1 files changed, 40 insertions, 1 deletions

diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index 73376170fb9..17fae4a42ab 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -222,6 +222,25 @@ static struct clk *periph_clocks[] __initdata = {
 	// irq0 .. irq1
 };
 
+static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+};
+
 /*
  * The four programmable clocks.
  * You must configure pin multiplexing to bring these signals out.
@@ -258,12 +277,29 @@ static void __init at91cap9_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 	clk_register(&pck2);
 	clk_register(&pck3);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91cap9_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
@@ -303,11 +339,14 @@ static void at91cap9_poweroff(void)
  *  AT91CAP9 processor initialization
  * -------------------------------------------------------------------- */
 
-void __init at91cap9_initialize(unsigned long main_clock)
+void __init at91cap9_map_io(void)
 {
 	/* Map peripherals */
 	iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
+}
 
+void __init at91cap9_initialize(unsigned long main_clock)
+{
 	at91_arch_reset = at91cap9_reset;
 	pm_power_off = at91cap9_poweroff;
 	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);