diff options
Diffstat (limited to 'arch/arm/mach-at91/board-dk.c')
| -rw-r--r-- | arch/arm/mach-at91/board-dk.c | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c new file mode 100644 index 00000000000..7401dbe1b47 --- /dev/null +++ b/arch/arm/mach-at91/board-dk.c @@ -0,0 +1,216 @@ +/* + * linux/arch/arm/mach-at91/board-dk.c + * + * Copyright (C) 2005 SAN People + * + * Epson S1D framebuffer glue code is: + * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/mtd/physmap.h> + +#include <asm/hardware.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91rm9200_mc.h> + +#include "generic.h" + + +/* + * Serial port configuration. + * 0 .. 3 = USART0 .. USART3 + * 4 = DBGU + */ +static struct at91_uart_config __initdata dk_uart_config = { + .console_tty = 0, /* ttyS0 */ + .nr_tty = 2, + .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ +}; + +static void __init dk_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_BGA); + + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); + + /* Setup the serial ports and console */ + at91_init_serial(&dk_uart_config); +} + +static void __init dk_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + +static struct at91_eth_data __initdata dk_eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, +}; + +static struct at91_usbh_data __initdata dk_usbh_data = { + .ports = 2, +}; + +static struct at91_udc_data __initdata dk_udc_data = { + .vbus_pin = AT91_PIN_PD4, + .pullup_pin = AT91_PIN_PD5, +}; + +static struct at91_cf_data __initdata dk_cf_data = { + .det_pin = AT91_PIN_PB0, + .rst_pin = AT91_PIN_PC5, + // .irq_pin = ... not connected + // .vcc_pin = ... always powered +}; + +static struct at91_mmc_data __initdata dk_mmc_data = { + .slot_b = 0, + .wire4 = 1, +}; + +static struct spi_board_info dk_spi_devices[] = { + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 15 * 1000 * 1000, + }, + { /* UR6HCPS2-SP40 PS2-to-SPI adapter */ + .modalias = "ur6hcps2", + .chip_select = 1, + .max_speed_hz = 250 * 1000, + }, + { /* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */ + .modalias = "tlv1504", + .chip_select = 2, + .max_speed_hz = 20 * 1000 * 1000, + }, +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + { /* DataFlash card */ + .modalias = "mtd_dataflash", + .chip_select = 3, + .max_speed_hz = 15 * 1000 * 1000, + } +#endif +}; + +static struct mtd_partition __initdata dk_nand_partition[] = { + { + .name = "NAND Partition 1", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition *nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(dk_nand_partition); + return dk_nand_partition; +} + +static struct at91_nand_data __initdata dk_nand_data = { + .ale = 22, + .cle = 21, + .det_pin = AT91_PIN_PB1, + .rdy_pin = AT91_PIN_PC2, + // .enable_pin = ... not there + .partition_info = nand_partitions, +}; + +#define DK_FLASH_BASE AT91_CHIPSELECT_0 +#define DK_FLASH_SIZE 0x200000 + +static struct physmap_flash_data dk_flash_data = { + .width = 2, +}; + +static struct resource dk_flash_resource = { + .start = DK_FLASH_BASE, + .end = DK_FLASH_BASE + DK_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device dk_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &dk_flash_data, + }, + .resource = &dk_flash_resource, + .num_resources = 1, +}; + + +static void __init dk_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* Ethernet */ + at91_add_device_eth(&dk_eth_data); + /* USB Host */ + at91_add_device_usbh(&dk_usbh_data); + /* USB Device */ + at91_add_device_udc(&dk_udc_data); + at91_set_multi_drive(dk_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ + /* Compact Flash */ + at91_add_device_cf(&dk_cf_data); + /* I2C */ + at91_add_device_i2c(); + /* SPI */ + at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices)); +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + /* DataFlash card */ + at91_set_gpio_output(AT91_PIN_PB7, 0); +#else + /* MMC */ + at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ + at91_add_device_mmc(&dk_mmc_data); +#endif + /* NAND */ + at91_add_device_nand(&dk_nand_data); + /* NOR Flash */ + platform_device_register(&dk_flash); + /* VGA */ +// dk_add_device_video(); +} + +MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") + /* Maintainer: SAN People/Atmel */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = dk_map_io, + .init_irq = dk_init_irq, + .init_machine = dk_board_init, +MACHINE_END |