diff options
Diffstat (limited to 'Documentation')
23 files changed, 326 insertions, 93 deletions
diff --git a/Documentation/ABI/obsolete/proc-pid-oom_adj b/Documentation/ABI/obsolete/proc-pid-oom_adj new file mode 100644 index 00000000000..cf63f264ce0 --- /dev/null +++ b/Documentation/ABI/obsolete/proc-pid-oom_adj @@ -0,0 +1,22 @@ +What: /proc/<pid>/oom_adj +When: August 2012 +Why: /proc/<pid>/oom_adj allows userspace to influence the oom killer's + badness heuristic used to determine which task to kill when the kernel + is out of memory. + + The badness heuristic has since been rewritten since the introduction of + this tunable such that its meaning is deprecated. The value was + implemented as a bitshift on a score generated by the badness() + function that did not have any precise units of measure. With the + rewrite, the score is given as a proportion of available memory to the + task allocating pages, so using a bitshift which grows the score + exponentially is, thus, impossible to tune with fine granularity. + + A much more powerful interface, /proc/<pid>/oom_score_adj, was + introduced with the oom killer rewrite that allows users to increase or + decrease the badness() score linearly. This interface will replace + /proc/<pid>/oom_adj. + + A warning will be emitted to the kernel log if an application uses this + deprecated interface. After it is printed once, future warnings will be + suppressed until the kernel is rebooted. diff --git a/Documentation/DocBook/sh.tmpl b/Documentation/DocBook/sh.tmpl index d858d92cf6d..4a38f604fa6 100644 --- a/Documentation/DocBook/sh.tmpl +++ b/Documentation/DocBook/sh.tmpl @@ -79,10 +79,6 @@ </sect2> </sect1> </chapter> - <chapter id="clk"> - <title>Clock Framework Extensions</title> -!Iinclude/linux/sh_clk.h - </chapter> <chapter id="mach"> <title>Machine Specific Interfaces</title> <sect1 id="dreamcast"> diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl index 4d4ce0e61e4..b4665b9c40b 100644 --- a/Documentation/DocBook/uio-howto.tmpl +++ b/Documentation/DocBook/uio-howto.tmpl @@ -16,7 +16,7 @@ </orgname> <address> - <email>hjk@linutronix.de</email> + <email>hjk@hansjkoch.de</email> </address> </affiliation> </author> @@ -114,7 +114,7 @@ GPL version 2. <para>If you know of any translations for this document, or you are interested in translating it, please email me -<email>hjk@linutronix.de</email>. +<email>hjk@hansjkoch.de</email>. </para> </sect1> @@ -171,7 +171,7 @@ interested in translating it, please email me <title>Feedback</title> <para>Find something wrong with this document? (Or perhaps something right?) I would love to hear from you. Please email me at - <email>hjk@linutronix.de</email>.</para> + <email>hjk@hansjkoch.de</email>.</para> </sect1> </chapter> diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS index 0af0e9eed5d..888ae7b83ae 100644 --- a/Documentation/arm/OMAP/DSS +++ b/Documentation/arm/OMAP/DSS @@ -255,9 +255,10 @@ framebuffer parameters. Kernel boot arguments --------------------- -vram=<size> - - Amount of total VRAM to preallocate. For example, "10M". omapfb - allocates memory for framebuffers from VRAM. +vram=<size>[,<physaddr>] + - Amount of total VRAM to preallocate and optionally a physical start + memory address. For example, "10M". omapfb allocates memory for + framebuffers from VRAM. omapfb.mode=<display>:<mode>[,...] - Default video mode for specified displays. For example, diff --git a/Documentation/block/switching-sched.txt b/Documentation/block/switching-sched.txt index d5af3f63081..71cfbdc0f74 100644 --- a/Documentation/block/switching-sched.txt +++ b/Documentation/block/switching-sched.txt @@ -16,7 +16,7 @@ you can do so by typing: As of the Linux 2.6.10 kernel, it is now possible to change the IO scheduler for a given block device on the fly (thus making it possible, for instance, to set the CFQ scheduler for the system default, but -set a specific device to use the anticipatory or noop schedulers - which +set a specific device to use the deadline or noop schedulers - which can improve that device's throughput). To set a specific scheduler, simply do this: @@ -31,7 +31,7 @@ a "cat /sys/block/DEV/queue/scheduler" - the list of valid names will be displayed, with the currently selected scheduler in brackets: # cat /sys/block/hda/queue/scheduler -noop anticipatory deadline [cfq] -# echo anticipatory > /sys/block/hda/queue/scheduler +noop deadline [cfq] +# echo deadline > /sys/block/hda/queue/scheduler # cat /sys/block/hda/queue/scheduler -noop [anticipatory] deadline cfq +noop [deadline] cfq diff --git a/Documentation/development-process/2.Process b/Documentation/development-process/2.Process index 97726eba610..911a4518634 100644 --- a/Documentation/development-process/2.Process +++ b/Documentation/development-process/2.Process @@ -154,7 +154,7 @@ The stages that a patch goes through are, generally: inclusion, it should be accepted by a relevant subsystem maintainer - though this acceptance is not a guarantee that the patch will make it all the way to the mainline. The patch will show up in the maintainer's - subsystem tree and into the staging trees (described below). When the + subsystem tree and into the -next trees (described below). When the process works, this step leads to more extensive review of the patch and the discovery of any problems resulting from the integration of this patch with work being done by others. @@ -236,7 +236,7 @@ finding the right maintainer. Sending patches directly to Linus is not normally the right way to go. -2.4: STAGING TREES +2.4: NEXT TREES The chain of subsystem trees guides the flow of patches into the kernel, but it also raises an interesting question: what if somebody wants to look @@ -250,7 +250,7 @@ changes land in the mainline kernel. One could pull changes from all of the interesting subsystem trees, but that would be a big and error-prone job. -The answer comes in the form of staging trees, where subsystem trees are +The answer comes in the form of -next trees, where subsystem trees are collected for testing and review. The older of these trees, maintained by Andrew Morton, is called "-mm" (for memory management, which is how it got started). The -mm tree integrates patches from a long list of subsystem @@ -275,7 +275,7 @@ directory at: Use of the MMOTM tree is likely to be a frustrating experience, though; there is a definite chance that it will not even compile. -The other staging tree, started more recently, is linux-next, maintained by +The other -next tree, started more recently, is linux-next, maintained by Stephen Rothwell. The linux-next tree is, by design, a snapshot of what the mainline is expected to look like after the next merge window closes. Linux-next trees are announced on the linux-kernel and linux-next mailing @@ -303,12 +303,25 @@ volatility of linux-next tends to make it a difficult development target. See http://lwn.net/Articles/289013/ for more information on this topic, and stay tuned; much is still in flux where linux-next is involved. -Besides the mmotm and linux-next trees, the kernel source tree now contains -the drivers/staging/ directory and many sub-directories for drivers or -filesystems that are on their way to being added to the kernel tree -proper, but they remain in drivers/staging/ while they still need more -work. - +2.4.1: STAGING TREES + +The kernel source tree now contains the drivers/staging/ directory, where +many sub-directories for drivers or filesystems that are on their way to +being added to the kernel tree live. They remain in drivers/staging while +they still need more work; once complete, they can be moved into the +kernel proper. This is a way to keep track of drivers that aren't +up to Linux kernel coding or quality standards, but people may want to use +them and track development. + +Greg Kroah-Hartman currently (as of 2.6.36) maintains the staging tree. +Drivers that still need work are sent to him, with each driver having +its own subdirectory in drivers/staging/. Along with the driver source +files, a TODO file should be present in the directory as well. The TODO +file lists the pending work that the driver needs for acceptance into +the kernel proper, as well as a list of people that should be Cc'd for any +patches to the driver. Staging drivers that don't currently build should +have their config entries depend upon CONFIG_BROKEN. Once they can +be successfully built without outside patches, CONFIG_BROKEN can be removed. 2.5: TOOLS diff --git a/Documentation/edac.txt b/Documentation/edac.txt index 0b875e8da96..9ee774de57c 100644 --- a/Documentation/edac.txt +++ b/Documentation/edac.txt @@ -196,7 +196,7 @@ csrow3. The representation of the above is reflected in the directory tree in EDAC's sysfs interface. Starting in directory /sys/devices/system/edac/mc each memory controller will be represented -by its own 'mcX' directory, where 'X" is the index of the MC. +by its own 'mcX' directory, where 'X' is the index of the MC. ..../edac/mc/ @@ -207,7 +207,7 @@ by its own 'mcX' directory, where 'X" is the index of the MC. .... Under each 'mcX' directory each 'csrowX' is again represented by a -'csrowX', where 'X" is the csrow index: +'csrowX', where 'X' is the csrow index: .../mc/mc0/ @@ -232,7 +232,7 @@ EDAC control and attribute files. In 'mcX' directories are EDAC control and attribute files for -this 'X" instance of the memory controllers: +this 'X' instance of the memory controllers: Counter reset control file: @@ -343,7 +343,7 @@ Sdram memory scrubbing rate: 'csrowX' DIRECTORIES In the 'csrowX' directories are EDAC control and attribute files for -this 'X" instance of csrow: +this 'X' instance of csrow: Total Uncorrectable Errors count attribute file: diff --git a/Documentation/fb/00-INDEX b/Documentation/fb/00-INDEX index a618fd99c9f..30a70542e82 100644 --- a/Documentation/fb/00-INDEX +++ b/Documentation/fb/00-INDEX @@ -4,33 +4,41 @@ please mail me. Geert Uytterhoeven <geert@linux-m68k.org> 00-INDEX - - this file + - this file. arkfb.txt - info on the fbdev driver for ARK Logic chips. aty128fb.txt - info on the ATI Rage128 frame buffer driver. cirrusfb.txt - info on the driver for Cirrus Logic chipsets. +cmap_xfbdev.txt + - an introduction to fbdev's cmap structures. deferred_io.txt - an introduction to deferred IO. +efifb.txt + - info on the EFI platform driver for Intel based Apple computers. +ep93xx-fb.txt + - info on the driver for EP93xx LCD controller. fbcon.txt - intro to and usage guide for the framebuffer console (fbcon). framebuffer.txt - introduction to frame buffer devices. -imacfb.txt - - info on the generic EFI platform driver for Intel based Macs. +gxfb.txt + - info on the framebuffer driver for AMD Geode GX2 based processors. intel810.txt - documentation for the Intel 810/815 framebuffer driver. intelfb.txt - docs for Intel 830M/845G/852GM/855GM/865G/915G/945G fb driver. internals.txt - quick overview of frame buffer device internals. +lxfb.txt + - info on the framebuffer driver for AMD Geode LX based processors. matroxfb.txt - info on the Matrox framebuffer driver for Alpha, Intel and PPC. +metronomefb.txt + - info on the driver for the Metronome display controller. modedb.txt - info on the video mode database. -matroxfb.txt - - info on the Matrox frame buffer driver. pvr2fb.txt - info on the PowerVR 2 frame buffer driver. pxafb.txt @@ -39,13 +47,23 @@ s3fb.txt - info on the fbdev driver for S3 Trio/Virge chips. sa1100fb.txt - information about the driver for the SA-1100 LCD controller. +sh7760fb.txt + - info on the SH7760/SH7763 integrated LCDC Framebuffer driver. sisfb.txt - info on the framebuffer device driver for various SiS chips. sstfb.txt - info on the frame buffer driver for 3dfx' Voodoo Graphics boards. tgafb.txt - - info on the TGA (DECChip 21030) frame buffer driver + - info on the TGA (DECChip 21030) frame buffer driver. +tridentfb.txt + info on the framebuffer driver for some Trident chip based cards. +uvesafb.txt + - info on the userspace VESA (VBE2+ compliant) frame buffer device. vesafb.txt - - info on the VESA frame buffer device + - info on the VESA frame buffer device. +viafb.modes + - list of modes for VIA Integration Graphic Chip. +viafb.txt + - info on the VIA Integration Graphic Chip console framebuffer driver. vt8623fb.txt - info on the fb driver for the graphics core in VIA VT8623 chipsets. diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index d8f36f984fa..6c2f55e05f1 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -554,3 +554,13 @@ Why: This is a legacy interface which have been replaced by a more Who: NeilBrown <neilb@suse.de> ---------------------------- + +What: i2c_adapter.id +When: June 2011 +Why: This field is deprecated. I2C device drivers shouldn't change their + behavior based on the underlying I2C adapter. Instead, the I2C + adapter driver should instantiate the I2C devices and provide the + needed platform-specific information. +Who: Jean Delvare <khali@linux-fr.org> + +---------------------------- diff --git a/Documentation/filesystems/configfs/configfs_example_explicit.c b/Documentation/filesystems/configfs/configfs_example_explicit.c index d428cc9f07f..fd53869f563 100644 --- a/Documentation/filesystems/configfs/configfs_example_explicit.c +++ b/Documentation/filesystems/configfs/configfs_example_explicit.c @@ -89,7 +89,7 @@ static ssize_t childless_storeme_write(struct childless *childless, char *p = (char *) page; tmp = simple_strtoul(p, &p, 10); - if (!p || (*p && (*p != '\n'))) + if ((*p != '\0') && (*p != '\n')) return -EINVAL; if (tmp > INT_MAX) diff --git a/Documentation/filesystems/xfs-delayed-logging-design.txt b/Documentation/filesystems/xfs-delayed-logging-design.txt index 96d0df28bed..7445bf335da 100644 --- a/Documentation/filesystems/xfs-delayed-logging-design.txt +++ b/Documentation/filesystems/xfs-delayed-logging-design.txt @@ -794,17 +794,6 @@ designed. Roadmap: -2.6.37 Remove experimental tag from mount option - => should be roughly 6 months after initial merge - => enough time to: - => gain confidence and fix problems reported by early - adopters (a.k.a. guinea pigs) - => address worst performance regressions and undesired - behaviours - => start tuning/optimising code for parallelism - => start tuning/optimising algorithms consuming - excessive CPU time - 2.6.39 Switch default mount option to use delayed logging => should be roughly 12 months after initial merge => enough time to shake out remaining problems before next round of diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt index 9633da01ff4..792faa3c06c 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio.txt @@ -617,6 +617,16 @@ and have the following read/write attributes: is configured as an output, this value may be written; any nonzero value is treated as high. + If the pin can be configured as interrupt-generating interrupt + and if it has been configured to generate interrupts (see the + description of "edge"), you can poll(2) on that file and + poll(2) will return whenever the interrupt was triggered. If + you use poll(2), set the events POLLPRI and POLLERR. If you + use select(2), set the file descriptor in exceptfds. After + poll(2) returns, either lseek(2) to the beginning of the sysfs + file and read the new value or close the file and re-open it + to read the value. + "edge" ... reads as either "none", "rising", "falling", or "both". Write these strings to select the signal edge(s) that will make poll(2) on the "value" file return. diff --git a/Documentation/hwmon/lm93 b/Documentation/hwmon/lm93 index ac711f357fa..7a10616d0b4 100644 --- a/Documentation/hwmon/lm93 +++ b/Documentation/hwmon/lm93 @@ -11,7 +11,7 @@ Authors: Mark M. Hoffman <mhoffman@lightlink.com> Ported to 2.6 by Eric J. Bowersox <ericb@aspsys.com> Adapted to 2.6.20 by Carsten Emde <ce@osadl.org> - Modified for mainline integration by Hans J. Koch <hjk@linutronix.de> + Modified for mainline integration by Hans J. Koch <hjk@hansjkoch.de> Module Parameters ----------------- diff --git a/Documentation/hwmon/max6650 b/Documentation/hwmon/max6650 index 8be7beb9e3e..c565650fcfc 100644 --- a/Documentation/hwmon/max6650 +++ b/Documentation/hwmon/max6650 @@ -8,7 +8,7 @@ Supported chips: Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf Authors: - Hans J. Koch <hjk@linutronix.de> + Hans J. Koch <hjk@hansjkoch.de> John Morris <john.morris@spirentcom.com> Claus Gindhart <claus.gindhart@kontron.com> diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index ed45e9802aa..cdd2a6e8a3b 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -706,7 +706,7 @@ and is between 256 and 4096 characters. It is defined in the file arch/x86/kernel/cpu/cpufreq/elanfreq.c. elevator= [IOSCHED] - Format: {"anticipatory" | "cfq" | "deadline" | "noop"} + Format: {"cfq" | "deadline" | "noop"} See Documentation/block/as-iosched.txt and Documentation/block/deadline-iosched.txt for details. @@ -2385,6 +2385,11 @@ and is between 256 and 4096 characters. It is defined in the file improve throughput, but will also increase the amount of memory reserved for use by the client. + swapaccount[=0|1] + [KNL] Enable accounting of swap in memory resource + controller if no parameter or 1 is given or disable + it if 0 is given (See Documentation/cgroups/memory.txt) + swiotlb= [IA-64] Number of I/O TLB slabs switches= [HW,M68k] diff --git a/Documentation/leds-class.txt b/Documentation/leds-class.txt index 8fd5ca2ae32..58b266bd184 100644 --- a/Documentation/leds-class.txt +++ b/Documentation/leds-class.txt @@ -60,15 +60,18 @@ Hardware accelerated blink of LEDs Some LEDs can be programmed to blink without any CPU interaction. To support this feature, a LED driver can optionally implement the -blink_set() function (see <linux/leds.h>). If implemented, triggers can -attempt to use it before falling back to software timers. The blink_set() -function should return 0 if the blink setting is supported, or -EINVAL -otherwise, which means that LED blinking will be handled by software. - -The blink_set() function should choose a user friendly blinking -value if it is called with *delay_on==0 && *delay_off==0 parameters. In -this case the driver should give back the chosen value through delay_on -and delay_off parameters to the leds subsystem. +blink_set() function (see <linux/leds.h>). To set an LED to blinking, +however, it is better to use use the API function led_blink_set(), +as it will check and implement software fallback if necessary. + +To turn off blinking again, use the API function led_brightness_set() +as that will not just set the LED brightness but also stop any software +timers that may have been required for blinking. + +The blink_set() function should choose a user friendly blinking value +if it is called with *delay_on==0 && *delay_off==0 parameters. In this +case the driver should give back the chosen value through delay_on and +delay_off parameters to the leds subsystem. Setting the brightness to zero with brightness_set() callback function should completely turn off the LED and cancel the previously programmed diff --git a/Documentation/leds/leds-lp5521.txt b/Documentation/leds/leds-lp5521.txt new file mode 100644 index 00000000000..c4d8d151e0f --- /dev/null +++ b/Documentation/leds/leds-lp5521.txt @@ -0,0 +1,88 @@ +Kernel driver for lp5521 +======================== + +* National Semiconductor LP5521 led driver chip +* Datasheet: http://www.national.com/pf/LP/LP5521.html + +Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo +Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com) + +Description +----------- + +LP5521 can drive up to 3 channels. Leds can be controlled directly via +the led class control interface. Channels have generic names: +lp5521:channelx, where x is 0 .. 2 + +All three channels can be also controlled using the engine micro programs. +More details of the instructions can be found from the public data sheet. + +Control interface for the engines: +x is 1 .. 3 +enginex_mode : disabled, load, run +enginex_load : store program (visible only in engine load mode) + +Example (start to blink the channel 2 led): +cd /sys/class/leds/lp5521:channel2/device +echo "load" > engine3_mode +echo "037f4d0003ff6000" > engine3_load +echo "run" > engine3_mode + +stop the engine: +echo "disabled" > engine3_mode + +sysfs contains a selftest entry. +The test communicates with the chip and checks that +the clock mode is automatically set to the requested one. + +Each channel has its own led current settings. +/sys/class/leds/lp5521:channel0/led_current - RW +/sys/class/leds/lp5521:channel0/max_current - RO +Format: 10x mA i.e 10 means 1.0 mA + +example platform data: + +Note: chan_nr can have values between 0 and 2. + +static struct lp5521_led_config lp5521_led_config[] = { + { + .chan_nr = 0, + .led_current = 50, + .max_current = 130, + }, { + .chan_nr = 1, + .led_current = 0, + .max_current = 130, + }, { + .chan_nr = 2, + .led_current = 0, + .max_current = 130, + } +}; + +static int lp5521_setup(void) +{ + /* setup HW resources */ +} + +static void lp5521_release(void) +{ + /* Release HW resources */ +} + +static void lp5521_enable(bool state) +{ + /* Control of chip enable signal */ +} + +static struct lp5521_platform_data lp5521_platform_data = { + .led_config = lp5521_led_config, + .num_channels = ARRAY_SIZE(lp5521_led_config), + .clock_mode = LP5521_CLOCK_EXT, + .setup_resources = lp5521_setup, + .release_resources = lp5521_release, + .enable = lp5521_enable, +}; + +If the current is set to 0 in the platform data, that channel is +disabled and it is not visible in the sysfs. diff --git a/Documentation/leds/leds-lp5523.txt b/Documentation/leds/leds-lp5523.txt new file mode 100644 index 00000000000..fad2feb8b7c --- /dev/null +++ b/Documentation/leds/leds-lp5523.txt @@ -0,0 +1,83 @@ +Kernel driver for lp5523 +======================== + +* National Semiconductor LP5523 led driver chip +* Datasheet: http://www.national.com/pf/LP/LP5523.html + +Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo +Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com) + +Description +----------- +LP5523 can drive up to 9 channels. Leds can be controlled directly via +the led class control interface. Channels have generic names: +lp5523:channelx where x is 0...8 + +The chip provides 3 engines. Each engine can control channels without +interaction from the main CPU. Details of the micro engine code can be found +from the public data sheet. Leds can be muxed to different channels. + +Control interface for the engines: +x is 1 .. 3 +enginex_mode : disabled, load, run +enginex_load : microcode load (visible only in load mode) +enginex_leds : led mux control (visible only in load mode) + +cd /sys/class/leds/lp5523:channel2/device +echo "load" > engine3_mode +echo "9d80400004ff05ff437f0000" > engine3_load +echo "111111111" > engine3_leds +echo "run" > engine3_mode + +sysfs contains a selftest entry. It measures each channel +voltage level and checks if it looks reasonable. If the level is too high, +the led is missing; if the level is too low, there is a short circuit. + +Selftest uses always the current from the platform data. + +Each channel contains led current settings. +/sys/class/leds/lp5523:channel2/led_current - RW +/sys/class/leds/lp5523:channel2/max_current - RO +Format: 10x mA i.e 10 means 1.0 mA + +Example platform data: + +Note - chan_nr can have values between 0 and 8. + +static struct lp5523_led_config lp5523_led_config[] = { + { + .chan_nr = 0, + .led_current = 50, + .max_current = 130, + }, +... + }, { + .chan_nr = 8, + .led_current = 50, + .max_current = 130, + } +}; + +static int lp5523_setup(void) +{ + /* Setup HW resources */ +} + +static void lp5523_release(void) +{ + /* Release HW resources */ +} + +static void lp5523_enable(bool state) +{ + /* Control chip enable signal */ +} + +static struct lp5523_platform_data lp5523_platform_data = { + .led_config = lp5523_led_config, + .num_channels = ARRAY_SIZE(lp5523_led_config), + .clock_mode = LP5523_CLOCK_EXT, + .setup_resources = lp5523_setup, + .release_resources = lp5523_release, + .enable = lp5523_enable, +}; diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index c7165f4cb79..3c5e465296e 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -20,6 +20,15 @@ ip_no_pmtu_disc - BOOLEAN min_pmtu - INTEGER default 562 - minimum discovered Path MTU +route/max_size - INTEGER + Maximum number of routes allowed in the kernel. Increase + this when using large numbers of interfaces and/or routes. + +neigh/default/gc_thresh3 - INTEGER + Maximum number of neighbor entries allowed. Increase this + when using large numbers of interfaces and when communicating + with large numbers of directly-connected peers. + mtu_expires - INTEGER Time, in seconds, that cached PMTU information is kept. @@ -135,6 +144,7 @@ tcp_adv_win_scale - INTEGER Count buffering overhead as bytes/2^tcp_adv_win_scale (if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale), if it is <= 0. + Possible values are [-31, 31], inclusive. Default: 2 tcp_allowed_congestion_control - STRING diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt index 44d87ad3cea..cd445582d1f 100644 --- a/Documentation/power/opp.txt +++ b/Documentation/power/opp.txt @@ -37,6 +37,9 @@ Typical usage of the OPP library is as follows: SoC framework -> modifies on required cases certain OPPs -> OPP layer -> queries to search/retrieve information -> +Architectures that provide a SoC framework for OPP should select ARCH_HAS_OPP +to make the OPP layer available. + OPP layer expects each domain to be represented by a unique device pointer. SoC framework registers a set of initial OPPs per device with the OPP layer. This list is expected to be an optimally small number typically around 5 per device. diff --git a/Documentation/rbtree.txt b/Documentation/rbtree.txt index 221f38be98f..19f8278c385 100644 --- a/Documentation/rbtree.txt +++ b/Documentation/rbtree.txt @@ -21,8 +21,8 @@ three rotations, respectively, to balance the tree), with slightly slower To quote Linux Weekly News: There are a number of red-black trees in use in the kernel. - The anticipatory, deadline, and CFQ I/O schedulers all employ - rbtrees to track requests; the packet CD/DVD driver does the same. + The deadline and CFQ I/O schedulers employ rbtrees to + track requests; the packet CD/DVD driver does the same. The high-resolution timer code uses an rbtree to organize outstanding timer requests. The ext3 filesystem tracks directory entries in a red-black tree. Virtual memory areas (VMAs) are tracked with red-black diff --git a/Documentation/sh/clk.txt b/Documentation/sh/clk.txt deleted file mode 100644 index 114b595cfa9..00000000000 --- a/Documentation/sh/clk.txt +++ /dev/null @@ -1,32 +0,0 @@ -Clock framework on SuperH architecture - -The framework on SH extends existing API by the function clk_set_rate_ex, -which prototype is as follows: - - clk_set_rate_ex (struct clk *clk, unsigned long rate, int algo_id) - -The algo_id parameter is used to specify algorithm used to recalculate clocks, -adjanced to clock, specified as first argument. It is assumed that algo_id==0 -means no changes to adjanced clock - -Internally, the clk_set_rate_ex forwards request to clk->ops->set_rate method, -if it is present in ops structure. The method should set the clock rate and adjust -all needed clocks according to the passed algo_id. -Exact values for algo_id are machine-dependent. For the sh7722, the following -values are defined: - - NO_CHANGE = 0, - IUS_N1_N1, /* I:U = N:1, U:Sh = N:1 */ - IUS_322, /* I:U:Sh = 3:2:2 */ - IUS_522, /* I:U:Sh = 5:2:2 */ - IUS_N11, /* I:U:Sh = N:1:1 */ - SB_N1, /* Sh:B = N:1 */ - SB3_N1, /* Sh:B3 = N:1 */ - SB3_32, /* Sh:B3 = 3:2 */ - SB3_43, /* Sh:B3 = 4:3 */ - SB3_54, /* Sh:B3 = 5:4 */ - BP_N1, /* B:P = N:1 */ - IP_N1 /* I:P = N:1 */ - -Each of these constants means relation between clocks that can be set via the FRQCR -register diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 3894eaa2348..209e1584c3d 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -28,6 +28,7 @@ show up in /proc/sys/kernel: - core_uses_pid - ctrl-alt-del - dentry-state +- dmesg_restrict - domainname - hostname - hotplug @@ -213,6 +214,19 @@ to decide what to do with it. ============================================================== +dmesg_restrict: + +This toggle indicates whether unprivileged users are prevented from using +dmesg(8) to view messages from the kernel's log buffer. When +dmesg_restrict is set to (0) there are no restrictions. When +dmesg_restrict is set set to (1), users must have CAP_SYS_ADMIN to use +dmesg(8). + +The kernel config option CONFIG_SECURITY_DMESG_RESTRICT sets the default +value of dmesg_restrict. + +============================================================== + domainname & hostname: These files can be used to set the NIS/YP domainname and the |