diff options
Diffstat (limited to 'arch/arm/boot/dts/omap4-panda.dts')
| -rw-r--r-- | arch/arm/boot/dts/omap4-panda.dts | 201 |
1 files changed, 2 insertions, 199 deletions
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 4122efe31cf..f8b221f0168 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -7,202 +7,5 @@ */ /dts-v1/; -/include/ "omap4.dtsi" -/include/ "elpida_ecb240abacn.dtsi" - -/ { - model = "TI OMAP4 PandaBoard"; - compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GB */ - }; - - leds { - compatible = "gpio-leds"; - heartbeat { - label = "pandaboard::status1"; - gpios = <&gpio1 7 0>; - linux,default-trigger = "heartbeat"; - }; - - mmc { - label = "pandaboard::status2"; - gpios = <&gpio1 8 0>; - linux,default-trigger = "mmc0"; - }; - }; - - sound: sound { - compatible = "ti,abe-twl6040"; - ti,model = "PandaBoard"; - - ti,mclk-freq = <38400000>; - - ti,mcpdm = <&mcpdm>; - - ti,twl6040 = <&twl6040>; - - /* Audio routing */ - ti,audio-routing = - "Headset Stereophone", "HSOL", - "Headset Stereophone", "HSOR", - "Ext Spk", "HFL", - "Ext Spk", "HFR", - "Line Out", "AUXL", - "Line Out", "AUXR", - "HSMIC", "Headset Mic", - "Headset Mic", "Headset Mic Bias", - "AFML", "Line In", - "AFMR", "Line In"; - }; -}; - -&omap4_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = < - &twl6040_pins - &mcpdm_pins - &mcbsp1_pins - &dss_hdmi_pins - &tpd12s015_pins - >; - - twl6040_pins: pinmux_twl6040_pins { - pinctrl-single,pins = < - 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ - 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */ - >; - }; - - mcpdm_pins: pinmux_mcpdm_pins { - pinctrl-single,pins = < - 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */ - 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */ - 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */ - 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */ - 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ - >; - }; - - mcbsp1_pins: pinmux_mcbsp1_pins { - pinctrl-single,pins = < - 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */ - 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */ - 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */ - 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ - >; - }; - - dss_hdmi_pins: pinmux_dss_hdmi_pins { - pinctrl-single,pins = < - 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ - 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ - 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ - >; - }; - - tpd12s015_pins: pinmux_tpd12s015_pins { - pinctrl-single,pins = < - 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ - 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ - 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ - >; - }; -}; - -&i2c1 { - clock-frequency = <400000>; - - twl: twl@48 { - reg = <0x48>; - /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ - interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-parent = <&gic>; - }; - - twl6040: twl@4b { - compatible = "ti,twl6040"; - reg = <0x4b>; - /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ - interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ - interrupt-parent = <&gic>; - ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ - - vio-supply = <&v1v8>; - v2v1-supply = <&v2v1>; - enable-active-high; - }; -}; - -/include/ "twl6030.dtsi" - -&i2c2 { - clock-frequency = <400000>; -}; - -&i2c3 { - clock-frequency = <100000>; - - /* - * Display monitor features are burnt in their EEPROM as EDID data. - * The EEPROM is connected as I2C slave device. - */ - eeprom@50 { - compatible = "ti,eeprom"; - reg = <0x50>; - }; -}; - -&i2c4 { - clock-frequency = <400000>; -}; - -&mmc1 { - vmmc-supply = <&vmmc>; - bus-width = <8>; -}; - -&mmc2 { - status = "disabled"; -}; - -&mmc3 { - status = "disabled"; -}; - -&mmc4 { - status = "disabled"; -}; - -&mmc5 { - ti,non-removable; - bus-width = <4>; -}; - -&emif1 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&emif2 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&mcbsp2 { - status = "disabled"; -}; - -&mcbsp3 { - status = "disabled"; -}; - -&dmic { - status = "disabled"; -}; - -&twl_usb_comparator { - usb-supply = <&vusb>; -}; +/include/ "omap443x.dtsi" +/include/ "omap4-panda-common.dtsi" |