diff options
Diffstat (limited to 'arch/arm/Kconfig')
| -rw-r--r-- | arch/arm/Kconfig | 250 |
1 files changed, 150 insertions, 100 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9d02cdb15b2..29475101a7b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -34,15 +34,12 @@ config SYS_SUPPORTS_APM_EMULATION config GENERIC_GPIO bool - default n config GENERIC_TIME bool - default n config GENERIC_CLOCKEVENTS bool - default n config GENERIC_CLOCKEVENTS_BROADCAST bool @@ -55,7 +52,6 @@ config MMU config NO_IOPORT bool - default n config EISA bool @@ -126,11 +122,9 @@ config RWSEM_XCHGADD_ALGORITHM config ARCH_HAS_ILOG2_U32 bool - default n config ARCH_HAS_ILOG2_U64 bool - default n config GENERIC_HWEIGHT bool @@ -253,6 +247,14 @@ config ARCH_CLPS711X help Support for Cirrus Logic 711x/721x based boards. +config ARCH_GEMINI + bool "Cortina Systems Gemini" + select CPU_FA526 + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Support for the Cortina Systems Gemini family SoCs + config ARCH_EBSA110 bool "EBSA-110" select CPU_SA110 @@ -277,14 +279,6 @@ config ARCH_EP93XX help This enables support for the Cirrus EP93xx series of CPUs. -config ARCH_GEMINI - bool "Cortina Systems Gemini" - select CPU_FA526 - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - Support for the Cortina Systems Gemini family SoCs - config ARCH_FOOTBRIDGE bool "FootBridge" select CPU_SA110 @@ -293,6 +287,30 @@ config ARCH_FOOTBRIDGE Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. +config ARCH_MXC + bool "Freescale MXC/iMX-based" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select ARCH_MTD_XIP + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK + help + Support for Freescale MXC/iMX-based family of processors + +config ARCH_STMP3XXX + bool "Freescale STMP3xxx" + select CPU_ARM926T + select HAVE_CLK + select COMMON_CLKDEV + select ARCH_REQUIRE_GPIOLIB + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select GENERIC_GPIO + select USB_ARCH_HAS_EHCI + help + Support for systems based on the Freescale 3xxx CPUs. + config ARCH_NETX bool "Hilscher NetX based" select CPU_ARM926T @@ -309,15 +327,6 @@ config ARCH_H720X help This enables support for systems based on the Hynix HMS720x -config ARCH_IMX - bool "IMX" - select CPU_ARM920T - select GENERIC_GPIO - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - help - Support for Motorola's i.MX family of processors (MX1, MXL). - config ARCH_IOP13XX bool "IOP13xx-based" depends on MMU @@ -398,6 +407,7 @@ config ARCH_KIRKWOOD select CPU_FEROCEON select PCI select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME select GENERIC_CLOCKEVENTS select PLAT_ORION @@ -405,28 +415,6 @@ config ARCH_KIRKWOOD Support for the following Marvell Kirkwood series SoCs: 88F6180, 88F6192 and 88F6281. -config ARCH_KS8695 - bool "Micrel/Kendin KS8695" - select CPU_ARM922T - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based - System-on-Chip devices. - -config ARCH_NS9XXX - bool "NetSilicon NS9xxx" - select CPU_ARM926T - select GENERIC_GPIO - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - select HAVE_CLK - help - Say Y here if you intend to run this kernel on a NetSilicon NS9xxx - System. - - <http://www.digi.com/products/microprocessors/index.jsp> - config ARCH_LOKI bool "Marvell Loki (88RC8480)" select CPU_FEROCEON @@ -441,6 +429,7 @@ config ARCH_MV78XX0 select CPU_FEROCEON select PCI select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME select GENERIC_CLOCKEVENTS select PLAT_ORION @@ -448,23 +437,13 @@ config ARCH_MV78XX0 Support for the following Marvell MV78xx0 series SoCs: MV781x0, MV782x0. -config ARCH_MXC - bool "Freescale MXC/iMX-based" - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - select ARCH_MTD_XIP - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK - help - Support for Freescale MXC/iMX-based family of processors - config ARCH_ORION5X bool "Marvell Orion" depends on MMU select CPU_FEROCEON select PCI select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME select GENERIC_CLOCKEVENTS select PLAT_ORION @@ -473,6 +452,52 @@ config ARCH_ORION5X Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), Orion-2 (5281), Orion-1-90 (6183). +config ARCH_MMP + bool "Marvell PXA168/910" + depends on MMU + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK + select COMMON_CLKDEV + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select TICK_ONESHOT + select PLAT_PXA + help + Support for Marvell's PXA168/910 processor line. + +config ARCH_KS8695 + bool "Micrel/Kendin KS8695" + select CPU_ARM922T + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based + System-on-Chip devices. + +config ARCH_NS9XXX + bool "NetSilicon NS9xxx" + select CPU_ARM926T + select GENERIC_GPIO + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select HAVE_CLK + help + Say Y here if you intend to run this kernel on a NetSilicon NS9xxx + System. + + <http://www.digi.com/products/microprocessors/index.jsp> + +config ARCH_W90X900 + bool "Nuvoton W90X900 CPU" + select CPU_ARM926T + select ARCH_REQUIRE_GPIOLIB + select GENERIC_GPIO + select COMMON_CLKDEV + help + Support for Nuvoton (Winbond logic dept.) ARM9 processor,You + can login www.mcuos.com or www.nuvoton.com to know more. + config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" select CPU_ARM926T @@ -495,19 +520,16 @@ config ARCH_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -config ARCH_MMP - bool "Marvell PXA168/910" - depends on MMU - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK - select COMMON_CLKDEV +config ARCH_MSM + bool "Qualcomm MSM" + select CPU_V6 select GENERIC_TIME select GENERIC_CLOCKEVENTS - select TICK_ONESHOT - select PLAT_PXA help - Support for Marvell's PXA168/910 processor line. + Support for Qualcomm MSM7K based systems. This runs on the ARM11 + apps processor of the MSM7K and depends on a shared memory + interface to the ARM9 modem processor which runs the baseband stack + and controls some vital subsystems (clock and power control, etc). config ARCH_RPC bool "RiscPC" @@ -576,6 +598,20 @@ config ARCH_LH7A40X core with a wide array of integrated devices for hand-held and low-power applications. +config ARCH_U300 + bool "ST-Ericsson U300 Series" + depends on MMU + select CPU_ARM926T + select ARM_AMBA + select ARM_VIC + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select HAVE_CLK + select COMMON_CLKDEV + select GENERIC_GPIO + help + Support for ST-Ericsson U300 series mobile platforms. + config ARCH_DAVINCI bool "TI DaVinci" select CPU_ARM926T @@ -587,6 +623,7 @@ config ARCH_DAVINCI select ZONE_DMA select HAVE_IDE select COMMON_CLKDEV + select GENERIC_ALLOCATOR help Support for TI's DaVinci platform. @@ -600,24 +637,6 @@ config ARCH_OMAP help Support for TI's OMAP platform (OMAP1 and OMAP2). -config ARCH_MSM - bool "Qualcomm MSM" - select CPU_V6 - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - help - Support for Qualcomm MSM7K based systems. This runs on the ARM11 - apps processor of the MSM7K and depends on a shared memory - interface to the ARM9 modem processor which runs the baseband stack - and controls some vital subsystems (clock and power control, etc). - -config ARCH_W90X900 - bool "Nuvoton W90X900 CPU" - select CPU_ARM926T - help - Support for Nuvoton (Winbond logic dept.) ARM9 processor,You - can login www.mcuos.com or www.nuvoton.com to know more. - endchoice source "arch/arm/mach-clps711x/Kconfig" @@ -681,9 +700,9 @@ source "arch/arm/mach-s3c6400/Kconfig" source "arch/arm/mach-s3c6410/Kconfig" endif -source "arch/arm/mach-lh7a40x/Kconfig" +source "arch/arm/plat-stmp3xxx/Kconfig" -source "arch/arm/mach-imx/Kconfig" +source "arch/arm/mach-lh7a40x/Kconfig" source "arch/arm/mach-h720x/Kconfig" @@ -707,6 +726,8 @@ source "arch/arm/mach-ks8695/Kconfig" source "arch/arm/mach-msm/Kconfig" +source "arch/arm/mach-u300/Kconfig" + source "arch/arm/mach-w90x900/Kconfig" # Definitions to make life easier @@ -859,8 +880,11 @@ source "kernel/time/Kconfig" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" - depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP) + depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\ + MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4) + depends on GENERIC_CLOCKEVENTS select USE_GENERIC_SMP_HELPERS + select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4) help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -878,6 +902,18 @@ config SMP If you don't know what to do here, say N. +config HAVE_ARM_SCU + bool + depends on SMP + help + This option enables support for the ARM system coherency unit + +config HAVE_ARM_TWD + bool + depends on SMP + help + This options enables support for the ARM timer and watchdog unit + choice prompt "Memory split" default VMSPLIT_3G @@ -916,8 +952,10 @@ config HOTPLUG_CPU config LOCAL_TIMERS bool "Use local timer interrupts" - depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP) + depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \ + REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4) default y + select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4) help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system @@ -979,7 +1017,6 @@ config OABI_COMPAT config ARCH_HAS_HOLES_MEMORYMODEL bool - default n # Discontigmem is deprecated config ARCH_DISCONTIGMEM_ENABLE @@ -1022,12 +1059,12 @@ source "mm/Kconfig" config LEDS bool "Timer and CPU usage LEDs" depends on ARCH_CDB89712 || ARCH_EBSA110 || \ - ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ + ARCH_EBSA285 || ARCH_INTEGRATOR || \ ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ ARCH_AT91 || ARCH_DAVINCI || \ - ARCH_KS8695 || MACH_RD88F5182 + ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW help If you say Y here, the LEDs on your machine will be used to provide useful information about your current system status. @@ -1085,6 +1122,22 @@ config ALIGNMENT_TRAP correct operation of some network protocols. With an IP-only configuration it is safe to say N, otherwise say Y. +config UACCESS_WITH_MEMCPY + bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)" + depends on MMU && EXPERIMENTAL + default y if CPU_FEROCEON + help + Implement faster copy_to_user and clear_user methods for CPU + cores where a 8-word STM instruction give significantly higher + memory write throughput than a sequence of individual 32bit stores. + + A possible side effect is a slight increase in scheduling latency + between threads sharing the same address space if they invoke + such copy operations with large buffers. + + However, if the CPU data cache is using a write-allocate mode, + this option is unlikely to provide any performance gain. + endmenu menu "Boot options" @@ -1188,7 +1241,7 @@ endmenu menu "CPU Power Management" -if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA) +if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA) source "drivers/cpufreq/Kconfig" @@ -1213,14 +1266,11 @@ config CPU_FREQ_INTEGRATOR If in doubt, say Y. -config CPU_FREQ_IMX - tristate "CPUfreq driver for i.MX CPUs" - depends on ARCH_IMX && CPU_FREQ - default n - help - This enables the CPUfreq driver for i.MX CPUs. - - If in doubt, say N. +config CPU_FREQ_PXA + bool + depends on CPU_FREQ && ARCH_PXA && PXA25x + default y + select CPU_FREQ_DEFAULT_GOV_USERSPACE endif |