; static struct platform_device rotary_encoder_device = { diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index a0a5d82b6b0..3a46e360496 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -166,7 +166,6 @@ Code Seq#(hex) Include File Comments 'T' all arch/x86/include/asm/ioctls.h conflict! 'T' C0-DF linux/if_tun.h conflict! 'U' all sound/asound.h conflict! -'U' 00-0F drivers/media/video/uvc/uvcvideo.h conflict! 'U' 00-CF linux/uinput.h conflict! 'U' 00-EF linux/usbdevice_fs.h 'U' C0-CF drivers/bluetooth/hci_uart.h @@ -259,6 +258,7 @@ Code Seq#(hex) Include File Comments 't' 80-8F linux/isdn_ppp.h 't' 90 linux/toshiba.h 'u' 00-1F linux/smb_fs.h gone +'u' 20-3F linux/uvcvideo.h USB video class host driver 'v' 00-1F linux/ext2_fs.h conflict! 'v' 00-1F linux/fs.h conflict! 'v' 00-0F linux/sonypi.h conflict! @@ -304,6 +304,7 @@ Code Seq#(hex) Include File Comments 0xB0 all RATIO devices in development: <mailto:vgo@ratio.de> 0xB1 00-1F PPPoX <mailto:mostrows@styx.uwaterloo.ca> +0xB3 00 linux/mmc/ioctl.h 0xC0 00-0F linux/usb/iowarrior.h 0xCB 00-1F CBM serial IEC bus in development: <mailto:michael.klein@puffin.lb.shuttle.de> diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt index 7c2a89ba674..68e32bb6bd8 100644 --- a/Documentation/kbuild/kbuild.txt +++ b/Documentation/kbuild/kbuild.txt @@ -201,3 +201,16 @@ KBUILD_ENABLE_EXTRA_GCC_CHECKS -------------------------------------------------- If enabled over the make command line with "W=1", it turns on additional gcc -W... options for more extensive build-time checking. + +KBUILD_BUILD_TIMESTAMP +-------------------------------------------------- +Setting this to a date string overrides the timestamp used in the +UTS_VERSION definition (uname -v in the running kernel). The value has to +be a string that can be passed to date -d. The default value +is the output of the date command at one point during build. + +KBUILD_BUILD_USER, KBUILD_BUILD_HOST +-------------------------------------------------- +These two variables allow to override the user@host string displayed during +boot and in /proc/version. The default value is the output of the commands +whoami and host, respectively. diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt index b507d61fd41..44e2649fbb2 100644 --- a/Documentation/kbuild/kconfig-language.txt +++ b/Documentation/kbuild/kconfig-language.txt @@ -113,6 +113,13 @@ applicable everywhere (see syntax). That will limit the usefulness but on the other hand avoid the illegal configurations all over. +- limiting menu display: "visible if" <expr> + This attribute is only applicable to menu blocks, if the condition is + false, the menu block is not displayed to the user (the symbols + contained there can still be selected by other symbols, though). It is + similar to a conditional "prompt" attribude for individual menu + entries. Default value of "visible" is true. + - numerical ranges: "range" <symbol> <symbol> ["if" <expr>] This allows to limit the range of possible input values for int and hex symbols. The user can only input a value which is larger than @@ -303,7 +310,8 @@ menu: "endmenu" This defines a menu block, see "Menu structure" above for more -information. The only possible options are dependencies. +information. The only possible options are dependencies and "visible" +attributes. if: @@ -381,3 +389,25 @@ config FOO limits FOO to module (=m) or disabled (=n). +Kconfig symbol existence +~~~~~~~~~~~~~~~~~~~~~~~~ +The following two methods produce the same kconfig symbol dependencies +but differ greatly in kconfig symbol existence (production) in the +generated config file. + +case 1: + +config FOO + tristate "about foo" + depends on BAR + +vs. case 2: + +if BAR +config FOO + tristate "about foo" +endif + +In case 1, the symbol FOO will always exist in the config file (given +no other dependencies). In case 2, the symbol FOO will only exist in +the config file if BAR is enabled. diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt index cca46b1a0f6..c313d71324b 100644 --- a/Documentation/kbuild/kconfig.txt +++ b/Documentation/kbuild/kconfig.txt @@ -48,11 +48,6 @@ KCONFIG_OVERWRITECONFIG If you set KCONFIG_OVERWRITECONFIG in the environment, Kconfig will not break symlinks when .config is a symlink to somewhere else. -KCONFIG_NOTIMESTAMP --------------------------------------------------- -If this environment variable exists and is non-null, the timestamp line -in generated .config files is omitted. - ______________________________________________________________________ Environment variables for '{allyes/allmod/allno/rand}config' diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index 5d145bb443c..47435e56c5d 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -40,11 +40,13 @@ This document describes the Linux kernel Makefiles. --- 6.6 Commands useful for building a boot image --- 6.7 Custom kbuild commands --- 6.8 Preprocessing linker scripts + --- 6.9 Generic header files === 7 Kbuild syntax for exported headers --- 7.1 header-y --- 7.2 objhdr-y --- 7.3 destination-y + --- 7.4 generic-y === 8 Kbuild Variables === 9 Makefile language @@ -499,6 +501,18 @@ more details, with real examples. gcc >= 3.00. For gcc < 3.00, -malign-functions=4 is used. Note: cc-option-align uses KBUILD_CFLAGS for $(CC) options + cc-disable-warning + cc-disable-warning checks if gcc supports a given warning and returns + the commandline switch to disable it. This special function is needed, + because gcc 4.4 and later accept any unknown -Wno-* option and only + warn about it if there is another warning in the source file. + + Example: + KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable) + + In the above example, -Wno-unused-but-set-variable will be added to + KBUILD_CFLAGS only if gcc really accepts it. + cc-version cc-version returns a numerical version of the $(CC) compiler version. The format is <major><minor> where both are two digits. So for example @@ -955,6 +969,11 @@ When kbuild executes, the following steps are followed (roughly): used when linking modules. This is often a linker script. From commandline LDFLAGS_MODULE shall be used (see kbuild.txt). + KBUILD_ARFLAGS Options for $(AR) when creating archives + + $(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic + mode) if this option is supported by $(AR). + --- 6.2 Add prerequisites to archprepare: The archprepare: rule is used to list prerequisites that need to be @@ -1209,6 +1228,14 @@ When kbuild executes, the following steps are followed (roughly): The kbuild infrastructure for *lds file are used in several architecture-specific files. +--- 6.9 Generic header files + + The directory include/asm-generic contains the header files + that may be shared between individual architectures. + The recommended approach how to use a generic header file is + to list the file in the Kbuild file. + See "7.4 generic-y" for further info on syntax etc. + === 7 Kbuild syntax for exported headers The kernel include a set of headers that is exported to userspace. @@ -1265,6 +1292,32 @@ See subsequent chapter for the syntax of the Kbuild file. In the example above all exported headers in the Kbuild file will be located in the directory "include/linux" when exported. + --- 7.4 generic-y + + If an architecture uses a verbatim copy of a header from + include/asm-generic then this is listed in the file + arch/$(ARCH)/include/asm/Kbuild like this: + + Example: + #arch/x86/include/asm/Kbuild + generic-y += termios.h + generic-y += rtc.h + + During the prepare phase of the build a wrapper include + file is generated in the directory: + + arch/$(ARCH)/include/generated/asm + + When a header is exported where the architecture uses + the generic header a similar wrapper is generated as part + of the set of exported headers in the directory: + + usr/include/asm + + The generated wrapper will in both cases look like the following: + + Example: termios.h + #include <asm-generic/termios.h> === 8 Kbuild Variables diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c603ef7b056..5438a2d7907 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1777,9 +1777,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. nosoftlockup [KNL] Disable the soft-lockup detector. - noswapaccount [KNL] Disable accounting of swap in memory resource - controller. (See Documentation/cgroups/memory.txt) - nosync [HW,M68K] Disables sync negotiation for all devices. notsc [BUGS=X86-32] Disable Time Stamp Counter @@ -2585,6 +2582,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. bytes of sense data); c = FIX_CAPACITY (decrease the reported device capacity by one sector); + d = NO_READ_DISC_INFO (don't use + READ_DISC_INFO command); + e = NO_READ_CAPACITY_16 (don't use + READ_CAPACITY_16 command); h = CAPACITY_HEURISTICS (decrease the reported device capacity by one sector if the number is odd); diff --git a/Documentation/lockstat.txt b/Documentation/lockstat.txt index 65f4c795015..9c0a80d17a2 100644 --- a/Documentation/lockstat.txt +++ b/Documentation/lockstat.txt @@ -136,7 +136,7 @@ View the top contending locks: dcache_lock: 1037 1161 0.38 45.32 774.51 6611 243371 0.15 306.48 77387.24 &inode->i_mutex: 161 286 18446744073709 62882.54 1244614.55 3653 20598 18446744073709 62318.60 1693822.74 &zone->lru_lock: 94 94 0.53 7.33 92.10 4366 32690 0.29 59.81 16350.06 - &inode->i_data.i_mmap_lock: 79 79 0.40 3.77 53.03 11779 87755 0.28 116.93 29898.44 + &inode->i_data.i_mmap_mutex: 79 79 0.40 3.77 53.03 11779 87755 0.28 116.93 29898.44 &q->__queue_lock: 48 50 0.52 31.62 86.31 774 13131 0.17 113.08 12277.52 &rq->rq_lock_key: 43 47 0.74 68.50 170.63 3706 33929 0.22 107.99 17460.62 &rq->rq_lock_key#2: 39 46 0.75 6.68 49.03 2979 32292 0.17 125.17 17137.63 diff --git a/Documentation/mmc/00-INDEX b/Documentation/mmc/00-INDEX index fca586f5b85..93dd7a71407 100644 --- a/Documentation/mmc/00-INDEX +++ b/Documentation/mmc/00-INDEX @@ -2,3 +2,5 @@ - this file mmc-dev-attrs.txt - info on SD and MMC device attributes +mmc-dev-parts.txt + - info on SD and MMC device partitions diff --git a/Documentation/mmc/mmc-dev-attrs.txt b/Documentation/mmc/mmc-dev-attrs.txt index ff2bd685bce..8898a95b41e 100644 --- a/Documentation/mmc/mmc-dev-attrs.txt +++ b/Documentation/mmc/mmc-dev-attrs.txt @@ -1,3 +1,13 @@ +SD and MMC Block Device Attributes +================================== + +These attributes are defined for the block devices associated with the +SD or MMC device. + +The following attributes are read/write. + + force_ro Enforce read-only access even if write protect switch is off. + SD and MMC Device Attributes ============================ diff --git a/Documentation/mmc/mmc-dev-parts.txt b/Documentation/mmc/mmc-dev-parts.txt new file mode 100644 index 00000000000..2db28b8e662 --- /dev/null +++ b/Documentation/mmc/mmc-dev-parts.txt @@ -0,0 +1,27 @@ +SD and MMC Device Partitions +============================ + +Device partitions are additional logical block devices present on the +SD/MMC device. + +As of this writing, MMC boot partitions as supported and exposed as +/dev/mmcblkXboot0 and /dev/mmcblkXboot1, where X is the index of the +parent /dev/mmcblkX. + +MMC Boot Partitions +=================== + +Read and write access is provided to the two MMC boot partitions. Due to +the sensitive nature of the boot partition contents, which often store +a bootloader or bootloader configuration tables crucial to booting the +platform, write access is disabled by default to reduce the chance of +accidental bricking. + +To enable write access to /dev/mmcblkXbootY, disable the forced read-only +access with: + +echo 0 > /sys/block/mmcblkXbootY/force_ro + +To re-enable read-only access: + +echo 1 > /sys/block/mmcblkXbootY/force_ro diff --git a/Documentation/pti/pti_intel_mid.txt b/Documentation/pti/pti_intel_mid.txt new file mode 100644 index 00000000000..e7a5b6d1f7a --- /dev/null +++ b/Documentation/pti/pti_intel_mid.txt @@ -0,0 +1,99 @@ +The Intel MID PTI project is HW implemented in Intel Atom +system-on-a-chip designs based on the Parallel Trace +Interface for MIPI P1149.7 cJTAG standard. The kernel solution +for this platform involves the following files: + +./include/linux/pti.h +./drivers/.../n_tracesink.h +./drivers/.../n_tracerouter.c +./drivers/.../n_tracesink.c +./drivers/.../pti.c + +pti.c is the driver that enables various debugging features +popular on platforms from certain mobile manufacturers. +n_tracerouter.c and n_tracesink.c allow extra system information to +be collected and routed to the pti driver, such as trace +debugging data from a modem. Although n_tracerouter +and n_tracesink are a part of the complete PTI solution, +these two line disciplines can work separately from +pti.c and route any data stream from one /dev/tty node +to another /dev/tty node via kernel-space. This provides +a stable, reliable connection that will not break unless +the user-space application shuts down (plus avoids +kernel->user->kernel context switch overheads of routing +data). + +An example debugging usage for this driver system: + *Hook /dev/ttyPTI0 to syslogd. Opening this port will also start + a console device to further capture debugging messages to PTI. + *Hook /dev/ttyPTI1 to modem debugging data to write to PTI HW. + This is where n_tracerouter and n_tracesink are used. + *Hook /dev/pti to a user-level debugging application for writing + to PTI HW. + *Use mipi_* Kernel Driver API in other device drivers for + debugging to PTI by first requesting a PTI write address via + mipi_request_masterchannel(1). + +Below is example pseudo-code on how a 'privileged' application +can hook up n_tracerouter and n_tracesink to any tty on +a system. 'Privileged' means the application has enough +privileges to successfully manipulate the ldisc drivers +but is not just blindly executing as 'root'. Keep in mind +the use of ioctl(,TIOCSETD,) is not specific to the n_tracerouter +and n_tracesink line discpline drivers but is a generic +operation for a program to use a line discpline driver +on a tty port other than the default n_tty. + +/////////// To hook up n_tracerouter and n_tracesink ///////// + +// Note that n_tracerouter depends on n_tracesink. +#include <errno.h> +#define ONE_TTY "/dev/ttyOne" +#define TWO_TTY "/dev/ttyTwo" + +// needed global to hand onto ldisc connection +static int g_fd_source = -1; +static int g_fd_sink = -1; + +// these two vars used to grab LDISC values from loaded ldisc drivers +// in OS. Look at /proc/tty/ldiscs to get the right numbers from +// the ldiscs loaded in the system. +int source_ldisc_num, sink_ldisc_num = -1; +int retval; + +g_fd_source = open(ONE_TTY, O_RDWR); // must be R/W +g_fd_sink = open(TWO_TTY, O_RDWR); // must be R/W + +if (g_fd_source <= 0) || (g_fd_sink <= 0) { + // doubt you'll want to use these exact error lines of code + printf("Error on open(). errno: %d\n",errno); + return errno; +} + +retval = ioctl(g_fd_sink, TIOCSETD, &sink_ldisc_num); +if (retval < 0) { + printf("Error on ioctl(). errno: %d\n", errno); + return errno; +} + +retval = ioctl(g_fd_source, TIOCSETD, &source_ldisc_num); +if (retval < 0) { + printf("Error on ioctl(). errno: %d\n", errno); + return errno; +} + +/////////// To disconnect n_tracerouter and n_tracesink //////// + +// First make sure data through the ldiscs has stopped. + +// Second, disconnect ldiscs. This provides a +// little cleaner shutdown on tty stack. +sink_ldisc_num = 0; +source_ldisc_num = 0; +ioctl(g_fd_uart, TIOCSETD, &sink_ldisc_num); +ioctl(g_fd_gadget, TIOCSETD, &source_ldisc_num); + +// Three, program closes connection, and cleanup: +close(g_fd_uart); +close(g_fd_gadget); +g_fd_uart = g_fd_gadget = NULL; diff --git a/Documentation/ptp/ptp.txt b/Documentation/ptp/ptp.txt new file mode 100644 index 00000000000..ae8fef86b83 --- /dev/null +++ b/Documentation/ptp/ptp.txt @@ -0,0 +1,89 @@ + +* PTP hardware clock infrastructure for Linux + + This patch set introduces support for IEEE 1588 PTP clocks in + Linux. Together with the SO_TIMESTAMPING socket options, this + presents a standardized method for developing PTP user space + programs, synchronizing Linux with external clocks, and using the + ancillary features of PTP hardware clocks. + + A new class driver exports a kernel interface for specific clock + drivers and a user space interface. The infrastructure supports a + complete set of PTP hardware clock functionality. + + + Basic clock operations + - Set time + - Get time + - Shift the clock by a given offset atomically + - Adjust clock frequency + + + Ancillary clock features + - One short or periodic alarms, with signal delivery to user program + - Time stamp external events + - Period output signals configurable from user space + - Synchronization of the Linux system time via the PPS subsystem + +** PTP hardware clock kernel API + + A PTP clock driver registers itself with the class driver. The + class driver handles all of the dealings with user space. The + author of a clock driver need only implement the details of + programming the clock hardware. The clock driver notifies the class + driver of asynchronous events (alarms and external time stamps) via + a simple message passing interface. + + The class driver supports multiple PTP clock drivers. In normal use + cases, only one PTP clock is needed. However, for testing and + development, it can be useful to have more than one clock in a + single system, in order to allow performance comparisons. + +** PTP hardware clock user space API + + The class driver also creates a character device for each + registered clock. User space can use an open file descriptor from + the character device as a POSIX clock id and may call + clock_gettime, clock_settime, and clock_adjtime. These calls + implement the basic clock operations. + + User space programs may control the clock using standardized + ioctls. A program may query, enable, configure, and disable the + ancillary clock features. User space can receive time stamped + events via blocking read() and poll(). One shot and periodic + signals may be configured via the POSIX timer_settime() system + call. + +** Writing clock drivers + + Clock drivers include include/linux/ptp_clock_kernel.h and register + themselves by presenting a 'struct ptp_clock_info' to the + registration method. Clock drivers must implement all of the + functions in the interface. If a clock does not offer a particular + ancillary feature, then the driver should just return -EOPNOTSUPP + from those functions. + + Drivers must ensure that all of the methods in interface are + reentrant. Since most hardware implementations treat the time value + as a 64 bit integer accessed as two 32 bit registers, drivers + should use spin_lock_irqsave/spin_unlock_irqrestore to protect + against concurrent access. This locking cannot be accomplished in + class driver, since the lock may also be needed by the clock + driver's interrupt service routine. + +** Supported hardware + + + Freescale eTSEC gianfar + - 2 Time stamp external triggers, programmable polarity (opt. interrupt) + - 2 Alarm registers (optional interrupt) + - 3 Periodic signals (optional interrupt) + + + National DP83640 + - 6 GPIOs programmable as inputs or outputs + - 6 GPIOs with dedicated functions (LED/JTAG/clock) can also be + used as general inputs or outputs + - GPIO inputs can time stamp external triggers + - GPIO outputs can produce periodic signals + - 1 interrupt pin + + + Intel IXP465 + - Auxiliary Slave/Master Mode Snapshot (optional interrupt) + - Target Time (optional interrupt) diff --git a/Documentation/ptp/testptp.c b/Documentation/ptp/testptp.c new file mode 100644 index 00000000000..f59ded06610 --- /dev/null +++ b/Documentation/ptp/testptp.c @@ -0,0 +1,381 @@ +/* + * PTP 1588 clock support - User space test program + * + * Copyright (C) 2010 OMICRON electronics GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <errno.h> +#include <fcntl.h> +#include <math.h> +#include <signal.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/ioctl.h> +#include <sys/mman.h> +#include <sys/stat.h> +#include <sys/time.h> +#include <sys/timex.h> +#include <sys/types.h> +#include <time.h> +#include <unistd.h> + +#include <linux/ptp_clock.h> + +#define DEVICE "/dev/ptp0" + +#ifndef ADJ_SETOFFSET +#define ADJ_SETOFFSET 0x0100 +#endif + +#ifndef CLOCK_INVALID +#define CLOCK_INVALID -1 +#endif + +/* When glibc offers the syscall, this will go away. */ +#include <sys/syscall.h> +static int clock_adjtime(clockid_t id, struct timex *tx) +{ + return syscall(__NR_clock_adjtime, id, tx); +} + +static clockid_t get_clockid(int fd) +{ +#define CLOCKFD 3 +#define FD_TO_CLOCKID(fd) ((~(clockid_t) (fd) << 3) | CLOCKFD) + + return FD_TO_CLOCKID(fd); +} + +static void handle_alarm(int s) +{ + printf("received signal %d\n", s); +} + +static int install_handler(int signum, void (*handler)(int)) +{ + struct sigaction action; + sigset_t mask; + + /* Unblock the signal. */ + sigemptyset(&mask); + sigaddset(&mask, signum); + sigprocmask(SIG_UNBLOCK, &mask, NULL); + + /* Install the signal handler. */ + action.sa_handler = handler; + action.sa_flags = 0; + sigemptyset(&action.sa_mask); + sigaction(signum, &action, NULL); + + return 0; +} + +static long ppb_to_scaled_ppm(int ppb) +{ + /* + * The 'freq' field in the 'struct timex' is in parts per + * million, but with a 16 bit binary fractional field. + * Instead of calculating either one of + * + * scaled_ppm = (ppb / 1000) << 16 [1] + * scaled_ppm = (ppb << 16) / 1000 [2] + * + * we simply use double precision math, in order to avoid the + * truncation in [1] and the possible overflow in [2]. + */ + return (long) (ppb * 65.536); +} + +static void usage(char *progname) +{ + fprintf(stderr, + "usage: %s [options]\n" + " -a val request a one-shot alarm after 'val' seconds\n" + " -A val request a periodic alarm every 'val' seconds\n" + " -c query the ptp clock's capabilities\n" + " -d name device to open\n" + " -e val read 'val' external time stamp events\n" + " -f val adjust the ptp clock frequency by 'val' ppb\n" + " -g get the ptp clock time\n" + " -h prints this message\n" + " -p val enable output with a period of 'val' nanoseconds\n" + " -P val enable or disable (val=1|0) the system clock PPS\n" + " -s set the ptp clock time from the system time\n" + " -S set the system time from the ptp clock time\n" + " -t val shift the ptp clock time by 'val' seconds\n", + progname); +} + +int main(int argc, char *argv[]) +{ + struct ptp_clock_caps caps; + struct ptp_extts_event event; + struct ptp_extts_request extts_request; + struct ptp_perout_request perout_request; + struct timespec ts; + struct timex tx; + + static timer_t timerid; + struct itimerspec timeout; + struct sigevent sigevent; + + char *progname; + int c, cnt, fd; + + char *device = DEVICE; + clockid_t clkid; + int adjfreq = 0x7fffffff; + int adjtime = 0; + int capabilities = 0; + int extts = 0; + int gettime = 0; + int oneshot = 0; + int periodic = 0; + int perout = -1; + int pps = -1; + int settime = 0; + + progname = strrchr(argv[0], '/'); + progname = progname ? 1+progname : argv[0]; + while (EOF != (c = getopt(argc, argv, "a:A:cd:e:f:ghp:P:sSt:v"))) { + switch (c) { + case 'a': + oneshot = atoi(optarg); + break; + case 'A': + periodic = atoi(optarg); + break; + case 'c': + capabilities = 1; + break; + case 'd': + device = optarg; + break; + case 'e': + extts = atoi(optarg); + break; + case 'f': + adjfreq = atoi(optarg); + break; + case 'g': + gettime = 1; + break; + case 'p': + perout = atoi(optarg); + break; + case 'P': + pps = atoi(optarg); + break; + case 's': + settime = 1; + break; + case 'S': + settime = 2; + break; + case 't': + adjtime = atoi(optarg); + break; + case 'h': + usage(progname); + return 0; + case '?': + default: + usage(progname); + return -1; + } + } + + fd = open(device, O_RDWR); + if (fd < 0) { + fprintf(stderr, "opening %s: %s\n", device, strerror(errno)); + return -1; + } + + clkid = get_clockid(fd); + if (CLOCK_INVALID == clkid) { + fprintf(stderr, "failed to read clock id\n"); + return -1; + } + + if (capabilities) { + if (ioctl(fd, PTP_CLOCK_GETCAPS, &caps)) { + perror("PTP_CLOCK_GETCAPS"); + } else { + printf("capabilities:\n" + " %d maximum frequency adjustment (ppb)\n" + " %d programmable alarms\n" + " %d external time stamp channels\n" + " %d programmable periodic signals\n" + " %d pulse per second\n", + caps.max_adj, + caps.n_alarm, + caps.n_ext_ts, + caps.n_per_out, + caps.pps); + } + } + + if (0x7fffffff != adjfreq) { + memset(&tx, 0, sizeof(tx)); + tx.modes = ADJ_FREQUENCY; + tx.freq = ppb_to_scaled_ppm(adjfreq); + if (clock_adjtime(clkid, &tx)) { + perror("clock_adjtime"); + } else { + puts("frequency adjustment okay"); + } + } + + if (adjtime) { + memset(&tx, 0, sizeof(tx)); + tx.modes = ADJ_SETOFFSET; + tx.time.tv_sec = adjtime; + tx.time.tv_usec = 0; + if (clock_adjtime(clkid, &tx) < 0) { + perror("clock_adjtime"); + } else { + puts("time shift okay"); + } + } + + if (gettime) { + if (clock_gettime(clkid, &ts)) { + perror("clock_gettime"); + } else { + printf("clock time: %ld.%09ld or %s", + ts.tv_sec, ts.tv_nsec, ctime(&ts.tv_sec)); + } + } + + if (settime == 1) { + clock_gettime(CLOCK_REALTIME, &ts); + if (clock_settime(clkid, &ts)) { + perror("clock_settime"); + } else { + puts("set time okay"); + } + } + + if (settime == 2) { + clock_gettime(clkid, &ts); + if (clock_settime(CLOCK_REALTIME, &ts)) { + perror("clock_settime"); + } else { + puts("set time okay"); + } + } + + if (extts) { + memset(&extts_request, 0, sizeof(extts_request)); + extts_request.index = 0; + extts_request.flags = PTP_ENABLE_FEATURE; + if (ioctl(fd, PTP_EXTTS_REQUEST, &extts_request)) { + perror("PTP_EXTTS_REQUEST"); + extts = 0; + } else { + puts("external time stamp request okay"); + } + for (; extts; extts--) { + cnt = read(fd, &event, sizeof(event)); + if (cnt != sizeof(event)) { + perror("read"); + break; + } + printf("event index %u at %lld.%09u\n", event.index, + event.t.sec, event.t.nsec); + fflush(stdout); + } + /* Disable the feature again. */ + extts_request.flags = 0; + if (ioctl(fd, PTP_EXTTS_REQUEST, &extts_request)) { + perror("PTP_EXTTS_REQUEST"); + } + } + + if (oneshot) { + install_handler(SIGALRM, handle_alarm); + /* Create a timer. */ + sigevent.sigev_notify = SIGEV_SIGNAL; + sigevent.sigev_signo = SIGALRM; + if (timer_create(clkid, &sigevent, &timerid)) { + perror("timer_create"); + return -1; + } + /* Start the timer. */ + memset(&timeout, 0, sizeof(timeout)); + timeout.it_value.tv_sec = oneshot; + if (timer_settime(timerid, 0, &timeout, NULL)) { + perror("timer_settime"); + return -1; + } + pause(); + timer_delete(timerid); + } + + if (periodic) { + install_handler(SIGALRM, handle_alarm); + /* Create a timer. */ + sigevent.sigev_notify = SIGEV_SIGNAL; + sigevent.sigev_signo = SIGALRM; + if (timer_create(clkid, &sigevent, &timerid)) { + perror("timer_create"); + return -1; + } + /* Start the timer. */ + memset(&timeout, 0, sizeof(timeout)); + timeout.it_interval.tv_sec = periodic; + timeout.it_value.tv_sec = periodic; + if (timer_settime(timerid, 0, &timeout, NULL)) { + perror("timer_settime"); + return -1; + } + while (1) { + pause(); + } + timer_delete(timerid); + } + + if (perout >= 0) { + if (clock_gettime(clkid, &ts)) { + perror("clock_gettime"); + return -1; + } + memset(&perout_request, 0, sizeof(perout_request)); + perout_request.index = 0; + perout_request.start.sec = ts.tv_sec + 2; + perout_request.start.nsec = 0; + perout_request.period.sec = 0; + perout_request.period.nsec = perout; + if (ioctl(fd, PTP_PEROUT_REQUEST, &perout_request)) { + perror("PTP_PEROUT_REQUEST"); + } else { + puts("periodic output request okay"); + } + } + + if (pps != -1) { + int enable = pps ? 1 : 0; + if (ioctl(fd, PTP_ENABLE_PPS, enable)) { + perror("PTP_ENABLE_PPS"); + } else { + puts("pps for system time request okay"); + } + } + + close(fd); + return 0; +} diff --git a/Documentation/ptp/testptp.mk b/Documentation/ptp/testptp.mk new file mode 100644 index 00000000000..4ef2d975542 --- /dev/null +++ b/Documentation/ptp/testptp.mk @@ -0,0 +1,33 @@ +# PTP 1588 clock support - User space test program +# +# Copyright (C) 2010 OMICRON electronics GmbH +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +CC = $(CROSS_COMPILE)gcc +INC = -I$(KBUILD_OUTPUT)/usr/include +CFLAGS = -Wall $(INC) +LDLIBS = -lrt +PROGS = testptp + +all: $(PROGS) + +testptp: testptp.o + +clean: + rm -f testptp.o + +distclean: clean + rm -f $(PROGS) diff --git a/Documentation/sysctl/fs.txt b/Documentation/sysctl/fs.txt index 4af0614147e..88fd7f5c8dc 100644 --- a/Documentation/sysctl/fs.txt +++ b/Documentation/sysctl/fs.txt @@ -231,13 +231,6 @@ its creation). This directory contains configuration options for the epoll(7) interface. -max_user_instances ------------------- - -This is the maximum number of epoll file descriptors that a single user can -have open at a given time. The default value is 128, and should be enough -for normal users. - max_user_watches ---------------- diff --git a/Documentation/usb/callbacks.txt b/Documentation/usb/callbacks.txt index bfb36b34b79..9e85846bdb9 100644 --- a/Documentation/usb/callbacks.txt +++ b/Documentation/usb/callbacks.txt @@ -95,9 +95,11 @@ pre_reset int (*pre_reset)(struct usb_interface *intf); -Another driver or user space is triggering a reset on the device which -contains the interface passed as an argument. Cease IO and save any -device state you need to restore. +A driver or user space is triggering a reset on the device which +contains the interface passed as an argument. Cease IO, wait for all +outstanding URBs to complete, and save any device state you need to +restore. No more URBs may be submitted until the post_reset method +is called. If you need to allocate memory here, use GFP_NOIO or GFP_ATOMIC, if you are in atomic context. diff --git a/Documentation/usb/linux-cdc-acm.inf b/Documentation/usb/linux-cdc-acm.inf index 612e7220fb2..37a02ce5484 100644 --- a/Documentation/usb/linux-cdc-acm.inf +++ b/Documentation/usb/linux-cdc-acm.inf @@ -90,10 +90,10 @@ ServiceBinary=%12%\USBSER.sys [SourceDisksFiles] [SourceDisksNames] [DeviceList] -%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_0525&PID_A4AB&MI_02 +%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02 [DeviceList.NTamd64] -%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_0525&PID_A4AB&MI_02 +%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02 ;------------------------------------------------------------------------------ diff --git a/Documentation/usb/linux.inf b/Documentation/usb/linux.inf index 4dee9585122..4ffa715b0ae 100644 --- a/Documentation/usb/linux.inf +++ b/Documentation/usb/linux.inf @@ -18,15 +18,15 @@ DriverVer = 06/21/2006,6.0.6000.16384 ; Decoration for x86 architecture [LinuxDevices.NTx86] -%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00 +%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_1d6b&PID_0104&MI_00 ; Decoration for x64 architecture [LinuxDevices.NTamd64] -%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00 +%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_1d6b&PID_0104&MI_00 ; Decoration for ia64 architecture [LinuxDevices.NTia64] -%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00 +%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_1d6b&PID_0104&MI_00 ;@@@ This is the common setting for setup [ControlFlags] diff --git a/Documentation/vgaarbiter.txt b/Documentation/vgaarbiter.txt index 43a9b0694fd..b7d401e0eae 100644 --- a/Documentation/vgaarbiter.txt +++ b/Documentation/vgaarbiter.txt @@ -14,11 +14,10 @@ the legacy VGA arbitration task (besides other bus management tasks) when more than one legacy device co-exists on the same machine. But the problem happens when these devices are trying to be accessed by different userspace clients (e.g. two server in parallel). Their address assignments conflict. Moreover, -ideally, being an userspace application, it is not the role of the the X -server to control bus resources. Therefore an arbitration scheme outside of -the X server is needed to control the sharing of these resources. This -document introduces the operation of the VGA arbiter implemented for Linux -kernel. +ideally, being a userspace application, it is not the role of the X server to +control bus resources. Therefore an arbitration scheme outside of the X server +is needed to control the sharing of these resources. This document introduces +the operation of the VGA arbiter implemented for the Linux kernel. ---------------------------------------------------------------------------- @@ -39,7 +38,7 @@ I.1 vgaarb The vgaarb is a module of the Linux Kernel. When it is initially loaded, it scans all PCI devices and adds the VGA ones inside the arbitration. The arbiter then enables/disables the decoding on different devices of the VGA -legacy instructions. Device which do not want/need to use the arbiter may +legacy instructions. Devices which do not want/need to use the arbiter may explicitly tell it by calling vga_set_legacy_decoding(). The kernel exports a char device interface (/dev/vga_arbiter) to the clients, @@ -95,8 +94,8 @@ In the case of devices hot-{un,}plugged, there is a hook - pci_notify() - to notify them being added/removed in the system and automatically added/removed in the arbiter. -There's also a in-kernel API of the arbiter in the case of DRM, vgacon and -others which may use the arbiter. +There is also an in-kernel API of the arbiter in case DRM, vgacon, or other +drivers want to use it. I.2 libpciaccess @@ -117,9 +116,8 @@ Besides it, in pci_system were added: struct pci_device *vga_default_dev; -The vga_count is usually need to keep informed how many cards are being -arbitrated, so for instance if there's only one then it can totally escape the -scheme. +The vga_count is used to track how many cards are being arbitrated, so for +instance, if there is only one card, then it can completely escape arbitration. These functions below acquire VGA resources for the given card and mark those diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 31b485723bc..9aae449440d 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -54,7 +54,7 @@ 53 -> Pinnacle Hybrid Pro (em2881) 54 -> Kworld VS-DVB-T 323UR (em2882) [eb1a:e323] 55 -> Terratec Cinnergy Hybrid T USB XS (em2882) (em2882) [0ccd:005e,0ccd:0042] - 56 -> Pinnacle Hybrid Pro (2) (em2882) [2304:0226] + 56 -> Pinnacle Hybrid Pro (330e) (em2882) [2304:0226] 57 -> Kworld PlusTV HD Hybrid 330 (em2883) [eb1a:a316] 58 -> Compro VideoMate ForYou/Stereo (em2820/em2840) [185b:2041] 60 -> Hauppauge WinTV HVR 850 (em2883) [2040:651f] diff --git a/Documentation/video4linux/Zoran b/Documentation/video4linux/Zoran index c40e3bab08f..9ed629d4874 100644 --- a/Documentation/video4linux/Zoran +++ b/Documentation/video4linux/Zoran @@ -130,7 +130,6 @@ Card number: 4 Note: No module for the mse3000 is available yet Note: No module for the vpx3224 is available yet -Note: use encoder=X or decoder=X for non-default i2c chips =========================== diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 5c542e60f51..5bfa9a777d2 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -275,6 +275,7 @@ pac7302 093a:2629 Genious iSlim 300 pac7302 093a:262a Webcam 300k pac7302 093a:262c Philips SPC 230 NC jeilinj 0979:0280 Sakar 57379 +jeilinj 0979:0280 Sportscam DV15 zc3xx 0ac8:0302 Z-star Vimicro zc0302 vc032x 0ac8:0321 Vimicro generic vc0321 vc032x 0ac8:0323 Vimicro Vc0323 diff --git a/Documentation/video4linux/uvcvideo.txt b/Documentation/video4linux/uvcvideo.txt new file mode 100644 index 00000000000..848d620dcc5 --- /dev/null +++ b/Documentation/video4linux/uvcvideo.txt @@ -0,0 +1,239 @@ +Linux USB Video Class (UVC) driver +================================== + +This file documents some driver-specific aspects of the UVC driver, such as +driver-specific ioctls and implementation notes. + +Questions and remarks can be sent to the Linux UVC development mailing list at +linux-uvc-devel@lists.berlios.de. + + +Extension Unit (XU) support +--------------------------- + +1. Introduction + +The UVC specification allows for vendor-specific extensions through extension +units (XUs). The Linux UVC driver supports extension unit controls (XU controls) +through two separate mechanisms: + + - through mappings of XU controls to V4L2 controls + - through a driver-specific ioctl interface + +The first one allows generic V4L2 applications to use XU controls by mapping +certain XU controls onto V4L2 controls, which then show up during ordinary +control enumeration. + +The second mechanism requires uvcvideo-specific knowledge for the application to +access XU controls but exposes the entire UVC XU concept to user space for +maximum flexibility. + +Both mechanisms complement each other and are described in more detail below. + + +2. Control mappings + +The UVC driver provides an API for user space applications to define so-called +control mappings at runtime. These allow for individual XU controls or byte +ranges thereof to be mapped to new V4L2 controls. Such controls appear and +function exactly like normal V4L2 controls (i.e. the stock controls, such as +brightness, contrast, etc.). However, reading or writing of such a V4L2 controls +triggers a read or write of the associated XU control. + +The ioctl used to create these control mappings is called UVCIOC_CTRL_MAP. +Previous driver versions (before 0.2.0) required another ioctl to be used +beforehand (UVCIOC_CTRL_ADD) to pass XU control information to the UVC driver. +This is no longer necessary as newer uvcvideo versions query the information +directly from the device. + +For details on the UVCIOC_CTRL_MAP ioctl please refer to the section titled +"IOCTL reference" below. + + +3. Driver specific XU control interface + +For applications that need to access XU controls directly, e.g. for testing +purposes, firmware upload, or accessing binary controls, a second mechanism to +access XU controls is provided in the form of a driver-specific ioctl, namely +UVCIOC_CTRL_QUERY. + +A call to this ioctl allows applications to send queries to the UVC driver that +directly map to the low-level UVC control requests. + +In order to make such a request the UVC unit ID of the control's extension unit +and the control selector need to be known. This information either needs to be +hardcoded in the application or queried using other ways such as by parsing the +UVC descriptor or, if available, using the media controller API to enumerate a +device's entities. + +Unless the control size is already known it is necessary to first make a +UVC_GET_LEN requests in order to be able to allocate a sufficiently large buffer +and set the buffer size to the correct value. Similarly, to find out whether +UVC_GET_CUR or UVC_SET_CUR are valid requests for a given control, a +UVC_GET_INFO request should be made. The bits 0 (GET supported) and 1 (SET +supported) of the resulting byte indicate which requests are valid. + +With the addition of the UVCIOC_CTRL_QUERY ioctl the UVCIOC_CTRL_GET and +UVCIOC_CTRL_SET ioctls have become obsolete since their functionality is a +subset of the former ioctl. For the time being they are still supported but +application developers are encouraged to use UVCIOC_CTRL_QUERY instead. + +For details on the UVCIOC_CTRL_QUERY ioctl please refer to the section titled +"IOCTL reference" below. + + +4. Security + +The API doesn't currently provide a fine-grained access control facility. The +UVCIOC_CTRL_ADD and UVCIOC_CTRL_MAP ioctls require super user permissions. + +Suggestions on how to improve this are welcome. + + +5. Debugging + +In order to debug problems related to XU controls or controls in general it is +recommended to enable the UVC_TRACE_CONTROL bit in the module parameter 'trace'. +This causes extra output to be written into the system log. + + +6. IOCTL reference + +---- UVCIOC_CTRL_MAP - Map a UVC control to a V4L2 control ---- + +Argument: struct uvc_xu_control_mapping + +Description: + This ioctl creates a mapping between a UVC control or part of a UVC + control and a V4L2 control. Once mappings are defined, userspace + applications can access vendor-defined UVC control through the V4L2 + control API. + + To create a mapping, applications fill the uvc_xu_control_mapping + structure with information about an existing UVC control defined with + UVCIOC_CTRL_ADD and a new V4L2 control. + + A UVC control can be mapped to several V4L2 controls. For instance, + a UVC pan/tilt control could be mapped to separate pan and tilt V4L2 + controls. The UVC control is divided into non overlapping fields using + the 'size' and 'offset' fields and are then independantly mapped to + V4L2 control. + + For signed integer V4L2 controls the data_type field should be set to + UVC_CTRL_DATA_TYPE_SIGNED. Other values are currently ignored. + +Return value: + On success 0 is returned. On error -1 is returned and errno is set + appropriately. + + ENOMEM + Not enough memory to perform the operation. + EPERM + Insufficient privileges (super user privileges are required). + EINVAL + No such UVC control. + EOVERFLOW + The requested offset and size would overflow the UVC control. + EEXIST + Mapping already exists. + +Data types: + * struct uvc_xu_control_mapping + + __u32 id V4L2 control identifier + __u8 name[32] V4L2 control name + __u8 entity[16] UVC extension unit GUID + __u8 selector UVC control selector + __u8 size V4L2 control size (in bits) + __u8 offset V4L2 control offset (in bits) + enum v4l2_ctrl_type + v4l2_type V4L2 control type + enum uvc_control_data_type + data_type UVC control data type + struct uvc_menu_info + *menu_info Array of menu entries (for menu controls only) + __u32 menu_count Number of menu entries (for menu controls only) + + * struct uvc_menu_info + + __u32 value Menu entry value used by the device + __u8 name[32] Menu entry name + + + * enum uvc_control_data_type + + UVC_CTRL_DATA_TYPE_RAW Raw control (byte array) + UVC_CTRL_DATA_TYPE_SIGNED Signed integer + UVC_CTRL_DATA_TYPE_UNSIGNED Unsigned integer + UVC_CTRL_DATA_TYPE_BOOLEAN Boolean + UVC_CTRL_DATA_TYPE_ENUM Enumeration + UVC_CTRL_DATA_TYPE_BITMASK Bitmask + + +---- UVCIOC_CTRL_QUERY - Query a UVC XU control ---- + +Argument: struct uvc_xu_control_query + +Description: + This ioctl queries a UVC XU control identified by its extension unit ID + and control selector. + + There are a number of different queries available that closely + correspond to the low-level control requests described in the UVC + specification. These requests are: + + UVC_GET_CUR + Obtain the current value of the control. + UVC_GET_MIN + Obtain the minimum value of the control. + UVC_GET_MAX + Obtain the maximum value of the control. + UVC_GET_DEF + Obtain the default value of the control. + UVC_GET_RES + Query the resolution of the control, i.e. the step size of the + allowed control values. + UVC_GET_LEN + Query the size of the control in bytes. + UVC_GET_INFO + Query the control information bitmap, which indicates whether + get/set requests are supported. + UVC_SET_CUR + Update the value of the control. + + Applications must set the 'size' field to the correct length for the + control. Exceptions are the UVC_GET_LEN and UVC_GET_INFO queries, for + which the size must be set to 2 and 1, respectively. The 'data' field + must point to a valid writable buffer big enough to hold the indicated + number of data bytes. + + Data is copied directly from the device without any driver-side + processing. Applications are responsible for data buffer formatting, + including little-endian/big-endian conversion. This is particularly + important for the result of the UVC_GET_LEN requests, which is always + returned as a little-endian 16-bit integer by the device. + +Return value: + On success 0 is returned. On error -1 is returned and errno is set + appropriately. + + ENOENT + The device does not support the given control or the specified + extension unit could not be found. + ENOBUFS + The specified buffer size is incorrect (too big or too small). + EINVAL + An invalid request code was passed. + EBADRQC + The given request is not supported by the given control. + EFAULT + The data pointer references an inaccessible memory area. + +Data types: + * struct uvc_xu_control_query + + __u8 unit Extension unit ID + __u8 selector Control selector + __u8 query Request code to send to the device + __u16 size Control data size (in bytes) + __u8 *data Control value diff --git a/Documentation/virtual/uml/UserModeLinux-HOWTO.txt b/Documentation/virtual/uml/UserModeLinux-HOWTO.txt index 9b7e1904db1..5d0fc8bfcdb 100644 --- a/Documentation/virtual/uml/UserModeLinux-HOWTO.txt +++ b/Documentation/virtual/uml/UserModeLinux-HOWTO.txt @@ -1182,6 +1182,16 @@ forge.net/> and explains these in detail, as well as some other issues. + There is also a related point-to-point only "ucast" transport. + This is useful when your network does not support multicast, and + all network connections are simple point to point links. + + The full set of command line options for this transport are + + + ethn=ucast,ethernet address,remote address,listen port,remote port + + 66..66.. TTUUNN//TTAAPP wwiitthh tthhee uummll__nneett hheellppeerr diff --git a/Documentation/vm/locking b/Documentation/vm/locking index 25fadb44876..f61228bd639 100644 --- a/Documentation/vm/locking +++ b/Documentation/vm/locking @@ -66,7 +66,7 @@ in some cases it is not really needed. Eg, vm_start is modified by expand_stack(), it is hard to come up with a destructive scenario without having the vmlist protection in this case. -The page_table_lock nests with the inode i_mmap_lock and the kmem cache +The page_table_lock nests with the inode i_mmap_mutex and the kmem cache c_spinlock spinlocks. This is okay, since the kmem code asks for pages after dropping c_spinlock. The page_table_lock also nests with pagecache_lock and pagemap_lru_lock spinlocks, and no code asks for memory with these locks |