diff options
Diffstat (limited to 'Documentation')
29 files changed, 287 insertions, 168 deletions
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index b638e50cf8f..9c27e5125dd 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -50,7 +50,9 @@ <sect1><title>Delaying, scheduling, and timer routines</title> !Iinclude/linux/sched.h -!Ekernel/sched.c +!Ekernel/sched/core.c +!Ikernel/sched/cpupri.c +!Ikernel/sched/fair.c !Iinclude/linux/completion.h !Ekernel/timer.c </sect1> @@ -100,9 +102,12 @@ X!Iinclude/linux/kobject.h !Iinclude/linux/device.h </sect1> <sect1><title>Device Drivers Base</title> +!Idrivers/base/init.c !Edrivers/base/driver.c !Edrivers/base/core.c +!Edrivers/base/syscore.c !Edrivers/base/class.c +!Idrivers/base/node.c !Edrivers/base/firmware_class.c !Edrivers/base/transport_class.c <!-- Cannot be included, because @@ -111,7 +116,7 @@ X!Iinclude/linux/kobject.h exceed allowed 44 characters maximum X!Edrivers/base/attribute_container.c --> -!Edrivers/base/sys.c +!Edrivers/base/dd.c <!-- X!Edrivers/base/interface.c --> @@ -119,6 +124,11 @@ X!Edrivers/base/interface.c !Edrivers/base/platform.c !Edrivers/base/bus.c </sect1> + <sect1><title>Device Drivers DMA Management</title> +!Edrivers/base/dma-buf.c +!Edrivers/base/dma-coherent.c +!Edrivers/base/dma-mapping.c + </sect1> <sect1><title>Device Drivers Power Management</title> !Edrivers/base/power/main.c </sect1> @@ -216,9 +226,8 @@ X!Isound/sound_firmware.c <chapter id="uart16x50"> <title>16x50 UART Driver</title> -!Iinclude/linux/serial_core.h !Edrivers/tty/serial/serial_core.c -!Edrivers/tty/serial/8250.c +!Edrivers/tty/serial/8250/8250.c </chapter> <chapter id="fbdev"> diff --git a/Documentation/DocBook/deviceiobook.tmpl b/Documentation/DocBook/deviceiobook.tmpl index c1ed6a49e59..54199a0dcf9 100644 --- a/Documentation/DocBook/deviceiobook.tmpl +++ b/Documentation/DocBook/deviceiobook.tmpl @@ -317,7 +317,7 @@ CPU B: spin_unlock_irqrestore(&dev_lock, flags) <chapter id="pubfunctions"> <title>Public Functions Provided</title> !Iarch/x86/include/asm/io.h -!Elib/iomap.c +!Elib/pci_iomap.c </chapter> </book> diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml index ffee1fbbc00..c7a4ca51785 100644 --- a/Documentation/DocBook/media/dvb/dvbproperty.xml +++ b/Documentation/DocBook/media/dvb/dvbproperty.xml @@ -163,14 +163,16 @@ get/set up to 64 properties. The actual meaning of each property is described on <section id="DTV-FREQUENCY"> <title><constant>DTV_FREQUENCY</constant></title> - <para>Central frequency of the channel, in HZ.</para> + <para>Central frequency of the channel.</para> <para>Notes:</para> - <para>1)For ISDB-T, the channels are usually transmitted with an offset of 143kHz. + <para>1)For satellital delivery systems, it is measured in kHz. + For the other ones, it is measured in Hz.</para> + <para>2)For ISDB-T, the channels are usually transmitted with an offset of 143kHz. E.g. a valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of the channel which is 6MHz.</para> - <para>2)As in ISDB-Tsb the channel consists of only one or three segments the + <para>3)As in ISDB-Tsb the channel consists of only one or three segments the frequency step is 429kHz, 3*429 respectively. As for ISDB-T the central frequency of the channel is expected.</para> </section> @@ -735,14 +737,10 @@ typedef enum fe_hierarchy { <listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem> <listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem> <listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem> - <listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem> <listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem> <listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-CODE-RATE-HP"><constant>DTV_CODE_RATE_HP</constant></link></para></listitem> - <listitem><para><link linkend="DTV-CODE-RATE-LP"><constant>DTV_CODE_RATE_LP</constant></link></para></listitem> <listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem> <listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem> <listitem><para><link linkend="DTV-ISDBT-LAYER-ENABLED"><constant>DTV_ISDBT_LAYER_ENABLED</constant></link></para></listitem> <listitem><para><link linkend="DTV-ISDBT-PARTIAL-RECEPTION"><constant>DTV_ISDBT_PARTIAL_RECEPTION</constant></link></para></listitem> <listitem><para><link linkend="DTV-ISDBT-SOUND-BROADCASTING"><constant>DTV_ISDBT_SOUND_BROADCASTING</constant></link></para></listitem> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml index 6f1f9a629dc..b17a7aac699 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml @@ -183,7 +183,12 @@ applications must set the array to zero.</entry> <entry>__u32</entry> <entry><structfield>ctrl_class</structfield></entry> <entry>The control class to which all controls belong, see -<xref linkend="ctrl-class" />.</entry> +<xref linkend="ctrl-class" />. Drivers that use a kernel framework for handling +controls will also accept a value of 0 here, meaning that the controls can +belong to any control class. Whether drivers support this can be tested by setting +<structfield>ctrl_class</structfield> to 0 and calling <constant>VIDIOC_TRY_EXT_CTRLS</constant> +with a <structfield>count</structfield> of 0. If that succeeds, then the driver +supports this feature.</entry> </row> <row> <entry>__u32</entry> @@ -194,10 +199,13 @@ also be zero.</entry> <row> <entry>__u32</entry> <entry><structfield>error_idx</structfield></entry> - <entry>Set by the driver in case of an error. It is the -index of the control causing the error or equal to 'count' when the -error is not associated with a particular control. Undefined when the -ioctl returns 0 (success).</entry> + <entry>Set by the driver in case of an error. If it is equal +to <structfield>count</structfield>, then no actual changes were made to +controls. In other words, the error was not associated with setting a particular +control. If it is another value, then only the controls up to <structfield>error_idx-1</structfield> +were modified and control <structfield>error_idx</structfield> is the one that +caused the error. The <structfield>error_idx</structfield> value is undefined +if the ioctl returned 0 (success).</entry> </row> <row> <entry>__u32</entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml index 93817f33703..7c63815e7af 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml @@ -364,15 +364,20 @@ capability and it is cleared otherwise.</entry> <row> <entry><constant>V4L2_FBUF_FLAG_OVERLAY</constant></entry> <entry>0x0002</entry> - <entry>The frame buffer is an overlay surface the same -size as the capture. [?]</entry> - </row> - <row> - <entry spanname="hspan">The purpose of -<constant>V4L2_FBUF_FLAG_OVERLAY</constant> was never quite clear. -Most drivers seem to ignore this flag. For compatibility with the -<wordasword>bttv</wordasword> driver applications should set the -<constant>V4L2_FBUF_FLAG_OVERLAY</constant> flag.</entry> + <entry>If this flag is set for a video capture device, then the +driver will set the initial overlay size to cover the full framebuffer size, +otherwise the existing overlay size (as set by &VIDIOC-S-FMT;) will be used. + +Only one video capture driver (bttv) supports this flag. The use of this flag +for capture devices is deprecated. There is no way to detect which drivers +support this flag, so the only reliable method of setting the overlay size is +through &VIDIOC-S-FMT;. + +If this flag is set for a video output device, then the video output overlay +window is relative to the top-left corner of the framebuffer and restricted +to the size of the framebuffer. If it is cleared, then the video output +overlay window is relative to the video output display. + </entry> </row> <row> <entry><constant>V4L2_FBUF_FLAG_CHROMAKEY</constant></entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml index 16431813beb..66e9a525786 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml @@ -98,8 +98,11 @@ the &v4l2-output; <structfield>modulator</structfield> field and the <entry>&v4l2-tuner-type;</entry> <entry><structfield>type</structfield></entry> <entry>The tuner type. This is the same value as in the -&v4l2-tuner; <structfield>type</structfield> field. The field is not -applicable to modulators, &ie; ignored by drivers.</entry> +&v4l2-tuner; <structfield>type</structfield> field. The type must be set +to <constant>V4L2_TUNER_RADIO</constant> for <filename>/dev/radioX</filename> +device nodes, and to <constant>V4L2_TUNER_ANALOG_TV</constant> +for all others. The field is not applicable to modulators, &ie; ignored +by drivers.</entry> </row> <row> <entry>__u32</entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-input.xml b/Documentation/DocBook/media/v4l/vidioc-g-input.xml index 08ae82f131f..1d43065090d 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-input.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-input.xml @@ -61,8 +61,8 @@ desired input in an integer and call the <constant>VIDIOC_S_INPUT</constant> ioctl with a pointer to this integer. Side effects are possible. For example inputs may support different video standards, so the driver may implicitly switch the -current standard. It is good practice to select an input before -querying or negotiating any other parameters.</para> +current standard. Because of these possible side effects applications +must select an input before querying or negotiating any other parameters.</para> <para>Information about video inputs is available using the &VIDIOC-ENUMINPUT; ioctl.</para> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-output.xml b/Documentation/DocBook/media/v4l/vidioc-g-output.xml index fd45f1c13cc..4533068ecb8 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-output.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-output.xml @@ -61,8 +61,9 @@ desired output in an integer and call the <constant>VIDIOC_S_OUTPUT</constant> ioctl with a pointer to this integer. Side effects are possible. For example outputs may support different video standards, so the driver may implicitly switch the current -standard. It is good practice to select an output before querying or -negotiating any other parameters.</para> +standard. +standard. Because of these possible side effects applications +must select an output before querying or negotiating any other parameters.</para> <para>Information about video outputs is available using the &VIDIOC-ENUMOUTPUT; ioctl.</para> diff --git a/Documentation/acpi/apei/einj.txt b/Documentation/acpi/apei/einj.txt index 5cc699ba545..e7cc3639721 100644 --- a/Documentation/acpi/apei/einj.txt +++ b/Documentation/acpi/apei/einj.txt @@ -47,20 +47,53 @@ directory apei/einj. The following files are provided. - param1 This file is used to set the first error parameter value. Effect of - parameter depends on error_type specified. For memory error, this is - physical memory address. Only available if param_extension module - parameter is specified. + parameter depends on error_type specified. - param2 This file is used to set the second error parameter value. Effect of - parameter depends on error_type specified. For memory error, this is - physical memory address mask. Only available if param_extension - module parameter is specified. + parameter depends on error_type specified. + +BIOS versions based in the ACPI 4.0 specification have limited options +to control where the errors are injected. Your BIOS may support an +extension (enabled with the param_extension=1 module parameter, or +boot command line einj.param_extension=1). This allows the address +and mask for memory injections to be specified by the param1 and +param2 files in apei/einj. + +BIOS versions using the ACPI 5.0 specification have more control over +the target of the injection. For processor related errors (type 0x1, +0x2 and 0x4) the APICID of the target should be provided using the +param1 file in apei/einj. For memory errors (type 0x8, 0x10 and 0x20) +the address is set using param1 with a mask in param2 (0x0 is equivalent +to all ones). For PCI express errors (type 0x40, 0x80 and 0x100) the +segment, bus, device and function are specified using param1: + + 31 24 23 16 15 11 10 8 7 0 + +-------------------------------------------------+ + | segment | bus | device | function | reserved | + +-------------------------------------------------+ + +An ACPI 5.0 BIOS may also allow vendor specific errors to be injected. +In this case a file named vendor will contain identifying information +from the BIOS that hopefully will allow an application wishing to use +the vendor specific extension to tell that they are running on a BIOS +that supports it. All vendor extensions have the 0x80000000 bit set in +error_type. A file vendor_flags controls the interpretation of param1 +and param2 (1 = PROCESSOR, 2 = MEMORY, 4 = PCI). See your BIOS vendor +documentation for details (and expect changes to this API if vendors +creativity in using this feature expands beyond our expectations). + +Example: +# cd /sys/kernel/debug/apei/einj +# cat available_error_type # See which errors can be injected +0x00000002 Processor Uncorrectable non-fatal +0x00000008 Memory Correctable +0x00000010 Memory Uncorrectable non-fatal +# echo 0x12345000 > param1 # Set memory address for injection +# echo 0xfffffffffffff000 > param2 # Mask - anywhere in this page +# echo 0x8 > error_type # Choose correctable memory error +# echo 1 > error_inject # Inject now -Injecting parameter support is a BIOS version specific extension, that -is, it only works on some BIOS version. If you want to use it, please -make sure your BIOS version has the proper support and specify -"param_extension=y" in module parameter. For more information about EINJ, please refer to ACPI specification -version 4.0, section 17.5. +version 4.0, section 17.5 and ACPI 5.0, section 18.6. diff --git a/Documentation/devices.txt b/Documentation/devices.txt index cec8864ce4e..00383186d8f 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -447,6 +447,9 @@ Your cooperation is appreciated. 234 = /dev/btrfs-control Btrfs control device 235 = /dev/autofs Autofs control device 236 = /dev/mapper/control Device-Mapper control device + 237 = /dev/loop-control Loopback control device + 238 = /dev/vhost-net Host kernel accelerator for virtio net + 240-254 Reserved for local use 255 Reserved for MISC_DYNAMIC_MINOR diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt new file mode 100644 index 00000000000..3c046ee6e8b --- /dev/null +++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt @@ -0,0 +1,14 @@ +* Atmel Direct Memory Access Controller (DMA) + +Required properties: +- compatible: Should be "atmel,<chip>-dma" +- reg: Should contain DMA registers location and length +- interrupts: Should contain DMA interrupt + +Examples: + +dma@ffffec00 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffec00 0x200>; + interrupts = <21>; +}; diff --git a/Documentation/devicetree/bindings/i2c/omap-i2c.txt b/Documentation/devicetree/bindings/i2c/omap-i2c.txt new file mode 100644 index 00000000000..56564aa4b44 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/omap-i2c.txt @@ -0,0 +1,30 @@ +I2C for OMAP platforms + +Required properties : +- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c" +- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based) +- #address-cells = <1>; +- #size-cells = <0>; + +Recommended properties : +- clock-frequency : Desired I2C bus clock frequency in Hz. Otherwise + the default 100 kHz frequency will be used. + +Optional properties: +- Child nodes conforming to i2c bus binding + +Note: Current implementation will fetch base address, irq and dma +from omap hwmod data base during device registration. +Future plan is to migrate hwmod data base contents into device tree +blob so that, all the required data will be used from device tree dts +file. + +Examples : + +i2c1: i2c@0 { + compatible = "ti,omap3-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + clock-frequency = <400000>; +}; diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt index 94b7e0f96b3..bbe6cb3d185 100644 --- a/Documentation/dmaengine.txt +++ b/Documentation/dmaengine.txt @@ -75,6 +75,10 @@ The slave DMA usage consists of following steps: slave_sg - DMA a list of scatter gather buffers from/to a peripheral dma_cyclic - Perform a cyclic DMA operation from/to a peripheral till the operation is explicitly stopped. + interleaved_dma - This is common to Slave as well as M2M clients. For slave + address of devices' fifo could be already known to the driver. + Various types of operations could be expressed by setting + appropriate values to the 'dma_interleaved_template' members. A non-NULL return of this transfer API represents a "descriptor" for the given transaction. @@ -89,6 +93,10 @@ The slave DMA usage consists of following steps: struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, size_t period_len, enum dma_data_direction direction); + struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)( + struct dma_chan *chan, struct dma_interleaved_template *xt, + unsigned long flags); + The peripheral driver is expected to have mapped the scatterlist for the DMA operation prior to calling device_prep_slave_sg, and must keep the scatterlist mapped until the DMA operation has completed. diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 10c64c8a13d..41c0c5d1ba1 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -233,6 +233,10 @@ certainly invest a bit more effort into libata core layer). 6. List of managed interfaces ----------------------------- +MEM + devm_kzalloc() + devm_kfree() + IO region devm_request_region() devm_request_mem_region() diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index d725c0dfe03..a0ffac029a0 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -439,17 +439,6 @@ Who: Jean Delvare <khali@linux-fr.org> ---------------------------- -What: For VIDIOC_S_FREQUENCY the type field must match the device node's type. - If not, return -EINVAL. -When: 3.2 -Why: It makes no sense to switch the tuner to radio mode by calling - VIDIOC_S_FREQUENCY on a video node, or to switch the tuner to tv mode by - calling VIDIOC_S_FREQUENCY on a radio node. This is the first step of a - move to more consistent handling of tv and radio tuners. -Who: Hans Verkuil <hans.verkuil@cisco.com> - ----------------------------- - What: Opening a radio device node will no longer automatically switch the tuner mode from tv to radio. When: 3.3 @@ -521,3 +510,17 @@ Why: The pci_scan_bus_parented() interface creates a new root bus. The convert to using pci_scan_root_bus() so they can supply a list of bus resources when the bus is created. Who: Bjorn Helgaas <bhelgaas@google.com> + +---------------------------- + +What: The CAP9 SoC family will be removed +When: 3.4 +Files: arch/arm/mach-at91/at91cap9.c + arch/arm/mach-at91/at91cap9_devices.c + arch/arm/mach-at91/include/mach/at91cap9.h + arch/arm/mach-at91/include/mach/at91cap9_matrix.h + arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h + arch/arm/mach-at91/board-cap9adk.c +Why: The code is not actively maintained and platforms are now hard to find. +Who: Nicolas Ferre <nicolas.ferre@atmel.com> + Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt index 23fcb05175b..53305bd0818 100644 --- a/Documentation/input/event-codes.txt +++ b/Documentation/input/event-codes.txt @@ -17,11 +17,11 @@ reports supported by a device are also provided by sysfs in class/input/event*/device/capabilities/, and the properties of a device are provided in class/input/event*/device/properties. -Types: -========== -Types are groupings of codes under a logical input construct. Each type has a -set of applicable codes to be used in generating events. See the Codes section -for details on valid codes for each type. +Event types: +=========== +Event types are groupings of codes under a logical input construct. Each +type has a set of applicable codes to be used in generating events. See the +Codes section for details on valid codes for each type. * EV_SYN: - Used as markers to separate events. Events may be separated in time or in @@ -63,9 +63,9 @@ for details on valid codes for each type. * EV_FF_STATUS: - Used to receive force feedback device status. -Codes: -========== -Codes define the precise type of event. +Event codes: +=========== +Event codes define the precise type of event. EV_SYN: ---------- @@ -220,6 +220,56 @@ EV_PWR: EV_PWR events are a special type of event used specifically for power mangement. Its usage is not well defined. To be addressed later. +Device properties: +================= +Normally, userspace sets up an input device based on the data it emits, +i.e., the event types. In the case of two devices emitting the same event +types, additional information can be provided in the form of device +properties. + +INPUT_PROP_DIRECT + INPUT_PROP_POINTER: +-------------------------------------- +The INPUT_PROP_DIRECT property indicates that device coordinates should be +directly mapped to screen coordinates (not taking into account trivial +transformations, such as scaling, flipping and rotating). Non-direct input +devices require non-trivial transformation, such as absolute to relative +transformation for touchpads. Typical direct input devices: touchscreens, +drawing tablets; non-direct devices: touchpads, mice. + +The INPUT_PROP_POINTER property indicates that the device is not transposed +on the screen and thus requires use of an on-screen pointer to trace user's +movements. Typical pointer devices: touchpads, tablets, mice; non-pointer +device: touchscreen. + +If neither INPUT_PROP_DIRECT or INPUT_PROP_POINTER are set, the property is +considered undefined and the device type should be deduced in the +traditional way, using emitted event types. + +INPUT_PROP_BUTTONPAD: +-------------------- +For touchpads where the button is placed beneath the surface, such that +pressing down on the pad causes a button click, this property should be +set. Common in clickpad notebooks and macbooks from 2009 and onwards. + +Originally, the buttonpad property was coded into the bcm5974 driver +version field under the name integrated button. For backwards +compatibility, both methods need to be checked in userspace. + +INPUT_PROP_SEMI_MT: +------------------ +Some touchpads, most common between 2008 and 2011, can detect the presence +of multiple contacts without resolving the individual positions; only the +number of contacts and a rectangular shape is known. For such +touchpads, the semi-mt property should be set. + +Depending on the device, the rectangle may enclose all touches, like a +bounding box, or just some of them, for instance the two most recent +touches. The diversity makes the rectangle of limited use, but some +gestures can normally be extracted from it. + +If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT +device. + Guidelines: ========== The guidelines below ensure proper single-touch and multi-finger functionality. @@ -240,6 +290,8 @@ used to report when a touch is active on the screen. BTN_{MOUSE,LEFT,MIDDLE,RIGHT} must not be reported as the result of touch contact. BTN_TOOL_<name> events should be reported where possible. +For new hardware, INPUT_PROP_DIRECT should be set. + Trackpads: ---------- Legacy trackpads that only provide relative position information must report @@ -250,6 +302,8 @@ location of the touch. BTN_TOUCH should be used to report when a touch is active on the trackpad. Where multi-finger support is available, BTN_TOOL_<name> should be used to report the number of touches active on the trackpad. +For new hardware, INPUT_PROP_POINTER should be set. + Tablets: ---------- BTN_TOOL_<name> events must be reported when a stylus or other tool is active on @@ -260,3 +314,5 @@ button may be used for buttons on the tablet except BTN_{MOUSE,LEFT}. BTN_{0,1,2,etc} are good generic codes for unlabeled buttons. Do not use meaningful buttons, like BTN_FORWARD, unless the button is labeled for that purpose on the device. + +For new hardware, both INPUT_PROP_DIRECT and INPUT_PROP_POINTER should be set. diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 54078ed96b3..4840334ea97 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -149,6 +149,7 @@ Code Seq#(hex) Include File Comments 'M' 01-03 drivers/scsi/megaraid/megaraid_sas.h 'M' 00-0F drivers/video/fsl-diu-fb.h conflict! 'N' 00-1F drivers/usb/scanner.h +'N' 40-7F drivers/block/nvme.c 'O' 00-06 mtd/ubi-user.h UBI 'P' all linux/soundcard.h conflict! 'P' 60-6F sound/sscape_ioctl.h conflict! diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index b29f3c41629..033d4e69b43 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1059,6 +1059,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted. By default, super page will be supported if Intel IOMMU has the capability. With this option, super page will not be supported. + + intel_idle.max_cstate= [KNL,HW,ACPI,X86] + 0 disables intel_idle and fall back on acpi_idle. + 1 to 6 specify maximum depth of C-state. + intremap= [X86-64, Intel-IOMMU] on enable Interrupt Remapping (default) off disable Interrupt Remapping diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index 6727b92bc2f..150fd3833d0 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -857,42 +857,41 @@ case), we define a mapping like this: ... { - .name "2bit" + .name = "2bit" .ctrl_dev_name = "pinctrl-foo", .function = "mmc0", .group = "mmc0_1_grp", .dev_name = "foo-mmc.0", }, { - .name "4bit" + .name = "4bit" .ctrl_dev_name = "pinctrl-foo", .function = "mmc0", .group = "mmc0_1_grp", .dev_name = "foo-mmc.0", }, { - .name "4bit" + .name = "4bit" .ctrl_dev_name = "pinctrl-foo", .function = "mmc0", .group = "mmc0_2_grp", .dev_name = "foo-mmc.0", }, { - .name "8bit" + .name = "8bit" .ctrl_dev_name = "pinctrl-foo", - .function = "mmc0", .group = "mmc0_1_grp", .dev_name = "foo-mmc.0", }, { - .name "8bit" + .name = "8bit" .ctrl_dev_name = "pinctrl-foo", .function = "mmc0", .group = "mmc0_2_grp", .dev_name = "foo-mmc.0", }, { - .name "8bit" + .name = "8bit" .ctrl_dev_name = "pinctrl-foo", .function = "mmc0", .group = "mmc0_3_grp", @@ -995,7 +994,7 @@ This is enabled by simply setting the .hog_on_boot field in the map to true, like this: { - .name "POWERMAP" + .name = "POWERMAP" .ctrl_dev_name = "pinctrl-foo", .function = "power_func", .hog_on_boot = true, @@ -1025,7 +1024,7 @@ it, disables and releases it, and muxes it in on the pins defined by group B: foo_switch() { - struct pinmux pmx; + struct pinmux *pmx; /* Enable on position A */ pmx = pinmux_get(&device, "spi0-pos-A"); diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt index 40a4c65f380..262acf56fa7 100644 --- a/Documentation/power/basic-pm-debugging.txt +++ b/Documentation/power/basic-pm-debugging.txt @@ -15,7 +15,7 @@ test at least a couple of times in a row for confidence. [This is necessary, because some problems only show up on a second attempt at suspending and resuming the system.] Moreover, hibernating in the "reboot" and "shutdown" modes causes the PM core to skip some platform-related callbacks which on ACPI -systems might be necessary to make hibernation work. Thus, if you machine fails +systems might be necessary to make hibernation work. Thus, if your machine fails to hibernate or resume in the "reboot" mode, you should try the "platform" mode: # echo platform > /sys/power/disk diff --git a/Documentation/power/freezing-of-tasks.txt b/Documentation/power/freezing-of-tasks.txt index 6ccb68f68da..ebd7490ef1d 100644 --- a/Documentation/power/freezing-of-tasks.txt +++ b/Documentation/power/freezing-of-tasks.txt @@ -120,10 +120,10 @@ So in practice, the 'at all' may become a 'why freeze kernel threads?' and freezing user threads I don't find really objectionable." Still, there are kernel threads that may want to be freezable. For example, if -a kernel that belongs to a device driver accesses the device directly, it in -principle needs to know when the device is suspended, so that it doesn't try to -access it at that time. However, if the kernel thread is freezable, it will be -frozen before the driver's .suspend() callback is executed and it will be +a kernel thread that belongs to a device driver accesses the device directly, it +in principle needs to know when the device is suspended, so that it doesn't try +to access it at that time. However, if the kernel thread is freezable, it will +be frozen before the driver's .suspend() callback is executed and it will be thawed after the driver's .resume() callback has run, so it won't be accessing the device while it's suspended. diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index 64adb98b181..57566bacb4c 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas @@ -1,3 +1,13 @@ +Release Date : Fri. Jan 6, 2012 17:00:00 PST 2010 - + (emaild-id:megaraidlinux@lsi.com) + Adam Radford +Current Version : 00.00.06.14-rc1 +Old Version : 00.00.06.12-rc1 + 1. Fix reglockFlags for degraded raid5/6 for MR 9360/9380. + 2. Mask off flags in ioctl path to prevent memory scribble with older + MegaCLI versions. + 3. Remove poll_mode_io module paramater, sysfs node, and associated code. +------------------------------------------------------------------------------- Release Date : Wed. Oct 5, 2011 17:00:00 PST 2010 - (emaild-id:megaraidlinux@lsi.com) Adam Radford diff --git a/Documentation/scsi/LICENSE.qla4xxx b/Documentation/scsi/LICENSE.qla4xxx index 494980e4049..ab899591ecb 100644 --- a/Documentation/scsi/LICENSE.qla4xxx +++ b/Documentation/scsi/LICENSE.qla4xxx @@ -1,32 +1,11 @@ Copyright (c) 2003-2011 QLogic Corporation -QLogic Linux iSCSI HBA Driver +QLogic Linux iSCSI Driver This program includes a device driver for Linux 3.x. You may modify and redistribute the device driver code under the GNU General Public License (a copy of which is attached hereto as Exhibit A) published by the Free Software Foundation (version 2). -REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE, -THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY -EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A -PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR -BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED -TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. - -USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT -CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR -OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT, -TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN -ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN -COMBINATION WITH THIS PROGRAM. - EXHIBIT A diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt index 21fd05c28e7..f0ab5cf28fc 100644 --- a/Documentation/stable_kernel_rules.txt +++ b/Documentation/stable_kernel_rules.txt @@ -25,7 +25,8 @@ Procedure for submitting patches to the -stable tree: - Send the patch, after verifying that it follows the above rules, to stable@vger.kernel.org. You must note the upstream commit ID in the - changelog of your submission. + changelog of your submission, as well as the kernel version you wish + it to be applied to. - To have the patch automatically included in the stable tree, add the tag Cc: stable@vger.kernel.org in the sign-off area. Once the patch is merged it will be applied to diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 8c20fbd8b42..6d78841fd41 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -601,6 +601,8 @@ can be ORed together: instead of using the one provided by the hardware. 512 - A kernel warning has occurred. 1024 - A module from drivers/staging was loaded. +2048 - The system is working around a severe firmware bug. +4096 - An out-of-tree module has been loaded. ============================================================== diff --git a/Documentation/target/tcm_mod_builder.py b/Documentation/target/tcm_mod_builder.py index 7ef9b843d52..6e21b8b5263 100755 --- a/Documentation/target/tcm_mod_builder.py +++ b/Documentation/target/tcm_mod_builder.py @@ -230,14 +230,9 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "#include <linux/ctype.h>\n" buf += "#include <asm/unaligned.h>\n\n" buf += "#include <target/target_core_base.h>\n" - buf += "#include <target/target_core_transport.h>\n" - buf += "#include <target/target_core_fabric_ops.h>\n" + buf += "#include <target/target_core_fabric.h>\n" buf += "#include <target/target_core_fabric_configfs.h>\n" - buf += "#include <target/target_core_fabric_lib.h>\n" - buf += "#include <target/target_core_device.h>\n" - buf += "#include <target/target_core_tpg.h>\n" buf += "#include <target/target_core_configfs.h>\n" - buf += "#include <target/target_core_base.h>\n" buf += "#include <target/configfs_macros.h>\n\n" buf += "#include \"" + fabric_mod_name + "_base.h\"\n" buf += "#include \"" + fabric_mod_name + "_fabric.h\"\n\n" @@ -260,7 +255,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " /* " + fabric_mod_name + "_parse_wwn(name, &wwpn, 1) < 0)\n" buf += " return ERR_PTR(-EINVAL); */\n" buf += " se_nacl_new = " + fabric_mod_name + "_alloc_fabric_acl(se_tpg);\n" - buf += " if (!(se_nacl_new))\n" + buf += " if (!se_nacl_new)\n" buf += " return ERR_PTR(-ENOMEM);\n" buf += "//#warning FIXME: Hardcoded nexus depth in " + fabric_mod_name + "_make_nodeacl()\n" buf += " nexus_depth = 1;\n" @@ -308,7 +303,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " if (strict_strtoul(name + 5, 10, &tpgt) || tpgt > UINT_MAX)\n" buf += " return ERR_PTR(-EINVAL);\n\n" buf += " tpg = kzalloc(sizeof(struct " + fabric_mod_name + "_tpg), GFP_KERNEL);\n" - buf += " if (!(tpg)) {\n" + buf += " if (!tpg) {\n" buf += " printk(KERN_ERR \"Unable to allocate struct " + fabric_mod_name + "_tpg\");\n" buf += " return ERR_PTR(-ENOMEM);\n" buf += " }\n" @@ -344,7 +339,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " /* if (" + fabric_mod_name + "_parse_wwn(name, &wwpn, 1) < 0)\n" buf += " return ERR_PTR(-EINVAL); */\n\n" buf += " " + fabric_mod_port + " = kzalloc(sizeof(struct " + fabric_mod_name + "_" + fabric_mod_port + "), GFP_KERNEL);\n" - buf += " if (!(" + fabric_mod_port + ")) {\n" + buf += " if (!" + fabric_mod_port + ") {\n" buf += " printk(KERN_ERR \"Unable to allocate struct " + fabric_mod_name + "_" + fabric_mod_port + "\");\n" buf += " return ERR_PTR(-ENOMEM);\n" buf += " }\n" @@ -352,7 +347,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): if proto_ident == "FC" or proto_ident == "SAS": buf += " " + fabric_mod_port + "->" + fabric_mod_port + "_wwpn = wwpn;\n" - buf += " /* " + fabric_mod_name + "_format_wwn(&" + fabric_mod_port + "->" + fabric_mod_port + "_name[0], " + fabric_mod_name.upper() + "__NAMELEN, wwpn); */\n\n" + buf += " /* " + fabric_mod_name + "_format_wwn(&" + fabric_mod_port + "->" + fabric_mod_port + "_name[0], " + fabric_mod_name.upper() + "_NAMELEN, wwpn); */\n\n" buf += " return &" + fabric_mod_port + "->" + fabric_mod_port + "_wwn;\n" buf += "}\n\n" buf += "static void " + fabric_mod_name + "_drop_" + fabric_mod_port + "(struct se_wwn *wwn)\n" @@ -391,8 +386,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " .tpg_alloc_fabric_acl = " + fabric_mod_name + "_alloc_fabric_acl,\n" buf += " .tpg_release_fabric_acl = " + fabric_mod_name + "_release_fabric_acl,\n" buf += " .tpg_get_inst_index = " + fabric_mod_name + "_tpg_get_inst_index,\n" - buf += " .release_cmd_to_pool = " + fabric_mod_name + "_release_cmd,\n" - buf += " .release_cmd_direct = " + fabric_mod_name + "_release_cmd,\n" + buf += " .release_cmd = " + fabric_mod_name + "_release_cmd,\n" buf += " .shutdown_session = " + fabric_mod_name + "_shutdown_session,\n" buf += " .close_session = " + fabric_mod_name + "_close_session,\n" buf += " .stop_session = " + fabric_mod_name + "_stop_session,\n" @@ -405,14 +399,12 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " .set_default_node_attributes = " + fabric_mod_name + "_set_default_node_attrs,\n" buf += " .get_task_tag = " + fabric_mod_name + "_get_task_tag,\n" buf += " .get_cmd_state = " + fabric_mod_name + "_get_cmd_state,\n" - buf += " .new_cmd_failure = " + fabric_mod_name + "_new_cmd_failure,\n" buf += " .queue_data_in = " + fabric_mod_name + "_queue_data_in,\n" buf += " .queue_status = " + fabric_mod_name + "_queue_status,\n" buf += " .queue_tm_rsp = " + fabric_mod_name + "_queue_tm_rsp,\n" buf += " .get_fabric_sense_len = " + fabric_mod_name + "_get_fabric_sense_len,\n" buf += " .set_fabric_sense_len = " + fabric_mod_name + "_set_fabric_sense_len,\n" buf += " .is_state_remove = " + fabric_mod_name + "_is_state_remove,\n" - buf += " .pack_lun = " + fabric_mod_name + "_pack_lun,\n" buf += " /*\n" buf += " * Setup function pointers for generic logic in target_core_fabric_configfs.c\n" buf += " */\n" @@ -439,9 +431,9 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " * Register the top level struct config_item_type with TCM core\n" buf += " */\n" buf += " fabric = target_fabric_configfs_init(THIS_MODULE, \"" + fabric_mod_name[4:] + "\");\n" - buf += " if (!(fabric)) {\n" + buf += " if (IS_ERR(fabric)) {\n" buf += " printk(KERN_ERR \"target_fabric_configfs_init() failed\\n\");\n" - buf += " return -ENOMEM;\n" + buf += " return PTR_ERR(fabric);\n" buf += " }\n" buf += " /*\n" buf += " * Setup fabric->tf_ops from our local " + fabric_mod_name + "_ops\n" @@ -475,9 +467,9 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " printk(KERN_INFO \"" + fabric_mod_name.upper() + "[0] - Set fabric -> " + fabric_mod_name + "_fabric_configfs\\n\");\n" buf += " return 0;\n" buf += "};\n\n" - buf += "static void " + fabric_mod_name + "_deregister_configfs(void)\n" + buf += "static void __exit " + fabric_mod_name + "_deregister_configfs(void)\n" buf += "{\n" - buf += " if (!(" + fabric_mod_name + "_fabric_configfs))\n" + buf += " if (!" + fabric_mod_name + "_fabric_configfs)\n" buf += " return;\n\n" buf += " target_fabric_configfs_deregister(" + fabric_mod_name + "_fabric_configfs);\n" buf += " " + fabric_mod_name + "_fabric_configfs = NULL;\n" @@ -492,17 +484,15 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " return ret;\n\n" buf += " return 0;\n" buf += "};\n\n" - buf += "static void " + fabric_mod_name + "_exit(void)\n" + buf += "static void __exit " + fabric_mod_name + "_exit(void)\n" buf += "{\n" buf += " " + fabric_mod_name + "_deregister_configfs();\n" buf += "};\n\n" - buf += "#ifdef MODULE\n" buf += "MODULE_DESCRIPTION(\"" + fabric_mod_name.upper() + " series fabric driver\");\n" buf += "MODULE_LICENSE(\"GPL\");\n" buf += "module_init(" + fabric_mod_name + "_init);\n" buf += "module_exit(" + fabric_mod_name + "_exit);\n" - buf += "#endif\n" ret = p.write(buf) if ret: @@ -514,7 +504,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): def tcm_mod_scan_fabric_ops(tcm_dir): - fabric_ops_api = tcm_dir + "include/target/target_core_fabric_ops.h" + fabric_ops_api = tcm_dir + "include/target/target_core_fabric.h" print "Using tcm_mod_scan_fabric_ops: " + fabric_ops_api process_fo = 0; @@ -579,11 +569,7 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "#include <scsi/scsi_cmnd.h>\n" buf += "#include <scsi/libfc.h>\n\n" buf += "#include <target/target_core_base.h>\n" - buf += "#include <target/target_core_transport.h>\n" - buf += "#include <target/target_core_fabric_ops.h>\n" - buf += "#include <target/target_core_fabric_lib.h>\n" - buf += "#include <target/target_core_device.h>\n" - buf += "#include <target/target_core_tpg.h>\n" + buf += "#include <target/target_core_fabric.h>\n" buf += "#include <target/target_core_configfs.h>\n\n" buf += "#include \"" + fabric_mod_name + "_base.h\"\n" buf += "#include \"" + fabric_mod_name + "_fabric.h\"\n\n" @@ -788,7 +774,7 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "{\n" buf += " struct " + fabric_mod_name + "_nacl *nacl;\n\n" buf += " nacl = kzalloc(sizeof(struct " + fabric_mod_name + "_nacl), GFP_KERNEL);\n" - buf += " if (!(nacl)) {\n" + buf += " if (!nacl) {\n" buf += " printk(KERN_ERR \"Unable to alocate struct " + fabric_mod_name + "_nacl\\n\");\n" buf += " return NULL;\n" buf += " }\n\n" @@ -815,7 +801,7 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "}\n\n" bufi += "u32 " + fabric_mod_name + "_tpg_get_inst_index(struct se_portal_group *);\n" - if re.search('release_cmd_to_pool', fo): + if re.search('\*release_cmd\)\(', fo): buf += "void " + fabric_mod_name + "_release_cmd(struct se_cmd *se_cmd)\n" buf += "{\n" buf += " return;\n" @@ -899,13 +885,6 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "}\n\n" bufi += "int " + fabric_mod_name + "_get_cmd_state(struct se_cmd *);\n" - if re.search('new_cmd_failure\)\(', fo): - buf += "void " + fabric_mod_name + "_new_cmd_failure(struct se_cmd *se_cmd)\n" - buf += "{\n" - buf += " return;\n" - buf += "}\n\n" - bufi += "void " + fabric_mod_name + "_new_cmd_failure(struct se_cmd *);\n" - if re.search('queue_data_in\)\(', fo): buf += "int " + fabric_mod_name + "_queue_data_in(struct se_cmd *se_cmd)\n" buf += "{\n" @@ -948,15 +927,6 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "}\n\n" bufi += "int " + fabric_mod_name + "_is_state_remove(struct se_cmd *);\n" - if re.search('pack_lun\)\(', fo): - buf += "u64 " + fabric_mod_name + "_pack_lun(unsigned int lun)\n" - buf += "{\n" - buf += " WARN_ON(lun >= 256);\n" - buf += " /* Caller wants this byte-swapped */\n" - buf += " return cpu_to_le64((lun & 0xff) << 8);\n" - buf += "}\n\n" - bufi += "u64 " + fabric_mod_name + "_pack_lun(unsigned int);\n" - ret = p.write(buf) if ret: diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index b61e46f449a..1733ab947a9 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -284,7 +284,7 @@ method, the sys I/F structure will be built like this: The framework includes a simple notification mechanism, in the form of a netlink event. Netlink socket initialization is done during the _init_ of the framework. Drivers which intend to use the notification mechanism -just need to call generate_netlink_event() with two arguments viz +just need to call thermal_generate_netlink_event() with two arguments viz (originator, event). Typically the originator will be an integer assigned to a thermal_zone_device when it registers itself with the framework. The event will be one of:{THERMAL_AUX0, THERMAL_AUX1, THERMAL_CRITICAL, diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt index 26aa0573933..e2492a9d102 100644 --- a/Documentation/video4linux/v4l2-controls.txt +++ b/Documentation/video4linux/v4l2-controls.txt @@ -666,27 +666,6 @@ a control of this type whenever the first control belonging to a new control class is added. -Differences from the Spec -========================= - -There are a few places where the framework acts slightly differently from the -V4L2 Specification. Those differences are described in this section. We will -have to see whether we need to adjust the spec or not. - -1) It is no longer required to have all controls contained in a -v4l2_ext_control array be from the same control class. The framework will be -able to handle any type of control in the array. You need to set ctrl_class -to 0 in order to enable this. If ctrl_class is non-zero, then it will still -check that all controls belong to that control class. - -If you set ctrl_class to 0 and count to 0, then it will only return an error -if there are no controls at all. - -2) Clarified the way error_idx works. For get and set it will be equal to -count if nothing was done yet. If it is less than count then only the controls -up to error_idx-1 were successfully applied. - - Proposals for Extensions ======================== diff --git a/Documentation/virtual/00-INDEX b/Documentation/virtual/00-INDEX index 8e601991d91..924bd462675 100644 --- a/Documentation/virtual/00-INDEX +++ b/Documentation/virtual/00-INDEX @@ -4,8 +4,6 @@ Virtualization support in the Linux kernel. - this file. kvm/ - Kernel Virtual Machine. See also http://linux-kvm.org -lguest/ - - Extremely simple hypervisor for experimental/educational use. uml/ - User Mode Linux, builds/runs Linux kernel as a userspace program. virtio.txt |