20 files changed, 142 insertions, 127 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 34f51100f02..dff1f48d252 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -210,3 +210,15 @@ Users:
 		firmware assigned instance number of the PCI
 		device that can help in understanding the firmware
 		intended order of the PCI device.
+
+What:		/sys/bus/pci/devices/.../d3cold_allowed
+Date:		July 2012
+Contact:	Huang Ying <ying.huang@intel.com>
+Description:
+		d3cold_allowed is bit to control whether the corresponding PCI
+		device can be put into D3Cold state.  If it is cleared, the
+		device will never be put into D3Cold state.  If it is set, the
+		device may be put into D3Cold state if other requirements are
+		satisfied too.  Reading this attribute will show the current
+		value of d3cold_allowed bit.  Writing this attribute will set
+		the value of d3cold_allowed bit.
diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator
index e091fa87379..bc578bc6062 100644
--- a/Documentation/ABI/testing/sysfs-class-regulator
+++ b/Documentation/ABI/testing/sysfs-class-regulator
@@ -349,3 +349,24 @@ Description:
 
 		This will be one of the same strings reported by
 		the "state" attribute.
+
+What:		/sys/class/regulator/.../bypass
+Date:		September 2012
+KernelVersion:	3.7
+Contact:	Mark Brown <broonie@opensource.wolfsonmicro.com>
+Description:
+		Some regulator directories will contain a field called
+		bypass.  This indicates if the device is in bypass mode.
+
+		This will be one of the following strings:
+
+		'enabled'
+		'disabled'
+		'unknown'
+
+		'enabled' means the regulator is in bypass mode.
+
+		'disabled' means that the regulator is regulating.
+
+		'unknown' means software cannot determine the state, or
+		the reported state is invalid.
diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom
index 8d55a83d692..7fc781048b7 100644
--- a/Documentation/ABI/testing/sysfs-driver-wacom
+++ b/Documentation/ABI/testing/sysfs-driver-wacom
@@ -1,3 +1,16 @@
+WWhat:		/sys/class/hidraw/hidraw*/device/oled*_img
+Date:		June 2012
+Contact:	linux-bluetooth@vger.kernel.org
+Description:
+		The /sys/class/hidraw/hidraw*/device/oled*_img files control
+		OLED mocro displays on Intuos4 Wireless tablet. Accepted image
+		has to contain 256 bytes (64x32 px 1 bit colour). The format
+		is the same as PBM image 62x32px without header (64 bits per
+		horizontal line, 32 lines). An example of setting OLED No. 0:
+		dd bs=256 count=1 if=img_file of=[path to oled0_img]/oled0_img
+		The attribute is read only and no local copy of the image is
+		stored.
+
 What:		/sys/class/hidraw/hidraw*/device/speed
 Date:		April 2010
 Kernel Version:	2.6.35
diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt
index fc103d7a047..cdb20d41a44 100644
--- a/Documentation/RCU/checklist.txt
+++ b/Documentation/RCU/checklist.txt
@@ -310,6 +310,12 @@ over a rather long period of time, but improvements are always welcome!
 	code under the influence of preempt_disable(), you instead
 	need to use synchronize_irq() or synchronize_sched().
 
+	This same limitation also applies to synchronize_rcu_bh()
+	and synchronize_srcu(), as well as to the asynchronous and
+	expedited forms of the three primitives, namely call_rcu(),
+	call_rcu_bh(), call_srcu(), synchronize_rcu_expedited(),
+	synchronize_rcu_bh_expedited(), and synchronize_srcu_expedited().
+
 12.	Any lock acquired by an RCU callback must be acquired elsewhere
 	with softirq disabled, e.g., via spin_lock_irqsave(),
 	spin_lock_bh(), etc.  Failing to disable irq on a given
diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt
index 523364e4e1f..1927151b386 100644
--- a/Documentation/RCU/stallwarn.txt
+++ b/Documentation/RCU/stallwarn.txt
@@ -99,7 +99,7 @@ In kernels with CONFIG_RCU_FAST_NO_HZ, even more information is
 printed:
 
 	INFO: rcu_preempt detected stall on CPU
-	0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 drain=0 . timer=-1
+	0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 drain=0 . timer not pending
 	   (t=65000 jiffies)
 
 The "(64628 ticks this GP)" indicates that this CPU has taken more
@@ -116,13 +116,13 @@ number between the two "/"s is the value of the nesting, which will
 be a small positive number if in the idle loop and a very large positive
 number (as shown above) otherwise.
 
-For CONFIG_RCU_FAST_NO_HZ kernels, the "drain=0" indicates that the
-CPU is not in the process of trying to force itself into dyntick-idle
-state, the "." indicates that the CPU has not given up forcing RCU
-into dyntick-idle mode (it would be "H" otherwise), and the "timer=-1"
-indicates that the CPU has not recented forced RCU into dyntick-idle
-mode (it would otherwise indicate the number of microseconds remaining
-in this forced state).
+For CONFIG_RCU_FAST_NO_HZ kernels, the "drain=0" indicates that the CPU is
+not in the process of trying to force itself into dyntick-idle state, the
+"." indicates that the CPU has not given up forcing RCU into dyntick-idle
+mode (it would be "H" otherwise), and the "timer not pending" indicates
+that the CPU has not recently forced RCU into dyntick-idle mode (it
+would otherwise indicate the number of microseconds remaining in this
+forced state).
 
 
 Multiple Warnings From One Stall
diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt
index f6f15ce3990..672d1908325 100644
--- a/Documentation/RCU/trace.txt
+++ b/Documentation/RCU/trace.txt
@@ -333,23 +333,23 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
 The output of "cat rcu/rcu_pending" looks as follows:
 
 rcu_sched:
-  0 np=255892 qsp=53936 rpq=85 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
-  1 np=261224 qsp=54638 rpq=33 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
-  2 np=237496 qsp=49664 rpq=23 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629
-  3 np=236249 qsp=48766 rpq=98 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723
-  4 np=221310 qsp=46850 rpq=7 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110
-  5 np=237332 qsp=48449 rpq=9 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456
-  6 np=219995 qsp=46718 rpq=12 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834
-  7 np=249893 qsp=49390 rpq=42 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888
+  0 np=255892 qsp=53936 rpq=85 cbr=0 cng=14417 gpc=10033 gps=24320 nn=146741
+  1 np=261224 qsp=54638 rpq=33 cbr=0 cng=25723 gpc=16310 gps=2849 nn=155792
+  2 np=237496 qsp=49664 rpq=23 cbr=0 cng=2762 gpc=45478 gps=1762 nn=136629
+  3 np=236249 qsp=48766 rpq=98 cbr=0 cng=286 gpc=48049 gps=1218 nn=137723
+  4 np=221310 qsp=46850 rpq=7 cbr=0 cng=26 gpc=43161 gps=4634 nn=123110
+  5 np=237332 qsp=48449 rpq=9 cbr=0 cng=54 gpc=47920 gps=3252 nn=137456
+  6 np=219995 qsp=46718 rpq=12 cbr=0 cng=50 gpc=42098 gps=6093 nn=120834
+  7 np=249893 qsp=49390 rpq=42 cbr=0 cng=72 gpc=38400 gps=17102 nn=144888
 rcu_bh:
-  0 np=146741 qsp=1419 rpq=6 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314
-  1 np=155792 qsp=12597 rpq=3 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180
-  2 np=136629 qsp=18680 rpq=1 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936
-  3 np=137723 qsp=2843 rpq=0 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863
-  4 np=123110 qsp=12433 rpq=0 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671
-  5 np=137456 qsp=4210 rpq=1 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235
-  6 np=120834 qsp=9902 rpq=2 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
-  7 np=144888 qsp=26336 rpq=0 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
+  0 np=146741 qsp=1419 rpq=6 cbr=0 cng=6 gpc=0 gps=0 nn=145314
+  1 np=155792 qsp=12597 rpq=3 cbr=0 cng=0 gpc=4 gps=8 nn=143180
+  2 np=136629 qsp=18680 rpq=1 cbr=0 cng=0 gpc=7 gps=6 nn=117936
+  3 np=137723 qsp=2843 rpq=0 cbr=0 cng=0 gpc=10 gps=7 nn=134863
+  4 np=123110 qsp=12433 rpq=0 cbr=0 cng=0 gpc=4 gps=2 nn=110671
+  5 np=137456 qsp=4210 rpq=1 cbr=0 cng=0 gpc=6 gps=5 nn=133235
+  6 np=120834 qsp=9902 rpq=2 cbr=0 cng=0 gpc=6 gps=3 nn=110921
+  7 np=144888 qsp=26336 rpq=0 cbr=0 cng=0 gpc=8 gps=2 nn=118542
 
 As always, this is once again split into "rcu_sched" and "rcu_bh"
 portions, with CONFIG_TREE_PREEMPT_RCU kernels having an additional
@@ -377,17 +377,6 @@ o	"gpc" is the number of times that an old grace period had
 o	"gps" is the number of times that a new grace period had started,
 	but this CPU was not yet aware of it.
 
-o	"nf" is the number of times that this CPU suspected that the
-	current grace period had run for too long, and thus needed to
-	be forced.
-
-	Please note that "forcing" consists of sending resched IPIs
-	to holdout CPUs.  If that CPU really still is in an old RCU
-	read-side critical section, then we really do have to wait for it.
-	The assumption behing "forcing" is that the CPU is not still in
-	an old RCU read-side critical section, but has not yet responded
-	for some other reason.
-
 o	"nn" is the number of times that this CPU needed nothing.  Alert
 	readers will note that the rcu "nn" number for a given CPU very
 	closely matches the rcu_bh "np" number for that same CPU.  This
diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt
index 69ee188515e..bf0f6de2aa0 100644
--- a/Documentation/RCU/whatisRCU.txt
+++ b/Documentation/RCU/whatisRCU.txt
@@ -873,7 +873,7 @@ d.	Do you need to treat NMI handlers, hardirq handlers,
 	and code segments with preemption disabled (whether
 	via preempt_disable(), local_irq_save(), local_bh_disable(),
 	or some other mechanism) as if they were explicit RCU readers?
-	If so, you need RCU-sched.
+	If so, RCU-sched is the only choice that will work for you.
 
 e.	Do you need RCU grace periods to complete even in the face
 	of softirq monopolization of one or more of the CPUs?  For
@@ -884,7 +884,12 @@ f.	Is your workload too update-intensive for normal use of
 	RCU, but inappropriate for other synchronization mechanisms?
 	If so, consider SLAB_DESTROY_BY_RCU.  But please be careful!
 
-g.	Otherwise, use RCU.
+g.	Do you need read-side critical sections that are respected
+	even though they are in the middle of the idle loop, during
+	user-mode execution, or on an offlined CPU?  If so, SRCU is the
+	only choice that will work for you.
+
+h.	Otherwise, use RCU.
 
 Of course, this all assumes that you have determined that RCU is in fact
 the right tool for your job.
diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index f6318f6d7ba..6f706aca204 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -98,10 +98,9 @@ static int create_nl_socket(int protocol)
 	if (rcvbufsz)
 		if (setsockopt(fd, SOL_SOCKET, SO_RCVBUF,
 				&rcvbufsz, sizeof(rcvbufsz)) < 0) {
-			fprintf(stderr, "Unable to set socket rcv buf size "
-					"to %d\n",
+			fprintf(stderr, "Unable to set socket rcv buf size to %d\n",
 				rcvbufsz);
-			return -1;
+			goto error;
 		}
 
 	memset(&local, 0, sizeof(local));
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index 66ece3f87bb..ecfc6ccd67e 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -11,10 +11,13 @@ Optional properties:
 - regulator-boot-on: bootloader/firmware enabled regulator
 - <name>-supply: phandle to the parent supply/regulator node
 - regulator-ramp-delay: ramp delay for regulator(in uV/uS)
+
+Deprecated properties:
 - regulator-compatible: If a regulator chip contains multiple
   regulators, and if the chip's binding contains a child node that
   describes each regulator, then this property indicates which regulator
-  this child node is intended to configure.
+  this child node is intended to configure. If this property is missing,
+  the node's name will be used instead.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt
index 0487e9675ba..d316fb895da 100644
--- a/Documentation/devicetree/bindings/regulator/tps65217.txt
+++ b/Documentation/devicetree/bindings/regulator/tps65217.txt
@@ -22,66 +22,49 @@ Example:
 		compatible = "ti,tps65217";
 
 		regulators {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			dcdc1_reg: regulator@0 {
-				reg = <0>;
-				regulator-compatible = "dcdc1";
+			dcdc1_reg: dcdc1 {
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			dcdc2_reg: regulator@1 {
-				reg = <1>;
-				regulator-compatible = "dcdc2";
+			dcdc2_reg: dcdc2 {
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			dcdc3_reg: regulator@2 {
-				reg = <2>;
-				regulator-compatible = "dcdc3";
+			dcdc3_reg: dcc3 {
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			ldo1_reg: regulator@3 {
-				reg = <3>;
-				regulator-compatible = "ldo1";
+			ldo1_reg: ldo1 {
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			ldo2_reg: regulator@4 {
-				reg = <4>;
-				regulator-compatible = "ldo2";
+			ldo2_reg: ldo2 {
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			ldo3_reg: regulator@5 {
-				reg = <5>;
-				regulator-compatible = "ldo3";
+			ldo3_reg: ldo3 {
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			ldo4_reg: regulator@6 {
-				reg = <6>;
-				regulator-compatible = "ldo4";
+			ldo4_reg: ldo4 {
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt
index da80c2ae091..07b9ef6e49d 100644
--- a/Documentation/devicetree/bindings/regulator/tps6586x.txt
+++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt
@@ -6,9 +6,13 @@ Required properties:
 - interrupts: the interrupt outputs of the controller
 - #gpio-cells: number of cells to describe a GPIO
 - gpio-controller: mark the device as a GPIO controller
-- regulators: list of regulators provided by this controller, must have
-  property "regulator-compatible" to match their hardware counterparts:
-  sm[0-2], ldo[0-9] and ldo_rtc
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name (or the deprecated
+  regulator-compatible property if present), with valid values listed below.
+  The content of each sub-node is defined by the standard binding for
+  regulators; see regulator.txt.
+  sys, sm[0-2], ldo[0-9] and ldo_rtc
+- sys-supply: The input supply for SYS.
 - vin-sm0-supply: The input supply for the SM0.
 - vin-sm1-supply: The input supply for the SM1.
 - vin-sm2-supply: The input supply for the SM2.
@@ -20,6 +24,9 @@ Required properties:
 
 Each regulator is defined using the standard binding for regulators.
 
+Note: LDO5 and LDO_RTC is supplied by SYS regulator internally and driver
+      take care of making proper parent child relationship.
+
 Example:
 
 	pmu: tps6586x@34 {
@@ -30,6 +37,7 @@ Example:
 		#gpio-cells = <2>;
 		gpio-controller;
 
+		sys-supply = <&some_reg>;
 		vin-sm0-supply = <&some_reg>;
 		vin-sm1-supply = <&some_reg>;
 		vin-sm2-supply = <&some_reg>;
@@ -40,103 +48,80 @@ Example:
 		vinldo9-supply = <...>;
 
 		regulators {
-			#address-cells = <1>;
-			#size-cells = <0>;
+			sys_reg: sys {
+				regulator-name = "vdd_sys";
+				regulator-boot-on;
+				regulator-always-on;
+			};
 
-			sm0_reg: regulator@0 {
-				reg = <0>;
-				regulator-compatible = "sm0";
+			sm0_reg: sm0 {
 				regulator-min-microvolt = < 725000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			sm1_reg: regulator@1 {
-				reg = <1>;
-				regulator-compatible = "sm1";
+			sm1_reg: sm1 {
 				regulator-min-microvolt = < 725000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			sm2_reg: regulator@2 {
-				reg = <2>;
-				regulator-compatible = "sm2";
+			sm2_reg: sm2 {
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <4550000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			ldo0_reg: regulator@3 {
-				reg = <3>;
-				regulator-compatible = "ldo0";
+			ldo0_reg: ldo0 {
 				regulator-name = "PCIE CLK";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo1_reg: regulator@4 {
-				reg = <4>;
-				regulator-compatible = "ldo1";
+			ldo1_reg: ldo1 {
 				regulator-min-microvolt = < 725000>;
 				regulator-max-microvolt = <1500000>;
 			};
 
-			ldo2_reg: regulator@5 {
-				reg = <5>;
-				regulator-compatible = "ldo2";
+			ldo2_reg: ldo2 {
 				regulator-min-microvolt = < 725000>;
 				regulator-max-microvolt = <1500000>;
 			};
 
-			ldo3_reg: regulator@6 {
-				reg = <6>;
-				regulator-compatible = "ldo3";
+			ldo3_reg: ldo3 {
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo4_reg: regulator@7 {
-				reg = <7>;
-				regulator-compatible = "ldo4";
+			ldo4_reg: ldo4 {
 				regulator-min-microvolt = <1700000>;
 				regulator-max-microvolt = <2475000>;
 			};
 
-			ldo5_reg: regulator@8 {
-				reg = <8>;
-				regulator-compatible = "ldo5";
+			ldo5_reg: ldo5 {
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo6_reg: regulator@9 {
-				reg = <9>;
-				regulator-compatible = "ldo6";
+			ldo6_reg: ldo6 {
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo7_reg: regulator@10 {
-				reg = <10>;
-				regulator-compatible = "ldo7";
+			ldo7_reg: ldo7 {
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo8_reg: regulator@11 {
-				reg = <11>;
-				regulator-compatible = "ldo8";
+			ldo8_reg: ldo8 {
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo9_reg: regulator@12 {
-				reg = <12>;
-				regulator-compatible = "ldo9";
+			ldo9_reg: ldo9 {
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index 39462cf35cd..74c25c8d888 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -162,7 +162,6 @@ mach-types.h
 machtypes.h
 map
 map_hugetlb
-maui_boot.h
 media
 mconf
 miboot*
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index afaff312bf4..f4d8c7105fc 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -579,7 +579,7 @@ Why:	KVM tracepoints provide mostly equivalent information in a much more
 ----------------------------
 
 What:	at91-mci driver ("CONFIG_MMC_AT91")
-When:	3.7
+When:	3.8
 Why:	There are two mci drivers: at91-mci and atmel-mci. The PDC support
 	was added to atmel-mci as a first step to support more chips.
 	Then at91-mci was kept only for old IP versions (on at91rm9200 and
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 615142da4ef..157416e78cc 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -21,6 +21,7 @@ Supported adapters:
   * Intel DH89xxCC (PCH)
   * Intel Panther Point (PCH)
   * Intel Lynx Point (PCH)
+  * Intel Lynx Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/Documentation/ia64/aliasing-test.c b/Documentation/ia64/aliasing-test.c
index 5caa2af3320..62a190d45f3 100644
--- a/Documentation/ia64/aliasing-test.c
+++ b/Documentation/ia64/aliasing-test.c
@@ -132,6 +132,7 @@ static int read_rom(char *path)
 
 	rc = write(fd, "1", 2);
 	if (rc <= 0) {
+		close(fd);
 		perror("write");
 		return -1;
 	}
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 46a6a8288de..df551dfa8e5 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2391,6 +2391,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	rcutree.rcu_cpu_stall_timeout= [KNL,BOOT]
 			Set timeout for RCU CPU stall warning messages.
 
+	rcutree.jiffies_till_first_fqs= [KNL,BOOT]
+			Set delay from grace-period initialization to
+			first attempt to force quiescent states.
+			Units are jiffies, minimum value is zero,
+			and maximum value is HZ.
+
+	rcutree.jiffies_till_next_fqs= [KNL,BOOT]
+			Set delay between subsequent attempts to force
+			quiescent states.  Units are jiffies, minimum
+			value is one, and maximum value is HZ.
+
 	rcutorture.fqs_duration= [KNL,BOOT]
 			Set duration of force_quiescent_state bursts.
 
@@ -2644,9 +2655,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	smart2=		[HW]
 			Format: <io1>[,<io2>[,...,<io8>]]
 
-	smp-alt-once	[X86-32,SMP] On a hotplug CPU system, only
-			attempt to substitute SMP alternatives once at boot.
-
 	smsc-ircc2.nopnp	[HW] Don't use PNP to discover SMC devices
 	smsc-ircc2.ircc_cfg=	[HW] Device configuration I/O port
 	smsc-ircc2.ircc_sir=	[HW] SIR base I/O port
diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt
index 92341b84250..0b4b63e7e9b 100644
--- a/Documentation/power/swsusp.txt
+++ b/Documentation/power/swsusp.txt
@@ -53,7 +53,7 @@ before suspend (it is limited to 500 MB by default).
 
 Article about goals and implementation of Software Suspend for Linux
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Author: Gábor Kuti
+Author: Gábor Kuti
 Last revised: 2003-10-20 by Pavel Machek
 
 Idea and goals to achieve
diff --git a/Documentation/scheduler/sched-arch.txt b/Documentation/scheduler/sched-arch.txt
index 28aa1075e29..b1b8587b86f 100644
--- a/Documentation/scheduler/sched-arch.txt
+++ b/Documentation/scheduler/sched-arch.txt
@@ -17,16 +17,6 @@ you must `#define __ARCH_WANT_UNLOCKED_CTXSW` in a header file
 Unlocked context switches introduce only a very minor performance
 penalty to the core scheduler implementation in the CONFIG_SMP case.
 
-2. Interrupt status
-By default, the switch_to arch function is called with interrupts
-disabled. Interrupts may be enabled over the call if it is likely to
-introduce a significant interrupt latency by adding the line
-`#define __ARCH_WANT_INTERRUPTS_ON_CTXSW` in the same place as for
-unlocked context switches. This define also implies
-`__ARCH_WANT_UNLOCKED_CTXSW`. See arch/arm/include/asm/system.h for an
-example.
-
-
 CPU idle
 ========
 Your cpu_idle routines need to obey the following rules:
diff --git a/Documentation/trace/kprobetrace.txt b/Documentation/trace/kprobetrace.txt
index d0d0bb9e3e2..d68ea5fc812 100644
--- a/Documentation/trace/kprobetrace.txt
+++ b/Documentation/trace/kprobetrace.txt
@@ -12,7 +12,7 @@ kprobes can probe (this means, all functions body except for __kprobes
 functions). Unlike the Tracepoint based event, this can be added and removed
 dynamically, on the fly.
 
-To enable this feature, build your kernel with CONFIG_KPROBE_TRACING=y.
+To enable this feature, build your kernel with CONFIG_KPROBE_EVENT=y.
 
 Similar to the events tracer, this doesn't need to be activated via
 current_tracer. Instead of that, add probe points via
diff --git a/Documentation/vfio.txt b/Documentation/vfio.txt
index 0cb6685c802..8eda3635a17 100644
--- a/Documentation/vfio.txt
+++ b/Documentation/vfio.txt
@@ -133,7 +133,7 @@ character devices for this group:
 $ lspci -n -s 0000:06:0d.0
 06:0d.0 0401: 1102:0002 (rev 08)
 # echo 0000:06:0d.0 > /sys/bus/pci/devices/0000:06:0d.0/driver/unbind
-# echo 1102 0002 > /sys/bus/pci/drivers/vfio/new_id
+# echo 1102 0002 > /sys/bus/pci/drivers/vfio-pci/new_id
 
 Now we need to look at what other devices are in the group to free
 it for use by VFIO: