diff options
Diffstat (limited to 'arch/arm/boot/dts/at91-sama5d3_xplained.dts')
| -rw-r--r-- | arch/arm/boot/dts/at91-sama5d3_xplained.dts | 74 |
1 files changed, 72 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index ce1375595e5..5b8e40400be 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -21,6 +21,14 @@ reg = <0x20000000 0x10000000>; }; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + ahb { apb { mmc0: mmc@f0000000 { @@ -34,7 +42,7 @@ }; spi0: spi@f0004000 { - cs-gpios = <&pioD 13 0>; + cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>; status = "okay"; }; @@ -43,11 +51,54 @@ }; i2c0: i2c@f0014000 { + pinctrl-0 = <&pinctrl_i2c0_pu>; status = "okay"; }; i2c1: i2c@f0018000 { status = "okay"; + + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + status = "okay"; + + regulators { + vcc_1v8_reg: DCDC_REG1 { + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_1v2_reg: DCDC_REG2 { + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_3v3_reg: DCDC_REG3 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddfuse_reg: LDO_REG1 { + regulator-name = "FUSE_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + vddana_reg: LDO_REG2 { + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; }; macb0: ethernet@f0028000 { @@ -55,6 +106,12 @@ status = "okay"; }; + pwm0: pwm@f002c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>; + status = "okay"; + }; + usart0: serial@f001c000 { status = "okay"; }; @@ -79,7 +136,7 @@ }; spi1: spi@f8008000 { - cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>; + cs-gpios = <&pioC 25 0>; status = "okay"; }; @@ -102,6 +159,7 @@ i2c2: i2c@f801c000 { dmas = <0>, <0>; /* Do not use DMA for i2c2 */ + pinctrl-0 = <&pinctrl_i2c2_pu>; status = "okay"; }; @@ -116,6 +174,18 @@ pinctrl@fffff200 { board { + pinctrl_i2c0_pu: i2c0_pu { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_i2c2_pu: i2c2_pu { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; + }; + pinctrl_mmc0_cd: mmc0_cd { atmel,pins = <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; |