diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-umc | 28 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-usb | 43 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-usb_host | 25 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-uwb_rc | 144 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-wusb_cbaf | 100 | ||||
| -rw-r--r-- | Documentation/ia64/xen.txt | 183 | ||||
| -rw-r--r-- | Documentation/usb/WUSB-Design-overview.txt | 448 | ||||
| -rw-r--r-- | Documentation/usb/wusb-cbaf | 139 |
8 files changed, 1110 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-umc b/Documentation/ABI/testing/sysfs-bus-umc new file mode 100644 index 00000000000..948fec41244 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-umc @@ -0,0 +1,28 @@ +What: /sys/bus/umc/ +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + The Wireless Host Controller Interface (WHCI) + specification describes a PCI-based device with + multiple capabilities; the UWB Multi-interface + Controller (UMC). + + The umc bus presents each of the individual + capabilties as a device. + +What: /sys/bus/umc/devices/.../capability_id +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + The ID of this capability, with 0 being the radio + controller capability. + +What: /sys/bus/umc/devices/.../version +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + The specification version this capability's hardware + interface complies with. diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index df6c8a0159f..7772928ee48 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -101,3 +101,46 @@ Description: Users: USB PM tool git://git.moblin.org/users/sarah/usb-pm-tool/ + +What: /sys/bus/usb/device/.../authorized +Date: July 2008 +KernelVersion: 2.6.26 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + Authorized devices are available for use by device + drivers, non-authorized one are not. By default, wired + USB devices are authorized. + + Certified Wireless USB devices are not authorized + initially and should be (by writing 1) after the + device has been authenticated. + +What: /sys/bus/usb/device/.../wusb_cdid +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + For Certified Wireless USB devices only. + + A devices's CDID, as 16 space-separated hex octets. + +What: /sys/bus/usb/device/.../wusb_ck +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + For Certified Wireless USB devices only. + + Write the device's connection key (CK) to start the + authentication of the device. The CK is 16 + space-separated hex octets. + +What: /sys/bus/usb/device/.../wusb_disconnect +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + For Certified Wireless USB devices only. + + Write a 1 to force the device to disconnect + (equivalent to unplugging a wired USB device). diff --git a/Documentation/ABI/testing/sysfs-class-usb_host b/Documentation/ABI/testing/sysfs-class-usb_host new file mode 100644 index 00000000000..46b66ad1f1b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-usb_host @@ -0,0 +1,25 @@ +What: /sys/class/usb_host/usb_hostN/wusb_chid +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + Write the CHID (16 space-separated hex octets) for this host controller. + This starts the host controller, allowing it to accept connection from + WUSB devices. + + Set an all zero CHID to stop the host controller. + +What: /sys/class/usb_host/usb_hostN/wusb_trust_timeout +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + Devices that haven't sent a WUSB packet to the host + within 'wusb_trust_timeout' ms are considered to have + disconnected and are removed. The default value of + 4000 ms is the value required by the WUSB + specification. + + Since this relates to security (specifically, the + lifetime of PTKs and GTKs) it should not be changed + from the default. diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc b/Documentation/ABI/testing/sysfs-class-uwb_rc new file mode 100644 index 00000000000..a0d18dbeb7a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-uwb_rc @@ -0,0 +1,144 @@ +What: /sys/class/uwb_rc +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + Interfaces for WiMedia Ultra Wideband Common Radio + Platform (UWB) radio controllers. + + Familiarity with the ECMA-368 'High Rate Ultra + Wideband MAC and PHY Specification' is assumed. + +What: /sys/class/uwb_rc/beacon_timeout_ms +Date: July 2008 +KernelVersion: 2.6.27 +Description: + If no beacons are received from a device for at least + this time, the device will be considered to have gone + and it will be removed. The default is 3 superframes + (~197 ms) as required by the specification. + +What: /sys/class/uwb_rc/uwbN/ +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + An individual UWB radio controller. + +What: /sys/class/uwb_rc/uwbN/beacon +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + Write: + + <channel> [<bpst offset>] + + to start beaconing on a specific channel, or stop + beaconing if <channel> is -1. Valid channels depends + on the radio controller's supported band groups. + + <bpst offset> may be used to try and join a specific + beacon group if more than one was found during a scan. + +What: /sys/class/uwb_rc/uwbN/scan +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + Write: + + <channel> <type> [<bpst offset>] + + to start (or stop) scanning on a channel. <type> is one of: + 0 - scan + 1 - scan outside BP + 2 - scan while inactive + 3 - scanning disabled + 4 - scan (with start time of <bpst offset>) + +What: /sys/class/uwb_rc/uwbN/mac_address +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + The EUI-48, in colon-separated hex octets, for this + radio controller. A write will change the radio + controller's EUI-48 but only do so while the device is + not beaconing or scanning. + +What: /sys/class/uwb_rc/uwbN/wusbhc +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + A symlink to the device (if any) of the WUSB Host + Controller PAL using this radio controller. + +What: /sys/class/uwb_rc/uwbN/<EUI-48>/ +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + A neighbour UWB device that has either been detected + as part of a scan or is a member of the radio + controllers beacon group. + +What: /sys/class/uwb_rc/uwbN/<EUI-48>/BPST +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + The time (using the radio controllers internal 1 ms + interval superframe timer) of the last beacon from + this device was received. + +What: /sys/class/uwb_rc/uwbN/<EUI-48>/DevAddr +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + The current DevAddr of this device in colon separated + hex octets. + +What: /sys/class/uwb_rc/uwbN/<EUI-48>/EUI_48 +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + + The EUI-48 of this device in colon separated hex + octets. + +What: /sys/class/uwb_rc/uwbN/<EUI-48>/BPST +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + +What: /sys/class/uwb_rc/uwbN/<EUI-48>/IEs +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + The latest IEs included in this device's beacon, in + space separated hex octets with one IE per line. + +What: /sys/class/uwb_rc/uwbN/<EUI-48>/LQE +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + Link Quality Estimate - the Signal to Noise Ratio + (SNR) of all packets received from this device in dB. + This gives an estimate on a suitable PHY rate. Refer + to [ECMA-368] section 13.3 for more details. + +What: /sys/class/uwb_rc/uwbN/<EUI-48>/RSSI +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + Received Signal Strength Indication - the strength of + the received signal in dB. LQE is a more useful + measure of the radio link quality. diff --git a/Documentation/ABI/testing/sysfs-wusb_cbaf b/Documentation/ABI/testing/sysfs-wusb_cbaf new file mode 100644 index 00000000000..a99c5f86a37 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-wusb_cbaf @@ -0,0 +1,100 @@ +What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_* +Date: August 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + Various files for managing Cable Based Association of + (wireless) USB devices. + + The sequence of operations should be: + + 1. Device is plugged in. + + 2. The connection manager (CM) sees a device with CBA capability. + (the wusb_chid etc. files in /sys/devices/blah/OURDEVICE). + + 3. The CM writes the host name, supported band groups, + and the CHID (host ID) into the wusb_host_name, + wusb_host_band_groups and wusb_chid files. These + get sent to the device and the CDID (if any) for + this host is requested. + + 4. The CM can verify that the device's supported band + groups (wusb_device_band_groups) are compatible + with the host. + + 5. The CM reads the wusb_cdid file. + + 6. The CM looks it up its database. + + - If it has a matching CHID,CDID entry, the device + has been authorized before and nothing further + needs to be done. + + - If the CDID is zero (or the CM doesn't find a + matching CDID in its database), the device is + assumed to be not known. The CM may associate + the host with device by: writing a randomly + generated CDID to wusb_cdid and then a random CK + to wusb_ck (this uploads the new CC to the + device). + + CMD may choose to prompt the user before + associating with a new device. + + 7. Device is unplugged. + + References: + [WUSB-AM] Association Models Supplement to the + Certified Wireless Universal Serial Bus + Specification, version 1.0. + +What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_chid +Date: August 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + The CHID of the host formatted as 16 space-separated + hex octets. + + Writes fetches device's supported band groups and the + the CDID for any existing association with this host. + +What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_host_name +Date: August 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + A friendly name for the host as a UTF-8 encoded string. + +What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_host_band_groups +Date: August 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + The band groups supported by the host, in the format + defined in [WUSB-AM]. + +What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_device_band_groups +Date: August 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + The band groups supported by the device, in the format + defined in [WUSB-AM]. + +What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_cdid +Date: August 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + The device's CDID formatted as 16 space-separated hex + octets. + +What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_ck +Date: August 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + Write 16 space-separated random, hex octets to + associate with the device. diff --git a/Documentation/ia64/xen.txt b/Documentation/ia64/xen.txt new file mode 100644 index 00000000000..c61a99f7c8b --- /dev/null +++ b/Documentation/ia64/xen.txt @@ -0,0 +1,183 @@ + Recipe for getting/building/running Xen/ia64 with pv_ops + -------------------------------------------------------- + +This recipe describes how to get xen-ia64 source and build it, +and run domU with pv_ops. + +============ +Requirements +============ + + - python + - mercurial + it (aka "hg") is an open-source source code + management software. See the below. + http://www.selenic.com/mercurial/wiki/ + - git + - bridge-utils + +================================= +Getting and Building Xen and Dom0 +================================= + + My environment is; + Machine : Tiger4 + Domain0 OS : RHEL5 + DomainU OS : RHEL5 + + 1. Download source + # hg clone http://xenbits.xensource.com/ext/ia64/xen-unstable.hg + # cd xen-unstable.hg + # hg clone http://xenbits.xensource.com/ext/ia64/linux-2.6.18-xen.hg + + 2. # make world + + 3. # make install-tools + + 4. copy kernels and xen + # cp xen/xen.gz /boot/efi/efi/redhat/ + # cp build-linux-2.6.18-xen_ia64/vmlinux.gz \ + /boot/efi/efi/redhat/vmlinuz-2.6.18.8-xen + + 5. make initrd for Dom0/DomU + # make -C linux-2.6.18-xen.hg ARCH=ia64 modules_install \ + O=$(/bin/pwd)/build-linux-2.6.18-xen_ia64 + # mkinitrd -f /boot/efi/efi/redhat/initrd-2.6.18.8-xen.img \ + 2.6.18.8-xen --builtin mptspi --builtin mptbase \ + --builtin mptscsih --builtin uhci-hcd --builtin ohci-hcd \ + --builtin ehci-hcd + +================================ +Making a disk image for guest OS +================================ + + 1. make file + # dd if=/dev/zero of=/root/rhel5.img bs=1M seek=4096 count=0 + # mke2fs -F -j /root/rhel5.img + # mount -o loop /root/rhel5.img /mnt + # cp -ax /{dev,var,etc,usr,bin,sbin,lib} /mnt + # mkdir /mnt/{root,proc,sys,home,tmp} + + Note: You may miss some device files. If so, please create them + with mknod. Or you can use tar instead of cp. + + 2. modify DomU's fstab + # vi /mnt/etc/fstab + /dev/xvda1 / ext3 defaults 1 1 + none /dev/pts devpts gid=5,mode=620 0 0 + none /dev/shm tmpfs defaults 0 0 + none /proc proc defaults 0 0 + none /sys sysfs defaults 0 0 + + 3. modify inittab + set runlevel to 3 to avoid X trying to start + # vi /mnt/etc/inittab + id:3:initdefault: + Start a getty on the hvc0 console + X0:2345:respawn:/sbin/mingetty hvc0 + tty1-6 mingetty can be commented out + + 4. add hvc0 into /etc/securetty + # vi /mnt/etc/securetty (add hvc0) + + 5. umount + # umount /mnt + +FYI, virt-manager can also make a disk image for guest OS. +It's GUI tools and easy to make it. + +================== +Boot Xen & Domain0 +================== + + 1. replace elilo + elilo of RHEL5 can boot Xen and Dom0. + If you use old elilo (e.g RHEL4), please download from the below + http://elilo.sourceforge.net/cgi-bin/blosxom + and copy into /boot/efi/efi/redhat/ + # cp elilo-3.6-ia64.efi /boot/efi/efi/redhat/elilo.efi + + 2. modify elilo.conf (like the below) + # vi /boot/efi/efi/redhat/elilo.conf + prompt + timeout=20 + default=xen + relocatable + + image=vmlinuz-2.6.18.8-xen + label=xen + vmm=xen.gz + initrd=initrd-2.6.18.8-xen.img + read-only + append=" -- rhgb root=/dev/sda2" + +The append options before "--" are for xen hypervisor, +the options after "--" are for dom0. + +FYI, your machine may need console options like +"com1=19200,8n1 console=vga,com1". For example, +append="com1=19200,8n1 console=vga,com1 -- rhgb console=tty0 \ +console=ttyS0 root=/dev/sda2" + +===================================== +Getting and Building domU with pv_ops +===================================== + + 1. get pv_ops tree + # git clone http://people.valinux.co.jp/~yamahata/xen-ia64/linux-2.6-xen-ia64.git/ + + 2. git branch (if necessary) + # cd linux-2.6-xen-ia64/ + # git checkout -b your_branch origin/xen-ia64-domu-minimal-2008may19 + (Note: The current branch is xen-ia64-domu-minimal-2008may19. + But you would find the new branch. You can see with + "git branch -r" to get the branch lists. + http://people.valinux.co.jp/~yamahata/xen-ia64/for_eagl/linux-2.6-ia64-pv-ops.git/ + is also available. The tree is based on + git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 test) + + + 3. copy .config for pv_ops of domU + # cp arch/ia64/configs/xen_domu_wip_defconfig .config + + 4. make kernel with pv_ops + # make oldconfig + # make + + 5. install the kernel and initrd + # cp vmlinux.gz /boot/efi/efi/redhat/vmlinuz-2.6-pv_ops-xenU + # make modules_install + # mkinitrd -f /boot/efi/efi/redhat/initrd-2.6-pv_ops-xenU.img \ + 2.6.26-rc3xen-ia64-08941-g1b12161 --builtin mptspi \ + --builtin mptbase --builtin mptscsih --builtin uhci-hcd \ + --builtin ohci-hcd --builtin ehci-hcd + +======================== +Boot DomainU with pv_ops +======================== + + 1. make config of DomU + # vi /etc/xen/rhel5 + kernel = "/boot/efi/efi/redhat/vmlinuz-2.6-pv_ops-xenU" + ramdisk = "/boot/efi/efi/redhat/initrd-2.6-pv_ops-xenU.img" + vcpus = 1 + memory = 512 + name = "rhel5" + disk = [ 'file:/root/rhel5.img,xvda1,w' ] + root = "/dev/xvda1 ro" + extra= "rhgb console=hvc0" + + 2. After boot xen and dom0, start xend + # /etc/init.d/xend start + ( In the debugging case, # XEND_DEBUG=1 xend trace_start ) + + 3. start domU + # xm create -c rhel5 + +========= +Reference +========= +- Wiki of Xen/IA64 upstream merge + http://wiki.xensource.com/xenwiki/XenIA64/UpstreamMerge + +Written by Akio Takebe <takebe_akio@jp.fujitsu.com> on 28 May 2008 diff --git a/Documentation/usb/WUSB-Design-overview.txt b/Documentation/usb/WUSB-Design-overview.txt new file mode 100644 index 00000000000..4c3d62c7843 --- /dev/null +++ b/Documentation/usb/WUSB-Design-overview.txt @@ -0,0 +1,448 @@ + +Linux UWB + Wireless USB + WiNET + + (C) 2005-2006 Intel Corporation + Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License version + 2 as published by the Free Software Foundation. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. + + +Please visit http://bughost.org/thewiki/Design-overview.txt-1.8 for +updated content. + + * Design-overview.txt-1.8 + +This code implements a Ultra Wide Band stack for Linux, as well as +drivers for the the USB based UWB radio controllers defined in the +Wireless USB 1.0 specification (including Wireless USB host controller +and an Intel WiNET controller). + + 1. Introduction + 1. HWA: Host Wire adapters, your Wireless USB dongle + + 2. DWA: Device Wired Adaptor, a Wireless USB hub for wired + devices + 3. WHCI: Wireless Host Controller Interface, the PCI WUSB host + adapter + 2. The UWB stack + 1. Devices and hosts: the basic structure + + 2. Host Controller life cycle + + 3. On the air: beacons and enumerating the radio neighborhood + + 4. Device lists + 5. Bandwidth allocation + + 3. Wireless USB Host Controller drivers + + 4. Glossary + + + Introduction + +UWB is a wide-band communication protocol that is to serve also as the +low-level protocol for others (much like TCP sits on IP). Currently +these others are Wireless USB and TCP/IP, but seems Bluetooth and +Firewire/1394 are coming along. + +UWB uses a band from roughly 3 to 10 GHz, transmitting at a max of +~-41dB (or 0.074 uW/MHz--geography specific data is still being +negotiated w/ regulators, so watch for changes). That band is divided in +a bunch of ~1.5 GHz wide channels (or band groups) composed of three +subbands/subchannels (528 MHz each). Each channel is independent of each +other, so you could consider them different "busses". Initially this +driver considers them all a single one. + +Radio time is divided in 65536 us long /superframes/, each one divided +in 256 256us long /MASs/ (Media Allocation Slots), which are the basic +time/media allocation units for transferring data. At the beginning of +each superframe there is a Beacon Period (BP), where every device +transmit its beacon on a single MAS. The length of the BP depends on how +many devices are present and the length of their beacons. + +Devices have a MAC (fixed, 48 bit address) and a device (changeable, 16 +bit address) and send periodic beacons to advertise themselves and pass +info on what they are and do. They advertise their capabilities and a +bunch of other stuff. + +The different logical parts of this driver are: + + * + + *UWB*: the Ultra-Wide-Band stack -- manages the radio and + associated spectrum to allow for devices sharing it. Allows to + control bandwidth assingment, beaconing, scanning, etc + + * + + *WUSB*: the layer that sits on top of UWB to provide Wireless USB. + The Wireless USB spec defines means to control a UWB radio and to + do the actual WUSB. + + + HWA: Host Wire adapters, your Wireless USB dongle + +WUSB also defines a device called a Host Wire Adaptor (HWA), which in +mere terms is a USB dongle that enables your PC to have UWB and Wireless +USB. The Wireless USB Host Controller in a HWA looks to the host like a +[Wireless] USB controller connected via USB (!) + +The HWA itself is broken in two or three main interfaces: + + * + + *RC*: Radio control -- this implements an interface to the + Ultra-Wide-Band radio controller. The driver for this implements a + USB-based UWB Radio Controller to the UWB stack. + + * + + *HC*: the wireless USB host controller. It looks like a USB host + whose root port is the radio and the WUSB devices connect to it. + To the system it looks like a separate USB host. The driver (will) + implement a USB host controller (similar to UHCI, OHCI or EHCI) + for which the root hub is the radio...To reiterate: it is a USB + controller that is connected via USB instead of PCI. + + * + + *WINET*: some HW provide a WiNET interface (IP over UWB). This + package provides a driver for it (it looks like a network + interface, winetX). The driver detects when there is a link up for + their type and kick into gear. + + + DWA: Device Wired Adaptor, a Wireless USB hub for wired devices + +These are the complement to HWAs. They are a USB host for connecting +wired devices, but it is connected to your PC connected via Wireless +USB. To the system it looks like yet another USB host. To the untrained +eye, it looks like a hub that connects upstream wirelessly. + +We still offer no support for this; however, it should share a lot of +code with the HWA-RC driver; there is a bunch of factorization work that +has been done to support that in upcoming releases. + + + WHCI: Wireless Host Controller Interface, the PCI WUSB host adapter + +This is your usual PCI device that implements WHCI. Similar in concept +to EHCI, it allows your wireless USB devices (including DWAs) to connect +to your host via a PCI interface. As in the case of the HWA, it has a +Radio Control interface and the WUSB Host Controller interface per se. + +There is still no driver support for this, but will be in upcoming +releases. + + + The UWB stack + +The main mission of the UWB stack is to keep a tally of which devices +are in radio proximity to allow drivers to connect to them. As well, it +provides an API for controlling the local radio controllers (RCs from +now on), such as to start/stop beaconing, scan, allocate bandwidth, etc. + + + Devices and hosts: the basic structure + +The main building block here is the UWB device (struct uwb_dev). For +each device that pops up in radio presence (ie: the UWB host receives a +beacon from it) you get a struct uwb_dev that will show up in +/sys/class/uwb and in /sys/bus/uwb/devices. + +For each RC that is detected, a new struct uwb_rc is created. In turn, a +RC is also a device, so they also show in /sys/class/uwb and +/sys/bus/uwb/devices, but at the same time, only radio controllers show +up in /sys/class/uwb_rc. + + * + + [*] The reason for RCs being also devices is that not only we can + see them while enumerating the system device tree, but also on the + radio (their beacons and stuff), so the handling has to be + likewise to that of a device. + +Each RC driver is implemented by a separate driver that plugs into the +interface that the UWB stack provides through a struct uwb_rc_ops. The +spec creators have been nice enough to make the message format the same +for HWA and WHCI RCs, so the driver is really a very thin transport that +moves the requests from the UWB API to the device [/uwb_rc_ops->cmd()/] +and sends the replies and notifications back to the API +[/uwb_rc_neh_grok()/]. Notifications are handled to the UWB daemon, that +is chartered, among other things, to keep the tab of how the UWB radio +neighborhood looks, creating and destroying devices as they show up or +dissapear. + +Command execution is very simple: a command block is sent and a event +block or reply is expected back. For sending/receiving command/events, a +handle called /neh/ (Notification/Event Handle) is opened with +/uwb_rc_neh_open()/. + +The HWA-RC (USB dongle) driver (drivers/uwb/hwa-rc.c) does this job for +the USB connected HWA. Eventually, drivers/whci-rc.c will do the same +for the PCI connected WHCI controller. + + + Host Controller life cycle + +So let's say we connect a dongle to the system: it is detected and +firmware uploaded if needed [for Intel's i1480 +/drivers/uwb/ptc/usb.c:ptc_usb_probe()/] and then it is reenumerated. +Now we have a real HWA device connected and +/drivers/uwb/hwa-rc.c:hwarc_probe()/ picks it up, that will set up the +Wire-Adaptor environment and then suck it into the UWB stack's vision of +the world [/drivers/uwb/lc-rc.c:uwb_rc_add()/]. + + * + + [*] The stack should put a new RC to scan for devices + [/uwb_rc_scan()/] so it finds what's available around and tries to + connect to them, but this is policy stuff and should be driven + from user space. As of now, the operator is expected to do it + manually; see the release notes for documentation on the procedure. + +When a dongle is disconnected, /drivers/uwb/hwa-rc.c:hwarc_disconnect()/ +takes time of tearing everything down safely (or not...). + + + On the air: beacons and enumerating the radio neighborhood + +So assuming we have devices and we have agreed for a channel to connect +on (let's say 9), we put the new RC to beacon: + + * + + $ echo 9 0 > /sys/class/uwb_rc/uwb0/beacon + +Now it is visible. If there were other devices in the same radio channel +and beacon group (that's what the zero is for), the dongle's radio +control interface will send beacon notifications on its +notification/event endpoint (NEEP). The beacon notifications are part of +the event stream that is funneled into the API with +/drivers/uwb/neh.c:uwb_rc_neh_grok()/ and delivered to the UWBD, the UWB +daemon through a notification list. + +UWBD wakes up and scans the event list; finds a beacon and adds it to +the BEACON CACHE (/uwb_beca/). If he receives a number of beacons from +the same device, he considers it to be 'onair' and creates a new device +[/drivers/uwb/lc-dev.c:uwbd_dev_onair()/]. Similarly, when no beacons +are received in some time, the device is considered gone and wiped out +[uwbd calls periodically /uwb/beacon.c:uwb_beca_purge()/ that will purge +the beacon cache of dead devices]. + + + Device lists + +All UWB devices are kept in the list of the struct bus_type uwb_bus. + + + Bandwidth allocation + +The UWB stack maintains a local copy of DRP availability through +processing of incoming *DRP Availability Change* notifications. This +local copy is currently used to present the current bandwidth +availability to the user through the sysfs file +/sys/class/uwb_rc/uwbx/bw_avail. In the future the bandwidth +availability information will be used by the bandwidth reservation +routines. + +The bandwidth reservation routines are in progress and are thus not +present in the current release. When completed they will enable a user +to initiate DRP reservation requests through interaction with sysfs. DRP +reservation requests from remote UWB devices will also be handled. The +bandwidth management done by the UWB stack will include callbacks to the +higher layers will enable the higher layers to use the reservations upon +completion. [Note: The bandwidth reservation work is in progress and +subject to change.] + + + Wireless USB Host Controller drivers + +*WARNING* This section needs a lot of work! + +As explained above, there are three different types of HCs in the WUSB +world: HWA-HC, DWA-HC and WHCI-HC. + +HWA-HC and DWA-HC share that they are Wire-Adapters (USB or WUSB +connected controllers), and their transfer management system is almost +identical. So is their notification delivery system. + +HWA-HC and WHCI-HC share that they are both WUSB host controllers, so +they have to deal with WUSB device life cycle and maintenance, wireless +root-hub + +HWA exposes a Host Controller interface (HWA-HC 0xe0/02/02). This has +three endpoints (Notifications, Data Transfer In and Data Transfer +Out--known as NEP, DTI and DTO in the code). + +We reserve UWB bandwidth for our Wireless USB Cluster, create a Cluster +ID and tell the HC to use all that. Then we start it. This means the HC +starts sending MMCs. + + * + + The MMCs are blocks of data defined somewhere in the WUSB1.0 spec + that define a stream in the UWB channel time allocated for sending + WUSB IEs (host to device commands/notifications) and Device + Notifications (device initiated to host). Each host defines a + unique Wireless USB cluster through MMCs. Devices can connect to a + single cluster at the time. The IEs are Information Elements, and + among them are the bandwidth allocations that tell each device + when can they transmit or receive. + +Now it all depends on external stimuli. + +*New device connection* + +A new device pops up, it scans the radio looking for MMCs that give out +the existence of Wireless USB channels. Once one (or more) are found, +selects which one to connect to. Sends a /DN_Connect/ (device +notification connect) during the DNTS (Device Notification Time +Slot--announced in the MMCs + +HC picks the /DN_Connect/ out (nep module sends to notif.c for delivery +into /devconnect/). This process starts the authentication process for +the device. First we allocate a /fake port/ and assign an +unauthenticated address (128 to 255--what we really do is +0x80 | fake_port_idx). We fiddle with the fake port status and /khubd/ +sees a new connection, so he moves on to enable the fake port with a reset. + +So now we are in the reset path -- we know we have a non-yet enumerated +device with an unauthorized address; we ask user space to authenticate +(FIXME: not yet done, similar to bluetooth pairing), then we do the key +exchange (FIXME: not yet done) and issue a /set address 0/ to bring the +device to the default state. Device is authenticated. + +From here, the USB stack takes control through the usb_hcd ops. khubd +has seen the port status changes, as we have been toggling them. It will +start enumerating and doing transfers through usb_hcd->urb_enqueue() to +read descriptors and move our data. + +*Device life cycle and keep alives* + +Everytime there is a succesful transfer to/from a device, we update a +per-device activity timestamp. If not, every now and then we check and +if the activity timestamp gets old, we ping the device by sending it a +Keep Alive IE; it responds with a /DN_Alive/ pong during the DNTS (this +arrives to us as a notification through +devconnect.c:wusb_handle_dn_alive(). If a device times out, we +disconnect it from the system (cleaning up internal information and +toggling the bits in the fake hub port, which kicks khubd into removing +the rest of the stuff). + +This is done through devconnect:__wusb_check_devs(), which will scan the +device list looking for whom needs refreshing. + +If the device wants to disconnect, it will either die (ugly) or send a +/DN_Disconnect/ that will prompt a disconnection from the system. + +*Sending and receiving data* + +Data is sent and received through /Remote Pipes/ (rpipes). An rpipe is +/aimed/ at an endpoint in a WUSB device. This is the same for HWAs and +DWAs. + +Each HC has a number of rpipes and buffers that can be assigned to them; +when doing a data transfer (xfer), first the rpipe has to be aimed and +prepared (buffers assigned), then we can start queueing requests for +data in or out. + +Data buffers have to be segmented out before sending--so we send first a +header (segment request) and then if there is any data, a data buffer +immediately after to the DTI interface (yep, even the request). If our +buffer is bigger than the max segment size, then we just do multiple +requests. + +[This sucks, because doing USB scatter gatter in Linux is resource +intensive, if any...not that the current approach is not. It just has to +be cleaned up a lot :)]. + +If reading, we don't send data buffers, just the segment headers saying +we want to read segments. + +When the xfer is executed, we receive a notification that says data is +ready in the DTI endpoint (handled through +xfer.c:wa_handle_notif_xfer()). In there we read from the DTI endpoint a +descriptor that gives us the status of the transfer, its identification +(given when we issued it) and the segment number. If it was a data read, +we issue another URB to read into the destination buffer the chunk of +data coming out of the remote endpoint. Done, wait for the next guy. The +callbacks for the URBs issued from here are the ones that will declare +the xfer complete at some point and call it's callback. + +Seems simple, but the implementation is not trivial. + + * + + *WARNING* Old!! + +The main xfer descriptor, wa_xfer (equivalent to a URB) contains an +array of segments, tallys on segments and buffers and callback +information. Buried in there is a lot of URBs for executing the segments +and buffer transfers. + +For OUT xfers, there is an array of segments, one URB for each, another +one of buffer URB. When submitting, we submit URBs for segment request +1, buffer 1, segment 2, buffer 2...etc. Then we wait on the DTI for xfer +result data; when all the segments are complete, we call the callback to +finalize the transfer. + +For IN xfers, we only issue URBs for the segments we want to read and +then wait for the xfer result data. + +*URB mapping into xfers* + +This is done by hwahc_op_urb_[en|de]queue(). In enqueue() we aim an +rpipe to the endpoint where we have to transmit, create a transfer +context (wa_xfer) and submit it. When the xfer is done, our callback is +called and we assign the status bits and release the xfer resources. + +In dequeue() we are basically cancelling/aborting the transfer. We issue +a xfer abort request to the HC, cancell all the URBs we had submitted +and not yet done and when all that is done, the xfer callback will be +called--this will call the URB callback. + + + Glossary + +*DWA* -- Device Wire Adapter + +USB host, wired for downstream devices, upstream connects wirelessly +with Wireless USB. + +*EVENT* -- Response to a command on the NEEP + +*HWA* -- Host Wire Adapter / USB dongle for UWB and Wireless USB + +*NEH* -- Notification/Event Handle + +Handle/file descriptor for receiving notifications or events. The WA +code requires you to get one of this to listen for notifications or +events on the NEEP. + +*NEEP* -- Notification/Event EndPoint + +Stuff related to the management of the first endpoint of a HWA USB +dongle that is used to deliver an stream of events and notifications to +the host. + +*NOTIFICATION* -- Message coming in the NEEP as response to something. + +*RC* -- Radio Control + +Design-overview.txt-1.8 (last edited 2006-11-04 12:22:24 by +InakyPerezGonzalez) + diff --git a/Documentation/usb/wusb-cbaf b/Documentation/usb/wusb-cbaf new file mode 100644 index 00000000000..2e78b70f3ad --- /dev/null +++ b/Documentation/usb/wusb-cbaf @@ -0,0 +1,139 @@ +#! /bin/bash +# + +set -e + +progname=$(basename $0) +function help +{ + cat <<EOF +Usage: $progname COMMAND DEVICEs [ARGS] + +Command for manipulating the pairing/authentication credentials of a +Wireless USB device that supports wired-mode Cable-Based-Association. + +Works in conjunction with the wusb-cba.ko driver from http://linuxuwb.org. + + +DEVICE + + sysfs path to the device to authenticate; for example, both this + guys are the same: + + /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4:1.1 + /sys/bus/usb/drivers/wusb-cbaf/1-4.4:1.1 + +COMMAND/ARGS are + + start + + Start a WUSB host controller (by setting up a CHID) + + set-chid DEVICE HOST-CHID HOST-BANDGROUP HOST-NAME + + Sets host information in the device; after this you can call the + get-cdid to see how does this device report itself to us. + + get-cdid DEVICE + + Get the device ID associated to the HOST-CHDI we sent with + 'set-chid'. We might not know about it. + + set-cc DEVICE + + If we allow the device to connect, set a random new CDID and CK + (connection key). Device saves them for the next time it wants to + connect wireless. We save them for that next time also so we can + authenticate the device (when we see the CDID he uses to id + itself) and the CK to crypto talk to it. + +CHID is always 16 hex bytes in 'XX YY ZZ...' form +BANDGROUP is almost always 0001 + +Examples: + + You can default most arguments to '' to get a sane value: + + $ $progname set-chid '' '' '' "My host name" + + A full sequence: + + $ $progname set-chid '' '' '' "My host name" + $ $progname get-cdid '' + $ $progname set-cc '' + +EOF +} + + +# Defaults +# FIXME: CHID should come from a database :), band group from the host +host_CHID="00 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff" +host_band_group="0001" +host_name=$(hostname) + +devs="$(echo /sys/bus/usb/drivers/wusb-cbaf/[0-9]*)" +hdevs="$(for h in /sys/class/uwb_rc/*/wusbhc; do readlink -f $h; done)" + +result=0 +case $1 in + start) + for dev in ${2:-$hdevs} + do + uwb_rc=$(readlink -f $dev/uwb_rc) + if cat $uwb_rc/beacon | grep -q -- "-1" + then + echo 13 0 > $uwb_rc/beacon + echo I: started beaconing on ch 13 on $(basename $uwb_rc) >&2 + fi + echo $host_CHID > $dev/wusb_chid + echo I: started host $(basename $dev) >&2 + done + ;; + stop) + for dev in ${2:-$hdevs} + do + echo 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > $dev/wusb_chid + echo I: stopped host $(basename $dev) >&2 + uwb_rc=$(readlink -f $dev/uwb_rc) + echo -1 | cat > $uwb_rc/beacon + echo I: stopped beaconing on $(basename $uwb_rc) >&2 + done + ;; + set-chid) + shift + for dev in ${2:-$devs}; do + echo "${4:-$host_name}" > $dev/wusb_host_name + echo "${3:-$host_band_group}" > $dev/wusb_host_band_groups + echo ${2:-$host_CHID} > $dev/wusb_chid + done + ;; + get-cdid) + for dev in ${2:-$devs} + do + cat $dev/wusb_cdid + done + ;; + set-cc) + for dev in ${2:-$devs}; do + shift + CDID="$(head --bytes=16 /dev/urandom | od -tx1 -An)" + CK="$(head --bytes=16 /dev/urandom | od -tx1 -An)" + echo "$CDID" > $dev/wusb_cdid + echo "$CK" > $dev/wusb_ck + + echo I: CC set >&2 + echo "CHID: $(cat $dev/wusb_chid)" + echo "CDID:$CDID" + echo "CK: $CK" + done + ;; + help|h|--help|-h) + help + ;; + *) + echo "E: Unknown usage" 1>&2 + help 1>&2 + result=1 +esac +exit $result |