diff options
Diffstat (limited to 'arch/arm/mach-at91/at91sam9263_devices.c')
-rw-r--r-- | arch/arm/mach-at91/at91sam9263_devices.c | 80 |
1 files changed, 66 insertions, 14 deletions
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 7b46b278702..53688c46f95 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -23,6 +23,7 @@ #include <mach/board.h> #include <mach/at91sam9263.h> #include <mach/at91sam9263_matrix.h> +#include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> #include "generic.h" @@ -92,7 +93,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { @@ -355,8 +356,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * Compact Flash (PCMCIA or IDE) * -------------------------------------------------------------------- */ -#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \ - defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) +#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ + defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) static struct at91_cf_data cf0_data; @@ -409,7 +410,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) * we assume SMC timings are configured by board code, * except True IDE where timings are controlled by driver */ - ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA); + ebi0_csa = at91_matrix_read(AT91_MATRIX_EBI0CSA); switch (data->chipselect) { case 4: at91_set_A_periph(AT91_PIN_PD6, 0); /* EBI0_NCS4/CFCS0 */ @@ -428,7 +429,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) data->chipselect); return; } - at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa); + at91_matrix_write(AT91_MATRIX_EBI0CSA, ebi0_csa); if (gpio_is_valid(data->det_pin)) { at91_set_gpio_input(data->det_pin, 1); @@ -450,7 +451,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */ at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */ - pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf"; + pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf"; platform_device_register(pdev); } #else @@ -496,8 +497,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) if (!data) return; - csa = at91_sys_read(AT91_MATRIX_EBI0CSA); - at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); + csa = at91_matrix_read(AT91_MATRIX_EBI0CSA); + at91_matrix_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); /* enable pin */ if (gpio_is_valid(data->enable_pin)) @@ -891,7 +892,8 @@ static struct platform_device at91sam9263_isi_device = { .num_resources = ARRAY_SIZE(isi_resources), }; -void __init at91_add_device_isi(void) +void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck) { at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */ at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */ @@ -904,14 +906,20 @@ void __init at91_add_device_isi(void) at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */ at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */ at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */ - at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */ at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */ at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */ at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */ at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */ + + if (use_pck_as_mck) { + at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */ + + /* TODO: register the PCK for ISI_MCK and set its parent */ + } } #else -void __init at91_add_device_isi(void) {} +void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck) {} #endif @@ -959,6 +967,8 @@ static struct resource rtt0_resources[] = { .start = AT91SAM9263_BASE_RTT0, .end = AT91SAM9263_BASE_RTT0 + SZ_16 - 1, .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_MEM, } }; @@ -966,7 +976,6 @@ static struct platform_device at91sam9263_rtt0_device = { .name = "at91_rtt", .id = 0, .resource = rtt0_resources, - .num_resources = ARRAY_SIZE(rtt0_resources), }; static struct resource rtt1_resources[] = { @@ -974,6 +983,8 @@ static struct resource rtt1_resources[] = { .start = AT91SAM9263_BASE_RTT1, .end = AT91SAM9263_BASE_RTT1 + SZ_16 - 1, .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_MEM, } }; @@ -981,11 +992,53 @@ static struct platform_device at91sam9263_rtt1_device = { .name = "at91_rtt", .id = 1, .resource = rtt1_resources, - .num_resources = ARRAY_SIZE(rtt1_resources), }; +#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) +static void __init at91_add_device_rtt_rtc(void) +{ + struct platform_device *pdev; + struct resource *r; + + switch (CONFIG_RTC_DRV_AT91SAM9_RTT) { + case 0: + /* + * The second resource is needed only for the chosen RTT: + * GPBR will serve as the storage for RTC time offset + */ + at91sam9263_rtt0_device.num_resources = 2; + at91sam9263_rtt1_device.num_resources = 1; + pdev = &at91sam9263_rtt0_device; + r = rtt0_resources; + break; + case 1: + at91sam9263_rtt0_device.num_resources = 1; + at91sam9263_rtt1_device.num_resources = 2; + pdev = &at91sam9263_rtt1_device; + r = rtt1_resources; + break; + default: + pr_err("at91sam9263: only supports 2 RTT (%d)\n", + CONFIG_RTC_DRV_AT91SAM9_RTT); + return; + } + + pdev->name = "rtc-at91sam9"; + r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; + r[1].end = r[1].start + 3; +} +#else +static void __init at91_add_device_rtt_rtc(void) +{ + /* Only one resource is needed: RTT not used as RTC */ + at91sam9263_rtt0_device.num_resources = 1; + at91sam9263_rtt1_device.num_resources = 1; +} +#endif + static void __init at91_add_device_rtt(void) { + at91_add_device_rtt_rtc(); platform_device_register(&at91sam9263_rtt0_device); platform_device_register(&at91sam9263_rtt1_device); } @@ -1371,7 +1424,6 @@ static inline void configure_usart2_pins(unsigned pins) } static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { |