diff options
Diffstat (limited to 'Documentation')
31 files changed, 661 insertions, 339 deletions
diff --git a/Documentation/ABI/testing/sysfs-dev b/Documentation/ABI/testing/sysfs-dev new file mode 100644 index 00000000000..a9f2b8b0530 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-dev @@ -0,0 +1,20 @@ +What: /sys/dev +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Dan Williams <dan.j.williams@intel.com> +Description: The /sys/dev tree provides a method to look up the sysfs + path for a device using the information returned from + stat(2). There are two directories, 'block' and 'char', + beneath /sys/dev containing symbolic links with names of + the form "<major>:<minor>". These links point to the + corresponding sysfs path for the given device. + + Example: + $ readlink /sys/dev/block/8:32 + ../../block/sdc + + Entries in /sys/dev/char and /sys/dev/block will be + dynamically created and destroyed as devices enter and + leave the system. + +Users: mdadm <linux-raid@vger.kernel.org> diff --git a/Documentation/DMA-attributes.txt b/Documentation/DMA-attributes.txt index 6d772f84b47..b768cc0e402 100644 --- a/Documentation/DMA-attributes.txt +++ b/Documentation/DMA-attributes.txt @@ -22,3 +22,12 @@ ready and available in memory. The DMA of the "completion indication" could race with data DMA. Mapping the memory used for completion indications with DMA_ATTR_WRITE_BARRIER would prevent the race. +DMA_ATTR_WEAK_ORDERING +---------------------- + +DMA_ATTR_WEAK_ORDERING specifies that reads and writes to the mapping +may be weakly ordered, that is that reads and writes may pass each other. + +Since it is optional for platforms to implement DMA_ATTR_WEAK_ORDERING, +those that do not will simply ignore the attribute and exhibit default +behavior. diff --git a/Documentation/DocBook/gadget.tmpl b/Documentation/DocBook/gadget.tmpl index 5a8ffa761e0..ea3bc9565e6 100644 --- a/Documentation/DocBook/gadget.tmpl +++ b/Documentation/DocBook/gadget.tmpl @@ -524,6 +524,44 @@ These utilities include endpoint autoconfiguration. <!-- !Edrivers/usb/gadget/epautoconf.c --> </sect1> +<sect1 id="composite"><title>Composite Device Framework</title> + +<para>The core API is sufficient for writing drivers for composite +USB devices (with more than one function in a given configuration), +and also multi-configuration devices (also more than one function, +but not necessarily sharing a given configuration). +There is however an optional framework which makes it easier to +reuse and combine functions. +</para> + +<para>Devices using this framework provide a <emphasis>struct +usb_composite_driver</emphasis>, which in turn provides one or +more <emphasis>struct usb_configuration</emphasis> instances. +Each such configuration includes at least one +<emphasis>struct usb_function</emphasis>, which packages a user +visible role such as "network link" or "mass storage device". +Management functions may also exist, such as "Device Firmware +Upgrade". +</para> + +!Iinclude/linux/usb/composite.h +!Edrivers/usb/gadget/composite.c + +</sect1> + +<sect1 id="functions"><title>Composite Device Functions</title> + +<para>At this writing, a few of the current gadget drivers have +been converted to this framework. +Near-term plans include converting all of them, except for "gadgetfs". +</para> + +!Edrivers/usb/gadget/f_acm.c +!Edrivers/usb/gadget/f_serial.c + +</sect1> + + </chapter> <chapter id="controllers"><title>Peripheral Controller Drivers</title> diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl index fdd7f4f887b..df87d1b9360 100644 --- a/Documentation/DocBook/uio-howto.tmpl +++ b/Documentation/DocBook/uio-howto.tmpl @@ -21,6 +21,18 @@ </affiliation> </author> +<copyright> + <year>2006-2008</year> + <holder>Hans-Jürgen Koch.</holder> +</copyright> + +<legalnotice> +<para> +This documentation is Free Software licensed under the terms of the +GPL version 2. +</para> +</legalnotice> + <pubdate>2006-12-11</pubdate> <abstract> @@ -30,6 +42,12 @@ <revhistory> <revision> + <revnumber>0.5</revnumber> + <date>2008-05-22</date> + <authorinitials>hjk</authorinitials> + <revremark>Added description of write() function.</revremark> + </revision> + <revision> <revnumber>0.4</revnumber> <date>2007-11-26</date> <authorinitials>hjk</authorinitials> @@ -57,20 +75,9 @@ </bookinfo> <chapter id="aboutthisdoc"> -<?dbhtml filename="about.html"?> +<?dbhtml filename="aboutthis.html"?> <title>About this document</title> -<sect1 id="copyright"> -<?dbhtml filename="copyright.html"?> -<title>Copyright and License</title> -<para> - Copyright (c) 2006 by Hans-Jürgen Koch.</para> -<para> -This documentation is Free Software licensed under the terms of the -GPL version 2. -</para> -</sect1> - <sect1 id="translations"> <?dbhtml filename="translations.html"?> <title>Translations</title> @@ -189,6 +196,30 @@ interested in translating it, please email me represents the total interrupt count. You can use this number to figure out if you missed some interrupts. </para> + <para> + For some hardware that has more than one interrupt source internally, + but not separate IRQ mask and status registers, there might be + situations where userspace cannot determine what the interrupt source + was if the kernel handler disables them by writing to the chip's IRQ + register. In such a case, the kernel has to disable the IRQ completely + to leave the chip's register untouched. Now the userspace part can + determine the cause of the interrupt, but it cannot re-enable + interrupts. Another cornercase is chips where re-enabling interrupts + is a read-modify-write operation to a combined IRQ status/acknowledge + register. This would be racy if a new interrupt occurred + simultaneously. + </para> + <para> + To address these problems, UIO also implements a write() function. It + is normally not used and can be ignored for hardware that has only a + single interrupt source or has separate IRQ mask and status registers. + If you need it, however, a write to <filename>/dev/uioX</filename> + will call the <function>irqcontrol()</function> function implemented + by the driver. You have to write a 32-bit value that is usually either + 0 or 1 to disable or enable interrupts. If a driver does not implement + <function>irqcontrol()</function>, <function>write()</function> will + return with <varname>-ENOSYS</varname>. + </para> <para> To handle interrupts properly, your custom kernel module can @@ -362,6 +393,14 @@ device is actually used. <function>open()</function>, you will probably also want a custom <function>release()</function> function. </para></listitem> + +<listitem><para> +<varname>int (*irqcontrol)(struct uio_info *info, s32 irq_on) +</varname>: Optional. If you need to be able to enable or disable +interrupts from userspace by writing to <filename>/dev/uioX</filename>, +you can implement this function. The parameter <varname>irq_on</varname> +will be 0 to disable interrupts and 1 to enable them. +</para></listitem> </itemizedlist> <para> diff --git a/Documentation/HOWTO b/Documentation/HOWTO index 619e8caf30d..c2371c5a98f 100644 --- a/Documentation/HOWTO +++ b/Documentation/HOWTO @@ -358,7 +358,7 @@ Here is a list of some of the different kernel trees available: - pcmcia, Dominik Brodowski <linux@dominikbrodowski.net> git.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git - - SCSI, James Bottomley <James.Bottomley@SteelEye.com> + - SCSI, James Bottomley <James.Bottomley@hansenpartnership.com> git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git - x86, Ingo Molnar <mingo@elte.hu> diff --git a/Documentation/filesystems/bfs.txt b/Documentation/filesystems/bfs.txt index ea825e178e7..78043d5a8fc 100644 --- a/Documentation/filesystems/bfs.txt +++ b/Documentation/filesystems/bfs.txt @@ -26,11 +26,11 @@ You can simplify mounting by just typing: this will allocate the first available loopback device (and load loop.o kernel module if necessary) automatically. If the loopback driver is not -loaded automatically, make sure that your kernel is compiled with kmod -support (CONFIG_KMOD) enabled. Beware that umount will not -deallocate /dev/loopN device if /etc/mtab file on your system is a -symbolic link to /proc/mounts. You will need to do it manually using -"-d" switch of losetup(8). Read losetup(8) manpage for more info. +loaded automatically, make sure that you have compiled the module and +that modprobe is functioning. Beware that umount will not deallocate +/dev/loopN device if /etc/mtab file on your system is a symbolic link to +/proc/mounts. You will need to do it manually using "-d" switch of +losetup(8). Read losetup(8) manpage for more info. To create the BFS image under UnixWare you need to find out first which slice contains it. The command prtvtoc(1M) is your friend: diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt index 7f27b8f840d..9e9c348275a 100644 --- a/Documentation/filesystems/sysfs.txt +++ b/Documentation/filesystems/sysfs.txt @@ -248,6 +248,7 @@ The top level sysfs directory looks like: block/ bus/ class/ +dev/ devices/ firmware/ net/ @@ -274,6 +275,11 @@ fs/ contains a directory for some filesystems. Currently each filesystem wanting to export attributes must create its own hierarchy below fs/ (see ./fuse.txt for an example). +dev/ contains two directories char/ and block/. Inside these two +directories there are symlinks named <major>:<minor>. These symlinks +point to the sysfs directory for the given device. /sys/dev provides a +quick way to lookup the sysfs interface for a device from the result of +a stat(2) operation. More information can driver-model specific features can be found in Documentation/driver-model/. diff --git a/Documentation/ia64/paravirt_ops.txt b/Documentation/ia64/paravirt_ops.txt new file mode 100644 index 00000000000..39ded02ec33 --- /dev/null +++ b/Documentation/ia64/paravirt_ops.txt @@ -0,0 +1,137 @@ +Paravirt_ops on IA64 +==================== + 21 May 2008, Isaku Yamahata <yamahata@valinux.co.jp> + + +Introduction +------------ +The aim of this documentation is to help with maintainability and/or to +encourage people to use paravirt_ops/IA64. + +paravirt_ops (pv_ops in short) is a way for virtualization support of +Linux kernel on x86. Several ways for virtualization support were +proposed, paravirt_ops is the winner. +On the other hand, now there are also several IA64 virtualization +technologies like kvm/IA64, xen/IA64 and many other academic IA64 +hypervisors so that it is good to add generic virtualization +infrastructure on Linux/IA64. + + +What is paravirt_ops? +--------------------- +It has been developed on x86 as virtualization support via API, not ABI. +It allows each hypervisor to override operations which are important for +hypervisors at API level. And it allows a single kernel binary to run on +all supported execution environments including native machine. +Essentially paravirt_ops is a set of function pointers which represent +operations corresponding to low level sensitive instructions and high +level functionalities in various area. But one significant difference +from usual function pointer table is that it allows optimization with +binary patch. It is because some of these operations are very +performance sensitive and indirect call overhead is not negligible. +With binary patch, indirect C function call can be transformed into +direct C function call or in-place execution to eliminate the overhead. + +Thus, operations of paravirt_ops are classified into three categories. +- simple indirect call + These operations correspond to high level functionality so that the + overhead of indirect call isn't very important. + +- indirect call which allows optimization with binary patch + Usually these operations correspond to low level instructions. They + are called frequently and performance critical. So the overhead is + very important. + +- a set of macros for hand written assembly code + Hand written assembly codes (.S files) also need paravirtualization + because they include sensitive instructions or some of code paths in + them are very performance critical. + + +The relation to the IA64 machine vector +--------------------------------------- +Linux/IA64 has the IA64 machine vector functionality which allows the +kernel to switch implementations (e.g. initialization, ipi, dma api...) +depending on executing platform. +We can replace some implementations very easily defining a new machine +vector. Thus another approach for virtualization support would be +enhancing the machine vector functionality. +But paravirt_ops approach was taken because +- virtualization support needs wider support than machine vector does. + e.g. low level instruction paravirtualization. It must be + initialized very early before platform detection. + +- virtualization support needs more functionality like binary patch. + Probably the calling overhead might not be very large compared to the + emulation overhead of virtualization. However in the native case, the + overhead should be eliminated completely. + A single kernel binary should run on each environment including native, + and the overhead of paravirt_ops on native environment should be as + small as possible. + +- for full virtualization technology, e.g. KVM/IA64 or + Xen/IA64 HVM domain, the result would be + (the emulated platform machine vector. probably dig) + (pv_ops). + This means that the virtualization support layer should be under + the machine vector layer. + +Possibly it might be better to move some function pointers from +paravirt_ops to machine vector. In fact, Xen domU case utilizes both +pv_ops and machine vector. + + +IA64 paravirt_ops +----------------- +In this section, the concrete paravirt_ops will be discussed. +Because of the architecture difference between ia64 and x86, the +resulting set of functions is very different from x86 pv_ops. + +- C function pointer tables +They are not very performance critical so that simple C indirect +function call is acceptable. The following structures are defined at +this moment. For details see linux/include/asm-ia64/paravirt.h + - struct pv_info + This structure describes the execution environment. + - struct pv_init_ops + This structure describes the various initialization hooks. + - struct pv_iosapic_ops + This structure describes hooks to iosapic operations. + - struct pv_irq_ops + This structure describes hooks to irq related operations + - struct pv_time_op + This structure describes hooks to steal time accounting. + +- a set of indirect calls which need optimization +Currently this class of functions correspond to a subset of IA64 +intrinsics. At this moment the optimization with binary patch isn't +implemented yet. +struct pv_cpu_op is defined. For details see +linux/include/asm-ia64/paravirt_privop.h +Mostly they correspond to ia64 intrinsics 1-to-1. +Caveat: Now they are defined as C indirect function pointers, but in +order to support binary patch optimization, they will be changed +using GCC extended inline assembly code. + +- a set of macros for hand written assembly code (.S files) +For maintenance purpose, the taken approach for .S files is single +source code and compile multiple times with different macros definitions. +Each pv_ops instance must define those macros to compile. +The important thing here is that sensitive, but non-privileged +instructions must be paravirtualized and that some privileged +instructions also need paravirtualization for reasonable performance. +Developers who modify .S files must be aware of that. At this moment +an easy checker is implemented to detect paravirtualization breakage. +But it doesn't cover all the cases. + +Sometimes this set of macros is called pv_cpu_asm_op. But there is no +corresponding structure in the source code. +Those macros mostly 1:1 correspond to a subset of privileged +instructions. See linux/include/asm-ia64/native/inst.h. +And some functions written in assembly also need to be overrided so +that each pv_ops instance have to define some macros. Again see +linux/include/asm-ia64/native/inst.h. + + +Those structures must be initialized very early before start_kernel. +Probably initialized in head.S using multi entry point or some other trick. +For native case implementation see linux/arch/ia64/kernel/paravirt.c. diff --git a/Documentation/input/gameport-programming.txt b/Documentation/input/gameport-programming.txt index 14e0a8b7022..03a74fc3b49 100644 --- a/Documentation/input/gameport-programming.txt +++ b/Documentation/input/gameport-programming.txt @@ -1,5 +1,3 @@ -$Id: gameport-programming.txt,v 1.3 2001/04/24 13:51:37 vojtech Exp $ - Programming gameport drivers ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/input/input.txt b/Documentation/input/input.txt index ff8cea0225f..686ee9932df 100644 --- a/Documentation/input/input.txt +++ b/Documentation/input/input.txt @@ -1,7 +1,6 @@ Linux Input drivers v1.0 (c) 1999-2001 Vojtech Pavlik <vojtech@ucw.cz> Sponsored by SuSE - $Id: input.txt,v 1.8 2002/05/29 03:15:01 bradleym Exp $ ---------------------------------------------------------------------------- 0. Disclaimer diff --git a/Documentation/input/joystick-api.txt b/Documentation/input/joystick-api.txt index acbd32b8845..c507330740c 100644 --- a/Documentation/input/joystick-api.txt +++ b/Documentation/input/joystick-api.txt @@ -5,8 +5,6 @@ 7 Aug 1998 - $Id: joystick-api.txt,v 1.2 2001/05/08 21:21:23 vojtech Exp $ - 1. Initialization ~~~~~~~~~~~~~~~~~ diff --git a/Documentation/input/joystick-parport.txt b/Documentation/input/joystick-parport.txt index ede5f33daad..1c856f32ff2 100644 --- a/Documentation/input/joystick-parport.txt +++ b/Documentation/input/joystick-parport.txt @@ -2,7 +2,6 @@ (c) 1998-2000 Vojtech Pavlik <vojtech@ucw.cz> (c) 1998 Andree Borrmann <a.borrmann@tu-bs.de> Sponsored by SuSE - $Id: joystick-parport.txt,v 1.6 2001/09/25 09:31:32 vojtech Exp $ ---------------------------------------------------------------------------- 0. Disclaimer diff --git a/Documentation/input/joystick.txt b/Documentation/input/joystick.txt index 389de9bd987..154d767b2ac 100644 --- a/Documentation/input/joystick.txt +++ b/Documentation/input/joystick.txt @@ -1,7 +1,6 @@ Linux Joystick driver v2.0.0 (c) 1996-2000 Vojtech Pavlik <vojtech@ucw.cz> Sponsored by SuSE - $Id: joystick.txt,v 1.12 2002/03/03 12:13:07 jdeneux Exp $ ---------------------------------------------------------------------------- 0. Disclaimer diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e4ef2758440..30d44b78171 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1206,7 +1206,7 @@ and is between 256 and 4096 characters. It is defined in the file or memmap=0x10000$0x18690000 - memtest= [KNL,X86_64] Enable memtest + memtest= [KNL,X86] Enable memtest Format: <integer> range: 0,4 : pattern number default : 0 <disable> @@ -2165,6 +2165,10 @@ and is between 256 and 4096 characters. It is defined in the file Note that genuine overcurrent events won't be reported either. + unknown_nmi_panic + [X86-32,X86-64] + Set unknown_nmi_panic=1 early on boot. + usbcore.autosuspend= [USB] The autosuspend time delay (in seconds) used for newly-detected USB devices (default 2). This diff --git a/Documentation/md.txt b/Documentation/md.txt index a8b43062747..1da9d1b1793 100644 --- a/Documentation/md.txt +++ b/Documentation/md.txt @@ -236,6 +236,11 @@ All md devices contain: writing the word for the desired state, however some states cannot be explicitly set, and some transitions are not allowed. + Select/poll works on this file. All changes except between + active_idle and active (which can be frequent and are not + very interesting) are notified. active->active_idle is + reported if the metadata is externally managed. + clear No devices, no size, no level Writing is equivalent to STOP_ARRAY ioctl @@ -292,6 +297,10 @@ Each directory contains: writemostly - device will only be subject to read requests if there are no other options. This applies only to raid1 arrays. + blocked - device has failed, metadata is "external", + and the failure hasn't been acknowledged yet. + Writes that would write to this device if + it were not faulty are blocked. spare - device is working, but not a full member. This includes spares that are in the process of being recovered to @@ -301,6 +310,12 @@ Each directory contains: Writing "remove" removes the device from the array. Writing "writemostly" sets the writemostly flag. Writing "-writemostly" clears the writemostly flag. + Writing "blocked" sets the "blocked" flag. + Writing "-blocked" clear the "blocked" flag and allows writes + to complete. + + This file responds to select/poll. Any change to 'faulty' + or 'blocked' causes an event. errors An approximate count of read errors that have been detected on @@ -332,7 +347,7 @@ Each directory contains: for storage of data. This will normally be the same as the component_size. This can be written while assembling an array. If a value less than the current component_size is - written, component_size will be reduced to this value. + written, it will be rejected. An active md device will also contain and entry for each active device @@ -381,6 +396,19 @@ also have 'check' and 'repair' will start the appropriate process providing the current state is 'idle'. + This file responds to select/poll. Any important change in the value + triggers a poll event. Sometimes the value will briefly be + "recover" if a recovery seems to be needed, but cannot be + achieved. In that case, the transition to "recover" isn't + notified, but the transition away is. + + degraded + This contains a count of the number of devices by which the + arrays is degraded. So an optimal array with show '0'. A + single failed/missing drive will show '1', etc. + This file responds to select/poll, any increase or decrease + in the count of missing devices will trigger an event. + mismatch_count When performing 'check' and 'repair', and possibly when performing 'resync', md will count the number of errors that are diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index aee243a846a..ea1b70b3579 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -89,10 +89,12 @@ Table of Contents 3) OpenPIC Interrupt Controllers 4) ISA Interrupt Controllers - VIII - Specifying GPIO information for devices + IX - Specifying GPIO information for devices 1) gpios property 2) gpio-controller nodes + X - Specifying device power management information (sleep property) + Appendix A - Sample SOC node for MPC8540 @@ -2488,8 +2490,8 @@ encodings listed below: 2 = high to low edge sensitive type enabled 3 = low to high edge sensitive type enabled -VIII - Specifying GPIO information for devices -============================================== +IX - Specifying GPIO information for devices +============================================ 1) gpios property ----------------- @@ -2537,116 +2539,151 @@ Example of two SOC GPIO banks defined as gpio-controller nodes: gpio-controller; }; +X - Specifying Device Power Management Information (sleep property) +=================================================================== + +Devices on SOCs often have mechanisms for placing devices into low-power +states that are decoupled from the devices' own register blocks. Sometimes, +this information is more complicated than a cell-index property can +reasonably describe. Thus, each device controlled in such a manner +may contain a "sleep" property which describes these connections. + +The sleep property consists of one or more sleep resources, each of +which consists of a phandle to a sleep controller, followed by a +controller-specific sleep specifier of zero or more cells. + +The semantics of what type of low power modes are possible are defined +by the sleep controller. Some examples of the types of low power modes +that may be supported are: + + - Dynamic: The device may be disabled or enabled at any time. + - System Suspend: The device may request to be disabled or remain + awake during system suspend, but will not be disabled until then. + - Permanent: The device is disabled permanently (until the next hard + reset). + +Some devices may share a clock domain with each other, such that they should +only be suspended when none of the devices are in use. Where reasonable, +such nodes should be placed on a virtual bus, where the bus has the sleep +property. If the clock domain is shared among devices that cannot be +reasonably grouped in this manner, then create a virtual sleep controller +(similar to an interrupt nexus, except that defining a standardized +sleep-map should wait until its necessity is demonstrated). + Appendix A - Sample SOC node for MPC8540 ======================================== -Note that the #address-cells and #size-cells for the SoC node -in this example have been explicitly listed; these are likely -not necessary as they are usually the same as the root node. - - soc8540@e0000000 { + soc@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; + compatible = "fsl,mpc8540-ccsr", "simple-bus"; device_type = "soc"; - ranges = <00000000 e0000000 00100000> - reg = <e0000000 00003000>; + ranges = <0x00000000 0xe0000000 0x00100000> bus-frequency = <0>; - - mdio@24520 { - reg = <24520 20>; - device_type = "mdio"; - compatible = "gianfar"; - - ethernet-phy@0 { - linux,phandle = <2452000> - interrupt-parent = <40000>; - interrupts = <35 1>; - reg = <0>; - device_type = "ethernet-phy"; - }; - - ethernet-phy@1 { - linux,phandle = <2452001> - interrupt-parent = <40000>; - interrupts = <35 1>; - reg = <1>; - device_type = "ethernet-phy"; - }; - - ethernet-phy@3 { - linux,phandle = <2452002> - interrupt-parent = <40000>; - interrupts = <35 1>; - reg = <3>; - device_type = "ethernet-phy"; - }; - - }; + interrupt-parent = <&pic>; ethernet@24000 { - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <1>; device_type = "network"; model = "TSEC"; - compatible = "gianfar"; - reg = <24000 1000>; - mac-address = [ 00 E0 0C 00 73 00 ]; - interrupts = <d 3 e 3 12 3>; - interrupt-parent = <40000>; - phy-handle = <2452000>; + compatible = "gianfar", "simple-bus"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <29 2 30 2 34 2>; + phy-handle = <&phy0>; + sleep = <&pmc 00000080>; + ranges; + + mdio@24520 { + reg = <0x24520 0x20>; + compatible = "fsl,gianfar-mdio"; + + phy0: ethernet-phy@0 { + interrupts = <5 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + + phy1: ethernet-phy@1 { + interrupts = <5 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + + phy3: ethernet-phy@3 { + interrupts = <7 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; }; ethernet@25000 { - #address-cells = <1>; - #size-cells = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <25000 1000>; - mac-address = [ 00 E0 0C 00 73 01 ]; - interrupts = <13 3 14 3 18 3>; - interrupt-parent = <40000>; - phy-handle = <2452001>; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + phy-handle = <&phy1>; + sleep = <&pmc 00000040>; }; ethernet@26000 { - #address-cells = <1>; - #size-cells = <0>; device_type = "network"; model = "FEC"; compatible = "gianfar"; - reg = <26000 1000>; - mac-address = [ 00 E0 0C 00 73 02 ]; - interrupts = <19 3>; - interrupt-parent = <40000>; - phy-handle = <2452002>; + reg = <0x26000 0x1000>; + local-mac-address = [ 00 E0 0C 00 73 02 ]; + interrupts = <41 2>; + phy-handle = <&phy3>; + sleep = <&pmc 00000020>; }; serial@4500 { - device_type = "serial"; - compatible = "ns16550"; - reg = <4500 100>; - clock-frequency = <0>; - interrupts = <1a 3>; - interrupt-parent = <40000>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8540-duart", "simple-bus"; + sleep = <&pmc 00000002>; + ranges; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + }; }; - pic@40000 { - linux,phandle = <40000>; + pic: pic@40000 { interrupt-controller; #address-cells = <0>; - reg = <40000 40000>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; }; i2c@3000 { - interrupt-parent = <40000>; - interrupts = <1b 3>; - reg = <3000 18>; - device_type = "i2c"; + interrupts = <43 2>; + reg = <0x3000 0x100>; compatible = "fsl-i2c"; dfsrr; + sleep = <&pmc 00000004>; }; + pmc: power@e0070 { + compatible = "fsl,mpc8540-pmc", "fsl,mpc8548-pmc"; + reg = <0xe0070 0x20>; + }; }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt new file mode 100644 index 00000000000..1815dfede1b --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt @@ -0,0 +1,38 @@ +Every GPIO controller node must have #gpio-cells property defined, +this information will be used to translate gpio-specifiers. + +On CPM1 devices, all ports are using slightly different register layouts. +Ports A, C and D are 16bit ports and Ports B and E are 32bit ports. + +On CPM2 devices, all ports are 32bit ports and use a common register layout. + +Required properties: +- compatible : "fsl,cpm1-pario-bank-a", "fsl,cpm1-pario-bank-b", + "fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d", + "fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank" +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify optional paramters (currently unused). +- gpio-controller : Marks the port as GPIO controller. + +Example of three SOC GPIO banks defined as gpio-controller nodes: + + CPM1_PIO_A: gpio-controller@950 { + #gpio-cells = <2>; + compatible = "fsl,cpm1-pario-bank-a"; + reg = <0x950 0x10>; + gpio-controller; + }; + + CPM1_PIO_B: gpio-controller@ab8 { + #gpio-cells = <2>; + compatible = "fsl,cpm1-pario-bank-b"; + reg = <0xab8 0x10>; + gpio-controller; + }; + + CPM1_PIO_E: gpio-controller@ac8 { + #gpio-cells = <2>; + compatible = "fsl,cpm1-pario-bank-e"; + reg = <0xac8 0x18>; + gpio-controller; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt index c8f44d6bcbc..9ccd5f30405 100644 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt @@ -1,22 +1,37 @@ -* USB (Universal Serial Bus Controller) +Freescale QUICC Engine USB Controller Required properties: -- compatible : could be "qe_udc" or "fhci-hcd". -- mode : the could be "host" or "slave". -- reg : Offset and length of the register set for the device -- interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. -- interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. +- compatible : should be "fsl,<chip>-qe-usb", "fsl,mpc8323-qe-usb". +- reg : the first two cells should contain usb registers location and + length, the next two two cells should contain PRAM location and + length. +- interrupts : should contain USB interrupt. +- interrupt-parent : interrupt source phandle. +- fsl,fullspeed-clock : specifies the full speed USB clock source: + "none": clock source is disabled + "brg1" through "brg16": clock source is BRG1-BRG16, respectively + "clk1" through "clk24": clock source is CLK1-CLK24, respectively +- fsl,lowspeed-clock : specifies the low speed USB clock source: + "none": clock source is disabled + "brg1" through "brg16": clock source is BRG1-BRG16, respectively + "clk1" through "clk24": clock source is CLK1-CLK24, respectively +- hub-power-budget : USB power budget for the root hub, in mA. +- gpios : should specify GPIOs in this order: USBOE, USBTP, USBTN, USBRP, + USBRN, SPEED (optional), and POWER (optional). -Example(slave): - usb@6c0 { - compatible = "qe_udc"; - reg = <6c0 40>; - interrupts = <8b 0>; - interrupt-parent = <700>; - mode = "slave"; - }; +Example: + +usb@6c0 { + compatible = "fsl,mpc8360-qe-usb", "fsl,mpc8323-qe-usb"; + reg = <0x6c0 0x40 0x8b00 0x100>; + interrupts = <11>; + interrupt-parent = <&qeic>; + fsl,fullspeed-clock = "clk21"; + gpios = <&qe_pio_b 2 0 /* USBOE */ + &qe_pio_b 3 0 /* USBTP */ + &qe_pio_b 8 0 /* USBTN */ + &qe_pio_b 9 0 /* USBRP */ + &qe_pio_b 11 0 /* USBRN */ + &qe_pio_e 20 0 /* SPEED */ + &qe_pio_e 21 0 /* POWER */>; +}; diff --git a/Documentation/powerpc/dts-bindings/fsl/mcu-mpc8349emitx.txt b/Documentation/powerpc/dts-bindings/fsl/mcu-mpc8349emitx.txt new file mode 100644 index 00000000000..0f766333b6e --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/mcu-mpc8349emitx.txt @@ -0,0 +1,17 @@ +Freescale MPC8349E-mITX-compatible Power Management Micro Controller Unit (MCU) + +Required properties: +- compatible : "fsl,<mcu-chip>-<board>", "fsl,mcu-mpc8349emitx". +- reg : should specify I2C address (0x0a). +- #gpio-cells : should be 2. +- gpio-controller : should be present. + +Example: + +mcu@0a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8349emitx", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; +}; diff --git a/Documentation/powerpc/dts-bindings/fsl/pmc.txt b/Documentation/powerpc/dts-bindings/fsl/pmc.txt new file mode 100644 index 00000000000..02f6f43ee1b --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/pmc.txt @@ -0,0 +1,63 @@ +* Power Management Controller + +Properties: +- compatible: "fsl,<chip>-pmc". + + "fsl,mpc8349-pmc" should be listed for any chip whose PMC is + compatible. "fsl,mpc8313-pmc" should also be listed for any chip + whose PMC is compatible, and implies deep-sleep capability. + + "fsl,mpc8548-pmc" should be listed for any chip whose PMC is + compatible. "fsl,mpc8536-pmc" should also be listed for any chip + whose PMC is compatible, and implies deep-sleep capability. + + "fsl,mpc8641d-pmc" should be listed for any chip whose PMC is + compatible; all statements below that apply to "fsl,mpc8548-pmc" also + apply to "fsl,mpc8641d-pmc". + + Compatibility does not include bit assigments in SCCR/PMCDR/DEVDISR; these + bit assigments are indicated via the sleep specifier in each device's + sleep property. + +- reg: For devices compatible with "fsl,mpc8349-pmc", the first resource + is the PMC block, and the second resource is the Clock Configuration + block. + + For devices compatible with "fsl,mpc8548-pmc", the first resource + is a 32-byte block beginning with DEVDISR. + +- interrupts: For "fsl,mpc8349-pmc"-compatible devices, the first + resource is the PMC block interrupt. + +- fsl,mpc8313-wakeup-timer: For "fsl,mpc8313-pmc"-compatible devices, + this is a phandle to an "fsl,gtm" node on which timer 4 can be used as + a wakeup source from deep sleep. + +Sleep specifiers: + + fsl,mpc8349-pmc: Sleep specifiers consist of one cell. For each bit + that is set in the cell, the corresponding bit in SCCR will be saved + and cleared on suspend, and restored on resume. This sleep controller + supports disabling and resuming devices at any time. + + fsl,mpc8536-pmc: Sleep specifiers consist of three cells, the third of + which will be ORed into PMCDR upon suspend, and cleared from PMCDR + upon resume. The first two cells are as described for fsl,mpc8578-pmc. + This sleep controller only supports disabling devices during system + sleep, or permanently. + + fsl,mpc8548-pmc: Sleep specifiers consist of one or two cells, the + first of which will be ORed into DEVDISR (and the second into + DEVDISR2, if present -- this cell should be zero or absent if the + hardware does not have DEVDISR2) upon a request for permanent device + disabling. This sleep controller does not support configuring devices + to disable during system sleep (unless supported by another compatible + match), or dynamically. + +Example: + + power@b00 { + compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 8>; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/tsec.txt b/Documentation/powerpc/dts-bindings/fsl/tsec.txt index 583ef6b56c4..cf55fa4112d 100644 --- a/Documentation/powerpc/dts-bindings/fsl/tsec.txt +++ b/Documentation/powerpc/dts-bindings/fsl/tsec.txt @@ -24,46 +24,39 @@ Example: * Gianfar-compatible ethernet nodes -Required properties: +Properties: - device_type : Should be "network" - model : Model of the device. Can be "TSEC", "eTSEC", or "FEC" - compatible : Should be "gianfar" - reg : Offset and length of the register set for the device - - mac-address : List of bytes representing the ethernet address of + - local-mac-address : List of bytes representing the ethernet address of this controller - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. + - interrupts : For FEC devices, the first interrupt is the device's + interrupt. For TSEC and eTSEC devices, the first interrupt is + transmit, the second is receive, and the third is error. - phy-handle : The phandle for the PHY connected to this ethernet controller. - fixed-link : <a b c d e> where a is emulated phy id - choose any, but unique to the all specified fixed-links, b is duplex - 0 half, 1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause. - -Recommended properties: - - phy-connection-type : a string naming the controller/PHY interface type, i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii", "tbi", or "rtbi". This property is only really needed if the connection is of type "rgmii-id", as all other connection types are detected by hardware. - + - fsl,magic-packet : If present, indicates that the hardware supports + waking up via magic packet. Example: ethernet@24000 { - #size-cells = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; - mac-address = [ 00 E0 0C 00 73 00 ]; - interrupts = <d 3 e 3 12 3>; - interrupt-parent = <40000>; - phy-handle = <2452000> + reg = <0x24000 0x1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0> }; diff --git a/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt b/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt new file mode 100644 index 00000000000..84a04d5eb8e --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt @@ -0,0 +1,28 @@ +Freescale Localbus UPM programmed to work with NAND flash + +Required properties: +- compatible : "fsl,upm-nand". +- reg : should specify localbus chip select and size used for the chip. +- fsl,upm-addr-offset : UPM pattern offset for the address latch. +- fsl,upm-cmd-offset : UPM pattern offset for the command latch. +- gpios : may specify optional GPIO connected to the Ready-Not-Busy pin. + +Example: + +upm@1,0 { + compatible = "fsl,upm-nand"; + reg = <1 0 1>; + fsl,upm-addr-offset = <16>; + fsl,upm-cmd-offset = <8>; + gpios = <&qe_pio_e 18 0>; + + flash { + #address-cells = <1>; + #size-cells = <1>; + compatible = "..."; + + partition@0 { + ... + }; + }; +}; diff --git a/Documentation/powerpc/dts-bindings/gpio/led.txt b/Documentation/powerpc/dts-bindings/gpio/led.txt new file mode 100644 index 00000000000..ff51f4c0fa9 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/gpio/led.txt @@ -0,0 +1,15 @@ +LED connected to GPIO + +Required properties: +- compatible : should be "gpio-led". +- label : (optional) the label for this LED. If omitted, the label is + taken from the node name (excluding the unit address). +- gpios : should specify LED GPIO. + +Example: + +led@0 { + compatible = "gpio-led"; + label = "hdd"; + gpios = <&mcu_pio 0 1>; +}; diff --git a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl b/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl index c4d2e3507af..9d644f7e241 100644 --- a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl +++ b/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl @@ -42,7 +42,7 @@ <sect1><title>Device Components</title> !Esound/core/device.c </sect1> - <sect1><title>KMOD and Device File Entries</title> + <sect1><title>Module requests and Device File Entries</title> !Esound/core/sound.c </sect1> <sect1><title>Memory Management Helpers</title> diff --git a/Documentation/specialix.txt b/Documentation/specialix.txt index 4a4b428ce8f..6eb6f3a3331 100644 --- a/Documentation/specialix.txt +++ b/Documentation/specialix.txt @@ -270,8 +270,8 @@ The pinout of the connectors on the IO8+ is: Hardware handshaking issues. ============================ -The driver can be compiled in two different ways. The default -("Specialix DTR/RTS pin is RTS" is off) the pin behaves as DTR when +The driver can be told to operate in two different ways. The default +behaviour is specialix.sx_rtscts = 0 where the pin behaves as DTR when hardware handshaking is off. It behaves as the RTS hardware handshaking signal when hardware handshaking is selected. @@ -280,7 +280,7 @@ cable will either be compatible with hardware handshaking or with software handshaking. So switching on the fly is not really an option. -I actually prefer to use the "Specialix DTR/RTS pin is RTS" option. +I actually prefer to use the "specialix.sx_rtscts=1" option. This makes the DTR/RTS pin always an RTS pin, and ioctls to change DTR are always ignored. I have a cable that is configured for this. @@ -379,7 +379,5 @@ it doesn't fit in your computer, bring back the card. You have to WRITE to the address register to even read-probe a CD186x register. Disable autodetection? -- Specialix: any suggestions? - - Arbitrary baud rates are not implemented yet. - If you need this, bug me about it. diff --git a/Documentation/sysfs-rules.txt b/Documentation/sysfs-rules.txt index 80ef562160b..6049a2a84dd 100644 --- a/Documentation/sysfs-rules.txt +++ b/Documentation/sysfs-rules.txt @@ -3,9 +3,8 @@ Rules on how to access information in the Linux kernel sysfs The kernel-exported sysfs exports internal kernel implementation details and depends on internal kernel structures and layout. It is agreed upon by the kernel developers that the Linux kernel does not provide a stable -internal API. As sysfs is a direct export of kernel internal -structures, the sysfs interface cannot provide a stable interface either; -it may always change along with internal kernel changes. +internal API. Therefore, there are aspects of the sysfs interface that +may not be stable across kernel releases. To minimize the risk of breaking users of sysfs, which are in most cases low-level userspace applications, with a new kernel release, the users diff --git a/Documentation/telephony/ixj.txt b/Documentation/telephony/ixj.txt index 621024fd3a1..44d124005ba 100644 --- a/Documentation/telephony/ixj.txt +++ b/Documentation/telephony/ixj.txt @@ -305,21 +305,14 @@ driver, like this: which will result in the needed drivers getting loaded automatically. - g. if you are planning on using kerneld to automatically load the -module for you, then you need to edit /etc/conf.modules and add the + g. if you are planning on having the kernel automatically request +the module for you, then you need to edit /etc/conf.modules and add the following lines: options ixj dspio=0x340 xio=0x330 ixjdebug=0 If you do this, then when you execute an application that uses the -module kerneld will load the module for you. Note that to do this, -you need to have your kernel set to support kerneld. You can check -for this by looking at /usr/src/linux/.config and you should see this: - - # Loadable module support - # - <snip> - CONFIG_KMOD=y +module the kernel will request that it is loaded. h. if you want non-root users to be able to read and write to the ixj devices (this is a good idea!) you should do the following: diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt index 815f5c2301f..9b22bd14c34 100644 --- a/Documentation/usb/gadget_serial.txt +++ b/Documentation/usb/gadget_serial.txt @@ -1,6 +1,7 @@ Linux Gadget Serial Driver v2.0 11/20/2004 + (updated 8-May-2008 for v2.3) License and Disclaimer @@ -31,7 +32,7 @@ Prerequisites ------------- Versions of the gadget serial driver are available for the 2.4 Linux kernels, but this document assumes you are using -version 2.0 or later of the gadget serial driver in a 2.6 +version 2.3 or later of the gadget serial driver in a 2.6 Linux kernel. This document assumes that you are familiar with Linux and @@ -40,6 +41,12 @@ standard utilities, use minicom and HyperTerminal, and work with USB and serial devices. It also assumes you configure the Linux gadget and usb drivers as modules. +With version 2.3 of the driver, major and minor device nodes are +no longer statically defined. Your Linux based system should mount +sysfs in /sys, and use "mdev" (in Busybox) or "udev" to make the +/dev nodes matching the sysfs /sys/class/tty files. + + Overview -------- @@ -104,15 +111,8 @@ driver. All this are listed under "USB Gadget Support" when configuring the kernel. Then rebuild and install the kernel or modules. -The gadget serial driver uses major number 127, for now. So you -will need to create a device node for it, like this: - - mknod /dev/ttygserial c 127 0 - -You only need to do this once. - Then you must load the gadget serial driver. To load it as an -ACM device, do this: +ACM device (recommended for interoperability), do this: modprobe g_serial use_acm=1 @@ -125,6 +125,23 @@ controller driver. This must be done each time you reboot the gadget side Linux system. You can add this to the start up scripts, if desired. +Your system should use mdev (from busybox) or udev to make the +device nodes. After this gadget driver has been set up you should +then see a /dev/ttyGS0 node: + + # ls -l /dev/ttyGS0 | cat + crw-rw---- 1 root root 253, 0 May 8 14:10 /dev/ttyGS0 + # + +Note that the major number (253, above) is system-specific. If +you need to create /dev nodes by hand, the right numbers to use +will be in the /sys/class/tty/ttyGS0/dev file. + +When you link this gadget driver early, perhaps even statically, +you may want to set up an /etc/inittab entry to run "getty" on it. +The /dev/ttyGS0 line should work like most any other serial port. + + If gadget serial is loaded as an ACM device you will want to use either the Windows or Linux ACM driver on the host side. If gadget serial is loaded as a bulk in/out device, you will want to use the diff --git a/Documentation/usb/persist.txt b/Documentation/usb/persist.txt index d56cb1a1155..074b159b77c 100644 --- a/Documentation/usb/persist.txt +++ b/Documentation/usb/persist.txt @@ -81,8 +81,11 @@ re-enumeration shows that the device now attached to that port has the same descriptors as before, including the Vendor and Product IDs, then the kernel continues to use the same device structure. In effect, the kernel treats the device as though it had merely been reset instead of -unplugged. The same thing happens if the host controller is in the -expected state but a USB device was unplugged and then replugged. +unplugged. + +The same thing happens if the host controller is in the expected state +but a USB device was unplugged and then replugged, or if a USB device +fails to carry out a normal resume. If no device is now attached to the port, or if the descriptors are different from what the kernel remembers, then the treatment is what diff --git a/Documentation/usb/uhci.txt b/Documentation/usb/uhci.txt deleted file mode 100644 index 2f25952c86c..00000000000 --- a/Documentation/usb/uhci.txt +++ /dev/null @@ -1,165 +0,0 @@ -Specification and Internals for the New UHCI Driver (Whitepaper...) - - brought to you by - - Georg Acher, acher@in.tum.de (executive slave) (base guitar) - Deti Fliegl, deti@fliegl.de (executive slave) (lead voice) - Thomas Sailer, sailer@ife.ee.ethz.ch (chief consultant) (cheer leader) - - $Id: README.uhci,v 1.1 1999/12/14 14:03:02 fliegl Exp $ - -This document and the new uhci sources can be found on - http://hotswap.in.tum.de/usb - -1. General issues - -1.1 Why a new UHCI driver, we already have one?!? - -Correct, but its internal structure got more and more mixed up by the (still -ongoing) efforts to get isochronous transfers (ISO) to work. -Since there is an increasing need for reliable ISO-transfers (especially -for USB-audio needed by TS and for a DAB-USB-Receiver build by GA and DF), -this state was a bit unsatisfying in our opinion, so we've decided (based -on knowledge and experiences with the old UHCI driver) to start -from scratch with a new approach, much simpler but at the same time more -powerful. -It is inspired by the way Win98/Win2000 handles USB requests via URBs, -but it's definitely 100% free of MS-code and doesn't crash while -unplugging an used ISO-device like Win98 ;-) -Some code for HW setup and root hub management was taken from the -original UHCI driver, but heavily modified to fit into the new code. -The invention of the basic concept, and major coding were completed in two -days (and nights) on the 16th and 17th of October 1999, now known as the -great USB-October-Revolution started by GA, DF, and TS ;-) - -Since the concept is in no way UHCI dependent, we hope that it will also be -transferred to the OHCI-driver, so both drivers share a common API. - -1.2. Advantages and disadvantages - -+ All USB transfer types work now! -+ Asynchronous operation -+ Simple, but powerful interface (only two calls for start and cancel) -+ Easy migration to the new API, simplified by a compatibility API -+ Simple usage of ISO transfers -+ Automatic linking of requests -+ ISO transfers allow variable length for each frame and striping -+ No CPU dependent and non-portable atomic memory access, no asm()-inlines -+ Tested on x86 and Alpha - -- Rewriting for ISO transfers needed - -1.3. Is there some compatibility to the old API? - -Yes, but only for control, bulk and interrupt transfers. We've implemented -some wrapper calls for these transfer types. The usbcore works fine with -these wrappers. For ISO there's no compatibility, because the old ISO-API -and its semantics were unnecessary complicated in our opinion. - -1.4. What's really working? - -As said above, CTRL and BULK already work fine even with the wrappers, -so legacy code wouldn't notice the change. -Regarding to Thomas, ISO transfers now run stable with USB audio. -INT transfers (e.g. mouse driver) work fine, too. - -1.5. Are there any bugs? - -No ;-) -Hm... -Well, of course this implementation needs extensive testing on all available -hardware, but we believe that any fixes shouldn't harm the overall concept. - -1.6. What should be done next? - -A large part of the request handling seems to be identical for UHCI and -OHCI, so it would be a good idea to extract the common parts and have only -the HW specific stuff in uhci.c. Furthermore, all other USB device drivers -should need URBification, if they use isochronous or interrupt transfers. -One thing missing in the current implementation (and the old UHCI driver) -is fair queueing for BULK transfers. Since this would need (in principle) -the alteration of already constructed TD chains (to switch from depth to -breadth execution), another way has to be found. Maybe some simple -heuristics work with the same effect. - ---------------------------------------------------------------------------- - -2. Internal structure and mechanisms - -To get quickly familiar with the internal structures, here's a short -description how the new UHCI driver works. However, the ultimate source of -truth is only uhci.c! - -2.1. Descriptor structure (QHs and TDs) - -During initialization, the following skeleton is allocated in init_skel: - - framespecific | common chain - -framelist[] -[ 0 ]-----> TD --> TD -------\ -[ 1 ]-----> TD --> TD --------> TD ----> QH -------> QH -------> QH ---> NULL - ... TD --> TD -------/ -[1023]-----> TD --> TD ------/ - - ^^ ^^ ^^ ^^ ^^ ^^ - 1024 TDs for 7 TDs for 1 TD for Start of Start of End Chain - ISO INT (2-128ms) 1ms-INT CTRL Chain BULK Chain - -For each CTRL or BULK transfer a new QH is allocated and the containing data -transfers are appended as (vertical) TDs. After building the whole QH with its -dangling TDs, the QH is inserted before the BULK Chain QH (for CTRL) or -before the End Chain QH (for BULK). Since only the QH->next pointers are -affected, no atomic memory operation is required. The three QHs in the -common chain are never equipped with TDs! - -For ISO or INT, the TD for each frame is simply inserted into the appropriate -ISO/INT-TD-chain for the desired frame. The 7 skeleton INT-TDs are scattered -among the 1024 frames similar to the old UHCI driver. - -For CTRL/BULK/ISO, the last TD in the transfer has the IOC-bit set. For INT, -every TD (there is only one...) has the IOC-bit set. - -Besides the data for the UHCI controller (2 or 4 32bit words), the descriptors -are double-linked through the .vertical and .horizontal elements in the -SW data of the descriptor (using the double-linked list structures and -operations), but SW-linking occurs only in closed domains, i.e. for each of -the 1024 ISO-chains and the 8 INT-chains there is a closed cycle. This -simplifies all insertions and unlinking operations and avoids costly -bus_to_virt()-calls. - -2.2. URB structure and linking to QH/TDs - -During assembly of the QH and TDs of the requested action, these descriptors -are stored in urb->urb_list, so the allocated QH/TD descriptors are bound to -this URB. -If the assembly was successful and the descriptors were added to the HW chain, -the corresponding URB is inserted into a global URB list for this controller. -This list stores all pending URBs. - -2.3. Interrupt processing - -Since UHCI provides no means to directly detect completed transactions, the -following is done in each UHCI interrupt (uhci_interrupt()): - -For each URB in the pending queue (process_urb()), the ACTIVE-flag of the -associated TDs are processed (depending on the transfer type -process_{transfer|interrupt|iso}()). If the TDs are not active anymore, -they indicate the completion of the transaction and the status is calculated. -Inactive QH/TDs are removed from the HW chain (since the host controller -already removed the TDs from the QH, no atomic access is needed) and -eventually the URB is marked as completed (OK or errors) and removed from the -pending queue. Then the next linked URB is submitted. After (or immediately -before) that, the completion handler is called. - -2.4. Unlinking URBs - -First, all QH/TDs stored in the URB are unlinked from the HW chain. -To ensure that the host controller really left a vertical TD chain, we -wait for one frame. After that, the TDs are physically destroyed. - -2.5. URB linking and the consequences - -Since URBs can be linked and the corresponding submit_urb is called in -the UHCI-interrupt, all work associated with URB/QH/TD assembly has to be -interrupt save. This forces kmalloc to use GFP_ATOMIC in the interrupt. diff --git a/Documentation/video4linux/w9968cf.txt b/Documentation/video4linux/w9968cf.txt index e0bba8393c7..05138e8aea0 100644 --- a/Documentation/video4linux/w9968cf.txt +++ b/Documentation/video4linux/w9968cf.txt @@ -193,9 +193,6 @@ Description: Automatic 'ovcamchip' module loading: 0 disabled, 1 enabled. loads that module automatically. This action is performed as once soon as the 'w9968cf' module is loaded into memory. Default: 1 -Note: The kernel must be compiled with the CONFIG_KMOD option - enabled for the 'ovcamchip' module to be loaded and for - this parameter to be present. ------------------------------------------------------------------------------- Name: simcams Type: int |