diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/00-INDEX | 4 | ||||
| -rw-r--r-- | Documentation/SubmittingPatches | 54 | ||||
| -rw-r--r-- | Documentation/filesystems/00-INDEX | 6 | ||||
| -rw-r--r-- | Documentation/filesystems/nfsroot.txt (renamed from Documentation/nfsroot.txt) | 0 | ||||
| -rw-r--r-- | Documentation/filesystems/rpc-cache.txt (renamed from Documentation/rpc-cache.txt) | 0 | ||||
| -rw-r--r-- | Documentation/filesystems/seq_file.txt | 283 | ||||
| -rw-r--r-- | Documentation/hrtimers/highres.txt | 2 | ||||
| -rw-r--r-- | Documentation/kernel-parameters.txt | 10 | ||||
| -rw-r--r-- | Documentation/networking/can.txt | 8 | ||||
| -rw-r--r-- | Documentation/scheduler/00-INDEX | 2 | ||||
| -rw-r--r-- | Documentation/scheduler/sched-rt-group.txt (renamed from Documentation/sched-rt-group.txt) | 0 | ||||
| -rw-r--r-- | Documentation/spi/spi-summary | 15 | ||||
| -rw-r--r-- | Documentation/spinlocks.txt | 22 | ||||
| -rw-r--r-- | Documentation/vm/hugetlbpage.txt | 7 |
14 files changed, 393 insertions, 20 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index fc8e7c7d182..e8fb2467196 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -271,8 +271,6 @@ netlabel/ - directory with information on the NetLabel subsystem. networking/ - directory with info on various aspects of networking with Linux. -nfsroot.txt - - short guide on setting up a diskless box with NFS root filesystem. nmi_watchdog.txt - info on NMI watchdog for SMP systems. nommu-mmap.txt @@ -321,8 +319,6 @@ robust-futexes.txt - a description of what robust futexes are. rocket.txt - info on the Comtrol RocketPort multiport serial driver. -rpc-cache.txt - - introduction to the caching mechanisms in the sunrpc layer. rt-mutex-design.txt - description of the RealTime mutex implementation design. rt-mutex.txt diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 47a539c7642..1fc4e7144dc 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -328,7 +328,7 @@ now, but you can do this to mark internal company procedures or just point out some special detail about the sign-off. -13) When to use Acked-by: +13) When to use Acked-by: and Cc: The Signed-off-by: tag indicates that the signer was involved in the development of the patch, or that he/she was in the patch's delivery path. @@ -349,11 +349,59 @@ Acked-by: does not necessarily indicate acknowledgement of the entire patch. For example, if a patch affects multiple subsystems and has an Acked-by: from one subsystem maintainer then this usually indicates acknowledgement of just the part which affects that maintainer's code. Judgement should be used here. - When in doubt people should refer to the original discussion in the mailing +When in doubt people should refer to the original discussion in the mailing list archives. +If a person has had the opportunity to comment on a patch, but has not +provided such comments, you may optionally add a "Cc:" tag to the patch. +This is the only tag which might be added without an explicit action by the +person it names. This tag documents that potentially interested parties +have been included in the discussion -14) The canonical patch format + +14) Using Test-by: and Reviewed-by: + +A Tested-by: tag indicates that the patch has been successfully tested (in +some environment) by the person named. This tag informs maintainers that +some testing has been performed, provides a means to locate testers for +future patches, and ensures credit for the testers. + +Reviewed-by:, instead, indicates that the patch has been reviewed and found +acceptable according to the Reviewer's Statement: + + Reviewer's statement of oversight + + By offering my Reviewed-by: tag, I state that: + + (a) I have carried out a technical review of this patch to + evaluate its appropriateness and readiness for inclusion into + the mainline kernel. + + (b) Any problems, concerns, or questions relating to the patch + have been communicated back to the submitter. I am satisfied + with the submitter's response to my comments. + + (c) While there may be things that could be improved with this + submission, I believe that it is, at this time, (1) a + worthwhile modification to the kernel, and (2) free of known + issues which would argue against its inclusion. + + (d) While I have reviewed the patch and believe it to be sound, I + do not (unless explicitly stated elsewhere) make any + warranties or guarantees that it will achieve its stated + purpose or function properly in any given situation. + +A Reviewed-by tag is a statement of opinion that the patch is an +appropriate modification of the kernel without any remaining serious +technical issues. Any interested reviewer (who has done the work) can +offer a Reviewed-by tag for a patch. This tag serves to give credit to +reviewers and to inform maintainers of the degree of review which has been +done on the patch. Reviewed-by: tags, when supplied by reviewers known to +understand the subject area and to perform thorough reviews, will normally +increase the liklihood of your patch getting into the kernel. + + +15) The canonical patch format The canonical patch subject line is: diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX index e68021c08fb..52cd611277a 100644 --- a/Documentation/filesystems/00-INDEX +++ b/Documentation/filesystems/00-INDEX @@ -66,6 +66,8 @@ mandatory-locking.txt - info on the Linux implementation of Sys V mandatory file locking. ncpfs.txt - info on Novell Netware(tm) filesystem using NCP protocol. +nfsroot.txt + - short guide on setting up a diskless box with NFS root filesystem. ntfs.txt - info and mount options for the NTFS filesystem (Windows NT). ocfs2.txt @@ -82,6 +84,10 @@ relay.txt - info on relay, for efficient streaming from kernel to user space. romfs.txt - description of the ROMFS filesystem. +rpc-cache.txt + - introduction to the caching mechanisms in the sunrpc layer. +seq_file.txt + - how to use the seq_file API sharedsubtree.txt - a description of shared subtrees for namespaces. smbfs.txt diff --git a/Documentation/nfsroot.txt b/Documentation/filesystems/nfsroot.txt index 31b32917234..31b32917234 100644 --- a/Documentation/nfsroot.txt +++ b/Documentation/filesystems/nfsroot.txt diff --git a/Documentation/rpc-cache.txt b/Documentation/filesystems/rpc-cache.txt index 8a382bea680..8a382bea680 100644 --- a/Documentation/rpc-cache.txt +++ b/Documentation/filesystems/rpc-cache.txt diff --git a/Documentation/filesystems/seq_file.txt b/Documentation/filesystems/seq_file.txt new file mode 100644 index 00000000000..7fb8e6dc62b --- /dev/null +++ b/Documentation/filesystems/seq_file.txt @@ -0,0 +1,283 @@ +The seq_file interface + + Copyright 2003 Jonathan Corbet <corbet@lwn.net> + This file is originally from the LWN.net Driver Porting series at + http://lwn.net/Articles/driver-porting/ + + +There are numerous ways for a device driver (or other kernel component) to +provide information to the user or system administrator. One useful +technique is the creation of virtual files, in debugfs, /proc or elsewhere. +Virtual files can provide human-readable output that is easy to get at +without any special utility programs; they can also make life easier for +script writers. It is not surprising that the use of virtual files has +grown over the years. + +Creating those files correctly has always been a bit of a challenge, +however. It is not that hard to make a virtual file which returns a +string. But life gets trickier if the output is long - anything greater +than an application is likely to read in a single operation. Handling +multiple reads (and seeks) requires careful attention to the reader's +position within the virtual file - that position is, likely as not, in the +middle of a line of output. The kernel has traditionally had a number of +implementations that got this wrong. + +The 2.6 kernel contains a set of functions (implemented by Alexander Viro) +which are designed to make it easy for virtual file creators to get it +right. + +The seq_file interface is available via <linux/seq_file.h>. There are +three aspects to seq_file: + + * An iterator interface which lets a virtual file implementation + step through the objects it is presenting. + + * Some utility functions for formatting objects for output without + needing to worry about things like output buffers. + + * A set of canned file_operations which implement most operations on + the virtual file. + +We'll look at the seq_file interface via an extremely simple example: a +loadable module which creates a file called /proc/sequence. The file, when +read, simply produces a set of increasing integer values, one per line. The +sequence will continue until the user loses patience and finds something +better to do. The file is seekable, in that one can do something like the +following: + + dd if=/proc/sequence of=out1 count=1 + dd if=/proc/sequence skip=1 out=out2 count=1 + +Then concatenate the output files out1 and out2 and get the right +result. Yes, it is a thoroughly useless module, but the point is to show +how the mechanism works without getting lost in other details. (Those +wanting to see the full source for this module can find it at +http://lwn.net/Articles/22359/). + + +The iterator interface + +Modules implementing a virtual file with seq_file must implement a simple +iterator object that allows stepping through the data of interest. +Iterators must be able to move to a specific position - like the file they +implement - but the interpretation of that position is up to the iterator +itself. A seq_file implementation that is formatting firewall rules, for +example, could interpret position N as the Nth rule in the chain. +Positioning can thus be done in whatever way makes the most sense for the +generator of the data, which need not be aware of how a position translates +to an offset in the virtual file. The one obvious exception is that a +position of zero should indicate the beginning of the file. + +The /proc/sequence iterator just uses the count of the next number it +will output as its position. + +Four functions must be implemented to make the iterator work. The first, +called start() takes a position as an argument and returns an iterator +which will start reading at that position. For our simple sequence example, +the start() function looks like: + + static void *ct_seq_start(struct seq_file *s, loff_t *pos) + { + loff_t *spos = kmalloc(sizeof(loff_t), GFP_KERNEL); + if (! spos) + return NULL; + *spos = *pos; + return spos; + } + +The entire data structure for this iterator is a single loff_t value +holding the current position. There is no upper bound for the sequence +iterator, but that will not be the case for most other seq_file +implementations; in most cases the start() function should check for a +"past end of file" condition and return NULL if need be. + +For more complicated applications, the private field of the seq_file +structure can be used. There is also a special value which can be returned +by the start() function called SEQ_START_TOKEN; it can be used if you wish +to instruct your show() function (described below) to print a header at the +top of the output. SEQ_START_TOKEN should only be used if the offset is +zero, however. + +The next function to implement is called, amazingly, next(); its job is to +move the iterator forward to the next position in the sequence. The +example module can simply increment the position by one; more useful +modules will do what is needed to step through some data structure. The +next() function returns a new iterator, or NULL if the sequence is +complete. Here's the example version: + + static void *ct_seq_next(struct seq_file *s, void *v, loff_t *pos) + { + loff_t *spos = v; + *pos = ++*spos; + return spos; + } + +The stop() function is called when iteration is complete; its job, of +course, is to clean up. If dynamic memory is allocated for the iterator, +stop() is the place to free it. + + static void ct_seq_stop(struct seq_file *s, void *v) + { + kfree(v); + } + +Finally, the show() function should format the object currently pointed to +by the iterator for output. It should return zero, or an error code if +something goes wrong. The example module's show() function is: + + static int ct_seq_show(struct seq_file *s, void *v) + { + loff_t *spos = v; + seq_printf(s, "%lld\n", (long long)*spos); + return 0; + } + +We will look at seq_printf() in a moment. But first, the definition of the +seq_file iterator is finished by creating a seq_operations structure with +the four functions we have just defined: + + static const struct seq_operations ct_seq_ops = { + .start = ct_seq_start, + .next = ct_seq_next, + .stop = ct_seq_stop, + .show = ct_seq_show + }; + +This structure will be needed to tie our iterator to the /proc file in +a little bit. + +It's worth noting that the iterator value returned by start() and +manipulated by the other functions is considered to be completely opaque by +the seq_file code. It can thus be anything that is useful in stepping +through the data to be output. Counters can be useful, but it could also be +a direct pointer into an array or linked list. Anything goes, as long as +the programmer is aware that things can happen between calls to the +iterator function. However, the seq_file code (by design) will not sleep +between the calls to start() and stop(), so holding a lock during that time +is a reasonable thing to do. The seq_file code will also avoid taking any +other locks while the iterator is active. + + +Formatted output + +The seq_file code manages positioning within the output created by the +iterator and getting it into the user's buffer. But, for that to work, that +output must be passed to the seq_file code. Some utility functions have +been defined which make this task easy. + +Most code will simply use seq_printf(), which works pretty much like +printk(), but which requires the seq_file pointer as an argument. It is +common to ignore the return value from seq_printf(), but a function +producing complicated output may want to check that value and quit if +something non-zero is returned; an error return means that the seq_file +buffer has been filled and further output will be discarded. + +For straight character output, the following functions may be used: + + int seq_putc(struct seq_file *m, char c); + int seq_puts(struct seq_file *m, const char *s); + int seq_escape(struct seq_file *m, const char *s, const char *esc); + +The first two output a single character and a string, just like one would +expect. seq_escape() is like seq_puts(), except that any character in s +which is in the string esc will be represented in octal form in the output. + +There is also a function for printing filenames: + + int seq_path(struct seq_file *m, struct path *path, char *esc); + +Here, path indicates the file of interest, and esc is a set of characters +which should be escaped in the output. + + +Making it all work + +So far, we have a nice set of functions which can produce output within the +seq_file system, but we have not yet turned them into a file that a user +can see. Creating a file within the kernel requires, of course, the +creation of a set of file_operations which implement the operations on that +file. The seq_file interface provides a set of canned operations which do +most of the work. The virtual file author still must implement the open() +method, however, to hook everything up. The open function is often a single +line, as in the example module: + + static int ct_open(struct inode *inode, struct file *file) + { + return seq_open(file, &ct_seq_ops); + } + +Here, the call to seq_open() takes the seq_operations structure we created +before, and gets set up to iterate through the virtual file. + +On a successful open, seq_open() stores the struct seq_file pointer in +file->private_data. If you have an application where the same iterator can +be used for more than one file, you can store an arbitrary pointer in the +private field of the seq_file structure; that value can then be retrieved +by the iterator functions. + +The other operations of interest - read(), llseek(), and release() - are +all implemented by the seq_file code itself. So a virtual file's +file_operations structure will look like: + + static const struct file_operations ct_file_ops = { + .owner = THIS_MODULE, + .open = ct_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release + }; + +There is also a seq_release_private() which passes the contents of the +seq_file private field to kfree() before releasing the structure. + +The final step is the creation of the /proc file itself. In the example +code, that is done in the initialization code in the usual way: + + static int ct_init(void) + { + struct proc_dir_entry *entry; + + entry = create_proc_entry("sequence", 0, NULL); + if (entry) + entry->proc_fops = &ct_file_ops; + return 0; + } + + module_init(ct_init); + +And that is pretty much it. + + +seq_list + +If your file will be iterating through a linked list, you may find these +routines useful: + + struct list_head *seq_list_start(struct list_head *head, + loff_t pos); + struct list_head *seq_list_start_head(struct list_head *head, + loff_t pos); + struct list_head *seq_list_next(void *v, struct list_head *head, + loff_t *ppos); + +These helpers will interpret pos as a position within the list and iterate +accordingly. Your start() and next() functions need only invoke the +seq_list_* helpers with a pointer to the appropriate list_head structure. + + +The extra-simple version + +For extremely simple virtual files, there is an even easier interface. A +module can define only the show() function, which should create all the +output that the virtual file will contain. The file's open() method then +calls: + + int single_open(struct file *file, + int (*show)(struct seq_file *m, void *p), + void *data); + +When output time comes, the show() function will be called once. The data +value given to single_open() can be found in the private field of the +seq_file structure. When using single_open(), the programmer should use +single_release() instead of seq_release() in the file_operations structure +to avoid a memory leak. diff --git a/Documentation/hrtimers/highres.txt b/Documentation/hrtimers/highres.txt index ce0e9a91e15..a73ecf5b4bd 100644 --- a/Documentation/hrtimers/highres.txt +++ b/Documentation/hrtimers/highres.txt @@ -98,7 +98,7 @@ System-level global event devices are used for the Linux periodic tick. Per-CPU event devices are used to provide local CPU functionality such as process accounting, profiling, and high resolution timers. -The management layer assignes one or more of the folliwing functions to a clock +The management layer assigns one or more of the following functions to a clock event device: - system global periodic tick (jiffies update) - cpu local update_process_times diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 32e9297ef74..5389acf9e07 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -844,7 +844,7 @@ and is between 256 and 4096 characters. It is defined in the file arch/alpha/kernel/core_marvel.c. ip= [IP_PNP] - See Documentation/nfsroot.txt. + See Documentation/filesystems/nfsroot.txt. ip2= [HW] Set IO/IRQ pairs for up to 4 IntelliPort boards See comment before ip2_setup() in @@ -1198,10 +1198,10 @@ and is between 256 and 4096 characters. It is defined in the file file if at all. nfsaddrs= [NFS] - See Documentation/nfsroot.txt. + See Documentation/filesystems/nfsroot.txt. nfsroot= [NFS] nfs root filesystem for disk-less boxes. - See Documentation/nfsroot.txt. + See Documentation/filesystems/nfsroot.txt. nfs.callback_tcpport= [NFS] set the TCP port on which the NFSv4 callback @@ -1339,6 +1339,10 @@ and is between 256 and 4096 characters. It is defined in the file nowb [ARM] + nptcg= [IA64] Override max number of concurrent global TLB + purges which is reported from either PAL_VM_SUMMARY or + SAL PALO. + numa_zonelist_order= [KNL, BOOT] Select zonelist order for NUMA. one of ['zone', 'node', 'default'] can be specified This can be set from sysctl after boot. diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index f1b2de17092..641d2afacff 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -281,10 +281,10 @@ solution for a couple of reasons: sa_family_t can_family; int can_ifindex; union { - struct { canid_t rx_id, tx_id; } tp16; - struct { canid_t rx_id, tx_id; } tp20; - struct { canid_t rx_id, tx_id; } mcnet; - struct { canid_t rx_id, tx_id; } isotp; + /* transport protocol class address info (e.g. ISOTP) */ + struct { canid_t rx_id, tx_id; } tp; + + /* reserved for future CAN protocols address information */ } can_addr; }; diff --git a/Documentation/scheduler/00-INDEX b/Documentation/scheduler/00-INDEX index b5f5ca069b2..fc234d093fb 100644 --- a/Documentation/scheduler/00-INDEX +++ b/Documentation/scheduler/00-INDEX @@ -12,5 +12,7 @@ sched-domains.txt - information on scheduling domains. sched-nice-design.txt - How and why the scheduler's nice levels are implemented. +sched-rt-group.txt + - real-time group scheduling. sched-stats.txt - information on schedstats (Linux Scheduler Statistics). diff --git a/Documentation/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt index 1c6332f4543..1c6332f4543 100644 --- a/Documentation/sched-rt-group.txt +++ b/Documentation/scheduler/sched-rt-group.txt diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index 8861e47e5a2..6d5f18143c5 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -116,6 +116,13 @@ low order bit. So when a chip's timing diagram shows the clock starting low (CPOL=0) and data stabilized for sampling during the trailing clock edge (CPHA=1), that's SPI mode 1. +Note that the clock mode is relevant as soon as the chipselect goes +active. So the master must set the clock to inactive before selecting +a slave, and the slave can tell the chosen polarity by sampling the +clock level when its select line goes active. That's why many devices +support for example both modes 0 and 3: they don't care about polarity, +and alway clock data in/out on rising clock edges. + How do these driver programming interfaces work? ------------------------------------------------ @@ -379,8 +386,14 @@ any more such messages. + when bidirectional reads and writes start ... by how its sequence of spi_transfer requests is arranged; + + which I/O buffers are used ... each spi_transfer wraps a + buffer for each transfer direction, supporting full duplex + (two pointers, maybe the same one in both cases) and half + duplex (one pointer is NULL) transfers; + + optionally defining short delays after transfers ... using - the spi_transfer.delay_usecs setting; + the spi_transfer.delay_usecs setting (this delay can be the + only protocol effect, if the buffer length is zero); + whether the chipselect becomes inactive after a transfer and any delay ... by using the spi_transfer.cs_change flag; diff --git a/Documentation/spinlocks.txt b/Documentation/spinlocks.txt index 471e7538977..619699dde59 100644 --- a/Documentation/spinlocks.txt +++ b/Documentation/spinlocks.txt @@ -5,6 +5,28 @@ Please use DEFINE_SPINLOCK()/DEFINE_RWLOCK() or __SPIN_LOCK_UNLOCKED()/__RW_LOCK_UNLOCKED() as appropriate for static initialization. +Most of the time, you can simply turn: + + static spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED; + +into: + + static DEFINE_SPINLOCK(xxx_lock); + +Static structure member variables go from: + + struct foo bar { + .lock = SPIN_LOCK_UNLOCKED; + }; + +to: + + struct foo bar { + .lock = __SPIN_LOCK_UNLOCKED(bar.lock); + }; + +Declaration of static rw_locks undergo a similar transformation. + Dynamic initialization, when necessary, may be performed as demonstrated below. diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt index f962d01bea2..3102b81bef8 100644 --- a/Documentation/vm/hugetlbpage.txt +++ b/Documentation/vm/hugetlbpage.txt @@ -88,10 +88,9 @@ hugepages from the buddy allocator, if the normal pool is exhausted. As these surplus hugepages go out of use, they are freed back to the buddy allocator. -Caveat: Shrinking the pool via nr_hugepages while a surplus is in effect -will allow the number of surplus huge pages to exceed the overcommit -value, as the pool hugepages (which must have been in use for a surplus -hugepages to be allocated) will become surplus hugepages. As long as +Caveat: Shrinking the pool via nr_hugepages such that it becomes less +than the number of hugepages in use will convert the balance to surplus +huge pages even if it would exceed the overcommit value. As long as this condition holds, however, no more surplus huge pages will be allowed on the system until one of the two sysctls are increased sufficiently, or the surplus huge pages go out of use and are freed. |