1 files changed, 95 insertions, 0 deletions
diff --git a/arch/arm/boot/compressed/sdhi-sh7372.c b/arch/arm/boot/compressed/sdhi-sh7372.c
new file mode 100644
index 00000000000..d403a8b24d7
--- /dev/null
+++ b/arch/arm/boot/compressed/sdhi-sh7372.c
@@ -0,0 +1,95 @@
+/*
+ * SuperH Mobile SDHI
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2010 Kuninori Morimoto
+ * Copyright (C) 2010 Simon Horman
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Parts inspired by u-boot
+ */
+
+#include <linux/io.h>
+#include <mach/mmc.h>
+#include <linux/mmc/boot.h>
+#include <linux/mmc/tmio.h>
+
+#include "sdhi-shmobile.h"
+
+#define PORT179CR       0xe60520b3
+#define PORT180CR       0xe60520b4
+#define PORT181CR       0xe60520b5
+#define PORT182CR       0xe60520b6
+#define PORT183CR       0xe60520b7
+#define PORT184CR       0xe60520b8
+
+#define SMSTPCR3        0xe615013c
+
+#define CR_INPUT_ENABLE 0x10
+#define CR_FUNCTION1    0x01
+
+#define SDHI1_BASE	(void __iomem *)0xe6860000
+#define SDHI_BASE	SDHI1_BASE
+
+/*  SuperH Mobile SDHI loader
+ *
+ * loads the zImage from an SD card starting from block 0
+ * on physical partition 1
+ *
+ * The image must be start with a vrl4 header and
+ * the zImage must start at offset 512 of the image. That is,
+ * at block 1 (=byte 512) of physical partition 1
+ *
+ * Use the following line to write the vrl4 formated zImage
+ * to an SD card
+ * # dd if=vrl4.out of=/dev/sdx bs=512
+ */
+asmlinkage void mmc_loader(unsigned short *buf, unsigned long len)
+{
+	int high_capacity;
+
+	mmc_init_progress();
+
+	mmc_update_progress(MMC_PROGRESS_ENTER);
+        /* Initialise SDHI1 */
+        /* PORT184CR: GPIO_FN_SDHICMD1 Control */
+        __raw_writeb(CR_FUNCTION1, PORT184CR);
+        /* PORT179CR: GPIO_FN_SDHICLK1 Control */
+        __raw_writeb(CR_INPUT_ENABLE|CR_FUNCTION1, PORT179CR);
+        /* PORT181CR: GPIO_FN_SDHID1_3 Control */
+        __raw_writeb(CR_FUNCTION1, PORT183CR);
+        /* PORT182CR: GPIO_FN_SDHID1_2 Control */
+        __raw_writeb(CR_FUNCTION1, PORT182CR);
+        /* PORT183CR: GPIO_FN_SDHID1_1 Control */
+        __raw_writeb(CR_FUNCTION1, PORT181CR);
+        /* PORT180CR: GPIO_FN_SDHID1_0 Control */
+        __raw_writeb(CR_FUNCTION1, PORT180CR);
+
+        /* Enable clock to SDHI1 hardware block */
+        __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 13), SMSTPCR3);
+
+	/* setup SDHI hardware */
+	mmc_update_progress(MMC_PROGRESS_INIT);
+	high_capacity = sdhi_boot_init(SDHI_BASE);
+	if (high_capacity < 0)
+		goto err;
+
+	mmc_update_progress(MMC_PROGRESS_LOAD);
+	/* load kernel */
+	if (sdhi_boot_do_read(SDHI_BASE, high_capacity,
+			      0, /* Kernel is at block 1 */
+			      (len + TMIO_BBS - 1) / TMIO_BBS, buf))
+		goto err;
+
+        /* Disable clock to SDHI1 hardware block */
+        __raw_writel(__raw_readl(SMSTPCR3) & (1 << 13), SMSTPCR3);
+
+	mmc_update_progress(MMC_PROGRESS_DONE);
+
+	return;
+err:
+	for(;;);
+}