diff options
Diffstat (limited to 'arch/arm/mach-at91/board-cam60.c')
| -rw-r--r-- | arch/arm/mach-at91/board-cam60.c | 199 |
1 files changed, 0 insertions, 199 deletions
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c deleted file mode 100644 index ae827dd2d0d..00000000000 --- a/arch/arm/mach-at91/board-cam60.c +++ /dev/null @@ -1,199 +0,0 @@ -/* - * KwikByte CAM60 (KB9260) - * - * based on board-sam9260ek.c - * Copyright (C) 2005 SAN People - * Copyright (C) 2006 Atmel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/at91sam9_smc.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - - -static void __init cam60_init_early(void) -{ - /* Initialize processor: 10 MHz crystal */ - at91_initialize(10000000); -} - -/* - * USB Host - */ -static struct at91_usbh_data __initdata cam60_usbh_data = { - .ports = 1, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - - -/* - * SPI devices. - */ -#if defined(CONFIG_MTD_DATAFLASH) -static struct mtd_partition cam60_spi_partitions[] = { - { - .name = "BOOT1", - .offset = 0, - .size = 4 * 1056, - }, - { - .name = "BOOT2", - .offset = MTDPART_OFS_NXTBLK, - .size = 256 * 1056, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_NXTBLK, - .size = 2222 * 1056, - }, - { - .name = "file system", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct flash_platform_data cam60_spi_flash_platform_data = { - .name = "spi_flash", - .parts = cam60_spi_partitions, - .nr_parts = ARRAY_SIZE(cam60_spi_partitions) -}; -#endif - -static struct spi_board_info cam60_spi_devices[] __initdata = { -#if defined(CONFIG_MTD_DATAFLASH) - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - .platform_data = &cam60_spi_flash_platform_data - }, -#endif -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data cam60_macb_data __initdata = { - .phy_irq_pin = AT91_PIN_PB5, - .is_rmii = 0, -}; - - -/* - * NAND Flash - */ -static struct mtd_partition __initdata cam60_nand_partition[] = { - { - .name = "nand_fs", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata cam60_nand_data = { - .ale = 21, - .cle = 22, - .det_pin = -EINVAL, - .rdy_pin = AT91_PIN_PA9, - .enable_pin = AT91_PIN_PA7, - .ecc_mode = NAND_ECC_SOFT, - .parts = cam60_nand_partition, - .num_parts = ARRAY_SIZE(cam60_nand_partition), -}; - -static struct sam9_smc_config __initdata cam60_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 2, -}; - -static void __init cam60_add_device_nand(void) -{ - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &cam60_nand_smc_config); - - at91_add_device_nand(&cam60_nand_data); -} - - -static void __init cam60_board_init(void) -{ - at91_register_devices(); - - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - at91_add_device_serial(); - /* SPI */ - at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices)); - /* Ethernet */ - at91_add_device_eth(&cam60_macb_data); - /* USB Host */ - /* enable USB power supply circuit */ - at91_set_gpio_output(AT91_PIN_PB18, 1); - at91_add_device_usbh(&cam60_usbh_data); - /* NAND */ - cam60_add_device_nand(); -} - -MACHINE_START(CAM60, "KwikByte CAM60") - /* Maintainer: KwikByte */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = cam60_init_early, - .init_irq = at91_init_irq_default, - .init_machine = cam60_board_init, -MACHINE_END |