diff options
Diffstat (limited to 'arch/alpha/oprofile/op_model_ev5.c')
| -rw-r--r-- | arch/alpha/oprofile/op_model_ev5.c | 211 |
1 files changed, 211 insertions, 0 deletions
diff --git a/arch/alpha/oprofile/op_model_ev5.c b/arch/alpha/oprofile/op_model_ev5.c new file mode 100644 index 00000000000..ceea6e1ad79 --- /dev/null +++ b/arch/alpha/oprofile/op_model_ev5.c @@ -0,0 +1,211 @@ +/** + * @file arch/alpha/oprofile/op_model_ev5.c + * + * @remark Copyright 2002 OProfile authors + * @remark Read the file COPYING + * + * @author Richard Henderson <rth@twiddle.net> + */ + +#include <linux/oprofile.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <asm/ptrace.h> +#include <asm/system.h> + +#include "op_impl.h" + + +/* Compute all of the registers in preparation for enabling profiling. + + The 21164 (EV5) and 21164PC (PCA65) vary in the bit placement and + meaning of the "CBOX" events. Given that we don't care about meaning + at this point, arrange for the difference in bit placement to be + handled by common code. */ + +static void +common_reg_setup(struct op_register_config *reg, + struct op_counter_config *ctr, + struct op_system_config *sys, + int cbox1_ofs, int cbox2_ofs) +{ + int i, ctl, reset, need_reset; + + /* Select desired events. The event numbers are selected such + that they map directly into the event selection fields: + + PCSEL0: 0, 1 + PCSEL1: 24-39 + CBOX1: 40-47 + PCSEL2: 48-63 + CBOX2: 64-71 + + There are two special cases, in that CYCLES can be measured + on PCSEL[02], and SCACHE_WRITE can be measured on CBOX[12]. + These event numbers are canonicalizes to their first appearance. */ + + ctl = 0; + for (i = 0; i < 3; ++i) { + unsigned long event = ctr[i].event; + if (!ctr[i].enabled) + continue; + + /* Remap the duplicate events, as described above. */ + if (i == 2) { + if (event == 0) + event = 12+48; + else if (event == 2+41) + event = 4+65; + } + + /* Convert the event numbers onto mux_select bit mask. */ + if (event < 2) + ctl |= event << 31; + else if (event < 24) + /* error */; + else if (event < 40) + ctl |= (event - 24) << 4; + else if (event < 48) + ctl |= (event - 40) << cbox1_ofs | 15 << 4; + else if (event < 64) + ctl |= event - 48; + else if (event < 72) + ctl |= (event - 64) << cbox2_ofs | 15; + } + reg->mux_select = ctl; + + /* Select processor mode. */ + /* ??? Need to come up with some mechanism to trace only selected + processes. For now select from pal, kernel and user mode. */ + ctl = 0; + ctl |= !sys->enable_pal << 9; + ctl |= !sys->enable_kernel << 8; + ctl |= !sys->enable_user << 30; + reg->proc_mode = ctl; + + /* Select interrupt frequencies. Take the interrupt count selected + by the user, and map it onto one of the possible counter widths. + If the user value is in between, compute a value to which the + counter is reset at each interrupt. */ + + ctl = reset = need_reset = 0; + for (i = 0; i < 3; ++i) { + unsigned long max, hilo, count = ctr[i].count; + if (!ctr[i].enabled) + continue; + + if (count <= 256) + count = 256, hilo = 3, max = 256; + else { + max = (i == 2 ? 16384 : 65536); + hilo = 2; + if (count > max) + count = max; + } + ctr[i].count = count; + + ctl |= hilo << (8 - i*2); + reset |= (max - count) << (48 - 16*i); + if (count != max) + need_reset |= 1 << i; + } + reg->freq = ctl; + reg->reset_values = reset; + reg->need_reset = need_reset; +} + +static void +ev5_reg_setup(struct op_register_config *reg, + struct op_counter_config *ctr, + struct op_system_config *sys) +{ + common_reg_setup(reg, ctr, sys, 19, 22); +} + +static void +pca56_reg_setup(struct op_register_config *reg, + struct op_counter_config *ctr, + struct op_system_config *sys) +{ + common_reg_setup(reg, ctr, sys, 8, 11); +} + +/* Program all of the registers in preparation for enabling profiling. */ + +static void +ev5_cpu_setup (void *x) +{ + struct op_register_config *reg = x; + + wrperfmon(2, reg->mux_select); + wrperfmon(3, reg->proc_mode); + wrperfmon(4, reg->freq); + wrperfmon(6, reg->reset_values); +} + +/* CTR is a counter for which the user has requested an interrupt count + in between one of the widths selectable in hardware. Reset the count + for CTR to the value stored in REG->RESET_VALUES. + + For EV5, this means disabling profiling, reading the current values, + masking in the value for the desired register, writing, then turning + profiling back on. + + This can be streamlined if profiling is only enabled for user mode. + In that case we know that the counters are not currently incrementing + (due to being in kernel mode). */ + +static void +ev5_reset_ctr(struct op_register_config *reg, unsigned long ctr) +{ + unsigned long values, mask, not_pk, reset_values; + + mask = (ctr == 0 ? 0xfffful << 48 + : ctr == 1 ? 0xfffful << 32 + : 0x3fff << 16); + + not_pk = 1 << 9 | 1 << 8; + + reset_values = reg->reset_values; + + if ((reg->proc_mode & not_pk) == not_pk) { + values = wrperfmon(5, 0); + values = (reset_values & mask) | (values & ~mask & -2); + wrperfmon(6, values); + } else { + wrperfmon(0, -1); + values = wrperfmon(5, 0); + values = (reset_values & mask) | (values & ~mask & -2); + wrperfmon(6, values); + wrperfmon(1, reg->enable); + } +} + +static void +ev5_handle_interrupt(unsigned long which, struct pt_regs *regs, + struct op_counter_config *ctr) +{ + /* Record the sample. */ + oprofile_add_sample(regs, which); +} + + +struct op_axp_model op_model_ev5 = { + .reg_setup = ev5_reg_setup, + .cpu_setup = ev5_cpu_setup, + .reset_ctr = ev5_reset_ctr, + .handle_interrupt = ev5_handle_interrupt, + .cpu_type = "alpha/ev5", + .num_counters = 3, + .can_set_proc_mode = 1, +}; + +struct op_axp_model op_model_pca56 = { + .reg_setup = pca56_reg_setup, + .cpu_setup = ev5_cpu_setup, + .reset_ctr = ev5_reset_ctr, + .handle_interrupt = ev5_handle_interrupt, + .cpu_type = "alpha/pca56", + .num_counters = 3, + .can_set_proc_mode = 1, +}; |