diff options
Diffstat (limited to 'arch/arm/boot')
-rw-r--r-- | arch/arm/boot/dts/db8500.dtsi | 204 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx27.dtsi | 9 | ||||
-rw-r--r-- | arch/arm/boot/dts/snowball.dts | 32 |
3 files changed, 233 insertions, 12 deletions
diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi index 881bc398784..4ad5160018c 100644 --- a/arch/arm/boot/dts/db8500.dtsi +++ b/arch/arm/boot/dts/db8500.dtsi @@ -58,6 +58,8 @@ "st,nomadik-gpio"; reg = <0x8012e000 0x80>; interrupts = <0 119 0x4>; + interrupt-controller; + #interrupt-cells = <2>; supports-sleepmode; gpio-controller; #gpio-cells = <2>; @@ -69,6 +71,8 @@ "st,nomadik-gpio"; reg = <0x8012e080 0x80>; interrupts = <0 120 0x4>; + interrupt-controller; + #interrupt-cells = <2>; supports-sleepmode; gpio-controller; #gpio-cells = <2>; @@ -80,6 +84,8 @@ "st,nomadik-gpio"; reg = <0x8000e000 0x80>; interrupts = <0 121 0x4>; + interrupt-controller; + #interrupt-cells = <2>; supports-sleepmode; gpio-controller; #gpio-cells = <2>; @@ -91,6 +97,8 @@ "st,nomadik-gpio"; reg = <0x8000e080 0x80>; interrupts = <0 122 0x4>; + interrupt-controller; + #interrupt-cells = <2>; supports-sleepmode; gpio-controller; #gpio-cells = <2>; @@ -102,6 +110,8 @@ "st,nomadik-gpio"; reg = <0x8000e100 0x80>; interrupts = <0 123 0x4>; + interrupt-controller; + #interrupt-cells = <2>; supports-sleepmode; gpio-controller; #gpio-cells = <2>; @@ -113,6 +123,8 @@ "st,nomadik-gpio"; reg = <0x8000e180 0x80>; interrupts = <0 124 0x4>; + interrupt-controller; + #interrupt-cells = <2>; supports-sleepmode; gpio-controller; #gpio-cells = <2>; @@ -124,6 +136,8 @@ "st,nomadik-gpio"; reg = <0x8011e000 0x80>; interrupts = <0 125 0x4>; + interrupt-controller; + #interrupt-cells = <2>; supports-sleepmode; gpio-controller; #gpio-cells = <2>; @@ -135,6 +149,8 @@ "st,nomadik-gpio"; reg = <0x8011e080 0x80>; interrupts = <0 126 0x4>; + interrupt-controller; + #interrupt-cells = <2>; supports-sleepmode; gpio-controller; #gpio-cells = <2>; @@ -146,12 +162,18 @@ "st,nomadik-gpio"; reg = <0xa03fe000 0x80>; interrupts = <0 127 0x4>; + interrupt-controller; + #interrupt-cells = <2>; supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <8>; }; + pinctrl { + compatible = "stericsson,nmk_pinctrl"; + }; + usb@a03e0000 { compatible = "stericsson,db8500-musb", "mentor,musb"; @@ -169,20 +191,195 @@ prcmu@80157000 { compatible = "stericsson,db8500-prcmu"; reg = <0x80157000 0x1000>; - interrupts = <46 47>; + interrupts = <0 47 0x4>; #address-cells = <1>; #size-cells = <1>; ranges; - prcmu-timer-4@80157450 { + prcmu-timer-4@80157450 { compatible = "stericsson,db8500-prcmu-timer-4"; reg = <0x80157450 0xC>; }; + db8500-prcmu-regulators { + compatible = "stericsson,db8500-prcmu-regulator"; + + // DB8500_REGULATOR_VAPE + db8500_vape_reg: db8500_vape { + regulator-name = "db8500-vape"; + regulator-always-on; + }; + + // DB8500_REGULATOR_VARM + db8500_varm_reg: db8500_varm { + regulator-name = "db8500-varm"; + }; + + // DB8500_REGULATOR_VMODEM + db8500_vmodem_reg: db8500_vmodem { + regulator-name = "db8500-vmodem"; + }; + + // DB8500_REGULATOR_VPLL + db8500_vpll_reg: db8500_vpll { + regulator-name = "db8500-vpll"; + }; + + // DB8500_REGULATOR_VSMPS1 + db8500_vsmps1_reg: db8500_vsmps1 { + regulator-name = "db8500-vsmps1"; + }; + + // DB8500_REGULATOR_VSMPS2 + db8500_vsmps2_reg: db8500_vsmps2 { + regulator-name = "db8500-vsmps2"; + }; + + // DB8500_REGULATOR_VSMPS3 + db8500_vsmps3_reg: db8500_vsmps3 { + regulator-name = "db8500-vsmps3"; + }; + + // DB8500_REGULATOR_VRF1 + db8500_vrf1_reg: db8500_vrf1 { + regulator-name = "db8500-vrf1"; + }; + + // DB8500_REGULATOR_SWITCH_SVAMMDSP + db8500_sva_mmdsp_reg: db8500_sva_mmdsp { + regulator-name = "db8500-sva-mmdsp"; + }; + + // DB8500_REGULATOR_SWITCH_SVAMMDSPRET + db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { + regulator-name = "db8500-sva-mmdsp-ret"; + }; + + // DB8500_REGULATOR_SWITCH_SVAPIPE + db8500_sva_pipe_reg: db8500_sva_pipe { + regulator-name = "db8500_sva_pipe"; + }; + + // DB8500_REGULATOR_SWITCH_SIAMMDSP + db8500_sia_mmdsp_reg: db8500_sia_mmdsp { + regulator-name = "db8500_sia_mmdsp"; + }; + + // DB8500_REGULATOR_SWITCH_SIAMMDSPRET + db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { + regulator-name = "db8500-sia-mmdsp-ret"; + }; + + // DB8500_REGULATOR_SWITCH_SIAPIPE + db8500_sia_pipe_reg: db8500_sia_pipe { + regulator-name = "db8500-sia-pipe"; + }; + + // DB8500_REGULATOR_SWITCH_SGA + db8500_sga_reg: db8500_sga { + regulator-name = "db8500-sga"; + vin-supply = <&db8500_vape_reg>; + }; + + // DB8500_REGULATOR_SWITCH_B2R2_MCDE + db8500_b2r2_mcde_reg: db8500_b2r2_mcde { + regulator-name = "db8500-b2r2-mcde"; + vin-supply = <&db8500_vape_reg>; + }; + + // DB8500_REGULATOR_SWITCH_ESRAM12 + db8500_esram12_reg: db8500_esram12 { + regulator-name = "db8500-esram12"; + }; + + // DB8500_REGULATOR_SWITCH_ESRAM12RET + db8500_esram12_ret_reg: db8500_esram12_ret { + regulator-name = "db8500-esram12-ret"; + }; + + // DB8500_REGULATOR_SWITCH_ESRAM34 + db8500_esram34_reg: db8500_esram34 { + regulator-name = "db8500-esram34"; + }; + + // DB8500_REGULATOR_SWITCH_ESRAM34RET + db8500_esram34_ret_reg: db8500_esram34_ret { + regulator-name = "db8500-esram34-ret"; + }; + }; + ab8500@5 { compatible = "stericsson,ab8500"; reg = <5>; /* mailbox 5 is i2c */ interrupts = <0 40 0x4>; + + ab8500-regulators { + compatible = "stericsson,ab8500-regulator"; + + // supplies to the display/camera + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-name = "V-DISPLAY"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2900000>; + regulator-boot-on; + /* BUG: If turned off MMC will be affected. */ + regulator-always-on; + }; + + // supplies to the on-board eMMC + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-name = "V-eMMC1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + }; + + // supply for VAUX3; SDcard slots + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-name = "V-MMC-SD"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + }; + + // supply for v-intcore12; VINTCORE12 LDO + ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + regulator-name = "V-INTCORE"; + }; + + // supply for tvout; gpadc; TVOUT LDO + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-name = "V-TVOUT"; + }; + + // supply for ab8500-usb; USB LDO + ab8500_ldo_usb_reg: ab8500_ldo_usb { + regulator-name = "dummy"; + }; + + // supply for ab8500-vaudio; VAUDIO LDO + ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-name = "V-AUD"; + }; + + // supply for v-anamic1 VAMic1-LDO + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-name = "V-AMIC1"; + }; + + // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 + ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + regulator-name = "V-AMIC2"; + }; + + // supply for v-dmic; VDMIC LDO + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-name = "V-DMIC"; + }; + + // supply for U8500 CSI/DSI; VANA LDO + ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-name = "V-CSI/DSI"; + }; + }; }; }; @@ -235,7 +432,8 @@ status = "disabled"; // Add one of these for each child device - cs-gpios = <&gpio0 31 &gpio4 14 &gpio4 16 &gpio6 22 &gpio7 0>; + cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4 + &gpio6 22 0x4 &gpio7 0 0x4>; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 2b1a166d41f..386c769c38d 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -213,5 +213,14 @@ status = "disabled"; }; }; + nand@d8000000 { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "fsl,imx27-nand"; + reg = <0xd8000000 0x1000>; + interrupts = <29>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index d99dc04f0d9..ec3c3397511 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -20,6 +20,16 @@ reg = <0x00000000 0x20000000>; }; + en_3v3_reg: en_3v3 { + compatible = "regulator-fixed"; + regulator-name = "en-3v3-fixed-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio0 26 0x4>; // 26 + startup-delay-us = <5000>; + enable-active-high; + }; + gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -30,35 +40,35 @@ wakeup = <1>; linux,code = <2>; label = "userpb"; - gpios = <&gpio1 0 0>; + gpios = <&gpio1 0 0x4>; }; button@2 { debounce_interval = <50>; wakeup = <1>; linux,code = <3>; label = "extkb1"; - gpios = <&gpio4 23 0>; + gpios = <&gpio4 23 0x4>; }; button@3 { debounce_interval = <50>; wakeup = <1>; linux,code = <4>; label = "extkb2"; - gpios = <&gpio4 24 0>; + gpios = <&gpio4 24 0x4>; }; button@4 { debounce_interval = <50>; wakeup = <1>; linux,code = <5>; label = "extkb3"; - gpios = <&gpio5 1 0>; + gpios = <&gpio5 1 0x4>; }; button@5 { debounce_interval = <50>; wakeup = <1>; linux,code = <6>; label = "extkb4"; - gpios = <&gpio5 2 0>; + gpios = <&gpio5 2 0x4>; }; }; @@ -66,12 +76,11 @@ compatible = "gpio-leds"; used-led { label = "user_led"; - gpios = <&gpio4 14>; + gpios = <&gpio4 14 0x4>; }; }; soc-u9500 { - external-bus@50000000 { status = "okay"; @@ -80,6 +89,9 @@ reg = <0 0x10000>; interrupts = <12 0x1>; interrupt-parent = <&gpio4>; + vdd33a-supply = <&en_3v3_reg>; + vddvario-supply = <&db8500_vape_reg>; + reg-shift = <1>; reg-io-width = <2>; @@ -91,11 +103,13 @@ sdi@80126000 { status = "enabled"; - cd-gpios = <&gpio6 26>; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + cd-gpios = <&gpio6 26 0x4>; // 218 }; sdi@80114000 { status = "enabled"; + vmmc-supply = <&ab8500_ldo_aux2_reg>; }; uart@80120000 { @@ -114,7 +128,7 @@ tc3589x@42 { //compatible = "tc3589x"; reg = <0x42>; - interrupts = <25>; + gpios = <&gpio6 25 0x4>; interrupt-parent = <&gpio6>; }; tps61052@33 { |