diff options
Diffstat (limited to 'arch/arm/boot/dts')
40 files changed, 165 insertions, 173 deletions
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index cb6811e5ae5..7ad75b4e066 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -144,7 +144,7 @@ compatible = "ti,edma3"; ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; reg = <0x49000000 0x10000>, - <0x44e10f90 0x10>; + <0x44e10f90 0x40>; interrupts = <12 13 14>; #dma-cells = <1>; dma-channels = <64>; diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index 788391f9168..5a452fdd7c5 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -62,5 +62,21 @@ }; }; +&iva { + status = "disabled"; +}; + +&mailbox { + status = "disabled"; +}; + +&mmu_isp { + status = "disabled"; +}; + +&smartreflex_mpu_iva { + status = "disabled"; +}; + /include/ "am35xx-clocks.dtsi" /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index df8798e8bd2..a055f7f0f14 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -117,6 +117,11 @@ status = "okay"; }; +&gpio5 { + status = "okay"; + ti,no-reset-on-init; +}; + &mmc1 { status = "okay"; vmmc-supply = <&vmmcsd_fixed>; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 82f238a9063..3383c4b6680 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -67,6 +67,7 @@ i2c@11000 { pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; + clock-frequency = <100000>; status = "okay"; audio_codec: audio-codec@4a { compatible = "cirrus,cs42l51"; diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 9378d3136b4..0451124e8eb 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -79,6 +79,11 @@ }; }; + sata@a0000 { + status = "okay"; + nr-ports = <2>; + }; + nand: nand@d0000 { pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index 068031f0f26..6d0f03c98ee 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -99,7 +99,7 @@ pcie@3,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; + reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index e2919f02e1d..da801964a25 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -110,7 +110,7 @@ pcie@3,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; + reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; @@ -131,7 +131,7 @@ pcie@4,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; - reg = <0x1000 0 0 0 0>; + reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 448373c4b0e..90f0bf6f927 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -49,7 +49,7 @@ /* Device Bus parameters are required */ /* Read parameters */ - devbus,bus-width = <8>; + devbus,bus-width = <16>; devbus,turn-off-ps = <60000>; devbus,badr-skew-ps = <0>; devbus,acc-first-ps = <124000>; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 61bda687f78..0c756421ae6 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -59,7 +59,7 @@ /* Device Bus parameters are required */ /* Read parameters */ - devbus,bus-width = <8>; + devbus,bus-width = <16>; devbus,turn-off-ps = <60000>; devbus,badr-skew-ps = <0>; devbus,acc-first-ps = <124000>; @@ -146,22 +146,22 @@ ethernet@70000 { status = "okay"; phy = <&phy0>; - phy-mode = "rgmii-id"; + phy-mode = "qsgmii"; }; ethernet@74000 { status = "okay"; phy = <&phy1>; - phy-mode = "rgmii-id"; + phy-mode = "qsgmii"; }; ethernet@30000 { status = "okay"; phy = <&phy2>; - phy-mode = "rgmii-id"; + phy-mode = "qsgmii"; }; ethernet@34000 { status = "okay"; phy = <&phy3>; - phy-mode = "rgmii-id"; + phy-mode = "qsgmii"; }; /* Front-side USB slot */ diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 985948ce67b..5d42feb3104 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -39,7 +39,7 @@ /* Device Bus parameters are required */ /* Read parameters */ - devbus,bus-width = <8>; + devbus,bus-width = <16>; devbus,turn-off-ps = <60000>; devbus,badr-skew-ps = <0>; devbus,acc-first-ps = <124000>; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index ce1375595e5..4537259ce52 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -34,7 +34,7 @@ }; spi0: spi@f0004000 { - cs-gpios = <&pioD 13 0>; + cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>; status = "okay"; }; @@ -79,7 +79,7 @@ }; spi1: spi@f8008000 { - cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>; + cs-gpios = <&pioC 25 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 366fc2cbcd6..c0e0eae16a2 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -641,7 +641,7 @@ trigger@3 { reg = <3>; trigger-name = "external"; - trigger-value = <0x13>; + trigger-value = <0xd>; trigger-external; }; }; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index e21dda0e898..3be973e9889 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -10,7 +10,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { model = "Atmel AT91SAM9261 family SoC"; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 63e1784d272..92a52faebef 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -8,7 +8,7 @@ #include "skeleton.dtsi" #include <dt-bindings/pinctrl/at91.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 9583563dd0e..8a558b7ac99 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -503,7 +503,7 @@ status = "okay"; ak8975@0c { - compatible = "ak,ak8975"; + compatible = "asahi-kasei,ak8975"; reg = <0x0c>; gpios = <&gpj0 7 0>; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 090f9830b12..cde19c81866 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -107,6 +107,7 @@ regulator-name = "VDD_IOPERI_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; op_mode = <1>; }; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 80a3bf4c598..896a2a6619e 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -364,16 +364,4 @@ gpio-key,wakeup; }; }; - - amba { - mdma1: mdma@11C10000 { - /* - * MDMA1 can support both secure and non-secure - * AXI transactions. When this is enabled in the kernel - * for boards that run in secure mode, we are getting - * imprecise external aborts causing the kernel to oops. - */ - status = "disabled"; - }; - }; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index c3a9a66c576..b69fbcb7dcb 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -219,16 +219,6 @@ reg = <0x100440C0 0x20>; }; - mau_pd: power-domain@100440E0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x100440E0 0x20>; - }; - - g2d_pd: power-domain@10044100 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10044100 0x20>; - }; - msc_pd: power-domain@10044120 { compatible = "samsung,exynos4210-pd"; reg = <0x10044120 0x20>; @@ -336,6 +326,13 @@ #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <1>; + /* + * MDMA1 can support both secure and non-secure + * AXI transactions. When this is enabled in the kernel + * for boards that run in secure mode, we are getting + * imprecise external aborts causing the kernel to oops. + */ + status = "disabled"; }; }; @@ -385,7 +382,7 @@ spi_0: spi@12d20000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d20000 0x100>; - interrupts = <0 66 0>; + interrupts = <0 68 0>; dmas = <&pdma0 5 &pdma0 4>; dma-names = "tx", "rx"; @@ -401,7 +398,7 @@ spi_1: spi@12d30000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d30000 0x100>; - interrupts = <0 67 0>; + interrupts = <0 69 0>; dmas = <&pdma1 5 &pdma1 4>; dma-names = "tx", "rx"; @@ -417,7 +414,7 @@ spi_2: spi@12d40000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d40000 0x100>; - interrupts = <0 68 0>; + interrupts = <0 70 0>; dmas = <&pdma0 7 &pdma0 6>; dma-names = "tx", "rx"; @@ -730,6 +727,5 @@ interrupts = <0 112 0>; clocks = <&clock 471>; clock-names = "secss"; - samsung,power-domain = <&g2d_pd>; }; }; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index 7c8c1296989..a3431d78487 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -244,7 +244,7 @@ &tve { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_vga_sync_1>; - i2c-ddc-bus = <&i2c3>; + ddc-i2c-bus = <&i2c3>; fsl,tve-mode = "vga"; fsl,hsync-pin = <4>; fsl,vsync-pin = <6>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 9c2bff2252d..6a1bf4ff83d 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -115,7 +115,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-ipu"; - reg = <0x18000000 0x080000000>; + reg = <0x18000000 0x08000000>; interrupts = <11 10>; clocks = <&clks IMX5_CLK_IPU_GATE>, <&clks IMX5_CLK_IPU_DI0_GATE>, diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index 32c6fb4a116..b939f4f52d1 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -30,6 +30,16 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl@10000 { pmx_usb_led: pmx-usb-led { @@ -73,14 +83,6 @@ ehci@50000 { status = "okay"; }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi index aa78c2d11fe..e2cc85cc3b8 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi @@ -4,6 +4,16 @@ / { model = "ZyXEL NSA310"; + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { @@ -26,14 +36,6 @@ status = "okay"; nr-ports = <2>; }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio_poweroff { diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts index 7d1c7677a18..0bd70d928c6 100644 --- a/arch/arm/boot/dts/kirkwood-t5325.dts +++ b/arch/arm/boot/dts/kirkwood-t5325.dts @@ -127,11 +127,6 @@ i2c@11000 { status = "okay"; - - alc5621: alc5621@1a { - compatible = "realtek,alc5621"; - reg = <0x1a>; - }; }; serial@12000 { diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi index f577b7df9a2..521c587acae 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi @@ -24,11 +24,10 @@ compatible = "smsc,lan9221", "smsc,lan9115"; bank-width = <2>; gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; + gpmc,cs-on-ns = <1>; + gpmc,cs-rd-off-ns = <180>; + gpmc,cs-wr-off-ns = <180>; + gpmc,adv-rd-off-ns = <18>; gpmc,adv-wr-off-ns = <48>; gpmc,oe-on-ns = <54>; gpmc,oe-off-ns = <168>; @@ -36,12 +35,10 @@ gpmc,we-off-ns = <168>; gpmc,rd-cycle-ns = <186>; gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; + gpmc,access-ns = <144>; + gpmc,page-burst-access-ns = <24>; + gpmc,bus-turnaround-ns = <90>; + gpmc,cycle2cycle-delay-ns = <90>; gpmc,cycle2cycle-samecsen; gpmc,cycle2cycle-diffcsen; vddvario-supply = <&vddvario>; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 22f35ea142c..8f8c07da4ac 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -71,13 +71,6 @@ interrupts = <58>; }; - mailbox: mailbox@48094000 { - compatible = "ti,omap2-mailbox"; - ti,hwmods = "mailbox"; - reg = <0x48094000 0x200>; - interrupts = <26>; - }; - intc: interrupt-controller@1 { compatible = "ti,omap2-intc"; interrupt-controller; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index 85b1fb014c4..2d9979835f2 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -125,6 +125,14 @@ dma-names = "tx", "rx"; }; + mailbox: mailbox@48094000 { + compatible = "ti,omap2-mailbox"; + reg = <0x48094000 0x200>; + interrupts = <26>, <34>; + interrupt-names = "dsp", "iva"; + ti,hwmods = "mailbox"; + }; + timer1: timer@48028000 { compatible = "ti,omap2420-timer"; reg = <0x48028000 0x400>; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index d09697dab55..42d2c61c9e2 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -216,6 +216,13 @@ dma-names = "tx", "rx"; }; + mailbox: mailbox@48094000 { + compatible = "ti,omap2-mailbox"; + reg = <0x48094000 0x200>; + interrupts = <26>; + ti,hwmods = "mailbox"; + }; + timer1: timer@49018000 { compatible = "ti,omap2420-timer"; reg = <0x49018000 0x400>; diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi index d00055809e3..25ba08331d8 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi @@ -10,18 +10,6 @@ cpu0-supply = <&vcc>; }; }; - - vddvario: regulator-vddvario { - compatible = "regulator-fixed"; - regulator-name = "vddvario"; - regulator-always-on; - }; - - vdd33a: regulator-vdd33a { - compatible = "regulator-fixed"; - regulator-name = "vdd33a"; - regulator-always-on; - }; }; &omap3_pmx_core { @@ -35,58 +23,34 @@ hsusb0_pins: pinmux_hsusb0_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ - OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ - OMAP3_CORE1_IOPAD(0x21a4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ - OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ - OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */ - OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ - OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ - OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data3 */ - OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data4 */ - OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data5 */ - OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data6 */ - OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ + OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ + OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ + OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ + OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ + OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */ + OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ + OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ + OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data3 */ + OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data4 */ + OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data5 */ + OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data6 */ + OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ >; }; }; +#include "omap-gpmc-smsc911x.dtsi" + &gpmc { ranges = <5 0 0x2c000000 0x01000000>; - smsc1: ethernet@5,0 { + smsc1: ethernet@gpmc { compatible = "smsc,lan9221", "smsc,lan9115"; pinctrl-names = "default"; pinctrl-0 = <&smsc1_pins>; interrupt-parent = <&gpio6>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; reg = <5 0 0xff>; - bank-width = <2>; - gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; - gpmc,adv-wr-off-ns = <48>; - gpmc,oe-on-ns = <54>; - gpmc,oe-off-ns = <168>; - gpmc,we-on-ns = <54>; - gpmc,we-off-ns = <168>; - gpmc,rd-cycle-ns = <186>; - gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; - gpmc,cycle2cycle-samecsen; - gpmc,cycle2cycle-diffcsen; - vddvario-supply = <&vddvario>; - vdd33a-supply = <&vdd33a>; - reg-io-width = <4>; - smsc,save-mac-address; }; }; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index b97736d98a6..e2d163bf061 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -107,7 +107,7 @@ >; }; - smsc911x_pins: pinmux_smsc911x_pins { + smsc9221_pins: pinmux_smsc9221_pins { pinctrl-single,pins = < 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ >; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 7abd64f6ae2..b22caaaf774 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -10,7 +10,7 @@ */ #include "omap3-igep.dtsi" -#include "omap-gpmc-smsc911x.dtsi" +#include "omap-gpmc-smsc9221.dtsi" / { model = "IGEPv2 (TI OMAP AM/DM37x)"; @@ -248,7 +248,7 @@ ethernet@gpmc { pinctrl-names = "default"; - pinctrl-0 = <&smsc911x_pins>; + pinctrl-0 = <&smsc9221_pins>; reg = <5 0 0xff>; interrupt-parent = <&gpio6>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi index 7909c51b05a..d59e3de1441 100644 --- a/arch/arm/boot/dts/omap3-sb-t35.dtsi +++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi @@ -2,20 +2,6 @@ * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730 */ -/ { - vddvario_sb_t35: regulator-vddvario-sb-t35 { - compatible = "regulator-fixed"; - regulator-name = "vddvario"; - regulator-always-on; - }; - - vdd33a_sb_t35: regulator-vdd33a-sb-t35 { - compatible = "regulator-fixed"; - regulator-name = "vdd33a"; - regulator-always-on; - }; -}; - &omap3_pmx_core { smsc2_pins: pinmux_smsc2_pins { pinctrl-single,pins = < @@ -37,11 +23,10 @@ reg = <4 0 0xff>; bank-width = <2>; gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; + gpmc,cs-on-ns = <1>; + gpmc,cs-rd-off-ns = <180>; + gpmc,cs-wr-off-ns = <180>; + gpmc,adv-rd-off-ns = <18>; gpmc,adv-wr-off-ns = <48>; gpmc,oe-on-ns = <54>; gpmc,oe-off-ns = <168>; @@ -49,16 +34,14 @@ gpmc,we-off-ns = <168>; gpmc,rd-cycle-ns = <186>; gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; + gpmc,access-ns = <144>; + gpmc,page-burst-access-ns = <24>; + gpmc,bus-turnaround-ns = <90>; + gpmc,cycle2cycle-delay-ns = <90>; gpmc,cycle2cycle-samecsen; gpmc,cycle2cycle-diffcsen; - vddvario-supply = <&vddvario_sb_t35>; - vdd33a-supply = <&vdd33a_sb_t35>; + vddvario-supply = <&vddvario>; + vdd33a-supply = <&vdd33a>; reg-io-width = <4>; smsc,save-mac-address; }; diff --git a/arch/arm/boot/dts/omap3-sbc-t3517.dts b/arch/arm/boot/dts/omap3-sbc-t3517.dts index 024c9c6c682..42189b65d39 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3517.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3517.dts @@ -8,6 +8,19 @@ / { model = "CompuLab SBC-T3517 with CM-T3517"; compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3"; + + /* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */ + vddvario: regulator-vddvario-sb-t35 { + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; + }; + + vdd33a: regulator-vdd33a-sb-t35 { + compatible = "regulator-fixed"; + regulator-name = "vdd33a"; + regulator-always-on; + }; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index acb9019dc43..4231191ade0 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -61,7 +61,7 @@ ti,hwmods = "mpu"; }; - iva { + iva: iva { compatible = "ti,iva2.2"; ti,hwmods = "iva"; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index f8c9855ce58..36b4312a5e0 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -630,6 +630,13 @@ status = "disabled"; }; + mailbox: mailbox@4a0f4000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4a0f4000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox"; + }; + timer1: timer@4ae18000 { compatible = "ti,omap5430-timer"; reg = <0x4ae18000 0x80>; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index eabcfdbb403..a106b087291 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -13,7 +13,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { model = "Atmel SAMA5D3 family SoC"; diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi index b029fe7ef17..1b02208ea6f 100644 --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi @@ -9,7 +9,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { ahb { diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi index 382b04431f6..02848453ca0 100644 --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi @@ -9,7 +9,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { aliases { diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index a9fa75e4165..7a8d4c6115f 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -9,7 +9,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { aliases { diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts index 7f3baf51a3a..32dd55e5f4e 100644 --- a/arch/arm/boot/dts/ste-ccu8540.dts +++ b/arch/arm/boot/dts/ste-ccu8540.dts @@ -18,6 +18,7 @@ compatible = "st-ericsson,ccu8540", "st-ericsson,u8540"; memory@0 { + device_type = "memory"; reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 32efc105df8..aba1c8a3f38 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -87,7 +87,7 @@ pll4: clk@01c20018 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; + compatible = "allwinner,sun7i-a20-pll4-clk"; reg = <0x01c20018 0x4>; clocks = <&osc24M>; clock-output-names = "pll4"; @@ -109,6 +109,14 @@ clock-output-names = "pll6_sata", "pll6_other", "pll6"; }; + pll8: clk@01c20040 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-pll4-clk"; + reg = <0x01c20040 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll8"; + }; + cpu: cpu@01c20054 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-cpu-clk"; @@ -805,9 +813,9 @@ status = "disabled"; }; - i2c4: i2c@01c2bc00 { + i2c4: i2c@01c2c000 { compatible = "allwinner,sun4i-i2c"; - reg = <0x01c2bc00 0x400>; + reg = <0x01c2c000 0x400>; interrupts = <0 89 4>; clocks = <&apb1_gates 15>; clock-frequency = <100000>; |