summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx28.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/imx28.dtsi')
-rw-r--r--arch/arm/boot/dts/imx28.dtsi427
1 files changed, 362 insertions, 65 deletions
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 4634cb861a5..3fa6d190fab 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -22,6 +22,11 @@
gpio4 = &gpio4;
saif0 = &saif0;
saif1 = &saif1;
+ serial0 = &auart0;
+ serial1 = &auart1;
+ serial2 = &auart2;
+ serial3 = &auart3;
+ serial4 = &auart4;
};
cpus {
@@ -52,57 +57,57 @@
};
hsadc@80002000 {
- reg = <0x80002000 2000>;
+ reg = <0x80002000 0x2000>;
interrupts = <13 87>;
status = "disabled";
};
dma-apbh@80004000 {
compatible = "fsl,imx28-dma-apbh";
- reg = <0x80004000 2000>;
+ reg = <0x80004000 0x2000>;
};
perfmon@80006000 {
- reg = <0x80006000 800>;
+ reg = <0x80006000 0x800>;
interrupts = <27>;
status = "disabled";
};
- bch@8000a000 {
- reg = <0x8000a000 2000>;
- interrupts = <41>;
- status = "disabled";
- };
-
- gpmi@8000c000 {
- reg = <0x8000c000 2000>;
- interrupts = <42 88>;
+ gpmi-nand@8000c000 {
+ compatible = "fsl,imx28-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <88>, <41>;
+ interrupt-names = "gpmi-dma", "bch";
+ fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
ssp0: ssp@80010000 {
- reg = <0x80010000 2000>;
+ reg = <0x80010000 0x2000>;
interrupts = <96 82>;
fsl,ssp-dma-channel = <0>;
status = "disabled";
};
ssp1: ssp@80012000 {
- reg = <0x80012000 2000>;
+ reg = <0x80012000 0x2000>;
interrupts = <97 83>;
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
ssp2: ssp@80014000 {
- reg = <0x80014000 2000>;
+ reg = <0x80014000 0x2000>;
interrupts = <98 84>;
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
ssp3: ssp@80016000 {
- reg = <0x80016000 2000>;
+ reg = <0x80016000 0x2000>;
interrupts = <99 85>;
fsl,ssp-dma-channel = <3>;
status = "disabled";
@@ -112,7 +117,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-pinctrl", "simple-bus";
- reg = <0x80018000 2000>;
+ reg = <0x80018000 0x2000>;
gpio0: gpio@0 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
@@ -161,7 +166,150 @@
duart_pins_a: duart@0 {
reg = <0>;
- fsl,pinmux-ids = <0x3102 0x3112>;
+ fsl,pinmux-ids = <
+ 0x3102 /* MX28_PAD_PWM0__DUART_RX */
+ 0x3112 /* MX28_PAD_PWM1__DUART_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ duart_pins_b: duart@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
+ 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ duart_4pins_a: duart-4pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
+ 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
+ 0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */
+ 0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ gpmi_pins_a: gpmi-nand@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */
+ 0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */
+ 0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */
+ 0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */
+ 0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */
+ 0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */
+ 0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */
+ 0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */
+ 0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */
+ 0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */
+ 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
+ 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
+ 0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */
+ 0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */
+ 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ gpmi_status_cfg: gpmi-status-cfg {
+ fsl,pinmux-ids = <
+ 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
+ 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
+ 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
+ >;
+ fsl,drive-strength = <2>;
+ };
+
+ auart0_pins_a: auart0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
+ 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
+ 0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */
+ 0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ auart0_2pins_a: auart0-2pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
+ 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ auart1_pins_a: auart1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
+ 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
+ 0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */
+ 0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ auart1_2pins_a: auart1-2pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
+ 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ auart2_2pins_a: auart2-2pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */
+ 0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ auart3_pins_a: auart3@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
+ 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
+ 0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */
+ 0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ auart3_2pins_a: auart3-2pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */
+ 0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */
+ >;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
@@ -169,9 +317,17 @@
mac0_pins_a: mac0@0 {
reg = <0>;
- fsl,pinmux-ids = <0x4000 0x4010 0x4020
- 0x4030 0x4040 0x4060 0x4070
- 0x4080 0x4100>;
+ fsl,pinmux-ids = <
+ 0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */
+ 0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */
+ 0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */
+ 0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */
+ 0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */
+ 0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */
+ 0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */
+ 0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */
+ 0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */
+ >;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
@@ -179,8 +335,14 @@
mac1_pins_a: mac1@0 {
reg = <0>;
- fsl,pinmux-ids = <0x40f1 0x4091 0x40a1
- 0x40e1 0x40b1 0x40c1>;
+ fsl,pinmux-ids = <
+ 0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */
+ 0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */
+ 0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */
+ 0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */
+ 0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */
+ 0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */
+ >;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
@@ -188,28 +350,61 @@
mmc0_8bit_pins_a: mmc0-8bit@0 {
reg = <0>;
- fsl,pinmux-ids = <0x2000 0x2010 0x2020
- 0x2030 0x2040 0x2050 0x2060
- 0x2070 0x2080 0x2090 0x20a0>;
+ fsl,pinmux-ids = <
+ 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
+ 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
+ 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
+ 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
+ 0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */
+ 0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */
+ 0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */
+ 0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */
+ 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
+ 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
+ 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ mmc0_4bit_pins_a: mmc0-4bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
+ 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
+ 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
+ 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
+ 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
+ 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
+ 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+ >;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
mmc0_cd_cfg: mmc0-cd-cfg {
- fsl,pinmux-ids = <0x2090>;
+ fsl,pinmux-ids = <
+ 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
+ >;
fsl,pull-up = <0>;
};
mmc0_sck_cfg: mmc0-sck-cfg {
- fsl,pinmux-ids = <0x20a0>;
+ fsl,pinmux-ids = <
+ 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+ >;
fsl,drive-strength = <2>;
fsl,pull-up = <0>;
};
i2c0_pins_a: i2c0@0 {
reg = <0>;
- fsl,pinmux-ids = <0x3180 0x3190>;
+ fsl,pinmux-ids = <
+ 0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */
+ 0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */
+ >;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
@@ -217,8 +412,12 @@
saif0_pins_a: saif0@0 {
reg = <0>;
- fsl,pinmux-ids =
- <0x3140 0x3150 0x3160 0x3170>;
+ fsl,pinmux-ids = <
+ 0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */
+ 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
+ 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
+ 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
+ >;
fsl,drive-strength = <2>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
@@ -226,101 +425,181 @@
saif1_pins_a: saif1@0 {
reg = <0>;
- fsl,pinmux-ids = <0x31a0>;
+ fsl,pinmux-ids = <
+ 0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */
+ >;
fsl,drive-strength = <2>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
+
+ pwm0_pins_a: pwm0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3100 /* MX28_PAD_PWM0__PWM_0 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ pwm2_pins_a: pwm2@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3120 /* MX28_PAD_PWM2__PWM_2 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ lcdif_24bit_pins_a: lcdif-24bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
+ 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
+ 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
+ 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
+ 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
+ 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
+ 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
+ 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
+ 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
+ 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
+ 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
+ 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
+ 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
+ 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
+ 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
+ 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+ 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
+ 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+ 0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
+ 0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
+ 0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
+ 0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
+ 0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
+ 0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ can0_pins_a: can0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */
+ 0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ can1_pins_a: can1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */
+ 0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
};
digctl@8001c000 {
- reg = <0x8001c000 2000>;
+ reg = <0x8001c000 0x2000>;
interrupts = <89>;
status = "disabled";
};
etm@80022000 {
- reg = <0x80022000 2000>;
+ reg = <0x80022000 0x2000>;
status = "disabled";
};
dma-apbx@80024000 {
compatible = "fsl,imx28-dma-apbx";
- reg = <0x80024000 2000>;
+ reg = <0x80024000 0x2000>;
};
dcp@80028000 {
- reg = <0x80028000 2000>;
+ reg = <0x80028000 0x2000>;
interrupts = <52 53 54>;
status = "disabled";
};
pxp@8002a000 {
- reg = <0x8002a000 2000>;
+ reg = <0x8002a000 0x2000>;
interrupts = <39>;
status = "disabled";
};
ocotp@8002c000 {
- reg = <0x8002c000 2000>;
+ reg = <0x8002c000 0x2000>;
status = "disabled";
};
axi-ahb@8002e000 {
- reg = <0x8002e000 2000>;
+ reg = <0x8002e000 0x2000>;
status = "disabled";
};
lcdif@80030000 {
- reg = <0x80030000 2000>;
+ compatible = "fsl,imx28-lcdif";
+ reg = <0x80030000 0x2000>;
interrupts = <38 86>;
status = "disabled";
};
can0: can@80032000 {
- reg = <0x80032000 2000>;
+ compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
+ reg = <0x80032000 0x2000>;
interrupts = <8>;
status = "disabled";
};
can1: can@80034000 {
- reg = <0x80034000 2000>;
+ compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
+ reg = <0x80034000 0x2000>;
interrupts = <9>;
status = "disabled";
};
simdbg@8003c000 {
- reg = <0x8003c000 200>;
+ reg = <0x8003c000 0x200>;
status = "disabled";
};
simgpmisel@8003c200 {
- reg = <0x8003c200 100>;
+ reg = <0x8003c200 0x100>;
status = "disabled";
};
simsspsel@8003c300 {
- reg = <0x8003c300 100>;
+ reg = <0x8003c300 0x100>;
status = "disabled";
};
simmemsel@8003c400 {
- reg = <0x8003c400 100>;
+ reg = <0x8003c400 0x100>;
status = "disabled";
};
gpiomon@8003c500 {
- reg = <0x8003c500 100>;
+ reg = <0x8003c500 0x100>;
status = "disabled";
};
simenet@8003c700 {
- reg = <0x8003c700 100>;
+ reg = <0x8003c700 0x100>;
status = "disabled";
};
armjtag@8003c800 {
- reg = <0x8003c800 100>;
+ reg = <0x8003c800 0x100>;
status = "disabled";
};
};
@@ -333,54 +612,55 @@
ranges;
clkctl@80040000 {
- reg = <0x80040000 2000>;
+ reg = <0x80040000 0x2000>;
status = "disabled";
};
saif0: saif@80042000 {
compatible = "fsl,imx28-saif";
- reg = <0x80042000 2000>;
+ reg = <0x80042000 0x2000>;
interrupts = <59 80>;
fsl,saif-dma-channel = <4>;
status = "disabled";
};
power@80044000 {
- reg = <0x80044000 2000>;
+ reg = <0x80044000 0x2000>;
status = "disabled";
};
saif1: saif@80046000 {
compatible = "fsl,imx28-saif";
- reg = <0x80046000 2000>;
+ reg = <0x80046000 0x2000>;
interrupts = <58 81>;
fsl,saif-dma-channel = <5>;
status = "disabled";
};
lradc@80050000 {
- reg = <0x80050000 2000>;
+ reg = <0x80050000 0x2000>;
status = "disabled";
};
spdif@80054000 {
- reg = <0x80054000 2000>;
+ reg = <0x80054000 0x2000>;
interrupts = <45 66>;
status = "disabled";
};
rtc@80056000 {
- reg = <0x80056000 2000>;
- interrupts = <28 29>;
- status = "disabled";
+ compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
+ reg = <0x80056000 0x2000>;
+ interrupts = <29>;
};
i2c0: i2c@80058000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
- reg = <0x80058000 2000>;
+ reg = <0x80058000 0x2000>;
interrupts = <111 68>;
+ clock-frequency = <100000>;
status = "disabled";
};
@@ -388,46 +668,55 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
- reg = <0x8005a000 2000>;
+ reg = <0x8005a000 0x2000>;
interrupts = <110 69>;
+ clock-frequency = <100000>;
status = "disabled";
};
- pwm@80064000 {
- reg = <0x80064000 2000>;
+ pwm: pwm@80064000 {
+ compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
+ reg = <0x80064000 0x2000>;
+ #pwm-cells = <2>;
+ fsl,pwm-number = <8>;
status = "disabled";
};
timrot@80068000 {
- reg = <0x80068000 2000>;
+ reg = <0x80068000 0x2000>;
status = "disabled";
};
auart0: serial@8006a000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006a000 0x2000>;
interrupts = <112 70 71>;
status = "disabled";
};
auart1: serial@8006c000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006c000 0x2000>;
interrupts = <113 72 73>;
status = "disabled";
};
auart2: serial@8006e000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006e000 0x2000>;
interrupts = <114 74 75>;
status = "disabled";
};
auart3: serial@80070000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x80070000 0x2000>;
interrupts = <115 76 77>;
status = "disabled";
};
auart4: serial@80072000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x80072000 0x2000>;
interrupts = <116 78 79>;
status = "disabled";
@@ -441,11 +730,13 @@
};
usbphy0: usbphy@8007c000 {
+ compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
reg = <0x8007c000 0x2000>;
status = "disabled";
};
usbphy1: usbphy@8007e000 {
+ compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
reg = <0x8007e000 0x2000>;
status = "disabled";
};
@@ -459,13 +750,19 @@
reg = <0x80080000 0x80000>;
ranges;
- usbctrl0: usbctrl@80080000 {
+ usb0: usb@80080000 {
+ compatible = "fsl,imx28-usb", "fsl,imx27-usb";
reg = <0x80080000 0x10000>;
+ interrupts = <93>;
+ fsl,usbphy = <&usbphy0>;
status = "disabled";
};
- usbctrl1: usbctrl@80090000 {
+ usb1: usb@80090000 {
+ compatible = "fsl,imx28-usb", "fsl,imx27-usb";
reg = <0x80090000 0x10000>;
+ interrupts = <92>;
+ fsl,usbphy = <&usbphy1>;
status = "disabled";
};
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 08:33:56 +0000