summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/at91sam9g45.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/at91sam9g45.dtsi')
-rw-r--r--arch/arm/boot/dts/at91sam9g45.dtsi301
1 files changed, 257 insertions, 44 deletions
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 3add030d61f..0741caeeced 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -108,60 +108,243 @@
interrupts = <21 4 0>;
};
- pioA: gpio@fffff200 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff200 0x100>;
- interrupts = <2 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pinctrl@fffff200 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff200 0xfffff200 0xa00>;
+
+ atmel,mux-mask = <
+ /* A B */
+ 0xffffffff 0xffc003ff /* pioA */
+ 0xffffffff 0x800f8f00 /* pioB */
+ 0xffffffff 0x00000e00 /* pioC */
+ 0xffffffff 0xff0c1381 /* pioD */
+ 0xffffffff 0x81ffff81 /* pioE */
+ >;
+
+ /* shared pinctrl settings */
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins =
+ <1 12 0x1 0x0 /* PB12 periph A */
+ 1 13 0x1 0x0>; /* PB13 periph A */
+ };
+ };
- pioB: gpio@fffff400 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x100>;
- interrupts = <3 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ usart0 {
+ pinctrl_usart0: usart0-0 {
+ atmel,pins =
+ <1 19 0x1 0x1 /* PB19 periph A with pullup */
+ 1 18 0x1 0x0>; /* PB18 periph A */
+ };
+
+ pinctrl_usart0_rts: usart0_rts-0 {
+ atmel,pins =
+ <1 17 0x2 0x0>; /* PB17 periph B */
+ };
+
+ pinctrl_usart0_cts: usart0_cts-0 {
+ atmel,pins =
+ <1 15 0x2 0x0>; /* PB15 periph B */
+ };
+ };
- pioC: gpio@fffff600 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x100>;
- interrupts = <4 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ uart1 {
+ pinctrl_usart1: usart1-0 {
+ atmel,pins =
+ <1 4 0x1 0x1 /* PB4 periph A with pullup */
+ 1 5 0x1 0x0>; /* PB5 periph A */
+ };
+
+ pinctrl_usart1_rts: usart1_rts-0 {
+ atmel,pins =
+ <3 16 0x1 0x0>; /* PD16 periph A */
+ };
+
+ pinctrl_usart1_cts: usart1_cts-0 {
+ atmel,pins =
+ <3 17 0x1 0x0>; /* PD17 periph A */
+ };
+ };
- pioD: gpio@fffff800 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x100>;
- interrupts = <5 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ usart2 {
+ pinctrl_usart2: usart2-0 {
+ atmel,pins =
+ <1 6 0x1 0x1 /* PB6 periph A with pullup */
+ 1 7 0x1 0x0>; /* PB7 periph A */
+ };
+
+ pinctrl_usart2_rts: usart2_rts-0 {
+ atmel,pins =
+ <2 9 0x2 0x0>; /* PC9 periph B */
+ };
+
+ pinctrl_usart2_cts: usart2_cts-0 {
+ atmel,pins =
+ <2 11 0x2 0x0>; /* PC11 periph B */
+ };
+ };
- pioE: gpio@fffffa00 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffffa00 0x100>;
- interrupts = <5 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
+ usart3 {
+ pinctrl_usart3: usart3-0 {
+ atmel,pins =
+ <1 8 0x1 0x1 /* PB9 periph A with pullup */
+ 1 9 0x1 0x0>; /* PB8 periph A */
+ };
+
+ pinctrl_usart3_rts: usart3_rts-0 {
+ atmel,pins =
+ <0 23 0x2 0x0>; /* PA23 periph B */
+ };
+
+ pinctrl_usart3_cts: usart3_cts-0 {
+ atmel,pins =
+ <0 24 0x2 0x0>; /* PA24 periph B */
+ };
+ };
+
+ nand {
+ pinctrl_nand: nand-0 {
+ atmel,pins =
+ <2 8 0x0 0x1 /* PC8 gpio RDY pin pull_up*/
+ 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */
+ };
+ };
+
+ macb {
+ pinctrl_macb_rmii: macb_rmii-0 {
+ atmel,pins =
+ <0 10 0x1 0x0 /* PA10 periph A */
+ 0 11 0x1 0x0 /* PA11 periph A */
+ 0 12 0x1 0x0 /* PA12 periph A */
+ 0 13 0x1 0x0 /* PA13 periph A */
+ 0 14 0x1 0x0 /* PA14 periph A */
+ 0 15 0x1 0x0 /* PA15 periph A */
+ 0 16 0x1 0x0 /* PA16 periph A */
+ 0 17 0x1 0x0 /* PA17 periph A */
+ 0 18 0x1 0x0 /* PA18 periph A */
+ 0 19 0x1 0x0>; /* PA19 periph A */
+ };
+
+ pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+ atmel,pins =
+ <0 6 0x2 0x0 /* PA6 periph B */
+ 0 7 0x2 0x0 /* PA7 periph B */
+ 0 8 0x2 0x0 /* PA8 periph B */
+ 0 9 0x2 0x0 /* PA9 periph B */
+ 0 27 0x2 0x0 /* PA27 periph B */
+ 0 28 0x2 0x0 /* PA28 periph B */
+ 0 29 0x2 0x0 /* PA29 periph B */
+ 0 30 0x2 0x0>; /* PA30 periph B */
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+ atmel,pins =
+ <0 0 0x1 0x0 /* PA0 periph A */
+ 0 1 0x1 0x1 /* PA1 periph A with pullup */
+ 0 2 0x1 0x1>; /* PA2 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 3 0x1 0x1 /* PA3 periph A with pullup */
+ 0 4 0x1 0x1 /* PA4 periph A with pullup */
+ 0 5 0x1 0x1>; /* PA5 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+ atmel,pins =
+ <0 6 0x1 0x1 /* PA6 periph A with pullup */
+ 0 7 0x1 0x1 /* PA7 periph A with pullup */
+ 0 8 0x1 0x1 /* PA8 periph A with pullup */
+ 0 9 0x1 0x1>; /* PA9 periph A with pullup */
+ };
+ };
+
+ mmc1 {
+ pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+ atmel,pins =
+ <0 31 0x1 0x0 /* PA31 periph A */
+ 0 22 0x1 0x1 /* PA22 periph A with pullup */
+ 0 23 0x1 0x1>; /* PA23 periph A with pullup */
+ };
+
+ pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 24 0x1 0x1 /* PA24 periph A with pullup */
+ 0 25 0x1 0x1 /* PA25 periph A with pullup */
+ 0 26 0x1 0x1>; /* PA26 periph A with pullup */
+ };
+
+ pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 {
+ atmel,pins =
+ <0 27 0x1 0x1 /* PA27 periph A with pullup */
+ 0 28 0x1 0x1 /* PA28 periph A with pullup */
+ 0 29 0x1 0x1 /* PA29 periph A with pullup */
+ 0 20 0x1 0x1>; /* PA30 periph A with pullup */
+ };
+ };
+
+ pioA: gpio@fffff200 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff200 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioB: gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioC: gpio@fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <4 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioD: gpio@fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <5 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioE: gpio@fffffa00 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x200>;
+ interrupts = <5 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <1 4 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled";
};
@@ -171,6 +354,8 @@
interrupts = <7 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
@@ -180,6 +365,8 @@
interrupts = <8 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
@@ -189,6 +376,8 @@
interrupts = <9 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};
@@ -198,6 +387,8 @@
interrupts = <10 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart3>;
status = "disabled";
};
@@ -205,6 +396,8 @@
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffbc000 0x100>;
interrupts = <25 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb_rmii>;
status = "disabled";
};
@@ -262,6 +455,24 @@
trigger-value = <0x6>;
};
};
+
+ mmc0: mmc@fff80000 {
+ compatible = "atmel,hsmci";
+ reg = <0xfff80000 0x600>;
+ interrupts = <11 4 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@fffd0000 {
+ compatible = "atmel,hsmci";
+ reg = <0xfffd0000 0x600>;
+ interrupts = <29 4 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
nand0: nand@40000000 {
@@ -273,6 +484,8 @@
>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioC 8 0
&pioC 14 0
0