diff options
Diffstat (limited to 'Documentation')
26 files changed, 489 insertions, 74 deletions
diff --git a/Documentation/DocBook/media/v4l/dev-codec.xml b/Documentation/DocBook/media/v4l/dev-codec.xml index dca0ecd54dc..ff44c16fc08 100644 --- a/Documentation/DocBook/media/v4l/dev-codec.xml +++ b/Documentation/DocBook/media/v4l/dev-codec.xml @@ -1,18 +1,27 @@ <title>Codec Interface</title> - <note> - <title>Suspended</title> + <para>A V4L2 codec can compress, decompress, transform, or otherwise +convert video data from one format into another format, in memory. Typically +such devices are memory-to-memory devices (i.e. devices with the +<constant>V4L2_CAP_VIDEO_M2M</constant> or <constant>V4L2_CAP_VIDEO_M2M_MPLANE</constant> +capability set). +</para> - <para>This interface has been be suspended from the V4L2 API -implemented in Linux 2.6 until we have more experience with codec -device interfaces.</para> - </note> + <para>A memory-to-memory video node acts just like a normal video node, but it +supports both output (sending frames from memory to the codec hardware) and +capture (receiving the processed frames from the codec hardware into memory) +stream I/O. An application will have to setup the stream +I/O for both sides and finally call &VIDIOC-STREAMON; for both capture and output +to start the codec.</para> - <para>A V4L2 codec can compress, decompress, transform, or otherwise -convert video data from one format into another format, in memory. -Applications send data to be converted to the driver through a -&func-write; call, and receive the converted data through a -&func-read; call. For efficiency a driver may also support streaming -I/O.</para> + <para>Video compression codecs use the MPEG controls to setup their codec parameters +(note that the MPEG controls actually support many more codecs than just MPEG). +See <xref linkend="mpeg-controls"></xref>.</para> - <para>[to do]</para> + <para>Memory-to-memory devices can often be used as a shared resource: you can +open the video node multiple times, each application setting up their own codec properties +that are local to the file handle, and each can use it independently from the others. +The driver will arbitrate access to the codec and reprogram it whenever another file +handler gets access. This is different from the usual video node behavior where the video properties +are global to the device (i.e. changing something through one file handle is visible +through another file handle).</para> diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index bfc93cdcf69..bfe823dd0f3 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -493,7 +493,7 @@ and discussions on the V4L mailing list.</revremark> </partinfo> <title>Video for Linux Two API Specification</title> - <subtitle>Revision 3.9</subtitle> + <subtitle>Revision 3.10</subtitle> <chapter id="common"> &sub-common; diff --git a/Documentation/bcache.txt b/Documentation/bcache.txt index 77db8809bd9..b3a7e7d384f 100644 --- a/Documentation/bcache.txt +++ b/Documentation/bcache.txt @@ -319,7 +319,10 @@ cache<0..n> Symlink to each of the cache devices comprising this cache set. cache_available_percent - Percentage of cache device free. + Percentage of cache device which doesn't contain dirty data, and could + potentially be used for writeback. This doesn't mean this space isn't used + for clean cached data; the unused statistic (in priority_stats) is typically + much lower. clear_stats Clears the statistics associated with this cache @@ -423,8 +426,11 @@ nbuckets Total buckets in this cache priority_stats - Statistics about how recently data in the cache has been accessed. This can - reveal your working set size. + Statistics about how recently data in the cache has been accessed. + This can reveal your working set size. Unused is the percentage of + the cache that doesn't contain any data. Metadata is bcache's + metadata overhead. Average is the average priority of cache buckets. + Next is a list of quantiles with the priority threshold of each. written Sum of all data that has been written to the cache; comparison with diff --git a/Documentation/devices.txt b/Documentation/devices.txt index 08f01e79c41..b9015912bca 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -498,12 +498,8 @@ Your cooperation is appreciated. Each device type has 5 bits (32 minors). - 13 block 8-bit MFM/RLL/IDE controller - 0 = /dev/xda First XT disk whole disk - 64 = /dev/xdb Second XT disk whole disk - - Partitions are handled in the same way as IDE disks - (see major number 3). + 13 block Previously used for the XT disk (/dev/xdN) + Deleted in kernel v3.9. 14 char Open Sound System (OSS) 0 = /dev/mixer Mixer control diff --git a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt b/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt index 3f62adfb3e0..de9f6b78ee5 100644 --- a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt +++ b/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt @@ -2,7 +2,7 @@ Exynos4x12/Exynos5 SoC series camera host interface (FIMC-LITE) Required properties: -- compatible : should be "samsung,exynos4212-fimc" for Exynos4212 and +- compatible : should be "samsung,exynos4212-fimc-lite" for Exynos4212 and Exynos4412 SoCs; - reg : physical base address and size of the device memory mapped registers; diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index 44afa0e5057..4ff65047bb9 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -4,7 +4,7 @@ Required properties: - compatible: Should be "cdns,[<chip>-]{macb|gem}" Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs. Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". - Use "cnds,pc302-gem" for Picochip picoXcell pc302 and later devices based on + Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on the Cadence GEM, or the generic form: "cdns,gem". - reg: Address and length of the register set for the device - interrupts: Should contain macb interrupt diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt index 2a3feabd3b2..34c1505774b 100644 --- a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt @@ -1,7 +1,7 @@ Atmel AT91RM9200 Real Time Clock Required properties: -- compatible: should be: "atmel,at91rm9200-rtc" +- compatible: should be: "atmel,at91rm9200-rtc" or "atmel,at91sam9x5-rtc" - reg: physical base address of the controller and length of memory mapped region. - interrupts: rtc alarm/event interrupt diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt index 589edee3739..589edee3739 100644 --- a/Documentation/devicetree/bindings/drm/exynos/hdmi.txt +++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt b/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt index fa166d94580..fa166d94580 100644 --- a/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt +++ b/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt b/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt index 858f4f9b902..858f4f9b902 100644 --- a/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt +++ b/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt diff --git a/Documentation/devicetree/bindings/drm/exynos/mixer.txt b/Documentation/devicetree/bindings/video/exynos_mixer.txt index 9b2ea034356..9b2ea034356 100644 --- a/Documentation/devicetree/bindings/drm/exynos/mixer.txt +++ b/Documentation/devicetree/bindings/video/exynos_mixer.txt diff --git a/Documentation/devicetree/bindings/video/simple-framebuffer.txt b/Documentation/devicetree/bindings/video/simple-framebuffer.txt new file mode 100644 index 00000000000..3ea46058311 --- /dev/null +++ b/Documentation/devicetree/bindings/video/simple-framebuffer.txt @@ -0,0 +1,25 @@ +Simple Framebuffer + +A simple frame-buffer describes a raw memory region that may be rendered to, +with the assumption that the display hardware has already been set up to scan +out from that buffer. + +Required properties: +- compatible: "simple-framebuffer" +- reg: Should contain the location and size of the framebuffer memory. +- width: The width of the framebuffer in pixels. +- height: The height of the framebuffer in pixels. +- stride: The number of bytes in each line of the framebuffer. +- format: The format of the framebuffer surface. Valid values are: + - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b). + +Example: + + framebuffer { + compatible = "simple-framebuffer"; + reg = <0x1d385000 (1600 * 1200 * 2)>; + width = <1600>; + height = <1200>; + stride = <(1600 * 2)>; + format = "r5g6b5"; + }; diff --git a/Documentation/devicetree/usage-model.txt b/Documentation/devicetree/usage-model.txt index ef9d06c9f8f..0efedaad516 100644 --- a/Documentation/devicetree/usage-model.txt +++ b/Documentation/devicetree/usage-model.txt @@ -191,9 +191,11 @@ Linux it will look something like this: }; The bootargs property contains the kernel arguments, and the initrd-* -properties define the address and size of an initrd blob. The -chosen node may also optionally contain an arbitrary number of -additional properties for platform-specific configuration data. +properties define the address and size of an initrd blob. Note that +initrd-end is the first address after the initrd image, so this doesn't +match the usual semantic of struct resource. The chosen node may also +optionally contain an arbitrary number of additional properties for +platform-specific configuration data. During early boot, the architecture setup code calls of_scan_flat_dt() several times with different helper callbacks to parse device tree diff --git a/Documentation/dmatest.txt b/Documentation/dmatest.txt index 279ac0a8c5b..132a094c7bc 100644 --- a/Documentation/dmatest.txt +++ b/Documentation/dmatest.txt @@ -34,7 +34,7 @@ command: After a while you will start to get messages about current status or error like in the original code. -Note that running a new test will stop any in progress test. +Note that running a new test will not stop any in progress test. The following command should return actual state of the test. % cat /sys/kernel/debug/dmatest/run @@ -52,8 +52,8 @@ To wait for test done the user may perform a busy loop that checks the state. The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be -interrupted or re-run with same or different parameters. For the details see -the above section "Part 2 - When dmatest is built as a module..." +re-run with the same or different parameters. For the details see the above +section "Part 2 - When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running diff --git a/Documentation/filesystems/xfs.txt b/Documentation/filesystems/xfs.txt index 3e4b3dd1e04..83577f0232a 100644 --- a/Documentation/filesystems/xfs.txt +++ b/Documentation/filesystems/xfs.txt @@ -33,6 +33,9 @@ When mounting an XFS filesystem, the following options are accepted. removing extended attributes) the on-disk superblock feature bit field will be updated to reflect this format being in use. + CRC enabled filesystems always use the attr2 format, and so + will reject the noattr2 mount option if it is set. + barrier Enables the use of block layer write barriers for writes into the journal and unwritten extent conversion. This allows for diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c3bfacb9291..2fe6e767b3d 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3005,6 +3005,27 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Force threading of all interrupt handlers except those marked explicitly IRQF_NO_THREAD. + tmem [KNL,XEN] + Enable the Transcendent memory driver if built-in. + + tmem.cleancache=0|1 [KNL, XEN] + Default is on (1). Disable the usage of the cleancache + API to send anonymous pages to the hypervisor. + + tmem.frontswap=0|1 [KNL, XEN] + Default is on (1). Disable the usage of the frontswap + API to send swap pages to the hypervisor. If disabled + the selfballooning and selfshrinking are force disabled. + + tmem.selfballooning=0|1 [KNL, XEN] + Default is on (1). Disable the driving of swap pages + to the hypervisor. + + tmem.selfshrinking=0|1 [KNL, XEN] + Default is on (1). Partial swapoff that immediately + transfers pages from Xen hypervisor back to the + kernel based on different criteria. + topology= [S390] Format: {off | on} Specify if the kernel should make use of the cpu @@ -3330,9 +3351,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. plus one apbt timer for broadcast timer. x86_mrst_timer=apbt_only | lapic_and_apbt - xd= [HW,XT] Original XT pre-IDE (RLL encoded) disks. - xd_geo= See header of drivers/block/xd.c. - xen_emul_unplug= [HW,X86,XEN] Unplug Xen emulated devices Format: [unplug0,][unplug1] diff --git a/Documentation/kernel-per-CPU-kthreads.txt b/Documentation/kernel-per-CPU-kthreads.txt new file mode 100644 index 00000000000..cbf7ae412da --- /dev/null +++ b/Documentation/kernel-per-CPU-kthreads.txt @@ -0,0 +1,202 @@ +REDUCING OS JITTER DUE TO PER-CPU KTHREADS + +This document lists per-CPU kthreads in the Linux kernel and presents +options to control their OS jitter. Note that non-per-CPU kthreads are +not listed here. To reduce OS jitter from non-per-CPU kthreads, bind +them to a "housekeeping" CPU dedicated to such work. + + +REFERENCES + +o Documentation/IRQ-affinity.txt: Binding interrupts to sets of CPUs. + +o Documentation/cgroups: Using cgroups to bind tasks to sets of CPUs. + +o man taskset: Using the taskset command to bind tasks to sets + of CPUs. + +o man sched_setaffinity: Using the sched_setaffinity() system + call to bind tasks to sets of CPUs. + +o /sys/devices/system/cpu/cpuN/online: Control CPU N's hotplug state, + writing "0" to offline and "1" to online. + +o In order to locate kernel-generated OS jitter on CPU N: + + cd /sys/kernel/debug/tracing + echo 1 > max_graph_depth # Increase the "1" for more detail + echo function_graph > current_tracer + # run workload + cat per_cpu/cpuN/trace + + +KTHREADS + +Name: ehca_comp/%u +Purpose: Periodically process Infiniband-related work. +To reduce its OS jitter, do any of the following: +1. Don't use eHCA Infiniband hardware, instead choosing hardware + that does not require per-CPU kthreads. This will prevent these + kthreads from being created in the first place. (This will + work for most people, as this hardware, though important, is + relatively old and is produced in relatively low unit volumes.) +2. Do all eHCA-Infiniband-related work on other CPUs, including + interrupts. +3. Rework the eHCA driver so that its per-CPU kthreads are + provisioned only on selected CPUs. + + +Name: irq/%d-%s +Purpose: Handle threaded interrupts. +To reduce its OS jitter, do the following: +1. Use irq affinity to force the irq threads to execute on + some other CPU. + +Name: kcmtpd_ctr_%d +Purpose: Handle Bluetooth work. +To reduce its OS jitter, do one of the following: +1. Don't use Bluetooth, in which case these kthreads won't be + created in the first place. +2. Use irq affinity to force Bluetooth-related interrupts to + occur on some other CPU and furthermore initiate all + Bluetooth activity on some other CPU. + +Name: ksoftirqd/%u +Purpose: Execute softirq handlers when threaded or when under heavy load. +To reduce its OS jitter, each softirq vector must be handled +separately as follows: +TIMER_SOFTIRQ: Do all of the following: +1. To the extent possible, keep the CPU out of the kernel when it + is non-idle, for example, by avoiding system calls and by forcing + both kernel threads and interrupts to execute elsewhere. +2. Build with CONFIG_HOTPLUG_CPU=y. After boot completes, force + the CPU offline, then bring it back online. This forces + recurring timers to migrate elsewhere. If you are concerned + with multiple CPUs, force them all offline before bringing the + first one back online. Once you have onlined the CPUs in question, + do not offline any other CPUs, because doing so could force the + timer back onto one of the CPUs in question. +NET_TX_SOFTIRQ and NET_RX_SOFTIRQ: Do all of the following: +1. Force networking interrupts onto other CPUs. +2. Initiate any network I/O on other CPUs. +3. Once your application has started, prevent CPU-hotplug operations + from being initiated from tasks that might run on the CPU to + be de-jittered. (It is OK to force this CPU offline and then + bring it back online before you start your application.) +BLOCK_SOFTIRQ: Do all of the following: +1. Force block-device interrupts onto some other CPU. +2. Initiate any block I/O on other CPUs. +3. Once your application has started, prevent CPU-hotplug operations + from being initiated from tasks that might run on the CPU to + be de-jittered. (It is OK to force this CPU offline and then + bring it back online before you start your application.) +BLOCK_IOPOLL_SOFTIRQ: Do all of the following: +1. Force block-device interrupts onto some other CPU. +2. Initiate any block I/O and block-I/O polling on other CPUs. +3. Once your application has started, prevent CPU-hotplug operations + from being initiated from tasks that might run on the CPU to + be de-jittered. (It is OK to force this CPU offline and then + bring it back online before you start your application.) +TASKLET_SOFTIRQ: Do one or more of the following: +1. Avoid use of drivers that use tasklets. (Such drivers will contain + calls to things like tasklet_schedule().) +2. Convert all drivers that you must use from tasklets to workqueues. +3. Force interrupts for drivers using tasklets onto other CPUs, + and also do I/O involving these drivers on other CPUs. +SCHED_SOFTIRQ: Do all of the following: +1. Avoid sending scheduler IPIs to the CPU to be de-jittered, + for example, ensure that at most one runnable kthread is present + on that CPU. If a thread that expects to run on the de-jittered + CPU awakens, the scheduler will send an IPI that can result in + a subsequent SCHED_SOFTIRQ. +2. Build with CONFIG_RCU_NOCB_CPU=y, CONFIG_RCU_NOCB_CPU_ALL=y, + CONFIG_NO_HZ_FULL=y, and, in addition, ensure that the CPU + to be de-jittered is marked as an adaptive-ticks CPU using the + "nohz_full=" boot parameter. This reduces the number of + scheduler-clock interrupts that the de-jittered CPU receives, + minimizing its chances of being selected to do the load balancing + work that runs in SCHED_SOFTIRQ context. +3. To the extent possible, keep the CPU out of the kernel when it + is non-idle, for example, by avoiding system calls and by + forcing both kernel threads and interrupts to execute elsewhere. + This further reduces the number of scheduler-clock interrupts + received by the de-jittered CPU. +HRTIMER_SOFTIRQ: Do all of the following: +1. To the extent possible, keep the CPU out of the kernel when it + is non-idle. For example, avoid system calls and force both + kernel threads and interrupts to execute elsewhere. +2. Build with CONFIG_HOTPLUG_CPU=y. Once boot completes, force the + CPU offline, then bring it back online. This forces recurring + timers to migrate elsewhere. If you are concerned with multiple + CPUs, force them all offline before bringing the first one + back online. Once you have onlined the CPUs in question, do not + offline any other CPUs, because doing so could force the timer + back onto one of the CPUs in question. +RCU_SOFTIRQ: Do at least one of the following: +1. Offload callbacks and keep the CPU in either dyntick-idle or + adaptive-ticks state by doing all of the following: + a. Build with CONFIG_RCU_NOCB_CPU=y, CONFIG_RCU_NOCB_CPU_ALL=y, + CONFIG_NO_HZ_FULL=y, and, in addition ensure that the CPU + to be de-jittered is marked as an adaptive-ticks CPU using + the "nohz_full=" boot parameter. Bind the rcuo kthreads + to housekeeping CPUs, which can tolerate OS jitter. + b. To the extent possible, keep the CPU out of the kernel + when it is non-idle, for example, by avoiding system + calls and by forcing both kernel threads and interrupts + to execute elsewhere. +2. Enable RCU to do its processing remotely via dyntick-idle by + doing all of the following: + a. Build with CONFIG_NO_HZ=y and CONFIG_RCU_FAST_NO_HZ=y. + b. Ensure that the CPU goes idle frequently, allowing other + CPUs to detect that it has passed through an RCU quiescent + state. If the kernel is built with CONFIG_NO_HZ_FULL=y, + userspace execution also allows other CPUs to detect that + the CPU in question has passed through a quiescent state. + c. To the extent possible, keep the CPU out of the kernel + when it is non-idle, for example, by avoiding system + calls and by forcing both kernel threads and interrupts + to execute elsewhere. + +Name: rcuc/%u +Purpose: Execute RCU callbacks in CONFIG_RCU_BOOST=y kernels. +To reduce its OS jitter, do at least one of the following: +1. Build the kernel with CONFIG_PREEMPT=n. This prevents these + kthreads from being created in the first place, and also obviates + the need for RCU priority boosting. This approach is feasible + for workloads that do not require high degrees of responsiveness. +2. Build the kernel with CONFIG_RCU_BOOST=n. This prevents these + kthreads from being created in the first place. This approach + is feasible only if your workload never requires RCU priority + boosting, for example, if you ensure frequent idle time on all + CPUs that might execute within the kernel. +3. Build with CONFIG_RCU_NOCB_CPU=y and CONFIG_RCU_NOCB_CPU_ALL=y, + which offloads all RCU callbacks to kthreads that can be moved + off of CPUs susceptible to OS jitter. This approach prevents the + rcuc/%u kthreads from having any work to do, so that they are + never awakened. +4. Ensure that the CPU never enters the kernel, and, in particular, + avoid initiating any CPU hotplug operations on this CPU. This is + another way of preventing any callbacks from being queued on the + CPU, again preventing the rcuc/%u kthreads from having any work + to do. + +Name: rcuob/%d, rcuop/%d, and rcuos/%d +Purpose: Offload RCU callbacks from the corresponding CPU. +To reduce its OS jitter, do at least one of the following: +1. Use affinity, cgroups, or other mechanism to force these kthreads + to execute on some other CPU. +2. Build with CONFIG_RCU_NOCB_CPUS=n, which will prevent these + kthreads from being created in the first place. However, please + note that this will not eliminate OS jitter, but will instead + shift it to RCU_SOFTIRQ. + +Name: watchdog/%u +Purpose: Detect software lockups on each CPU. +To reduce its OS jitter, do at least one of the following: +1. Build with CONFIG_LOCKUP_DETECTOR=n, which will prevent these + kthreads from being created in the first place. +2. Echo a zero to /proc/sys/kernel/watchdog to disable the + watchdog timer. +3. Echo a large number of /proc/sys/kernel/watchdog_thresh in + order to reduce the frequency of OS jitter due to the watchdog + timer down to a level that is acceptable for your workload. diff --git a/Documentation/m68k/kernel-options.txt b/Documentation/m68k/kernel-options.txt index 97d45f276fe..eaf32a1fd0b 100644 --- a/Documentation/m68k/kernel-options.txt +++ b/Documentation/m68k/kernel-options.txt @@ -80,8 +80,6 @@ Valid names are: /dev/sdd: -> 0x0830 (forth SCSI disk) /dev/sde: -> 0x0840 (fifth SCSI disk) /dev/fd : -> 0x0200 (floppy disk) - /dev/xda: -> 0x0c00 (first XT disk, unused in Linux/m68k) - /dev/xdb: -> 0x0c40 (second XT disk, unused in Linux/m68k) The name must be followed by a decimal number, that stands for the partition number. Internally, the value of the number is just diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index 504dfe4d52e..a66c9821b5c 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -268,7 +268,7 @@ situations. System Power Management Phases ------------------------------ Suspending or resuming the system is done in several phases. Different phases -are used for standby or memory sleep states ("suspend-to-RAM") and the +are used for freeze, standby, and memory sleep states ("suspend-to-RAM") and the hibernation state ("suspend-to-disk"). Each phase involves executing callbacks for every device before the next phase begins. Not all busses or classes support all these callbacks and not all drivers use all the callbacks. The @@ -309,7 +309,8 @@ execute the corresponding method from dev->driver->pm instead if there is one. Entering System Suspend ----------------------- -When the system goes into the standby or memory sleep state, the phases are: +When the system goes into the freeze, standby or memory sleep state, +the phases are: prepare, suspend, suspend_late, suspend_noirq. @@ -368,7 +369,7 @@ the devices that were suspended. Leaving System Suspend ---------------------- -When resuming from standby or memory sleep, the phases are: +When resuming from freeze, standby or memory sleep, the phases are: resume_noirq, resume_early, resume, complete. @@ -433,8 +434,8 @@ the system log. Entering Hibernation -------------------- -Hibernating the system is more complicated than putting it into the standby or -memory sleep state, because it involves creating and saving a system image. +Hibernating the system is more complicated than putting it into the other +sleep states, because it involves creating and saving a system image. Therefore there are more phases for hibernation, with a different set of callbacks. These phases always run after tasks have been frozen and memory has been freed. @@ -485,8 +486,8 @@ image forms an atomic snapshot of the system state. At this point the system image is saved, and the devices then need to be prepared for the upcoming system shutdown. This is much like suspending them -before putting the system into the standby or memory sleep state, and the phases -are similar. +before putting the system into the freeze, standby or memory sleep state, +and the phases are similar. 9. The prepare phase is discussed above. diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.txt index c537834af00..f1f0f59a7c4 100644 --- a/Documentation/power/interface.txt +++ b/Documentation/power/interface.txt @@ -7,8 +7,8 @@ running. The interface exists in /sys/power/ directory (assuming sysfs is mounted at /sys). /sys/power/state controls system power state. Reading from this file -returns what states are supported, which is hard-coded to 'standby' -(Power-On Suspend), 'mem' (Suspend-to-RAM), and 'disk' +returns what states are supported, which is hard-coded to 'freeze', +'standby' (Power-On Suspend), 'mem' (Suspend-to-RAM), and 'disk' (Suspend-to-Disk). Writing to this file one of those strings causes the system to diff --git a/Documentation/power/notifiers.txt b/Documentation/power/notifiers.txt index c2a4a346c0d..a81fa254303 100644 --- a/Documentation/power/notifiers.txt +++ b/Documentation/power/notifiers.txt @@ -15,8 +15,10 @@ A suspend/hibernation notifier may be used for this purpose. The subsystems or drivers having such needs can register suspend notifiers that will be called upon the following events by the PM core: -PM_HIBERNATION_PREPARE The system is going to hibernate or suspend, tasks will - be frozen immediately. +PM_HIBERNATION_PREPARE The system is going to hibernate, tasks will be frozen + immediately. This is different from PM_SUSPEND_PREPARE + below because here we do additional work between notifiers + and drivers freezing. PM_POST_HIBERNATION The system memory state has been restored from a hibernation image or an error occurred during diff --git a/Documentation/power/states.txt b/Documentation/power/states.txt index 4416b28630d..442d43df9b2 100644 --- a/Documentation/power/states.txt +++ b/Documentation/power/states.txt @@ -2,12 +2,26 @@ System Power Management States -The kernel supports three power management states generically, though -each is dependent on platform support code to implement the low-level -details for each state. This file describes each state, what they are +The kernel supports four power management states generically, though +one is generic and the other three are dependent on platform support +code to implement the low-level details for each state. +This file describes each state, what they are commonly called, what ACPI state they map to, and what string to write to /sys/power/state to enter that state +state: Freeze / Low-Power Idle +ACPI state: S0 +String: "freeze" + +This state is a generic, pure software, light-weight, low-power state. +It allows more energy to be saved relative to idle by freezing user +space and putting all I/O devices into low-power states (possibly +lower-power than available at run time), such that the processors can +spend more time in their idle states. +This state can be used for platforms without Standby/Suspend-to-RAM +support, or it can be used in addition to Suspend-to-RAM (memory sleep) +to provide reduced resume latency. + State: Standby / Power-On Suspend ACPI State: S1 @@ -22,9 +36,6 @@ We try to put devices in a low-power state equivalent to D1, which also offers low power savings, but low resume latency. Not all devices support D1, and those that don't are left on. -A transition from Standby to the On state should take about 1-2 -seconds. - State: Suspend-to-RAM ACPI State: S3 @@ -42,9 +53,6 @@ transition back to the On state. For at least ACPI, STR requires some minimal boot-strapping code to resume the system from STR. This may be true on other platforms. -A transition from Suspend-to-RAM to the On state should take about -3-5 seconds. - State: Suspend-to-disk ACPI State: S4 @@ -74,7 +82,3 @@ low-power state (like ACPI S4), or it may simply power down. Powering down offers greater savings, and allows this mechanism to work on any system. However, entering a real low-power state allows the user to trigger wake up events (e.g. pressing a key or opening a laptop lid). - -A transition from Suspend-to-Disk to the On state should take about 30 -seconds, though it's typically a bit more with the current -implementation. diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt index c907be41d60..dc23e58ae26 100644 --- a/Documentation/powerpc/transactional_memory.txt +++ b/Documentation/powerpc/transactional_memory.txt @@ -147,6 +147,25 @@ Example signal handler: fix_the_problem(ucp->dar); } +When in an active transaction that takes a signal, we need to be careful with +the stack. It's possible that the stack has moved back up after the tbegin. +The obvious case here is when the tbegin is called inside a function that +returns before a tend. In this case, the stack is part of the checkpointed +transactional memory state. If we write over this non transactionally or in +suspend, we are in trouble because if we get a tm abort, the program counter and +stack pointer will be back at the tbegin but our in memory stack won't be valid +anymore. + +To avoid this, when taking a signal in an active transaction, we need to use +the stack pointer from the checkpointed state, rather than the speculated +state. This ensures that the signal context (written tm suspended) will be +written below the stack required for the rollback. The transaction is aborted +becuase of the treclaim, so any memory written between the tbegin and the +signal will be rolled back anyway. + +For signals taken in non-TM or suspended mode, we use the +normal/non-checkpointed stack pointer. + Failure cause codes used by kernel ================================== @@ -155,14 +174,18 @@ These are defined in <asm/reg.h>, and distinguish different reasons why the kernel aborted a transaction: TM_CAUSE_RESCHED Thread was rescheduled. + TM_CAUSE_TLBI Software TLB invalide. TM_CAUSE_FAC_UNAV FP/VEC/VSX unavailable trap. TM_CAUSE_SYSCALL Currently unused; future syscalls that must abort transactions for consistency will use this. TM_CAUSE_SIGNAL Signal delivered. TM_CAUSE_MISC Currently unused. + TM_CAUSE_ALIGNMENT Alignment fault. + TM_CAUSE_EMULATE Emulation that touched memory. -These can be checked by the user program's abort handler as TEXASR[0:7]. - +These can be checked by the user program's abort handler as TEXASR[0:7]. If +bit 7 is set, it indicates that the error is consider persistent. For example +a TM_CAUSE_ALIGNMENT will be persistent while a TM_CAUSE_RESCHED will not.q GDB === diff --git a/Documentation/rapidio/rapidio.txt b/Documentation/rapidio/rapidio.txt index c75694b35d0..a9c16c979da 100644 --- a/Documentation/rapidio/rapidio.txt +++ b/Documentation/rapidio/rapidio.txt @@ -79,20 +79,63 @@ master port that is used to communicate with devices within the network. In order to initialize the RapidIO subsystem, a platform must initialize and register at least one master port within the RapidIO network. To register mport within the subsystem controller driver initialization code calls function -rio_register_mport() for each available master port. After all active master -ports are registered with a RapidIO subsystem, the rio_init_mports() routine -is called to perform enumeration and discovery. +rio_register_mport() for each available master port. -In the current PowerPC-based implementation a subsys_initcall() is specified to -perform controller initialization and mport registration. At the end it directly -calls rio_init_mports() to execute RapidIO enumeration and discovery. +RapidIO subsystem uses subsys_initcall() or device_initcall() to perform +controller initialization (depending on controller device type). + +After all active master ports are registered with a RapidIO subsystem, +an enumeration and/or discovery routine may be called automatically or +by user-space command. 4. Enumeration and Discovery ---------------------------- -When rio_init_mports() is called it scans a list of registered master ports and -calls an enumeration or discovery routine depending on the configured role of a -master port: host or agent. +4.1 Overview +------------ + +RapidIO subsystem configuration options allow users to specify enumeration and +discovery methods as statically linked components or loadable modules. +An enumeration/discovery method implementation and available input parameters +define how any given method can be attached to available RapidIO mports: +simply to all available mports OR individually to the specified mport device. + +Depending on selected enumeration/discovery build configuration, there are +several methods to initiate an enumeration and/or discovery process: + + (a) Statically linked enumeration and discovery process can be started + automatically during kernel initialization time using corresponding module + parameters. This was the original method used since introduction of RapidIO + subsystem. Now this method relies on enumerator module parameter which is + 'rio-scan.scan' for existing basic enumeration/discovery method. + When automatic start of enumeration/discovery is used a user has to ensure + that all discovering endpoints are started before the enumerating endpoint + and are waiting for enumeration to be completed. + Configuration option CONFIG_RAPIDIO_DISC_TIMEOUT defines time that discovering + endpoint waits for enumeration to be completed. If the specified timeout + expires the discovery process is terminated without obtaining RapidIO network + information. NOTE: a timed out discovery process may be restarted later using + a user-space command as it is described later if the given endpoint was + enumerated successfully. + + (b) Statically linked enumeration and discovery process can be started by + a command from user space. This initiation method provides more flexibility + for a system startup compared to the option (a) above. After all participating + endpoints have been successfully booted, an enumeration process shall be + started first by issuing a user-space command, after an enumeration is + completed a discovery process can be started on all remaining endpoints. + + (c) Modular enumeration and discovery process can be started by a command from + user space. After an enumeration/discovery module is loaded, a network scan + process can be started by issuing a user-space command. + Similar to the option (b) above, an enumerator has to be started first. + + (d) Modular enumeration and discovery process can be started by a module + initialization routine. In this case an enumerating module shall be loaded + first. + +When a network scan process is started it calls an enumeration or discovery +routine depending on the configured role of a master port: host or agent. Enumeration is performed by a master port if it is configured as a host port by assigning a host device ID greater than or equal to zero. A host device ID is @@ -104,8 +147,58 @@ for it. The enumeration and discovery routines use RapidIO maintenance transactions to access the configuration space of devices. -The enumeration process is implemented according to the enumeration algorithm -outlined in the RapidIO Interconnect Specification: Annex I [1]. +4.2 Automatic Start of Enumeration and Discovery +------------------------------------------------ + +Automatic enumeration/discovery start method is applicable only to built-in +enumeration/discovery RapidIO configuration selection. To enable automatic +enumeration/discovery start by existing basic enumerator method set use boot +command line parameter "rio-scan.scan=1". + +This configuration requires synchronized start of all RapidIO endpoints that +form a network which will be enumerated/discovered. Discovering endpoints have +to be started before an enumeration starts to ensure that all RapidIO +controllers have been initialized and are ready to be discovered. Configuration +parameter CONFIG_RAPIDIO_DISC_TIMEOUT defines time (in seconds) which +a discovering endpoint will wait for enumeration to be completed. + +When automatic enumeration/discovery start is selected, basic method's +initialization routine calls rio_init_mports() to perform enumeration or +discovery for all known mport devices. + +Depending on RapidIO network size and configuration this automatic +enumeration/discovery start method may be difficult to use due to the +requirement for synchronized start of all endpoints. + +4.3 User-space Start of Enumeration and Discovery +------------------------------------------------- + +User-space start of enumeration and discovery can be used with built-in and +modular build configurations. For user-space controlled start RapidIO subsystem +creates the sysfs write-only attribute file '/sys/bus/rapidio/scan'. To initiate +an enumeration or discovery process on specific mport device, a user needs to +write mport_ID (not RapidIO destination ID) into that file. The mport_ID is a +sequential number (0 ... RIO_MAX_MPORTS) assigned during mport device +registration. For example for machine with single RapidIO controller, mport_ID +for that controller always will be 0. + +To initiate RapidIO enumeration/discovery on all available mports a user may +write '-1' (or RIO_MPORT_ANY) into the scan attribute file. + +4.4 Basic Enumeration Method +---------------------------- + +This is an original enumeration/discovery method which is available since +first release of RapidIO subsystem code. The enumeration process is +implemented according to the enumeration algorithm outlined in the RapidIO +Interconnect Specification: Annex I [1]. + +This method can be configured as statically linked or loadable module. +The method's single parameter "scan" allows to trigger the enumeration/discovery +process from module initialization routine. + +This enumeration/discovery method can be started only once and does not support +unloading if it is built as a module. The enumeration process traverses the network using a recursive depth-first algorithm. When a new device is found, the enumerator takes ownership of that @@ -160,6 +253,19 @@ time period. If this wait time period expires before enumeration is completed, an agent skips RapidIO discovery and continues with remaining kernel initialization. +4.5 Adding New Enumeration/Discovery Method +------------------------------------------- + +RapidIO subsystem code organization allows addition of new enumeration/discovery +methods as new configuration options without significant impact to to the core +RapidIO code. + +A new enumeration/discovery method has to be attached to one or more mport +devices before an enumeration/discovery process can be started. Normally, +method's module initialization routine calls rio_register_scan() to attach +an enumerator to a specified mport device (or devices). The basic enumerator +implementation demonstrates this process. + 5. References ------------- diff --git a/Documentation/rapidio/sysfs.txt b/Documentation/rapidio/sysfs.txt index 97f71ce575d..19878179da4 100644 --- a/Documentation/rapidio/sysfs.txt +++ b/Documentation/rapidio/sysfs.txt @@ -88,3 +88,20 @@ that exports additional attributes. IDT_GEN2: errlog - reads contents of device error log until it is empty. + + +5. RapidIO Bus Attributes +------------------------- + +RapidIO bus subdirectory /sys/bus/rapidio implements the following bus-specific +attribute: + + scan - allows to trigger enumeration discovery process from user space. This + is a write-only attribute. To initiate an enumeration or discovery + process on specific mport device, a user needs to write mport_ID (not + RapidIO destination ID) into this file. The mport_ID is a sequential + number (0 ... RIO_MAX_MPORTS) assigned to the mport device. + For example, for a machine with a single RapidIO controller, mport_ID + for that controller always will be 0. + To initiate RapidIO enumeration/discovery on all available mports + a user must write '-1' (or RIO_MPORT_ANY) into this attribute file. diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index bb8b0dc532b..77d68e23b24 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -29,6 +29,8 @@ ALC269/270/275/276/280/282 alc271-dmic Enable ALC271X digital mic workaround inv-dmic Inverted internal mic workaround lenovo-dock Enables docking station I/O for some Lenovos + dell-headset-multi Headset jack, which can also be used as mic-in + dell-headset-dock Headset jack (without mic-in), and also dock I/O ALC662/663/272 ============== @@ -42,6 +44,7 @@ ALC662/663/272 asus-mode7 ASUS asus-mode8 ASUS inv-dmic Inverted internal mic workaround + dell-headset-multi Headset jack, which can also be used as mic-in ALC680 ====== |