diff options
Diffstat (limited to 'arch/arm/mach-at91/at91cap9_devices.c')
| -rw-r--r-- | arch/arm/mach-at91/at91cap9_devices.c | 36 |
1 files changed, 17 insertions, 19 deletions
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index 5ebd4273d35..9eca2209cde 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -13,6 +13,7 @@ */ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/irq.h> #include <linux/dma-mapping.h> #include <linux/platform_device.h> @@ -21,6 +22,7 @@ #include <video/atmel_lcdc.h> #include <mach/board.h> +#include <mach/cpu.h> #include <mach/gpio.h> #include <mach/at91cap9.h> #include <mach/at91cap9_matrix.h> @@ -69,6 +71,9 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) if (!data) return; + if (cpu_is_at91cap9_revB()) + set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH); + /* Enable VBus control for UHP ports */ for (i = 0; i < data->ports; i++) { if (data->vbus_pin[i]) @@ -151,8 +156,13 @@ static struct platform_device at91_usba_udc_device = { void __init at91_add_device_usba(struct usba_platform_data *data) { - at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS | - AT91_MATRIX_UDPHS_BYPASS_LOCK); + if (cpu_is_at91cap9_revB()) { + set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH); + at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS | + AT91_MATRIX_UDPHS_BYPASS_LOCK); + } + else + at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS); /* * Invalid pins are 0 on AT91, but the usba driver is shared @@ -406,28 +416,13 @@ static struct platform_device at91cap9_nand_device = { void __init at91_add_device_nand(struct atmel_nand_data *data) { - unsigned long csa, mode; + unsigned long csa; if (!data) return; csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); - - /* set the bus interface characteristics */ - at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1) - | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1)); - - at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6) - | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6)); - - at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8)); - - if (data->bus_width_16) - mode = AT91_SMC_DBW_16; - else - mode = AT91_SMC_DBW_8; - at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1)); + at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); /* enable pin */ if (data->enable_pin) @@ -865,6 +860,9 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) if (!data) return; + if (cpu_is_at91cap9_revB()) + set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH); + at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ |