diff options
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/ABI/testing/sysfs-bus-usb | 2 | ||||
-rw-r--r-- | Documentation/filesystems/ceph.txt | 139 | ||||
-rw-r--r-- | Documentation/ioctl/ioctl-number.txt | 1 | ||||
-rw-r--r-- | Documentation/kobject.txt | 60 | ||||
-rw-r--r-- | Documentation/networking/stmmac.txt | 143 |
5 files changed, 324 insertions, 21 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index a986e9bbba3..bcebb9eaedc 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -160,7 +160,7 @@ Description: match the driver to the device. For example: # echo "046d c315" > /sys/bus/usb/drivers/foo/remove_id -What: /sys/bus/usb/device/.../avoid_reset +What: /sys/bus/usb/device/.../avoid_reset_quirk Date: December 2009 Contact: Oliver Neukum <oliver@neukum.org> Description: diff --git a/Documentation/filesystems/ceph.txt b/Documentation/filesystems/ceph.txt new file mode 100644 index 00000000000..6e03917316b --- /dev/null +++ b/Documentation/filesystems/ceph.txt @@ -0,0 +1,139 @@ +Ceph Distributed File System +============================ + +Ceph is a distributed network file system designed to provide good +performance, reliability, and scalability. + +Basic features include: + + * POSIX semantics + * Seamless scaling from 1 to many thousands of nodes + * High availability and reliability. No single points of failure. + * N-way replication of data across storage nodes + * Fast recovery from node failures + * Automatic rebalancing of data on node addition/removal + * Easy deployment: most FS components are userspace daemons + +Also, + * Flexible snapshots (on any directory) + * Recursive accounting (nested files, directories, bytes) + +In contrast to cluster filesystems like GFS, OCFS2, and GPFS that rely +on symmetric access by all clients to shared block devices, Ceph +separates data and metadata management into independent server +clusters, similar to Lustre. Unlike Lustre, however, metadata and +storage nodes run entirely as user space daemons. Storage nodes +utilize btrfs to store data objects, leveraging its advanced features +(checksumming, metadata replication, etc.). File data is striped +across storage nodes in large chunks to distribute workload and +facilitate high throughputs. When storage nodes fail, data is +re-replicated in a distributed fashion by the storage nodes themselves +(with some minimal coordination from a cluster monitor), making the +system extremely efficient and scalable. + +Metadata servers effectively form a large, consistent, distributed +in-memory cache above the file namespace that is extremely scalable, +dynamically redistributes metadata in response to workload changes, +and can tolerate arbitrary (well, non-Byzantine) node failures. The +metadata server takes a somewhat unconventional approach to metadata +storage to significantly improve performance for common workloads. In +particular, inodes with only a single link are embedded in +directories, allowing entire directories of dentries and inodes to be +loaded into its cache with a single I/O operation. The contents of +extremely large directories can be fragmented and managed by +independent metadata servers, allowing scalable concurrent access. + +The system offers automatic data rebalancing/migration when scaling +from a small cluster of just a few nodes to many hundreds, without +requiring an administrator carve the data set into static volumes or +go through the tedious process of migrating data between servers. +When the file system approaches full, new nodes can be easily added +and things will "just work." + +Ceph includes flexible snapshot mechanism that allows a user to create +a snapshot on any subdirectory (and its nested contents) in the +system. Snapshot creation and deletion are as simple as 'mkdir +.snap/foo' and 'rmdir .snap/foo'. + +Ceph also provides some recursive accounting on directories for nested +files and bytes. That is, a 'getfattr -d foo' on any directory in the +system will reveal the total number of nested regular files and +subdirectories, and a summation of all nested file sizes. This makes +the identification of large disk space consumers relatively quick, as +no 'du' or similar recursive scan of the file system is required. + + +Mount Syntax +============ + +The basic mount syntax is: + + # mount -t ceph monip[:port][,monip2[:port]...]:/[subdir] mnt + +You only need to specify a single monitor, as the client will get the +full list when it connects. (However, if the monitor you specify +happens to be down, the mount won't succeed.) The port can be left +off if the monitor is using the default. So if the monitor is at +1.2.3.4, + + # mount -t ceph 1.2.3.4:/ /mnt/ceph + +is sufficient. If /sbin/mount.ceph is installed, a hostname can be +used instead of an IP address. + + + +Mount Options +============= + + ip=A.B.C.D[:N] + Specify the IP and/or port the client should bind to locally. + There is normally not much reason to do this. If the IP is not + specified, the client's IP address is determined by looking at the + address it's connection to the monitor originates from. + + wsize=X + Specify the maximum write size in bytes. By default there is no + maximu. Ceph will normally size writes based on the file stripe + size. + + rsize=X + Specify the maximum readahead. + + mount_timeout=X + Specify the timeout value for mount (in seconds), in the case + of a non-responsive Ceph file system. The default is 30 + seconds. + + rbytes + When stat() is called on a directory, set st_size to 'rbytes', + the summation of file sizes over all files nested beneath that + directory. This is the default. + + norbytes + When stat() is called on a directory, set st_size to the + number of entries in that directory. + + nocrc + Disable CRC32C calculation for data writes. If set, the OSD + must rely on TCP's error correction to detect data corruption + in the data payload. + + noasyncreaddir + Disable client's use its local cache to satisfy readdir + requests. (This does not change correctness; the client uses + cached metadata only when a lease or capability ensures it is + valid.) + + +More Information +================ + +For more information on Ceph, see the home page at + http://ceph.newdream.net/ + +The Linux kernel client source tree is available at + git://ceph.newdream.net/linux-ceph-client.git + +and the source for the full system is at + git://ceph.newdream.net/ceph.git diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 35c9b51d20e..dd5806f4fcc 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -291,6 +291,7 @@ Code Seq#(hex) Include File Comments 0x92 00-0F drivers/usb/mon/mon_bin.c 0x93 60-7F linux/auto_fs.h 0x94 all fs/btrfs/ioctl.h +0x97 00-7F fs/ceph/ioctl.h Ceph file system 0x99 00-0F 537-Addinboard driver <mailto:buk@buks.ipn.de> 0xA0 all linux/sdp/sdp.h Industrial Device Project diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt index bdb13817e1e..3ab2472509c 100644 --- a/Documentation/kobject.txt +++ b/Documentation/kobject.txt @@ -59,37 +59,56 @@ nice to have in other objects. The C language does not allow for the direct expression of inheritance, so other techniques - such as structure embedding - must be used. -So, for example, the UIO code has a structure that defines the memory -region associated with a uio device: +(As an aside, for those familiar with the kernel linked list implementation, +this is analogous as to how "list_head" structs are rarely useful on +their own, but are invariably found embedded in the larger objects of +interest.) -struct uio_mem { +So, for example, the UIO code in drivers/uio/uio.c has a structure that +defines the memory region associated with a uio device: + + struct uio_map { struct kobject kobj; - unsigned long addr; - unsigned long size; - int memtype; - void __iomem *internal_addr; -}; + struct uio_mem *mem; + }; -If you have a struct uio_mem structure, finding its embedded kobject is +If you have a struct uio_map structure, finding its embedded kobject is just a matter of using the kobj member. Code that works with kobjects will often have the opposite problem, however: given a struct kobject pointer, what is the pointer to the containing structure? You must avoid tricks (such as assuming that the kobject is at the beginning of the structure) and, instead, use the container_of() macro, found in <linux/kernel.h>: - container_of(pointer, type, member) + container_of(pointer, type, member) + +where: + + * "pointer" is the pointer to the embedded kobject, + * "type" is the type of the containing structure, and + * "member" is the name of the structure field to which "pointer" points. + +The return value from container_of() is a pointer to the corresponding +container type. So, for example, a pointer "kp" to a struct kobject +embedded *within* a struct uio_map could be converted to a pointer to the +*containing* uio_map structure with: + + struct uio_map *u_map = container_of(kp, struct uio_map, kobj); + +For convenience, programmers often define a simple macro for "back-casting" +kobject pointers to the containing type. Exactly this happens in the +earlier drivers/uio/uio.c, as you can see here: + + struct uio_map { + struct kobject kobj; + struct uio_mem *mem; + }; -where pointer is the pointer to the embedded kobject, type is the type of -the containing structure, and member is the name of the structure field to -which pointer points. The return value from container_of() is a pointer to -the given type. So, for example, a pointer "kp" to a struct kobject -embedded within a struct uio_mem could be converted to a pointer to the -containing uio_mem structure with: + #define to_map(map) container_of(map, struct uio_map, kobj) - struct uio_mem *u_mem = container_of(kp, struct uio_mem, kobj); +where the macro argument "map" is a pointer to the struct kobject in +question. That macro is subsequently invoked with: -Programmers often define a simple macro for "back-casting" kobject pointers -to the containing type. + struct uio_map *map = to_map(kobj); Initialization of kobjects @@ -387,4 +406,5 @@ called, and the objects in the former circle release each other. Example code to copy from For a more complete example of using ksets and kobjects properly, see the -sample/kobject/kset-example.c code. +example programs samples/kobject/{kobject-example.c,kset-example.c}, +which will be built as loadable modules if you select CONFIG_SAMPLE_KOBJECT. diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt new file mode 100644 index 00000000000..7ee770b5ef5 --- /dev/null +++ b/Documentation/networking/stmmac.txt @@ -0,0 +1,143 @@ + STMicroelectronics 10/100/1000 Synopsys Ethernet driver + +Copyright (C) 2007-2010 STMicroelectronics Ltd +Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + +This is the driver for the MAC 10/100/1000 on-chip Ethernet controllers +(Synopsys IP blocks); it has been fully tested on STLinux platforms. + +Currently this network device driver is for all STM embedded MAC/GMAC +(7xxx SoCs). + +DWC Ether MAC 10/100/1000 Universal version 3.41a and DWC Ether MAC 10/100 +Universal version 4.0 have been used for developing the first code +implementation. + +Please, for more information also visit: www.stlinux.com + +1) Kernel Configuration +The kernel configuration option is STMMAC_ETH: + Device Drivers ---> Network device support ---> Ethernet (1000 Mbit) ---> + STMicroelectronics 10/100/1000 Ethernet driver (STMMAC_ETH) + +2) Driver parameters list: + debug: message level (0: no output, 16: all); + phyaddr: to manually provide the physical address to the PHY device; + dma_rxsize: DMA rx ring size; + dma_txsize: DMA tx ring size; + buf_sz: DMA buffer size; + tc: control the HW FIFO threshold; + tx_coe: Enable/Disable Tx Checksum Offload engine; + watchdog: transmit timeout (in milliseconds); + flow_ctrl: Flow control ability [on/off]; + pause: Flow Control Pause Time; + tmrate: timer period (only if timer optimisation is configured). + +3) Command line options +Driver parameters can be also passed in command line by using: + stmmaceth=dma_rxsize:128,dma_txsize:512 + +4) Driver information and notes + +4.1) Transmit process +The xmit method is invoked when the kernel needs to transmit a packet; it sets +the descriptors in the ring and informs the DMA engine that there is a packet +ready to be transmitted. +Once the controller has finished transmitting the packet, an interrupt is +triggered; So the driver will be able to release the socket buffers. +By default, the driver sets the NETIF_F_SG bit in the features field of the +net_device structure enabling the scatter/gather feature. + +4.2) Receive process +When one or more packets are received, an interrupt happens. The interrupts +are not queued so the driver has to scan all the descriptors in the ring during +the receive process. +This is based on NAPI so the interrupt handler signals only if there is work to be +done, and it exits. +Then the poll method will be scheduled at some future point. +The incoming packets are stored, by the DMA, in a list of pre-allocated socket +buffers in order to avoid the memcpy (Zero-copy). + +4.3) Timer-Driver Interrupt +Instead of having the device that asynchronously notifies the frame receptions, the +driver configures a timer to generate an interrupt at regular intervals. +Based on the granularity of the timer, the frames that are received by the device +will experience different levels of latency. Some NICs have dedicated timer +device to perform this task. STMMAC can use either the RTC device or the TMU +channel 2 on STLinux platforms. +The timers frequency can be passed to the driver as parameter; when change it, +take care of both hardware capability and network stability/performance impact. +Several performance tests on STM platforms showed this optimisation allows to spare +the CPU while having the maximum throughput. + +4.4) WOL +Wake up on Lan feature through Magic Frame is only supported for the GMAC +core. + +4.5) DMA descriptors +Driver handles both normal and enhanced descriptors. The latter has been only +tested on DWC Ether MAC 10/100/1000 Universal version 3.41a. + +4.6) Ethtool support +Ethtool is supported. Driver statistics and internal errors can be taken using: +ethtool -S ethX command. It is possible to dump registers etc. + +4.7) Jumbo and Segmentation Offloading +Jumbo frames are supported and tested for the GMAC. +The GSO has been also added but it's performed in software. +LRO is not supported. + +4.8) Physical +The driver is compatible with PAL to work with PHY and GPHY devices. + +4.9) Platform information +Several information came from the platform; please refer to the +driver's Header file in include/linux directory. + +struct plat_stmmacenet_data { + int bus_id; + int pbl; + int has_gmac; + void (*fix_mac_speed)(void *priv, unsigned int speed); + void (*bus_setup)(unsigned long ioaddr); +#ifdef CONFIG_STM_DRIVERS + struct stm_pad_config *pad_config; +#endif + void *bsp_priv; +}; + +Where: +- pbl (Programmable Burst Length) is maximum number of + beats to be transferred in one DMA transaction. + GMAC also enables the 4xPBL by default. +- fix_mac_speed and bus_setup are used to configure internal target + registers (on STM platforms); +- has_gmac: GMAC core is on board (get it at run-time in the next step); +- bus_id: bus identifier. + +struct plat_stmmacphy_data { + int bus_id; + int phy_addr; + unsigned int phy_mask; + int interface; + int (*phy_reset)(void *priv); + void *priv; +}; + +Where: +- bus_id: bus identifier; +- phy_addr: physical address used for the attached phy device; + set it to -1 to get it at run-time; +- interface: physical MII interface mode; +- phy_reset: hook to reset HW function. + +TODO: +- Continue to make the driver more generic and suitable for other Synopsys + Ethernet controllers used on other architectures (i.e. ARM). +- 10G controllers are not supported. +- MAC uses Normal descriptors and GMAC uses enhanced ones. + This is a limit that should be reviewed. MAC could want to + use the enhanced structure. +- Checksumming: Rx/Tx csum is done in HW in case of GMAC only. +- Review the timer optimisation code to use an embedded device that seems to be + available in new chip generations. |