diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/powerpc/booting-without-of.txt | 87 |
1 files changed, 33 insertions, 54 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 07ae2edff7c..ddafbf2fb1f 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -2507,18 +2507,14 @@ sleep-map should wait until its necessity is demonstrated). Appendix A - Sample SOC node for MPC8540 ======================================== -Note that the #address-cells and #size-cells for the SoC node -in this example have been explicitly listed; these are likely -not necessary as they are usually the same as the root node. - - soc8540@e0000000 { + soc@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; + compatible = "fsl,mpc8540-ccsr", "simple-bus"; device_type = "soc"; - ranges = <00000000 e0000000 00100000> - reg = <e0000000 00003000>; + ranges = <0x00000000 0xe0000000 0x00100000> bus-frequency = <0>; + interrupt-parent = <&pic>; ethernet@24000 { #address-cells = <1>; @@ -2526,38 +2522,31 @@ not necessary as they are usually the same as the root node. device_type = "network"; model = "TSEC"; compatible = "gianfar", "simple-bus"; - reg = <24000 1000>; - mac-address = [ 00 E0 0C 00 73 00 ]; - interrupts = <d 3 e 3 12 3>; - interrupt-parent = <40000>; - phy-handle = <2452000>; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <29 2 30 2 34 2>; + phy-handle = <&phy0>; sleep = <&pmc 00000080>; ranges; mdio@24520 { - reg = <24520 20>; + reg = <0x24520 0x20>; compatible = "fsl,gianfar-mdio"; - ethernet-phy@0 { - linux,phandle = <2452000> - interrupt-parent = <40000>; - interrupts = <35 1>; + phy0: ethernet-phy@0 { + interrupts = <5 1>; reg = <0>; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <2452001> - interrupt-parent = <40000>; - interrupts = <35 1>; + phy1: ethernet-phy@1 { + interrupts = <5 1>; reg = <1>; device_type = "ethernet-phy"; }; - ethernet-phy@3 { - linux,phandle = <2452002> - interrupt-parent = <40000>; - interrupts = <35 1>; + phy3: ethernet-phy@3 { + interrupts = <7 1>; reg = <3>; device_type = "ethernet-phy"; }; @@ -2565,30 +2554,24 @@ not necessary as they are usually the same as the root node. }; ethernet@25000 { - #address-cells = <1>; - #size-cells = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <25000 1000>; - mac-address = [ 00 E0 0C 00 73 01 ]; - interrupts = <13 3 14 3 18 3>; - interrupt-parent = <40000>; - phy-handle = <2452001>; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + phy-handle = <&phy1>; sleep = <&pmc 00000040>; }; ethernet@26000 { - #address-cells = <1>; - #size-cells = <0>; device_type = "network"; model = "FEC"; compatible = "gianfar"; - reg = <26000 1000>; - mac-address = [ 00 E0 0C 00 73 02 ]; - interrupts = <19 3>; - interrupt-parent = <40000>; - phy-handle = <2452002>; + reg = <0x26000 0x1000>; + local-mac-address = [ 00 E0 0C 00 73 02 ]; + interrupts = <41 2>; + phy-handle = <&phy3>; sleep = <&pmc 00000020>; }; @@ -2602,36 +2585,32 @@ not necessary as they are usually the same as the root node. serial@4500 { device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <1a 3>; - interrupt-parent = <40000>; + interrupts = <42 2>; }; serial@4600 { device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <1a 3>; - interrupt-parent = <40000>; + interrupts = <42 2>; }; }; - pic@40000 { - linux,phandle = <40000>; + pic: pic@40000 { interrupt-controller; #address-cells = <0>; - reg = <40000 40000>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; }; i2c@3000 { - interrupt-parent = <40000>; - interrupts = <1b 3>; - reg = <3000 18>; - device_type = "i2c"; + interrupts = <43 2>; + reg = <0x3000 0x100>; compatible = "fsl-i2c"; dfsrr; sleep = <&pmc 00000004>; @@ -2639,6 +2618,6 @@ not necessary as they are usually the same as the root node. pmc: power@e0070 { compatible = "fsl,mpc8540-pmc", "fsl,mpc8548-pmc"; - reg = <e0070 20>; + reg = <0xe0070 0x20>; }; }; |