diff options
Diffstat (limited to 'arch/arm/mach-at91/board-at572d940hf_ek.c')
| -rw-r--r-- | arch/arm/mach-at91/board-at572d940hf_ek.c | 326 |
1 files changed, 0 insertions, 326 deletions
diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c deleted file mode 100644 index 3929f1c9e4e..00000000000 --- a/arch/arm/mach-at91/board-at572d940hf_ek.c +++ /dev/null @@ -1,326 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-at572d940hf_ek.c - * - * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/ds1305.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/board.h> -#include <mach/gpio.h> -#include <mach/at91sam9_smc.h> - -#include "sam9_smc.h" -#include "generic.h" - - -static void __init eb_map_io(void) -{ - /* Initialize processor: 12.500 MHz crystal */ - at572d940hf_initialize(12000000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx & Tx only) */ - at91_register_uart(AT572D940HF_ID_US0, 1, 0); - - /* USART1 on ttyS2. (Rx & Tx only) */ - at91_register_uart(AT572D940HF_ID_US1, 2, 0); - - /* USART2 on ttyS3. (Tx & Rx only */ - at91_register_uart(AT572D940HF_ID_US2, 3, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -static void __init eb_init_irq(void) -{ - at572d940hf_init_interrupts(NULL); -} - - -/* - * USB Host Port - */ -static struct at91_usbh_data __initdata eb_usbh_data = { - .ports = 2, -}; - - -/* - * USB Device Port - */ -static struct at91_udc_data __initdata eb_udc_data = { - .vbus_pin = 0, /* no VBUS detection,UDC always on */ - .pullup_pin = 0, /* pull-up driven by UDC */ -}; - - -/* - * MCI (SD/MMC) - */ -static struct at91_mmc_data __initdata eb_mmc_data = { - .wire4 = 1, -/* .det_pin = ... not connected */ -/* .wp_pin = ... not connected */ -/* .vcc_pin = ... not connected */ -}; - - -/* - * MACB Ethernet device - */ -static struct at91_eth_data __initdata eb_eth_data = { - .phy_irq_pin = AT91_PIN_PB25, - .is_rmii = 1, -}; - -/* - * NOR flash - */ - -static struct mtd_partition eb_nor_partitions[] = { - { - .name = "Raw Environment", - .offset = 0, - .size = SZ_4M, - .mask_flags = 0, - }, - { - .name = "OS FS", - .offset = MTDPART_OFS_APPEND, - .size = 3 * SZ_1M, - .mask_flags = 0, - }, - { - .name = "APP FS", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - }, -}; - -static void nor_flash_set_vpp(struct map_info* mi, int i) { -}; - -static struct physmap_flash_data nor_flash_data = { - .width = 4, - .parts = eb_nor_partitions, - .nr_parts = ARRAY_SIZE(eb_nor_partitions), - .set_vpp = nor_flash_set_vpp, -}; - -static struct resource nor_flash_resources[] = { - { - .start = AT91_CHIPSELECT_0, - .end = AT91_CHIPSELECT_0 + SZ_16M - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &nor_flash_data, - }, - .resource = nor_flash_resources, - .num_resources = ARRAY_SIZE(nor_flash_resources), -}; - -static struct sam9_smc_config __initdata eb_nor_smc_config = { - .ncs_read_setup = 1, - .nrd_setup = 1, - .ncs_write_setup = 1, - .nwe_setup = 1, - - .ncs_read_pulse = 7, - .nrd_pulse = 7, - .ncs_write_pulse = 7, - .nwe_pulse = 7, - - .read_cycle = 9, - .write_cycle = 9, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_32, - .tdf_cycles = 1, -}; - -static void __init eb_add_device_nor(void) -{ - /* configure chip-select 0 (NOR) */ - sam9_smc_configure(0, &eb_nor_smc_config); - platform_device_register(&nor_flash); -} - -/* - * NAND flash - */ -static struct mtd_partition __initdata eb_nand_partition[] = { - { - .name = "Partition 1", - .offset = 0, - .size = SZ_16M, - }, - { - .name = "Partition 2", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(eb_nand_partition); - return eb_nand_partition; -} - -static struct atmel_nand_data __initdata eb_nand_data = { - .ale = 22, - .cle = 21, -/* .det_pin = ... not connected */ -/* .rdy_pin = AT91_PIN_PC16, */ - .enable_pin = AT91_PIN_PA15, - .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif -}; - -static struct sam9_smc_config __initdata eb_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 0, - .ncs_write_setup = 1, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 12, -}; - -static void __init eb_add_device_nand(void) -{ - /* setup bus-width (8 or 16) */ - if (eb_nand_data.bus_width_16) - eb_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - eb_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &eb_nand_smc_config); - - at91_add_device_nand(&eb_nand_data); -} - - -/* - * SPI devices - */ -static struct resource rtc_resources[] = { - [0] = { - .start = AT572D940HF_ID_IRQ1, - .end = AT572D940HF_ID_IRQ1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct ds1305_platform_data ds1306_data = { - .is_ds1306 = true, - .en_1hz = false, -}; - -static struct spi_board_info eb_spi_devices[] = { - { /* RTC Dallas DS1306 */ - .modalias = "rtc-ds1305", - .chip_select = 3, - .mode = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA, - .max_speed_hz = 500000, - .bus_num = 0, - .irq = AT572D940HF_ID_IRQ1, - .platform_data = (void *) &ds1306_data, - }, -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* Dataflash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -}; - -static void __init eb_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&eb_usbh_data); - /* USB Device */ - at91_add_device_udc(&eb_udc_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* NOR */ - eb_add_device_nor(); - /* NAND */ - eb_add_device_nand(); - /* SPI */ - at91_add_device_spi(eb_spi_devices, ARRAY_SIZE(eb_spi_devices)); - /* MMC */ - at91_add_device_mmc(0, &eb_mmc_data); - /* Ethernet */ - at91_add_device_eth(&eb_eth_data); - /* mAgic */ - at91_add_device_mAgic(); -} - -MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB") - /* Maintainer: Atmel <costa.antonior@gmail.com> */ - .boot_params = AT91_SDRAM_BASE + 0x100, - .timer = &at91sam926x_timer, - .map_io = eb_map_io, - .init_irq = eb_init_irq, - .init_machine = eb_board_init, -MACHINE_END |