diff options
Diffstat (limited to 'arch/arm/mach-at91/board-cpu9krea.c')
| -rw-r--r-- | arch/arm/mach-at91/board-cpu9krea.c | 385 |
1 files changed, 385 insertions, 0 deletions
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c new file mode 100644 index 00000000000..4bc2e9f6ebb --- /dev/null +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -0,0 +1,385 @@ +/* + * linux/arch/arm/mach-at91/board-cpu9krea.c + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2006 Atmel + * Copyright (C) 2009 Eric Benard - eric@eukrea.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/mtd/physmap.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91sam9_smc.h> +#include <mach/at91sam9260_matrix.h> + +#include "sam9_smc.h" +#include "generic.h" + +static void __init cpu9krea_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91sam9260_initialize(18432000); + + /* DGBU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | + ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR | + ATMEL_UART_DCD | ATMEL_UART_RI); + + /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | + ATMEL_UART_RTS); + + /* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | + ATMEL_UART_RTS); + + /* USART3 on ttyS4. (Rx, Tx) */ + at91_register_uart(AT91SAM9260_ID_US3, 4, 0); + + /* USART4 on ttyS5. (Rx, Tx) */ + at91_register_uart(AT91SAM9260_ID_US4, 5, 0); + + /* USART5 on ttyS6. (Rx, Tx) */ + at91_register_uart(AT91SAM9260_ID_US5, 6, 0); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init cpu9krea_init_irq(void) +{ + at91sam9260_init_interrupts(NULL); +} + +/* + * USB Host port + */ +static struct at91_usbh_data __initdata cpu9krea_usbh_data = { + .ports = 2, +}; + +/* + * USB Device port + */ +static struct at91_udc_data __initdata cpu9krea_udc_data = { + .vbus_pin = AT91_PIN_PC8, + .pullup_pin = 0, /* pull-up driven by UDC */ +}; + +/* + * MACB Ethernet device + */ +static struct at91_eth_data __initdata cpu9krea_macb_data = { + .is_rmii = 1, +}; + +/* + * NAND flash + */ +static struct atmel_nand_data __initdata cpu9krea_nand_data = { + .ale = 21, + .cle = 22, + .rdy_pin = AT91_PIN_PC13, + .enable_pin = AT91_PIN_PC14, + .bus_width_16 = 0, +}; + +#ifdef CONFIG_MACH_CPU9260 +static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = { + .ncs_read_setup = 0, + .nrd_setup = 1, + .ncs_write_setup = 0, + .nwe_setup = 1, + + .ncs_read_pulse = 3, + .nrd_pulse = 3, + .ncs_write_pulse = 3, + .nwe_pulse = 3, + + .read_cycle = 5, + .write_cycle = 5, + + .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE + | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, + .tdf_cycles = 2, +}; +#else +static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = { + .ncs_read_setup = 0, + .nrd_setup = 2, + .ncs_write_setup = 0, + .nwe_setup = 2, + + .ncs_read_pulse = 4, + .nrd_pulse = 4, + .ncs_write_pulse = 4, + .nwe_pulse = 4, + + .read_cycle = 7, + .write_cycle = 7, + + .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE + | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, + .tdf_cycles = 3, +}; +#endif + +static void __init cpu9krea_add_device_nand(void) +{ + sam9_smc_configure(3, &cpu9krea_nand_smc_config); + at91_add_device_nand(&cpu9krea_nand_data); +} + +/* + * NOR flash + */ +static struct physmap_flash_data cpuat9260_nor_data = { + .width = 2, +}; + +#define NOR_BASE AT91_CHIPSELECT_0 +#define NOR_SIZE SZ_64M + +static struct resource nor_flash_resources[] = { + { + .start = NOR_BASE, + .end = NOR_BASE + NOR_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device cpu9krea_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &cpuat9260_nor_data, + }, + .resource = nor_flash_resources, + .num_resources = ARRAY_SIZE(nor_flash_resources), +}; + +#ifdef CONFIG_MACH_CPU9260 +static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = { + .ncs_read_setup = 0, + .nrd_setup = 1, + .ncs_write_setup = 0, + .nwe_setup = 1, + + .ncs_read_pulse = 10, + .nrd_pulse = 10, + .ncs_write_pulse = 6, + .nwe_pulse = 6, + + .read_cycle = 12, + .write_cycle = 8, + + .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE + | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE + | AT91_SMC_DBW_16, + .tdf_cycles = 2, +}; +#else +static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = { + .ncs_read_setup = 0, + .nrd_setup = 1, + .ncs_write_setup = 0, + .nwe_setup = 1, + + .ncs_read_pulse = 13, + .nrd_pulse = 13, + .ncs_write_pulse = 8, + .nwe_pulse = 8, + + .read_cycle = 15, + .write_cycle = 10, + + .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE + | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE + | AT91_SMC_DBW_16, + .tdf_cycles = 2, +}; +#endif + +static __init void cpu9krea_add_device_nor(void) +{ + unsigned long csa; + + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V); + + /* configure chip-select 0 (NOR) */ + sam9_smc_configure(0, &cpu9krea_nor_smc_config); + + platform_device_register(&cpu9krea_nor_flash); +} + +/* + * LEDs + */ +static struct gpio_led cpu9krea_leds[] = { + { /* LED1 */ + .name = "LED1", + .gpio = AT91_PIN_PC11, + .active_low = 1, + .default_trigger = "timer", + }, + { /* LED2 */ + .name = "LED2", + .gpio = AT91_PIN_PC12, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* LED3 */ + .name = "LED3", + .gpio = AT91_PIN_PC7, + .active_low = 1, + .default_trigger = "none", + }, + { /* LED4 */ + .name = "LED4", + .gpio = AT91_PIN_PC9, + .active_low = 1, + .default_trigger = "none", + } +}; + +static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = { + { + I2C_BOARD_INFO("rtc-ds1307", 0x68), + .type = "ds1339", + }, +}; + +/* + * GPIO Buttons + */ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button cpu9krea_buttons[] = { + { + .gpio = AT91_PIN_PC3, + .code = BTN_0, + .desc = "BP1", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PB20, + .code = BTN_1, + .desc = "BP2", + .active_low = 1, + .wakeup = 1, + } +}; + +static struct gpio_keys_platform_data cpu9krea_button_data = { + .buttons = cpu9krea_buttons, + .nbuttons = ARRAY_SIZE(cpu9krea_buttons), +}; + +static struct platform_device cpu9krea_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &cpu9krea_button_data, + } +}; + +static void __init cpu9krea_add_device_buttons(void) +{ + at91_set_gpio_input(AT91_PIN_PC3, 1); /* BP1 */ + at91_set_deglitch(AT91_PIN_PC3, 1); + at91_set_gpio_input(AT91_PIN_PB20, 1); /* BP2 */ + at91_set_deglitch(AT91_PIN_PB20, 1); + + platform_device_register(&cpu9krea_button_device); +} +#else +static void __init cpu9krea_add_device_buttons(void) +{ +} +#endif + +/* + * MCI (SD/MMC) + */ +static struct at91_mmc_data __initdata cpu9krea_mmc_data = { + .slot_b = 0, + .wire4 = 1, + .det_pin = AT91_PIN_PA29, +}; + +static void __init cpu9krea_board_init(void) +{ + /* NOR */ + cpu9krea_add_device_nor(); + /* Serial */ + at91_add_device_serial(); + /* USB Host */ + at91_add_device_usbh(&cpu9krea_usbh_data); + /* USB Device */ + at91_add_device_udc(&cpu9krea_udc_data); + /* NAND */ + cpu9krea_add_device_nand(); + /* Ethernet */ + at91_add_device_eth(&cpu9krea_macb_data); + /* MMC */ + at91_add_device_mmc(0, &cpu9krea_mmc_data); + /* I2C */ + at91_add_device_i2c(cpu9krea_i2c_devices, + ARRAY_SIZE(cpu9krea_i2c_devices)); + /* LEDs */ + at91_gpio_leds(cpu9krea_leds, ARRAY_SIZE(cpu9krea_leds)); + /* Push Buttons */ + cpu9krea_add_device_buttons(); +} + +#ifdef CONFIG_MACH_CPU9260 +MACHINE_START(CPUAT9260, "Eukrea CPU9260") +#else +MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") +#endif + /* Maintainer: Eric Benard - EUKREA Electromatique */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = cpu9krea_map_io, + .init_irq = cpu9krea_init_irq, + .init_machine = cpu9krea_board_init, +MACHINE_END |