diff options
Diffstat (limited to 'arch/arm/common/vic.c')
-rw-r--r-- | arch/arm/common/vic.c | 464 |
1 files changed, 0 insertions, 464 deletions
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c deleted file mode 100644 index 8f324b99416..00000000000 --- a/arch/arm/common/vic.c +++ /dev/null @@ -1,464 +0,0 @@ -/* - * linux/arch/arm/common/vic.c - * - * Copyright (C) 1999 - 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/export.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/io.h> -#include <linux/irqdomain.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/syscore_ops.h> -#include <linux/device.h> -#include <linux/amba/bus.h> - -#include <asm/exception.h> -#include <asm/mach/irq.h> -#include <asm/hardware/vic.h> - -/** - * struct vic_device - VIC PM device - * @irq: The IRQ number for the base of the VIC. - * @base: The register base for the VIC. - * @valid_sources: A bitmask of valid interrupts - * @resume_sources: A bitmask of interrupts for resume. - * @resume_irqs: The IRQs enabled for resume. - * @int_select: Save for VIC_INT_SELECT. - * @int_enable: Save for VIC_INT_ENABLE. - * @soft_int: Save for VIC_INT_SOFT. - * @protect: Save for VIC_PROTECT. - * @domain: The IRQ domain for the VIC. - */ -struct vic_device { - void __iomem *base; - int irq; - u32 valid_sources; - u32 resume_sources; - u32 resume_irqs; - u32 int_select; - u32 int_enable; - u32 soft_int; - u32 protect; - struct irq_domain *domain; -}; - -/* we cannot allocate memory when VICs are initially registered */ -static struct vic_device vic_devices[CONFIG_ARM_VIC_NR]; - -static int vic_id; - -/** - * vic_init2 - common initialisation code - * @base: Base of the VIC. - * - * Common initialisation code for registration - * and resume. -*/ -static void vic_init2(void __iomem *base) -{ - int i; - - for (i = 0; i < 16; i++) { - void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4); - writel(VIC_VECT_CNTL_ENABLE | i, reg); - } - - writel(32, base + VIC_PL190_DEF_VECT_ADDR); -} - -#ifdef CONFIG_PM -static void resume_one_vic(struct vic_device *vic) -{ - void __iomem *base = vic->base; - - printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base); - - /* re-initialise static settings */ - vic_init2(base); - - writel(vic->int_select, base + VIC_INT_SELECT); - writel(vic->protect, base + VIC_PROTECT); - - /* set the enabled ints and then clear the non-enabled */ - writel(vic->int_enable, base + VIC_INT_ENABLE); - writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR); - - /* and the same for the soft-int register */ - - writel(vic->soft_int, base + VIC_INT_SOFT); - writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR); -} - -static void vic_resume(void) -{ - int id; - - for (id = vic_id - 1; id >= 0; id--) - resume_one_vic(vic_devices + id); -} - -static void suspend_one_vic(struct vic_device *vic) -{ - void __iomem *base = vic->base; - - printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base); - - vic->int_select = readl(base + VIC_INT_SELECT); - vic->int_enable = readl(base + VIC_INT_ENABLE); - vic->soft_int = readl(base + VIC_INT_SOFT); - vic->protect = readl(base + VIC_PROTECT); - - /* set the interrupts (if any) that are used for - * resuming the system */ - - writel(vic->resume_irqs, base + VIC_INT_ENABLE); - writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR); -} - -static int vic_suspend(void) -{ - int id; - - for (id = 0; id < vic_id; id++) - suspend_one_vic(vic_devices + id); - - return 0; -} - -struct syscore_ops vic_syscore_ops = { - .suspend = vic_suspend, - .resume = vic_resume, -}; - -/** - * vic_pm_init - initicall to register VIC pm - * - * This is called via late_initcall() to register - * the resources for the VICs due to the early - * nature of the VIC's registration. -*/ -static int __init vic_pm_init(void) -{ - if (vic_id > 0) - register_syscore_ops(&vic_syscore_ops); - - return 0; -} -late_initcall(vic_pm_init); -#endif /* CONFIG_PM */ - -static struct irq_chip vic_chip; - -static int vic_irqdomain_map(struct irq_domain *d, unsigned int irq, - irq_hw_number_t hwirq) -{ - struct vic_device *v = d->host_data; - - /* Skip invalid IRQs, only register handlers for the real ones */ - if (!(v->valid_sources & (1 << hwirq))) - return -ENOTSUPP; - irq_set_chip_and_handler(irq, &vic_chip, handle_level_irq); - irq_set_chip_data(irq, v->base); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - return 0; -} - -static struct irq_domain_ops vic_irqdomain_ops = { - .map = vic_irqdomain_map, - .xlate = irq_domain_xlate_onetwocell, -}; - -/** - * vic_register() - Register a VIC. - * @base: The base address of the VIC. - * @irq: The base IRQ for the VIC. - * @valid_sources: bitmask of valid interrupts - * @resume_sources: bitmask of interrupts allowed for resume sources. - * @node: The device tree node associated with the VIC. - * - * Register the VIC with the system device tree so that it can be notified - * of suspend and resume requests and ensure that the correct actions are - * taken to re-instate the settings on resume. - * - * This also configures the IRQ domain for the VIC. - */ -static void __init vic_register(void __iomem *base, unsigned int irq, - u32 valid_sources, u32 resume_sources, - struct device_node *node) -{ - struct vic_device *v; - int i; - - if (vic_id >= ARRAY_SIZE(vic_devices)) { - printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__); - return; - } - - v = &vic_devices[vic_id]; - v->base = base; - v->valid_sources = valid_sources; - v->resume_sources = resume_sources; - v->irq = irq; - vic_id++; - v->domain = irq_domain_add_simple(node, fls(valid_sources), irq, - &vic_irqdomain_ops, v); - /* create an IRQ mapping for each valid IRQ */ - for (i = 0; i < fls(valid_sources); i++) - if (valid_sources & (1 << i)) - irq_create_mapping(v->domain, i); -} - -static void vic_ack_irq(struct irq_data *d) -{ - void __iomem *base = irq_data_get_irq_chip_data(d); - unsigned int irq = d->hwirq; - writel(1 << irq, base + VIC_INT_ENABLE_CLEAR); - /* moreover, clear the soft-triggered, in case it was the reason */ - writel(1 << irq, base + VIC_INT_SOFT_CLEAR); -} - -static void vic_mask_irq(struct irq_data *d) -{ - void __iomem *base = irq_data_get_irq_chip_data(d); - unsigned int irq = d->hwirq; - writel(1 << irq, base + VIC_INT_ENABLE_CLEAR); -} - -static void vic_unmask_irq(struct irq_data *d) -{ - void __iomem *base = irq_data_get_irq_chip_data(d); - unsigned int irq = d->hwirq; - writel(1 << irq, base + VIC_INT_ENABLE); -} - -#if defined(CONFIG_PM) -static struct vic_device *vic_from_irq(unsigned int irq) -{ - struct vic_device *v = vic_devices; - unsigned int base_irq = irq & ~31; - int id; - - for (id = 0; id < vic_id; id++, v++) { - if (v->irq == base_irq) - return v; - } - - return NULL; -} - -static int vic_set_wake(struct irq_data *d, unsigned int on) -{ - struct vic_device *v = vic_from_irq(d->irq); - unsigned int off = d->hwirq; - u32 bit = 1 << off; - - if (!v) - return -EINVAL; - - if (!(bit & v->resume_sources)) - return -EINVAL; - - if (on) - v->resume_irqs |= bit; - else - v->resume_irqs &= ~bit; - - return 0; -} -#else -#define vic_set_wake NULL -#endif /* CONFIG_PM */ - -static struct irq_chip vic_chip = { - .name = "VIC", - .irq_ack = vic_ack_irq, - .irq_mask = vic_mask_irq, - .irq_unmask = vic_unmask_irq, - .irq_set_wake = vic_set_wake, -}; - -static void __init vic_disable(void __iomem *base) -{ - writel(0, base + VIC_INT_SELECT); - writel(0, base + VIC_INT_ENABLE); - writel(~0, base + VIC_INT_ENABLE_CLEAR); - writel(0, base + VIC_ITCR); - writel(~0, base + VIC_INT_SOFT_CLEAR); -} - -static void __init vic_clear_interrupts(void __iomem *base) -{ - unsigned int i; - - writel(0, base + VIC_PL190_VECT_ADDR); - for (i = 0; i < 19; i++) { - unsigned int value; - - value = readl(base + VIC_PL190_VECT_ADDR); - writel(value, base + VIC_PL190_VECT_ADDR); - } -} - -/* - * The PL190 cell from ARM has been modified by ST to handle 64 interrupts. - * The original cell has 32 interrupts, while the modified one has 64, - * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case - * the probe function is called twice, with base set to offset 000 - * and 020 within the page. We call this "second block". - */ -static void __init vic_init_st(void __iomem *base, unsigned int irq_start, - u32 vic_sources, struct device_node *node) -{ - unsigned int i; - int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0; - - /* Disable all interrupts initially. */ - vic_disable(base); - - /* - * Make sure we clear all existing interrupts. The vector registers - * in this cell are after the second block of general registers, - * so we can address them using standard offsets, but only from - * the second base address, which is 0x20 in the page - */ - if (vic_2nd_block) { - vic_clear_interrupts(base); - - /* ST has 16 vectors as well, but we don't enable them by now */ - for (i = 0; i < 16; i++) { - void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4); - writel(0, reg); - } - - writel(32, base + VIC_PL190_DEF_VECT_ADDR); - } - - vic_register(base, irq_start, vic_sources, 0, node); -} - -void __init __vic_init(void __iomem *base, int irq_start, - u32 vic_sources, u32 resume_sources, - struct device_node *node) -{ - unsigned int i; - u32 cellid = 0; - enum amba_vendor vendor; - - /* Identify which VIC cell this one is, by reading the ID */ - for (i = 0; i < 4; i++) { - void __iomem *addr; - addr = (void __iomem *)((u32)base & PAGE_MASK) + 0xfe0 + (i * 4); - cellid |= (readl(addr) & 0xff) << (8 * i); - } - vendor = (cellid >> 12) & 0xff; - printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n", - base, cellid, vendor); - - switch(vendor) { - case AMBA_VENDOR_ST: - vic_init_st(base, irq_start, vic_sources, node); - return; - default: - printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n"); - /* fall through */ - case AMBA_VENDOR_ARM: - break; - } - - /* Disable all interrupts initially. */ - vic_disable(base); - - /* Make sure we clear all existing interrupts */ - vic_clear_interrupts(base); - - vic_init2(base); - - vic_register(base, irq_start, vic_sources, resume_sources, node); -} - -/** - * vic_init() - initialise a vectored interrupt controller - * @base: iomem base address - * @irq_start: starting interrupt number, must be muliple of 32 - * @vic_sources: bitmask of interrupt sources to allow - * @resume_sources: bitmask of interrupt sources to allow for resume - */ -void __init vic_init(void __iomem *base, unsigned int irq_start, - u32 vic_sources, u32 resume_sources) -{ - __vic_init(base, irq_start, vic_sources, resume_sources, NULL); -} - -#ifdef CONFIG_OF -int __init vic_of_init(struct device_node *node, struct device_node *parent) -{ - void __iomem *regs; - - if (WARN(parent, "non-root VICs are not supported")) - return -EINVAL; - - regs = of_iomap(node, 0); - if (WARN_ON(!regs)) - return -EIO; - - /* - * Passing 0 as first IRQ makes the simple domain allocate descriptors - */ - __vic_init(regs, 0, ~0, ~0, node); - - return 0; -} -#endif /* CONFIG OF */ - -/* - * Handle each interrupt in a single VIC. Returns non-zero if we've - * handled at least one interrupt. This reads the status register - * before handling each interrupt, which is necessary given that - * handle_IRQ may briefly re-enable interrupts for soft IRQ handling. - */ -static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs) -{ - u32 stat, irq; - int handled = 0; - - while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) { - irq = ffs(stat) - 1; - handle_IRQ(irq_find_mapping(vic->domain, irq), regs); - handled = 1; - } - - return handled; -} - -/* - * Keep iterating over all registered VIC's until there are no pending - * interrupts. - */ -asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs) -{ - int i, handled; - - do { - for (i = 0, handled = 0; i < vic_id; ++i) - handled |= handle_one_vic(&vic_devices[i], regs); - } while (handled); -} |