diff options
Diffstat (limited to 'Documentation')
9 files changed, 205 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt new file mode 100644 index 00000000000..780d0392a66 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt @@ -0,0 +1,20 @@ +Trusted Foundations +------------------- + +Boards that use the Trusted Foundations secure monitor can signal its +presence by declaring a node compatible with "tlm,trusted-foundations" +under the /firmware/ node + +Required properties: +- compatible: "tlm,trusted-foundations" +- tlm,version-major: major version number of Trusted Foundations firmware +- tlm,version-minor: minor version number of Trusted Foundations firmware + +Example: + firmware { + trusted-foundations { + compatible = "tlm,trusted-foundations"; + tlm,version-major = <2>; + tlm,version-minor = <8>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt index ed9c8533443..558ed4b4ef3 100644 --- a/Documentation/devicetree/bindings/arm/tegra.txt +++ b/Documentation/devicetree/bindings/arm/tegra.txt @@ -32,3 +32,8 @@ board-specific compatible values: nvidia,whistler toradex,colibri_t20-512 toradex,iris + +Trusted Foundations +------------------------------------------- +Tegra supports the Trusted Foundation secure monitor. See the +"tlm,trusted-foundations" binding's documentation for more details. diff --git a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt index 9989eda755d..c9cf605bb99 100644 --- a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt +++ b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt @@ -29,3 +29,8 @@ pic: pic@14000000 { clear-mask = <0xffffffff>; valid-mask = <0x003fffff>; }; + +Optional properties: +- interrupts: if the FPGA IRQ controller is cascaded, i.e. if its IRQ + output is simply connected to the input of another IRQ controller, + then the parent IRQ shall be specified in this property. diff --git a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt new file mode 100644 index 00000000000..f2aab3dc2b5 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt @@ -0,0 +1,68 @@ +* Atmel HW cryptographic accelerators + +These are the HW cryptographic accelerators found on some Atmel products. + +* Advanced Encryption Standard (AES) + +Required properties: +- compatible : Should be "atmel,at91sam9g46-aes". +- reg: Should contain AES registers location and length. +- interrupts: Should contain the IRQ line for the AES. +- dmas: List of two DMA specifiers as described in + atmel-dma.txt and dma.txt files. +- dma-names: Contains one identifier string for each DMA specifier + in the dmas property. + +Example: +aes@f8038000 { + compatible = "atmel,at91sam9g46-aes"; + reg = <0xf8038000 0x100>; + interrupts = <43 4 0>; + dmas = <&dma1 2 18>, + <&dma1 2 19>; + dma-names = "tx", "rx"; + +* Triple Data Encryption Standard (Triple DES) + +Required properties: +- compatible : Should be "atmel,at91sam9g46-tdes". +- reg: Should contain TDES registers location and length. +- interrupts: Should contain the IRQ line for the TDES. + +Optional properties: +- dmas: List of two DMA specifiers as described in + atmel-dma.txt and dma.txt files. +- dma-names: Contains one identifier string for each DMA specifier + in the dmas property. + +Example: +tdes@f803c000 { + compatible = "atmel,at91sam9g46-tdes"; + reg = <0xf803c000 0x100>; + interrupts = <44 4 0>; + dmas = <&dma1 2 20>, + <&dma1 2 21>; + dma-names = "tx", "rx"; +}; + +* Secure Hash Algorithm (SHA) + +Required properties: +- compatible : Should be "atmel,at91sam9g46-sha". +- reg: Should contain SHA registers location and length. +- interrupts: Should contain the IRQ line for the SHA. + +Optional properties: +- dmas: One DMA specifiers as described in + atmel-dma.txt and dma.txt files. +- dma-names: Contains one identifier string for each DMA specifier + in the dmas property. Only one "tx" string needed. + +Example: +sha@f8034000 { + compatible = "atmel,at91sam9g46-sha"; + reg = <0xf8034000 0x100>; + interrupts = <42 4 0>; + dmas = <&dma1 2 17>; + dma-names = "tx"; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt new file mode 100644 index 00000000000..a2e839d6e33 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt @@ -0,0 +1,41 @@ +Davinci GPIO controller bindings + +Required Properties: +- compatible: should be "ti,dm6441-gpio" + +- reg: Physical base address of the controller and the size of memory mapped + registers. + +- gpio-controller : Marks the device node as a gpio controller. + +- interrupt-parent: phandle of the parent interrupt controller. + +- interrupts: Array of GPIO interrupt number. Only banked or unbanked IRQs are + supported at a time. + +- ti,ngpio: The number of GPIO pins supported. + +- ti,davinci-gpio-unbanked: The number of GPIOs that have an individual interrupt + line to processor. + +The GPIO controller also acts as an interrupt controller. It uses the default +two cells specifier as described in Documentation/devicetree/bindings/ +interrupt-controller/interrupts.txt. + +Example: + +gpio: gpio@1e26000 { + compatible = "ti,dm6441-gpio"; + gpio-controller; + reg = <0x226000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <42 IRQ_TYPE_EDGE_BOTH 43 IRQ_TYPE_EDGE_BOTH + 44 IRQ_TYPE_EDGE_BOTH 45 IRQ_TYPE_EDGE_BOTH + 46 IRQ_TYPE_EDGE_BOTH 47 IRQ_TYPE_EDGE_BOTH + 48 IRQ_TYPE_EDGE_BOTH 49 IRQ_TYPE_EDGE_BOTH + 50 IRQ_TYPE_EDGE_BOTH>; + ti,ngpio = <144>; + ti,davinci-gpio-unbanked = <0>; + interrupt-controller; + #interrupt-cells = <2>; +}; diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index c65f71cfaa5..1a1ac2e560e 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -40,6 +40,7 @@ fsl,sgtl5000 SGTL5000: Ultra Low-Power Audio Codec gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz) +isl,isl12057 Intersil ISL12057 I2C RTC Chip maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface diff --git a/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt new file mode 100644 index 00000000000..7cb9dbf3487 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt @@ -0,0 +1,17 @@ +* sun4i/sun7i Real Time Clock + +RTC controller for the Allwinner A10/A20 + +Required properties: +- compatible : Should be "allwinner,sun4i-rtc" or "allwinner,sun7i-a20-rtc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: IRQ line for the RTC. + +Example: + +rtc: rtc@01c20d00 { + compatible = "allwinner,sun4i-rtc"; + reg = <0x01c20d00 0x20>; + interrupts = <24>; +}; diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt new file mode 100644 index 00000000000..f372cf29068 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -0,0 +1,46 @@ +* Renesas SH-Mobile Serial Communication Interface + +Required properties: + + - compatible: Must contain one of the following: + + - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. + - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART. + - "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART. + - "renesas,hscif-r8a7790" for R8A7790 (R-Car H2) HSCIF compatible UART. + - "renesas,scif-r8a7791" for R8A7791 (R-Car M2) SCIF compatible UART. + - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2) SCIFA compatible UART. + - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2) SCIFB compatible UART. + - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2) HSCIF compatible UART. + - "renesas,scif" for generic SCIF compatible UART. + - "renesas,scifa" for generic SCIFA compatible UART. + - "renesas,scifb" for generic SCIFB compatible UART. + - "renesas,hscif" for generic HSCIF compatible UART. + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first followed by the + generic version. + + - reg: Base address and length of the I/O registers used by the UART. + - interrupts: Must contain an interrupt-specifier for the SCIx interrupt. + + - clocks: Must contain a phandle and clock-specifier pair for each entry + in clock-names. + - clock-names: Must contain "sci_ick" for the SCIx UART interface clock. + +Note: Each enabled SCIx UART should have an alias correctly numbered in the +"aliases" node. + +Example: + aliases { + serial0 = &scifa0; + }; + + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic"; + reg = <0 0xe6c40000 0 64>; + interrupt-parent = <&gic>; + interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; + clock-names = "sci_ick"; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index f29cd78b669..ff415d18335 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -40,6 +40,7 @@ ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. img Imagination Technologies Ltd. intercontrol Inter Control Group +isl Intersil lg LG Corporation linux Linux-specific binding lsi LSI Corp. (LSI Logic) @@ -74,6 +75,7 @@ st STMicroelectronics ste ST-Ericsson stericsson ST-Ericsson ti Texas Instruments +tlm Trusted Logic Mobility toshiba Toshiba Corporation toumaz Toumaz v3 V3 Semiconductor |