diff options
Diffstat (limited to 'arch/arm/Kconfig.debug')
| -rw-r--r-- | arch/arm/Kconfig.debug | 89 |
1 files changed, 70 insertions, 19 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 575db67a61d..453ae2feaee 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -278,6 +278,14 @@ choice Say Y here if you want the debug print routines to direct their output to the UART on Highbank based devices. + config DEBUG_HIP01_UART + bool "Hisilicon Hip01 Debug UART" + depends on ARCH_HIP01 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on HIP01 UART. + config DEBUG_HIP04_UART bool "Hisilicon HiP04 Debug UART" depends on ARCH_HIP04 @@ -433,7 +441,7 @@ choice Say Y here if you want the debug print routines to direct their output to the serial port on MSM devices. - ARCH DEBUG_UART_PHYS DEBUG_UART_BASE # + ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT # MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1 MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2 MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3 @@ -452,7 +460,8 @@ choice Say Y here if you want the debug print routines to direct their output to the serial port on Qualcomm devices. - ARCH DEBUG_UART_PHYS DEBUG_UART_BASE + ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT + APQ8064 0x16640000 0xf0040000 APQ8084 0xf995e000 0xfa75e000 MSM8X60 0x19c40000 0xf0040000 MSM8960 0x16440000 0xf0040000 @@ -461,13 +470,13 @@ choice Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration options based on your needs. - config DEBUG_MVEBU_UART - bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)" + config DEBUG_MVEBU_UART0 + bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)" depends on ARCH_MVEBU select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support - on MVEBU based platforms. + on MVEBU based platforms on UART0. This option should be used with the old bootloaders that left the internal registers mapped at @@ -480,13 +489,28 @@ choice when u-boot hands over to the kernel, the system silently crashes, with no serial output at all. - config DEBUG_MVEBU_UART_ALTERNATE - bool "Kernel low-level debugging messages via MVEBU UART (new bootloaders)" + config DEBUG_MVEBU_UART0_ALTERNATE + bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)" depends on ARCH_MVEBU select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support - on MVEBU based platforms. + on MVEBU based platforms on UART0. + + This option should be used with the new bootloaders + that remap the internal registers at 0xf1000000. + + If the wrong DEBUG_MVEBU_UART* option is selected, + when u-boot hands over to the kernel, the system + silently crashes, with no serial output at all. + + config DEBUG_MVEBU_UART1_ALTERNATE + bool "Kernel low-level debugging messages via MVEBU UART1 (new bootloaders)" + depends on ARCH_MVEBU + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on MVEBU based platforms on UART1. This option should be used with the new bootloaders that remap the internal registers at 0xf1000000. @@ -922,16 +946,28 @@ choice config DEBUG_SIRFPRIMA2_UART1 bool "Kernel low-level debugging messages via SiRFprimaII UART1" depends on ARCH_PRIMA2 + select DEBUG_SIRFSOC_UART help Say Y here if you want the debug print routines to direct their output to the uart1 port on SiRFprimaII devices. - config DEBUG_SIRFMARCO_UART1 - bool "Kernel low-level debugging messages via SiRFmarco UART1" - depends on ARCH_MARCO + config DEBUG_SIRFATLAS7_UART0 + bool "Kernel low-level debugging messages via SiRFatlas7 UART0" + depends on ARCH_ATLAS7 + select DEBUG_SIRFSOC_UART help Say Y here if you want the debug print routines to direct - their output to the uart1 port on SiRFmarco devices. + their output to the uart0 port on SiRFATLAS7 devices.The uart0 + is used on SiRFATLAS7 as a extra debug port.sometimes an extra + debug port can be very useful. + + config DEBUG_SIRFATLAS7_UART1 + bool "Kernel low-level debugging messages via SiRFatlas7 UART1" + depends on ARCH_ATLAS7 + select DEBUG_SIRFSOC_UART + help + Say Y here if you want the debug print routines to direct + their output to the uart1 port on SiRFATLAS7 devices. config STIH41X_DEBUG_ASC2 bool "Use StiH415/416 ASC2 UART for low-level debug" @@ -979,7 +1015,7 @@ choice for Mediatek mt6589 based platforms on UART0. config DEBUG_MT8127_UART0 - bool "Mediatek mt8127 UART0" + bool "Mediatek mt8127/mt6592 UART0" depends on ARCH_MEDIATEK select DEBUG_UART_8250 help @@ -1171,6 +1207,10 @@ config DEBUG_STI_UART bool depends on ARCH_STI +config DEBUG_SIRFSOC_UART + bool + depends on ARCH_SIRF + config DEBUG_LL_INCLUDE string default "debug/sa1100.S" if DEBUG_SA1100 @@ -1206,7 +1246,7 @@ config DEBUG_LL_INCLUDE default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4 default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART default "debug/s5pv210.S" if DEBUG_S5PV210_UART - default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 + default "debug/sirf.S" if DEBUG_SIRFSOC_UART default "debug/sti.S" if DEBUG_STI_UART default "debug/tegra.S" if DEBUG_TEGRA_UART default "debug/ux500.S" if DEBUG_UX500_UART @@ -1262,7 +1302,10 @@ config DEBUG_UART_PHYS default 0x11009000 if DEBUG_MT8135_UART3 default 0x16000000 if ARCH_INTEGRATOR default 0x18000300 if DEBUG_BCM_5301X + default 0x18010000 if DEBUG_SIRFATLAS7_UART0 + default 0x18020000 if DEBUG_SIRFATLAS7_UART1 default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 + default 0x20001000 if DEBUG_HIP01_UART default 0x20060000 if DEBUG_RK29_UART0 default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 @@ -1288,12 +1331,13 @@ config DEBUG_UART_PHYS default 0x808c0000 if ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART default 0xa9a00000 if DEBUG_MSM_UART + default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1 default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX default 0xc0013000 if DEBUG_U300_UART default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX - default 0xd0012000 if DEBUG_MVEBU_UART + default 0xd0012000 if DEBUG_MVEBU_UART0 default 0xc81004c0 if DEBUG_MESON_UARTAO default 0xd4017000 if DEBUG_MMP_UART2 default 0xd4018000 if DEBUG_MMP_UART3 @@ -1307,7 +1351,8 @@ config DEBUG_UART_PHYS default 0xe8008000 if DEBUG_R7S72100_SCIF2 default 0xf0000be0 if ARCH_EBSA110 default 0xf040ab00 if DEBUG_BRCMSTB_UART - default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE + default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE + default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_ORION5X default 0xf7fc9000 if DEBUG_BERLIN_UART @@ -1331,7 +1376,8 @@ config DEBUG_UART_PHYS DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \ DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ - DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART + DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \ + DEBUG_SIRFSOC_UART config DEBUG_UART_VIRT hex "Virtual base address of debug UART" @@ -1388,8 +1434,12 @@ config DEBUG_UART_VIRT default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 default 0xfeb31000 if DEBUG_KEYSTONE_UART1 default 0xfec02000 if DEBUG_SOCFPGA_UART - default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE + default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE + default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE + default 0xfec10000 if DEBUG_SIRFATLAS7_UART0 default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 + default 0xfec20000 if DEBUG_SIRFATLAS7_UART1 + default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1 default 0xfec90000 if DEBUG_RK32_UART2 default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 @@ -1405,11 +1455,12 @@ config DEBUG_UART_VIRT default 0xfef36000 if DEBUG_HIGHBANK_UART default 0xfefff700 if ARCH_IOP33X default 0xff003000 if DEBUG_U300_UART + default 0xffd01000 if DEBUG_HIP01_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ - DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART + DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || DEBUG_SIRFSOC_UART config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" |