diff options
Diffstat (limited to 'arch/arm/Kconfig')
| -rw-r--r-- | arch/arm/Kconfig | 122 |
1 files changed, 75 insertions, 47 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 67874b82a4e..6ec8eb3149e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -4,6 +4,7 @@ config ARM select ARCH_BINFMT_ELF_RANDOMIZE_PIE select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_HAVE_CUSTOM_GPIO_H + select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_WANT_IPC_PARSE_VERSION select BUILDTIME_EXTABLE_SORT if MMU select CPU_PM if (SUSPEND || CPU_IDLE) @@ -36,7 +37,6 @@ config ARM select HAVE_GENERIC_HARDIRQS select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) select HAVE_IDE if PCI || ISA || PCMCIA - select HAVE_IRQ_WORK select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZMA select HAVE_KERNEL_LZO @@ -56,6 +56,8 @@ config ARM select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND select MODULES_USE_ELF_REL select CLONE_BACKWARDS + select OLD_SIGSUSPEND3 + select OLD_SIGACTION help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -75,6 +77,27 @@ config ARM_DMA_USE_IOMMU select ARM_HAS_SG_CHAIN select NEED_SG_DMA_LENGTH +if ARM_DMA_USE_IOMMU + +config ARM_DMA_IOMMU_ALIGNMENT + int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers" + range 4 9 + default 8 + help + DMA mapping framework by default aligns all buffers to the smallest + PAGE_SIZE order which is greater than or equal to the requested buffer + size. This works well for buffers up to a few hundreds kilobytes, but + for larger buffers it just a waste of address space. Drivers which has + relatively small addressing window (like 64Mib) might run out of + virtual space with just a few allocations. + + With this parameter you can specify the maximum PAGE_SIZE order for + DMA IOMMU buffers. Larger buffers will be aligned only to this + specified order. The order is expressed as a power of two multiplied + by the PAGE_SIZE. + +endif + config HAVE_PWM bool @@ -261,7 +284,8 @@ config MMU # choice prompt "ARM system type" - default ARCH_MULTIPLATFORM + default ARCH_VERSATILE if !MMU + default ARCH_MULTIPLATFORM if MMU config ARCH_MULTIPLATFORM bool "Allow multiple platforms to be selected" @@ -344,10 +368,10 @@ config ARCH_BCM2835 select ARM_ERRATA_411920 select ARM_TIMER_SP804 select CLKDEV_LOOKUP + select CLKSRC_OF select COMMON_CLK select CPU_V6 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select MULTI_IRQ_HANDLER select PINCTRL select PINCTRL_BCM2835 @@ -393,6 +417,7 @@ config ARCH_GEMINI config ARCH_SIRF bool "CSR SiRF" select ARCH_REQUIRE_GPIOLIB + select AUTO_ZRELADDR select COMMON_CLK select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP @@ -640,11 +665,12 @@ config ARCH_LPC32XX config ARCH_TEGRA bool "NVIDIA Tegra" select ARCH_HAS_CPUFREQ + select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO + select CLKSRC_OF select COMMON_CLK select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 @@ -698,6 +724,7 @@ config ARCH_SHMOBILE select MULTI_IRQ_HANDLER select NEED_MACH_MEMORY_H select NO_IOPORT + select PINCTRL select PM_GENERIC_DOMAINS if PM select SPARSE_IRQ help @@ -744,7 +771,6 @@ config ARCH_S3C24XX select ARCH_HAS_CPUFREQ select ARCH_USES_GETTIMEOFFSET select CLKDEV_LOOKUP - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -787,7 +813,6 @@ config ARCH_S5P64X0 select CLKSRC_MMIO select CPU_V6 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -802,7 +827,6 @@ config ARCH_S5PC100 select ARCH_USES_GETTIMEOFFSET select CLKDEV_LOOKUP select CPU_V7 - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -820,7 +844,6 @@ config ARCH_S5PV210 select CLKSRC_MMIO select CPU_V7 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -838,7 +861,6 @@ config ARCH_EXYNOS select CLKDEV_LOOKUP select CPU_V7 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -873,7 +895,6 @@ config ARCH_U300 select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_TCM select SPARSE_IRQ help @@ -899,10 +920,12 @@ config ARCH_NOMADIK select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC + select CLKSRC_NOMADIK_MTU select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS select MIGHT_HAVE_CACHE_L2X0 + select USE_OF select PINCTRL select PINCTRL_STN8815 select SPARSE_IRQ @@ -937,33 +960,24 @@ config ARCH_DAVINCI help Support for TI's DaVinci platform. -config ARCH_OMAP - bool "TI OMAP" +config ARCH_OMAP1 + bool "TI OMAP1" depends on MMU select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_REQUIRE_GPIOLIB - select CLKSRC_MMIO - select GENERIC_CLOCKEVENTS - select HAVE_CLK - help - Support for TI's OMAP platform (OMAP1/2/3/4). - -config ARCH_VT8500_SINGLE - bool "VIA/WonderMedia 85xx" - select ARCH_HAS_CPUFREQ + select ARCH_OMAP select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP - select COMMON_CLK - select CPU_ARM926T + select CLKSRC_MMIO select GENERIC_CLOCKEVENTS - select GENERIC_GPIO + select GENERIC_IRQ_CHIP select HAVE_CLK - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - select USE_OF + select HAVE_IDE + select IRQ_DOMAIN + select NEED_MACH_IO_H if PCCARD + select NEED_MACH_MEMORY_H help - Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. + Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx) endchoice @@ -1086,17 +1100,12 @@ source "arch/arm/mach-realview/Kconfig" source "arch/arm/mach-sa1100/Kconfig" source "arch/arm/plat-samsung/Kconfig" -source "arch/arm/plat-s3c24xx/Kconfig" source "arch/arm/mach-socfpga/Kconfig" source "arch/arm/plat-spear/Kconfig" source "arch/arm/mach-s3c24xx/Kconfig" -if ARCH_S3C24XX -source "arch/arm/mach-s3c2412/Kconfig" -source "arch/arm/mach-s3c2440/Kconfig" -endif if ARCH_S3C64XX source "arch/arm/mach-s3c64xx/Kconfig" @@ -1127,6 +1136,8 @@ source "arch/arm/mach-versatile/Kconfig" source "arch/arm/mach-vexpress/Kconfig" source "arch/arm/plat-versatile/Kconfig" +source "arch/arm/mach-virt/Kconfig" + source "arch/arm/mach-vt8500/Kconfig" source "arch/arm/mach-w90x900/Kconfig" @@ -1450,6 +1461,10 @@ config ISA_DMA bool select ISA_DMA_API +config ARCH_NO_VIRT_TO_BUS + def_bool y + depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK + # Select ISA DMA interface config ISA_DMA_API bool @@ -1531,7 +1546,6 @@ config SMP config SMP_ON_UP bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)" - depends on EXPERIMENTAL depends on SMP && !XIP_KERNEL default y help @@ -1572,9 +1586,10 @@ config HAVE_ARM_SCU help This option enables support for the ARM system coherency unit -config ARM_ARCH_TIMER +config HAVE_ARM_ARCH_TIMER bool "Architected timer support" depends on CPU_V7 + select ARM_ARCH_TIMER help This option enables support for the ARM architected timer @@ -1620,6 +1635,16 @@ config HOTPLUG_CPU Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. +config ARM_PSCI + bool "Support for the ARM Power State Coordination Interface (PSCI)" + depends on CPU_V7 + help + Say Y here if you want Linux to communicate with system firmware + implementing the PSCI specification for CPU-centric power + management operations described in ARM document number ARM DEN + 0022A ("Power State Coordination Interface System Software on + ARM processors"). + config LOCAL_TIMERS bool "Use local timer interrupts" depends on SMP @@ -1637,7 +1662,7 @@ config ARCH_NR_GPIO default 355 if ARCH_U8500 default 264 if MACH_H4700 default 512 if SOC_OMAP5 - default 288 if ARCH_VT8500 + default 288 if ARCH_VT8500 || ARCH_SUNXI default 0 help Maximum number of GPIOs in the system. @@ -1655,6 +1680,9 @@ config HZ default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE default 100 +config SCHED_HRTICK + def_bool HIGH_RES_TIMERS + config THUMB2_KERNEL bool "Compile the kernel in Thumb-2 mode" depends on CPU_V7 && !CPU_V6 && !CPU_V6K @@ -1719,7 +1747,7 @@ config AEABI config OABI_COMPAT bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" - depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL + depends on AEABI && !THUMB2_KERNEL default y help This option preserves the old syscall interface along with the @@ -1843,7 +1871,6 @@ config SECCOMP config CC_STACKPROTECTOR bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" - depends on EXPERIMENTAL help This option turns on the -fstack-protector GCC feature. This feature puts, at the beginning of functions, a canary value on @@ -1860,7 +1887,7 @@ config XEN_DOM0 config XEN bool "Xen guest support on ARM (EXPERIMENTAL)" - depends on EXPERIMENTAL && ARM && OF + depends on ARM && OF depends on CPU_V7 && !CPU_V6 help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. @@ -1929,7 +1956,7 @@ config ZBOOT_ROM choice prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)" - depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL + depends on ZBOOT_ROM && ARCH_SH7372 default ZBOOT_ROM_NONE help Include experimental SD/MMC loading code in the ROM-able zImage. @@ -1958,7 +1985,7 @@ endchoice config ARM_APPENDED_DTB bool "Use appended device tree blob to zImage (EXPERIMENTAL)" - depends on OF && !ZBOOT_ROM && EXPERIMENTAL + depends on OF && !ZBOOT_ROM help With this option, the boot code will look for a device tree binary (DTB) appended to zImage @@ -2076,7 +2103,7 @@ config XIP_PHYS_ADDR config KEXEC bool "Kexec system call (EXPERIMENTAL)" - depends on EXPERIMENTAL && (!SMP || HOTPLUG_CPU) + depends on (!SMP || HOTPLUG_CPU) help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot @@ -2098,7 +2125,6 @@ config ATAGS_PROC config CRASH_DUMP bool "Build kdump crash kernel (EXPERIMENTAL)" - depends on EXPERIMENTAL help Generate crash dump after being started by kexec. This should be normally only set in special crash dump kernels which are @@ -2165,7 +2191,7 @@ config CPU_FREQ_S3C config CPU_FREQ_S3C24XX bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" - depends on ARCH_S3C24XX && CPU_FREQ && EXPERIMENTAL + depends on ARCH_S3C24XX && CPU_FREQ select CPU_FREQ_S3C help This enables the CPUfreq driver for the Samsung S3C24XX family @@ -2177,7 +2203,7 @@ config CPU_FREQ_S3C24XX config CPU_FREQ_S3C24XX_PLL bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" - depends on CPU_FREQ_S3C24XX && EXPERIMENTAL + depends on CPU_FREQ_S3C24XX help Compile in support for changing the PLL frequency from the S3C24XX series CPUfreq driver. The PLL takes time to settle @@ -2240,7 +2266,7 @@ config FPE_NWFPE_XP config FPE_FASTFPE bool "FastFPE math emulation (EXPERIMENTAL)" - depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL + depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 ---help--- Say Y here to include the FAST floating point emulator in the kernel. This is an experimental much faster emulator which now also has full @@ -2322,3 +2348,5 @@ source "security/Kconfig" source "crypto/Kconfig" source "lib/Kconfig" + +source "arch/arm/kvm/Kconfig" |