1 files changed, 0 insertions, 113 deletions
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
deleted file mode 100644
index 93b1df42f63..00000000000
--- a/arch/arm/mach-at91/board-kafa.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-kafa.c
- *
- *  Copyright (C) 2006 Sperry-Sun
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init kafa_init_early(void)
-{
-	/* Set cpu type: PQFP */
-	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata kafa_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC4,
-	.is_rmii	= 0,
-};
-
-static struct at91_usbh_data __initdata kafa_usbh_data = {
-	.ports		= 1,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata kafa_udc_data = {
-	.vbus_pin	= AT91_PIN_PB6,
-	.pullup_pin	= AT91_PIN_PB7,
-};
-
-/*
- * LEDs
- */
-static struct gpio_led kafa_leds[] = {
-	{	/* D1 */
-		.name			= "led1",
-		.gpio			= AT91_PIN_PB4,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",
-	},
-};
-
-static void __init kafa_board_init(void)
-{
-	/* Serial */
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&kafa_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&kafa_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&kafa_udc_data);
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* SPI */
-	at91_add_device_spi(NULL, 0);
-	/* LEDs */
-	at91_gpio_leds(kafa_leds, ARRAY_SIZE(kafa_leds));
-}
-
-MACHINE_START(KAFA, "Sperry-Sun KAFA")
-	/* Maintainer: Sergei Sharonov */
-	.init_time	= at91rm9200_timer_init,
-	.map_io		= at91_map_io,
-	.handle_irq	= at91_aic_handle_irq,
-	.init_early	= kafa_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= kafa_board_init,
-MACHINE_END