diff options
Diffstat (limited to 'arch/arm/boot/dts/zynq-7000.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/zynq-7000.dtsi | 107 |
1 files changed, 72 insertions, 35 deletions
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 789d0bacc11..760bbc463c5 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -1,5 +1,5 @@ /* - * Copyright (C) 2011 Xilinx + * Copyright (C) 2011 - 2014 Xilinx * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -24,6 +24,8 @@ device_type = "cpu"; reg = <0>; clocks = <&clkc 3>; + clock-latency = <1000>; + cpu0-supply = <®ulator_vccpint>; operating-points = < /* kHz uV */ 666667 1000000 @@ -47,6 +49,15 @@ reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >; }; + regulator_vccpint: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VCCPINT"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + amba { compatible = "simple-bus"; #address-cells = <1>; @@ -54,10 +65,31 @@ interrupt-parent = <&intc>; ranges; + i2c0: i2c@e0004000 { + compatible = "cdns,i2c-r1p10"; + status = "disabled"; + clocks = <&clkc 38>; + interrupt-parent = <&intc>; + interrupts = <0 25 4>; + reg = <0xe0004000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@e0005000 { + compatible = "cdns,i2c-r1p10"; + status = "disabled"; + clocks = <&clkc 39>; + interrupt-parent = <&intc>; + interrupts = <0 48 4>; + reg = <0xe0005000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + }; + intc: interrupt-controller@f8f01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; interrupt-controller; reg = <0xF8F01000 0x1000>, <0xF8F00100 0x100>; @@ -72,7 +104,7 @@ cache-level = <2>; }; - uart0: uart@e0000000 { + uart0: serial@e0000000 { compatible = "xlnx,xuartps"; status = "disabled"; clocks = <&clkc 23>, <&clkc 40>; @@ -81,7 +113,7 @@ interrupts = <0 27 4>; }; - uart1: uart@e0001000 { + uart1: serial@e0001000 { compatible = "xlnx,xuartps"; status = "disabled"; clocks = <&clkc 24>, <&clkc 41>; @@ -108,7 +140,7 @@ clock-names = "pclk", "hclk", "tx_clk"; }; - sdhci0: ps7-sdhci@e0100000 { + sdhci0: sdhci@e0100000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; clock-names = "clk_xin", "clk_ahb"; @@ -118,7 +150,7 @@ reg = <0xe0100000 0x1000>; } ; - sdhci1: ps7-sdhci@e0101000 { + sdhci1: sdhci@e0101000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; clock-names = "clk_xin", "clk_ahb"; @@ -129,32 +161,36 @@ } ; slcr: slcr@f8000000 { - compatible = "xlnx,zynq-slcr"; + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,zynq-slcr", "syscon"; reg = <0xF8000000 0x1000>; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - clkc: clkc { - #clock-cells = <1>; - compatible = "xlnx,ps7-clkc"; - ps-clk-frequency = <33333333>; - clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", - "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", - "dci", "lqspi", "smc", "pcap", "gem0", "gem1", - "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1", - "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", - "dma", "usb0_aper", "usb1_aper", "gem0_aper", - "gem1_aper", "sdio0_aper", "sdio1_aper", - "spi0_aper", "spi1_aper", "can0_aper", "can1_aper", - "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper", - "gpio_aper", "lqspi_aper", "smc_aper", "swdt", - "dbg_trc", "dbg_apb"; - }; + ranges; + clkc: clkc@100 { + #clock-cells = <1>; + compatible = "xlnx,ps7-clkc"; + ps-clk-frequency = <33333333>; + fclk-enable = <0>; + clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", + "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", + "dci", "lqspi", "smc", "pcap", "gem0", "gem1", + "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1", + "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", + "dma", "usb0_aper", "usb1_aper", "gem0_aper", + "gem1_aper", "sdio0_aper", "sdio1_aper", + "spi0_aper", "spi1_aper", "can0_aper", "can1_aper", + "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper", + "gpio_aper", "lqspi_aper", "smc_aper", "swdt", + "dbg_trc", "dbg_apb"; + reg = <0x100 0x100>; }; }; + devcfg: devcfg@f8007000 { + compatible = "xlnx,zynq-devcfg-1.0"; + reg = <0xf8007000 0x100>; + } ; + global_timer: timer@f8f00200 { compatible = "arm,cortex-a9-global-timer"; reg = <0xf8f00200 0x20>; @@ -163,26 +199,27 @@ clocks = <&clkc 4>; }; - ttc0: ttc0@f8001000 { + ttc0: timer@f8001000 { interrupt-parent = <&intc>; - interrupts = < 0 10 4 0 11 4 0 12 4 >; + interrupts = <0 10 4>, <0 11 4>, <0 12 4>; compatible = "cdns,ttc"; clocks = <&clkc 6>; reg = <0xF8001000 0x1000>; }; - ttc1: ttc1@f8002000 { + ttc1: timer@f8002000 { interrupt-parent = <&intc>; - interrupts = < 0 37 4 0 38 4 0 39 4 >; + interrupts = <0 37 4>, <0 38 4>, <0 39 4>; compatible = "cdns,ttc"; clocks = <&clkc 6>; reg = <0xF8002000 0x1000>; }; - scutimer: scutimer@f8f00600 { + + scutimer: timer@f8f00600 { interrupt-parent = <&intc>; - interrupts = < 1 13 0x301 >; + interrupts = <1 13 0x301>; compatible = "arm,cortex-a9-twd-timer"; - reg = < 0xf8f00600 0x20 >; + reg = <0xf8f00600 0x20>; clocks = <&clkc 4>; } ; }; |