diff options
Diffstat (limited to 'Documentation')
18 files changed, 155 insertions, 41 deletions
diff --git a/Documentation/ABI/stable/sysfs-driver-usb-usbtmc b/Documentation/ABI/stable/sysfs-driver-usb-usbtmc index 2a7f9a00cb0..e960cd027e1 100644 --- a/Documentation/ABI/stable/sysfs-driver-usb-usbtmc +++ b/Documentation/ABI/stable/sysfs-driver-usb-usbtmc @@ -1,5 +1,5 @@ -What: /sys/bus/usb/drivers/usbtmc/devices/*/interface_capabilities -What: /sys/bus/usb/drivers/usbtmc/devices/*/device_capabilities +What: /sys/bus/usb/drivers/usbtmc/*/interface_capabilities +What: /sys/bus/usb/drivers/usbtmc/*/device_capabilities Date: August 2008 Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Description: @@ -12,8 +12,8 @@ Description: The files are read only. -What: /sys/bus/usb/drivers/usbtmc/devices/*/usb488_interface_capabilities -What: /sys/bus/usb/drivers/usbtmc/devices/*/usb488_device_capabilities +What: /sys/bus/usb/drivers/usbtmc/*/usb488_interface_capabilities +What: /sys/bus/usb/drivers/usbtmc/*/usb488_device_capabilities Date: August 2008 Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Description: @@ -27,7 +27,7 @@ Description: The files are read only. -What: /sys/bus/usb/drivers/usbtmc/devices/*/TermChar +What: /sys/bus/usb/drivers/usbtmc/*/TermChar Date: August 2008 Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Description: @@ -40,7 +40,7 @@ Description: sent to the device or not. -What: /sys/bus/usb/drivers/usbtmc/devices/*/TermCharEnabled +What: /sys/bus/usb/drivers/usbtmc/*/TermCharEnabled Date: August 2008 Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Description: @@ -51,7 +51,7 @@ Description: published by the USB-IF. -What: /sys/bus/usb/drivers/usbtmc/devices/*/auto_abort +What: /sys/bus/usb/drivers/usbtmc/*/auto_abort Date: August 2008 Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Description: diff --git a/Documentation/ABI/testing/sysfs-block-rssd b/Documentation/ABI/testing/sysfs-block-rssd new file mode 100644 index 00000000000..d535757799f --- /dev/null +++ b/Documentation/ABI/testing/sysfs-block-rssd @@ -0,0 +1,18 @@ +What: /sys/block/rssd*/registers +Date: March 2012 +KernelVersion: 3.3 +Contact: Asai Thambi S P <asamymuthupa@micron.com> +Description: This is a read-only file. Dumps below driver information and + hardware registers. + - S ACTive + - Command Issue + - Allocated + - Completed + - PORT IRQ STAT + - HOST IRQ STAT + +What: /sys/block/rssd*/status +Date: April 2012 +KernelVersion: 3.4 +Contact: Asai Thambi S P <asamymuthupa@micron.com> +Description: This is a read-only file. Indicates the status of the device. diff --git a/Documentation/ABI/testing/sysfs-bus-hsi b/Documentation/ABI/testing/sysfs-bus-hsi new file mode 100644 index 00000000000..1b1b282a99e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-hsi @@ -0,0 +1,19 @@ +What: /sys/bus/hsi +Date: April 2012 +KernelVersion: 3.4 +Contact: Carlos Chinea <carlos.chinea@nokia.com> +Description: + High Speed Synchronous Serial Interface (HSI) is a + serial interface mainly used for connecting application + engines (APE) with cellular modem engines (CMT) in cellular + handsets. + The bus will be populated with devices (hsi_clients) representing + the protocols available in the system. Bus drivers implement + those protocols. + +What: /sys/bus/hsi/devices/.../modalias +Date: April 2012 +KernelVersion: 3.4 +Contact: Carlos Chinea <carlos.chinea@nokia.com> +Description: Stores the same MODALIAS value emitted by uevent + Format: hsi:<hsi_client device name> diff --git a/Documentation/ABI/testing/sysfs-cfq-target-latency b/Documentation/ABI/testing/sysfs-cfq-target-latency new file mode 100644 index 00000000000..df0f7828c5e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-cfq-target-latency @@ -0,0 +1,8 @@ +What: /sys/block/<device>/iosched/target_latency +Date: March 2012 +contact: Tao Ma <boyu.mt@taobao.com> +Description: + The /sys/block/<device>/iosched/target_latency only exists + when the user sets cfq to /sys/block/<device>/scheduler. + It contains an estimated latency time for the cfq. cfq will + use it to calculate the time slice used for every task. diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml index 3fd3ce5df27..5274c24d11e 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml @@ -1,6 +1,6 @@ <refentry id="V4L2-PIX-FMT-NV12M"> <refmeta> - <refentrytitle>V4L2_PIX_FMT_NV12M ('NV12M')</refentrytitle> + <refentrytitle>V4L2_PIX_FMT_NV12M ('NM12')</refentrytitle> &manvol; </refmeta> <refnamediv> diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml index 9957863daf1..60308f1eefd 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml @@ -1,6 +1,6 @@ <refentry id="V4L2-PIX-FMT-YUV420M"> <refmeta> - <refentrytitle>V4L2_PIX_FMT_YUV420M ('YU12M')</refentrytitle> + <refentrytitle>V4L2_PIX_FMT_YUV420M ('YM12')</refentrytitle> &manvol; </refmeta> <refnamediv> diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index 4c95c0034a4..9b1067afb22 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -34,8 +34,7 @@ Current Status: linux-2.6.34-mmotm(development version of 2010/April) Features: - accounting anonymous pages, file caches, swap caches usage and limiting them. - - private LRU and reclaim routine. (system's global LRU and private LRU - work independently from each other) + - pages are linked to per-memcg LRU exclusively, and there is no global LRU. - optionally, memory+swap usage can be accounted and limited. - hierarchical accounting - soft limit @@ -154,7 +153,7 @@ updated. page_cgroup has its own LRU on cgroup. 2.2.1 Accounting details All mapped anon pages (RSS) and cache pages (Page Cache) are accounted. -Some pages which are never reclaimable and will not be on the global LRU +Some pages which are never reclaimable and will not be on the LRU are not accounted. We just account pages under usual VM management. RSS pages are accounted at page_fault unless they've already been accounted diff --git a/Documentation/devicetree/bindings/ata/calxeda-sata.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index 79caa5651f5..8bb8a76d42e 100644 --- a/Documentation/devicetree/bindings/ata/calxeda-sata.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -1,10 +1,10 @@ -* Calxeda SATA Controller +* AHCI SATA Controller SATA nodes are defined to describe on-chip Serial ATA controllers. Each SATA controller should have its own node. Required properties: -- compatible : compatible list, contains "calxeda,hb-ahci" +- compatible : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci" - interrupts : <interrupt mapping for SATA IRQ> - reg : <registers mapping> @@ -14,4 +14,3 @@ Example: reg = <0xffe08000 0x1000>; interrupts = <115>; }; - diff --git a/Documentation/devicetree/bindings/iommu/nvidia,tegra20-gart.txt b/Documentation/devicetree/bindings/iommu/nvidia,tegra20-gart.txt new file mode 100644 index 00000000000..099d9362ebc --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/nvidia,tegra20-gart.txt @@ -0,0 +1,14 @@ +NVIDIA Tegra 20 GART + +Required properties: +- compatible: "nvidia,tegra20-gart" +- reg: Two pairs of cells specifying the physical address and size of + the memory controller registers and the GART aperture respectively. + +Example: + + gart { + compatible = "nvidia,tegra20-gart"; + reg = <0x7000f024 0x00000018 /* controller registers */ + 0x58000000 0x02000000>; /* GART aperture */ + }; diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 2c3cd413f04..9cc44449508 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -3,6 +3,8 @@ Required properties: - compatible : "fsl,sgtl5000". +- reg : the I2C address of the device + Example: codec: sgtl5000@0a { diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 709e08e9a22..e4b57756b9f 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -531,3 +531,21 @@ Why: There appear to be no production users of the get_robust_list syscall, of ASLR. It was only ever intended for debugging, so it should be removed. Who: Kees Cook <keescook@chromium.org> + +---------------------------- + +What: setitimer accepts user NULL pointer (value) +When: 3.6 +Why: setitimer is not returning -EFAULT if user pointer is NULL. This + violates the spec. +Who: Sasikantha Babu <sasikanth.v19@gmail.com> + +---------------------------- + +What: V4L2_CID_HCENTER, V4L2_CID_VCENTER V4L2 controls +When: 3.7 +Why: The V4L2_CID_VCENTER, V4L2_CID_HCENTER controls have been deprecated + for about 4 years and they are not used by any mainline driver. + There are newer controls (V4L2_CID_PAN*, V4L2_CID_TILT*) that provide + similar functionality. +Who: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index e916e3d3648..0d049202808 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -114,7 +114,7 @@ members are defined: struct file_system_type { const char *name; int fs_flags; - struct dentry (*mount) (struct file_system_type *, int, + struct dentry *(*mount) (struct file_system_type *, int, const char *, void *); void (*kill_sb) (struct super_block *); struct module *owner; diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index bd80ba5847d..1619a8c8087 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -147,7 +147,7 @@ tcp_adv_win_scale - INTEGER (if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale), if it is <= 0. Possible values are [-31, 31], inclusive. - Default: 2 + Default: 1 tcp_allowed_congestion_control - STRING Show/set the congestion control choices available to non-privileged @@ -410,7 +410,7 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max net.core.rmem_max. Calling setsockopt() with SO_RCVBUF disables automatic tuning of that socket's receive buffer size, in which case this value is ignored. - Default: between 87380B and 4MB, depending on RAM size. + Default: between 87380B and 6MB, depending on RAM size. tcp_sack - BOOLEAN Enable select acknowledgments (SACKS). diff --git a/Documentation/power/freezing-of-tasks.txt b/Documentation/power/freezing-of-tasks.txt index ec715cd78fb..6ec291ea1c7 100644 --- a/Documentation/power/freezing-of-tasks.txt +++ b/Documentation/power/freezing-of-tasks.txt @@ -9,7 +9,7 @@ architectures). II. How does it work? -There are four per-task flags used for that, PF_NOFREEZE, PF_FROZEN, TIF_FREEZE +There are three per-task flags used for that, PF_NOFREEZE, PF_FROZEN and PF_FREEZER_SKIP (the last one is auxiliary). The tasks that have PF_NOFREEZE unset (all user space processes and some kernel threads) are regarded as 'freezable' and treated in a special way before the system enters a @@ -17,30 +17,31 @@ suspend state as well as before a hibernation image is created (in what follows we only consider hibernation, but the description also applies to suspend). Namely, as the first step of the hibernation procedure the function -freeze_processes() (defined in kernel/power/process.c) is called. It executes -try_to_freeze_tasks() that sets TIF_FREEZE for all of the freezable tasks and -either wakes them up, if they are kernel threads, or sends fake signals to them, -if they are user space processes. A task that has TIF_FREEZE set, should react -to it by calling the function called __refrigerator() (defined in -kernel/freezer.c), which sets the task's PF_FROZEN flag, changes its state -to TASK_UNINTERRUPTIBLE and makes it loop until PF_FROZEN is cleared for it. -Then, we say that the task is 'frozen' and therefore the set of functions -handling this mechanism is referred to as 'the freezer' (these functions are -defined in kernel/power/process.c, kernel/freezer.c & include/linux/freezer.h). -User space processes are generally frozen before kernel threads. +freeze_processes() (defined in kernel/power/process.c) is called. A system-wide +variable system_freezing_cnt (as opposed to a per-task flag) is used to indicate +whether the system is to undergo a freezing operation. And freeze_processes() +sets this variable. After this, it executes try_to_freeze_tasks() that sends a +fake signal to all user space processes, and wakes up all the kernel threads. +All freezable tasks must react to that by calling try_to_freeze(), which +results in a call to __refrigerator() (defined in kernel/freezer.c), which sets +the task's PF_FROZEN flag, changes its state to TASK_UNINTERRUPTIBLE and makes +it loop until PF_FROZEN is cleared for it. Then, we say that the task is +'frozen' and therefore the set of functions handling this mechanism is referred +to as 'the freezer' (these functions are defined in kernel/power/process.c, +kernel/freezer.c & include/linux/freezer.h). User space processes are generally +frozen before kernel threads. __refrigerator() must not be called directly. Instead, use the try_to_freeze() function (defined in include/linux/freezer.h), that checks -the task's TIF_FREEZE flag and makes the task enter __refrigerator() if the -flag is set. +if the task is to be frozen and makes the task enter __refrigerator(). For user space processes try_to_freeze() is called automatically from the signal-handling code, but the freezable kernel threads need to call it explicitly in suitable places or use the wait_event_freezable() or wait_event_freezable_timeout() macros (defined in include/linux/freezer.h) -that combine interruptible sleep with checking if TIF_FREEZE is set and calling -try_to_freeze(). The main loop of a freezable kernel thread may look like the -following one: +that combine interruptible sleep with checking if the task is to be frozen and +calling try_to_freeze(). The main loop of a freezable kernel thread may look +like the following one: set_freezable(); do { @@ -53,7 +54,7 @@ following one: (from drivers/usb/core/hub.c::hub_thread()). If a freezable kernel thread fails to call try_to_freeze() after the freezer has -set TIF_FREEZE for it, the freezing of tasks will fail and the entire +initiated a freezing operation, the freezing of tasks will fail and the entire hibernation operation will be cancelled. For this reason, freezable kernel threads must call try_to_freeze() somewhere or use one of the wait_event_freezable() and wait_event_freezable_timeout() macros. diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt index 78771709142..d389acd31e1 100644 --- a/Documentation/security/keys.txt +++ b/Documentation/security/keys.txt @@ -123,7 +123,7 @@ KEY SERVICE OVERVIEW The key service provides a number of features besides keys: - (*) The key service defines two special key types: + (*) The key service defines three special key types: (+) "keyring" @@ -137,6 +137,18 @@ The key service provides a number of features besides keys: blobs of data. These can be created, updated and read by userspace, and aren't intended for use by kernel services. + (+) "logon" + + Like a "user" key, a "logon" key has a payload that is an arbitrary + blob of data. It is intended as a place to store secrets which are + accessible to the kernel but not to userspace programs. + + The description can be arbitrary, but must be prefixed with a non-zero + length string that describes the key "subclass". The subclass is + separated from the rest of the description by a ':'. "logon" keys can + be created and updated from userspace, but the payload is only + readable from kernel space. + (*) Each process subscribes to three keyrings: a thread-specific keyring, a process-specific keyring, and a session-specific keyring. diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index d97d992ced1..03f7897c641 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -43,7 +43,9 @@ ALC680 ALC882/883/885/888/889 ====================== - N/A + acer-aspire-4930g Acer Aspire 4930G/5930G/6530G/6930G/7730G + acer-aspire-8930g Acer Aspire 8330G/6935G + acer-aspire Acer Aspire others ALC861/660 ========== diff --git a/Documentation/usb/URB.txt b/Documentation/usb/URB.txt index 8ffce746d49..00d2c644068 100644 --- a/Documentation/usb/URB.txt +++ b/Documentation/usb/URB.txt @@ -168,6 +168,28 @@ that if the completion handler or anyone else tries to resubmit it they will get a -EPERM error. Thus you can be sure that when usb_kill_urb() returns, the URB is totally idle. +There is a lifetime issue to consider. An URB may complete at any +time, and the completion handler may free the URB. If this happens +while usb_unlink_urb or usb_kill_urb is running, it will cause a +memory-access violation. The driver is responsible for avoiding this, +which often means some sort of lock will be needed to prevent the URB +from being deallocated while it is still in use. + +On the other hand, since usb_unlink_urb may end up calling the +completion handler, the handler must not take any lock that is held +when usb_unlink_urb is invoked. The general solution to this problem +is to increment the URB's reference count while holding the lock, then +drop the lock and call usb_unlink_urb or usb_kill_urb, and then +decrement the URB's reference count. You increment the reference +count by calling + + struct urb *usb_get_urb(struct urb *urb) + +(ignore the return value; it is the same as the argument) and +decrement the reference count by calling usb_free_urb. Of course, +none of this is necessary if there's no danger of the URB being freed +by the completion handler. + 1.7. What about the completion handler? diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt index 5335fa8b06e..c42bb9cd3b4 100644 --- a/Documentation/usb/usbmon.txt +++ b/Documentation/usb/usbmon.txt @@ -183,10 +183,10 @@ An input control transfer to get a port status. d5ea89a0 3575914555 S Ci:1:001:0 s a3 00 0000 0003 0004 4 < d5ea89a0 3575914560 C Ci:1:001:0 0 4 = 01050000 -An output bulk transfer to send a SCSI command 0x5E in a 31-byte Bulk wrapper -to a storage device at address 5: +An output bulk transfer to send a SCSI command 0x28 (READ_10) in a 31-byte +Bulk wrapper to a storage device at address 5: -dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 5e000000 00000000 00000600 00000000 00000000 00000000 000000 +dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 ad000000 00800000 80010a28 20000000 20000040 00000000 000000 dd65f0e8 4128379808 C Bo:1:005:2 0 31 > * Raw binary format and API |