diff options
Diffstat (limited to 'arch/arm/kernel/head.S')
| -rw-r--r-- | arch/arm/kernel/head.S | 207 |
1 files changed, 1 insertions, 206 deletions
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 53b6901f70a..04b66a9328e 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -102,49 +102,6 @@ ENTRY(stext) adr lr, __enable_mmu @ return (PIC) address add pc, r10, #PROCINFO_INITFUNC - .type __switch_data, %object -__switch_data: - .long __mmap_switched - .long __data_loc @ r4 - .long __data_start @ r5 - .long __bss_start @ r6 - .long _end @ r7 - .long processor_id @ r4 - .long __machine_arch_type @ r5 - .long cr_alignment @ r6 - .long init_thread_union + THREAD_START_SP @ sp - -/* - * The following fragment of code is executed with the MMU on, and uses - * absolute addresses; this is not position independent. - * - * r0 = cp#15 control register - * r1 = machine ID - * r9 = processor ID - */ - .type __mmap_switched, %function -__mmap_switched: - adr r3, __switch_data + 4 - - ldmia r3!, {r4, r5, r6, r7} - cmp r4, r5 @ Copy data segment if needed -1: cmpne r5, r6 - ldrne fp, [r4], #4 - strne fp, [r5], #4 - bne 1b - - mov fp, #0 @ Clear BSS (and zero fp) -1: cmp r6, r7 - strcc fp, [r6],#4 - bcc 1b - - ldmia r3, {r4, r5, r6, sp} - str r9, [r4] @ Save processor ID - str r1, [r5] @ Save machine type - bic r4, r0, #CR_A @ Clear 'A' bit - stmia r6, {r0, r4} @ Save control register values - b start_kernel - #if defined(CONFIG_SMP) .type secondary_startup, #function ENTRY(secondary_startup) @@ -367,166 +324,4 @@ __create_page_tables: mov pc, lr .ltorg - - -/* - * Exception handling. Something went wrong and we can't proceed. We - * ought to tell the user, but since we don't have any guarantee that - * we're even running on the right architecture, we do virtually nothing. - * - * If CONFIG_DEBUG_LL is set we try to print out something about the error - * and hope for the best (useful if bootloader fails to pass a proper - * machine ID for example). - */ - - .type __error_p, %function -__error_p: -#ifdef CONFIG_DEBUG_LL - adr r0, str_p1 - bl printascii - b __error -str_p1: .asciz "\nError: unrecognized/unsupported processor variant.\n" - .align -#endif - - .type __error_a, %function -__error_a: -#ifdef CONFIG_DEBUG_LL - mov r4, r1 @ preserve machine ID - adr r0, str_a1 - bl printascii - mov r0, r4 - bl printhex8 - adr r0, str_a2 - bl printascii - adr r3, 3f - ldmia r3, {r4, r5, r6} @ get machine desc list - sub r4, r3, r4 @ get offset between virt&phys - add r5, r5, r4 @ convert virt addresses to - add r6, r6, r4 @ physical address space -1: ldr r0, [r5, #MACHINFO_TYPE] @ get machine type - bl printhex8 - mov r0, #'\t' - bl printch - ldr r0, [r5, #MACHINFO_NAME] @ get machine name - add r0, r0, r4 - bl printascii - mov r0, #'\n' - bl printch - add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc - cmp r5, r6 - blo 1b - adr r0, str_a3 - bl printascii - b __error -str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x" -str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n" -str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n" - .align -#endif - - .type __error, %function -__error: -#ifdef CONFIG_ARCH_RPC -/* - * Turn the screen red on a error - RiscPC only. - */ - mov r0, #0x02000000 - mov r3, #0x11 - orr r3, r3, r3, lsl #8 - orr r3, r3, r3, lsl #16 - str r3, [r0], #4 - str r3, [r0], #4 - str r3, [r0], #4 - str r3, [r0], #4 -#endif -1: mov r0, r0 - b 1b - - -/* - * Read processor ID register (CP#15, CR0), and look up in the linker-built - * supported processor list. Note that we can't use the absolute addresses - * for the __proc_info lists since we aren't running with the MMU on - * (and therefore, we are not in the correct address space). We have to - * calculate the offset. - * - * r9 = cpuid - * Returns: - * r3, r4, r6 corrupted - * r5 = proc_info pointer in physical address space - * r9 = cpuid (preserved) - */ - .type __lookup_processor_type, %function -__lookup_processor_type: - adr r3, 3f - ldmda r3, {r5 - r7} - sub r3, r3, r7 @ get offset between virt&phys - add r5, r5, r3 @ convert virt addresses to - add r6, r6, r3 @ physical address space -1: ldmia r5, {r3, r4} @ value, mask - and r4, r4, r9 @ mask wanted bits - teq r3, r4 - beq 2f - add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list) - cmp r5, r6 - blo 1b - mov r5, #0 @ unknown processor -2: mov pc, lr - -/* - * This provides a C-API version of the above function. - */ -ENTRY(lookup_processor_type) - stmfd sp!, {r4 - r7, r9, lr} - mov r9, r0 - bl __lookup_processor_type - mov r0, r5 - ldmfd sp!, {r4 - r7, r9, pc} - -/* - * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for - * more information about the __proc_info and __arch_info structures. - */ - .long __proc_info_begin - .long __proc_info_end -3: .long . - .long __arch_info_begin - .long __arch_info_end - -/* - * Lookup machine architecture in the linker-build list of architectures. - * Note that we can't use the absolute addresses for the __arch_info - * lists since we aren't running with the MMU on (and therefore, we are - * not in the correct address space). We have to calculate the offset. - * - * r1 = machine architecture number - * Returns: - * r3, r4, r6 corrupted - * r5 = mach_info pointer in physical address space - */ - .type __lookup_machine_type, %function -__lookup_machine_type: - adr r3, 3b - ldmia r3, {r4, r5, r6} - sub r3, r3, r4 @ get offset between virt&phys - add r5, r5, r3 @ convert virt addresses to - add r6, r6, r3 @ physical address space -1: ldr r3, [r5, #MACHINFO_TYPE] @ get machine type - teq r3, r1 @ matches loader number? - beq 2f @ found - add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc - cmp r5, r6 - blo 1b - mov r5, #0 @ unknown machine -2: mov pc, lr - -/* - * This provides a C-API version of the above function. - */ -ENTRY(lookup_machine_type) - stmfd sp!, {r4 - r6, lr} - mov r1, r0 - bl __lookup_machine_type - mov r0, r5 - ldmfd sp!, {r4 - r6, pc} +#include "head-common.S" |