diff options
Diffstat (limited to 'arch/arm/kernel')
-rw-r--r-- | arch/arm/kernel/Makefile | 18 | ||||
-rw-r--r-- | arch/arm/kernel/asm-offsets.c | 6 | ||||
-rw-r--r-- | arch/arm/kernel/entry-common.S | 4 | ||||
-rw-r--r-- | arch/arm/kernel/entry-header.S | 124 | ||||
-rw-r--r-- | arch/arm/kernel/entry-v7m.S | 143 | ||||
-rw-r--r-- | arch/arm/kernel/head-nommu.S | 170 | ||||
-rw-r--r-- | arch/arm/kernel/head.S | 10 | ||||
-rw-r--r-- | arch/arm/kernel/hyp-stub.S | 7 | ||||
-rw-r--r-- | arch/arm/kernel/psci.c | 7 | ||||
-rw-r--r-- | arch/arm/kernel/psci_smp.c | 84 | ||||
-rw-r--r-- | arch/arm/kernel/setup.c | 101 | ||||
-rw-r--r-- | arch/arm/kernel/signal.c | 9 | ||||
-rw-r--r-- | arch/arm/kernel/sleep.S | 97 | ||||
-rw-r--r-- | arch/arm/kernel/smp.c | 21 | ||||
-rw-r--r-- | arch/arm/kernel/suspend.c | 76 | ||||
-rw-r--r-- | arch/arm/kernel/traps.c | 8 |
16 files changed, 813 insertions, 72 deletions
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 5f3338eacad..fccfbdb03df 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -15,7 +15,7 @@ CFLAGS_REMOVE_return_address.o = -pg # Object file lists. -obj-y := elf.o entry-armv.o entry-common.o irq.o opcodes.o \ +obj-y := elf.o entry-common.o irq.o opcodes.o \ process.o ptrace.o return_address.o sched_clock.o \ setup.o signal.o stacktrace.o sys_arm.o time.o traps.o @@ -23,6 +23,12 @@ obj-$(CONFIG_ATAGS) += atags_parse.o obj-$(CONFIG_ATAGS_PROC) += atags_proc.o obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += atags_compat.o +ifeq ($(CONFIG_CPU_V7M),y) +obj-y += entry-v7m.o +else +obj-y += entry-armv.o +endif + obj-$(CONFIG_OC_ETM) += etm.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ISA_DMA_API) += dma.o @@ -32,7 +38,10 @@ obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o suspend.o -obj-$(CONFIG_SMP) += smp.o smp_tlb.o +obj-$(CONFIG_SMP) += smp.o +ifdef CONFIG_MMU +obj-$(CONFIG_SMP) += smp_tlb.o +endif obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o obj-$(CONFIG_HAVE_ARM_TWD) += smp_twd.o obj-$(CONFIG_ARM_ARCH_TIMER) += arch_timer.o @@ -82,6 +91,9 @@ obj-$(CONFIG_DEBUG_LL) += debug.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o -obj-$(CONFIG_ARM_PSCI) += psci.o +ifeq ($(CONFIG_ARM_PSCI),y) +obj-y += psci.o +obj-$(CONFIG_SMP) += psci_smp.o +endif extra-y := $(head-y) vmlinux.lds diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index ee68cce6b48..ded041711be 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -23,6 +23,7 @@ #include <asm/thread_info.h> #include <asm/memory.h> #include <asm/procinfo.h> +#include <asm/suspend.h> #include <asm/hardware/cache-l2x0.h> #include <linux/kbuild.h> @@ -145,6 +146,11 @@ int main(void) #ifdef MULTI_CACHE DEFINE(CACHE_FLUSH_KERN_ALL, offsetof(struct cpu_cache_fns, flush_kern_all)); #endif +#ifdef CONFIG_ARM_CPU_SUSPEND + DEFINE(SLEEP_SAVE_SP_SZ, sizeof(struct sleep_save_sp)); + DEFINE(SLEEP_SAVE_SP_PHYS, offsetof(struct sleep_save_sp, save_ptr_stash_phys)); + DEFINE(SLEEP_SAVE_SP_VIRT, offsetof(struct sleep_save_sp, save_ptr_stash)); +#endif BLANK(); DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL); DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE); diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 4bc816a74a2..94104bf6971 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -350,6 +350,9 @@ ENDPROC(ftrace_stub) .align 5 ENTRY(vector_swi) +#ifdef CONFIG_CPU_V7M + v7m_exception_entry +#else sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Calling r0 - r12 ARM( add r8, sp, #S_PC ) @@ -360,6 +363,7 @@ ENTRY(vector_swi) str lr, [sp, #S_PC] @ Save calling PC str r8, [sp, #S_PSR] @ Save CPSR str r0, [sp, #S_OLD_R0] @ Save OLD_R0 +#endif zero_fp #ifdef CONFIG_ALIGNMENT_TRAP diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 160f3376ba6..de23a9beed1 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -5,6 +5,7 @@ #include <asm/asm-offsets.h> #include <asm/errno.h> #include <asm/thread_info.h> +#include <asm/v7m.h> @ Bad Abort numbers @ ----------------- @@ -44,6 +45,116 @@ #endif .endm +#ifdef CONFIG_CPU_V7M +/* + * ARMv7-M exception entry/exit macros. + * + * xPSR, ReturnAddress(), LR (R14), R12, R3, R2, R1, and R0 are + * automatically saved on the current stack (32 words) before + * switching to the exception stack (SP_main). + * + * If exception is taken while in user mode, SP_main is + * empty. Otherwise, SP_main is aligned to 64 bit automatically + * (CCR.STKALIGN set). + * + * Linux assumes that the interrupts are disabled when entering an + * exception handler and it may BUG if this is not the case. Interrupts + * are disabled during entry and reenabled in the exit macro. + * + * v7m_exception_slow_exit is used when returning from SVC or PendSV. + * When returning to kernel mode, we don't return from exception. + */ + .macro v7m_exception_entry + @ determine the location of the registers saved by the core during + @ exception entry. Depending on the mode the cpu was in when the + @ exception happend that is either on the main or the process stack. + @ Bit 2 of EXC_RETURN stored in the lr register specifies which stack + @ was used. + tst lr, #EXC_RET_STACK_MASK + mrsne r12, psp + moveq r12, sp + + @ we cannot rely on r0-r3 and r12 matching the value saved in the + @ exception frame because of tail-chaining. So these have to be + @ reloaded. + ldmia r12!, {r0-r3} + + @ Linux expects to have irqs off. Do it here before taking stack space + cpsid i + + sub sp, #S_FRAME_SIZE-S_IP + stmdb sp!, {r0-r11} + + @ load saved r12, lr, return address and xPSR. + @ r0-r7 are used for signals and never touched from now on. Clobbering + @ r8-r12 is OK. + mov r9, r12 + ldmia r9!, {r8, r10-r12} + + @ calculate the original stack pointer value. + @ r9 currently points to the memory location just above the auto saved + @ xPSR. + @ The cpu might automatically 8-byte align the stack. Bit 9 + @ of the saved xPSR specifies if stack aligning took place. In this case + @ another 32-bit value is included in the stack. + + tst r12, V7M_xPSR_FRAMEPTRALIGN + addne r9, r9, #4 + + @ store saved r12 using str to have a register to hold the base for stm + str r8, [sp, #S_IP] + add r8, sp, #S_SP + @ store r13-r15, xPSR + stmia r8!, {r9-r12} + @ store old_r0 + str r0, [r8] + .endm + + /* + * PENDSV and SVCALL are configured to have the same exception + * priorities. As a kernel thread runs at SVCALL execution priority it + * can never be preempted and so we will never have to return to a + * kernel thread here. + */ + .macro v7m_exception_slow_exit ret_r0 + cpsid i + ldr lr, =EXC_RET_THREADMODE_PROCESSSTACK + + @ read original r12, sp, lr, pc and xPSR + add r12, sp, #S_IP + ldmia r12, {r1-r5} + + @ an exception frame is always 8-byte aligned. To tell the hardware if + @ the sp to be restored is aligned or not set bit 9 of the saved xPSR + @ accordingly. + tst r2, #4 + subne r2, r2, #4 + orrne r5, V7M_xPSR_FRAMEPTRALIGN + biceq r5, V7M_xPSR_FRAMEPTRALIGN + + @ write basic exception frame + stmdb r2!, {r1, r3-r5} + ldmia sp, {r1, r3-r5} + .if \ret_r0 + stmdb r2!, {r0, r3-r5} + .else + stmdb r2!, {r1, r3-r5} + .endif + + @ restore process sp + msr psp, r2 + + @ restore original r4-r11 + ldmia sp!, {r0-r11} + + @ restore main sp + add sp, sp, #S_FRAME_SIZE-S_IP + + cpsie i + bx lr + .endm +#endif /* CONFIG_CPU_V7M */ + @ @ Store/load the USER SP and LR registers by switching to the SYS @ mode. Useful in Thumb-2 mode where "stm/ldm rd, {sp, lr}^" is not @@ -165,6 +276,18 @@ rfeia sp! .endm +#ifdef CONFIG_CPU_V7M + /* + * Note we don't need to do clrex here as clearing the local monitor is + * part of each exception entry and exit sequence. + */ + .macro restore_user_regs, fast = 0, offset = 0 + .if \offset + add sp, #\offset + .endif + v7m_exception_slow_exit ret_r0 = \fast + .endm +#else /* ifdef CONFIG_CPU_V7M */ .macro restore_user_regs, fast = 0, offset = 0 clrex @ clear the exclusive monitor mov r2, sp @@ -181,6 +304,7 @@ add sp, sp, #S_FRAME_SIZE - S_SP movs pc, lr @ return & move spsr_svc into cpsr .endm +#endif /* ifdef CONFIG_CPU_V7M / else */ .macro get_thread_info, rd mov \rd, sp diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S new file mode 100644 index 00000000000..e00621f1403 --- /dev/null +++ b/arch/arm/kernel/entry-v7m.S @@ -0,0 +1,143 @@ +/* + * linux/arch/arm/kernel/entry-v7m.S + * + * Copyright (C) 2008 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Low-level vector interface routines for the ARMv7-M architecture + */ +#include <asm/memory.h> +#include <asm/glue.h> +#include <asm/thread_notify.h> +#include <asm/v7m.h> + +#include <mach/entry-macro.S> + +#include "entry-header.S" + +#ifdef CONFIG_TRACE_IRQFLAGS +#error "CONFIG_TRACE_IRQFLAGS not supported on the current ARMv7M implementation" +#endif + +__invalid_entry: + v7m_exception_entry + adr r0, strerr + mrs r1, ipsr + mov r2, lr + bl printk + mov r0, sp + bl show_regs +1: b 1b +ENDPROC(__invalid_entry) + +strerr: .asciz "\nUnhandled exception: IPSR = %08lx LR = %08lx\n" + + .align 2 +__irq_entry: + v7m_exception_entry + + @ + @ Invoke the IRQ handler + @ + mrs r0, ipsr + ldr r1, =V7M_xPSR_EXCEPTIONNO + and r0, r1 + sub r0, #16 + mov r1, sp + stmdb sp!, {lr} + @ routine called with r0 = irq number, r1 = struct pt_regs * + bl nvic_do_IRQ + + pop {lr} + @ + @ Check for any pending work if returning to user + @ + ldr r1, =BASEADDR_V7M_SCB + ldr r0, [r1, V7M_SCB_ICSR] + tst r0, V7M_SCB_ICSR_RETTOBASE + beq 2f + + get_thread_info tsk + ldr r2, [tsk, #TI_FLAGS] + tst r2, #_TIF_WORK_MASK + beq 2f @ no work pending + mov r0, #V7M_SCB_ICSR_PENDSVSET + str r0, [r1, V7M_SCB_ICSR] @ raise PendSV + +2: + @ registers r0-r3 and r12 are automatically restored on exception + @ return. r4-r7 were not clobbered in v7m_exception_entry so for + @ correctness they don't need to be restored. So only r8-r11 must be + @ restored here. The easiest way to do so is to restore r0-r7, too. + ldmia sp!, {r0-r11} + add sp, #S_FRAME_SIZE-S_IP + cpsie i + bx lr +ENDPROC(__irq_entry) + +__pendsv_entry: + v7m_exception_entry + + ldr r1, =BASEADDR_V7M_SCB + mov r0, #V7M_SCB_ICSR_PENDSVCLR + str r0, [r1, V7M_SCB_ICSR] @ clear PendSV + + @ execute the pending work, including reschedule + get_thread_info tsk + mov why, #0 + b ret_to_user +ENDPROC(__pendsv_entry) + +/* + * Register switch for ARMv7-M processors. + * r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info + * previous and next are guaranteed not to be the same. + */ +ENTRY(__switch_to) + .fnstart + .cantunwind + add ip, r1, #TI_CPU_SAVE + stmia ip!, {r4 - r11} @ Store most regs on stack + str sp, [ip], #4 + str lr, [ip], #4 + mov r5, r0 + add r4, r2, #TI_CPU_SAVE + ldr r0, =thread_notify_head + mov r1, #THREAD_NOTIFY_SWITCH + bl atomic_notifier_call_chain + mov ip, r4 + mov r0, r5 + ldmia ip!, {r4 - r11} @ Load all regs saved previously + ldr sp, [ip] + ldr pc, [ip, #4]! + .fnend +ENDPROC(__switch_to) + + .data + .align 8 +/* + * Vector table (64 words => 256 bytes natural alignment) + */ +ENTRY(vector_table) + .long 0 @ 0 - Reset stack pointer + .long __invalid_entry @ 1 - Reset + .long __invalid_entry @ 2 - NMI + .long __invalid_entry @ 3 - HardFault + .long __invalid_entry @ 4 - MemManage + .long __invalid_entry @ 5 - BusFault + .long __invalid_entry @ 6 - UsageFault + .long __invalid_entry @ 7 - Reserved + .long __invalid_entry @ 8 - Reserved + .long __invalid_entry @ 9 - Reserved + .long __invalid_entry @ 10 - Reserved + .long vector_swi @ 11 - SVCall + .long __invalid_entry @ 12 - Debug Monitor + .long __invalid_entry @ 13 - Reserved + .long __pendsv_entry @ 14 - PendSV + .long __invalid_entry @ 15 - SysTick + .rept 64 - 16 + .long __irq_entry @ 16..64 - External Interrupts + .endr diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 6a2e09c952c..75f14cc3e07 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -17,8 +17,12 @@ #include <asm/assembler.h> #include <asm/ptrace.h> #include <asm/asm-offsets.h> +#include <asm/memory.h> #include <asm/cp15.h> #include <asm/thread_info.h> +#include <asm/v7m.h> +#include <asm/mpu.h> +#include <asm/page.h> /* * Kernel startup entry point. @@ -50,21 +54,86 @@ ENTRY(stext) setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode @ and irqs disabled -#ifndef CONFIG_CPU_CP15 - ldr r9, =CONFIG_PROCESSOR_ID -#else +#if defined(CONFIG_CPU_CP15) mrc p15, 0, r9, c0, c0 @ get processor id +#elif defined(CONFIG_CPU_V7M) + ldr r9, =BASEADDR_V7M_SCB + ldr r9, [r9, V7M_SCB_CPUID] +#else + ldr r9, =CONFIG_PROCESSOR_ID #endif bl __lookup_processor_type @ r5=procinfo r9=cpuid movs r10, r5 @ invalid processor (r5=0)? beq __error_p @ yes, error 'p' - adr lr, BSYM(__after_proc_init) @ return (PIC) address +#ifdef CONFIG_ARM_MPU + /* Calculate the size of a region covering just the kernel */ + ldr r5, =PHYS_OFFSET @ Region start: PHYS_OFFSET + ldr r6, =(_end) @ Cover whole kernel + sub r6, r6, r5 @ Minimum size of region to map + clz r6, r6 @ Region size must be 2^N... + rsb r6, r6, #31 @ ...so round up region size + lsl r6, r6, #MPU_RSR_SZ @ Put size in right field + orr r6, r6, #(1 << MPU_RSR_EN) @ Set region enabled bit + bl __setup_mpu +#endif + ldr r13, =__mmap_switched @ address to jump to after + @ initialising sctlr + adr lr, BSYM(1f) @ return (PIC) address ARM( add pc, r10, #PROCINFO_INITFUNC ) THUMB( add r12, r10, #PROCINFO_INITFUNC ) THUMB( mov pc, r12 ) + 1: b __after_proc_init ENDPROC(stext) +#ifdef CONFIG_SMP + __CPUINIT +ENTRY(secondary_startup) + /* + * Common entry point for secondary CPUs. + * + * Ensure that we're in SVC mode, and IRQs are disabled. Lookup + * the processor type - there is no need to check the machine type + * as it has already been validated by the primary processor. + */ + setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 +#ifndef CONFIG_CPU_CP15 + ldr r9, =CONFIG_PROCESSOR_ID +#else + mrc p15, 0, r9, c0, c0 @ get processor id +#endif + bl __lookup_processor_type @ r5=procinfo r9=cpuid + movs r10, r5 @ invalid processor? + beq __error_p @ yes, error 'p' + + adr r4, __secondary_data + ldmia r4, {r7, r12} + +#ifdef CONFIG_ARM_MPU + /* Use MPU region info supplied by __cpu_up */ + ldr r6, [r7] @ get secondary_data.mpu_szr + bl __setup_mpu @ Initialize the MPU +#endif + + adr lr, BSYM(__after_proc_init) @ return address + mov r13, r12 @ __secondary_switched address + ARM( add pc, r10, #PROCINFO_INITFUNC ) + THUMB( add r12, r10, #PROCINFO_INITFUNC ) + THUMB( mov pc, r12 ) +ENDPROC(secondary_startup) + +ENTRY(__secondary_switched) + ldr sp, [r7, #8] @ set up the stack pointer + mov fp, #0 + b secondary_start_kernel +ENDPROC(__secondary_switched) + + .type __secondary_data, %object +__secondary_data: + .long secondary_data + .long __secondary_switched +#endif /* CONFIG_SMP */ + /* * Set the Control Register and Read the process ID. */ @@ -95,10 +164,97 @@ __after_proc_init: #endif mcr p15, 0, r0, c1, c0, 0 @ write control reg #endif /* CONFIG_CPU_CP15 */ - - b __mmap_switched @ clear the BSS and jump - @ to start_kernel + mov pc, r13 ENDPROC(__after_proc_init) .ltorg +#ifdef CONFIG_ARM_MPU + + +/* Set which MPU region should be programmed */ +.macro set_region_nr tmp, rgnr + mov \tmp, \rgnr @ Use static region numbers + mcr p15, 0, \tmp, c6, c2, 0 @ Write RGNR +.endm + +/* Setup a single MPU region, either D or I side (D-side for unified) */ +.macro setup_region bar, acr, sr, side = MPU_DATA_SIDE + mcr p15, 0, \bar, c6, c1, (0 + \side) @ I/DRBAR + mcr p15, 0, \acr, c6, c1, (4 + \side) @ I/DRACR + mcr p15, 0, \sr, c6, c1, (2 + \side) @ I/DRSR +.endm + +/* + * Setup the MPU and initial MPU Regions. We create the following regions: + * Region 0: Use this for probing the MPU details, so leave disabled. + * Region 1: Background region - covers the whole of RAM as strongly ordered + * Region 2: Normal, Shared, cacheable for RAM. From PHYS_OFFSET, size from r6 + * Region 3: Normal, shared, inaccessible from PL0 to protect the vectors page + * + * r6: Value to be written to DRSR (and IRSR if required) for MPU_RAM_REGION +*/ + +ENTRY(__setup_mpu) + + /* Probe for v7 PMSA compliance */ + mrc p15, 0, r0, c0, c1, 4 @ Read ID_MMFR0 + and r0, r0, #(MMFR0_PMSA) @ PMSA field + teq r0, #(MMFR0_PMSAv7) @ PMSA v7 + bne __error_p @ Fail: ARM_MPU on NOT v7 PMSA + + /* Determine whether the D/I-side memory map is unified. We set the + * flags here and continue to use them for the rest of this function */ + mrc p15, 0, r0, c0, c0, 4 @ MPUIR + ands r5, r0, #MPUIR_DREGION_SZMASK @ 0 size d region => No MPU + beq __error_p @ Fail: ARM_MPU and no MPU + tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified + + /* Setup second region first to free up r6 */ + set_region_nr r0, #MPU_RAM_REGION + isb + /* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */ + ldr r0, =PHYS_OFFSET @ RAM starts at PHYS_OFFSET + ldr r5,=(MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL) + + setup_region r0, r5, r6, MPU_DATA_SIDE @ PHYS_OFFSET, shared, enabled + beq 1f @ Memory-map not unified + setup_region r0, r5, r6, MPU_INSTR_SIDE @ PHYS_OFFSET, shared, enabled +1: isb + + /* First/background region */ + set_region_nr r0, #MPU_BG_REGION + isb + /* Execute Never, strongly ordered, inaccessible to PL0, rw PL1 */ + mov r0, #0 @ BG region starts at 0x0 + ldr r5,=(MPU_ACR_XN | MPU_RGN_STRONGLY_ORDERED | MPU_AP_PL1RW_PL0NA) + mov r6, #MPU_RSR_ALL_MEM @ 4GB region, enabled + + setup_region r0, r5, r6, MPU_DATA_SIDE @ 0x0, BG region, enabled + beq 2f @ Memory-map not unified + setup_region r0, r5, r6, MPU_INSTR_SIDE @ 0x0, BG region, enabled +2: isb + + /* Vectors region */ + set_region_nr r0, #MPU_VECTORS_REGION + isb + /* Shared, inaccessible to PL0, rw PL1 */ + mov r0, #CONFIG_VECTORS_BASE @ Cover from VECTORS_BASE + ldr r5,=(MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL) + /* Writing N to bits 5:1 (RSR_SZ) --> region size 2^N+1 */ + mov r6, #(((PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN) + + setup_region r0, r5, r6, MPU_DATA_SIDE @ VECTORS_BASE, PL0 NA, enabled + beq 3f @ Memory-map not unified + setup_region r0, r5, r6, MPU_INSTR_SIDE @ VECTORS_BASE, PL0 NA, enabled +3: isb + + /* Enable the MPU */ + mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR + bic r0, r0, #CR_BR @ Disable the 'default mem-map' + orr r0, r0, #CR_M @ Set SCTRL.M (MPU on) + mcr p15, 0, r0, c1, c0, 0 @ Enable MPU + isb + mov pc,lr +ENDPROC(__setup_mpu) +#endif #include "head-common.S" diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 8bac553fe21..45e8935cae4 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -156,7 +156,7 @@ ENDPROC(stext) * * Returns: * r0, r3, r5-r7 corrupted - * r4 = physical page table address + * r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h) */ __create_page_tables: pgtbl r4, r8 @ page table address @@ -331,6 +331,7 @@ __create_page_tables: #endif #ifdef CONFIG_ARM_LPAE sub r4, r4, #0x1000 @ point to the PGD table + mov r4, r4, lsr #ARCH_PGD_SHIFT #endif mov pc, lr ENDPROC(__create_page_tables) @@ -408,7 +409,7 @@ __secondary_data: * r0 = cp#15 control register * r1 = machine ID * r2 = atags or dtb pointer - * r4 = page table pointer + * r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h) * r9 = processor ID * r13 = *virtual* address to jump to upon completion */ @@ -427,10 +428,7 @@ __enable_mmu: #ifdef CONFIG_CPU_ICACHE_DISABLE bic r0, r0, #CR_I #endif -#ifdef CONFIG_ARM_LPAE - mov r5, #0 - mcrr p15, 0, r4, r5, c2 @ load TTBR0 -#else +#ifndef CONFIG_ARM_LPAE mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \ diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 1315c4ccfa5..4910232c483 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -153,6 +153,13 @@ THUMB( orr r7, #(1 << 30) ) @ HSCTLR.TE mrc p15, 4, r7, c14, c1, 0 @ CNTHCTL orr r7, r7, #3 @ PL1PCEN | PL1PCTEN mcr p15, 4, r7, c14, c1, 0 @ CNTHCTL + mov r7, #0 + mcrr p15, 4, r7, r7, c14 @ CNTVOFF + + @ Disable virtual timer in case it was counting + mrc p15, 0, r7, c14, c3, 1 @ CNTV_CTL + bic r7, #1 @ Clear ENABLE + mcr p15, 0, r7, c14, c3, 1 @ CNTV_CTL 1: #endif diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c index 36531643cc2..46931880093 100644 --- a/arch/arm/kernel/psci.c +++ b/arch/arm/kernel/psci.c @@ -158,7 +158,7 @@ static const struct of_device_id psci_of_match[] __initconst = { {}, }; -static int __init psci_init(void) +void __init psci_init(void) { struct device_node *np; const char *method; @@ -166,7 +166,7 @@ static int __init psci_init(void) np = of_find_matching_node(NULL, psci_of_match); if (!np) - return 0; + return; pr_info("probing function IDs from device-tree\n"); @@ -206,6 +206,5 @@ static int __init psci_init(void) out_put_node: of_node_put(np); - return 0; + return; } -early_initcall(psci_init); diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c new file mode 100644 index 00000000000..219f1d73572 --- /dev/null +++ b/arch/arm/kernel/psci_smp.c @@ -0,0 +1,84 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + * + * Author: Will Deacon <will.deacon@arm.com> + */ + +#include <linux/init.h> +#include <linux/irqchip/arm-gic.h> +#include <linux/smp.h> +#include <linux/of.h> + +#include <asm/psci.h> +#include <asm/smp_plat.h> + +/* + * psci_smp assumes that the following is true about PSCI: + * + * cpu_suspend Suspend the execution on a CPU + * @state we don't currently describe affinity levels, so just pass 0. + * @entry_point the first instruction to be executed on return + * returns 0 success, < 0 on failure + * + * cpu_off Power down a CPU + * @state we don't currently describe affinity levels, so just pass 0. + * no return on successful call + * + * cpu_on Power up a CPU + * @cpuid cpuid of target CPU, as from MPIDR + * @entry_point the first instruction to be executed on return + * returns 0 success, < 0 on failure + * + * migrate Migrate the context to a different CPU + * @cpuid cpuid of target CPU, as from MPIDR + * returns 0 success, < 0 on failure + * + */ + +extern void secondary_startup(void); + +static int __cpuinit psci_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + if (psci_ops.cpu_on) + return psci_ops.cpu_on(cpu_logical_map(cpu), + __pa(secondary_startup)); + return -ENODEV; +} + +#ifdef CONFIG_HOTPLUG_CPU +void __ref psci_cpu_die(unsigned int cpu) +{ + const struct psci_power_state ps = { + .type = PSCI_POWER_STATE_TYPE_POWER_DOWN, + }; + + if (psci_ops.cpu_off) + psci_ops.cpu_off(ps); + + /* We should never return */ + panic("psci: cpu %d failed to shutdown\n", cpu); +} +#endif + +bool __init psci_smp_available(void) +{ + /* is cpu_on available at least? */ + return (psci_ops.cpu_on != NULL); +} + +struct smp_operations __initdata psci_smp_ops = { + .smp_boot_secondary = psci_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = psci_cpu_die, +#endif +}; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 0cde326f554..9b653278c9e 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -37,6 +37,7 @@ #include <asm/cputype.h> #include <asm/elf.h> #include <asm/procinfo.h> +#include <asm/psci.h> #include <asm/sections.h> #include <asm/setup.h> #include <asm/smp_plat.h> @@ -128,7 +129,9 @@ struct stack { u32 und[3]; } ____cacheline_aligned; +#ifndef CONFIG_CPU_V7M static struct stack stacks[NR_CPUS]; +#endif char elf_platform[ELF_PLATFORM_SIZE]; EXPORT_SYMBOL(elf_platform); @@ -207,7 +210,7 @@ static const char *proc_arch[] = { "5TEJ", "6TEJ", "7", - "?(11)", + "7M", "?(12)", "?(13)", "?(14)", @@ -216,6 +219,12 @@ static const char *proc_arch[] = { "?(17)", }; +#ifdef CONFIG_CPU_V7M +static int __get_cpu_architecture(void) +{ + return CPU_ARCH_ARMv7M; +} +#else static int __get_cpu_architecture(void) { int cpu_arch; @@ -248,6 +257,7 @@ static int __get_cpu_architecture(void) return cpu_arch; } +#endif int __pure cpu_architecture(void) { @@ -293,7 +303,9 @@ static void __init cacheid_init(void) { unsigned int arch = cpu_architecture(); - if (arch >= CPU_ARCH_ARMv6) { + if (arch == CPU_ARCH_ARMv7M) { + cacheid = 0; + } else if (arch >= CPU_ARCH_ARMv6) { unsigned int cachetype = read_cpuid_cachetype(); if ((cachetype & (7 << 29)) == 4 << 29) { /* ARMv7 register format */ @@ -355,7 +367,7 @@ void __init early_print(const char *str, ...) static void __init cpuid_init_hwcaps(void) { - unsigned int divide_instrs; + unsigned int divide_instrs, vmsa; if (cpu_architecture() < CPU_ARCH_ARMv7) return; @@ -368,6 +380,11 @@ static void __init cpuid_init_hwcaps(void) case 1: elf_hwcap |= HWCAP_IDIVT; } + + /* LPAE implies atomic ldrd/strd instructions */ + vmsa = (read_cpuid_ext(CPUID_EXT_MMFR0) & 0xf) >> 0; + if (vmsa >= 5) + elf_hwcap |= HWCAP_LPAE; } static void __init feat_v6_fixup(void) @@ -392,6 +409,7 @@ static void __init feat_v6_fixup(void) */ void notrace cpu_init(void) { +#ifndef CONFIG_CPU_V7M unsigned int cpu = smp_processor_id(); struct stack *stk = &stacks[cpu]; @@ -442,6 +460,7 @@ void notrace cpu_init(void) "I" (offsetof(struct stack, und[0])), PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE) : "r14"); +#endif } u32 __cpu_logical_map[NR_CPUS] = { [0 ... NR_CPUS-1] = MPIDR_INVALID }; @@ -466,6 +485,72 @@ void __init smp_setup_processor_id(void) printk(KERN_INFO "Booting Linux on physical CPU 0x%x\n", mpidr); } +struct mpidr_hash mpidr_hash; +#ifdef CONFIG_SMP +/** + * smp_build_mpidr_hash - Pre-compute shifts required at each affinity + * level in order to build a linear index from an + * MPIDR value. Resulting algorithm is a collision + * free hash carried out through shifting and ORing + */ +static void __init smp_build_mpidr_hash(void) +{ + u32 i, affinity; + u32 fs[3], bits[3], ls, mask = 0; + /* + * Pre-scan the list of MPIDRS and filter out bits that do + * not contribute to affinity levels, ie they never toggle. + */ + for_each_possible_cpu(i) + mask |= (cpu_logical_map(i) ^ cpu_logical_map(0)); + pr_debug("mask of set bits 0x%x\n", mask); + /* + * Find and stash the last and first bit set at all affinity levels to + * check how many bits are required to represent them. + */ + for (i = 0; i < 3; i++) { + affinity = MPIDR_AFFINITY_LEVEL(mask, i); + /* + * Find the MSB bit and LSB bits position + * to determine how many bits are required + * to express the affinity level. + */ + ls = fls(affinity); + fs[i] = affinity ? ffs(affinity) - 1 : 0; + bits[i] = ls - fs[i]; + } + /* + * An index can be created from the MPIDR by isolating the + * significant bits at each affinity level and by shifting + * them in order to compress the 24 bits values space to a + * compressed set of values. This is equivalent to hashing + * the MPIDR through shifting and ORing. It is a collision free + * hash though not minimal since some levels might contain a number + * of CPUs that is not an exact power of 2 and their bit + * representation might contain holes, eg MPIDR[7:0] = {0x2, 0x80}. + */ + mpidr_hash.shift_aff[0] = fs[0]; + mpidr_hash.shift_aff[1] = MPIDR_LEVEL_BITS + fs[1] - bits[0]; + mpidr_hash.shift_aff[2] = 2*MPIDR_LEVEL_BITS + fs[2] - + (bits[1] + bits[0]); + mpidr_hash.mask = mask; + mpidr_hash.bits = bits[2] + bits[1] + bits[0]; + pr_debug("MPIDR hash: aff0[%u] aff1[%u] aff2[%u] mask[0x%x] bits[%u]\n", + mpidr_hash.shift_aff[0], + mpidr_hash.shift_aff[1], + mpidr_hash.shift_aff[2], + mpidr_hash.mask, + mpidr_hash.bits); + /* + * 4x is an arbitrary value used to warn on a hash table much bigger + * than expected on most systems. + */ + if (mpidr_hash_size() > 4 * num_possible_cpus()) + pr_warn("Large number of MPIDR hash buckets detected\n"); + sync_cache_w(&mpidr_hash); +} +#endif + static void __init setup_processor(void) { struct proc_info_list *list; @@ -803,10 +888,17 @@ void __init setup_arch(char **cmdline_p) unflatten_device_tree(); arm_dt_init_cpu_maps(); + psci_init(); #ifdef CONFIG_SMP if (is_smp()) { - smp_set_ops(mdesc->smp); + if (!mdesc->smp_init || !mdesc->smp_init()) { + if (psci_smp_available()) + smp_set_ops(&psci_smp_ops); + else if (mdesc->smp) + smp_set_ops(mdesc->smp); + } smp_init_cpus(); + smp_build_mpidr_hash(); } #endif @@ -879,6 +971,7 @@ static const char *hwcap_str[] = { "vfpv4", "idiva", "idivt", + "lpae", NULL }; diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 296786bdbb7..1c16c35c271 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -392,14 +392,19 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig, if (ksig->ka.sa.sa_flags & SA_SIGINFO) idx += 3; + /* + * Put the sigreturn code on the stack no matter which return + * mechanism we use in order to remain ABI compliant + */ if (__put_user(sigreturn_codes[idx], rc) || __put_user(sigreturn_codes[idx+1], rc+1)) return 1; - if (cpsr & MODE32_BIT) { + if ((cpsr & MODE32_BIT) && !IS_ENABLED(CONFIG_ARM_MPU)) { /* * 32-bit code can use the new high-page - * signal return code support. + * signal return code support except when the MPU has + * protected the vectors page from PL0 */ retcode = KERN_SIGRETURN_CODE + (idx << 2) + thumb; } else { diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 987dcf33415..db1536b8b30 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -7,6 +7,49 @@ .text /* + * Implementation of MPIDR hash algorithm through shifting + * and OR'ing. + * + * @dst: register containing hash result + * @rs0: register containing affinity level 0 bit shift + * @rs1: register containing affinity level 1 bit shift + * @rs2: register containing affinity level 2 bit shift + * @mpidr: register containing MPIDR value + * @mask: register containing MPIDR mask + * + * Pseudo C-code: + * + *u32 dst; + * + *compute_mpidr_hash(u32 rs0, u32 rs1, u32 rs2, u32 mpidr, u32 mask) { + * u32 aff0, aff1, aff2; + * u32 mpidr_masked = mpidr & mask; + * aff0 = mpidr_masked & 0xff; + * aff1 = mpidr_masked & 0xff00; + * aff2 = mpidr_masked & 0xff0000; + * dst = (aff0 >> rs0 | aff1 >> rs1 | aff2 >> rs2); + *} + * Input registers: rs0, rs1, rs2, mpidr, mask + * Output register: dst + * Note: input and output registers must be disjoint register sets + (eg: a macro instance with mpidr = r1 and dst = r1 is invalid) + */ + .macro compute_mpidr_hash dst, rs0, rs1, rs2, mpidr, mask + and \mpidr, \mpidr, \mask @ mask out MPIDR bits + and \dst, \mpidr, #0xff @ mask=aff0 + ARM( mov \dst, \dst, lsr \rs0 ) @ dst=aff0>>rs0 + THUMB( lsr \dst, \dst, \rs0 ) + and \mask, \mpidr, #0xff00 @ mask = aff1 + ARM( orr \dst, \dst, \mask, lsr \rs1 ) @ dst|=(aff1>>rs1) + THUMB( lsr \mask, \mask, \rs1 ) + THUMB( orr \dst, \dst, \mask ) + and \mask, \mpidr, #0xff0000 @ mask = aff2 + ARM( orr \dst, \dst, \mask, lsr \rs2 ) @ dst|=(aff2>>rs2) + THUMB( lsr \mask, \mask, \rs2 ) + THUMB( orr \dst, \dst, \mask ) + .endm + +/* * Save CPU state for a suspend. This saves the CPU general purpose * registers, and allocates space on the kernel stack to save the CPU * specific registers and some other data for resume. @@ -29,12 +72,18 @@ ENTRY(__cpu_suspend) mov r1, r4 @ size of save block mov r2, r5 @ virtual SP ldr r3, =sleep_save_sp -#ifdef CONFIG_SMP - ALT_SMP(mrc p15, 0, lr, c0, c0, 5) - ALT_UP(mov lr, #0) - and lr, lr, #15 + ldr r3, [r3, #SLEEP_SAVE_SP_VIRT] + ALT_SMP(mrc p15, 0, r9, c0, c0, 5) + ALT_UP_B(1f) + ldr r8, =mpidr_hash + /* + * This ldmia relies on the memory layout of the mpidr_hash + * struct mpidr_hash. + */ + ldmia r8, {r4-r7} @ r4 = mpidr mask (r5,r6,r7) = l[0,1,2] shifts + compute_mpidr_hash lr, r5, r6, r7, r9, r4 add r3, r3, lr, lsl #2 -#endif +1: bl __cpu_suspend_save adr lr, BSYM(cpu_suspend_abort) ldmfd sp!, {r0, pc} @ call suspend fn @@ -81,15 +130,23 @@ ENDPROC(cpu_resume_after_mmu) .data .align ENTRY(cpu_resume) -#ifdef CONFIG_SMP - adr r0, sleep_save_sp - ALT_SMP(mrc p15, 0, r1, c0, c0, 5) - ALT_UP(mov r1, #0) - and r1, r1, #15 - ldr r0, [r0, r1, lsl #2] @ stack phys addr -#else - ldr r0, sleep_save_sp @ stack phys addr -#endif + mov r1, #0 + ALT_SMP(mrc p15, 0, r0, c0, c0, 5) + ALT_UP_B(1f) + adr r2, mpidr_hash_ptr + ldr r3, [r2] + add r2, r2, r3 @ r2 = struct mpidr_hash phys address + /* + * This ldmia relies on the memory layout of the mpidr_hash + * struct mpidr_hash. + */ + ldmia r2, { r3-r6 } @ r3 = mpidr mask (r4,r5,r6) = l[0,1,2] shifts + compute_mpidr_hash r1, r4, r5, r6, r0, r3 +1: + adr r0, _sleep_save_sp + ldr r0, [r0, #SLEEP_SAVE_SP_PHYS] + ldr r0, [r0, r1, lsl #2] + setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off @ load phys pgd, stack, resume fn ARM( ldmia r0!, {r1, sp, pc} ) @@ -98,7 +155,11 @@ THUMB( mov sp, r2 ) THUMB( bx r3 ) ENDPROC(cpu_resume) -sleep_save_sp: - .rept CONFIG_NR_CPUS - .long 0 @ preserve stack phys ptr here - .endr + .align 2 +mpidr_hash_ptr: + .long mpidr_hash - . @ mpidr_hash struct offset + + .type sleep_save_sp, #object +ENTRY(sleep_save_sp) +_sleep_save_sp: + .space SLEEP_SAVE_SP_SZ @ struct sleep_save_sp diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 5919eb451bb..c5fb5469054 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -45,6 +45,7 @@ #include <asm/smp_plat.h> #include <asm/virt.h> #include <asm/mach/arch.h> +#include <asm/mpu.h> /* * as from 2.5, kernels no longer have an init_tasks structure @@ -78,6 +79,13 @@ void __init smp_set_ops(struct smp_operations *ops) smp_ops = *ops; }; +static unsigned long get_arch_pgd(pgd_t *pgd) +{ + phys_addr_t pgdir = virt_to_phys(pgd); + BUG_ON(pgdir & ARCH_PGD_MASK); + return pgdir >> ARCH_PGD_SHIFT; +} + int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle) { int ret; @@ -87,8 +95,14 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle) * its stack and the page tables. */ secondary_data.stack = task_stack_page(idle) + THREAD_START_SP; - secondary_data.pgdir = virt_to_phys(idmap_pgd); - secondary_data.swapper_pg_dir = virt_to_phys(swapper_pg_dir); +#ifdef CONFIG_ARM_MPU + secondary_data.mpu_rgn_szr = mpu_rgn_info.rgns[MPU_RAM_REGION].drsr; +#endif + +#ifdef CONFIG_MMU + secondary_data.pgdir = get_arch_pgd(idmap_pgd); + secondary_data.swapper_pg_dir = get_arch_pgd(swapper_pg_dir); +#endif __cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data)); outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1)); @@ -112,9 +126,8 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle) pr_err("CPU%u: failed to boot: %d\n", cpu, ret); } - secondary_data.stack = NULL; - secondary_data.pgdir = 0; + memset(&secondary_data, 0, sizeof(secondary_data)); return ret; } diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c index c59c97ea826..41cf3cbf756 100644 --- a/arch/arm/kernel/suspend.c +++ b/arch/arm/kernel/suspend.c @@ -1,15 +1,54 @@ #include <linux/init.h> +#include <linux/slab.h> +#include <asm/cacheflush.h> #include <asm/idmap.h> #include <asm/pgalloc.h> #include <asm/pgtable.h> #include <asm/memory.h> +#include <asm/smp_plat.h> #include <asm/suspend.h> #include <asm/tlbflush.h> extern int __cpu_suspend(unsigned long, int (*)(unsigned long)); extern void cpu_resume_mmu(void); +#ifdef CONFIG_MMU +/* + * Hide the first two arguments to __cpu_suspend - these are an implementation + * detail which platform code shouldn't have to know about. + */ +int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) +{ + struct mm_struct *mm = current->active_mm; + int ret; + + if (!idmap_pgd) + return -EINVAL; + + /* + * Provide a temporary page table with an identity mapping for + * the MMU-enable code, required for resuming. On successful + * resume (indicated by a zero return code), we need to switch + * back to the correct page tables. + */ + ret = __cpu_suspend(arg, fn); + if (ret == 0) { + cpu_switch_mm(mm->pgd, mm); + local_flush_bp_all(); + local_flush_tlb_all(); + } + + return ret; +} +#else +int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) +{ + return __cpu_suspend(arg, fn); +} +#define idmap_pgd NULL +#endif + /* * This is called by __cpu_suspend() to save the state, and do whatever * flushing is required to ensure that when the CPU goes to sleep we have @@ -47,30 +86,19 @@ void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr) virt_to_phys(save_ptr) + sizeof(*save_ptr)); } -/* - * Hide the first two arguments to __cpu_suspend - these are an implementation - * detail which platform code shouldn't have to know about. - */ -int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) -{ - struct mm_struct *mm = current->active_mm; - int ret; - - if (!idmap_pgd) - return -EINVAL; +extern struct sleep_save_sp sleep_save_sp; - /* - * Provide a temporary page table with an identity mapping for - * the MMU-enable code, required for resuming. On successful - * resume (indicated by a zero return code), we need to switch - * back to the correct page tables. - */ - ret = __cpu_suspend(arg, fn); - if (ret == 0) { - cpu_switch_mm(mm->pgd, mm); - local_flush_bp_all(); - local_flush_tlb_all(); - } +static int cpu_suspend_alloc_sp(void) +{ + void *ctx_ptr; + /* ctx_ptr is an array of physical addresses */ + ctx_ptr = kcalloc(mpidr_hash_size(), sizeof(u32), GFP_KERNEL); - return ret; + if (WARN_ON(!ctx_ptr)) + return -ENOMEM; + sleep_save_sp.save_ptr_stash = ctx_ptr; + sleep_save_sp.save_ptr_stash_phys = virt_to_phys(ctx_ptr); + sync_cache_w(&sleep_save_sp); + return 0; } +early_initcall(cpu_suspend_alloc_sp); diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 517bfd4da1c..cab094c234e 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -812,6 +812,7 @@ static void __init kuser_get_tls_init(unsigned long vectors) void __init early_trap_init(void *vectors_base) { +#ifndef CONFIG_CPU_V7M unsigned long vectors = (unsigned long)vectors_base; extern char __stubs_start[], __stubs_end[]; extern char __vectors_start[], __vectors_end[]; @@ -843,4 +844,11 @@ void __init early_trap_init(void *vectors_base) flush_icache_range(vectors, vectors + PAGE_SIZE); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); +#else /* ifndef CONFIG_CPU_V7M */ + /* + * on V7-M there is no need to copy the vector table to a dedicated + * memory area. The address is configurable and so a table in the kernel + * image can be used. + */ +#endif } |