diff options
Diffstat (limited to 'arch/arm/boot/dts/omap3-gta04.dts')
| -rw-r--r-- | arch/arm/boot/dts/omap3-gta04.dts | 170 |
1 files changed, 170 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts new file mode 100644 index 00000000000..b9b55c95a56 --- /dev/null +++ b/arch/arm/boot/dts/omap3-gta04.dts @@ -0,0 +1,170 @@ +/* + * Copyright (C) 2013 Marek Belisko <marek@goldelico.com> + * + * Based on omap3-beagle-xm.dts + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap36xx.dtsi" + +/ { + model = "OMAP3 GTA04"; + compatible = "ti,omap3-gta04", "ti,omap3"; + + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + gpio-keys { + compatible = "gpio-keys"; + + aux-button { + label = "aux"; + linux,code = <169>; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + }; + }; +}; + +&omap3_pmx_core { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ + 0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + >; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&i2c2 { + clock-frequency = <400000>; + + /* pressure sensor */ + bmp085@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + }; + + /* leds */ + tca6507@45 { + compatible = "ti,tca6507"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x45>; + + gta04_led0: red_aux@0 { + label = "gta04:red:aux"; + reg = <0x0>; + }; + + gta04_led1: green_aux@1 { + label = "gta04:green:aux"; + reg = <0x1>; + }; + + gta04_led3: red_power@3 { + label = "gta04:red:power"; + reg = <0x3>; + linux,default-trigger = "default-on"; + }; + + gta04_led4: green_power@4 { + label = "gta04:green:power"; + reg = <0x4>; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <4>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + |