summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/omap3-cm-t3x30.dtsi')
-rw-r--r--arch/arm/boot/dts/omap3-cm-t3x30.dtsi74
1 files changed, 55 insertions, 19 deletions
diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
index 3a9f004d892..d00055809e3 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
@@ -1,28 +1,16 @@
/*
- * Common support for CompuLab CM-T3530 and CM-T3730
+ * Common support for CompuLab CM-T3x30 CoMs
*/
-/ {
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>; /* 256 MB */
- };
+#include "omap3-cm-t3x.dtsi"
+/ {
cpus {
cpu@0 {
cpu0-supply = <&vcc>;
};
};
- leds {
- compatible = "gpio-leds";
- ledb {
- label = "cm-t35:green";
- gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* gpio186 */
- linux,default-trigger = "heartbeat";
- };
- };
-
vddvario: regulator-vddvario {
compatible = "regulator-fixed";
regulator-name = "vddvario";
@@ -36,11 +24,40 @@
};
};
+&omap3_pmx_core {
+
+ smsc1_pins: pinmux_smsc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs5.gpmc_ncs5 */
+ OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
+ >;
+ };
+
+ hsusb0_pins: pinmux_hsusb0_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
+ OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
+ OMAP3_CORE1_IOPAD(0x21a4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
+ OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
+ OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */
+ OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
+ OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
+ OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data3 */
+ OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data4 */
+ OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data5 */
+ OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data6 */
+ OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
+ >;
+ };
+};
+
&gpmc {
ranges = <5 0 0x2c000000 0x01000000>;
smsc1: ethernet@5,0 {
compatible = "smsc,lan9221", "smsc,lan9115";
+ pinctrl-names = "default";
+ pinctrl-0 = <&smsc1_pins>;
interrupt-parent = <&gpio6>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
reg = <5 0 0xff>;
@@ -74,8 +91,6 @@
};
&i2c1 {
- clock-frequency = <400000>;
-
twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
@@ -86,10 +101,31 @@
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
-&i2c3 {
- clock-frequency = <400000>;
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
};
&twl_gpio {
ti,use-leds;
+ /* pullups: BIT(0) */
+ ti,pullups = <0x000001>;
+};
+
+&hsusb1_phy {
+ reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>;
+};
+
+&hsusb2_phy {
+ reset-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
+};
+
+&usb_otg_hs {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb0_pins>;
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
};