diff options
Diffstat (limited to 'Documentation')
25 files changed, 468 insertions, 156 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss index 0a92a7c93a6..4f29e5f1ebf 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss +++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss @@ -31,3 +31,31 @@ Date: March 2009 Kernel Version: 2.6.30 Contact: iss_storagedev@hp.com Description: A symbolic link to /sys/block/cciss!cXdY + +Where: /sys/bus/pci/devices/<dev>/ccissX/rescan +Date: August 2009 +Kernel Version: 2.6.31 +Contact: iss_storagedev@hp.com +Description: Kicks of a rescan of the controller to discover logical + drive topology changes. + +Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/lunid +Date: August 2009 +Kernel Version: 2.6.31 +Contact: iss_storagedev@hp.com +Description: Displays the 8-byte LUN ID used to address logical + drive Y of controller X. + +Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/raid_level +Date: August 2009 +Kernel Version: 2.6.31 +Contact: iss_storagedev@hp.com +Description: Displays the RAID level of logical drive Y of + controller X. + +Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/usage_count +Date: August 2009 +Kernel Version: 2.6.31 +Contact: iss_storagedev@hp.com +Description: Displays the usage count (number of opens) of logical drive Y + of controller X. diff --git a/Documentation/ABI/testing/sysfs-class-usb_host b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc index 46b66ad1f1b..4e8106f7cfd 100644 --- a/Documentation/ABI/testing/sysfs-class-usb_host +++ b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc @@ -1,4 +1,4 @@ -What: /sys/class/usb_host/usb_hostN/wusb_chid +What: /sys/class/uwb_rc/uwbN/wusbhc/wusb_chid Date: July 2008 KernelVersion: 2.6.27 Contact: David Vrabel <david.vrabel@csr.com> @@ -9,7 +9,7 @@ Description: Set an all zero CHID to stop the host controller. -What: /sys/class/usb_host/usb_hostN/wusb_trust_timeout +What: /sys/class/uwb_rc/uwbN/wusbhc/wusb_trust_timeout Date: July 2008 KernelVersion: 2.6.27 Contact: David Vrabel <david.vrabel@csr.com> diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt index 455d4e6d346..0b33bfe7dde 100644 --- a/Documentation/cgroups/cgroups.txt +++ b/Documentation/cgroups/cgroups.txt @@ -227,7 +227,14 @@ as the path relative to the root of the cgroup file system. Each cgroup is represented by a directory in the cgroup file system containing the following files describing that cgroup: - - tasks: list of tasks (by pid) attached to that cgroup + - tasks: list of tasks (by pid) attached to that cgroup. This list + is not guaranteed to be sorted. Writing a thread id into this file + moves the thread into this cgroup. + - cgroup.procs: list of tgids in the cgroup. This list is not + guaranteed to be sorted or free of duplicate tgids, and userspace + should sort/uniquify the list if this property is required. + Writing a tgid into this file moves all threads with that tgid into + this cgroup. - notify_on_release flag: run the release agent on exit? - release_agent: the path to use for release notifications (this file exists in the top cgroup only) @@ -374,7 +381,7 @@ Now you want to do something with this cgroup. In this directory you can find several files: # ls -notify_on_release tasks +cgroup.procs notify_on_release tasks (plus whatever files added by the attached subsystems) Now attach your shell to this cgroup: diff --git a/Documentation/debugging-via-ohci1394.txt b/Documentation/debugging-via-ohci1394.txt index 59a91e5c690..611f5a5499b 100644 --- a/Documentation/debugging-via-ohci1394.txt +++ b/Documentation/debugging-via-ohci1394.txt @@ -64,14 +64,14 @@ be used to view the printk buffer of a remote machine, even with live update. Bernhard Kaindl enhanced firescope to support accessing 64-bit machines from 32-bit firescope and vice versa: -- ftp://ftp.suse.de/private/bk/firewire/tools/firescope-0.2.2.tar.bz2 +- http://halobates.de/firewire/firescope-0.2.2.tar.bz2 and he implemented fast system dump (alpha version - read README.txt): -- ftp://ftp.suse.de/private/bk/firewire/tools/firedump-0.1.tar.bz2 +- http://halobates.de/firewire/firedump-0.1.tar.bz2 There is also a gdb proxy for firewire which allows to use gdb to access data which can be referenced from symbols found by gdb in vmlinux: -- ftp://ftp.suse.de/private/bk/firewire/tools/fireproxy-0.33.tar.bz2 +- http://halobates.de/firewire/fireproxy-0.33.tar.bz2 The latest version of this gdb proxy (fireproxy-0.34) can communicate (not yet stable) with kgdb over an memory-based communication module (kgdbom). @@ -178,7 +178,7 @@ Step-by-step instructions for using firescope with early OHCI initialization: Notes ----- -Documentation and specifications: ftp://ftp.suse.de/private/bk/firewire/docs +Documentation and specifications: http://halobates.de/firewire/ FireWire is a trademark of Apple Inc. - for more information please refer to: http://en.wikipedia.org/wiki/FireWire diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 89a47b5aff0..bc693fffabe 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -418,6 +418,14 @@ When: 2.6.33 Why: Should be implemented in userspace, policy daemon. Who: Johannes Berg <johannes@sipsolutions.net> +--------------------------- + +What: CONFIG_INOTIFY +When: 2.6.33 +Why: last user (audit) will be converted to the newer more generic + and more easily maintained fsnotify subsystem +Who: Eric Paris <eparis@redhat.com> + ---------------------------- What: lock_policy_rwsem_* and unlock_policy_rwsem_* will not be @@ -451,3 +459,33 @@ Why: OSS sound_core grabs all legacy minors (0-255) of SOUND_MAJOR will also allow making ALSA OSS emulation independent of sound_core. The dependency will be broken then too. Who: Tejun Heo <tj@kernel.org> + +---------------------------- + +What: Support for VMware's guest paravirtuliazation technique [VMI] will be + dropped. +When: 2.6.37 or earlier. +Why: With the recent innovations in CPU hardware acceleration technologies + from Intel and AMD, VMware ran a few experiments to compare these + techniques to guest paravirtualization technique on VMware's platform. + These hardware assisted virtualization techniques have outperformed the + performance benefits provided by VMI in most of the workloads. VMware + expects that these hardware features will be ubiquitous in a couple of + years, as a result, VMware has started a phased retirement of this + feature from the hypervisor. We will be removing this feature from the + Kernel too. Right now we are targeting 2.6.37 but can retire earlier if + technical reasons (read opportunity to remove major chunk of pvops) + arise. + + Please note that VMI has always been an optimization and non-VMI kernels + still work fine on VMware's platform. + Latest versions of VMware's product which support VMI are, + Workstation 7.0 and VSphere 4.0 on ESX side, future maintainence + releases for these products will continue supporting VMI. + + For more details about VMI retirement take a look at this, + http://blogs.vmware.com/guestosguide/2009/09/vmi-retirement.html + +Who: Alok N Kataria <akataria@vmware.com> + +---------------------------- diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt index 570f9bd9be2..05d5cf1d743 100644 --- a/Documentation/filesystems/ext3.txt +++ b/Documentation/filesystems/ext3.txt @@ -123,10 +123,18 @@ resuid=n The user ID which may use the reserved blocks. sb=n Use alternate superblock at this location. -quota -noquota -grpquota -usrquota +quota These options are ignored by the filesystem. They +noquota are used only by quota tools to recognize volumes +grpquota where quota should be turned on. See documentation +usrquota in the quota-tools package for more details + (http://sourceforge.net/projects/linuxquota). + +jqfmt=<quota type> These options tell filesystem details about quota +usrjquota=<file> so that quota information can be properly updated +grpjquota=<file> during journal replay. They replace the above + quota options. See documentation in the quota-tools + package for more details + (http://sourceforge.net/projects/linuxquota). bh (*) ext3 associates buffer heads to data pages to nobh (a) cache disk block mapping information diff --git a/Documentation/flexible-arrays.txt b/Documentation/flexible-arrays.txt index 84eb26808de..cb8a3a00cc9 100644 --- a/Documentation/flexible-arrays.txt +++ b/Documentation/flexible-arrays.txt @@ -1,5 +1,5 @@ Using flexible arrays in the kernel -Last updated for 2.6.31 +Last updated for 2.6.32 Jonathan Corbet <corbet@lwn.net> Large contiguous memory allocations can be unreliable in the Linux kernel. @@ -40,6 +40,13 @@ argument is passed directly to the internal memory allocation calls. With the current code, using flags to ask for high memory is likely to lead to notably unpleasant side effects. +It is also possible to define flexible arrays at compile time with: + + DEFINE_FLEX_ARRAY(name, element_size, total); + +This macro will result in a definition of an array with the given name; the +element size and total will be checked for validity at compile time. + Storing data into a flexible array is accomplished with a call to: int flex_array_put(struct flex_array *array, unsigned int element_nr, @@ -76,16 +83,30 @@ particular element has never been allocated. Note that it is possible to get back a valid pointer for an element which has never been stored in the array. Memory for array elements is allocated one page at a time; a single allocation could provide memory for several -adjacent elements. The flexible array code does not know if a specific -element has been written; it only knows if the associated memory is -present. So a flex_array_get() call on an element which was never stored -in the array has the potential to return a pointer to random data. If the -caller does not have a separate way to know which elements were actually -stored, it might be wise, at least, to add GFP_ZERO to the flags argument -to ensure that all elements are zeroed. - -There is no way to remove a single element from the array. It is possible, -though, to remove all elements with a call to: +adjacent elements. Flexible array elements are normally initialized to the +value FLEX_ARRAY_FREE (defined as 0x6c in <linux/poison.h>), so errors +involving that number probably result from use of unstored array entries. +Note that, if array elements are allocated with __GFP_ZERO, they will be +initialized to zero and this poisoning will not happen. + +Individual elements in the array can be cleared with: + + int flex_array_clear(struct flex_array *array, unsigned int element_nr); + +This function will set the given element to FLEX_ARRAY_FREE and return +zero. If storage for the indicated element is not allocated for the array, +flex_array_clear() will return -EINVAL instead. Note that clearing an +element does not release the storage associated with it; to reduce the +allocated size of an array, call: + + int flex_array_shrink(struct flex_array *array); + +The return value will be the number of pages of memory actually freed. +This function works by scanning the array for pages containing nothing but +FLEX_ARRAY_FREE bytes, so (1) it can be expensive, and (2) it will not work +if the array's pages are allocated with __GFP_ZERO. + +It is possible to remove all elements of an array with a call to: void flex_array_free_parts(struct flex_array *array); diff --git a/Documentation/hwmon/ltc4215 b/Documentation/hwmon/ltc4215 index 2e6a21eb656..c196a184625 100644 --- a/Documentation/hwmon/ltc4215 +++ b/Documentation/hwmon/ltc4215 @@ -22,12 +22,13 @@ Usage Notes ----------- This driver does not probe for LTC4215 devices, due to the fact that some -of the possible addresses are unfriendly to probing. You will need to use -the "force" parameter to tell the driver where to find the device. +of the possible addresses are unfriendly to probing. You will have to +instantiate the devices explicitly. Example: the following will load the driver for an LTC4215 at address 0x44 on I2C bus #0: -$ modprobe ltc4215 force=0,0x44 +$ modprobe ltc4215 +$ echo ltc4215 0x44 > /sys/bus/i2c/devices/i2c-0/new_device Sysfs entries diff --git a/Documentation/hwmon/ltc4245 b/Documentation/hwmon/ltc4245 index bae7a3adc5d..02838a47d86 100644 --- a/Documentation/hwmon/ltc4245 +++ b/Documentation/hwmon/ltc4245 @@ -23,12 +23,13 @@ Usage Notes ----------- This driver does not probe for LTC4245 devices, due to the fact that some -of the possible addresses are unfriendly to probing. You will need to use -the "force" parameter to tell the driver where to find the device. +of the possible addresses are unfriendly to probing. You will have to +instantiate the devices explicitly. Example: the following will load the driver for an LTC4245 at address 0x23 on I2C bus #1: -$ modprobe ltc4245 force=1,0x23 +$ modprobe ltc4245 +$ echo ltc4245 0x23 > /sys/bus/i2c/devices/i2c-1/new_device Sysfs entries diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices index c740b7b4108..e89490270ab 100644 --- a/Documentation/i2c/instantiating-devices +++ b/Documentation/i2c/instantiating-devices @@ -188,7 +188,7 @@ segment, the address is sufficient to uniquely identify the device to be deleted. Example: -# echo eeprom 0x50 > /sys/class/i2c-adapter/i2c-3/new_device +# echo eeprom 0x50 > /sys/bus/i2c/devices/i2c-3/new_device While this interface should only be used when in-kernel device declaration can't be done, there is a variety of cases where it can be helpful: diff --git a/Documentation/infiniband/user_mad.txt b/Documentation/infiniband/user_mad.txt index 744687dd195..8a366959f5c 100644 --- a/Documentation/infiniband/user_mad.txt +++ b/Documentation/infiniband/user_mad.txt @@ -128,8 +128,8 @@ Setting IsSM Capability Bit To create the appropriate character device files automatically with udev, a rule like - KERNEL="umad*", NAME="infiniband/%k" - KERNEL="issm*", NAME="infiniband/%k" + KERNEL=="umad*", NAME="infiniband/%k" + KERNEL=="issm*", NAME="infiniband/%k" can be used. This will create device nodes named diff --git a/Documentation/infiniband/user_verbs.txt b/Documentation/infiniband/user_verbs.txt index f847501e50b..afe3f8da901 100644 --- a/Documentation/infiniband/user_verbs.txt +++ b/Documentation/infiniband/user_verbs.txt @@ -58,7 +58,7 @@ Memory pinning To create the appropriate character device files automatically with udev, a rule like - KERNEL="uverbs*", NAME="infiniband/%k" + KERNEL=="uverbs*", NAME="infiniband/%k" can be used. This will create device nodes named diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI index 686e107923e..5fe8de5cc72 100644 --- a/Documentation/isdn/INTERFACE.CAPI +++ b/Documentation/isdn/INTERFACE.CAPI @@ -60,10 +60,9 @@ open() operation on regular files or character devices. After a successful return from register_appl(), CAPI messages from the application may be passed to the driver for the device via calls to the -send_message() callback function. The CAPI message to send is stored in the -data portion of an skb. Conversely, the driver may call Kernel CAPI's -capi_ctr_handle_message() function to pass a received CAPI message to Kernel -CAPI for forwarding to an application, specifying its ApplID. +send_message() callback function. Conversely, the driver may call Kernel +CAPI's capi_ctr_handle_message() function to pass a received CAPI message to +Kernel CAPI for forwarding to an application, specifying its ApplID. Deregistration requests (CAPI operation CAPI_RELEASE) from applications are forwarded as calls to the release_appl() callback function, passing the same @@ -142,6 +141,7 @@ u16 (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb) to accepting or queueing the message. Errors occurring during the actual processing of the message should be signaled with an appropriate reply message. + May be called in process or interrupt context. Calls to this function are not serialized by Kernel CAPI, ie. it must be prepared to be re-entered. @@ -154,7 +154,8 @@ read_proc_t *ctr_read_proc system entry, /proc/capi/controllers/<n>; will be called with a pointer to the device's capi_ctr structure as the last (data) argument -Note: Callback functions are never called in interrupt context. +Note: Callback functions except send_message() are never called in interrupt +context. - to be filled in before calling capi_ctr_ready(): @@ -171,14 +172,40 @@ u8 serial[CAPI_SERIAL_LEN] value to return for CAPI_GET_SERIAL -4.3 The _cmsg Structure +4.3 SKBs + +CAPI messages are passed between Kernel CAPI and the driver via send_message() +and capi_ctr_handle_message(), stored in the data portion of a socket buffer +(skb). Each skb contains a single CAPI message coded according to the CAPI 2.0 +standard. + +For the data transfer messages, DATA_B3_REQ and DATA_B3_IND, the actual +payload data immediately follows the CAPI message itself within the same skb. +The Data and Data64 parameters are not used for processing. The Data64 +parameter may be omitted by setting the length field of the CAPI message to 22 +instead of 30. + + +4.4 The _cmsg Structure (declared in <linux/isdn/capiutil.h>) The _cmsg structure stores the contents of a CAPI 2.0 message in an easily -accessible form. It contains members for all possible CAPI 2.0 parameters, of -which only those appearing in the message type currently being processed are -actually used. Unused members should be set to zero. +accessible form. It contains members for all possible CAPI 2.0 parameters, +including subparameters of the Additional Info and B Protocol structured +parameters, with the following exceptions: + +* second Calling party number (CONNECT_IND) + +* Data64 (DATA_B3_REQ and DATA_B3_IND) + +* Sending complete (subparameter of Additional Info, CONNECT_REQ and INFO_REQ) + +* Global Configuration (subparameter of B Protocol, CONNECT_REQ, CONNECT_RESP + and SELECT_B_PROTOCOL_REQ) + +Only those parameters appearing in the message type currently being processed +are actually used. Unused members should be set to zero. Members are named after the CAPI 2.0 standard names of the parameters they represent. See <linux/isdn/capiutil.h> for the exact spelling. Member data @@ -190,18 +217,19 @@ u16 for CAPI parameters of type 'word' u32 for CAPI parameters of type 'dword' -_cstruct for CAPI parameters of type 'struct' not containing any - variably-sized (struct) subparameters (eg. 'Called Party Number') +_cstruct for CAPI parameters of type 'struct' The member is a pointer to a buffer containing the parameter in CAPI encoding (length + content). It may also be NULL, which will be taken to represent an empty (zero length) parameter. + Subparameters are stored in encoded form within the content part. -_cmstruct for CAPI parameters of type 'struct' containing 'struct' - subparameters ('Additional Info' and 'B Protocol') +_cmstruct alternative representation for CAPI parameters of type 'struct' + (used only for the 'Additional Info' and 'B Protocol' parameters) The representation is a single byte containing one of the values: - CAPI_DEFAULT: the parameter is empty - CAPI_COMPOSE: the values of the subparameters are stored - individually in the corresponding _cmsg structure members + CAPI_DEFAULT: The parameter is empty/absent. + CAPI_COMPOSE: The parameter is present. + Subparameter values are stored individually in the corresponding + _cmsg structure members. Functions capi_cmsg2message() and capi_message2cmsg() are provided to convert messages between their transport encoding described in the CAPI 2.0 standard @@ -297,3 +325,26 @@ char *capi_cmd2str(u8 Command, u8 Subcommand) be NULL if the command/subcommand is not one of those defined in the CAPI 2.0 standard. + +7. Debugging + +The module kernelcapi has a module parameter showcapimsgs controlling some +debugging output produced by the module. It can only be set when the module is +loaded, via a parameter "showcapimsgs=<n>" to the modprobe command, either on +the command line or in the configuration file. + +If the lowest bit of showcapimsgs is set, kernelcapi logs controller and +application up and down events. + +In addition, every registered CAPI controller has an associated traceflag +parameter controlling how CAPI messages sent from and to tha controller are +logged. The traceflag parameter is initialized with the value of the +showcapimsgs parameter when the controller is registered, but can later be +changed via the MANUFACTURER_REQ command KCAPI_CMD_TRACE. + +If the value of traceflag is non-zero, CAPI messages are logged. +DATA_B3 messages are only logged if the value of traceflag is > 2. + +If the lowest bit of traceflag is set, only the command/subcommand and message +length are logged. Otherwise, kernelcapi logs a readable representation of +the entire message. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 1dc4b9cc20e..c8d1b2be28e 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -671,6 +671,7 @@ and is between 256 and 4096 characters. It is defined in the file earlyprintk= [X86,SH,BLACKFIN] earlyprintk=vga earlyprintk=serial[,ttySn[,baudrate]] + earlyprintk=ttySn[,baudrate] earlyprintk=dbgp[debugController#] Append ",keep" to not disable it when the real console diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index ba9373f82ab..098de5bce00 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -42,7 +42,6 @@ #include <signal.h> #include "linux/lguest_launcher.h" #include "linux/virtio_config.h" -#include <linux/virtio_ids.h> #include "linux/virtio_net.h" #include "linux/virtio_blk.h" #include "linux/virtio_console.h" diff --git a/Documentation/i2c/chips/eeprom b/Documentation/misc-devices/eeprom index f7e8104b576..f7e8104b576 100644 --- a/Documentation/i2c/chips/eeprom +++ b/Documentation/misc-devices/eeprom diff --git a/Documentation/i2c/chips/max6875 b/Documentation/misc-devices/max6875 index 10ca43cd1a7..1e89ee3ccc1 100644 --- a/Documentation/i2c/chips/max6875 +++ b/Documentation/misc-devices/max6875 @@ -42,10 +42,12 @@ General Remarks Valid addresses for the MAX6875 are 0x50 and 0x52. Valid addresses for the MAX6874 are 0x50, 0x52, 0x54 and 0x56. -The driver does not probe any address, so you must force the address. +The driver does not probe any address, so you explicitly instantiate the +devices. Example: -$ modprobe max6875 force=0,0x50 +$ modprobe max6875 +$ echo max6875 0x50 > /sys/bus/i2c/devices/i2c-0/new_device The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple addresses. For example, for address 0x50, it also reserves 0x51. diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt index c6cf4a3c16e..61bb645d50e 100644 --- a/Documentation/networking/pktgen.txt +++ b/Documentation/networking/pktgen.txt @@ -90,6 +90,11 @@ Examples: pgset "dstmac 00:00:00:00:00:00" sets MAC destination address pgset "srcmac 00:00:00:00:00:00" sets MAC source address + pgset "queue_map_min 0" Sets the min value of tx queue interval + pgset "queue_map_max 7" Sets the max value of tx queue interval, for multiqueue devices + To select queue 1 of a given device, + use queue_map_min=1 and queue_map_max=1 + pgset "src_mac_count 1" Sets the number of MACs we'll range through. The 'minimum' MAC is what you set with srcmac. @@ -101,6 +106,9 @@ Examples: IPDST_RND, UDPSRC_RND, UDPDST_RND, MACSRC_RND, MACDST_RND MPLS_RND, VID_RND, SVID_RND + QUEUE_MAP_RND # queue map random + QUEUE_MAP_CPU # queue map mirrors smp_processor_id() + pgset "udp_src_min 9" set UDP source port min, If < udp_src_max, then cycle through the port range. diff --git a/Documentation/scsi/hptiop.txt b/Documentation/scsi/hptiop.txt index a6eb4add1be..9605179711f 100644 --- a/Documentation/scsi/hptiop.txt +++ b/Documentation/scsi/hptiop.txt @@ -3,6 +3,25 @@ HIGHPOINT ROCKETRAID 3xxx/4xxx ADAPTER DRIVER (hptiop) Controller Register Map ------------------------- +For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2: + + BAR0 offset Register + 0x11C5C Link Interface IRQ Set + 0x11C60 Link Interface IRQ Clear + + BAR2 offset Register + 0x10 Inbound Message Register 0 + 0x14 Inbound Message Register 1 + 0x18 Outbound Message Register 0 + 0x1C Outbound Message Register 1 + 0x20 Inbound Doorbell Register + 0x24 Inbound Interrupt Status Register + 0x28 Inbound Interrupt Mask Register + 0x30 Outbound Interrupt Status Register + 0x34 Outbound Interrupt Mask Register + 0x40 Inbound Queue Port + 0x44 Outbound Queue Port + For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0: BAR0 offset Register @@ -93,7 +112,7 @@ The driver exposes following sysfs attributes: ----------------------------------------------------------------------------- -Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved. +Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved. This file is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 75fddb40f41..4c7f9aee5c4 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -359,6 +359,7 @@ STAC9227/9228/9229/927x 5stack-no-fp D965 5stack without front panel dell-3stack Dell Dimension E520 dell-bios Fixes with Dell BIOS setup + volknob Fixes with volume-knob widget 0x24 auto BIOS setup (default) STAC92HD71B* diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt index 957b22fde2d..8179692fbb9 100644 --- a/Documentation/trace/ftrace.txt +++ b/Documentation/trace/ftrace.txt @@ -1231,6 +1231,7 @@ something like this simple program: #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> +#include <string.h> #define _STR(x) #x #define STR(x) _STR(x) @@ -1265,6 +1266,7 @@ const char *find_debugfs(void) return NULL; } + strcat(debugfs, "/tracing/"); debugfs_found = 1; return debugfs; diff --git a/Documentation/vm/ksm.txt b/Documentation/vm/ksm.txt index 72a22f65960..262d8e6793a 100644 --- a/Documentation/vm/ksm.txt +++ b/Documentation/vm/ksm.txt @@ -52,15 +52,15 @@ The KSM daemon is controlled by sysfs files in /sys/kernel/mm/ksm/, readable by all but writable only by root: max_kernel_pages - set to maximum number of kernel pages that KSM may use - e.g. "echo 2000 > /sys/kernel/mm/ksm/max_kernel_pages" + e.g. "echo 100000 > /sys/kernel/mm/ksm/max_kernel_pages" Value 0 imposes no limit on the kernel pages KSM may use; but note that any process using MADV_MERGEABLE can cause KSM to allocate these pages, unswappable until it exits. - Default: 2000 (chosen for demonstration purposes) + Default: quarter of memory (chosen to not pin too much) pages_to_scan - how many present pages to scan before ksmd goes to sleep - e.g. "echo 200 > /sys/kernel/mm/ksm/pages_to_scan" - Default: 200 (chosen for demonstration purposes) + e.g. "echo 100 > /sys/kernel/mm/ksm/pages_to_scan" + Default: 100 (chosen for demonstration purposes) sleep_millisecs - how many milliseconds ksmd should sleep before next scan e.g. "echo 20 > /sys/kernel/mm/ksm/sleep_millisecs" @@ -70,7 +70,8 @@ run - set 0 to stop ksmd from running but keep merged pages, set 1 to run ksmd e.g. "echo 1 > /sys/kernel/mm/ksm/run", set 2 to stop ksmd and unmerge all pages currently merged, but leave mergeable areas registered for next run - Default: 1 (for immediate use by apps which register) + Default: 0 (must be changed to 1 to activate KSM, + except if CONFIG_SYSFS is disabled) The effectiveness of KSM and MADV_MERGEABLE is shown in /sys/kernel/mm/ksm/: @@ -86,4 +87,4 @@ pages_volatile embraces several different kinds of activity, but a high proportion there would also indicate poor use of madvise MADV_MERGEABLE. Izik Eidus, -Hugh Dickins, 30 July 2009 +Hugh Dickins, 24 Sept 2009 diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c index fa1a30d9e9d..3ec4f2a2258 100644 --- a/Documentation/vm/page-types.c +++ b/Documentation/vm/page-types.c @@ -2,7 +2,10 @@ * page-types: Tool for querying page flags * * Copyright (C) 2009 Intel corporation - * Copyright (C) 2009 Wu Fengguang <fengguang.wu@intel.com> + * + * Authors: Wu Fengguang <fengguang.wu@intel.com> + * + * Released under the General Public License (GPL). */ #define _LARGEFILE64_SOURCE @@ -69,7 +72,9 @@ #define KPF_COMPOUND_TAIL 16 #define KPF_HUGE 17 #define KPF_UNEVICTABLE 18 +#define KPF_HWPOISON 19 #define KPF_NOPAGE 20 +#define KPF_KSM 21 /* [32-] kernel hacking assistances */ #define KPF_RESERVED 32 @@ -116,7 +121,9 @@ static char *page_flag_names[] = { [KPF_COMPOUND_TAIL] = "T:compound_tail", [KPF_HUGE] = "G:huge", [KPF_UNEVICTABLE] = "u:unevictable", + [KPF_HWPOISON] = "X:hwpoison", [KPF_NOPAGE] = "n:nopage", + [KPF_KSM] = "x:ksm", [KPF_RESERVED] = "r:reserved", [KPF_MLOCKED] = "m:mlocked", @@ -152,9 +159,6 @@ static unsigned long opt_size[MAX_ADDR_RANGES]; static int nr_vmas; static unsigned long pg_start[MAX_VMAS]; static unsigned long pg_end[MAX_VMAS]; -static unsigned long voffset; - -static int pagemap_fd; #define MAX_BIT_FILTERS 64 static int nr_bit_filters; @@ -163,9 +167,16 @@ static uint64_t opt_bits[MAX_BIT_FILTERS]; static int page_size; -#define PAGES_BATCH (64 << 10) /* 64k pages */ +static int pagemap_fd; static int kpageflags_fd; +static int opt_hwpoison; +static int opt_unpoison; + +static char *hwpoison_debug_fs = "/debug/hwpoison"; +static int hwpoison_inject_fd; +static int hwpoison_forget_fd; + #define HASH_SHIFT 13 #define HASH_SIZE (1 << HASH_SHIFT) #define HASH_MASK (HASH_SIZE - 1) @@ -207,6 +218,74 @@ static void fatal(const char *x, ...) exit(EXIT_FAILURE); } +int checked_open(const char *pathname, int flags) +{ + int fd = open(pathname, flags); + + if (fd < 0) { + perror(pathname); + exit(EXIT_FAILURE); + } + + return fd; +} + +/* + * pagemap/kpageflags routines + */ + +static unsigned long do_u64_read(int fd, char *name, + uint64_t *buf, + unsigned long index, + unsigned long count) +{ + long bytes; + + if (index > ULONG_MAX / 8) + fatal("index overflow: %lu\n", index); + + if (lseek(fd, index * 8, SEEK_SET) < 0) { + perror(name); + exit(EXIT_FAILURE); + } + + bytes = read(fd, buf, count * 8); + if (bytes < 0) { + perror(name); + exit(EXIT_FAILURE); + } + if (bytes % 8) + fatal("partial read: %lu bytes\n", bytes); + + return bytes / 8; +} + +static unsigned long kpageflags_read(uint64_t *buf, + unsigned long index, + unsigned long pages) +{ + return do_u64_read(kpageflags_fd, PROC_KPAGEFLAGS, buf, index, pages); +} + +static unsigned long pagemap_read(uint64_t *buf, + unsigned long index, + unsigned long pages) +{ + return do_u64_read(pagemap_fd, "/proc/pid/pagemap", buf, index, pages); +} + +static unsigned long pagemap_pfn(uint64_t val) +{ + unsigned long pfn; + + if (val & PM_PRESENT) + pfn = PM_PFRAME(val); + else + pfn = 0; + + return pfn; +} + /* * page flag names @@ -255,7 +334,8 @@ static char *page_flag_longname(uint64_t flags) * page list and summary */ -static void show_page_range(unsigned long offset, uint64_t flags) +static void show_page_range(unsigned long voffset, + unsigned long offset, uint64_t flags) { static uint64_t flags0; static unsigned long voff; @@ -281,7 +361,8 @@ static void show_page_range(unsigned long offset, uint64_t flags) count = 1; } -static void show_page(unsigned long offset, uint64_t flags) +static void show_page(unsigned long voffset, + unsigned long offset, uint64_t flags) { if (opt_pid) printf("%lx\t", voffset); @@ -362,6 +443,62 @@ static uint64_t well_known_flags(uint64_t flags) return flags; } +static uint64_t kpageflags_flags(uint64_t flags) +{ + flags = expand_overloaded_flags(flags); + + if (!opt_raw) + flags = well_known_flags(flags); + + return flags; +} + +/* + * page actions + */ + +static void prepare_hwpoison_fd(void) +{ + char buf[100]; + + if (opt_hwpoison && !hwpoison_inject_fd) { + sprintf(buf, "%s/corrupt-pfn", hwpoison_debug_fs); + hwpoison_inject_fd = checked_open(buf, O_WRONLY); + } + + if (opt_unpoison && !hwpoison_forget_fd) { + sprintf(buf, "%s/renew-pfn", hwpoison_debug_fs); + hwpoison_forget_fd = checked_open(buf, O_WRONLY); + } +} + +static int hwpoison_page(unsigned long offset) +{ + char buf[100]; + int len; + + len = sprintf(buf, "0x%lx\n", offset); + len = write(hwpoison_inject_fd, buf, len); + if (len < 0) { + perror("hwpoison inject"); + return len; + } + return 0; +} + +static int unpoison_page(unsigned long offset) +{ + char buf[100]; + int len; + + len = sprintf(buf, "0x%lx\n", offset); + len = write(hwpoison_forget_fd, buf, len); + if (len < 0) { + perror("hwpoison forget"); + return len; + } + return 0; +} /* * page frame walker @@ -394,104 +531,83 @@ static int hash_slot(uint64_t flags) exit(EXIT_FAILURE); } -static void add_page(unsigned long offset, uint64_t flags) +static void add_page(unsigned long voffset, + unsigned long offset, uint64_t flags) { - flags = expand_overloaded_flags(flags); - - if (!opt_raw) - flags = well_known_flags(flags); + flags = kpageflags_flags(flags); if (!bit_mask_ok(flags)) return; + if (opt_hwpoison) + hwpoison_page(offset); + if (opt_unpoison) + unpoison_page(offset); + if (opt_list == 1) - show_page_range(offset, flags); + show_page_range(voffset, offset, flags); else if (opt_list == 2) - show_page(offset, flags); + show_page(voffset, offset, flags); nr_pages[hash_slot(flags)]++; total_pages++; } -static void walk_pfn(unsigned long index, unsigned long count) +#define KPAGEFLAGS_BATCH (64 << 10) /* 64k pages */ +static void walk_pfn(unsigned long voffset, + unsigned long index, + unsigned long count) { + uint64_t buf[KPAGEFLAGS_BATCH]; unsigned long batch; - unsigned long n; + unsigned long pages; unsigned long i; - if (index > ULONG_MAX / KPF_BYTES) - fatal("index overflow: %lu\n", index); - - lseek(kpageflags_fd, index * KPF_BYTES, SEEK_SET); - while (count) { - uint64_t kpageflags_buf[KPF_BYTES * PAGES_BATCH]; - - batch = min_t(unsigned long, count, PAGES_BATCH); - n = read(kpageflags_fd, kpageflags_buf, batch * KPF_BYTES); - if (n == 0) + batch = min_t(unsigned long, count, KPAGEFLAGS_BATCH); + pages = kpageflags_read(buf, index, batch); + if (pages == 0) break; - if (n < 0) { - perror(PROC_KPAGEFLAGS); - exit(EXIT_FAILURE); - } - if (n % KPF_BYTES != 0) - fatal("partial read: %lu bytes\n", n); - n = n / KPF_BYTES; + for (i = 0; i < pages; i++) + add_page(voffset + i, index + i, buf[i]); - for (i = 0; i < n; i++) - add_page(index + i, kpageflags_buf[i]); - - index += batch; - count -= batch; + index += pages; + count -= pages; } } - -#define PAGEMAP_BATCH 4096 -static unsigned long task_pfn(unsigned long pgoff) +#define PAGEMAP_BATCH (64 << 10) +static void walk_vma(unsigned long index, unsigned long count) { - static uint64_t buf[PAGEMAP_BATCH]; - static unsigned long start; - static long count; - uint64_t pfn; + uint64_t buf[PAGEMAP_BATCH]; + unsigned long batch; + unsigned long pages; + unsigned long pfn; + unsigned long i; - if (pgoff < start || pgoff >= start + count) { - if (lseek64(pagemap_fd, - (uint64_t)pgoff * PM_ENTRY_BYTES, - SEEK_SET) < 0) { - perror("pagemap seek"); - exit(EXIT_FAILURE); - } - count = read(pagemap_fd, buf, sizeof(buf)); - if (count == 0) - return 0; - if (count < 0) { - perror("pagemap read"); - exit(EXIT_FAILURE); - } - if (count % PM_ENTRY_BYTES) { - fatal("pagemap read not aligned.\n"); - exit(EXIT_FAILURE); - } - count /= PM_ENTRY_BYTES; - start = pgoff; - } + while (count) { + batch = min_t(unsigned long, count, PAGEMAP_BATCH); + pages = pagemap_read(buf, index, batch); + if (pages == 0) + break; - pfn = buf[pgoff - start]; - if (pfn & PM_PRESENT) - pfn = PM_PFRAME(pfn); - else - pfn = 0; + for (i = 0; i < pages; i++) { + pfn = pagemap_pfn(buf[i]); + if (pfn) + walk_pfn(index + i, pfn, 1); + } - return pfn; + index += pages; + count -= pages; + } } static void walk_task(unsigned long index, unsigned long count) { - int i = 0; const unsigned long end = index + count; + unsigned long start; + int i = 0; while (index < end) { @@ -501,15 +617,11 @@ static void walk_task(unsigned long index, unsigned long count) if (pg_start[i] >= end) return; - voffset = max_t(unsigned long, pg_start[i], index); - index = min_t(unsigned long, pg_end[i], end); + start = max_t(unsigned long, pg_start[i], index); + index = min_t(unsigned long, pg_end[i], end); - assert(voffset < index); - for (; voffset < index; voffset++) { - unsigned long pfn = task_pfn(voffset); - if (pfn) - walk_pfn(pfn, 1); - } + assert(start < index); + walk_vma(start, index - start); } } @@ -527,18 +639,14 @@ static void walk_addr_ranges(void) { int i; - kpageflags_fd = open(PROC_KPAGEFLAGS, O_RDONLY); - if (kpageflags_fd < 0) { - perror(PROC_KPAGEFLAGS); - exit(EXIT_FAILURE); - } + kpageflags_fd = checked_open(PROC_KPAGEFLAGS, O_RDONLY); if (!nr_addr_ranges) add_addr_range(0, ULONG_MAX); for (i = 0; i < nr_addr_ranges; i++) if (!opt_pid) - walk_pfn(opt_offset[i], opt_size[i]); + walk_pfn(0, opt_offset[i], opt_size[i]); else walk_task(opt_offset[i], opt_size[i]); @@ -575,6 +683,8 @@ static void usage(void) " -l|--list Show page details in ranges\n" " -L|--list-each Show page details one by one\n" " -N|--no-summary Don't show summay info\n" +" -X|--hwpoison hwpoison pages\n" +" -x|--unpoison unpoison pages\n" " -h|--help Show this usage message\n" "addr-spec:\n" " N one page at offset N (unit: pages)\n" @@ -624,11 +734,7 @@ static void parse_pid(const char *str) opt_pid = parse_number(str); sprintf(buf, "/proc/%d/pagemap", opt_pid); - pagemap_fd = open(buf, O_RDONLY); - if (pagemap_fd < 0) { - perror(buf); - exit(EXIT_FAILURE); - } + pagemap_fd = checked_open(buf, O_RDONLY); sprintf(buf, "/proc/%d/maps", opt_pid); file = fopen(buf, "r"); @@ -788,6 +894,8 @@ static struct option opts[] = { { "list" , 0, NULL, 'l' }, { "list-each" , 0, NULL, 'L' }, { "no-summary", 0, NULL, 'N' }, + { "hwpoison" , 0, NULL, 'X' }, + { "unpoison" , 0, NULL, 'x' }, { "help" , 0, NULL, 'h' }, { NULL , 0, NULL, 0 } }; @@ -799,7 +907,7 @@ int main(int argc, char *argv[]) page_size = getpagesize(); while ((c = getopt_long(argc, argv, - "rp:f:a:b:lLNh", opts, NULL)) != -1) { + "rp:f:a:b:lLNXxh", opts, NULL)) != -1) { switch (c) { case 'r': opt_raw = 1; @@ -825,6 +933,14 @@ int main(int argc, char *argv[]) case 'N': opt_no_summary = 1; break; + case 'X': + opt_hwpoison = 1; + prepare_hwpoison_fd(); + break; + case 'x': + opt_unpoison = 1; + prepare_hwpoison_fd(); + break; case 'h': usage(); exit(0); @@ -844,7 +960,7 @@ int main(int argc, char *argv[]) walk_addr_ranges(); if (opt_list == 1) - show_page_range(0, 0); /* drain the buffer */ + show_page_range(0, 0, 0); /* drain the buffer */ if (opt_no_summary) return 0; diff --git a/Documentation/vm/pagemap.txt b/Documentation/vm/pagemap.txt index 600a304a828..df09b9650a8 100644 --- a/Documentation/vm/pagemap.txt +++ b/Documentation/vm/pagemap.txt @@ -57,7 +57,9 @@ There are three components to pagemap: 16. COMPOUND_TAIL 16. HUGE 18. UNEVICTABLE + 19. HWPOISON 20. NOPAGE + 21. KSM Short descriptions to the page flags: @@ -86,9 +88,15 @@ Short descriptions to the page flags: 17. HUGE this is an integral part of a HugeTLB page +19. HWPOISON + hardware detected memory corruption on this page: don't touch the data! + 20. NOPAGE no page frame exists at the requested address +21. KSM + identical memory pages dynamically shared between one or more processes + [IO related page flags] 1. ERROR IO error occurred 3. UPTODATE page has up-to-date data diff --git a/Documentation/w1/masters/ds2482 b/Documentation/w1/masters/ds2482 index 9210d6fa502..299b91c7609 100644 --- a/Documentation/w1/masters/ds2482 +++ b/Documentation/w1/masters/ds2482 @@ -24,8 +24,8 @@ General Remarks Valid addresses are 0x18, 0x19, 0x1a, and 0x1b. However, the device cannot be detected without writing to the i2c bus, so no -detection is done. -You should force the device address. +detection is done. You should instantiate the device explicitly. -$ modprobe ds2482 force=0,0x18 +$ modprobe ds2482 +$ echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-0/new_device |