summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/armada-370-netgear-rn104.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/armada-370-netgear-rn104.dts')
-rw-r--r--arch/arm/boot/dts/armada-370-netgear-rn104.dts131
1 files changed, 100 insertions, 31 deletions
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index b0b32f5fbeb..4e27587667b 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -11,6 +11,8 @@
/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
#include "armada-370.dtsi"
/ {
@@ -58,12 +60,12 @@
marvell,function = "gpio";
};
- backup_key_pin: backup-key-pin {
+ backup_button_pin: backup-button-pin {
marvell,pins = "mpp52";
marvell,function = "gpio";
};
- power_key_pin: power-key-pin {
+ power_button_pin: power-button-pin {
marvell,pins = "mpp62";
marvell,function = "gpio";
};
@@ -78,18 +80,18 @@
marvell,function = "gpio";
};
- reset_key_pin: reset-key-pin {
+ reset_button_pin: reset-button-pin {
marvell,pins = "mpp65";
marvell,function = "gpio";
};
};
mdio {
- phy0: ethernet-phy@0 {
+ phy0: ethernet-phy@0 { /* Marvell 88E1318 */
reg = <0>;
};
- phy1: ethernet-phy@1 {
+ phy1: ethernet-phy@1 { /* Marvell 88E1318 */
reg = <1>;
};
};
@@ -115,6 +117,11 @@
clock-frequency = <100000>;
status = "okay";
+ isl12057: isl12057@68 {
+ compatible = "isl,isl12057";
+ reg = <0x68>;
+ };
+
g762: g762@3e {
compatible = "gmt,g762";
reg = <0x3e>;
@@ -123,71 +130,133 @@
fan_startv = <1>;
pwm_polarity = <0>;
};
+
+ pca9554: pca9554@23 {
+ compatible = "nxp,pca9554";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x23>;
+ };
+ };
+
+ nand@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x180000>; /* 1.5MB */
+ read-only;
+ };
+
+ partition@180000 {
+ label = "u-boot-env";
+ reg = <0x180000 0x20000>; /* 128KB */
+ read-only;
+ };
+
+ partition@200000 {
+ label = "uImage";
+ reg = <0x0200000 0x600000>; /* 6MB */
+ };
+
+ partition@800000 {
+ label = "minirootfs";
+ reg = <0x0800000 0x400000>; /* 4MB */
+ };
+
+ /* Last MB is for the BBT, i.e. not writable */
+ partition@c00000 {
+ label = "ubifs";
+ reg = <0x0c00000 0x7400000>; /* 116MB */
+ };
};
};
};
clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- g762_clk: fixedclk {
+ g762_clk: g762-oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <8192>;
};
};
- gpio_leds {
+ gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&backup_led_pin &power_led_pin>;
pinctrl-names = "default";
- blue_backup_led {
+ blue-backup-led {
label = "rn104:blue:backup";
- gpios = <&gpio1 31 0>; /* GPIO 63 Active High */
+ gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- blue_power_led {
+ blue-power-led {
label = "rn104:blue:pwr";
- gpios = <&gpio2 0 1>; /* GPIO 64 Active Low */
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "keep";
};
+
+ blue-sata1-led {
+ label = "rn104:blue:sata1";
+ gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ blue-sata2-led {
+ label = "rn104:blue:sata2";
+ gpios = <&pca9554 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ blue-sata3-led {
+ label = "rn104:blue:sata3";
+ gpios = <&pca9554 2 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ blue-sata4-led {
+ label = "rn104:blue:sata4";
+ gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&backup_key_pin
- &power_key_pin
- &reset_key_pin>;
+ pinctrl-0 = <&backup_button_pin
+ &power_button_pin
+ &reset_button_pin>;
pinctrl-names = "default";
- button@1 {
+ backup-button {
label = "Backup Button";
- linux,code = <133>; /* KEY_COPY */
- gpios = <&gpio1 20 1>;
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
};
- button@2 {
+ power-button {
label = "Power Button";
- linux,code = <116>; /* KEY_POWER */
- gpios = <&gpio1 30 0>;
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
};
- button@3 {
+ reset-button {
label = "Reset Button";
- linux,code = <0x198>; /* KEY_RESTART */
- gpios = <&gpio2 1 1>;
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
};
};
- gpio_poweroff {
+ gpio-poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&poweroff>;
pinctrl-names = "default";
- gpios = <&gpio1 28 1>;
+ gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
};
};