diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/acpi/apei/einj.txt | 59 | ||||
| -rw-r--r-- | Documentation/kernel-parameters.txt | 12 |
2 files changed, 69 insertions, 2 deletions
diff --git a/Documentation/acpi/apei/einj.txt b/Documentation/acpi/apei/einj.txt new file mode 100644 index 00000000000..dfab71848dc --- /dev/null +++ b/Documentation/acpi/apei/einj.txt @@ -0,0 +1,59 @@ + APEI Error INJection + ~~~~~~~~~~~~~~~~~~~~ + +EINJ provides a hardware error injection mechanism +It is very useful for debugging and testing of other APEI and RAS features. + +To use EINJ, make sure the following are enabled in your kernel +configuration: + +CONFIG_DEBUG_FS +CONFIG_ACPI_APEI +CONFIG_ACPI_APEI_EINJ + +The user interface of EINJ is debug file system, under the +directory apei/einj. The following files are provided. + +- available_error_type + Reading this file returns the error injection capability of the + platform, that is, which error types are supported. The error type + definition is as follow, the left field is the error type value, the + right field is error description. + + 0x00000001 Processor Correctable + 0x00000002 Processor Uncorrectable non-fatal + 0x00000004 Processor Uncorrectable fatal + 0x00000008 Memory Correctable + 0x00000010 Memory Uncorrectable non-fatal + 0x00000020 Memory Uncorrectable fatal + 0x00000040 PCI Express Correctable + 0x00000080 PCI Express Uncorrectable fatal + 0x00000100 PCI Express Uncorrectable non-fatal + 0x00000200 Platform Correctable + 0x00000400 Platform Uncorrectable non-fatal + 0x00000800 Platform Uncorrectable fatal + + The format of file contents are as above, except there are only the + available error type lines. + +- error_type + This file is used to set the error type value. The error type value + is defined in "available_error_type" description. + +- error_inject + Write any integer to this file to trigger the error + injection. Before this, please specify all necessary error + parameters. + +- param1 + This file is used to set the first error parameter value. Effect of + parameter depends on error_type specified. For memory error, this is + physical memory address. + +- param2 + This file is used to set the second error parameter value. Effect of + parameter depends on error_type specified. For memory error, this is + physical memory address mask. + +For more information about EINJ, please refer to ACPI specification +version 4.0, section 17.5. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index a5c05506676..1808f1157f3 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -145,11 +145,10 @@ and is between 256 and 4096 characters. It is defined in the file acpi= [HW,ACPI,X86] Advanced Configuration and Power Interface - Format: { force | off | ht | strict | noirq | rsdt } + Format: { force | off | strict | noirq | rsdt } force -- enable ACPI if default was off off -- disable ACPI if default was on noirq -- do not use ACPI for IRQ routing - ht -- run only enough ACPI to enable Hyper Threading strict -- Be less tolerant of platforms that are not strictly ACPI specification compliant. rsdt -- prefer RSDT over (default) XSDT @@ -758,6 +757,10 @@ and is between 256 and 4096 characters. It is defined in the file Default value is 0. Value can be changed at runtime via /selinux/enforce. + erst_disable [ACPI] + Disable Error Record Serialization Table (ERST) + support. + ether= [HW,NET] Ethernet cards parameters This option is obsoleted by the "netdev=" option, which has equivalent usage. See its documentation for details. @@ -852,6 +855,11 @@ and is between 256 and 4096 characters. It is defined in the file hd= [EIDE] (E)IDE hard drive subsystem geometry Format: <cyl>,<head>,<sect> + hest_disable [ACPI] + Disable Hardware Error Source Table (HEST) support; + corresponding firmware-first mode error processing + logic will be disabled. + highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact size of <nn>. This works even on boxes that have no highmem otherwise. This also works to reduce highmem |