summaryrefslogtreecommitdiffstats
path: root/arch/arm/common/vic.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/common/vic.c')
-rw-r--r--arch/arm/common/vic.c284
1 files changed, 140 insertions, 144 deletions
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index f232941de8a..ba65f6eedca 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -18,6 +18,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
@@ -28,48 +29,6 @@
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
-static void vic_ack_irq(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- irq &= 31;
- writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
- /* moreover, clear the soft-triggered, in case it was the reason */
- writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
-}
-
-static void vic_mask_irq(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- irq &= 31;
- writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void vic_unmask_irq(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- irq &= 31;
- writel(1 << irq, base + VIC_INT_ENABLE);
-}
-
-/**
- * vic_init2 - common initialisation code
- * @base: Base of the VIC.
- *
- * Common initialisation code for registeration
- * and resume.
-*/
-static void vic_init2(void __iomem *base)
-{
- int i;
-
- for (i = 0; i < 16; i++) {
- void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
- writel(VIC_VECT_CNTL_ENABLE | i, reg);
- }
-
- writel(32, base + VIC_PL190_DEF_VECT_ADDR);
-}
-
#if defined(CONFIG_PM)
/**
* struct vic_device - VIC PM device
@@ -99,13 +58,34 @@ struct vic_device {
/* we cannot allocate memory when VICs are initially registered */
static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
+static int vic_id;
+
static inline struct vic_device *to_vic(struct sys_device *sys)
{
return container_of(sys, struct vic_device, sysdev);
}
+#endif /* CONFIG_PM */
-static int vic_id;
+/**
+ * vic_init2 - common initialisation code
+ * @base: Base of the VIC.
+ *
+ * Common initialisation code for registeration
+ * and resume.
+*/
+static void vic_init2(void __iomem *base)
+{
+ int i;
+ for (i = 0; i < 16; i++) {
+ void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+ writel(VIC_VECT_CNTL_ENABLE | i, reg);
+ }
+
+ writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+}
+
+#if defined(CONFIG_PM)
static int vic_class_resume(struct sys_device *dev)
{
struct vic_device *vic = to_vic(dev);
@@ -159,31 +139,6 @@ struct sysdev_class vic_class = {
};
/**
- * vic_pm_register - Register a VIC for later power management control
- * @base: The base address of the VIC.
- * @irq: The base IRQ for the VIC.
- * @resume_sources: bitmask of interrupts allowed for resume sources.
- *
- * Register the VIC with the system device tree so that it can be notified
- * of suspend and resume requests and ensure that the correct actions are
- * taken to re-instate the settings on resume.
- */
-static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
-{
- struct vic_device *v;
-
- if (vic_id >= ARRAY_SIZE(vic_devices))
- printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
- else {
- v = &vic_devices[vic_id];
- v->base = base;
- v->resume_sources = resume_sources;
- v->irq = irq;
- vic_id++;
- }
-}
-
-/**
* vic_pm_init - initicall to register VIC pm
*
* This is called via late_initcall() to register
@@ -219,9 +174,60 @@ static int __init vic_pm_init(void)
return 0;
}
-
late_initcall(vic_pm_init);
+/**
+ * vic_pm_register - Register a VIC for later power management control
+ * @base: The base address of the VIC.
+ * @irq: The base IRQ for the VIC.
+ * @resume_sources: bitmask of interrupts allowed for resume sources.
+ *
+ * Register the VIC with the system device tree so that it can be notified
+ * of suspend and resume requests and ensure that the correct actions are
+ * taken to re-instate the settings on resume.
+ */
+static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+{
+ struct vic_device *v;
+
+ if (vic_id >= ARRAY_SIZE(vic_devices))
+ printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
+ else {
+ v = &vic_devices[vic_id];
+ v->base = base;
+ v->resume_sources = resume_sources;
+ v->irq = irq;
+ vic_id++;
+ }
+}
+#else
+static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
+#endif /* CONFIG_PM */
+
+static void vic_ack_irq(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ irq &= 31;
+ writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+ /* moreover, clear the soft-triggered, in case it was the reason */
+ writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
+}
+
+static void vic_mask_irq(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ irq &= 31;
+ writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void vic_unmask_irq(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ irq &= 31;
+ writel(1 << irq, base + VIC_INT_ENABLE);
+}
+
+#if defined(CONFIG_PM)
static struct vic_device *vic_from_irq(unsigned int irq)
{
struct vic_device *v = vic_devices;
@@ -255,71 +261,32 @@ static int vic_set_wake(unsigned int irq, unsigned int on)
return 0;
}
-
#else
-static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
-
#define vic_set_wake NULL
#endif /* CONFIG_PM */
static struct irq_chip vic_chip = {
- .name = "VIC",
- .ack = vic_ack_irq,
- .mask = vic_mask_irq,
- .unmask = vic_unmask_irq,
- .set_wake = vic_set_wake,
+ .name = "VIC",
+ .ack = vic_ack_irq,
+ .mask = vic_mask_irq,
+ .unmask = vic_unmask_irq,
+ .set_wake = vic_set_wake,
};
-/* The PL190 cell from ARM has been modified by ST, so handle both here */
-static void vik_init_st(void __iomem *base, unsigned int irq_start,
- u32 vic_sources);
-
-/**
- * vic_init - initialise a vectored interrupt controller
- * @base: iomem base address
- * @irq_start: starting interrupt number, must be muliple of 32
- * @vic_sources: bitmask of interrupt sources to allow
- * @resume_sources: bitmask of interrupt sources to allow for resume
- */
-void __init vic_init(void __iomem *base, unsigned int irq_start,
- u32 vic_sources, u32 resume_sources)
+static void __init vic_disable(void __iomem *base)
{
- unsigned int i;
- u32 cellid = 0;
- enum amba_vendor vendor;
-
- /* Identify which VIC cell this one is, by reading the ID */
- for (i = 0; i < 4; i++) {
- u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
- cellid |= (readl(addr) & 0xff) << (8 * i);
- }
- vendor = (cellid >> 12) & 0xff;
- printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
- base, cellid, vendor);
-
- switch(vendor) {
- case AMBA_VENDOR_ST:
- vik_init_st(base, irq_start, vic_sources);
- return;
- default:
- printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
- /* fall through */
- case AMBA_VENDOR_ARM:
- break;
- }
-
- /* Disable all interrupts initially. */
-
writel(0, base + VIC_INT_SELECT);
writel(0, base + VIC_INT_ENABLE);
writel(~0, base + VIC_INT_ENABLE_CLEAR);
writel(0, base + VIC_IRQ_STATUS);
writel(0, base + VIC_ITCR);
writel(~0, base + VIC_INT_SOFT_CLEAR);
+}
+
+static void __init vic_clear_interrupts(void __iomem *base)
+{
+ unsigned int i;
- /*
- * Make sure we clear all existing interrupts
- */
writel(0, base + VIC_PL190_VECT_ADDR);
for (i = 0; i < 19; i++) {
unsigned int value;
@@ -327,8 +294,12 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
value = readl(base + VIC_PL190_VECT_ADDR);
writel(value, base + VIC_PL190_VECT_ADDR);
}
+}
- vic_init2(base);
+static void __init vic_set_irq_sources(void __iomem *base,
+ unsigned int irq_start, u32 vic_sources)
+{
+ unsigned int i;
for (i = 0; i < 32; i++) {
if (vic_sources & (1 << i)) {
@@ -340,8 +311,6 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
}
-
- vic_pm_register(base, irq_start, resume_sources);
}
/*
@@ -351,20 +320,14 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
* the probe function is called twice, with base set to offset 000
* and 020 within the page. We call this "second block".
*/
-static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
+static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
u32 vic_sources)
{
unsigned int i;
int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
/* Disable all interrupts initially. */
-
- writel(0, base + VIC_INT_SELECT);
- writel(0, base + VIC_INT_ENABLE);
- writel(~0, base + VIC_INT_ENABLE_CLEAR);
- writel(0, base + VIC_IRQ_STATUS);
- writel(0, base + VIC_ITCR);
- writel(~0, base + VIC_INT_SOFT_CLEAR);
+ vic_disable(base);
/*
* Make sure we clear all existing interrupts. The vector registers
@@ -373,13 +336,8 @@ static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
* the second base address, which is 0x20 in the page
*/
if (vic_2nd_block) {
- writel(0, base + VIC_PL190_VECT_ADDR);
- for (i = 0; i < 19; i++) {
- unsigned int value;
+ vic_clear_interrupts(base);
- value = readl(base + VIC_PL190_VECT_ADDR);
- writel(value, base + VIC_PL190_VECT_ADDR);
- }
/* ST has 16 vectors as well, but we don't enable them by now */
for (i = 0; i < 16; i++) {
void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
@@ -389,14 +347,52 @@ static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
}
- for (i = 0; i < 32; i++) {
- if (vic_sources & (1 << i)) {
- unsigned int irq = irq_start + i;
+ vic_set_irq_sources(base, irq_start, vic_sources);
+}
- set_irq_chip(irq, &vic_chip);
- set_irq_chip_data(irq, base);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
+/**
+ * vic_init - initialise a vectored interrupt controller
+ * @base: iomem base address
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
+ */
+void __init vic_init(void __iomem *base, unsigned int irq_start,
+ u32 vic_sources, u32 resume_sources)
+{
+ unsigned int i;
+ u32 cellid = 0;
+ enum amba_vendor vendor;
+
+ /* Identify which VIC cell this one is, by reading the ID */
+ for (i = 0; i < 4; i++) {
+ u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
+ cellid |= (readl(addr) & 0xff) << (8 * i);
}
+ vendor = (cellid >> 12) & 0xff;
+ printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
+ base, cellid, vendor);
+
+ switch(vendor) {
+ case AMBA_VENDOR_ST:
+ vic_init_st(base, irq_start, vic_sources);
+ return;
+ default:
+ printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
+ /* fall through */
+ case AMBA_VENDOR_ARM:
+ break;
+ }
+
+ /* Disable all interrupts initially. */
+ vic_disable(base);
+
+ /* Make sure we clear all existing interrupts */
+ vic_clear_interrupts(base);
+
+ vic_init2(base);
+
+ vic_set_irq_sources(base, irq_start, vic_sources);
+
+ vic_pm_register(base, irq_start, resume_sources);
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-14 01:28:31 +0000