diff options
Diffstat (limited to 'arch/arm/include/asm/hardware')
| -rw-r--r-- | arch/arm/include/asm/hardware/cache-l2x0.h | 62 | ||||
| -rw-r--r-- | arch/arm/include/asm/hardware/entry-macro-gic.S | 19 | ||||
| -rw-r--r-- | arch/arm/include/asm/hardware/gic.h | 19 | ||||
| -rw-r--r-- | arch/arm/include/asm/hardware/iop3xx-gpio.h | 2 | ||||
| -rw-r--r-- | arch/arm/include/asm/hardware/it8152.h | 2 | ||||
| -rw-r--r-- | arch/arm/include/asm/hardware/pl080.h | 4 |
6 files changed, 84 insertions, 24 deletions
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 16bd4803158..7df239bcdf2 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -20,6 +20,8 @@ #ifndef __ASM_ARM_HARDWARE_L2X0_H #define __ASM_ARM_HARDWARE_L2X0_H +#include <linux/errno.h> + #define L2X0_CACHE_ID 0x000 #define L2X0_CACHE_TYPE 0x004 #define L2X0_CTRL 0x100 @@ -45,8 +47,15 @@ #define L2X0_CLEAN_INV_LINE_PA 0x7F0 #define L2X0_CLEAN_INV_LINE_IDX 0x7F8 #define L2X0_CLEAN_INV_WAY 0x7FC -#define L2X0_LOCKDOWN_WAY_D 0x900 -#define L2X0_LOCKDOWN_WAY_I 0x904 +/* + * The lockdown registers repeat 8 times for L310, the L210 has only one + * D and one I lockdown register at 0x0900 and 0x0904. + */ +#define L2X0_LOCKDOWN_WAY_D_BASE 0x900 +#define L2X0_LOCKDOWN_WAY_I_BASE 0x904 +#define L2X0_LOCKDOWN_STRIDE 0x08 +#define L2X0_ADDR_FILTER_START 0xC00 +#define L2X0_ADDR_FILTER_END 0xC04 #define L2X0_TEST_OPERATION 0xF00 #define L2X0_LINE_DATA 0xF10 #define L2X0_LINE_TAG 0xF30 @@ -60,11 +69,26 @@ #define L2X0_CACHE_ID_PART_MASK (0xf << 6) #define L2X0_CACHE_ID_PART_L210 (1 << 6) #define L2X0_CACHE_ID_PART_L310 (3 << 6) +#define L2X0_CACHE_ID_RTL_MASK 0x3f +#define L2X0_CACHE_ID_RTL_R0P0 0x0 +#define L2X0_CACHE_ID_RTL_R1P0 0x2 +#define L2X0_CACHE_ID_RTL_R2P0 0x4 +#define L2X0_CACHE_ID_RTL_R3P0 0x5 +#define L2X0_CACHE_ID_RTL_R3P1 0x6 +#define L2X0_CACHE_ID_RTL_R3P2 0x8 #define L2X0_AUX_CTRL_MASK 0xc0000fff +#define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT 0 +#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK 0x7 +#define L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT 3 +#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK (0x7 << 3) +#define L2X0_AUX_CTRL_TAG_LATENCY_SHIFT 6 +#define L2X0_AUX_CTRL_TAG_LATENCY_MASK (0x7 << 6) +#define L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT 9 +#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK (0x7 << 9) #define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16 #define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17 -#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x3 << 17) +#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x7 << 17) #define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT 22 #define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT 26 #define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT 27 @@ -72,8 +96,40 @@ #define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT 29 #define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT 30 +#define L2X0_LATENCY_CTRL_SETUP_SHIFT 0 +#define L2X0_LATENCY_CTRL_RD_SHIFT 4 +#define L2X0_LATENCY_CTRL_WR_SHIFT 8 + +#define L2X0_ADDR_FILTER_EN 1 + #ifndef __ASSEMBLY__ extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask); +#if defined(CONFIG_CACHE_L2X0) && defined(CONFIG_OF) +extern int l2x0_of_init(__u32 aux_val, __u32 aux_mask); +#else +static inline int l2x0_of_init(__u32 aux_val, __u32 aux_mask) +{ + return -ENODEV; +} #endif +struct l2x0_regs { + unsigned long phy_base; + unsigned long aux_ctrl; + /* + * Whether the following registers need to be saved/restored + * depends on platform + */ + unsigned long tag_latency; + unsigned long data_latency; + unsigned long filter_start; + unsigned long filter_end; + unsigned long prefetch_ctrl; + unsigned long pwr_ctrl; +}; + +extern struct l2x0_regs l2x0_saved_regs; + +#endif /* __ASSEMBLY__ */ + #endif diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S index c115b82fe80..74ebc803904 100644 --- a/arch/arm/include/asm/hardware/entry-macro-gic.S +++ b/arch/arm/include/asm/hardware/entry-macro-gic.S @@ -22,15 +22,11 @@ * interrupt controller spec. To wit: * * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. + * 16-31 are local. We allow 30 to be used for the watchdog. * 32-1020 are global * 1021-1022 are reserved * 1023 is "spurious" (no interrupt) * - * For now, we ignore all local interrupts so only return an interrupt if it's - * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. - * * A simple read from the controller will tell us the number of the highest * priority enabled interrupt. We then just need to check whether it is in the * valid range for an IRQ (30-1020 inclusive). @@ -43,7 +39,7 @@ ldr \tmp, =1021 bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #29 + cmp \irqnr, #15 cmpcc \irqnr, \irqnr cmpne \irqnr, \tmp cmpcs \irqnr, \irqnr @@ -62,14 +58,3 @@ strcc \irqstat, [\base, #GIC_CPU_EOI] cmpcs \irqnr, \irqnr .endm - -/* As above, this assumes that irqstat and base are preserved.. */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 - .endm diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h index 435d3f86c70..3e91f22046f 100644 --- a/arch/arm/include/asm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -33,19 +33,32 @@ #define GIC_DIST_SOFTINT 0xf00 #ifndef __ASSEMBLY__ +#include <linux/irqdomain.h> +struct device_node; + extern void __iomem *gic_cpu_base_addr; extern struct irq_chip gic_arch_extn; -void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *); +void gic_init(unsigned int, int, void __iomem *, void __iomem *); +int gic_of_init(struct device_node *node, struct device_node *parent); void gic_secondary_init(unsigned int); void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); void gic_raise_softirq(const struct cpumask *mask, unsigned int irq); -void gic_enable_ppi(unsigned int); struct gic_chip_data { - unsigned int irq_offset; void __iomem *dist_base; void __iomem *cpu_base; +#ifdef CONFIG_CPU_PM + u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)]; + u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)]; + u32 saved_spi_target[DIV_ROUND_UP(1020, 4)]; + u32 __percpu *saved_ppi_enable; + u32 __percpu *saved_ppi_conf; +#endif +#ifdef CONFIG_IRQ_DOMAIN + struct irq_domain domain; +#endif + unsigned int gic_irqs; }; #endif diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h index b69d972b1f7..9eda7dc92ad 100644 --- a/arch/arm/include/asm/hardware/iop3xx-gpio.h +++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h @@ -28,6 +28,8 @@ #include <mach/hardware.h> #include <asm-generic/gpio.h> +#define __ARM_GPIOLIB_COMPLEX + #define IOP3XX_N_GPIOS 8 static inline int gpio_get_value(unsigned gpio) diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h index b3fea38d55c..43cab498bc2 100644 --- a/arch/arm/include/asm/hardware/it8152.h +++ b/arch/arm/include/asm/hardware/it8152.h @@ -9,7 +9,7 @@ #ifndef __ASM_HARDWARE_IT8152_H #define __ASM_HARDWARE_IT8152_H -extern unsigned long it8152_base_address; +extern void __iomem *it8152_base_address; #define IT8152_IO_BASE (it8152_base_address + 0x03e00000) #define IT8152_CFGREG_BASE (it8152_base_address + 0x03f00000) diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h index e4a04e4e562..33c78d7af2e 100644 --- a/arch/arm/include/asm/hardware/pl080.h +++ b/arch/arm/include/asm/hardware/pl080.h @@ -21,6 +21,9 @@ * OneNAND features. */ +#ifndef ASM_PL080_H +#define ASM_PL080_H + #define PL080_INT_STATUS (0x00) #define PL080_TC_STATUS (0x04) #define PL080_TC_CLEAR (0x08) @@ -138,3 +141,4 @@ struct pl080s_lli { u32 control1; }; +#endif /* ASM_PL080_H */ |