diff options
Diffstat (limited to 'arch/arm/Kconfig')
| -rw-r--r-- | arch/arm/Kconfig | 178 |
1 files changed, 63 insertions, 115 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 503da0a2a8e..87b63fde06d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -24,14 +24,15 @@ config ARM select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select HARDIRQS_SW_RESEND + select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT) select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_KGDB select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT) select HAVE_ARCH_TRACEHOOK select HAVE_BPF_JIT + select HAVE_CC_STACKPROTECTOR select HAVE_CONTEXT_TRACKING select HAVE_C_RECORDMCOUNT - select HAVE_CC_STACKPROTECTOR select HAVE_DEBUG_KMEMLEAK select HAVE_DMA_API_DEBUG select HAVE_DMA_ATTRS @@ -113,9 +114,6 @@ config ARM_DMA_IOMMU_ALIGNMENT endif -config HAVE_PWM - bool - config MIGHT_HAVE_PCI bool @@ -129,7 +127,7 @@ config HAVE_TCM config HAVE_PROC_CPU bool -config NO_IOPORT +config NO_IOPORT_MAP bool config EISA @@ -167,12 +165,9 @@ config TRACE_IRQFLAGS_SUPPORT bool default y -config RWSEM_GENERIC_SPINLOCK - bool - default y - config RWSEM_XCHGADD_ALGORITHM bool + default y config ARCH_HAS_ILOG2_U32 bool @@ -207,6 +202,9 @@ config ZONE_DMA config NEED_DMA_MAP_STATE def_bool y +config ARCH_SUPPORTS_UPROBES + def_bool y + config ARCH_HAS_DMA_SET_COHERENT_MASK bool @@ -306,9 +304,14 @@ choice config ARCH_MULTIPLATFORM bool "Allow multiple platforms to be selected" depends on MMU + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_HAS_SG_CHAIN select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR + select CLKSRC_OF select COMMON_CLK + select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_PCI select MULTI_IRQ_HANDLER select SPARSE_IRQ select USE_OF @@ -371,7 +374,6 @@ config ARCH_AT91 select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select IRQ_DOMAIN - select NEED_MACH_GPIO_H select NEED_MACH_IO_H if PCCARD select PINCTRL select PINCTRL_AT91 if USE_OF @@ -388,8 +390,6 @@ config ARCH_CLPS711X select CPU_ARM720T select GENERIC_CLOCKEVENTS select MFD_SYSCON - select MULTI_IRQ_HANDLER - select SPARSE_IRQ help Support for Cirrus Logic 711x/721x/731x based boards. @@ -409,7 +409,7 @@ config ARCH_EBSA110 select ISA select NEED_MACH_IO_H select NEED_MACH_MEMORY_H - select NO_IOPORT + select NO_IOPORT_MAP help This is an evaluation board for the StrongARM processor available from Digital. It has limited hardware on-board, including an @@ -421,15 +421,13 @@ config ARCH_EFM32 depends on !MMU select ARCH_REQUIRE_GPIOLIB select ARM_NVIC - # CLKSRC_MMIO is wrong here, but needed until a proper fix is merged, - # i.e. CLKSRC_EFM32 selecting CLKSRC_MMIO - select CLKSRC_MMIO + select AUTO_ZRELADDR select CLKSRC_OF select COMMON_CLK select CPU_V7M select GENERIC_CLOCKEVENTS select NO_DMA - select NO_IOPORT + select NO_IOPORT_MAP select SPARSE_IRQ select USE_OF help @@ -479,6 +477,7 @@ config ARCH_IOP13XX select PCI select PLAT_IOP select VMSPLIT_1G + select SPARSE_IRQ help Support for Intel's IOP13XX (XScale) family of processors. @@ -511,8 +510,8 @@ config ARCH_IXP4XX bool "IXP4xx-based" depends on MMU select ARCH_HAS_DMA_SET_COHERENT_MASK - select ARCH_SUPPORTS_BIG_ENDIAN select ARCH_REQUIRE_GPIOLIB + select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO select CPU_XSCALE select DMABOUNCE if PCI @@ -631,7 +630,6 @@ config ARCH_LPC32XX select CPU_ARM926T select GENERIC_CLOCKEVENTS select HAVE_IDE - select HAVE_PWM select USE_OF help Support for the NXP LPC32XX family of processors @@ -655,9 +653,8 @@ config ARCH_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -config ARCH_MSM_NODT - bool "Qualcomm MSM" - select ARCH_MSM +config ARCH_MSM + bool "Qualcomm MSM (non-multiplatform)" select ARCH_REQUIRE_GPIOLIB select COMMON_CLK select GENERIC_CLOCKEVENTS @@ -680,7 +677,7 @@ config ARCH_SHMOBILE_LEGACY select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 select MULTI_IRQ_HANDLER - select NO_IOPORT + select NO_IOPORT_MAP select PINCTRL select PM_GENERIC_DOMAINS if PM select SPARSE_IRQ @@ -695,13 +692,14 @@ config ARCH_RPC select ARCH_MAY_HAVE_PC_FDC select ARCH_SPARSEMEM_ENABLE select ARCH_USES_GETTIMEOFFSET + select CPU_SA110 select FIQ select HAVE_IDE select HAVE_PATA_PLATFORM select ISA_DMA_API select NEED_MACH_IO_H select NEED_MACH_MEMORY_H - select NO_IOPORT + select NO_IOPORT_MAP select VIRT_TO_BUS help On the Acorn Risc-PC, Linux can support the internal IDE disk and @@ -729,6 +727,7 @@ config ARCH_S3C24XX bool "Samsung S3C24XX SoCs" select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB + select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM select GENERIC_CLOCKEVENTS @@ -751,18 +750,19 @@ config ARCH_S3C64XX select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC + select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM - select COMMON_CLK + select COMMON_CLK_SAMSUNG select CPU_V6K select GENERIC_CLOCKEVENTS select GPIO_SAMSUNG select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_TCM - select NO_IOPORT + select NO_IOPORT_MAP select PLAT_SAMSUNG - select PM_GENERIC_DOMAINS + select PM_GENERIC_DOMAINS if PM select S3C_DEV_NAND select S3C_GPIO_TRACK select SAMSUNG_ATAGS @@ -773,6 +773,7 @@ config ARCH_S3C64XX config ARCH_S5P64X0 bool "Samsung S5P6440 S5P6450" + select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM select CPU_V6 @@ -791,6 +792,7 @@ config ARCH_S5P64X0 config ARCH_S5PC100 bool "Samsung S5PC100" select ARCH_REQUIRE_GPIOLIB + select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM select CPU_V7 @@ -810,6 +812,7 @@ config ARCH_S5PV210 select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_SPARSEMEM_ENABLE + select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM select CPU_V7 @@ -824,25 +827,6 @@ config ARCH_S5PV210 help Samsung S5PV210/S5PC110 series based systems -config ARCH_EXYNOS - bool "Samsung EXYNOS" - select ARCH_HAS_CPUFREQ - select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_REQUIRE_GPIOLIB - select ARCH_SPARSEMEM_ENABLE - select ARM_GIC - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS - select NEED_MACH_MEMORY_H - select SPARSE_IRQ - select USE_OF - help - Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) - config ARCH_DAVINCI bool "TI DaVinci" select ARCH_HAS_HOLES_MEMORYMODEL @@ -883,6 +867,12 @@ menu "Multiple platform selection" comment "CPU Core family selection" +config ARCH_MULTI_V4 + bool "ARMv4 based platforms (FA526)" + depends on !ARCH_MULTI_V6_V7 + select ARCH_MULTI_V4_V5 + select CPU_FA526 + config ARCH_MULTI_V4T bool "ARMv4T based platforms (ARM720T, ARM920T, ...)" depends on !ARCH_MULTI_V6_V7 @@ -895,7 +885,7 @@ config ARCH_MULTI_V5 bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)" depends on !ARCH_MULTI_V6_V7 select ARCH_MULTI_V4_V5 - select CPU_ARM926T if (!CPU_ARM946E || CPU_ARM1020 || \ + select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \ CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \ CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON) @@ -905,16 +895,18 @@ config ARCH_MULTI_V4_V5 config ARCH_MULTI_V6 bool "ARMv6 based platforms (ARM11)" select ARCH_MULTI_V6_V7 - select CPU_V6 + select CPU_V6K config ARCH_MULTI_V7 bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" default y select ARCH_MULTI_V6_V7 select CPU_V7 + select HAVE_SMP config ARCH_MULTI_V6_V7 bool + select MIGHT_HAVE_CACHE_L2X0 config ARCH_MULTI_CPU_AUTO def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7) @@ -922,6 +914,13 @@ config ARCH_MULTI_CPU_AUTO endmenu +config ARCH_VIRT + bool "Dummy Virtual Machine" if ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_PSCI + select HAVE_ARM_ARCH_TIMER + # # This is sorted alphabetically by mach-* pathname. However, plat-* # Kconfigs may be included either alphabetically (according to the @@ -931,9 +930,9 @@ source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/mach-at91/Kconfig" -source "arch/arm/mach-bcm/Kconfig" +source "arch/arm/mach-axxia/Kconfig" -source "arch/arm/mach-bcm2835/Kconfig" +source "arch/arm/mach-bcm/Kconfig" source "arch/arm/mach-berlin/Kconfig" @@ -1002,6 +1001,8 @@ source "arch/arm/plat-pxa/Kconfig" source "arch/arm/mach-mmp/Kconfig" +source "arch/arm/mach-qcom/Kconfig" + source "arch/arm/mach-realview/Kconfig" source "arch/arm/mach-rockchip/Kconfig" @@ -1045,8 +1046,6 @@ source "arch/arm/mach-versatile/Kconfig" source "arch/arm/mach-vexpress/Kconfig" source "arch/arm/plat-versatile/Kconfig" -source "arch/arm/mach-virt/Kconfig" - source "arch/arm/mach-vt8500/Kconfig" source "arch/arm/mach-w90x900/Kconfig" @@ -1087,15 +1086,10 @@ source "arch/arm/firmware/Kconfig" source arch/arm/mm/Kconfig -config ARM_NR_BANKS - int - default 16 if ARCH_EP93XX - default 8 - config IWMMXT - bool "Enable iWMMXt support" if !CPU_PJ4 - depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 - default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 + bool "Enable iWMMXt support" + depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B + default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B help Enable support for iWMMXt context switching at run time if running on a CPU that supports it. @@ -1212,19 +1206,6 @@ config ARM_ERRATA_742231 register of the Cortex-A9 which reduces the linefill issuing capabilities of the processor. -config PL310_ERRATA_588369 - bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines" - depends on CACHE_L2X0 - help - The PL310 L2 cache controller implements three types of Clean & - Invalidate maintenance operations: by Physical Address - (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC). - They are architecturally defined to behave as the execution of a - clean operation followed immediately by an invalidate operation, - both performing to the same memory location. This functionality - is not correctly implemented in PL310 as clean lines are not - invalidated as a result of these operations. - config ARM_ERRATA_643719 bool "ARM errata: LoUIS bit field in CLIDR register is incorrect" depends on CPU_V7 && SMP @@ -1247,17 +1228,6 @@ config ARM_ERRATA_720789 tables. The workaround changes the TLB flushing routines to invalidate entries regardless of the ASID. -config PL310_ERRATA_727915 - bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption" - depends on CACHE_L2X0 - help - PL310 implements the Clean & Invalidate by Way L2 cache maintenance - operation (offset 0x7FC). This operation runs in background so that - PL310 can handle normal accesses while it is in progress. Under very - rare circumstances, due to this erratum, write data can be lost when - PL310 treats a cacheable write transaction during a Clean & - Invalidate by Way operation. - config ARM_ERRATA_743622 bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption" depends on CPU_V7 @@ -1283,21 +1253,6 @@ config ARM_ERRATA_751472 operation is received by a CPU before the ICIALLUIS has completed, potentially leading to corrupted entries in the cache or TLB. -config PL310_ERRATA_753970 - bool "PL310 errata: cache sync operation may be faulty" - depends on CACHE_PL310 - help - This option enables the workaround for the 753970 PL310 (r3p0) erratum. - - Under some condition the effect of cache sync operation on - the store buffer still remains when the operation completes. - This means that the store buffer is always asked to drain and - this prevents it from merging any further writes. The workaround - is to replace the normal offset of cache sync operation (0x730) - by another offset targeting an unmapped PL310 register 0x740. - This has the same effect as the cache sync operation: store buffer - drain and waiting for all buffers empty. - config ARM_ERRATA_754322 bool "ARM errata: possible faulty MMU translations following an ASID switch" depends on CPU_V7 @@ -1346,18 +1301,6 @@ config ARM_ERRATA_764369 relevant cache maintenance functions and sets a specific bit in the diagnostic control register of the SCU. -config PL310_ERRATA_769419 - bool "PL310 errata: no automatic Store Buffer drain" - depends on CACHE_L2X0 - help - On revisions of the PL310 prior to r3p2, the Store Buffer does - not automatically drain. This can cause normal, non-cacheable - writes to be retained when the memory system is idle, leading - to suboptimal I/O performance for drivers using coherent DMA. - This option adds a write barrier to the cpu_idle loop so that, - on systems with an outer cache, the store buffer is drained - explicitly. - config ARM_ERRATA_775420 bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock" depends on CPU_V7 @@ -1558,8 +1501,8 @@ config BIG_LITTLE config BL_SWITCHER bool "big.LITTLE switcher support" depends on BIG_LITTLE && MCPM && HOTPLUG_CPU - select CPU_PM select ARM_CPU_SUSPEND + select CPU_PM help The big.LITTLE "switcher" provides the core functionality to transparently handle transition between a cluster of A15's @@ -1628,9 +1571,9 @@ config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX + default 416 if ARCH_SUNXI default 392 if ARCH_U8500 default 352 if ARCH_VT8500 - default 288 if ARCH_SUNXI default 264 if MACH_H4700 default 0 help @@ -1903,9 +1846,9 @@ config XEN depends on CPU_V7 && !CPU_V6 depends on !GENERIC_ATOMIC64 depends on MMU + select ARCH_DMA_ADDR_T_64BIT select ARM_PSCI select SWIOTLB_XEN - select ARCH_DMA_ADDR_T_64BIT help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. @@ -2271,12 +2214,17 @@ source "kernel/power/Kconfig" config ARCH_SUSPEND_POSSIBLE depends on !ARCH_S5PC100 depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \ - CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK + CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK def_bool y config ARM_CPU_SUSPEND def_bool PM_SLEEP +config ARCH_HIBERNATION_POSSIBLE + bool + depends on MMU + default y if ARCH_SUSPEND_POSSIBLE + endmenu source "net/Kconfig" |