diff options
Diffstat (limited to 'arch/arm/common')
| -rw-r--r-- | arch/arm/common/dmabounce.c | 2 | ||||
| -rw-r--r-- | arch/arm/common/gic.c | 2 | ||||
| -rw-r--r-- | arch/arm/common/sharpsl_param.c | 2 | ||||
| -rw-r--r-- | arch/arm/common/sharpsl_pm.c | 10 |
4 files changed, 8 insertions, 8 deletions
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 6fbe7722aa4..b36b1e8a105 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -6,7 +6,7 @@ * copy data to/from buffers located outside the DMA region. This * only works for systems in which DMA memory is at the bottom of * RAM, the remainder of memory is at the top and the DMA memory - * can be marked as ZONE_DMA. Anything beyond that such as discontigous + * can be marked as ZONE_DMA. Anything beyond that such as discontiguous * DMA windows will require custom implementations that reserve memory * areas at early bootup. * diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 2ae0bd1c907..0c89bd35e06 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -72,7 +72,7 @@ static inline unsigned int gic_irq(unsigned int irq) * unmask it, in the same way we need to unmask an interrupt when * we first enable it. * - * The GIC has a seperate notion of "end of interrupt" to re-enable + * The GIC has a separate notion of "end of interrupt" to re-enable * an interrupt after handling, in order to support hardware * prioritisation. * diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c index c94864c5b1a..aad4d94ba8f 100644 --- a/arch/arm/common/sharpsl_param.c +++ b/arch/arm/common/sharpsl_param.c @@ -20,7 +20,7 @@ * typically including LCD parameters are loaded by the bootloader at the * address PARAM_BASE. As the kernel will overwrite them, we need to store * them early in the boot process, then pass them to the appropriate drivers. - * Not all devices use all paramaters but the format is common to all. + * Not all devices use all parameters but the format is common to all. */ #ifdef CONFIG_ARCH_SA1100 #define PARAM_BASE 0xe8ffc000 diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index c8e78d96e59..3bf3a927ae2 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -291,7 +291,7 @@ static void sharpsl_chrg_full_timer(unsigned long data) } /* Charging Finished Interrupt (Not present on Corgi) */ -/* Can trigger at the same time as an AC staus change so +/* Can trigger at the same time as an AC status change so delay until after that has been processed */ irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id) { @@ -635,7 +635,7 @@ static int sharpsl_fatal_check(void) static int sharpsl_off_charge_error(void) { - dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n"); + dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n"); sharpsl_pm.machinfo->charge(0); sharpsl_pm_led(SHARPSL_LED_ERROR); sharpsl_pm.charge_mode = CHRG_ERROR; @@ -691,14 +691,14 @@ static int sharpsl_off_charge_battery(void) time = RCNR; while(1) { - /* Check if any wakeup event had occured */ + /* Check if any wakeup event had occurred */ if (sharpsl_pm.machinfo->charger_wakeup() != 0) return 0; /* Check for timeout */ if ((RCNR - time) > SHARPSL_WAIT_CO_TIME) return 1; if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) { - dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n"); + dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n"); sharpsl_pm.full_count++; sharpsl_pm.machinfo->charge(0); mdelay(SHARPSL_CHARGE_WAIT_TIME); @@ -714,7 +714,7 @@ static int sharpsl_off_charge_battery(void) time = RCNR; while(1) { - /* Check if any wakeup event had occured */ + /* Check if any wakeup event had occurred */ if (sharpsl_pm.machinfo->charger_wakeup() != 0) return 0; /* Check for timeout */ |