diff options
Diffstat (limited to 'arch/arm/mach-at91')
79 files changed, 24 insertions, 23297 deletions
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 0e6d548b70d..2395c68b3e3 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -15,27 +15,10 @@ config HAVE_AT91_DBGU1 config HAVE_AT91_DBGU2 bool -config AT91_USE_OLD_CLK - bool - -config AT91_PMC_UNIT - bool - default !ARCH_AT91X40 - config COMMON_CLK_AT91 bool - default AT91_PMC_UNIT && USE_OF && !AT91_USE_OLD_CLK select COMMON_CLK -config OLD_CLK_AT91 - bool - default AT91_PMC_UNIT && AT91_USE_OLD_CLK - -config OLD_IRQ_AT91 - bool - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - config HAVE_AT91_SMD bool @@ -44,20 +27,22 @@ config HAVE_AT91_H32MX config SOC_AT91SAM9 bool - select ATMEL_AIC_IRQ if !OLD_IRQ_AT91 + select ATMEL_AIC_IRQ + select COMMON_CLK_AT91 select CPU_ARM926T select GENERIC_CLOCKEVENTS - select MEMORY if USE_OF - select ATMEL_SDRAMC if USE_OF + select MEMORY + select ATMEL_SDRAMC config SOC_SAMA5 bool select ATMEL_AIC5_IRQ + select COMMON_CLK_AT91 select CPU_V7 select GENERIC_CLOCKEVENTS - select USE_OF select MEMORY select ATMEL_SDRAMC + select PHYLIB if NETDEVICES menu "Atmel AT91 System-on-Chip" @@ -65,16 +50,6 @@ choice prompt "Core type" -config ARCH_AT91X40 - bool "ARM7 AT91X40" - depends on !MMU - select CPU_ARM7TDMI - select ARCH_USES_GETTIMEOFFSET - select OLD_IRQ_AT91 - - help - Select this if you are using one of Atmel's AT91X40 SoC. - config SOC_SAM_V4_V5 bool "ARM9 AT91SAM9/AT91RM9200" help @@ -122,7 +97,8 @@ endif if SOC_SAM_V4_V5 config SOC_AT91RM9200 bool "AT91RM9200" - select ATMEL_AIC_IRQ if !OLD_IRQ_AT91 + select ATMEL_AIC_IRQ + select COMMON_CLK_AT91 select CPU_ARM920T select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 @@ -198,37 +174,11 @@ config SOC_AT91SAM9N12 # ---------------------------------------------------------- endif # SOC_SAM_V4_V5 - -if SOC_SAM_V4_V5 || ARCH_AT91X40 -source arch/arm/mach-at91/Kconfig.non_dt -endif - -comment "Generic Board Type" - config MACH_AT91RM9200_DT - bool "Atmel AT91RM9200 Evaluation Kits with device-tree support" - depends on SOC_AT91RM9200 - select USE_OF - help - Select this if you want to experiment device-tree with - an Atmel RM9200 Evaluation Kit. + def_bool SOC_AT91RM9200 config MACH_AT91SAM9_DT - bool "Atmel AT91SAM Evaluation Kits with device-tree support" - depends on SOC_AT91SAM9 - select USE_OF - help - Select this if you want to experiment device-tree with - an Atmel Evaluation Kit. - -config MACH_SAMA5_DT - bool "Atmel SAMA5 Evaluation Kits with device-tree support" - depends on SOC_SAMA5 - select USE_OF - select PHYLIB if NETDEVICES - help - Select this if you want to experiment device-tree with - an Atmel Evaluation Kit. + def_bool SOC_AT91SAM9 # ---------------------------------------------------------- @@ -251,7 +201,7 @@ config AT91_TIMER_HZ int "Kernel HZ (jiffies per second)" range 32 1024 depends on ARCH_AT91 - default "128" if ARCH_AT91RM9200 + default "128" if SOC_AT91RM9200 default "100" help On AT91rm9200 chips where you're using a system clock derived diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt deleted file mode 100644 index d8e88219edb..00000000000 --- a/arch/arm/mach-at91/Kconfig.non_dt +++ /dev/null @@ -1,344 +0,0 @@ -menu "Atmel Non-DT world" - -config HAVE_AT91_DATAFLASH_CARD - bool - -choice - prompt "Atmel AT91 Processor Devices for non DT boards" - depends on !ARCH_AT91X40 - -config ARCH_AT91_NONE - bool "None" - -config ARCH_AT91RM9200 - bool "AT91RM9200" - select SOC_AT91RM9200 - select AT91_USE_OLD_CLK - select OLD_IRQ_AT91 - -config ARCH_AT91SAM9260 - bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20" - select SOC_AT91SAM9260 - select AT91_USE_OLD_CLK - select OLD_IRQ_AT91 - -config ARCH_AT91SAM9261 - bool "AT91SAM9261 or AT91SAM9G10" - select SOC_AT91SAM9261 - select AT91_USE_OLD_CLK - select OLD_IRQ_AT91 - -config ARCH_AT91SAM9263 - bool "AT91SAM9263" - select SOC_AT91SAM9263 - select AT91_USE_OLD_CLK - select OLD_IRQ_AT91 - -config ARCH_AT91SAM9RL - bool "AT91SAM9RL" - select SOC_AT91SAM9RL - select AT91_USE_OLD_CLK - select OLD_IRQ_AT91 - -config ARCH_AT91SAM9G45 - bool "AT91SAM9G45" - select SOC_AT91SAM9G45 - select AT91_USE_OLD_CLK - select OLD_IRQ_AT91 - -endchoice - -config ARCH_AT91SAM9G20 - bool - select ARCH_AT91SAM9260 - -config ARCH_AT91SAM9G10 - bool - select ARCH_AT91SAM9261 - -# ---------------------------------------------------------- - -if ARCH_AT91RM9200 - -comment "AT91RM9200 Board Type" - -config MACH_ONEARM - bool "Ajeco 1ARM Single Board Computer" - help - Select this if you are using Ajeco's 1ARM Single Board Computer. - <http://www.ajeco.fi/> - -config MACH_AT91RM9200EK - bool "Atmel AT91RM9200-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507> - -config MACH_CSB337 - bool "Cogent CSB337" - help - Select this if you are using Cogent's CSB337 board. - <http://www.cogcomp.com/csb_csb337.htm> - -config MACH_CSB637 - bool "Cogent CSB637" - help - Select this if you are using Cogent's CSB637 board. - <http://www.cogcomp.com/csb_csb637.htm> - -config MACH_CARMEVA - bool "Conitec ARM&EVA" - help - Select this if you are using Conitec's AT91RM9200-MCU-Module. - <http://www.conitec.net/english/linuxboard.php> - -config MACH_ATEB9200 - bool "Embest ATEB9200" - help - Select this if you are using Embest's ATEB9200 board. - <http://www.embedinfo.com/english/product/ATEB9200.asp> - -config MACH_KB9200 - bool "KwikByte KB920x" - help - Select this if you are using KwikByte's KB920x board. - <http://www.kwikbyte.com/KB9202.html> - -config MACH_PICOTUX2XX - bool "picotux 200" - help - Select this if you are using a picotux 200. - <http://www.picotux.com/> - -config MACH_KAFA - bool "Sperry-Sun KAFA board" - help - Select this if you are using Sperry-Sun's KAFA board. - -config MACH_ECBAT91 - bool "emQbit ECB_AT91 SBC" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using emQbit's ECB_AT91 board. - <http://wiki.emqbit.com/free-ecb-at91> - -config MACH_YL9200 - bool "ucDragon YL-9200" - help - Select this if you are using the ucDragon YL-9200 board. - -config MACH_CPUAT91 - bool "Eukrea CPUAT91" - help - Select this if you are using the Eukrea Electromatique's - CPUAT91 board <http://www.eukrea.com/>. - -config MACH_ECO920 - bool "eco920" - help - Select this if you are using the eco920 board -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9260 - -comment "AT91SAM9260 Variants" - -comment "AT91SAM9260 / AT91SAM9XE Board Type" - -config MACH_AT91SAM9260EK - bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> - -config MACH_CAM60 - bool "KwikByte KB9260 (CAM60) board" - help - Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. - <http://www.kwikbyte.com/KB9260.html> - -config MACH_SAM9_L9260 - bool "Olimex SAM9-L9260 board" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. - <http://www.olimex.com/dev/sam9-L9260.html> - -config MACH_AFEB9260 - bool "Custom afeb9260 board v1" - help - Select this if you are using custom afeb9260 board based on - open hardware design. Select this for revision 1 of the board. - <svn://194.85.238.22/home/users/george/svn/arm9eb> - <http://groups.google.com/group/arm9fpga-evolution-board> - -config MACH_CPU9260 - bool "Eukrea CPU9260 board" - help - Select this if you are using a Eukrea Electromatique's - CPU9260 Board <http://www.eukrea.com/> - -config MACH_FLEXIBITY - bool "Flexibity Connect board" - help - Select this if you are using Flexibity Connect board - <http://www.flexibity.com> - -comment "AT91SAM9G20 Board Type" - -config MACH_AT91SAM9G20EK - bool "Atmel AT91SAM9G20-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit - that embeds only one SD/MMC slot. - -config MACH_AT91SAM9G20EK_2MMC - depends on MACH_AT91SAM9G20EK - bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" - help - Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit - with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and - onwards. - <http://www.atmel.com/tools/SAM9G20-EK.aspx> - -config MACH_CPU9G20 - bool "Eukrea CPU9G20 board" - help - Select this if you are using a Eukrea Electromatique's - CPU9G20 Board <http://www.eukrea.com/> - -config MACH_PORTUXG20 - bool "taskit PortuxG20" - help - Select this if you are using taskit's PortuxG20. - <http://www.taskit.de/en/> - -config MACH_STAMP9G20 - bool "taskit Stamp9G20 CPU module" - help - Select this if you are using taskit's Stamp9G20 CPU module on its - evaluation board. - <http://www.taskit.de/en/> - -config MACH_PCONTROL_G20 - bool "PControl G20 CPU module" - help - Select this if you are using taskit's Stamp9G20 CPU module on this - carrier board, being the decentralized unit of a building automation - system; featuring nvram, eth-switch, iso-rs485, display, io - -config MACH_GSIA18S - bool "GS_IA18_S board" - help - This enables support for the GS_IA18_S board - produced by GeoSIG Ltd company. This is an internet accelerograph. - <http://www.geosig.com> - -config MACH_SNAPPER_9260 - bool "Bluewater Systems Snapper 9260/9G20 module" - help - Select this if you are using the Bluewater Systems Snapper 9260 or - Snapper 9G20 modules. - <http://www.bluewatersys.com/> -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9261 - -comment "AT91SAM9261 Board Type" - -config MACH_AT91SAM9261EK - bool "Atmel AT91SAM9261-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> - -comment "AT91SAM9G10 Board Type" - -config MACH_AT91SAM9G10EK - bool "Atmel AT91SAM9G10-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9263 - -comment "AT91SAM9263 Board Type" - -config MACH_AT91SAM9263EK - bool "Atmel AT91SAM9263-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9RL - -comment "AT91SAM9RL Board Type" - -config MACH_AT91SAM9RLEK - bool "Atmel AT91SAM9RL-EK Evaluation Kit" - help - Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9G45 - -comment "AT91SAM9G45 Board Type" - -config MACH_AT91SAM9M10G45EK - bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" - help - Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit. - Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10 - families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11. - <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91X40 - -comment "AT91X40 Board Type" - -config MACH_AT91EB01 - bool "Atmel AT91EB01 Evaluation Kit" - help - Select this if you are using Atmel's AT91EB01 Evaluation Kit. - It is also a popular target for simulators such as GDB's - ARM simulator (commonly known as the ARMulator) and the - Skyeye simulator. - -endif - -# ---------------------------------------------------------- - -comment "AT91 Board Options" - -config MTD_AT91_DATAFLASH_CARD - bool "Enable DataFlash Card support" - depends on HAVE_AT91_DATAFLASH_CARD - help - Enable support for the DataFlash card. - -endmenu diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 1b9ae0257a6..7b6424d4076 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -2,10 +2,8 @@ # Makefile for the linux kernel. # -obj-y := gpio.o setup.o sysirq_mask.o +obj-y := setup.o sysirq_mask.o -obj-$(CONFIG_OLD_IRQ_AT91) += irq.o -obj-$(CONFIG_OLD_CLK_AT91) += clock.o obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o # CPU-specific support @@ -20,73 +18,12 @@ obj-$(CONFIG_SOC_AT91SAM9RL) += at91sam9rl.o obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o -obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o -obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o -obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o -obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263_devices.o -obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl_devices.o -obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45_devices.o -obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o - -# AT91RM9200 board-specific support -obj-$(CONFIG_MACH_ONEARM) += board-1arm.o -obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o -obj-$(CONFIG_MACH_CSB337) += board-csb337.o -obj-$(CONFIG_MACH_CSB637) += board-csb637.o -obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o -obj-$(CONFIG_MACH_KB9200) += board-kb9202.o -obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o -obj-$(CONFIG_MACH_KAFA) += board-kafa.o -obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o -obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o -obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o -obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o -obj-$(CONFIG_MACH_ECO920) += board-eco920.o - -# AT91SAM9260 board-specific support -obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o -obj-$(CONFIG_MACH_CAM60) += board-cam60.o -obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o -obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o -obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o -obj-$(CONFIG_MACH_FLEXIBITY) += board-flexibity.o - -# AT91SAM9261 board-specific support -obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o -obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o - -# AT91SAM9263 board-specific support -obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o - -# AT91SAM9RL board-specific support -obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o - -# AT91SAM9G20 board-specific support -obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o -obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o -obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o -obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o -obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o -obj-$(CONFIG_MACH_GSIA18S) += board-gsia18s.o board-stamp9g20.o - -# AT91SAM9260/AT91SAM9G20 board-specific support -obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o - -# AT91SAM9G45 board-specific support -obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o - # AT91SAM board with device-tree obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o # SAMA5 board with device-tree -obj-$(CONFIG_MACH_SAMA5_DT) += board-dt-sama5.o - -# AT91X40 board-specific support -obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o - -# Drivers -obj-y += leds.o +obj-$(CONFIG_SOC_SAMA5) += board-dt-sama5.o # Power Management obj-$(CONFIG_PM) += pm.o diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index 5309f9b6aab..29ed0fa374c 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -3,12 +3,6 @@ # PARAMS_PHYS must be within 4MB of ZRELADDR # INITRD_PHYS must be in RAM -ifeq ($(CONFIG_ARCH_AT91SAM9G45),y) - zreladdr-y += 0x70008000 -params_phys-y := 0x70000100 -initrd_phys-y := 0x70410000 -else zreladdr-y += 0x20008000 params_phys-y := 0x20000100 initrd_phys-y := 0x20410000 -endif diff --git a/arch/arm/mach-at91/at91_aic.h b/arch/arm/mach-at91/at91_aic.h deleted file mode 100644 index eaea66197fa..00000000000 --- a/arch/arm/mach-at91/at91_aic.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_aic.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Advanced Interrupt Controller (AIC) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_AIC_H -#define AT91_AIC_H - -#ifndef __ASSEMBLY__ -extern void __iomem *at91_aic_base; - -#define at91_aic_read(field) \ - __raw_readl(at91_aic_base + field) - -#define at91_aic_write(field, value) \ - __raw_writel(value, at91_aic_base + field) -#else -.extern at91_aic_base -#endif - -/* Number of irq lines managed by AIC */ -#define NR_AIC_IRQS 32 -#define NR_AIC5_IRQS 128 - -#define AT91_AIC5_SSR 0x0 /* Source Select Register [AIC5] */ -#define AT91_AIC5_INTSEL_MSK (0x7f << 0) /* Interrupt Line Selection Mask */ - -#define AT91_AIC_IRQ_MIN_PRIORITY 0 -#define AT91_AIC_IRQ_MAX_PRIORITY 7 - -#define AT91_AIC_SMR(n) ((n) * 4) /* Source Mode Registers 0-31 */ -#define AT91_AIC5_SMR 0x4 /* Source Mode Register [AIC5] */ -#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */ -#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */ -#define AT91_AIC_SRCTYPE_LOW (0 << 5) -#define AT91_AIC_SRCTYPE_FALLING (1 << 5) -#define AT91_AIC_SRCTYPE_HIGH (2 << 5) -#define AT91_AIC_SRCTYPE_RISING (3 << 5) - -#define AT91_AIC_SVR(n) (0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */ -#define AT91_AIC5_SVR 0x8 /* Source Vector Register [AIC5] */ -#define AT91_AIC_IVR 0x100 /* Interrupt Vector Register */ -#define AT91_AIC5_IVR 0x10 /* Interrupt Vector Register [AIC5] */ -#define AT91_AIC_FVR 0x104 /* Fast Interrupt Vector Register */ -#define AT91_AIC5_FVR 0x14 /* Fast Interrupt Vector Register [AIC5] */ -#define AT91_AIC_ISR 0x108 /* Interrupt Status Register */ -#define AT91_AIC5_ISR 0x18 /* Interrupt Status Register [AIC5] */ -#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */ - -#define AT91_AIC_IPR 0x10c /* Interrupt Pending Register */ -#define AT91_AIC5_IPR0 0x20 /* Interrupt Pending Register 0 [AIC5] */ -#define AT91_AIC5_IPR1 0x24 /* Interrupt Pending Register 1 [AIC5] */ -#define AT91_AIC5_IPR2 0x28 /* Interrupt Pending Register 2 [AIC5] */ -#define AT91_AIC5_IPR3 0x2c /* Interrupt Pending Register 3 [AIC5] */ -#define AT91_AIC_IMR 0x110 /* Interrupt Mask Register */ -#define AT91_AIC5_IMR 0x30 /* Interrupt Mask Register [AIC5] */ -#define AT91_AIC_CISR 0x114 /* Core Interrupt Status Register */ -#define AT91_AIC5_CISR 0x34 /* Core Interrupt Status Register [AIC5] */ -#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */ -#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */ - -#define AT91_AIC_IECR 0x120 /* Interrupt Enable Command Register */ -#define AT91_AIC5_IECR 0x40 /* Interrupt Enable Command Register [AIC5] */ -#define AT91_AIC_IDCR 0x124 /* Interrupt Disable Command Register */ -#define AT91_AIC5_IDCR 0x44 /* Interrupt Disable Command Register [AIC5] */ -#define AT91_AIC_ICCR 0x128 /* Interrupt Clear Command Register */ -#define AT91_AIC5_ICCR 0x48 /* Interrupt Clear Command Register [AIC5] */ -#define AT91_AIC_ISCR 0x12c /* Interrupt Set Command Register */ -#define AT91_AIC5_ISCR 0x4c /* Interrupt Set Command Register [AIC5] */ -#define AT91_AIC_EOICR 0x130 /* End of Interrupt Command Register */ -#define AT91_AIC5_EOICR 0x38 /* End of Interrupt Command Register [AIC5] */ -#define AT91_AIC_SPU 0x134 /* Spurious Interrupt Vector Register */ -#define AT91_AIC5_SPU 0x3c /* Spurious Interrupt Vector Register [AIC5] */ -#define AT91_AIC_DCR 0x138 /* Debug Control Register */ -#define AT91_AIC5_DCR 0x6c /* Debug Control Register [AIC5] */ -#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */ -#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */ - -#define AT91_AIC_FFER 0x140 /* Fast Forcing Enable Register [SAM9 only] */ -#define AT91_AIC5_FFER 0x50 /* Fast Forcing Enable Register [AIC5] */ -#define AT91_AIC_FFDR 0x144 /* Fast Forcing Disable Register [SAM9 only] */ -#define AT91_AIC5_FFDR 0x54 /* Fast Forcing Disable Register [AIC5] */ -#define AT91_AIC_FFSR 0x148 /* Fast Forcing Status Register [SAM9 only] */ -#define AT91_AIC5_FFSR 0x58 /* Fast Forcing Status Register [AIC5] */ - -void at91_aic_handle_irq(struct pt_regs *regs); -void at91_aic5_handle_irq(struct pt_regs *regs); - -#endif diff --git a/arch/arm/mach-at91/at91_tc.h b/arch/arm/mach-at91/at91_tc.h deleted file mode 100644 index 46a317fd716..00000000000 --- a/arch/arm/mach-at91/at91_tc.h +++ /dev/null @@ -1,146 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_tc.h - * - * Copyright (C) SAN People - * - * Timer/Counter Unit (TC) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_TC_H -#define AT91_TC_H - -#define AT91_TC_BCR 0xc0 /* TC Block Control Register */ -#define AT91_TC_SYNC (1 << 0) /* Synchro Command */ - -#define AT91_TC_BMR 0xc4 /* TC Block Mode Register */ -#define AT91_TC_TC0XC0S (3 << 0) /* External Clock Signal 0 Selection */ -#define AT91_TC_TC0XC0S_TCLK0 (0 << 0) -#define AT91_TC_TC0XC0S_NONE (1 << 0) -#define AT91_TC_TC0XC0S_TIOA1 (2 << 0) -#define AT91_TC_TC0XC0S_TIOA2 (3 << 0) -#define AT91_TC_TC1XC1S (3 << 2) /* External Clock Signal 1 Selection */ -#define AT91_TC_TC1XC1S_TCLK1 (0 << 2) -#define AT91_TC_TC1XC1S_NONE (1 << 2) -#define AT91_TC_TC1XC1S_TIOA0 (2 << 2) -#define AT91_TC_TC1XC1S_TIOA2 (3 << 2) -#define AT91_TC_TC2XC2S (3 << 4) /* External Clock Signal 2 Selection */ -#define AT91_TC_TC2XC2S_TCLK2 (0 << 4) -#define AT91_TC_TC2XC2S_NONE (1 << 4) -#define AT91_TC_TC2XC2S_TIOA0 (2 << 4) -#define AT91_TC_TC2XC2S_TIOA1 (3 << 4) - - -#define AT91_TC_CCR 0x00 /* Channel Control Register */ -#define AT91_TC_CLKEN (1 << 0) /* Counter Clock Enable Command */ -#define AT91_TC_CLKDIS (1 << 1) /* Counter CLock Disable Command */ -#define AT91_TC_SWTRG (1 << 2) /* Software Trigger Command */ - -#define AT91_TC_CMR 0x04 /* Channel Mode Register */ -#define AT91_TC_TCCLKS (7 << 0) /* Capture/Waveform Mode: Clock Selection */ -#define AT91_TC_TIMER_CLOCK1 (0 << 0) -#define AT91_TC_TIMER_CLOCK2 (1 << 0) -#define AT91_TC_TIMER_CLOCK3 (2 << 0) -#define AT91_TC_TIMER_CLOCK4 (3 << 0) -#define AT91_TC_TIMER_CLOCK5 (4 << 0) -#define AT91_TC_XC0 (5 << 0) -#define AT91_TC_XC1 (6 << 0) -#define AT91_TC_XC2 (7 << 0) -#define AT91_TC_CLKI (1 << 3) /* Capture/Waveform Mode: Clock Invert */ -#define AT91_TC_BURST (3 << 4) /* Capture/Waveform Mode: Burst Signal Selection */ -#define AT91_TC_LDBSTOP (1 << 6) /* Capture Mode: Counter Clock Stopped with TB Loading */ -#define AT91_TC_LDBDIS (1 << 7) /* Capture Mode: Counter Clock Disable with RB Loading */ -#define AT91_TC_ETRGEDG (3 << 8) /* Capture Mode: External Trigger Edge Selection */ -#define AT91_TC_ABETRG (1 << 10) /* Capture Mode: TIOA or TIOB External Trigger Selection */ -#define AT91_TC_CPCTRG (1 << 14) /* Capture Mode: RC Compare Trigger Enable */ -#define AT91_TC_WAVE (1 << 15) /* Capture/Waveform mode */ -#define AT91_TC_LDRA (3 << 16) /* Capture Mode: RA Loading Selection */ -#define AT91_TC_LDRB (3 << 18) /* Capture Mode: RB Loading Selection */ - -#define AT91_TC_CPCSTOP (1 << 6) /* Waveform Mode: Counter Clock Stopped with RC Compare */ -#define AT91_TC_CPCDIS (1 << 7) /* Waveform Mode: Counter Clock Disable with RC Compare */ -#define AT91_TC_EEVTEDG (3 << 8) /* Waveform Mode: External Event Edge Selection */ -#define AT91_TC_EEVTEDG_NONE (0 << 8) -#define AT91_TC_EEVTEDG_RISING (1 << 8) -#define AT91_TC_EEVTEDG_FALLING (2 << 8) -#define AT91_TC_EEVTEDG_BOTH (3 << 8) -#define AT91_TC_EEVT (3 << 10) /* Waveform Mode: External Event Selection */ -#define AT91_TC_EEVT_TIOB (0 << 10) -#define AT91_TC_EEVT_XC0 (1 << 10) -#define AT91_TC_EEVT_XC1 (2 << 10) -#define AT91_TC_EEVT_XC2 (3 << 10) -#define AT91_TC_ENETRG (1 << 12) /* Waveform Mode: External Event Trigger Enable */ -#define AT91_TC_WAVESEL (3 << 13) /* Waveform Mode: Waveform Selection */ -#define AT91_TC_WAVESEL_UP (0 << 13) -#define AT91_TC_WAVESEL_UP_AUTO (2 << 13) -#define AT91_TC_WAVESEL_UPDOWN (1 << 13) -#define AT91_TC_WAVESEL_UPDOWN_AUTO (3 << 13) -#define AT91_TC_ACPA (3 << 16) /* Waveform Mode: RA Compare Effect on TIOA */ -#define AT91_TC_ACPA_NONE (0 << 16) -#define AT91_TC_ACPA_SET (1 << 16) -#define AT91_TC_ACPA_CLEAR (2 << 16) -#define AT91_TC_ACPA_TOGGLE (3 << 16) -#define AT91_TC_ACPC (3 << 18) /* Waveform Mode: RC Compre Effect on TIOA */ -#define AT91_TC_ACPC_NONE (0 << 18) -#define AT91_TC_ACPC_SET (1 << 18) -#define AT91_TC_ACPC_CLEAR (2 << 18) -#define AT91_TC_ACPC_TOGGLE (3 << 18) -#define AT91_TC_AEEVT (3 << 20) /* Waveform Mode: External Event Effect on TIOA */ -#define AT91_TC_AEEVT_NONE (0 << 20) -#define AT91_TC_AEEVT_SET (1 << 20) -#define AT91_TC_AEEVT_CLEAR (2 << 20) -#define AT91_TC_AEEVT_TOGGLE (3 << 20) -#define AT91_TC_ASWTRG (3 << 22) /* Waveform Mode: Software Trigger Effect on TIOA */ -#define AT91_TC_ASWTRG_NONE (0 << 22) -#define AT91_TC_ASWTRG_SET (1 << 22) -#define AT91_TC_ASWTRG_CLEAR (2 << 22) -#define AT91_TC_ASWTRG_TOGGLE (3 << 22) -#define AT91_TC_BCPB (3 << 24) /* Waveform Mode: RB Compare Effect on TIOB */ -#define AT91_TC_BCPB_NONE (0 << 24) -#define AT91_TC_BCPB_SET (1 << 24) -#define AT91_TC_BCPB_CLEAR (2 << 24) -#define AT91_TC_BCPB_TOGGLE (3 << 24) -#define AT91_TC_BCPC (3 << 26) /* Waveform Mode: RC Compare Effect on TIOB */ -#define AT91_TC_BCPC_NONE (0 << 26) -#define AT91_TC_BCPC_SET (1 << 26) -#define AT91_TC_BCPC_CLEAR (2 << 26) -#define AT91_TC_BCPC_TOGGLE (3 << 26) -#define AT91_TC_BEEVT (3 << 28) /* Waveform Mode: External Event Effect on TIOB */ -#define AT91_TC_BEEVT_NONE (0 << 28) -#define AT91_TC_BEEVT_SET (1 << 28) -#define AT91_TC_BEEVT_CLEAR (2 << 28) -#define AT91_TC_BEEVT_TOGGLE (3 << 28) -#define AT91_TC_BSWTRG (3 << 30) /* Waveform Mode: Software Trigger Effect on TIOB */ -#define AT91_TC_BSWTRG_NONE (0 << 30) -#define AT91_TC_BSWTRG_SET (1 << 30) -#define AT91_TC_BSWTRG_CLEAR (2 << 30) -#define AT91_TC_BSWTRG_TOGGLE (3 << 30) - -#define AT91_TC_CV 0x10 /* Counter Value */ -#define AT91_TC_RA 0x14 /* Register A */ -#define AT91_TC_RB 0x18 /* Register B */ -#define AT91_TC_RC 0x1c /* Register C */ - -#define AT91_TC_SR 0x20 /* Status Register */ -#define AT91_TC_COVFS (1 << 0) /* Counter Overflow Status */ -#define AT91_TC_LOVRS (1 << 1) /* Load Overrun Status */ -#define AT91_TC_CPAS (1 << 2) /* RA Compare Status */ -#define AT91_TC_CPBS (1 << 3) /* RB Compare Status */ -#define AT91_TC_CPCS (1 << 4) /* RC Compare Status */ -#define AT91_TC_LDRAS (1 << 5) /* RA Loading Status */ -#define AT91_TC_LDRBS (1 << 6) /* RB Loading Status */ -#define AT91_TC_ETRGS (1 << 7) /* External Trigger Status */ -#define AT91_TC_CLKSTA (1 << 16) /* Clock Enabling Status */ -#define AT91_TC_MTIOA (1 << 17) /* TIOA Mirror */ -#define AT91_TC_MTIOB (1 << 18) /* TIOB Mirror */ - -#define AT91_TC_IER 0x24 /* Interrupt Enable Register */ -#define AT91_TC_IDR 0x28 /* Interrupt Disable Register */ -#define AT91_TC_IMR 0x2c /* Interrupt Mask Register */ - -#endif diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 038702ee8bc..b5291694753 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -11,296 +11,15 @@ */ #include <linux/module.h> -#include <linux/reboot.h> #include <linux/clk/at91_pmc.h> -#include <asm/irq.h> -#include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/system_misc.h> -#include <mach/at91rm9200.h> #include <mach/at91_st.h> -#include <mach/cpu.h> #include <mach/hardware.h> -#include "at91_aic.h" #include "soc.h" #include "generic.h" -#include "sam9_smc.h" -#include "pm.h" - -#if defined(CONFIG_OLD_CLK_AT91) -#include "clock.h" -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk udc_clk = { - .name = "udc_clk", - .pmc_mask = 1 << AT91RM9200_ID_UDP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 1 << AT91RM9200_ID_UHP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ether_clk = { - .name = "ether_clk", - .pmc_mask = 1 << AT91RM9200_ID_EMAC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc_clk = { - .name = "mci_clk", - .pmc_mask = 1 << AT91RM9200_ID_MCI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi_clk = { - .name = "twi_clk", - .pmc_mask = 1 << AT91RM9200_ID_TWI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT91RM9200_ID_US0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT91RM9200_ID_US1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT91RM9200_ID_US2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart3_clk = { - .name = "usart3_clk", - .pmc_mask = 1 << AT91RM9200_ID_US3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi_clk = { - .name = "spi_clk", - .pmc_mask = 1 << AT91RM9200_ID_SPI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioA_clk = { - .name = "pioA_clk", - .pmc_mask = 1 << AT91RM9200_ID_PIOA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioB_clk = { - .name = "pioB_clk", - .pmc_mask = 1 << AT91RM9200_ID_PIOB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioC_clk = { - .name = "pioC_clk", - .pmc_mask = 1 << AT91RM9200_ID_PIOC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioD_clk = { - .name = "pioD_clk", - .pmc_mask = 1 << AT91RM9200_ID_PIOD, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc0_clk = { - .name = "ssc0_clk", - .pmc_mask = 1 << AT91RM9200_ID_SSC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc1_clk = { - .name = "ssc1_clk", - .pmc_mask = 1 << AT91RM9200_ID_SSC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc2_clk = { - .name = "ssc2_clk", - .pmc_mask = 1 << AT91RM9200_ID_SSC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc0_clk = { - .name = "tc0_clk", - .pmc_mask = 1 << AT91RM9200_ID_TC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc1_clk = { - .name = "tc1_clk", - .pmc_mask = 1 << AT91RM9200_ID_TC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc2_clk = { - .name = "tc2_clk", - .pmc_mask = 1 << AT91RM9200_ID_TC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc3_clk = { - .name = "tc3_clk", - .pmc_mask = 1 << AT91RM9200_ID_TC3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc4_clk = { - .name = "tc4_clk", - .pmc_mask = 1 << AT91RM9200_ID_TC4, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc5_clk = { - .name = "tc5_clk", - .pmc_mask = 1 << AT91RM9200_ID_TC5, - .type = CLK_TYPE_PERIPHERAL, -}; - -static struct clk *periph_clocks[] __initdata = { - &pioA_clk, - &pioB_clk, - &pioC_clk, - &pioD_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &usart3_clk, - &mmc_clk, - &udc_clk, - &twi_clk, - &spi_clk, - &ssc0_clk, - &ssc1_clk, - &ssc2_clk, - &tc0_clk, - &tc1_clk, - &tc2_clk, - &tc3_clk, - &tc4_clk, - &tc5_clk, - &ohci_clk, - ðer_clk, - // irq0 .. irq6 -}; - -static struct clk_lookup periph_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), - CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), - CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), - CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), - CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk), - CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.2", &ssc2_clk), - CLKDEV_CON_DEV_ID("pclk", "fffd0000.ssc", &ssc0_clk), - CLKDEV_CON_DEV_ID("pclk", "fffd4000.ssc", &ssc1_clk), - CLKDEV_CON_DEV_ID("pclk", "fffd8000.ssc", &ssc2_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200.0", &twi_clk), - /* fake hclk clock */ - CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), - CLKDEV_CON_ID("pioA", &pioA_clk), - CLKDEV_CON_ID("pioB", &pioB_clk), - CLKDEV_CON_ID("pioC", &pioC_clk), - CLKDEV_CON_ID("pioD", &pioD_clk), - /* usart lookup table for DT entries */ - CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), - CLKDEV_CON_DEV_ID("usart", "fffc0000.serial", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "fffc4000.serial", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "fffc8000.serial", &usart2_clk), - CLKDEV_CON_DEV_ID("usart", "fffcc000.serial", &usart3_clk), - /* tc lookup table for DT entries */ - CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), - CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk), - CLKDEV_CON_DEV_ID("t0_clk", "fffa4000.timer", &tc3_clk), - CLKDEV_CON_DEV_ID("t1_clk", "fffa4000.timer", &tc4_clk), - CLKDEV_CON_DEV_ID("t2_clk", "fffa4000.timer", &tc5_clk), - CLKDEV_CON_DEV_ID("mci_clk", "fffb4000.mmc", &mmc_clk), - CLKDEV_CON_DEV_ID("emac_clk", "fffbc000.ethernet", ðer_clk), - CLKDEV_CON_DEV_ID(NULL, "fffb8000.i2c", &twi_clk), - CLKDEV_CON_DEV_ID("hclk", "300000.ohci", &ohci_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), - CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk), -}; - -static struct clk_lookup usart_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), -}; - -/* - * The four programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; -static struct clk pck2 = { - .name = "pck2", - .pmc_mask = AT91_PMC_PCK2, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 2, -}; -static struct clk pck3 = { - .name = "pck3", - .pmc_mask = AT91_PMC_PCK3, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 3, -}; - -static void __init at91rm9200_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clkdev_add_table(periph_clocks_lookups, - ARRAY_SIZE(periph_clocks_lookups)); - clkdev_add_table(usart_clocks_lookups, - ARRAY_SIZE(usart_clocks_lookups)); - - clk_register(&pck0); - clk_register(&pck1); - clk_register(&pck2); - clk_register(&pck3); -} -#else -#define at91rm9200_register_clocks NULL -#endif - -/* -------------------------------------------------------------------- - * GPIO - * -------------------------------------------------------------------- */ - -static struct at91_gpio_bank at91rm9200_gpio[] __initdata = { - { - .id = AT91RM9200_ID_PIOA, - .regbase = AT91RM9200_BASE_PIOA, - }, { - .id = AT91RM9200_ID_PIOB, - .regbase = AT91RM9200_BASE_PIOB, - }, { - .id = AT91RM9200_ID_PIOC, - .regbase = AT91RM9200_BASE_PIOC, - }, { - .id = AT91RM9200_ID_PIOD, - .regbase = AT91RM9200_BASE_PIOD, - } -}; static void at91rm9200_idle(void) { @@ -329,74 +48,14 @@ static void __init at91rm9200_map_io(void) at91_init_sram(0, AT91RM9200_SRAM_BASE, AT91RM9200_SRAM_SIZE); } -static void __init at91rm9200_ioremap_registers(void) -{ - at91rm9200_ioremap_st(AT91RM9200_BASE_ST); - at91_ioremap_ramc(0, AT91RM9200_BASE_MC, 256); - at91_pm_set_standby(at91rm9200_standby); -} - static void __init at91rm9200_initialize(void) { arm_pm_idle = at91rm9200_idle; arm_pm_restart = at91rm9200_restart; - - /* Initialize GPIO subsystem */ - at91_gpio_init(at91rm9200_gpio, - cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP); } -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller (FIQ) */ - 7, /* System Peripherals */ - 1, /* Parallel IO Controller A */ - 1, /* Parallel IO Controller B */ - 1, /* Parallel IO Controller C */ - 1, /* Parallel IO Controller D */ - 5, /* USART 0 */ - 5, /* USART 1 */ - 5, /* USART 2 */ - 5, /* USART 3 */ - 0, /* Multimedia Card Interface */ - 2, /* USB Device Port */ - 6, /* Two-Wire Interface */ - 5, /* Serial Peripheral Interface */ - 4, /* Serial Synchronous Controller 0 */ - 4, /* Serial Synchronous Controller 1 */ - 4, /* Serial Synchronous Controller 2 */ - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ - 0, /* Timer Counter 3 */ - 0, /* Timer Counter 4 */ - 0, /* Timer Counter 5 */ - 2, /* USB Host port */ - 3, /* Ethernet MAC */ - 0, /* Advanced Interrupt Controller (IRQ0) */ - 0, /* Advanced Interrupt Controller (IRQ1) */ - 0, /* Advanced Interrupt Controller (IRQ2) */ - 0, /* Advanced Interrupt Controller (IRQ3) */ - 0, /* Advanced Interrupt Controller (IRQ4) */ - 0, /* Advanced Interrupt Controller (IRQ5) */ - 0 /* Advanced Interrupt Controller (IRQ6) */ -}; - AT91_SOC_START(at91rm9200) .map_io = at91rm9200_map_io, - .default_irq_priority = at91rm9200_default_irq_priority, - .extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) - | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) - | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5) - | (1 << AT91RM9200_ID_IRQ6), - .ioremap_registers = at91rm9200_ioremap_registers, - .register_clocks = at91rm9200_register_clocks, .init = at91rm9200_initialize, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c deleted file mode 100644 index 74f1eaf9780..00000000000 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ /dev/null @@ -1,1212 +0,0 @@ -/* - * arch/arm/mach-at91/at91rm9200_devices.c - * - * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> - * Copyright (C) 2005 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/platform_device.h> -#include <linux/i2c-gpio.h> - -#include <mach/at91rm9200.h> -#include <mach/at91rm9200_mc.h> -#include <mach/at91_ramc.h> -#include <mach/hardware.h> - -#include "board.h" -#include "generic.h" -#include "gpio.h" - - -/* -------------------------------------------------------------------- - * USB Host - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = DMA_BIT_MASK(32); -static struct at91_usbh_data usbh_data; - -static struct resource usbh_resources[] = { - [0] = { - .start = AT91RM9200_UHP_BASE, - .end = AT91RM9200_UHP_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91RM9200_ID_UHP, - .end = NR_IRQS_LEGACY + AT91RM9200_ID_UHP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91rm9200_usbh_device = { - .name = "at91_ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, - .num_resources = ARRAY_SIZE(usbh_resources), -}; - -void __init at91_add_device_usbh(struct at91_usbh_data *data) -{ - int i; - - if (!data) - return; - - /* Enable overcurrent notification */ - for (i = 0; i < data->ports; i++) { - if (gpio_is_valid(data->overcurrent_pin[i])) - at91_set_gpio_input(data->overcurrent_pin[i], 1); - } - - usbh_data = *data; - platform_device_register(&at91rm9200_usbh_device); -} -#else -void __init at91_add_device_usbh(struct at91_usbh_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * USB Device (Gadget) - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) -static struct at91_udc_data udc_data; - -static struct resource udc_resources[] = { - [0] = { - .start = AT91RM9200_BASE_UDP, - .end = AT91RM9200_BASE_UDP + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91RM9200_ID_UDP, - .end = NR_IRQS_LEGACY + AT91RM9200_ID_UDP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91rm9200_udc_device = { - .name = "at91_udc", - .id = -1, - .dev = { - .platform_data = &udc_data, - }, - .resource = udc_resources, - .num_resources = ARRAY_SIZE(udc_resources), -}; - -void __init at91_add_device_udc(struct at91_udc_data *data) -{ - if (!data) - return; - - if (gpio_is_valid(data->vbus_pin)) { - at91_set_gpio_input(data->vbus_pin, 0); - at91_set_deglitch(data->vbus_pin, 1); - } - if (gpio_is_valid(data->pullup_pin)) - at91_set_gpio_output(data->pullup_pin, 0); - - udc_data = *data; - platform_device_register(&at91rm9200_udc_device); -} -#else -void __init at91_add_device_udc(struct at91_udc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Ethernet - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE) -static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct macb_platform_data eth_data; - -static struct resource eth_resources[] = { - [0] = { - .start = AT91RM9200_BASE_EMAC, - .end = AT91RM9200_BASE_EMAC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91RM9200_ID_EMAC, - .end = NR_IRQS_LEGACY + AT91RM9200_ID_EMAC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91rm9200_eth_device = { - .name = "at91_ether", - .id = -1, - .dev = { - .dma_mask = ð_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = ð_data, - }, - .resource = eth_resources, - .num_resources = ARRAY_SIZE(eth_resources), -}; - -void __init at91_add_device_eth(struct macb_platform_data *data) -{ - if (!data) - return; - - if (gpio_is_valid(data->phy_irq_pin)) { - at91_set_gpio_input(data->phy_irq_pin, 0); - at91_set_deglitch(data->phy_irq_pin, 1); - } - - /* Pins used for MII and RMII */ - at91_set_A_periph(AT91_PIN_PA16, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PA15, 0); /* EMDC */ - at91_set_A_periph(AT91_PIN_PA14, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PA11, 0); /* ECRS_ECRSDV */ - at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PA9, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PA8, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PA7, 0); /* ETXCK_EREFCK */ - - if (!data->is_rmii) { - at91_set_B_periph(AT91_PIN_PB19, 0); /* ERXCK */ - at91_set_B_periph(AT91_PIN_PB18, 0); /* ECOL */ - at91_set_B_periph(AT91_PIN_PB17, 0); /* ERXDV */ - at91_set_B_periph(AT91_PIN_PB16, 0); /* ERX3 */ - at91_set_B_periph(AT91_PIN_PB15, 0); /* ERX2 */ - at91_set_B_periph(AT91_PIN_PB14, 0); /* ETXER */ - at91_set_B_periph(AT91_PIN_PB13, 0); /* ETX3 */ - at91_set_B_periph(AT91_PIN_PB12, 0); /* ETX2 */ - } - - eth_data = *data; - platform_device_register(&at91rm9200_eth_device); -} -#else -void __init at91_add_device_eth(struct macb_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Compact Flash / PCMCIA - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) -static struct at91_cf_data cf_data; - -#define CF_BASE AT91_CHIPSELECT_4 - -static struct resource cf_resources[] = { - [0] = { - .start = CF_BASE, - /* ties up CS4, CS5 and CS6 */ - .end = CF_BASE + (0x30000000 - 1), - .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, - }, -}; - -static struct platform_device at91rm9200_cf_device = { - .name = "at91_cf", - .id = -1, - .dev = { - .platform_data = &cf_data, - }, - .resource = cf_resources, - .num_resources = ARRAY_SIZE(cf_resources), -}; - -void __init at91_add_device_cf(struct at91_cf_data *data) -{ - unsigned int csa; - - if (!data) - return; - - data->chipselect = 4; /* can only use EBI ChipSelect 4 */ - - /* CF takes over CS4, CS5, CS6 */ - csa = at91_ramc_read(0, AT91_EBI_CSA); - at91_ramc_write(0, AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH); - - /* - * Static memory controller timing adjustments. - * REVISIT: these timings are in terms of MCK cycles, so - * when MCK changes (cpufreq etc) so must these values... - */ - at91_ramc_write(0, AT91_SMC_CSR(4), - AT91_SMC_ACSS_STD - | AT91_SMC_DBW_16 - | AT91_SMC_BAT - | AT91_SMC_WSEN - | AT91_SMC_NWS_(32) /* wait states */ - | AT91_SMC_RWSETUP_(6) /* setup time */ - | AT91_SMC_RWHOLD_(4) /* hold time */ - ); - - /* input/irq */ - if (gpio_is_valid(data->irq_pin)) { - at91_set_gpio_input(data->irq_pin, 1); - at91_set_deglitch(data->irq_pin, 1); - } - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - - /* outputs, initially off */ - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); - at91_set_gpio_output(data->rst_pin, 0); - - /* force poweron defaults for these pins ... */ - at91_set_A_periph(AT91_PIN_PC9, 0); /* A25/CFRNW */ - at91_set_A_periph(AT91_PIN_PC10, 0); /* NCS4/CFCS */ - at91_set_A_periph(AT91_PIN_PC11, 0); /* NCS5/CFCE1 */ - at91_set_A_periph(AT91_PIN_PC12, 0); /* NCS6/CFCE2 */ - - /* nWAIT is _not_ a default setting */ - at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */ - - cf_data = *data; - platform_device_register(&at91rm9200_cf_device); -} -#else -void __init at91_add_device_cf(struct at91_cf_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if IS_ENABLED(CONFIG_MMC_ATMELMCI) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct mci_platform_data mmc_data; - -static struct resource mmc_resources[] = { - [0] = { - .start = AT91RM9200_BASE_MCI, - .end = AT91RM9200_BASE_MCI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91RM9200_ID_MCI, - .end = NR_IRQS_LEGACY + AT91RM9200_ID_MCI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91rm9200_mmc_device = { - .name = "atmel_mci", - .id = -1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc_data, - }, - .resource = mmc_resources, - .num_resources = ARRAY_SIZE(mmc_resources), -}; - -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) -{ - unsigned int i; - unsigned int slot_count = 0; - - if (!data) - return; - - for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { - - if (!data->slot[i].bus_width) - continue; - - /* input/irq */ - if (gpio_is_valid(data->slot[i].detect_pin)) { - at91_set_gpio_input(data->slot[i].detect_pin, 1); - at91_set_deglitch(data->slot[i].detect_pin, 1); - } - if (gpio_is_valid(data->slot[i].wp_pin)) - at91_set_gpio_input(data->slot[i].wp_pin, 1); - - switch (i) { - case 0: /* slot A */ - /* CMD */ - at91_set_A_periph(AT91_PIN_PA28, 1); - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA29, 1); - if (data->slot[i].bus_width == 4) { - at91_set_B_periph(AT91_PIN_PB3, 1); - at91_set_B_periph(AT91_PIN_PB4, 1); - at91_set_B_periph(AT91_PIN_PB5, 1); - } - slot_count++; - break; - case 1: /* slot B */ - /* CMD */ - at91_set_B_periph(AT91_PIN_PA8, 1); - /* DAT0, maybe DAT1..DAT3 */ - at91_set_B_periph(AT91_PIN_PA9, 1); - if (data->slot[i].bus_width == 4) { - at91_set_B_periph(AT91_PIN_PA10, 1); - at91_set_B_periph(AT91_PIN_PA11, 1); - at91_set_B_periph(AT91_PIN_PA12, 1); - } - slot_count++; - break; - default: - printk(KERN_ERR - "AT91: SD/MMC slot %d not available\n", i); - break; - } - if (slot_count) { - /* CLK */ - at91_set_A_periph(AT91_PIN_PA27, 0); - - mmc_data = *data; - platform_device_register(&at91rm9200_mmc_device); - } - } - -} -#else -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * NAND / SmartMedia - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) -static struct atmel_nand_data nand_data; - -#define NAND_BASE AT91_CHIPSELECT_3 - -static struct resource nand_resources[] = { - { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91rm9200_nand_device = { - .name = "atmel_nand", - .id = -1, - .dev = { - .platform_data = &nand_data, - }, - .resource = nand_resources, - .num_resources = ARRAY_SIZE(nand_resources), -}; - -void __init at91_add_device_nand(struct atmel_nand_data *data) -{ - unsigned int csa; - - if (!data) - return; - - /* enable the address range of CS3 */ - csa = at91_ramc_read(0, AT91_EBI_CSA); - at91_ramc_write(0, AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA); - - /* set the bus interface characteristics */ - at91_ramc_write(0, AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN - | AT91_SMC_NWS_(5) - | AT91_SMC_TDF_(1) - | AT91_SMC_RWSETUP_(0) /* tDS Data Set up Time 30 - ns */ - | AT91_SMC_RWHOLD_(1) /* tDH Data Hold Time 20 - ns */ - ); - - /* enable pin */ - if (gpio_is_valid(data->enable_pin)) - at91_set_gpio_output(data->enable_pin, 1); - - /* ready/busy pin */ - if (gpio_is_valid(data->rdy_pin)) - at91_set_gpio_input(data->rdy_pin, 1); - - /* card detect pin */ - if (gpio_is_valid(data->det_pin)) - at91_set_gpio_input(data->det_pin, 1); - - at91_set_A_periph(AT91_PIN_PC1, 0); /* SMOE */ - at91_set_A_periph(AT91_PIN_PC3, 0); /* SMWE */ - - nand_data = *data; - platform_device_register(&at91rm9200_nand_device); -} -#else -void __init at91_add_device_nand(struct atmel_nand_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * TWI (i2c) - * -------------------------------------------------------------------- */ - -/* - * Prefer the GPIO code since the TWI controller isn't robust - * (gets overruns and underruns under load) and can only issue - * repeated STARTs in one scenario (the driver doesn't yet handle them). - */ -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = AT91_PIN_PA25, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PA26, - .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ -}; - -static struct platform_device at91rm9200_twi_device = { - .name = "i2c-gpio", - .id = 0, - .dev.platform_data = &pdata, -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - at91_set_GPIO_periph(AT91_PIN_PA25, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PA25, 1); - - at91_set_GPIO_periph(AT91_PIN_PA26, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PA26, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91rm9200_twi_device); -} - -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) - -static struct resource twi_resources[] = { - [0] = { - .start = AT91RM9200_BASE_TWI, - .end = AT91RM9200_BASE_TWI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91RM9200_ID_TWI, - .end = NR_IRQS_LEGACY + AT91RM9200_ID_TWI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91rm9200_twi_device = { - .name = "i2c-at91rm9200", - .id = 0, - .resource = twi_resources, - .num_resources = ARRAY_SIZE(twi_resources), -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - /* pins used for TWI interface */ - at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PA25, 1); - - at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PA26, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91rm9200_twi_device); -} -#else -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * SPI - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = DMA_BIT_MASK(32); - -static struct resource spi_resources[] = { - [0] = { - .start = AT91RM9200_BASE_SPI, - .end = AT91RM9200_BASE_SPI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91RM9200_ID_SPI, - .end = NR_IRQS_LEGACY + AT91RM9200_ID_SPI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91rm9200_spi_device = { - .name = "atmel_spi", - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi_resources, - .num_resources = ARRAY_SIZE(spi_resources), -}; - -static const unsigned spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 }; - -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -{ - int i; - unsigned long cs_pin; - - at91_set_A_periph(AT91_PIN_PA0, 0); /* MISO */ - at91_set_A_periph(AT91_PIN_PA1, 0); /* MOSI */ - at91_set_A_periph(AT91_PIN_PA2, 0); /* SPCK */ - - /* Enable SPI chip-selects */ - for (i = 0; i < nr_devices; i++) { - if (devices[i].controller_data) - cs_pin = (unsigned long) devices[i].controller_data; - else - cs_pin = spi_standard_cs[devices[i].chip_select]; - - if (devices[i].chip_select == 0) /* for CS0 errata */ - at91_set_A_periph(cs_pin, 0); - else - at91_set_gpio_output(cs_pin, 1); - - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; - } - - spi_register_board_info(devices, nr_devices); - platform_device_register(&at91rm9200_spi_device); -} -#else -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * Timer/Counter blocks - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_ATMEL_TCLIB - -static struct resource tcb0_resources[] = { - [0] = { - .start = AT91RM9200_BASE_TCB0, - .end = AT91RM9200_BASE_TCB0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC0, - .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC0, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC1, - .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC1, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC2, - .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91rm9200_tcb0_device = { - .name = "atmel_tcb", - .id = 0, - .resource = tcb0_resources, - .num_resources = ARRAY_SIZE(tcb0_resources), -}; - -static struct resource tcb1_resources[] = { - [0] = { - .start = AT91RM9200_BASE_TCB1, - .end = AT91RM9200_BASE_TCB1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC3, - .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC3, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC4, - .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC4, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC5, - .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC5, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91rm9200_tcb1_device = { - .name = "atmel_tcb", - .id = 1, - .resource = tcb1_resources, - .num_resources = ARRAY_SIZE(tcb1_resources), -}; - -static void __init at91_add_device_tc(void) -{ - platform_device_register(&at91rm9200_tcb0_device); - platform_device_register(&at91rm9200_tcb1_device); -} -#else -static void __init at91_add_device_tc(void) { } -#endif - - -/* -------------------------------------------------------------------- - * RTC - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE) -static struct resource rtc_resources[] = { - [0] = { - .start = AT91RM9200_BASE_RTC, - .end = AT91RM9200_BASE_RTC + SZ_256 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91_ID_SYS, - .end = NR_IRQS_LEGACY + AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91rm9200_rtc_device = { - .name = "at91_rtc", - .id = -1, - .resource = rtc_resources, - .num_resources = ARRAY_SIZE(rtc_resources), -}; - -static void __init at91_add_device_rtc(void) -{ - platform_device_register(&at91rm9200_rtc_device); -} -#else -static void __init at91_add_device_rtc(void) {} -#endif - - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91RM9200_WATCHDOG) || defined(CONFIG_AT91RM9200_WATCHDOG_MODULE) -static struct platform_device at91rm9200_wdt_device = { - .name = "at91_wdt", - .id = -1, - .num_resources = 0, -}; - -static void __init at91_add_device_watchdog(void) -{ - platform_device_register(&at91rm9200_wdt_device); -} -#else -static void __init at91_add_device_watchdog(void) {} -#endif - - -/* -------------------------------------------------------------------- - * SSC -- Synchronous Serial Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) -static u64 ssc0_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc0_resources[] = { - [0] = { - .start = AT91RM9200_BASE_SSC0, - .end = AT91RM9200_BASE_SSC0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC0, - .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91rm9200_ssc0_device = { - .name = "at91rm9200_ssc", - .id = 0, - .dev = { - .dma_mask = &ssc0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc0_resources, - .num_resources = ARRAY_SIZE(ssc0_resources), -}; - -static inline void configure_ssc0_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PB0, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PB1, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PB2, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PB3, 1); - if (pins & ATMEL_SSC_RK) - at91_set_A_periph(AT91_PIN_PB4, 1); - if (pins & ATMEL_SSC_RF) - at91_set_A_periph(AT91_PIN_PB5, 1); -} - -static u64 ssc1_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc1_resources[] = { - [0] = { - .start = AT91RM9200_BASE_SSC1, - .end = AT91RM9200_BASE_SSC1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC1, - .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91rm9200_ssc1_device = { - .name = "at91rm9200_ssc", - .id = 1, - .dev = { - .dma_mask = &ssc1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc1_resources, - .num_resources = ARRAY_SIZE(ssc1_resources), -}; - -static inline void configure_ssc1_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PB6, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PB7, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PB8, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PB9, 1); - if (pins & ATMEL_SSC_RK) - at91_set_A_periph(AT91_PIN_PB10, 1); - if (pins & ATMEL_SSC_RF) - at91_set_A_periph(AT91_PIN_PB11, 1); -} - -static u64 ssc2_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc2_resources[] = { - [0] = { - .start = AT91RM9200_BASE_SSC2, - .end = AT91RM9200_BASE_SSC2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC2, - .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91rm9200_ssc2_device = { - .name = "at91rm9200_ssc", - .id = 2, - .dev = { - .dma_mask = &ssc2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc2_resources, - .num_resources = ARRAY_SIZE(ssc2_resources), -}; - -static inline void configure_ssc2_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PB12, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PB13, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PB14, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PB15, 1); - if (pins & ATMEL_SSC_RK) - at91_set_A_periph(AT91_PIN_PB16, 1); - if (pins & ATMEL_SSC_RF) - at91_set_A_periph(AT91_PIN_PB17, 1); -} - -/* - * SSC controllers are accessed through library code, instead of any - * kind of all-singing/all-dancing driver. For example one could be - * used by a particular I2S audio codec's driver, while another one - * on the same system might be used by a custom data capture driver. - */ -void __init at91_add_device_ssc(unsigned id, unsigned pins) -{ - struct platform_device *pdev; - - /* - * NOTE: caller is responsible for passing information matching - * "pins" to whatever will be using each particular controller. - */ - switch (id) { - case AT91RM9200_ID_SSC0: - pdev = &at91rm9200_ssc0_device; - configure_ssc0_pins(pins); - break; - case AT91RM9200_ID_SSC1: - pdev = &at91rm9200_ssc1_device; - configure_ssc1_pins(pins); - break; - case AT91RM9200_ID_SSC2: - pdev = &at91rm9200_ssc2_device; - configure_ssc2_pins(pins); - break; - default: - return; - } - - platform_device_register(pdev); -} - -#else -void __init at91_add_device_ssc(unsigned id, unsigned pins) {} -#endif - - -/* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SERIAL_ATMEL) -static struct resource dbgu_resources[] = { - [0] = { - .start = AT91RM9200_BASE_DBGU, - .end = AT91RM9200_BASE_DBGU + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91_ID_SYS, - .end = NR_IRQS_LEGACY + AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data dbgu_data = { - .use_dma_tx = 0, - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ -}; - -static u64 dbgu_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91rm9200_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { - .dma_mask = &dbgu_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -}; - -static inline void configure_dbgu_pins(void) -{ - at91_set_A_periph(AT91_PIN_PA30, 0); /* DRXD */ - at91_set_A_periph(AT91_PIN_PA31, 1); /* DTXD */ -} - -static struct resource uart0_resources[] = { - [0] = { - .start = AT91RM9200_BASE_US0, - .end = AT91RM9200_BASE_US0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91RM9200_ID_US0, - .end = NR_IRQS_LEGACY + AT91RM9200_ID_US0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart0_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static struct gpiod_lookup_table uart0_gpios_table = { - .dev_id = "atmel_usart", - .table = { - GPIO_LOOKUP("pioA", 21, "rts", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static u64 uart0_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91rm9200_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { - .dma_mask = &uart0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), -}; - -static inline void configure_usart0_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PA18, 0); /* RXD0 */ - - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */ - - if (pins & ATMEL_UART_RTS) { - /* - * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21. - * We need to drive the pin manually. The serial driver will driver - * this to high when initializing. - */ - gpiod_add_lookup_table(&uart0_gpios_table); - } -} - -static struct resource uart1_resources[] = { - [0] = { - .start = AT91RM9200_BASE_US1, - .end = AT91RM9200_BASE_US1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91RM9200_ID_US1, - .end = NR_IRQS_LEGACY + AT91RM9200_ID_US1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart1_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart1_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91rm9200_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { - .dma_mask = &uart1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), -}; - -static inline void configure_usart1_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PB21, 0); /* RXD1 */ - - if (pins & ATMEL_UART_RI) - at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */ - if (pins & ATMEL_UART_DTR) - at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */ - if (pins & ATMEL_UART_DCD) - at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */ - if (pins & ATMEL_UART_DSR) - at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */ - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */ -} - -static struct resource uart2_resources[] = { - [0] = { - .start = AT91RM9200_BASE_US2, - .end = AT91RM9200_BASE_US2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91RM9200_ID_US2, - .end = NR_IRQS_LEGACY + AT91RM9200_ID_US2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart2_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart2_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91rm9200_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { - .dma_mask = &uart2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), -}; - -static inline void configure_usart2_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */ - at91_set_A_periph(AT91_PIN_PA23, 1); /* TXD2 */ - - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PA30, 0); /* CTS2 */ - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PA31, 0); /* RTS2 */ -} - -static struct resource uart3_resources[] = { - [0] = { - .start = AT91RM9200_BASE_US3, - .end = AT91RM9200_BASE_US3 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91RM9200_ID_US3, - .end = NR_IRQS_LEGACY + AT91RM9200_ID_US3, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart3_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart3_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91rm9200_uart3_device = { - .name = "atmel_usart", - .id = 4, - .dev = { - .dma_mask = &uart3_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart3_data, - }, - .resource = uart3_resources, - .num_resources = ARRAY_SIZE(uart3_resources), -}; - -static inline void configure_usart3_pins(unsigned pins) -{ - at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */ - at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */ - - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */ - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */ -} - -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ - -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -{ - struct platform_device *pdev; - struct atmel_uart_data *pdata; - - switch (id) { - case 0: /* DBGU */ - pdev = &at91rm9200_dbgu_device; - configure_dbgu_pins(); - break; - case AT91RM9200_ID_US0: - pdev = &at91rm9200_uart0_device; - configure_usart0_pins(pins); - break; - case AT91RM9200_ID_US1: - pdev = &at91rm9200_uart1_device; - configure_usart1_pins(pins); - break; - case AT91RM9200_ID_US2: - pdev = &at91rm9200_uart2_device; - configure_usart2_pins(pins); - break; - case AT91RM9200_ID_US3: - pdev = &at91rm9200_uart3_device; - configure_usart3_pins(pins); - break; - default: - return; - } - pdata = pdev->dev.platform_data; - pdata->num = portnr; /* update to mapped ID */ - - if (portnr < ATMEL_MAX_UART) - at91_uarts[portnr] = pdev; -} - -void __init at91_add_device_serial(void) -{ - int i; - - for (i = 0; i < ATMEL_MAX_UART; i++) { - if (at91_uarts[i]) - platform_device_register(at91_uarts[i]); - } -} -#else -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_add_device_serial(void) {} -#endif - - -/* -------------------------------------------------------------------- */ - -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init at91_add_standard_devices(void) -{ - at91_add_device_rtc(); - at91_add_device_watchdog(); - at91_add_device_tc(); - return 0; -} - -arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 7fd13aef982..51761f8927b 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -183,7 +183,6 @@ static struct clock_event_device clkevt = { void __iomem *at91_st_base; EXPORT_SYMBOL_GPL(at91_st_base); -#ifdef CONFIG_OF static struct of_device_id at91rm9200_st_timer_ids[] = { { .compatible = "atmel,at91rm9200-st" }, { /* sentinel */ } @@ -219,28 +218,6 @@ node_err: err: return -EINVAL; } -#else -static int __init of_at91rm9200_st_init(void) -{ - return -EINVAL; -} -#endif - -void __init at91rm9200_ioremap_st(u32 addr) -{ -#ifdef CONFIG_OF - struct device_node *np; - - np = of_find_matching_node(NULL, at91rm9200_st_timer_ids); - if (np) { - of_node_put(np); - return; - } -#endif - at91_st_base = ioremap(addr, 256); - if (!at91_st_base) - panic("Impossible to ioremap ST\n"); -} /* * ST (system timer) module supports both clockevents and clocksource. diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index aab1f969a7c..78137c24d90 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -10,305 +10,13 @@ * */ -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/clk/at91_pmc.h> - -#include <asm/proc-fns.h> -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/cpu.h> #include <mach/at91_dbgu.h> -#include <mach/at91sam9260.h> #include <mach/hardware.h> -#include "at91_aic.h" #include "soc.h" #include "generic.h" -#include "sam9_smc.h" -#include "pm.h" - -#if defined(CONFIG_OLD_CLK_AT91) -#include "clock.h" -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk pioA_clk = { - .name = "pioA_clk", - .pmc_mask = 1 << AT91SAM9260_ID_PIOA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioB_clk = { - .name = "pioB_clk", - .pmc_mask = 1 << AT91SAM9260_ID_PIOB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioC_clk = { - .name = "pioC_clk", - .pmc_mask = 1 << AT91SAM9260_ID_PIOC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk adc_clk = { - .name = "adc_clk", - .pmc_mask = 1 << AT91SAM9260_ID_ADC, - .type = CLK_TYPE_PERIPHERAL, -}; - -static struct clk adc_op_clk = { - .name = "adc_op_clk", - .type = CLK_TYPE_PERIPHERAL, - .rate_hz = 5000000, -}; - -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT91SAM9260_ID_US0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT91SAM9260_ID_US1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT91SAM9260_ID_US2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc_clk = { - .name = "mci_clk", - .pmc_mask = 1 << AT91SAM9260_ID_MCI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udc_clk = { - .name = "udc_clk", - .pmc_mask = 1 << AT91SAM9260_ID_UDP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi_clk = { - .name = "twi_clk", - .pmc_mask = 1 << AT91SAM9260_ID_TWI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pmc_mask = 1 << AT91SAM9260_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pmc_mask = 1 << AT91SAM9260_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc_clk = { - .name = "ssc_clk", - .pmc_mask = 1 << AT91SAM9260_ID_SSC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc0_clk = { - .name = "tc0_clk", - .pmc_mask = 1 << AT91SAM9260_ID_TC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc1_clk = { - .name = "tc1_clk", - .pmc_mask = 1 << AT91SAM9260_ID_TC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc2_clk = { - .name = "tc2_clk", - .pmc_mask = 1 << AT91SAM9260_ID_TC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 1 << AT91SAM9260_ID_UHP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk macb_clk = { - .name = "pclk", - .pmc_mask = 1 << AT91SAM9260_ID_EMAC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk isi_clk = { - .name = "isi_clk", - .pmc_mask = 1 << AT91SAM9260_ID_ISI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart3_clk = { - .name = "usart3_clk", - .pmc_mask = 1 << AT91SAM9260_ID_US3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart4_clk = { - .name = "usart4_clk", - .pmc_mask = 1 << AT91SAM9260_ID_US4, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart5_clk = { - .name = "usart5_clk", - .pmc_mask = 1 << AT91SAM9260_ID_US5, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc3_clk = { - .name = "tc3_clk", - .pmc_mask = 1 << AT91SAM9260_ID_TC3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc4_clk = { - .name = "tc4_clk", - .pmc_mask = 1 << AT91SAM9260_ID_TC4, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc5_clk = { - .name = "tc5_clk", - .pmc_mask = 1 << AT91SAM9260_ID_TC5, - .type = CLK_TYPE_PERIPHERAL, -}; - -static struct clk *periph_clocks[] __initdata = { - &pioA_clk, - &pioB_clk, - &pioC_clk, - &adc_clk, - &adc_op_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &mmc_clk, - &udc_clk, - &twi_clk, - &spi0_clk, - &spi1_clk, - &ssc_clk, - &tc0_clk, - &tc1_clk, - &tc2_clk, - &ohci_clk, - &macb_clk, - &isi_clk, - &usart3_clk, - &usart4_clk, - &usart5_clk, - &tc3_clk, - &tc4_clk, - &tc5_clk, - // irq0 .. irq2 -}; - -static struct clk_lookup periph_clocks_lookups[] = { - /* One additional fake clock for macb_hclk */ - CLKDEV_CON_ID("hclk", &macb_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), - CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), - CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), - CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), - CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc_clk), - CLKDEV_CON_DEV_ID("pclk", "fffbc000.ssc", &ssc_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk), - /* more usart lookup table for DT entries */ - CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), - CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "fffb4000.serial", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "fffb8000.serial", &usart2_clk), - CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk), - CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk), - CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk), - CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk), - /* more tc lookup table for DT entries */ - CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), - CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk), - CLKDEV_CON_DEV_ID("t0_clk", "fffdc000.timer", &tc3_clk), - CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk), - CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk), - CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk), - CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk), - CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk), - /* fake hclk clock */ - CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), - CLKDEV_CON_ID("pioA", &pioA_clk), - CLKDEV_CON_ID("pioB", &pioB_clk), - CLKDEV_CON_ID("pioC", &pioC_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), -}; - -static struct clk_lookup usart_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.5", &usart4_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.6", &usart5_clk), -}; - -/* - * The two programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; - -static void __init at91sam9260_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clkdev_add_table(periph_clocks_lookups, - ARRAY_SIZE(periph_clocks_lookups)); - clkdev_add_table(usart_clocks_lookups, - ARRAY_SIZE(usart_clocks_lookups)); - - clk_register(&pck0); - clk_register(&pck1); -} -#else -#define at91sam9260_register_clocks NULL -#endif - -/* -------------------------------------------------------------------- - * GPIO - * -------------------------------------------------------------------- */ - -static struct at91_gpio_bank at91sam9260_gpio[] __initdata = { - { - .id = AT91SAM9260_ID_PIOA, - .regbase = AT91SAM9260_BASE_PIOA, - }, { - .id = AT91SAM9260_ID_PIOB, - .regbase = AT91SAM9260_BASE_PIOB, - }, { - .id = AT91SAM9260_ID_PIOC, - .regbase = AT91SAM9260_BASE_PIOC, - } -}; /* -------------------------------------------------------------------- * AT91SAM9260 processor initialization @@ -340,119 +48,14 @@ static void __init at91sam9260_map_io(void) at91_init_sram(0, AT91SAM9260_SRAM_BASE, AT91SAM9260_SRAM_SIZE); } -static void __init at91sam9260_ioremap_registers(void) -{ - at91_ioremap_ramc(0, AT91SAM9260_BASE_SDRAMC, 512); - at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT); - at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC); - at91_ioremap_matrix(AT91SAM9260_BASE_MATRIX); - at91_pm_set_standby(at91sam9_sdram_standby); -} - static void __init at91sam9260_initialize(void) { arm_pm_idle = at91sam9_idle; at91_sysirq_mask_rtt(AT91SAM9260_BASE_RTT); - - /* Register GPIO subsystem */ - at91_gpio_init(at91sam9260_gpio, 3); -} - -static struct resource rstc_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_RSTC, - .end = AT91SAM9260_BASE_RSTC + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91SAM9260_BASE_SDRAMC, - .end = AT91SAM9260_BASE_SDRAMC + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device rstc_device = { - .name = "at91-sam9260-reset", - .resource = rstc_resources, - .num_resources = ARRAY_SIZE(rstc_resources), -}; - -static struct resource shdwc_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_SHDWC, - .end = AT91SAM9260_BASE_SHDWC + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device shdwc_device = { - .name = "at91-poweroff", - .resource = shdwc_resources, - .num_resources = ARRAY_SIZE(shdwc_resources), -}; - -static void __init at91sam9260_register_devices(void) -{ - platform_device_register(&rstc_device); - platform_device_register(&shdwc_device); -} - -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller */ - 7, /* System Peripherals */ - 1, /* Parallel IO Controller A */ - 1, /* Parallel IO Controller B */ - 1, /* Parallel IO Controller C */ - 0, /* Analog-to-Digital Converter */ - 5, /* USART 0 */ - 5, /* USART 1 */ - 5, /* USART 2 */ - 0, /* Multimedia Card Interface */ - 2, /* USB Device Port */ - 6, /* Two-Wire Interface */ - 5, /* Serial Peripheral Interface 0 */ - 5, /* Serial Peripheral Interface 1 */ - 5, /* Serial Synchronous Controller */ - 0, - 0, - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ - 2, /* USB Host port */ - 3, /* Ethernet */ - 0, /* Image Sensor Interface */ - 5, /* USART 3 */ - 5, /* USART 4 */ - 5, /* USART 5 */ - 0, /* Timer Counter 3 */ - 0, /* Timer Counter 4 */ - 0, /* Timer Counter 5 */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ -}; - -static void __init at91sam9260_init_time(void) -{ - at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); } AT91_SOC_START(at91sam9260) .map_io = at91sam9260_map_io, - .default_irq_priority = at91sam9260_default_irq_priority, - .extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) - | (1 << AT91SAM9260_ID_IRQ2), - .ioremap_registers = at91sam9260_ioremap_registers, - .register_clocks = at91sam9260_register_clocks, - .register_devices = at91sam9260_register_devices, .init = at91sam9260_initialize, - .init_time = at91sam9260_init_time, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c deleted file mode 100644 index ef88e0fe4e8..00000000000 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ /dev/null @@ -1,1364 +0,0 @@ -/* - * arch/arm/mach-at91/at91sam9260_devices.c - * - * Copyright (C) 2006 Atmel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/i2c-gpio.h> - -#include <linux/platform_data/at91_adc.h> - -#include <mach/cpu.h> -#include <mach/at91sam9260.h> -#include <mach/at91sam9260_matrix.h> -#include <mach/at91_matrix.h> -#include <mach/at91sam9_smc.h> -#include <mach/hardware.h> - -#include "board.h" -#include "generic.h" -#include "gpio.h" - -/* -------------------------------------------------------------------- - * USB Host - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = DMA_BIT_MASK(32); -static struct at91_usbh_data usbh_data; - -static struct resource usbh_resources[] = { - [0] = { - .start = AT91SAM9260_UHP_BASE, - .end = AT91SAM9260_UHP_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_usbh_device = { - .name = "at91_ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, - .num_resources = ARRAY_SIZE(usbh_resources), -}; - -void __init at91_add_device_usbh(struct at91_usbh_data *data) -{ - int i; - - if (!data) - return; - - /* Enable overcurrent notification */ - for (i = 0; i < data->ports; i++) { - if (gpio_is_valid(data->overcurrent_pin[i])) - at91_set_gpio_input(data->overcurrent_pin[i], 1); - } - - usbh_data = *data; - platform_device_register(&at91_usbh_device); -} -#else -void __init at91_add_device_usbh(struct at91_usbh_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * USB Device (Gadget) - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) -static struct at91_udc_data udc_data; - -static struct resource udc_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_UDP, - .end = AT91SAM9260_BASE_UDP + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_udc_device = { - .name = "at91_udc", - .id = -1, - .dev = { - .platform_data = &udc_data, - }, - .resource = udc_resources, - .num_resources = ARRAY_SIZE(udc_resources), -}; - -void __init at91_add_device_udc(struct at91_udc_data *data) -{ - if (!data) - return; - - if (gpio_is_valid(data->vbus_pin)) { - at91_set_gpio_input(data->vbus_pin, 0); - at91_set_deglitch(data->vbus_pin, 1); - } - - /* Pullup pin is handled internally by USB device peripheral */ - - udc_data = *data; - platform_device_register(&at91_udc_device); -} -#else -void __init at91_add_device_udc(struct at91_udc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Ethernet - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct macb_platform_data eth_data; - -static struct resource eth_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_EMAC, - .end = AT91SAM9260_BASE_EMAC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_eth_device = { - .name = "macb", - .id = -1, - .dev = { - .dma_mask = ð_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = ð_data, - }, - .resource = eth_resources, - .num_resources = ARRAY_SIZE(eth_resources), -}; - -void __init at91_add_device_eth(struct macb_platform_data *data) -{ - if (!data) - return; - - if (gpio_is_valid(data->phy_irq_pin)) { - at91_set_gpio_input(data->phy_irq_pin, 0); - at91_set_deglitch(data->phy_irq_pin, 1); - } - - /* Pins used for MII and RMII */ - at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */ - at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ - at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */ - - if (!data->is_rmii) { - at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */ - at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */ - at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ - at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ - at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ - at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */ - at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */ - at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */ - } - - eth_data = *data; - platform_device_register(&at91sam9260_eth_device); -} -#else -void __init at91_add_device_eth(struct macb_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * MMC / SD Slot for Atmel MCI Driver - * -------------------------------------------------------------------- */ - -#if IS_ENABLED(CONFIG_MMC_ATMELMCI) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct mci_platform_data mmc_data; - -static struct resource mmc_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_MCI, - .end = AT91SAM9260_BASE_MCI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_mmc_device = { - .name = "atmel_mci", - .id = -1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc_data, - }, - .resource = mmc_resources, - .num_resources = ARRAY_SIZE(mmc_resources), -}; - -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) -{ - unsigned int i; - unsigned int slot_count = 0; - - if (!data) - return; - - for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { - if (data->slot[i].bus_width) { - /* input/irq */ - if (gpio_is_valid(data->slot[i].detect_pin)) { - at91_set_gpio_input(data->slot[i].detect_pin, 1); - at91_set_deglitch(data->slot[i].detect_pin, 1); - } - if (gpio_is_valid(data->slot[i].wp_pin)) - at91_set_gpio_input(data->slot[i].wp_pin, 1); - - switch (i) { - case 0: - /* CMD */ - at91_set_A_periph(AT91_PIN_PA7, 1); - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA6, 1); - if (data->slot[i].bus_width == 4) { - at91_set_A_periph(AT91_PIN_PA9, 1); - at91_set_A_periph(AT91_PIN_PA10, 1); - at91_set_A_periph(AT91_PIN_PA11, 1); - } - slot_count++; - break; - case 1: - /* CMD */ - at91_set_B_periph(AT91_PIN_PA1, 1); - /* DAT0, maybe DAT1..DAT3 */ - at91_set_B_periph(AT91_PIN_PA0, 1); - if (data->slot[i].bus_width == 4) { - at91_set_B_periph(AT91_PIN_PA5, 1); - at91_set_B_periph(AT91_PIN_PA4, 1); - at91_set_B_periph(AT91_PIN_PA3, 1); - } - slot_count++; - break; - default: - printk(KERN_ERR - "AT91: SD/MMC slot %d not available\n", i); - break; - } - } - } - - if (slot_count) { - /* CLK */ - at91_set_A_periph(AT91_PIN_PA8, 0); - - mmc_data = *data; - platform_device_register(&at91sam9260_mmc_device); - } -} -#else -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * NAND / SmartMedia - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) -static struct atmel_nand_data nand_data; - -#define NAND_BASE AT91_CHIPSELECT_3 - -static struct resource nand_resources[] = { - [0] = { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91SAM9260_BASE_ECC, - .end = AT91SAM9260_BASE_ECC + SZ_512 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91sam9260_nand_device = { - .name = "atmel_nand", - .id = -1, - .dev = { - .platform_data = &nand_data, - }, - .resource = nand_resources, - .num_resources = ARRAY_SIZE(nand_resources), -}; - -void __init at91_add_device_nand(struct atmel_nand_data *data) -{ - unsigned long csa; - - if (!data) - return; - - csa = at91_matrix_read(AT91_MATRIX_EBICSA); - at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); - - /* enable pin */ - if (gpio_is_valid(data->enable_pin)) - at91_set_gpio_output(data->enable_pin, 1); - - /* ready/busy pin */ - if (gpio_is_valid(data->rdy_pin)) - at91_set_gpio_input(data->rdy_pin, 1); - - /* card detect pin */ - if (gpio_is_valid(data->det_pin)) - at91_set_gpio_input(data->det_pin, 1); - - nand_data = *data; - platform_device_register(&at91sam9260_nand_device); -} -#else -void __init at91_add_device_nand(struct atmel_nand_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * TWI (i2c) - * -------------------------------------------------------------------- */ - -/* - * Prefer the GPIO code since the TWI controller isn't robust - * (gets overruns and underruns under load) and can only issue - * repeated STARTs in one scenario (the driver doesn't yet handle them). - */ - -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = AT91_PIN_PA23, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PA24, - .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ -}; - -static struct platform_device at91sam9260_twi_device = { - .name = "i2c-gpio", - .id = 0, - .dev.platform_data = &pdata, -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - at91_set_GPIO_periph(AT91_PIN_PA23, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PA23, 1); - - at91_set_GPIO_periph(AT91_PIN_PA24, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PA24, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91sam9260_twi_device); -} - -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) - -static struct resource twi_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_TWI, - .end = AT91SAM9260_BASE_TWI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_twi_device = { - .id = 0, - .resource = twi_resources, - .num_resources = ARRAY_SIZE(twi_resources), -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - /* IP version is not the same on 9260 and g20 */ - if (cpu_is_at91sam9g20()) { - at91sam9260_twi_device.name = "i2c-at91sam9g20"; - } else { - at91sam9260_twi_device.name = "i2c-at91sam9260"; - } - - /* pins used for TWI interface */ - at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PA23, 1); - - at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PA24, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91sam9260_twi_device); -} -#else -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * SPI - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = DMA_BIT_MASK(32); - -static struct resource spi0_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_SPI0, - .end = AT91SAM9260_BASE_SPI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_spi0_device = { - .name = "atmel_spi", - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -}; - -static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PC11, AT91_PIN_PC16, AT91_PIN_PC17 }; - -static struct resource spi1_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_SPI1, - .end = AT91SAM9260_BASE_SPI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_spi1_device = { - .name = "atmel_spi", - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -}; - -static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 }; - -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -{ - int i; - unsigned long cs_pin; - short enable_spi0 = 0; - short enable_spi1 = 0; - - /* Choose SPI chip-selects */ - for (i = 0; i < nr_devices; i++) { - if (devices[i].controller_data) - cs_pin = (unsigned long) devices[i].controller_data; - else if (devices[i].bus_num == 0) - cs_pin = spi0_standard_cs[devices[i].chip_select]; - else - cs_pin = spi1_standard_cs[devices[i].chip_select]; - - if (!gpio_is_valid(cs_pin)) - continue; - - if (devices[i].bus_num == 0) - enable_spi0 = 1; - else - enable_spi1 = 1; - - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; - } - - spi_register_board_info(devices, nr_devices); - - /* Configure SPI bus(es) */ - if (enable_spi0) { - at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */ - - platform_device_register(&at91sam9260_spi0_device); - } - if (enable_spi1) { - at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI1_MISO */ - at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */ - at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */ - - platform_device_register(&at91sam9260_spi1_device); - } -} -#else -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * Timer/Counter blocks - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_ATMEL_TCLIB - -static struct resource tcb0_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_TCB0, - .end = AT91SAM9260_BASE_TCB0 + SZ_256 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_tcb0_device = { - .name = "atmel_tcb", - .id = 0, - .resource = tcb0_resources, - .num_resources = ARRAY_SIZE(tcb0_resources), -}; - -static struct resource tcb1_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_TCB1, - .end = AT91SAM9260_BASE_TCB1 + SZ_256 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_tcb1_device = { - .name = "atmel_tcb", - .id = 1, - .resource = tcb1_resources, - .num_resources = ARRAY_SIZE(tcb1_resources), -}; - -static void __init at91_add_device_tc(void) -{ - platform_device_register(&at91sam9260_tcb0_device); - platform_device_register(&at91sam9260_tcb1_device); -} -#else -static void __init at91_add_device_tc(void) { } -#endif - - -/* -------------------------------------------------------------------- - * RTT - * -------------------------------------------------------------------- */ - -static struct resource rtt_resources[] = { - { - .start = AT91SAM9260_BASE_RTT, - .end = AT91SAM9260_BASE_RTT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_rtt_device = { - .name = "at91_rtt", - .id = 0, - .resource = rtt_resources, -}; - - -#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) -static void __init at91_add_device_rtt_rtc(void) -{ - at91sam9260_rtt_device.name = "rtc-at91sam9"; - /* - * The second resource is needed: - * GPBR will serve as the storage for RTC time offset - */ - at91sam9260_rtt_device.num_resources = 3; - rtt_resources[1].start = AT91SAM9260_BASE_GPBR + - 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; - rtt_resources[1].end = rtt_resources[1].start + 3; - rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; - rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; -} -#else -static void __init at91_add_device_rtt_rtc(void) -{ - /* Only one resource is needed: RTT not used as RTC */ - at91sam9260_rtt_device.num_resources = 1; -} -#endif - -static void __init at91_add_device_rtt(void) -{ - at91_add_device_rtt_rtc(); - platform_device_register(&at91sam9260_rtt_device); -} - - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) -static struct resource wdt_resources[] = { - { - .start = AT91SAM9260_BASE_WDT, - .end = AT91SAM9260_BASE_WDT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91sam9260_wdt_device = { - .name = "at91_wdt", - .id = -1, - .resource = wdt_resources, - .num_resources = ARRAY_SIZE(wdt_resources), -}; - -static void __init at91_add_device_watchdog(void) -{ - platform_device_register(&at91sam9260_wdt_device); -} -#else -static void __init at91_add_device_watchdog(void) {} -#endif - - -/* -------------------------------------------------------------------- - * SSC -- Synchronous Serial Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) -static u64 ssc_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_SSC, - .end = AT91SAM9260_BASE_SSC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_ssc_device = { - .name = "at91rm9200_ssc", - .id = 0, - .dev = { - .dma_mask = &ssc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc_resources, - .num_resources = ARRAY_SIZE(ssc_resources), -}; - -static inline void configure_ssc_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PB17, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PB16, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PB18, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PB19, 1); - if (pins & ATMEL_SSC_RK) - at91_set_A_periph(AT91_PIN_PB20, 1); - if (pins & ATMEL_SSC_RF) - at91_set_A_periph(AT91_PIN_PB21, 1); -} - -/* - * SSC controllers are accessed through library code, instead of any - * kind of all-singing/all-dancing driver. For example one could be - * used by a particular I2S audio codec's driver, while another one - * on the same system might be used by a custom data capture driver. - */ -void __init at91_add_device_ssc(unsigned id, unsigned pins) -{ - struct platform_device *pdev; - - /* - * NOTE: caller is responsible for passing information matching - * "pins" to whatever will be using each particular controller. - */ - switch (id) { - case AT91SAM9260_ID_SSC: - pdev = &at91sam9260_ssc_device; - configure_ssc_pins(pins); - break; - default: - return; - } - - platform_device_register(pdev); -} - -#else -void __init at91_add_device_ssc(unsigned id, unsigned pins) {} -#endif - - -/* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ -#if defined(CONFIG_SERIAL_ATMEL) -static struct resource dbgu_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_DBGU, - .end = AT91SAM9260_BASE_DBGU + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91_ID_SYS, - .end = NR_IRQS_LEGACY + AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data dbgu_data = { - .use_dma_tx = 0, - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ -}; - -static u64 dbgu_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9260_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { - .dma_mask = &dbgu_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -}; - -static inline void configure_dbgu_pins(void) -{ - at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */ - at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */ -} - -static struct resource uart0_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_US0, - .end = AT91SAM9260_BASE_US0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US0, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart0_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart0_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9260_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { - .dma_mask = &uart0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), -}; - -static inline void configure_usart0_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */ - if (pins & ATMEL_UART_DTR) - at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */ - if (pins & ATMEL_UART_DSR) - at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */ - if (pins & ATMEL_UART_DCD) - at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */ - if (pins & ATMEL_UART_RI) - at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */ -} - -static struct resource uart1_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_US1, - .end = AT91SAM9260_BASE_US1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US1, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart1_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart1_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9260_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { - .dma_mask = &uart1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), -}; - -static inline void configure_usart1_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */ -} - -static struct resource uart2_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_US2, - .end = AT91SAM9260_BASE_US2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US2, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart2_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart2_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9260_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { - .dma_mask = &uart2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), -}; - -static inline void configure_usart2_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PA4, 0); /* RTS2 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */ -} - -static struct resource uart3_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_US3, - .end = AT91SAM9260_BASE_US3 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US3, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US3, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart3_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart3_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9260_uart3_device = { - .name = "atmel_usart", - .id = 4, - .dev = { - .dma_mask = &uart3_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart3_data, - }, - .resource = uart3_resources, - .num_resources = ARRAY_SIZE(uart3_resources), -}; - -static inline void configure_usart3_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */ - at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PC8, 0); /* RTS3 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */ -} - -static struct resource uart4_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_US4, - .end = AT91SAM9260_BASE_US4 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US4, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US4, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart4_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart4_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9260_uart4_device = { - .name = "atmel_usart", - .id = 5, - .dev = { - .dma_mask = &uart4_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart4_data, - }, - .resource = uart4_resources, - .num_resources = ARRAY_SIZE(uart4_resources), -}; - -static inline void configure_usart4_pins(void) -{ - at91_set_B_periph(AT91_PIN_PA31, 1); /* TXD4 */ - at91_set_B_periph(AT91_PIN_PA30, 0); /* RXD4 */ -} - -static struct resource uart5_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_US5, - .end = AT91SAM9260_BASE_US5 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US5, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US5, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart5_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart5_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9260_uart5_device = { - .name = "atmel_usart", - .id = 6, - .dev = { - .dma_mask = &uart5_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart5_data, - }, - .resource = uart5_resources, - .num_resources = ARRAY_SIZE(uart5_resources), -}; - -static inline void configure_usart5_pins(void) -{ - at91_set_A_periph(AT91_PIN_PB12, 1); /* TXD5 */ - at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */ -} - -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ - -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -{ - struct platform_device *pdev; - struct atmel_uart_data *pdata; - - switch (id) { - case 0: /* DBGU */ - pdev = &at91sam9260_dbgu_device; - configure_dbgu_pins(); - break; - case AT91SAM9260_ID_US0: - pdev = &at91sam9260_uart0_device; - configure_usart0_pins(pins); - break; - case AT91SAM9260_ID_US1: - pdev = &at91sam9260_uart1_device; - configure_usart1_pins(pins); - break; - case AT91SAM9260_ID_US2: - pdev = &at91sam9260_uart2_device; - configure_usart2_pins(pins); - break; - case AT91SAM9260_ID_US3: - pdev = &at91sam9260_uart3_device; - configure_usart3_pins(pins); - break; - case AT91SAM9260_ID_US4: - pdev = &at91sam9260_uart4_device; - configure_usart4_pins(); - break; - case AT91SAM9260_ID_US5: - pdev = &at91sam9260_uart5_device; - configure_usart5_pins(); - break; - default: - return; - } - pdata = pdev->dev.platform_data; - pdata->num = portnr; /* update to mapped ID */ - - if (portnr < ATMEL_MAX_UART) - at91_uarts[portnr] = pdev; -} - -void __init at91_add_device_serial(void) -{ - int i; - - for (i = 0; i < ATMEL_MAX_UART; i++) { - if (at91_uarts[i]) - platform_device_register(at91_uarts[i]); - } -} -#else -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_add_device_serial(void) {} -#endif - -/* -------------------------------------------------------------------- - * CF/IDE - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ - defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) - -static struct at91_cf_data cf0_data; - -static struct resource cf0_resources[] = { - [0] = { - .start = AT91_CHIPSELECT_4, - .end = AT91_CHIPSELECT_4 + SZ_256M - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device cf0_device = { - .id = 0, - .dev = { - .platform_data = &cf0_data, - }, - .resource = cf0_resources, - .num_resources = ARRAY_SIZE(cf0_resources), -}; - -static struct at91_cf_data cf1_data; - -static struct resource cf1_resources[] = { - [0] = { - .start = AT91_CHIPSELECT_5, - .end = AT91_CHIPSELECT_5 + SZ_256M - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device cf1_device = { - .id = 1, - .dev = { - .platform_data = &cf1_data, - }, - .resource = cf1_resources, - .num_resources = ARRAY_SIZE(cf1_resources), -}; - -void __init at91_add_device_cf(struct at91_cf_data *data) -{ - struct platform_device *pdev; - unsigned long csa; - - if (!data) - return; - - csa = at91_matrix_read(AT91_MATRIX_EBICSA); - - switch (data->chipselect) { - case 4: - at91_set_multi_drive(AT91_PIN_PC8, 0); - at91_set_A_periph(AT91_PIN_PC8, 0); - csa |= AT91_MATRIX_CS4A_SMC_CF1; - cf0_data = *data; - pdev = &cf0_device; - break; - case 5: - at91_set_multi_drive(AT91_PIN_PC9, 0); - at91_set_A_periph(AT91_PIN_PC9, 0); - csa |= AT91_MATRIX_CS5A_SMC_CF2; - cf1_data = *data; - pdev = &cf1_device; - break; - default: - printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n", - data->chipselect); - return; - } - - at91_matrix_write(AT91_MATRIX_EBICSA, csa); - - if (gpio_is_valid(data->rst_pin)) { - at91_set_multi_drive(data->rst_pin, 0); - at91_set_gpio_output(data->rst_pin, 1); - } - - if (gpio_is_valid(data->irq_pin)) { - at91_set_gpio_input(data->irq_pin, 0); - at91_set_deglitch(data->irq_pin, 1); - } - - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 0); - at91_set_deglitch(data->det_pin, 1); - } - - at91_set_B_periph(AT91_PIN_PC6, 0); /* CFCE1 */ - at91_set_B_periph(AT91_PIN_PC7, 0); /* CFCE2 */ - at91_set_A_periph(AT91_PIN_PC10, 0); /* CFRNW */ - at91_set_A_periph(AT91_PIN_PC15, 1); /* NWAIT */ - - if (IS_ENABLED(CONFIG_PATA_AT91) && (data->flags & AT91_CF_TRUE_IDE)) - pdev->name = "pata_at91"; - else - pdev->name = "at91_cf"; - - platform_device_register(pdev); -} - -#else -void __init at91_add_device_cf(struct at91_cf_data * data) {} -#endif - -/* -------------------------------------------------------------------- - * ADCs - * -------------------------------------------------------------------- */ - -#if IS_ENABLED(CONFIG_AT91_ADC) -static struct at91_adc_data adc_data; - -static struct resource adc_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_ADC, - .end = AT91SAM9260_BASE_ADC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_adc_device = { - .name = "at91sam9260-adc", - .id = -1, - .dev = { - .platform_data = &adc_data, - }, - .resource = adc_resources, - .num_resources = ARRAY_SIZE(adc_resources), -}; - -static struct at91_adc_trigger at91_adc_triggers[] = { - [0] = { - .name = "timer-counter-0", - .value = 0x1, - }, - [1] = { - .name = "timer-counter-1", - .value = 0x3, - }, - [2] = { - .name = "timer-counter-2", - .value = 0x5, - }, - [3] = { - .name = "external", - .value = 0xd, - .is_external = true, - }, -}; - -void __init at91_add_device_adc(struct at91_adc_data *data) -{ - if (!data) - return; - - if (test_bit(0, &data->channels_used)) - at91_set_A_periph(AT91_PIN_PC0, 0); - if (test_bit(1, &data->channels_used)) - at91_set_A_periph(AT91_PIN_PC1, 0); - if (test_bit(2, &data->channels_used)) - at91_set_A_periph(AT91_PIN_PC2, 0); - if (test_bit(3, &data->channels_used)) - at91_set_A_periph(AT91_PIN_PC3, 0); - - if (data->use_external_triggers) - at91_set_A_periph(AT91_PIN_PA22, 0); - - data->startup_time = 10; - data->trigger_number = 4; - data->trigger_list = at91_adc_triggers; - - adc_data = *data; - platform_device_register(&at91_adc_device); -} -#else -void __init at91_add_device_adc(struct at91_adc_data *data) {} -#endif - -/* -------------------------------------------------------------------- */ -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init at91_add_standard_devices(void) -{ - if (of_have_populated_dt()) - return 0; - - at91_add_device_rtt(); - at91_add_device_watchdog(); - at91_add_device_tc(); - return 0; -} - -arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index a8bd3596333..d29953ecb0c 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -10,282 +10,12 @@ * */ -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/clk/at91_pmc.h> - -#include <asm/proc-fns.h> -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/cpu.h> -#include <mach/at91sam9261.h> #include <mach/hardware.h> -#include "at91_aic.h" #include "soc.h" #include "generic.h" -#include "sam9_smc.h" -#include "pm.h" - -#if defined(CONFIG_OLD_CLK_AT91) -#include "clock.h" - -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk pioA_clk = { - .name = "pioA_clk", - .pmc_mask = 1 << AT91SAM9261_ID_PIOA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioB_clk = { - .name = "pioB_clk", - .pmc_mask = 1 << AT91SAM9261_ID_PIOB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioC_clk = { - .name = "pioC_clk", - .pmc_mask = 1 << AT91SAM9261_ID_PIOC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT91SAM9261_ID_US0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT91SAM9261_ID_US1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT91SAM9261_ID_US2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc_clk = { - .name = "mci_clk", - .pmc_mask = 1 << AT91SAM9261_ID_MCI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udc_clk = { - .name = "udc_clk", - .pmc_mask = 1 << AT91SAM9261_ID_UDP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi_clk = { - .name = "twi_clk", - .pmc_mask = 1 << AT91SAM9261_ID_TWI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pmc_mask = 1 << AT91SAM9261_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pmc_mask = 1 << AT91SAM9261_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc0_clk = { - .name = "ssc0_clk", - .pmc_mask = 1 << AT91SAM9261_ID_SSC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc1_clk = { - .name = "ssc1_clk", - .pmc_mask = 1 << AT91SAM9261_ID_SSC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc2_clk = { - .name = "ssc2_clk", - .pmc_mask = 1 << AT91SAM9261_ID_SSC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc0_clk = { - .name = "tc0_clk", - .pmc_mask = 1 << AT91SAM9261_ID_TC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc1_clk = { - .name = "tc1_clk", - .pmc_mask = 1 << AT91SAM9261_ID_TC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc2_clk = { - .name = "tc2_clk", - .pmc_mask = 1 << AT91SAM9261_ID_TC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 1 << AT91SAM9261_ID_UHP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk lcdc_clk = { - .name = "lcdc_clk", - .pmc_mask = 1 << AT91SAM9261_ID_LCDC, - .type = CLK_TYPE_PERIPHERAL, -}; - -/* HClocks */ -static struct clk hck0 = { - .name = "hck0", - .pmc_mask = AT91_PMC_HCK0, - .type = CLK_TYPE_SYSTEM, - .id = 0, -}; -static struct clk hck1 = { - .name = "hck1", - .pmc_mask = AT91_PMC_HCK1, - .type = CLK_TYPE_SYSTEM, - .id = 1, -}; - -static struct clk *periph_clocks[] __initdata = { - &pioA_clk, - &pioB_clk, - &pioC_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &mmc_clk, - &udc_clk, - &twi_clk, - &spi0_clk, - &spi1_clk, - &ssc0_clk, - &ssc1_clk, - &ssc2_clk, - &tc0_clk, - &tc1_clk, - &tc2_clk, - &ohci_clk, - &lcdc_clk, - // irq0 .. irq2 -}; - -static struct clk_lookup periph_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("hclk", "at91sam9261-lcdfb.0", &hck1), - CLKDEV_CON_DEV_ID("hclk", "at91sam9g10-lcdfb.0", &hck1), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), - CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), - CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk), - CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.2", &ssc2_clk), - CLKDEV_CON_DEV_ID("pclk", "fffbc000.ssc", &ssc0_clk), - CLKDEV_CON_DEV_ID("pclk", "fffc0000.ssc", &ssc1_clk), - CLKDEV_CON_DEV_ID("pclk", "fffc4000.ssc", &ssc2_clk), - CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261.0", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi_clk), - CLKDEV_CON_ID("pioA", &pioA_clk), - CLKDEV_CON_ID("pioB", &pioB_clk), - CLKDEV_CON_ID("pioC", &pioC_clk), - /* more lookup table for DT entries */ - CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), - CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk), - CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), - CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk), - CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &hck0), - CLKDEV_CON_DEV_ID("hclk", "600000.fb", &hck1), - CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk), - CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk), - CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), -}; - -static struct clk_lookup usart_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), -}; - -/* - * The four programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; -static struct clk pck2 = { - .name = "pck2", - .pmc_mask = AT91_PMC_PCK2, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 2, -}; -static struct clk pck3 = { - .name = "pck3", - .pmc_mask = AT91_PMC_PCK3, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 3, -}; - -static void __init at91sam9261_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clkdev_add_table(periph_clocks_lookups, - ARRAY_SIZE(periph_clocks_lookups)); - clkdev_add_table(usart_clocks_lookups, - ARRAY_SIZE(usart_clocks_lookups)); - - clk_register(&pck0); - clk_register(&pck1); - clk_register(&pck2); - clk_register(&pck3); - - clk_register(&hck0); - clk_register(&hck1); -} -#else -#define at91sam9261_register_clocks NULL -#endif -/* -------------------------------------------------------------------- - * GPIO - * -------------------------------------------------------------------- */ - -static struct at91_gpio_bank at91sam9261_gpio[] __initdata = { - { - .id = AT91SAM9261_ID_PIOA, - .regbase = AT91SAM9261_BASE_PIOA, - }, { - .id = AT91SAM9261_ID_PIOB, - .regbase = AT91SAM9261_BASE_PIOB, - }, { - .id = AT91SAM9261_ID_PIOC, - .regbase = AT91SAM9261_BASE_PIOC, - } -}; /* -------------------------------------------------------------------- * AT91SAM9261 processor initialization @@ -299,119 +29,14 @@ static void __init at91sam9261_map_io(void) at91_init_sram(0, AT91SAM9261_SRAM_BASE, AT91SAM9261_SRAM_SIZE); } -static void __init at91sam9261_ioremap_registers(void) -{ - at91_ioremap_ramc(0, AT91SAM9261_BASE_SDRAMC, 512); - at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT); - at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC); - at91_ioremap_matrix(AT91SAM9261_BASE_MATRIX); - at91_pm_set_standby(at91sam9_sdram_standby); -} - static void __init at91sam9261_initialize(void) { arm_pm_idle = at91sam9_idle; at91_sysirq_mask_rtt(AT91SAM9261_BASE_RTT); - - /* Register GPIO subsystem */ - at91_gpio_init(at91sam9261_gpio, 3); -} - -static struct resource rstc_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_RSTC, - .end = AT91SAM9261_BASE_RSTC + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91SAM9261_BASE_SDRAMC, - .end = AT91SAM9261_BASE_SDRAMC + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device rstc_device = { - .name = "at91-sam9260-reset", - .resource = rstc_resources, - .num_resources = ARRAY_SIZE(rstc_resources), -}; - -static struct resource shdwc_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_SHDWC, - .end = AT91SAM9261_BASE_SHDWC + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device shdwc_device = { - .name = "at91-poweroff", - .resource = shdwc_resources, - .num_resources = ARRAY_SIZE(shdwc_resources), -}; - -static void __init at91sam9261_register_devices(void) -{ - platform_device_register(&rstc_device); - platform_device_register(&shdwc_device); -} - -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller */ - 7, /* System Peripherals */ - 1, /* Parallel IO Controller A */ - 1, /* Parallel IO Controller B */ - 1, /* Parallel IO Controller C */ - 0, - 5, /* USART 0 */ - 5, /* USART 1 */ - 5, /* USART 2 */ - 0, /* Multimedia Card Interface */ - 2, /* USB Device Port */ - 6, /* Two-Wire Interface */ - 5, /* Serial Peripheral Interface 0 */ - 5, /* Serial Peripheral Interface 1 */ - 4, /* Serial Synchronous Controller 0 */ - 4, /* Serial Synchronous Controller 1 */ - 4, /* Serial Synchronous Controller 2 */ - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ - 2, /* USB Host port */ - 3, /* LCD Controller */ - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ -}; - -static void __init at91sam9261_init_time(void) -{ - at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); } AT91_SOC_START(at91sam9261) .map_io = at91sam9261_map_io, - .default_irq_priority = at91sam9261_default_irq_priority, - .extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) - | (1 << AT91SAM9261_ID_IRQ2), - .ioremap_registers = at91sam9261_ioremap_registers, - .register_clocks = at91sam9261_register_clocks, - .register_devices = at91sam9261_register_devices, .init = at91sam9261_initialize, - .init_time = at91sam9261_init_time, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c deleted file mode 100644 index 29baacb5c35..00000000000 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ /dev/null @@ -1,1098 +0,0 @@ -/* - * arch/arm/mach-at91/at91sam9261_devices.c - * - * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> - * Copyright (C) 2005 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/i2c-gpio.h> - -#include <linux/fb.h> -#include <video/atmel_lcdc.h> - -#include <mach/at91sam9261.h> -#include <mach/at91sam9261_matrix.h> -#include <mach/at91_matrix.h> -#include <mach/at91sam9_smc.h> -#include <mach/hardware.h> - -#include "board.h" -#include "generic.h" -#include "gpio.h" - -/* -------------------------------------------------------------------- - * USB Host - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = DMA_BIT_MASK(32); -static struct at91_usbh_data usbh_data; - -static struct resource usbh_resources[] = { - [0] = { - .start = AT91SAM9261_UHP_BASE, - .end = AT91SAM9261_UHP_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_UHP, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_UHP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_usbh_device = { - .name = "at91_ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, - .num_resources = ARRAY_SIZE(usbh_resources), -}; - -void __init at91_add_device_usbh(struct at91_usbh_data *data) -{ - int i; - - if (!data) - return; - - /* Enable overcurrent notification */ - for (i = 0; i < data->ports; i++) { - if (gpio_is_valid(data->overcurrent_pin[i])) - at91_set_gpio_input(data->overcurrent_pin[i], 1); - } - - usbh_data = *data; - platform_device_register(&at91sam9261_usbh_device); -} -#else -void __init at91_add_device_usbh(struct at91_usbh_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * USB Device (Gadget) - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) -static struct at91_udc_data udc_data; - -static struct resource udc_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_UDP, - .end = AT91SAM9261_BASE_UDP + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_UDP, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_UDP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_udc_device = { - .name = "at91_udc", - .id = -1, - .dev = { - .platform_data = &udc_data, - }, - .resource = udc_resources, - .num_resources = ARRAY_SIZE(udc_resources), -}; - -void __init at91_add_device_udc(struct at91_udc_data *data) -{ - if (!data) - return; - - if (gpio_is_valid(data->vbus_pin)) { - at91_set_gpio_input(data->vbus_pin, 0); - at91_set_deglitch(data->vbus_pin, 1); - } - - /* Pullup pin is handled internally by USB device peripheral */ - - udc_data = *data; - platform_device_register(&at91sam9261_udc_device); -} -#else -void __init at91_add_device_udc(struct at91_udc_data *data) {} -#endif - -/* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if IS_ENABLED(CONFIG_MMC_ATMELMCI) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct mci_platform_data mmc_data; - -static struct resource mmc_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_MCI, - .end = AT91SAM9261_BASE_MCI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_MCI, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_MCI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_mmc_device = { - .name = "atmel_mci", - .id = -1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc_data, - }, - .resource = mmc_resources, - .num_resources = ARRAY_SIZE(mmc_resources), -}; - -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) -{ - if (!data) - return; - - if (data->slot[0].bus_width) { - /* input/irq */ - if (gpio_is_valid(data->slot[0].detect_pin)) { - at91_set_gpio_input(data->slot[0].detect_pin, 1); - at91_set_deglitch(data->slot[0].detect_pin, 1); - } - if (gpio_is_valid(data->slot[0].wp_pin)) - at91_set_gpio_input(data->slot[0].wp_pin, 1); - - /* CLK */ - at91_set_B_periph(AT91_PIN_PA2, 0); - - /* CMD */ - at91_set_B_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_B_periph(AT91_PIN_PA0, 1); - if (data->slot[0].bus_width == 4) { - at91_set_B_periph(AT91_PIN_PA4, 1); - at91_set_B_periph(AT91_PIN_PA5, 1); - at91_set_B_periph(AT91_PIN_PA6, 1); - } - - mmc_data = *data; - platform_device_register(&at91sam9261_mmc_device); - } -} -#else -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * NAND / SmartMedia - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) -static struct atmel_nand_data nand_data; - -#define NAND_BASE AT91_CHIPSELECT_3 - -static struct resource nand_resources[] = { - { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device atmel_nand_device = { - .name = "atmel_nand", - .id = -1, - .dev = { - .platform_data = &nand_data, - }, - .resource = nand_resources, - .num_resources = ARRAY_SIZE(nand_resources), -}; - -void __init at91_add_device_nand(struct atmel_nand_data *data) -{ - unsigned long csa; - - if (!data) - return; - - csa = at91_matrix_read(AT91_MATRIX_EBICSA); - at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); - - /* enable pin */ - if (gpio_is_valid(data->enable_pin)) - at91_set_gpio_output(data->enable_pin, 1); - - /* ready/busy pin */ - if (gpio_is_valid(data->rdy_pin)) - at91_set_gpio_input(data->rdy_pin, 1); - - /* card detect pin */ - if (gpio_is_valid(data->det_pin)) - at91_set_gpio_input(data->det_pin, 1); - - at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */ - at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */ - - nand_data = *data; - platform_device_register(&atmel_nand_device); -} - -#else -void __init at91_add_device_nand(struct atmel_nand_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * TWI (i2c) - * -------------------------------------------------------------------- */ - -/* - * Prefer the GPIO code since the TWI controller isn't robust - * (gets overruns and underruns under load) and can only issue - * repeated STARTs in one scenario (the driver doesn't yet handle them). - */ -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = AT91_PIN_PA7, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PA8, - .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ -}; - -static struct platform_device at91sam9261_twi_device = { - .name = "i2c-gpio", - .id = 0, - .dev.platform_data = &pdata, -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - at91_set_GPIO_periph(AT91_PIN_PA7, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PA7, 1); - - at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PA8, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91sam9261_twi_device); -} - -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) - -static struct resource twi_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_TWI, - .end = AT91SAM9261_BASE_TWI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TWI, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TWI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_twi_device = { - .id = 0, - .resource = twi_resources, - .num_resources = ARRAY_SIZE(twi_resources), -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - /* IP version is not the same on 9261 and g10 */ - if (cpu_is_at91sam9g10()) { - at91sam9261_twi_device.name = "i2c-at91sam9g10"; - /* I2C PIO must not be configured as open-drain on this chip */ - } else { - at91sam9261_twi_device.name = "i2c-at91sam9261"; - at91_set_multi_drive(AT91_PIN_PA7, 1); - at91_set_multi_drive(AT91_PIN_PA8, 1); - } - - /* pins used for TWI interface */ - at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD */ - at91_set_A_periph(AT91_PIN_PA8, 0); /* TWCK */ - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91sam9261_twi_device); -} -#else -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * SPI - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = DMA_BIT_MASK(32); - -static struct resource spi0_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_SPI0, - .end = AT91SAM9261_BASE_SPI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI0, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_spi0_device = { - .name = "atmel_spi", - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -}; - -static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 }; - -static struct resource spi1_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_SPI1, - .end = AT91SAM9261_BASE_SPI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI1, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_spi1_device = { - .name = "atmel_spi", - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -}; - -static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB28, AT91_PIN_PA24, AT91_PIN_PA25, AT91_PIN_PA26 }; - -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -{ - int i; - unsigned long cs_pin; - short enable_spi0 = 0; - short enable_spi1 = 0; - - /* Choose SPI chip-selects */ - for (i = 0; i < nr_devices; i++) { - if (devices[i].controller_data) - cs_pin = (unsigned long) devices[i].controller_data; - else if (devices[i].bus_num == 0) - cs_pin = spi0_standard_cs[devices[i].chip_select]; - else - cs_pin = spi1_standard_cs[devices[i].chip_select]; - - if (!gpio_is_valid(cs_pin)) - continue; - - if (devices[i].bus_num == 0) - enable_spi0 = 1; - else - enable_spi1 = 1; - - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; - } - - spi_register_board_info(devices, nr_devices); - - /* Configure SPI bus(es) */ - if (enable_spi0) { - at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - - platform_device_register(&at91sam9261_spi0_device); - } - if (enable_spi1) { - at91_set_A_periph(AT91_PIN_PB30, 0); /* SPI1_MISO */ - at91_set_A_periph(AT91_PIN_PB31, 0); /* SPI1_MOSI */ - at91_set_A_periph(AT91_PIN_PB29, 0); /* SPI1_SPCK */ - - platform_device_register(&at91sam9261_spi1_device); - } -} -#else -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * LCD Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static u64 lcdc_dmamask = DMA_BIT_MASK(32); -static struct atmel_lcdfb_pdata lcdc_data; - -static struct resource lcdc_resources[] = { - [0] = { - .start = AT91SAM9261_LCDC_BASE, - .end = AT91SAM9261_LCDC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_LCDC, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_LCDC, - .flags = IORESOURCE_IRQ, - }, -#if defined(CONFIG_FB_INTSRAM) - [2] = { - .start = AT91SAM9261_SRAM_BASE, - .end = AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -#endif -}; - -static struct platform_device at91_lcdc_device = { - .id = 0, - .dev = { - .dma_mask = &lcdc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &lcdc_data, - }, - .resource = lcdc_resources, - .num_resources = ARRAY_SIZE(lcdc_resources), -}; - -void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) -{ - if (!data) { - return; - } - - if (cpu_is_at91sam9g10()) - at91_lcdc_device.name = "at91sam9g10-lcdfb"; - else - at91_lcdc_device.name = "at91sam9261-lcdfb"; - -#if defined(CONFIG_FB_ATMEL_STN) - at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */ - at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ - at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ - at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ - at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */ - at91_set_A_periph(AT91_PIN_PB5, 0); /* LCDD0 */ - at91_set_A_periph(AT91_PIN_PB6, 0); /* LCDD1 */ - at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */ - at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */ -#else - at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ - at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ - at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ - at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */ - at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */ - at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */ - at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */ - at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */ - at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */ - at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */ - at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */ - at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */ - at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */ - at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */ - at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */ - at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */ - at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */ - at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */ - at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */ - at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */ - at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */ - at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */ -#endif - - if (ARRAY_SIZE(lcdc_resources) > 2) { - void __iomem *fb; - struct resource *fb_res = &lcdc_resources[2]; - size_t fb_len = resource_size(fb_res); - - fb = ioremap(fb_res->start, fb_len); - if (fb) { - memset(fb, 0, fb_len); - iounmap(fb); - } - } - lcdc_data = *data; - platform_device_register(&at91_lcdc_device); -} -#else -void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Timer/Counter block - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_ATMEL_TCLIB - -static struct resource tcb_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_TCB0, - .end = AT91SAM9261_BASE_TCB0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC0, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC0, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC1, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC1, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC2, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_tcb_device = { - .name = "atmel_tcb", - .id = 0, - .resource = tcb_resources, - .num_resources = ARRAY_SIZE(tcb_resources), -}; - -static void __init at91_add_device_tc(void) -{ - platform_device_register(&at91sam9261_tcb_device); -} -#else -static void __init at91_add_device_tc(void) { } -#endif - - -/* -------------------------------------------------------------------- - * RTT - * -------------------------------------------------------------------- */ - -static struct resource rtt_resources[] = { - { - .start = AT91SAM9261_BASE_RTT, - .end = AT91SAM9261_BASE_RTT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device at91sam9261_rtt_device = { - .name = "at91_rtt", - .id = 0, - .resource = rtt_resources, -}; - -#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) -static void __init at91_add_device_rtt_rtc(void) -{ - at91sam9261_rtt_device.name = "rtc-at91sam9"; - /* - * The second resource is needed: - * GPBR will serve as the storage for RTC time offset - */ - at91sam9261_rtt_device.num_resources = 3; - rtt_resources[1].start = AT91SAM9261_BASE_GPBR + - 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; - rtt_resources[1].end = rtt_resources[1].start + 3; - rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; - rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; -} -#else -static void __init at91_add_device_rtt_rtc(void) -{ - /* Only one resource is needed: RTT not used as RTC */ - at91sam9261_rtt_device.num_resources = 1; -} -#endif - -static void __init at91_add_device_rtt(void) -{ - at91_add_device_rtt_rtc(); - platform_device_register(&at91sam9261_rtt_device); -} - - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) -static struct resource wdt_resources[] = { - { - .start = AT91SAM9261_BASE_WDT, - .end = AT91SAM9261_BASE_WDT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91sam9261_wdt_device = { - .name = "at91_wdt", - .id = -1, - .resource = wdt_resources, - .num_resources = ARRAY_SIZE(wdt_resources), -}; - -static void __init at91_add_device_watchdog(void) -{ - platform_device_register(&at91sam9261_wdt_device); -} -#else -static void __init at91_add_device_watchdog(void) {} -#endif - - -/* -------------------------------------------------------------------- - * SSC -- Synchronous Serial Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) -static u64 ssc0_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc0_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_SSC0, - .end = AT91SAM9261_BASE_SSC0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC0, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_ssc0_device = { - .name = "at91rm9200_ssc", - .id = 0, - .dev = { - .dma_mask = &ssc0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc0_resources, - .num_resources = ARRAY_SIZE(ssc0_resources), -}; - -static inline void configure_ssc0_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PB21, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PB22, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PB23, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PB24, 1); - if (pins & ATMEL_SSC_RK) - at91_set_A_periph(AT91_PIN_PB25, 1); - if (pins & ATMEL_SSC_RF) - at91_set_A_periph(AT91_PIN_PB26, 1); -} - -static u64 ssc1_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc1_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_SSC1, - .end = AT91SAM9261_BASE_SSC1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC1, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_ssc1_device = { - .name = "at91rm9200_ssc", - .id = 1, - .dev = { - .dma_mask = &ssc1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc1_resources, - .num_resources = ARRAY_SIZE(ssc1_resources), -}; - -static inline void configure_ssc1_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_B_periph(AT91_PIN_PA17, 1); - if (pins & ATMEL_SSC_TK) - at91_set_B_periph(AT91_PIN_PA18, 1); - if (pins & ATMEL_SSC_TD) - at91_set_B_periph(AT91_PIN_PA19, 1); - if (pins & ATMEL_SSC_RD) - at91_set_B_periph(AT91_PIN_PA20, 1); - if (pins & ATMEL_SSC_RK) - at91_set_B_periph(AT91_PIN_PA21, 1); - if (pins & ATMEL_SSC_RF) - at91_set_B_periph(AT91_PIN_PA22, 1); -} - -static u64 ssc2_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc2_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_SSC2, - .end = AT91SAM9261_BASE_SSC2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC2, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_ssc2_device = { - .name = "at91rm9200_ssc", - .id = 2, - .dev = { - .dma_mask = &ssc2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc2_resources, - .num_resources = ARRAY_SIZE(ssc2_resources), -}; - -static inline void configure_ssc2_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_B_periph(AT91_PIN_PC25, 1); - if (pins & ATMEL_SSC_TK) - at91_set_B_periph(AT91_PIN_PC26, 1); - if (pins & ATMEL_SSC_TD) - at91_set_B_periph(AT91_PIN_PC27, 1); - if (pins & ATMEL_SSC_RD) - at91_set_B_periph(AT91_PIN_PC28, 1); - if (pins & ATMEL_SSC_RK) - at91_set_B_periph(AT91_PIN_PC29, 1); - if (pins & ATMEL_SSC_RF) - at91_set_B_periph(AT91_PIN_PC30, 1); -} - -/* - * SSC controllers are accessed through library code, instead of any - * kind of all-singing/all-dancing driver. For example one could be - * used by a particular I2S audio codec's driver, while another one - * on the same system might be used by a custom data capture driver. - */ -void __init at91_add_device_ssc(unsigned id, unsigned pins) -{ - struct platform_device *pdev; - - /* - * NOTE: caller is responsible for passing information matching - * "pins" to whatever will be using each particular controller. - */ - switch (id) { - case AT91SAM9261_ID_SSC0: - pdev = &at91sam9261_ssc0_device; - configure_ssc0_pins(pins); - break; - case AT91SAM9261_ID_SSC1: - pdev = &at91sam9261_ssc1_device; - configure_ssc1_pins(pins); - break; - case AT91SAM9261_ID_SSC2: - pdev = &at91sam9261_ssc2_device; - configure_ssc2_pins(pins); - break; - default: - return; - } - - platform_device_register(pdev); -} - -#else -void __init at91_add_device_ssc(unsigned id, unsigned pins) {} -#endif - - -/* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SERIAL_ATMEL) -static struct resource dbgu_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_DBGU, - .end = AT91SAM9261_BASE_DBGU + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91_ID_SYS, - .end = NR_IRQS_LEGACY + AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data dbgu_data = { - .use_dma_tx = 0, - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ -}; - -static u64 dbgu_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9261_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { - .dma_mask = &dbgu_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -}; - -static inline void configure_dbgu_pins(void) -{ - at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */ - at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */ -} - -static struct resource uart0_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_US0, - .end = AT91SAM9261_BASE_US0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US0, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart0_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart0_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9261_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { - .dma_mask = &uart0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), -}; - -static inline void configure_usart0_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */ -} - -static struct resource uart1_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_US1, - .end = AT91SAM9261_BASE_US1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US1, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart1_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart1_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9261_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { - .dma_mask = &uart1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), -}; - -static inline void configure_usart1_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PA12, 0); /* RTS1 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PA13, 0); /* CTS1 */ -} - -static struct resource uart2_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_US2, - .end = AT91SAM9261_BASE_US2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US2, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart2_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart2_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9261_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { - .dma_mask = &uart2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), -}; - -static inline void configure_usart2_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */ - at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PA15, 0); /* RTS2*/ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */ -} - -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ - -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -{ - struct platform_device *pdev; - struct atmel_uart_data *pdata; - - switch (id) { - case 0: /* DBGU */ - pdev = &at91sam9261_dbgu_device; - configure_dbgu_pins(); - break; - case AT91SAM9261_ID_US0: - pdev = &at91sam9261_uart0_device; - configure_usart0_pins(pins); - break; - case AT91SAM9261_ID_US1: - pdev = &at91sam9261_uart1_device; - configure_usart1_pins(pins); - break; - case AT91SAM9261_ID_US2: - pdev = &at91sam9261_uart2_device; - configure_usart2_pins(pins); - break; - default: - return; - } - pdata = pdev->dev.platform_data; - pdata->num = portnr; /* update to mapped ID */ - - if (portnr < ATMEL_MAX_UART) - at91_uarts[portnr] = pdev; -} - -void __init at91_add_device_serial(void) -{ - int i; - - for (i = 0; i < ATMEL_MAX_UART; i++) { - if (at91_uarts[i]) - platform_device_register(at91_uarts[i]); - } -} -#else -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_add_device_serial(void) {} -#endif - - -/* -------------------------------------------------------------------- */ - -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init at91_add_standard_devices(void) -{ - at91_add_device_rtt(); - at91_add_device_watchdog(); - at91_add_device_tc(); - return 0; -} - -arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index fbff228cc63..e7ad1486408 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -10,304 +10,11 @@ * */ -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/clk/at91_pmc.h> - -#include <asm/proc-fns.h> -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> #include <asm/system_misc.h> -#include <mach/at91sam9263.h> #include <mach/hardware.h> -#include "at91_aic.h" #include "soc.h" #include "generic.h" -#include "sam9_smc.h" -#include "pm.h" - -#if defined(CONFIG_OLD_CLK_AT91) -#include "clock.h" -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk pioA_clk = { - .name = "pioA_clk", - .pmc_mask = 1 << AT91SAM9263_ID_PIOA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioB_clk = { - .name = "pioB_clk", - .pmc_mask = 1 << AT91SAM9263_ID_PIOB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioCDE_clk = { - .name = "pioCDE_clk", - .pmc_mask = 1 << AT91SAM9263_ID_PIOCDE, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT91SAM9263_ID_US0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT91SAM9263_ID_US1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT91SAM9263_ID_US2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc0_clk = { - .name = "mci0_clk", - .pmc_mask = 1 << AT91SAM9263_ID_MCI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc1_clk = { - .name = "mci1_clk", - .pmc_mask = 1 << AT91SAM9263_ID_MCI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk can_clk = { - .name = "can_clk", - .pmc_mask = 1 << AT91SAM9263_ID_CAN, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi_clk = { - .name = "twi_clk", - .pmc_mask = 1 << AT91SAM9263_ID_TWI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pmc_mask = 1 << AT91SAM9263_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pmc_mask = 1 << AT91SAM9263_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc0_clk = { - .name = "ssc0_clk", - .pmc_mask = 1 << AT91SAM9263_ID_SSC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc1_clk = { - .name = "ssc1_clk", - .pmc_mask = 1 << AT91SAM9263_ID_SSC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ac97_clk = { - .name = "ac97_clk", - .pmc_mask = 1 << AT91SAM9263_ID_AC97C, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tcb_clk = { - .name = "tcb_clk", - .pmc_mask = 1 << AT91SAM9263_ID_TCB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pwm_clk = { - .name = "pwm_clk", - .pmc_mask = 1 << AT91SAM9263_ID_PWMC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk macb_clk = { - .name = "pclk", - .pmc_mask = 1 << AT91SAM9263_ID_EMAC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk dma_clk = { - .name = "dma_clk", - .pmc_mask = 1 << AT91SAM9263_ID_DMA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twodge_clk = { - .name = "2dge_clk", - .pmc_mask = 1 << AT91SAM9263_ID_2DGE, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udc_clk = { - .name = "udc_clk", - .pmc_mask = 1 << AT91SAM9263_ID_UDP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk isi_clk = { - .name = "isi_clk", - .pmc_mask = 1 << AT91SAM9263_ID_ISI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk lcdc_clk = { - .name = "lcdc_clk", - .pmc_mask = 1 << AT91SAM9263_ID_LCDC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 1 << AT91SAM9263_ID_UHP, - .type = CLK_TYPE_PERIPHERAL, -}; - -static struct clk *periph_clocks[] __initdata = { - &pioA_clk, - &pioB_clk, - &pioCDE_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &mmc0_clk, - &mmc1_clk, - &can_clk, - &twi_clk, - &spi0_clk, - &spi1_clk, - &ssc0_clk, - &ssc1_clk, - &ac97_clk, - &tcb_clk, - &pwm_clk, - &macb_clk, - &twodge_clk, - &udc_clk, - &isi_clk, - &lcdc_clk, - &dma_clk, - &ohci_clk, - // irq0 .. irq1 -}; - -static struct clk_lookup periph_clocks_lookups[] = { - /* One additional fake clock for macb_hclk */ - CLKDEV_CON_ID("hclk", &macb_clk), - CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk), - CLKDEV_CON_DEV_ID("pclk", "fff98000.ssc", &ssc0_clk), - CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc1_clk), - CLKDEV_CON_DEV_ID("hclk", "at91sam9263-lcdfb.0", &lcdc_clk), - CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk), - /* fake hclk clock */ - CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), - CLKDEV_CON_ID("pioA", &pioA_clk), - CLKDEV_CON_ID("pioB", &pioB_clk), - CLKDEV_CON_ID("pioC", &pioCDE_clk), - CLKDEV_CON_ID("pioD", &pioCDE_clk), - CLKDEV_CON_ID("pioE", &pioCDE_clk), - /* more usart lookup table for DT entries */ - CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck), - CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk), - /* more tc lookup table for DT entries */ - CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb_clk), - CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk), - CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk), - CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "fff84000.mmc", &mmc1_clk), - CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioCDE_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCDE_clk), - CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCDE_clk), - CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk), -}; - -static struct clk_lookup usart_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), -}; - -/* - * The four programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; -static struct clk pck2 = { - .name = "pck2", - .pmc_mask = AT91_PMC_PCK2, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 2, -}; -static struct clk pck3 = { - .name = "pck3", - .pmc_mask = AT91_PMC_PCK3, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 3, -}; - -static void __init at91sam9263_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clkdev_add_table(periph_clocks_lookups, - ARRAY_SIZE(periph_clocks_lookups)); - clkdev_add_table(usart_clocks_lookups, - ARRAY_SIZE(usart_clocks_lookups)); - - clk_register(&pck0); - clk_register(&pck1); - clk_register(&pck2); - clk_register(&pck3); -} -#else -#define at91sam9263_register_clocks NULL -#endif - -/* -------------------------------------------------------------------- - * GPIO - * -------------------------------------------------------------------- */ - -static struct at91_gpio_bank at91sam9263_gpio[] __initdata = { - { - .id = AT91SAM9263_ID_PIOA, - .regbase = AT91SAM9263_BASE_PIOA, - }, { - .id = AT91SAM9263_ID_PIOB, - .regbase = AT91SAM9263_BASE_PIOB, - }, { - .id = AT91SAM9263_ID_PIOCDE, - .regbase = AT91SAM9263_BASE_PIOC, - }, { - .id = AT91SAM9263_ID_PIOCDE, - .regbase = AT91SAM9263_BASE_PIOD, - }, { - .id = AT91SAM9263_ID_PIOCDE, - .regbase = AT91SAM9263_BASE_PIOE, - } -}; /* -------------------------------------------------------------------- * AT91SAM9263 processor initialization @@ -319,121 +26,15 @@ static void __init at91sam9263_map_io(void) at91_init_sram(1, AT91SAM9263_SRAM1_BASE, AT91SAM9263_SRAM1_SIZE); } -static void __init at91sam9263_ioremap_registers(void) -{ - at91_ioremap_ramc(0, AT91SAM9263_BASE_SDRAMC0, 512); - at91_ioremap_ramc(1, AT91SAM9263_BASE_SDRAMC1, 512); - at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT); - at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0); - at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1); - at91_ioremap_matrix(AT91SAM9263_BASE_MATRIX); - at91_pm_set_standby(at91sam9_sdram_standby); -} - static void __init at91sam9263_initialize(void) { arm_pm_idle = at91sam9_idle; at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT0); at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT1); - - /* Register GPIO subsystem */ - at91_gpio_init(at91sam9263_gpio, 5); -} - -static struct resource rstc_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_RSTC, - .end = AT91SAM9263_BASE_RSTC + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91SAM9263_BASE_SDRAMC0, - .end = AT91SAM9263_BASE_SDRAMC0 + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device rstc_device = { - .name = "at91-sam9260-reset", - .resource = rstc_resources, - .num_resources = ARRAY_SIZE(rstc_resources), -}; - -static struct resource shdwc_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_SHDWC, - .end = AT91SAM9263_BASE_SHDWC + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device shdwc_device = { - .name = "at91-poweroff", - .resource = shdwc_resources, - .num_resources = ARRAY_SIZE(shdwc_resources), -}; - -static void __init at91sam9263_register_devices(void) -{ - platform_device_register(&rstc_device); - platform_device_register(&shdwc_device); -} - -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller (FIQ) */ - 7, /* System Peripherals */ - 1, /* Parallel IO Controller A */ - 1, /* Parallel IO Controller B */ - 1, /* Parallel IO Controller C, D and E */ - 0, - 0, - 5, /* USART 0 */ - 5, /* USART 1 */ - 5, /* USART 2 */ - 0, /* Multimedia Card Interface 0 */ - 0, /* Multimedia Card Interface 1 */ - 3, /* CAN */ - 6, /* Two-Wire Interface */ - 5, /* Serial Peripheral Interface 0 */ - 5, /* Serial Peripheral Interface 1 */ - 4, /* Serial Synchronous Controller 0 */ - 4, /* Serial Synchronous Controller 1 */ - 5, /* AC97 Controller */ - 0, /* Timer Counter 0, 1 and 2 */ - 0, /* Pulse Width Modulation Controller */ - 3, /* Ethernet */ - 0, - 0, /* 2D Graphic Engine */ - 2, /* USB Device Port */ - 0, /* Image Sensor Interface */ - 3, /* LDC Controller */ - 0, /* DMA Controller */ - 0, - 2, /* USB Host port */ - 0, /* Advanced Interrupt Controller (IRQ0) */ - 0, /* Advanced Interrupt Controller (IRQ1) */ -}; - -static void __init at91sam9263_init_time(void) -{ - at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); } AT91_SOC_START(at91sam9263) .map_io = at91sam9263_map_io, - .default_irq_priority = at91sam9263_default_irq_priority, - .extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1), - .ioremap_registers = at91sam9263_ioremap_registers, - .register_clocks = at91sam9263_register_clocks, - .register_devices = at91sam9263_register_devices, .init = at91sam9263_initialize, - .init_time = at91sam9263_init_time, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c deleted file mode 100644 index cef0e2f5706..00000000000 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ /dev/null @@ -1,1538 +0,0 @@ -/* - * arch/arm/mach-at91/at91sam9263_devices.c - * - * Copyright (C) 2007 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/i2c-gpio.h> - -#include <linux/fb.h> -#include <video/atmel_lcdc.h> - -#include <mach/at91sam9263.h> -#include <mach/at91sam9263_matrix.h> -#include <mach/at91_matrix.h> -#include <mach/at91sam9_smc.h> -#include <mach/hardware.h> - -#include "board.h" -#include "generic.h" -#include "gpio.h" - - -/* -------------------------------------------------------------------- - * USB Host - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = DMA_BIT_MASK(32); -static struct at91_usbh_data usbh_data; - -static struct resource usbh_resources[] = { - [0] = { - .start = AT91SAM9263_UHP_BASE, - .end = AT91SAM9263_UHP_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_usbh_device = { - .name = "at91_ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, - .num_resources = ARRAY_SIZE(usbh_resources), -}; - -void __init at91_add_device_usbh(struct at91_usbh_data *data) -{ - int i; - - if (!data) - return; - - /* Enable VBus control for UHP ports */ - for (i = 0; i < data->ports; i++) { - if (gpio_is_valid(data->vbus_pin[i])) - at91_set_gpio_output(data->vbus_pin[i], - data->vbus_pin_active_low[i]); - } - - /* Enable overcurrent notification */ - for (i = 0; i < data->ports; i++) { - if (gpio_is_valid(data->overcurrent_pin[i])) - at91_set_gpio_input(data->overcurrent_pin[i], 1); - } - - usbh_data = *data; - platform_device_register(&at91_usbh_device); -} -#else -void __init at91_add_device_usbh(struct at91_usbh_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * USB Device (Gadget) - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) -static struct at91_udc_data udc_data; - -static struct resource udc_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_UDP, - .end = AT91SAM9263_BASE_UDP + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_udc_device = { - .name = "at91_udc", - .id = -1, - .dev = { - .platform_data = &udc_data, - }, - .resource = udc_resources, - .num_resources = ARRAY_SIZE(udc_resources), -}; - -void __init at91_add_device_udc(struct at91_udc_data *data) -{ - if (!data) - return; - - if (gpio_is_valid(data->vbus_pin)) { - at91_set_gpio_input(data->vbus_pin, 0); - at91_set_deglitch(data->vbus_pin, 1); - } - - /* Pullup pin is handled internally by USB device peripheral */ - - udc_data = *data; - platform_device_register(&at91_udc_device); -} -#else -void __init at91_add_device_udc(struct at91_udc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Ethernet - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct macb_platform_data eth_data; - -static struct resource eth_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_EMAC, - .end = AT91SAM9263_BASE_EMAC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_eth_device = { - .name = "macb", - .id = -1, - .dev = { - .dma_mask = ð_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = ð_data, - }, - .resource = eth_resources, - .num_resources = ARRAY_SIZE(eth_resources), -}; - -void __init at91_add_device_eth(struct macb_platform_data *data) -{ - if (!data) - return; - - if (gpio_is_valid(data->phy_irq_pin)) { - at91_set_gpio_input(data->phy_irq_pin, 0); - at91_set_deglitch(data->phy_irq_pin, 1); - } - - /* Pins used for MII and RMII */ - at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */ - at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */ - at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */ - - if (!data->is_rmii) { - at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */ - at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */ - at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */ - at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */ - at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */ - at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */ - at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */ - at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */ - } - - eth_data = *data; - platform_device_register(&at91sam9263_eth_device); -} -#else -void __init at91_add_device_eth(struct macb_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if IS_ENABLED(CONFIG_MMC_ATMELMCI) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct mci_platform_data mmc0_data, mmc1_data; - -static struct resource mmc0_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_MCI0, - .end = AT91SAM9263_BASE_MCI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_mmc0_device = { - .name = "atmel_mci", - .id = 0, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc0_data, - }, - .resource = mmc0_resources, - .num_resources = ARRAY_SIZE(mmc0_resources), -}; - -static struct resource mmc1_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_MCI1, - .end = AT91SAM9263_BASE_MCI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_mmc1_device = { - .name = "atmel_mci", - .id = 1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc1_data, - }, - .resource = mmc1_resources, - .num_resources = ARRAY_SIZE(mmc1_resources), -}; - -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) -{ - unsigned int i; - unsigned int slot_count = 0; - - if (!data) - return; - - for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { - - if (!data->slot[i].bus_width) - continue; - - /* input/irq */ - if (gpio_is_valid(data->slot[i].detect_pin)) { - at91_set_gpio_input(data->slot[i].detect_pin, - 1); - at91_set_deglitch(data->slot[i].detect_pin, - 1); - } - if (gpio_is_valid(data->slot[i].wp_pin)) - at91_set_gpio_input(data->slot[i].wp_pin, 1); - - if (mmc_id == 0) { /* MCI0 */ - switch (i) { - case 0: /* slot A */ - /* CMD */ - at91_set_A_periph(AT91_PIN_PA1, 1); - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA0, 1); - if (data->slot[i].bus_width == 4) { - at91_set_A_periph(AT91_PIN_PA3, 1); - at91_set_A_periph(AT91_PIN_PA4, 1); - at91_set_A_periph(AT91_PIN_PA5, 1); - } - slot_count++; - break; - case 1: /* slot B */ - /* CMD */ - at91_set_A_periph(AT91_PIN_PA16, 1); - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA17, 1); - if (data->slot[i].bus_width == 4) { - at91_set_A_periph(AT91_PIN_PA18, 1); - at91_set_A_periph(AT91_PIN_PA19, 1); - at91_set_A_periph(AT91_PIN_PA20, 1); - } - slot_count++; - break; - default: - printk(KERN_ERR - "AT91: SD/MMC slot %d not available\n", i); - break; - } - if (slot_count) { - /* CLK */ - at91_set_A_periph(AT91_PIN_PA12, 0); - - mmc0_data = *data; - platform_device_register(&at91sam9263_mmc0_device); - } - } else if (mmc_id == 1) { /* MCI1 */ - switch (i) { - case 0: /* slot A */ - /* CMD */ - at91_set_A_periph(AT91_PIN_PA7, 1); - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA8, 1); - if (data->slot[i].bus_width == 4) { - at91_set_A_periph(AT91_PIN_PA9, 1); - at91_set_A_periph(AT91_PIN_PA10, 1); - at91_set_A_periph(AT91_PIN_PA11, 1); - } - slot_count++; - break; - case 1: /* slot B */ - /* CMD */ - at91_set_A_periph(AT91_PIN_PA21, 1); - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA22, 1); - if (data->slot[i].bus_width == 4) { - at91_set_A_periph(AT91_PIN_PA23, 1); - at91_set_A_periph(AT91_PIN_PA24, 1); - at91_set_A_periph(AT91_PIN_PA25, 1); - } - slot_count++; - break; - default: - printk(KERN_ERR - "AT91: SD/MMC slot %d not available\n", i); - break; - } - if (slot_count) { - /* CLK */ - at91_set_A_periph(AT91_PIN_PA6, 0); - - mmc1_data = *data; - platform_device_register(&at91sam9263_mmc1_device); - } - } - } -} -#else -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} -#endif - -/* -------------------------------------------------------------------- - * Compact Flash (PCMCIA or IDE) - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ - defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) - -static struct at91_cf_data cf0_data; - -static struct resource cf0_resources[] = { - [0] = { - .start = AT91_CHIPSELECT_4, - .end = AT91_CHIPSELECT_4 + SZ_256M - 1, - .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, - } -}; - -static struct platform_device cf0_device = { - .id = 0, - .dev = { - .platform_data = &cf0_data, - }, - .resource = cf0_resources, - .num_resources = ARRAY_SIZE(cf0_resources), -}; - -static struct at91_cf_data cf1_data; - -static struct resource cf1_resources[] = { - [0] = { - .start = AT91_CHIPSELECT_5, - .end = AT91_CHIPSELECT_5 + SZ_256M - 1, - .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, - } -}; - -static struct platform_device cf1_device = { - .id = 1, - .dev = { - .platform_data = &cf1_data, - }, - .resource = cf1_resources, - .num_resources = ARRAY_SIZE(cf1_resources), -}; - -void __init at91_add_device_cf(struct at91_cf_data *data) -{ - unsigned long ebi0_csa; - struct platform_device *pdev; - - if (!data) - return; - - /* - * assign CS4 or CS5 to SMC with Compact Flash logic support, - * we assume SMC timings are configured by board code, - * except True IDE where timings are controlled by driver - */ - ebi0_csa = at91_matrix_read(AT91_MATRIX_EBI0CSA); - switch (data->chipselect) { - case 4: - at91_set_A_periph(AT91_PIN_PD6, 0); /* EBI0_NCS4/CFCS0 */ - ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1; - cf0_data = *data; - pdev = &cf0_device; - break; - case 5: - at91_set_A_periph(AT91_PIN_PD7, 0); /* EBI0_NCS5/CFCS1 */ - ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2; - cf1_data = *data; - pdev = &cf1_device; - break; - default: - printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n", - data->chipselect); - return; - } - at91_matrix_write(AT91_MATRIX_EBI0CSA, ebi0_csa); - - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - - if (gpio_is_valid(data->irq_pin)) { - at91_set_gpio_input(data->irq_pin, 1); - at91_set_deglitch(data->irq_pin, 1); - } - - if (gpio_is_valid(data->vcc_pin)) - /* initially off */ - at91_set_gpio_output(data->vcc_pin, 0); - - /* enable EBI controlled pins */ - at91_set_A_periph(AT91_PIN_PD5, 1); /* NWAIT */ - at91_set_A_periph(AT91_PIN_PD8, 0); /* CFCE1 */ - at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */ - at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */ - - pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf"; - platform_device_register(pdev); -} -#else -void __init at91_add_device_cf(struct at91_cf_data *data) {} -#endif - -/* -------------------------------------------------------------------- - * NAND / SmartMedia - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) -static struct atmel_nand_data nand_data; - -#define NAND_BASE AT91_CHIPSELECT_3 - -static struct resource nand_resources[] = { - [0] = { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91SAM9263_BASE_ECC0, - .end = AT91SAM9263_BASE_ECC0 + SZ_512 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91sam9263_nand_device = { - .name = "atmel_nand", - .id = -1, - .dev = { - .platform_data = &nand_data, - }, - .resource = nand_resources, - .num_resources = ARRAY_SIZE(nand_resources), -}; - -void __init at91_add_device_nand(struct atmel_nand_data *data) -{ - unsigned long csa; - - if (!data) - return; - - csa = at91_matrix_read(AT91_MATRIX_EBI0CSA); - at91_matrix_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); - - /* enable pin */ - if (gpio_is_valid(data->enable_pin)) - at91_set_gpio_output(data->enable_pin, 1); - - /* ready/busy pin */ - if (gpio_is_valid(data->rdy_pin)) - at91_set_gpio_input(data->rdy_pin, 1); - - /* card detect pin */ - if (gpio_is_valid(data->det_pin)) - at91_set_gpio_input(data->det_pin, 1); - - nand_data = *data; - platform_device_register(&at91sam9263_nand_device); -} -#else -void __init at91_add_device_nand(struct atmel_nand_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * TWI (i2c) - * -------------------------------------------------------------------- */ - -/* - * Prefer the GPIO code since the TWI controller isn't robust - * (gets overruns and underruns under load) and can only issue - * repeated STARTs in one scenario (the driver doesn't yet handle them). - */ -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = AT91_PIN_PB4, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PB5, - .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ -}; - -static struct platform_device at91sam9263_twi_device = { - .name = "i2c-gpio", - .id = 0, - .dev.platform_data = &pdata, -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PB4, 1); - - at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PB5, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91sam9263_twi_device); -} - -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) - -static struct resource twi_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_TWI, - .end = AT91SAM9263_BASE_TWI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_twi_device = { - .name = "i2c-at91sam9260", - .id = 0, - .resource = twi_resources, - .num_resources = ARRAY_SIZE(twi_resources), -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - /* pins used for TWI interface */ - at91_set_A_periph(AT91_PIN_PB4, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PB4, 1); - - at91_set_A_periph(AT91_PIN_PB5, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PB5, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91sam9263_twi_device); -} -#else -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * SPI - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = DMA_BIT_MASK(32); - -static struct resource spi0_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_SPI0, - .end = AT91SAM9263_BASE_SPI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_spi0_device = { - .name = "atmel_spi", - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -}; - -static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 }; - -static struct resource spi1_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_SPI1, - .end = AT91SAM9263_BASE_SPI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_spi1_device = { - .name = "atmel_spi", - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -}; - -static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 }; - -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -{ - int i; - unsigned long cs_pin; - short enable_spi0 = 0; - short enable_spi1 = 0; - - /* Choose SPI chip-selects */ - for (i = 0; i < nr_devices; i++) { - if (devices[i].controller_data) - cs_pin = (unsigned long) devices[i].controller_data; - else if (devices[i].bus_num == 0) - cs_pin = spi0_standard_cs[devices[i].chip_select]; - else - cs_pin = spi1_standard_cs[devices[i].chip_select]; - - if (!gpio_is_valid(cs_pin)) - continue; - - if (devices[i].bus_num == 0) - enable_spi0 = 1; - else - enable_spi1 = 1; - - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; - } - - spi_register_board_info(devices, nr_devices); - - /* Configure SPI bus(es) */ - if (enable_spi0) { - at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - - platform_device_register(&at91sam9263_spi0_device); - } - if (enable_spi1) { - at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */ - at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ - at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ - - platform_device_register(&at91sam9263_spi1_device); - } -} -#else -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * AC97 - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE) -static u64 ac97_dmamask = DMA_BIT_MASK(32); -static struct ac97c_platform_data ac97_data; - -static struct resource ac97_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_AC97C, - .end = AT91SAM9263_BASE_AC97C + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_ac97_device = { - .name = "atmel_ac97c", - .id = 0, - .dev = { - .dma_mask = &ac97_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &ac97_data, - }, - .resource = ac97_resources, - .num_resources = ARRAY_SIZE(ac97_resources), -}; - -void __init at91_add_device_ac97(struct ac97c_platform_data *data) -{ - if (!data) - return; - - at91_set_A_periph(AT91_PIN_PB0, 0); /* AC97FS */ - at91_set_A_periph(AT91_PIN_PB1, 0); /* AC97CK */ - at91_set_A_periph(AT91_PIN_PB2, 0); /* AC97TX */ - at91_set_A_periph(AT91_PIN_PB3, 0); /* AC97RX */ - - /* reset */ - if (gpio_is_valid(data->reset_pin)) - at91_set_gpio_output(data->reset_pin, 0); - - ac97_data = *data; - platform_device_register(&at91sam9263_ac97_device); -} -#else -void __init at91_add_device_ac97(struct ac97c_platform_data *data) {} -#endif - -/* -------------------------------------------------------------------- - * CAN Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_CAN_AT91) || defined(CONFIG_CAN_AT91_MODULE) -static struct resource can_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_CAN, - .end = AT91SAM9263_BASE_CAN + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_can_device = { - .name = "at91_can", - .id = -1, - .resource = can_resources, - .num_resources = ARRAY_SIZE(can_resources), -}; - -void __init at91_add_device_can(struct at91_can_data *data) -{ - at91_set_A_periph(AT91_PIN_PA13, 0); /* CANTX */ - at91_set_A_periph(AT91_PIN_PA14, 0); /* CANRX */ - at91sam9263_can_device.dev.platform_data = data; - - platform_device_register(&at91sam9263_can_device); -} -#else -void __init at91_add_device_can(struct at91_can_data *data) {} -#endif - -/* -------------------------------------------------------------------- - * LCD Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static u64 lcdc_dmamask = DMA_BIT_MASK(32); -static struct atmel_lcdfb_pdata lcdc_data; - -static struct resource lcdc_resources[] = { - [0] = { - .start = AT91SAM9263_LCDC_BASE, - .end = AT91SAM9263_LCDC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_lcdc_device = { - .name = "at91sam9263-lcdfb", - .id = 0, - .dev = { - .dma_mask = &lcdc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &lcdc_data, - }, - .resource = lcdc_resources, - .num_resources = ARRAY_SIZE(lcdc_resources), -}; - -void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) -{ - if (!data) - return; - - at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ - at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ - at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ - at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ - at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ - at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ - at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ - at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ - at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ - at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ - at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ - at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ - at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ - at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */ - at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ - at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ - at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ - at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ - at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ - at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */ - at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ - at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ - - lcdc_data = *data; - platform_device_register(&at91_lcdc_device); -} -#else -void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Image Sensor Interface - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE) - -struct resource isi_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_ISI, - .end = AT91SAM9263_BASE_ISI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_isi_device = { - .name = "at91_isi", - .id = -1, - .resource = isi_resources, - .num_resources = ARRAY_SIZE(isi_resources), -}; - -void __init at91_add_device_isi(struct isi_platform_data *data, - bool use_pck_as_mck) -{ - at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */ - at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */ - at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */ - at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */ - at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */ - at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */ - at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */ - at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */ - at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */ - at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */ - at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */ - at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */ - at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */ - at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */ - at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */ - - if (use_pck_as_mck) { - at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */ - - /* TODO: register the PCK for ISI_MCK and set its parent */ - } -} -#else -void __init at91_add_device_isi(struct isi_platform_data *data, - bool use_pck_as_mck) {} -#endif - - -/* -------------------------------------------------------------------- - * Timer/Counter block - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_ATMEL_TCLIB - -static struct resource tcb_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_TCB0, - .end = AT91SAM9263_BASE_TCB0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_tcb_device = { - .name = "atmel_tcb", - .id = 0, - .resource = tcb_resources, - .num_resources = ARRAY_SIZE(tcb_resources), -}; - -#if defined(CONFIG_OF) -static struct of_device_id tcb_ids[] = { - { .compatible = "atmel,at91rm9200-tcb" }, - { /*sentinel*/ } -}; -#endif - -static void __init at91_add_device_tc(void) -{ -#if defined(CONFIG_OF) - struct device_node *np; - - np = of_find_matching_node(NULL, tcb_ids); - if (np) { - of_node_put(np); - return; - } -#endif - - platform_device_register(&at91sam9263_tcb_device); -} -#else -static void __init at91_add_device_tc(void) { } -#endif - - -/* -------------------------------------------------------------------- - * RTT - * -------------------------------------------------------------------- */ - -static struct resource rtt0_resources[] = { - { - .start = AT91SAM9263_BASE_RTT0, - .end = AT91SAM9263_BASE_RTT0 + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device at91sam9263_rtt0_device = { - .name = "at91_rtt", - .id = 0, - .resource = rtt0_resources, -}; - -static struct resource rtt1_resources[] = { - { - .start = AT91SAM9263_BASE_RTT1, - .end = AT91SAM9263_BASE_RTT1 + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device at91sam9263_rtt1_device = { - .name = "at91_rtt", - .id = 1, - .resource = rtt1_resources, -}; - -#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) -static void __init at91_add_device_rtt_rtc(void) -{ - struct platform_device *pdev; - struct resource *r; - - switch (CONFIG_RTC_DRV_AT91SAM9_RTT) { - case 0: - /* - * The second resource is needed only for the chosen RTT: - * GPBR will serve as the storage for RTC time offset - */ - at91sam9263_rtt0_device.num_resources = 3; - at91sam9263_rtt1_device.num_resources = 1; - pdev = &at91sam9263_rtt0_device; - r = rtt0_resources; - break; - case 1: - at91sam9263_rtt0_device.num_resources = 1; - at91sam9263_rtt1_device.num_resources = 3; - pdev = &at91sam9263_rtt1_device; - r = rtt1_resources; - break; - default: - pr_err("at91sam9263: only supports 2 RTT (%d)\n", - CONFIG_RTC_DRV_AT91SAM9_RTT); - return; - } - - pdev->name = "rtc-at91sam9"; - r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; - r[1].end = r[1].start + 3; - r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; - r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; -} -#else -static void __init at91_add_device_rtt_rtc(void) -{ - /* Only one resource is needed: RTT not used as RTC */ - at91sam9263_rtt0_device.num_resources = 1; - at91sam9263_rtt1_device.num_resources = 1; -} -#endif - -static void __init at91_add_device_rtt(void) -{ - at91_add_device_rtt_rtc(); - platform_device_register(&at91sam9263_rtt0_device); - platform_device_register(&at91sam9263_rtt1_device); -} - - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) -static struct resource wdt_resources[] = { - { - .start = AT91SAM9263_BASE_WDT, - .end = AT91SAM9263_BASE_WDT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91sam9263_wdt_device = { - .name = "at91_wdt", - .id = -1, - .resource = wdt_resources, - .num_resources = ARRAY_SIZE(wdt_resources), -}; - -static void __init at91_add_device_watchdog(void) -{ - platform_device_register(&at91sam9263_wdt_device); -} -#else -static void __init at91_add_device_watchdog(void) {} -#endif - - -/* -------------------------------------------------------------------- - * PWM - * --------------------------------------------------------------------*/ - -#if IS_ENABLED(CONFIG_PWM_ATMEL) -static struct resource pwm_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_PWMC, - .end = AT91SAM9263_BASE_PWMC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_pwm0_device = { - .name = "at91sam9rl-pwm", - .id = -1, - .resource = pwm_resources, - .num_resources = ARRAY_SIZE(pwm_resources), -}; - -void __init at91_add_device_pwm(u32 mask) -{ - if (mask & (1 << AT91_PWM0)) - at91_set_B_periph(AT91_PIN_PB7, 1); /* enable PWM0 */ - - if (mask & (1 << AT91_PWM1)) - at91_set_B_periph(AT91_PIN_PB8, 1); /* enable PWM1 */ - - if (mask & (1 << AT91_PWM2)) - at91_set_B_periph(AT91_PIN_PC29, 1); /* enable PWM2 */ - - if (mask & (1 << AT91_PWM3)) - at91_set_B_periph(AT91_PIN_PB29, 1); /* enable PWM3 */ - - platform_device_register(&at91sam9263_pwm0_device); -} -#else -void __init at91_add_device_pwm(u32 mask) {} -#endif - - -/* -------------------------------------------------------------------- - * SSC -- Synchronous Serial Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) -static u64 ssc0_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc0_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_SSC0, - .end = AT91SAM9263_BASE_SSC0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_ssc0_device = { - .name = "at91rm9200_ssc", - .id = 0, - .dev = { - .dma_mask = &ssc0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc0_resources, - .num_resources = ARRAY_SIZE(ssc0_resources), -}; - -static inline void configure_ssc0_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_B_periph(AT91_PIN_PB0, 1); - if (pins & ATMEL_SSC_TK) - at91_set_B_periph(AT91_PIN_PB1, 1); - if (pins & ATMEL_SSC_TD) - at91_set_B_periph(AT91_PIN_PB2, 1); - if (pins & ATMEL_SSC_RD) - at91_set_B_periph(AT91_PIN_PB3, 1); - if (pins & ATMEL_SSC_RK) - at91_set_B_periph(AT91_PIN_PB4, 1); - if (pins & ATMEL_SSC_RF) - at91_set_B_periph(AT91_PIN_PB5, 1); -} - -static u64 ssc1_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc1_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_SSC1, - .end = AT91SAM9263_BASE_SSC1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_ssc1_device = { - .name = "at91rm9200_ssc", - .id = 1, - .dev = { - .dma_mask = &ssc1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc1_resources, - .num_resources = ARRAY_SIZE(ssc1_resources), -}; - -static inline void configure_ssc1_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PB6, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PB7, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PB8, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PB9, 1); - if (pins & ATMEL_SSC_RK) - at91_set_A_periph(AT91_PIN_PB10, 1); - if (pins & ATMEL_SSC_RF) - at91_set_A_periph(AT91_PIN_PB11, 1); -} - -/* - * SSC controllers are accessed through library code, instead of any - * kind of all-singing/all-dancing driver. For example one could be - * used by a particular I2S audio codec's driver, while another one - * on the same system might be used by a custom data capture driver. - */ -void __init at91_add_device_ssc(unsigned id, unsigned pins) -{ - struct platform_device *pdev; - - /* - * NOTE: caller is responsible for passing information matching - * "pins" to whatever will be using each particular controller. - */ - switch (id) { - case AT91SAM9263_ID_SSC0: - pdev = &at91sam9263_ssc0_device; - configure_ssc0_pins(pins); - break; - case AT91SAM9263_ID_SSC1: - pdev = &at91sam9263_ssc1_device; - configure_ssc1_pins(pins); - break; - default: - return; - } - - platform_device_register(pdev); -} - -#else -void __init at91_add_device_ssc(unsigned id, unsigned pins) {} -#endif - - -/* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SERIAL_ATMEL) - -static struct resource dbgu_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_DBGU, - .end = AT91SAM9263_BASE_DBGU + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91_ID_SYS, - .end = NR_IRQS_LEGACY + AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data dbgu_data = { - .use_dma_tx = 0, - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ -}; - -static u64 dbgu_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9263_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { - .dma_mask = &dbgu_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -}; - -static inline void configure_dbgu_pins(void) -{ - at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ - at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ -} - -static struct resource uart0_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_US0, - .end = AT91SAM9263_BASE_US0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US0, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart0_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart0_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9263_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { - .dma_mask = &uart0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), -}; - -static inline void configure_usart0_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */ -} - -static struct resource uart1_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_US1, - .end = AT91SAM9263_BASE_US1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US1, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart1_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart1_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9263_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { - .dma_mask = &uart1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), -}; - -static inline void configure_usart1_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ -} - -static struct resource uart2_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_US2, - .end = AT91SAM9263_BASE_US2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US2, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart2_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart2_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9263_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { - .dma_mask = &uart2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), -}; - -static inline void configure_usart2_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ -} - -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ - -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -{ - struct platform_device *pdev; - struct atmel_uart_data *pdata; - - switch (id) { - case 0: /* DBGU */ - pdev = &at91sam9263_dbgu_device; - configure_dbgu_pins(); - break; - case AT91SAM9263_ID_US0: - pdev = &at91sam9263_uart0_device; - configure_usart0_pins(pins); - break; - case AT91SAM9263_ID_US1: - pdev = &at91sam9263_uart1_device; - configure_usart1_pins(pins); - break; - case AT91SAM9263_ID_US2: - pdev = &at91sam9263_uart2_device; - configure_usart2_pins(pins); - break; - default: - return; - } - pdata = pdev->dev.platform_data; - pdata->num = portnr; /* update to mapped ID */ - - if (portnr < ATMEL_MAX_UART) - at91_uarts[portnr] = pdev; -} - -void __init at91_add_device_serial(void) -{ - int i; - - for (i = 0; i < ATMEL_MAX_UART; i++) { - if (at91_uarts[i]) - platform_device_register(at91_uarts[i]); - } -} -#else -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_add_device_serial(void) {} -#endif - - -/* -------------------------------------------------------------------- */ -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init at91_add_standard_devices(void) -{ - if (of_have_populated_dt()) - return 0; - - at91_add_device_rtt(); - at91_add_device_watchdog(); - at91_add_device_tc(); - return 0; -} - -arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 405427ec05f..b6117bea9a6 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -10,356 +10,12 @@ * */ -#include <linux/module.h> -#include <linux/dma-mapping.h> -#include <linux/clk/at91_pmc.h> -#include <linux/platform_device.h> - -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> #include <asm/system_misc.h> -#include <mach/at91sam9g45.h> -#include <mach/cpu.h> +#include <asm/irq.h> #include <mach/hardware.h> -#include "at91_aic.h" #include "soc.h" #include "generic.h" -#include "sam9_smc.h" -#include "pm.h" - -#if defined(CONFIG_OLD_CLK_AT91) -#include "clock.h" -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk pioA_clk = { - .name = "pioA_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_PIOA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioB_clk = { - .name = "pioB_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_PIOB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioC_clk = { - .name = "pioC_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_PIOC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioDE_clk = { - .name = "pioDE_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_PIODE, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk trng_clk = { - .name = "trng_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_TRNG, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_US0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_US1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_US2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart3_clk = { - .name = "usart3_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_US3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc0_clk = { - .name = "mci0_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_MCI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi0_clk = { - .name = "twi0_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_TWI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi1_clk = { - .name = "twi1_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_TWI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc0_clk = { - .name = "ssc0_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_SSC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc1_clk = { - .name = "ssc1_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_SSC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tcb0_clk = { - .name = "tcb0_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_TCB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pwm_clk = { - .name = "pwm_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_PWMC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tsc_clk = { - .name = "tsc_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_TSC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk dma_clk = { - .name = "dma_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_DMA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk uhphs_clk = { - .name = "uhphs_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_UHPHS, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk lcdc_clk = { - .name = "lcdc_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_LCDC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ac97_clk = { - .name = "ac97_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_AC97C, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk macb_clk = { - .name = "pclk", - .pmc_mask = 1 << AT91SAM9G45_ID_EMAC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk isi_clk = { - .name = "isi_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_ISI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udphs_clk = { - .name = "udphs_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_UDPHS, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc1_clk = { - .name = "mci1_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_MCI1, - .type = CLK_TYPE_PERIPHERAL, -}; - -/* Video decoder clock - Only for sam9m10/sam9m11 */ -static struct clk vdec_clk = { - .name = "vdec_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_VDEC, - .type = CLK_TYPE_PERIPHERAL, -}; - -static struct clk adc_op_clk = { - .name = "adc_op_clk", - .type = CLK_TYPE_PERIPHERAL, - .rate_hz = 300000, -}; - -/* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */ -static struct clk aestdessha_clk = { - .name = "aestdessha_clk", - .pmc_mask = 1 << AT91SAM9G45_ID_AESTDESSHA, - .type = CLK_TYPE_PERIPHERAL, -}; - -static struct clk *periph_clocks[] __initdata = { - &pioA_clk, - &pioB_clk, - &pioC_clk, - &pioDE_clk, - &trng_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &usart3_clk, - &mmc0_clk, - &twi0_clk, - &twi1_clk, - &spi0_clk, - &spi1_clk, - &ssc0_clk, - &ssc1_clk, - &tcb0_clk, - &pwm_clk, - &tsc_clk, - &dma_clk, - &uhphs_clk, - &lcdc_clk, - &ac97_clk, - &macb_clk, - &isi_clk, - &udphs_clk, - &mmc1_clk, - &adc_op_clk, - &aestdessha_clk, - // irq0 -}; - -static struct clk_lookup periph_clocks_lookups[] = { - /* One additional fake clock for macb_hclk */ - CLKDEV_CON_ID("hclk", &macb_clk), - /* One additional fake clock for ohci */ - CLKDEV_CON_ID("ohci_clk", &uhphs_clk), - CLKDEV_CON_DEV_ID("hclk", "at91sam9g45-lcdfb.0", &lcdc_clk), - CLKDEV_CON_DEV_ID("hclk", "at91sam9g45es-lcdfb.0", &lcdc_clk), - CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk), - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), - CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk), - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi0_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.1", &twi1_clk), - CLKDEV_CON_DEV_ID("pclk", "at91sam9g45_ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("pclk", "at91sam9g45_ssc.1", &ssc1_clk), - CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc0_clk), - CLKDEV_CON_DEV_ID("pclk", "fffa0000.ssc", &ssc1_clk), - CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk), - CLKDEV_CON_DEV_ID(NULL, "atmel_sha", &aestdessha_clk), - CLKDEV_CON_DEV_ID(NULL, "atmel_tdes", &aestdessha_clk), - CLKDEV_CON_DEV_ID(NULL, "atmel_aes", &aestdessha_clk), - CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk), - /* more usart lookup table for DT entries */ - CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck), - CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk), - CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk), - /* more tc lookup table for DT entries */ - CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb0_clk), - CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk), - CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk), - CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk), - CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "fffd0000.mmc", &mmc1_clk), - CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk), - CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk), - CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk), - CLKDEV_CON_DEV_ID("hclk", "600000.gadget", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "600000.gadget", &udphs_clk), - /* fake hclk clock */ - CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioDE_clk), - CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioDE_clk), - - CLKDEV_CON_ID("pioA", &pioA_clk), - CLKDEV_CON_ID("pioB", &pioB_clk), - CLKDEV_CON_ID("pioC", &pioC_clk), - CLKDEV_CON_ID("pioD", &pioDE_clk), - CLKDEV_CON_ID("pioE", &pioDE_clk), - /* Fake adc clock */ - CLKDEV_CON_ID("adc_clk", &tsc_clk), - CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk), -}; - -static struct clk_lookup usart_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), -}; - -/* - * The two programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; - -static void __init at91sam9g45_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clkdev_add_table(periph_clocks_lookups, - ARRAY_SIZE(periph_clocks_lookups)); - clkdev_add_table(usart_clocks_lookups, - ARRAY_SIZE(usart_clocks_lookups)); - - if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11()) - clk_register(&vdec_clk); - - clk_register(&pck0); - clk_register(&pck1); -} -#else -#define at91sam9g45_register_clocks NULL -#endif - -/* -------------------------------------------------------------------- - * GPIO - * -------------------------------------------------------------------- */ - -static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = { - { - .id = AT91SAM9G45_ID_PIOA, - .regbase = AT91SAM9G45_BASE_PIOA, - }, { - .id = AT91SAM9G45_ID_PIOB, - .regbase = AT91SAM9G45_BASE_PIOB, - }, { - .id = AT91SAM9G45_ID_PIOC, - .regbase = AT91SAM9G45_BASE_PIOC, - }, { - .id = AT91SAM9G45_ID_PIODE, - .regbase = AT91SAM9G45_BASE_PIOD, - }, { - .id = AT91SAM9G45_ID_PIODE, - .regbase = AT91SAM9G45_BASE_PIOE, - } -}; /* -------------------------------------------------------------------- * AT91SAM9G45 processor initialization @@ -370,125 +26,15 @@ static void __init at91sam9g45_map_io(void) at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE); } -static void __init at91sam9g45_ioremap_registers(void) -{ - at91_ioremap_ramc(0, AT91SAM9G45_BASE_DDRSDRC1, 512); - at91_ioremap_ramc(1, AT91SAM9G45_BASE_DDRSDRC0, 512); - at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT); - at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC); - at91_ioremap_matrix(AT91SAM9G45_BASE_MATRIX); - at91_pm_set_standby(at91_ddr_standby); -} - static void __init at91sam9g45_initialize(void) { arm_pm_idle = at91sam9_idle; at91_sysirq_mask_rtc(AT91SAM9G45_BASE_RTC); at91_sysirq_mask_rtt(AT91SAM9G45_BASE_RTT); - - /* Register GPIO subsystem */ - at91_gpio_init(at91sam9g45_gpio, 5); -} - -static struct resource rstc_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_RSTC, - .end = AT91SAM9G45_BASE_RSTC + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91SAM9G45_BASE_DDRSDRC1, - .end = AT91SAM9G45_BASE_DDRSDRC1 + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = AT91SAM9G45_BASE_DDRSDRC0, - .end = AT91SAM9G45_BASE_DDRSDRC0 + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device rstc_device = { - .name = "at91-sam9g45-reset", - .resource = rstc_resources, - .num_resources = ARRAY_SIZE(rstc_resources), -}; - -static struct resource shdwc_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_SHDWC, - .end = AT91SAM9G45_BASE_SHDWC + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device shdwc_device = { - .name = "at91-poweroff", - .resource = shdwc_resources, - .num_resources = ARRAY_SIZE(shdwc_resources), -}; - -static void __init at91sam9g45_register_devices(void) -{ - platform_device_register(&rstc_device); - platform_device_register(&shdwc_device); -} - -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller (FIQ) */ - 7, /* System Peripherals */ - 1, /* Parallel IO Controller A */ - 1, /* Parallel IO Controller B */ - 1, /* Parallel IO Controller C */ - 1, /* Parallel IO Controller D and E */ - 0, - 5, /* USART 0 */ - 5, /* USART 1 */ - 5, /* USART 2 */ - 5, /* USART 3 */ - 0, /* Multimedia Card Interface 0 */ - 6, /* Two-Wire Interface 0 */ - 6, /* Two-Wire Interface 1 */ - 5, /* Serial Peripheral Interface 0 */ - 5, /* Serial Peripheral Interface 1 */ - 4, /* Serial Synchronous Controller 0 */ - 4, /* Serial Synchronous Controller 1 */ - 0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */ - 0, /* Pulse Width Modulation Controller */ - 0, /* Touch Screen Controller */ - 0, /* DMA Controller */ - 2, /* USB Host High Speed port */ - 3, /* LDC Controller */ - 5, /* AC97 Controller */ - 3, /* Ethernet */ - 0, /* Image Sensor Interface */ - 2, /* USB Device High speed port */ - 0, /* AESTDESSHA Crypto HW Accelerators */ - 0, /* Multimedia Card Interface 1 */ - 0, - 0, /* Advanced Interrupt Controller (IRQ0) */ -}; - -static void __init at91sam9g45_init_time(void) -{ - at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); } AT91_SOC_START(at91sam9g45) .map_io = at91sam9g45_map_io, - .default_irq_priority = at91sam9g45_default_irq_priority, - .extern_irq = (1 << AT91SAM9G45_ID_IRQ0), - .ioremap_registers = at91sam9g45_ioremap_registers, - .register_clocks = at91sam9g45_register_clocks, - .register_devices = at91sam9g45_register_devices, .init = at91sam9g45_initialize, - .init_time = at91sam9g45_init_time, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c deleted file mode 100644 index 21ab782cc8e..00000000000 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ /dev/null @@ -1,1915 +0,0 @@ -/* - * On-Chip devices setup code for the AT91SAM9G45 family - * - * Copyright (C) 2009 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <linux/i2c-gpio.h> -#include <linux/atmel-mci.h> -#include <linux/platform_data/crypto-atmel.h> - -#include <linux/platform_data/at91_adc.h> - -#include <linux/fb.h> -#include <video/atmel_lcdc.h> - -#include <mach/at91sam9g45.h> -#include <mach/at91sam9g45_matrix.h> -#include <mach/at91_matrix.h> -#include <mach/at91sam9_smc.h> -#include <linux/platform_data/dma-atmel.h> -#include <mach/atmel-mci.h> -#include <mach/hardware.h> - -#include <media/atmel-isi.h> - -#include "board.h" -#include "generic.h" -#include "clock.h" -#include "gpio.h" - - -/* -------------------------------------------------------------------- - * HDMAC - AHB DMA Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) -static u64 hdmac_dmamask = DMA_BIT_MASK(32); - -static struct resource hdmac_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_DMA, - .end = AT91SAM9G45_BASE_DMA + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at_hdmac_device = { - .name = "at91sam9g45_dma", - .id = -1, - .dev = { - .dma_mask = &hdmac_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = hdmac_resources, - .num_resources = ARRAY_SIZE(hdmac_resources), -}; - -void __init at91_add_device_hdmac(void) -{ - platform_device_register(&at_hdmac_device); -} -#else -void __init at91_add_device_hdmac(void) {} -#endif - - -/* -------------------------------------------------------------------- - * USB Host (OHCI) - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = DMA_BIT_MASK(32); -static struct at91_usbh_data usbh_ohci_data; - -static struct resource usbh_ohci_resources[] = { - [0] = { - .start = AT91SAM9G45_OHCI_BASE, - .end = AT91SAM9G45_OHCI_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_usbh_ohci_device = { - .name = "at91_ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_ohci_data, - }, - .resource = usbh_ohci_resources, - .num_resources = ARRAY_SIZE(usbh_ohci_resources), -}; - -void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) -{ - int i; - - if (!data) - return; - - /* Enable VBus control for UHP ports */ - for (i = 0; i < data->ports; i++) { - if (gpio_is_valid(data->vbus_pin[i])) - at91_set_gpio_output(data->vbus_pin[i], - data->vbus_pin_active_low[i]); - } - - /* Enable overcurrent notification */ - for (i = 0; i < data->ports; i++) { - if (gpio_is_valid(data->overcurrent_pin[i])) - at91_set_gpio_input(data->overcurrent_pin[i], 1); - } - - usbh_ohci_data = *data; - platform_device_register(&at91_usbh_ohci_device); -} -#else -void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * USB Host HS (EHCI) - * Needs an OHCI host for low and full speed management - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) -static u64 ehci_dmamask = DMA_BIT_MASK(32); -static struct at91_usbh_data usbh_ehci_data; - -static struct resource usbh_ehci_resources[] = { - [0] = { - .start = AT91SAM9G45_EHCI_BASE, - .end = AT91SAM9G45_EHCI_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_usbh_ehci_device = { - .name = "atmel-ehci", - .id = -1, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_ehci_data, - }, - .resource = usbh_ehci_resources, - .num_resources = ARRAY_SIZE(usbh_ehci_resources), -}; - -void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) -{ - int i; - - if (!data) - return; - - /* Enable VBus control for UHP ports */ - for (i = 0; i < data->ports; i++) { - if (gpio_is_valid(data->vbus_pin[i])) - at91_set_gpio_output(data->vbus_pin[i], - data->vbus_pin_active_low[i]); - } - - usbh_ehci_data = *data; - platform_device_register(&at91_usbh_ehci_device); -} -#else -void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * USB HS Device (Gadget) - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE) -static struct resource usba_udc_resources[] = { - [0] = { - .start = AT91SAM9G45_UDPHS_FIFO, - .end = AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91SAM9G45_BASE_UDPHS, - .end = AT91SAM9G45_BASE_UDPHS + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS, - .flags = IORESOURCE_IRQ, - }, -}; - -#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \ - [idx] = { \ - .name = nam, \ - .index = idx, \ - .fifo_size = maxpkt, \ - .nr_banks = maxbk, \ - .can_dma = dma, \ - .can_isoc = isoc, \ - } - -static struct usba_ep_data usba_udc_ep[] __initdata = { - EP("ep0", 0, 64, 1, 0, 0), - EP("ep1", 1, 1024, 2, 1, 1), - EP("ep2", 2, 1024, 2, 1, 1), - EP("ep3", 3, 1024, 3, 1, 0), - EP("ep4", 4, 1024, 3, 1, 0), - EP("ep5", 5, 1024, 3, 1, 1), - EP("ep6", 6, 1024, 3, 1, 1), -}; - -#undef EP - -/* - * pdata doesn't have room for any endpoints, so we need to - * append room for the ones we need right after it. - */ -static struct { - struct usba_platform_data pdata; - struct usba_ep_data ep[7]; -} usba_udc_data; - -static struct platform_device at91_usba_udc_device = { - .name = "atmel_usba_udc", - .id = -1, - .dev = { - .platform_data = &usba_udc_data.pdata, - }, - .resource = usba_udc_resources, - .num_resources = ARRAY_SIZE(usba_udc_resources), -}; - -void __init at91_add_device_usba(struct usba_platform_data *data) -{ - usba_udc_data.pdata.vbus_pin = -EINVAL; - usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep); - memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep)); - - if (data && gpio_is_valid(data->vbus_pin)) { - at91_set_gpio_input(data->vbus_pin, 0); - at91_set_deglitch(data->vbus_pin, 1); - usba_udc_data.pdata.vbus_pin = data->vbus_pin; - } - - /* Pullup pin is handled internally by USB device peripheral */ - - platform_device_register(&at91_usba_udc_device); -} -#else -void __init at91_add_device_usba(struct usba_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Ethernet - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct macb_platform_data eth_data; - -static struct resource eth_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_EMAC, - .end = AT91SAM9G45_BASE_EMAC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9g45_eth_device = { - .name = "macb", - .id = -1, - .dev = { - .dma_mask = ð_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = ð_data, - }, - .resource = eth_resources, - .num_resources = ARRAY_SIZE(eth_resources), -}; - -void __init at91_add_device_eth(struct macb_platform_data *data) -{ - if (!data) - return; - - if (gpio_is_valid(data->phy_irq_pin)) { - at91_set_gpio_input(data->phy_irq_pin, 0); - at91_set_deglitch(data->phy_irq_pin, 1); - } - - /* Pins used for MII and RMII */ - at91_set_A_periph(AT91_PIN_PA17, 0); /* ETXCK_EREFCK */ - at91_set_A_periph(AT91_PIN_PA15, 0); /* ERXDV */ - at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PA16, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PA14, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PA11, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PA19, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PA18, 0); /* EMDC */ - - if (!data->is_rmii) { - at91_set_B_periph(AT91_PIN_PA29, 0); /* ECRS */ - at91_set_B_periph(AT91_PIN_PA30, 0); /* ECOL */ - at91_set_B_periph(AT91_PIN_PA8, 0); /* ERX2 */ - at91_set_B_periph(AT91_PIN_PA9, 0); /* ERX3 */ - at91_set_B_periph(AT91_PIN_PA28, 0); /* ERXCK */ - at91_set_B_periph(AT91_PIN_PA6, 0); /* ETX2 */ - at91_set_B_periph(AT91_PIN_PA7, 0); /* ETX3 */ - at91_set_B_periph(AT91_PIN_PA27, 0); /* ETXER */ - } - - eth_data = *data; - platform_device_register(&at91sam9g45_eth_device); -} -#else -void __init at91_add_device_eth(struct macb_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct mci_platform_data mmc0_data, mmc1_data; - -static struct resource mmc0_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_MCI0, - .end = AT91SAM9G45_BASE_MCI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9g45_mmc0_device = { - .name = "atmel_mci", - .id = 0, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc0_data, - }, - .resource = mmc0_resources, - .num_resources = ARRAY_SIZE(mmc0_resources), -}; - -static struct resource mmc1_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_MCI1, - .end = AT91SAM9G45_BASE_MCI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9g45_mmc1_device = { - .name = "atmel_mci", - .id = 1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc1_data, - }, - .resource = mmc1_resources, - .num_resources = ARRAY_SIZE(mmc1_resources), -}; - -/* Consider only one slot : slot 0 */ -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) -{ - - if (!data) - return; - - /* Must have at least one usable slot */ - if (!data->slot[0].bus_width) - return; - -#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) - { - struct at_dma_slave *atslave; - struct mci_dma_data *alt_atslave; - - alt_atslave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL); - atslave = &alt_atslave->sdata; - - /* DMA slave channel configuration */ - atslave->dma_dev = &at_hdmac_device.dev; - atslave->cfg = ATC_FIFOCFG_HALFFIFO - | ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW; - if (mmc_id == 0) /* MCI0 */ - atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI0) - | ATC_DST_PER(AT_DMA_ID_MCI0); - - else /* MCI1 */ - atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI1) - | ATC_DST_PER(AT_DMA_ID_MCI1); - - data->dma_slave = alt_atslave; - } -#endif - - - /* input/irq */ - if (gpio_is_valid(data->slot[0].detect_pin)) { - at91_set_gpio_input(data->slot[0].detect_pin, 1); - at91_set_deglitch(data->slot[0].detect_pin, 1); - } - if (gpio_is_valid(data->slot[0].wp_pin)) - at91_set_gpio_input(data->slot[0].wp_pin, 1); - - if (mmc_id == 0) { /* MCI0 */ - - /* CLK */ - at91_set_A_periph(AT91_PIN_PA0, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */ - at91_set_A_periph(AT91_PIN_PA2, 1); - if (data->slot[0].bus_width == 4) { - at91_set_A_periph(AT91_PIN_PA3, 1); - at91_set_A_periph(AT91_PIN_PA4, 1); - at91_set_A_periph(AT91_PIN_PA5, 1); - if (data->slot[0].bus_width == 8) { - at91_set_A_periph(AT91_PIN_PA6, 1); - at91_set_A_periph(AT91_PIN_PA7, 1); - at91_set_A_periph(AT91_PIN_PA8, 1); - at91_set_A_periph(AT91_PIN_PA9, 1); - } - } - - mmc0_data = *data; - platform_device_register(&at91sam9g45_mmc0_device); - - } else { /* MCI1 */ - - /* CLK */ - at91_set_A_periph(AT91_PIN_PA31, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PA22, 1); - - /* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */ - at91_set_A_periph(AT91_PIN_PA23, 1); - if (data->slot[0].bus_width == 4) { - at91_set_A_periph(AT91_PIN_PA24, 1); - at91_set_A_periph(AT91_PIN_PA25, 1); - at91_set_A_periph(AT91_PIN_PA26, 1); - if (data->slot[0].bus_width == 8) { - at91_set_A_periph(AT91_PIN_PA27, 1); - at91_set_A_periph(AT91_PIN_PA28, 1); - at91_set_A_periph(AT91_PIN_PA29, 1); - at91_set_A_periph(AT91_PIN_PA30, 1); - } - } - - mmc1_data = *data; - platform_device_register(&at91sam9g45_mmc1_device); - - } -} -#else -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * NAND / SmartMedia - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) -static struct atmel_nand_data nand_data; - -#define NAND_BASE AT91_CHIPSELECT_3 - -static struct resource nand_resources[] = { - [0] = { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91SAM9G45_BASE_ECC, - .end = AT91SAM9G45_BASE_ECC + SZ_512 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91sam9g45_nand_device = { - .name = "atmel_nand", - .id = -1, - .dev = { - .platform_data = &nand_data, - }, - .resource = nand_resources, - .num_resources = ARRAY_SIZE(nand_resources), -}; - -void __init at91_add_device_nand(struct atmel_nand_data *data) -{ - unsigned long csa; - - if (!data) - return; - - csa = at91_matrix_read(AT91_MATRIX_EBICSA); - at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); - - /* enable pin */ - if (gpio_is_valid(data->enable_pin)) - at91_set_gpio_output(data->enable_pin, 1); - - /* ready/busy pin */ - if (gpio_is_valid(data->rdy_pin)) - at91_set_gpio_input(data->rdy_pin, 1); - - /* card detect pin */ - if (gpio_is_valid(data->det_pin)) - at91_set_gpio_input(data->det_pin, 1); - - nand_data = *data; - platform_device_register(&at91sam9g45_nand_device); -} -#else -void __init at91_add_device_nand(struct atmel_nand_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * TWI (i2c) - * -------------------------------------------------------------------- */ - -/* - * Prefer the GPIO code since the TWI controller isn't robust - * (gets overruns and underruns under load) and can only issue - * repeated STARTs in one scenario (the driver doesn't yet handle them). - */ -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) -static struct i2c_gpio_platform_data pdata_i2c0 = { - .sda_pin = AT91_PIN_PA20, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PA21, - .scl_is_open_drain = 1, - .udelay = 5, /* ~100 kHz */ -}; - -static struct platform_device at91sam9g45_twi0_device = { - .name = "i2c-gpio", - .id = 0, - .dev.platform_data = &pdata_i2c0, -}; - -static struct i2c_gpio_platform_data pdata_i2c1 = { - .sda_pin = AT91_PIN_PB10, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PB11, - .scl_is_open_drain = 1, - .udelay = 5, /* ~100 kHz */ -}; - -static struct platform_device at91sam9g45_twi1_device = { - .name = "i2c-gpio", - .id = 1, - .dev.platform_data = &pdata_i2c1, -}; - -void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) -{ - i2c_register_board_info(i2c_id, devices, nr_devices); - - if (i2c_id == 0) { - at91_set_GPIO_periph(AT91_PIN_PA20, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PA20, 1); - - at91_set_GPIO_periph(AT91_PIN_PA21, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PA21, 1); - - platform_device_register(&at91sam9g45_twi0_device); - } else { - at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PB10, 1); - - at91_set_GPIO_periph(AT91_PIN_PB11, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PB11, 1); - - platform_device_register(&at91sam9g45_twi1_device); - } -} - -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) -static struct resource twi0_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_TWI0, - .end = AT91SAM9G45_BASE_TWI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9g45_twi0_device = { - .name = "i2c-at91sam9g10", - .id = 0, - .resource = twi0_resources, - .num_resources = ARRAY_SIZE(twi0_resources), -}; - -static struct resource twi1_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_TWI1, - .end = AT91SAM9G45_BASE_TWI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9g45_twi1_device = { - .name = "i2c-at91sam9g10", - .id = 1, - .resource = twi1_resources, - .num_resources = ARRAY_SIZE(twi1_resources), -}; - -void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) -{ - i2c_register_board_info(i2c_id, devices, nr_devices); - - /* pins used for TWI interface */ - if (i2c_id == 0) { - at91_set_A_periph(AT91_PIN_PA20, 0); /* TWD */ - at91_set_A_periph(AT91_PIN_PA21, 0); /* TWCK */ - - platform_device_register(&at91sam9g45_twi0_device); - } else { - at91_set_A_periph(AT91_PIN_PB10, 0); /* TWD */ - at91_set_A_periph(AT91_PIN_PB11, 0); /* TWCK */ - - platform_device_register(&at91sam9g45_twi1_device); - } -} -#else -void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * SPI - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = DMA_BIT_MASK(32); - -static struct resource spi0_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_SPI0, - .end = AT91SAM9G45_BASE_SPI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9g45_spi0_device = { - .name = "atmel_spi", - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -}; - -static const unsigned spi0_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PB18, AT91_PIN_PB19, AT91_PIN_PD27 }; - -static struct resource spi1_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_SPI1, - .end = AT91SAM9G45_BASE_SPI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9g45_spi1_device = { - .name = "atmel_spi", - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -}; - -static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB17, AT91_PIN_PD28, AT91_PIN_PD18, AT91_PIN_PD19 }; - -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -{ - int i; - unsigned long cs_pin; - short enable_spi0 = 0; - short enable_spi1 = 0; - - /* Choose SPI chip-selects */ - for (i = 0; i < nr_devices; i++) { - if (devices[i].controller_data) - cs_pin = (unsigned long) devices[i].controller_data; - else if (devices[i].bus_num == 0) - cs_pin = spi0_standard_cs[devices[i].chip_select]; - else - cs_pin = spi1_standard_cs[devices[i].chip_select]; - - if (!gpio_is_valid(cs_pin)) - continue; - - if (devices[i].bus_num == 0) - enable_spi0 = 1; - else - enable_spi1 = 1; - - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; - } - - spi_register_board_info(devices, nr_devices); - - /* Configure SPI bus(es) */ - if (enable_spi0) { - at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI0_MISO */ - at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */ - at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */ - - platform_device_register(&at91sam9g45_spi0_device); - } - if (enable_spi1) { - at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_MISO */ - at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */ - at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */ - - platform_device_register(&at91sam9g45_spi1_device); - } -} -#else -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * AC97 - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE) -static u64 ac97_dmamask = DMA_BIT_MASK(32); -static struct ac97c_platform_data ac97_data; - -static struct resource ac97_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_AC97C, - .end = AT91SAM9G45_BASE_AC97C + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9g45_ac97_device = { - .name = "atmel_ac97c", - .id = 0, - .dev = { - .dma_mask = &ac97_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &ac97_data, - }, - .resource = ac97_resources, - .num_resources = ARRAY_SIZE(ac97_resources), -}; - -void __init at91_add_device_ac97(struct ac97c_platform_data *data) -{ - if (!data) - return; - - at91_set_A_periph(AT91_PIN_PD8, 0); /* AC97FS */ - at91_set_A_periph(AT91_PIN_PD9, 0); /* AC97CK */ - at91_set_A_periph(AT91_PIN_PD7, 0); /* AC97TX */ - at91_set_A_periph(AT91_PIN_PD6, 0); /* AC97RX */ - - /* reset */ - if (gpio_is_valid(data->reset_pin)) - at91_set_gpio_output(data->reset_pin, 0); - - ac97_data = *data; - platform_device_register(&at91sam9g45_ac97_device); -} -#else -void __init at91_add_device_ac97(struct ac97c_platform_data *data) {} -#endif - -/* -------------------------------------------------------------------- - * Image Sensor Interface - * -------------------------------------------------------------------- */ -#if defined(CONFIG_VIDEO_ATMEL_ISI) || defined(CONFIG_VIDEO_ATMEL_ISI_MODULE) -static u64 isi_dmamask = DMA_BIT_MASK(32); -static struct isi_platform_data isi_data; - -struct resource isi_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_ISI, - .end = AT91SAM9G45_BASE_ISI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9g45_isi_device = { - .name = "atmel_isi", - .id = 0, - .dev = { - .dma_mask = &isi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &isi_data, - }, - .resource = isi_resources, - .num_resources = ARRAY_SIZE(isi_resources), -}; - -static struct clk_lookup isi_mck_lookups[] = { - CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", NULL), -}; - -void __init at91_add_device_isi(struct isi_platform_data *data, - bool use_pck_as_mck) -{ - struct clk *pck; - struct clk *parent; - - if (!data) - return; - isi_data = *data; - - at91_set_A_periph(AT91_PIN_PB20, 0); /* ISI_D0 */ - at91_set_A_periph(AT91_PIN_PB21, 0); /* ISI_D1 */ - at91_set_A_periph(AT91_PIN_PB22, 0); /* ISI_D2 */ - at91_set_A_periph(AT91_PIN_PB23, 0); /* ISI_D3 */ - at91_set_A_periph(AT91_PIN_PB24, 0); /* ISI_D4 */ - at91_set_A_periph(AT91_PIN_PB25, 0); /* ISI_D5 */ - at91_set_A_periph(AT91_PIN_PB26, 0); /* ISI_D6 */ - at91_set_A_periph(AT91_PIN_PB27, 0); /* ISI_D7 */ - at91_set_A_periph(AT91_PIN_PB28, 0); /* ISI_PCK */ - at91_set_A_periph(AT91_PIN_PB30, 0); /* ISI_HSYNC */ - at91_set_A_periph(AT91_PIN_PB29, 0); /* ISI_VSYNC */ - at91_set_B_periph(AT91_PIN_PB8, 0); /* ISI_PD8 */ - at91_set_B_periph(AT91_PIN_PB9, 0); /* ISI_PD9 */ - at91_set_B_periph(AT91_PIN_PB10, 0); /* ISI_PD10 */ - at91_set_B_periph(AT91_PIN_PB11, 0); /* ISI_PD11 */ - - platform_device_register(&at91sam9g45_isi_device); - - if (use_pck_as_mck) { - at91_set_B_periph(AT91_PIN_PB31, 0); /* ISI_MCK (PCK1) */ - - pck = clk_get(NULL, "pck1"); - parent = clk_get(NULL, "plla"); - - BUG_ON(IS_ERR(pck) || IS_ERR(parent)); - - if (clk_set_parent(pck, parent)) { - pr_err("Failed to set PCK's parent\n"); - } else { - /* Register PCK as ISI_MCK */ - isi_mck_lookups[0].clk = pck; - clkdev_add_table(isi_mck_lookups, - ARRAY_SIZE(isi_mck_lookups)); - } - - clk_put(pck); - clk_put(parent); - } -} -#else -void __init at91_add_device_isi(struct isi_platform_data *data, - bool use_pck_as_mck) {} -#endif - - -/* -------------------------------------------------------------------- - * LCD Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static u64 lcdc_dmamask = DMA_BIT_MASK(32); -static struct atmel_lcdfb_pdata lcdc_data; - -static struct resource lcdc_resources[] = { - [0] = { - .start = AT91SAM9G45_LCDC_BASE, - .end = AT91SAM9G45_LCDC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_lcdc_device = { - .id = 0, - .dev = { - .dma_mask = &lcdc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &lcdc_data, - }, - .resource = lcdc_resources, - .num_resources = ARRAY_SIZE(lcdc_resources), -}; - -void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) -{ - if (!data) - return; - - if (cpu_is_at91sam9g45es()) - at91_lcdc_device.name = "at91sam9g45es-lcdfb"; - else - at91_lcdc_device.name = "at91sam9g45-lcdfb"; - - at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */ - - at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */ - at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */ - at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */ - at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */ - at91_set_A_periph(AT91_PIN_PE6, 0); /* LCDDEN */ - at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */ - at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */ - at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */ - at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */ - at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */ - at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */ - at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */ - at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */ - at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */ - at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */ - at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */ - at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */ - at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */ - at91_set_A_periph(AT91_PIN_PE20, 0); /* LCDD13 */ - at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */ - at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */ - at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */ - at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */ - at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */ - at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */ - at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */ - at91_set_A_periph(AT91_PIN_PE28, 0); /* LCDD21 */ - at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */ - at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */ - - lcdc_data = *data; - platform_device_register(&at91_lcdc_device); -} -#else -void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Timer/Counter block - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_ATMEL_TCLIB -static struct resource tcb0_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_TCB0, - .end = AT91SAM9G45_BASE_TCB0 + SZ_256 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9g45_tcb0_device = { - .name = "atmel_tcb", - .id = 0, - .resource = tcb0_resources, - .num_resources = ARRAY_SIZE(tcb0_resources), -}; - -/* TCB1 begins with TC3 */ -static struct resource tcb1_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_TCB1, - .end = AT91SAM9G45_BASE_TCB1 + SZ_256 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9g45_tcb1_device = { - .name = "atmel_tcb", - .id = 1, - .resource = tcb1_resources, - .num_resources = ARRAY_SIZE(tcb1_resources), -}; - -static void __init at91_add_device_tc(void) -{ - platform_device_register(&at91sam9g45_tcb0_device); - platform_device_register(&at91sam9g45_tcb1_device); -} -#else -static void __init at91_add_device_tc(void) { } -#endif - - -/* -------------------------------------------------------------------- - * RTC - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE) -static struct resource rtc_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_RTC, - .end = AT91SAM9G45_BASE_RTC + SZ_256 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91_ID_SYS, - .end = NR_IRQS_LEGACY + AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9g45_rtc_device = { - .name = "at91_rtc", - .id = -1, - .resource = rtc_resources, - .num_resources = ARRAY_SIZE(rtc_resources), -}; - -static void __init at91_add_device_rtc(void) -{ - platform_device_register(&at91sam9g45_rtc_device); -} -#else -static void __init at91_add_device_rtc(void) {} -#endif - - -/* -------------------------------------------------------------------- - * ADC and touchscreen - * -------------------------------------------------------------------- */ - -#if IS_ENABLED(CONFIG_AT91_ADC) -static struct at91_adc_data adc_data; - -static struct resource adc_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_TSC, - .end = AT91SAM9G45_BASE_TSC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device at91_adc_device = { - .name = "at91sam9g45-adc", - .id = -1, - .dev = { - .platform_data = &adc_data, - }, - .resource = adc_resources, - .num_resources = ARRAY_SIZE(adc_resources), -}; - -static struct at91_adc_trigger at91_adc_triggers[] = { - [0] = { - .name = "external-rising", - .value = 1, - .is_external = true, - }, - [1] = { - .name = "external-falling", - .value = 2, - .is_external = true, - }, - [2] = { - .name = "external-any", - .value = 3, - .is_external = true, - }, - [3] = { - .name = "continuous", - .value = 6, - .is_external = false, - }, -}; - -void __init at91_add_device_adc(struct at91_adc_data *data) -{ - if (!data) - return; - - if (test_bit(0, &data->channels_used)) - at91_set_gpio_input(AT91_PIN_PD20, 0); - if (test_bit(1, &data->channels_used)) - at91_set_gpio_input(AT91_PIN_PD21, 0); - if (test_bit(2, &data->channels_used)) - at91_set_gpio_input(AT91_PIN_PD22, 0); - if (test_bit(3, &data->channels_used)) - at91_set_gpio_input(AT91_PIN_PD23, 0); - if (test_bit(4, &data->channels_used)) - at91_set_gpio_input(AT91_PIN_PD24, 0); - if (test_bit(5, &data->channels_used)) - at91_set_gpio_input(AT91_PIN_PD25, 0); - if (test_bit(6, &data->channels_used)) - at91_set_gpio_input(AT91_PIN_PD26, 0); - if (test_bit(7, &data->channels_used)) - at91_set_gpio_input(AT91_PIN_PD27, 0); - - if (data->use_external_triggers) - at91_set_A_periph(AT91_PIN_PD28, 0); - - data->startup_time = 40; - data->trigger_number = 4; - data->trigger_list = at91_adc_triggers; - - adc_data = *data; - platform_device_register(&at91_adc_device); -} -#else -void __init at91_add_device_adc(struct at91_adc_data *data) {} -#endif - -/* -------------------------------------------------------------------- - * RTT - * -------------------------------------------------------------------- */ - -static struct resource rtt_resources[] = { - { - .start = AT91SAM9G45_BASE_RTT, - .end = AT91SAM9G45_BASE_RTT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device at91sam9g45_rtt_device = { - .name = "at91_rtt", - .id = 0, - .resource = rtt_resources, -}; - -#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) -static void __init at91_add_device_rtt_rtc(void) -{ - at91sam9g45_rtt_device.name = "rtc-at91sam9"; - /* - * The second resource is needed: - * GPBR will serve as the storage for RTC time offset - */ - at91sam9g45_rtt_device.num_resources = 3; - rtt_resources[1].start = AT91SAM9G45_BASE_GPBR + - 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; - rtt_resources[1].end = rtt_resources[1].start + 3; - rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; - rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; -} -#else -static void __init at91_add_device_rtt_rtc(void) -{ - /* Only one resource is needed: RTT not used as RTC */ - at91sam9g45_rtt_device.num_resources = 1; -} -#endif - -static void __init at91_add_device_rtt(void) -{ - at91_add_device_rtt_rtc(); - platform_device_register(&at91sam9g45_rtt_device); -} - - -/* -------------------------------------------------------------------- - * TRNG - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_HW_RANDOM_ATMEL) || defined(CONFIG_HW_RANDOM_ATMEL_MODULE) -static struct resource trng_resources[] = { - { - .start = AT91SAM9G45_BASE_TRNG, - .end = AT91SAM9G45_BASE_TRNG + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device at91sam9g45_trng_device = { - .name = "atmel-trng", - .id = -1, - .resource = trng_resources, - .num_resources = ARRAY_SIZE(trng_resources), -}; - -static void __init at91_add_device_trng(void) -{ - platform_device_register(&at91sam9g45_trng_device); -} -#else -static void __init at91_add_device_trng(void) {} -#endif - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) -static struct resource wdt_resources[] = { - { - .start = AT91SAM9G45_BASE_WDT, - .end = AT91SAM9G45_BASE_WDT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91sam9g45_wdt_device = { - .name = "at91_wdt", - .id = -1, - .resource = wdt_resources, - .num_resources = ARRAY_SIZE(wdt_resources), -}; - -static void __init at91_add_device_watchdog(void) -{ - platform_device_register(&at91sam9g45_wdt_device); -} -#else -static void __init at91_add_device_watchdog(void) {} -#endif - - -/* -------------------------------------------------------------------- - * PWM - * --------------------------------------------------------------------*/ - -#if IS_ENABLED(CONFIG_PWM_ATMEL) -static struct resource pwm_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_PWMC, - .end = AT91SAM9G45_BASE_PWMC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9g45_pwm0_device = { - .name = "at91sam9rl-pwm", - .id = -1, - .resource = pwm_resources, - .num_resources = ARRAY_SIZE(pwm_resources), -}; - -void __init at91_add_device_pwm(u32 mask) -{ - if (mask & (1 << AT91_PWM0)) - at91_set_B_periph(AT91_PIN_PD24, 1); /* enable PWM0 */ - - if (mask & (1 << AT91_PWM1)) - at91_set_B_periph(AT91_PIN_PD31, 1); /* enable PWM1 */ - - if (mask & (1 << AT91_PWM2)) - at91_set_B_periph(AT91_PIN_PD26, 1); /* enable PWM2 */ - - if (mask & (1 << AT91_PWM3)) - at91_set_B_periph(AT91_PIN_PD0, 1); /* enable PWM3 */ - - platform_device_register(&at91sam9g45_pwm0_device); -} -#else -void __init at91_add_device_pwm(u32 mask) {} -#endif - - -/* -------------------------------------------------------------------- - * SSC -- Synchronous Serial Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) -static u64 ssc0_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc0_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_SSC0, - .end = AT91SAM9G45_BASE_SSC0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9g45_ssc0_device = { - .name = "at91sam9g45_ssc", - .id = 0, - .dev = { - .dma_mask = &ssc0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc0_resources, - .num_resources = ARRAY_SIZE(ssc0_resources), -}; - -static inline void configure_ssc0_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PD1, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PD0, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PD2, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PD3, 1); - if (pins & ATMEL_SSC_RK) - at91_set_A_periph(AT91_PIN_PD4, 1); - if (pins & ATMEL_SSC_RF) - at91_set_A_periph(AT91_PIN_PD5, 1); -} - -static u64 ssc1_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc1_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_SSC1, - .end = AT91SAM9G45_BASE_SSC1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9g45_ssc1_device = { - .name = "at91sam9g45_ssc", - .id = 1, - .dev = { - .dma_mask = &ssc1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc1_resources, - .num_resources = ARRAY_SIZE(ssc1_resources), -}; - -static inline void configure_ssc1_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PD14, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PD12, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PD10, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PD11, 1); - if (pins & ATMEL_SSC_RK) - at91_set_A_periph(AT91_PIN_PD13, 1); - if (pins & ATMEL_SSC_RF) - at91_set_A_periph(AT91_PIN_PD15, 1); -} - -/* - * SSC controllers are accessed through library code, instead of any - * kind of all-singing/all-dancing driver. For example one could be - * used by a particular I2S audio codec's driver, while another one - * on the same system might be used by a custom data capture driver. - */ -void __init at91_add_device_ssc(unsigned id, unsigned pins) -{ - struct platform_device *pdev; - - /* - * NOTE: caller is responsible for passing information matching - * "pins" to whatever will be using each particular controller. - */ - switch (id) { - case AT91SAM9G45_ID_SSC0: - pdev = &at91sam9g45_ssc0_device; - configure_ssc0_pins(pins); - break; - case AT91SAM9G45_ID_SSC1: - pdev = &at91sam9g45_ssc1_device; - configure_ssc1_pins(pins); - break; - default: - return; - } - - platform_device_register(pdev); -} - -#else -void __init at91_add_device_ssc(unsigned id, unsigned pins) {} -#endif - - -/* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SERIAL_ATMEL) -static struct resource dbgu_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_DBGU, - .end = AT91SAM9G45_BASE_DBGU + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91_ID_SYS, - .end = NR_IRQS_LEGACY + AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data dbgu_data = { - .use_dma_tx = 0, - .use_dma_rx = 0, -}; - -static u64 dbgu_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9g45_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { - .dma_mask = &dbgu_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -}; - -static inline void configure_dbgu_pins(void) -{ - at91_set_A_periph(AT91_PIN_PB12, 0); /* DRXD */ - at91_set_A_periph(AT91_PIN_PB13, 1); /* DTXD */ -} - -static struct resource uart0_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_US0, - .end = AT91SAM9G45_BASE_US0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US0, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart0_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart0_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9g45_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { - .dma_mask = &uart0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), -}; - -static inline void configure_usart0_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PB19, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PB18, 0); /* RXD0 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PB17, 0); /* RTS0 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PB15, 0); /* CTS0 */ -} - -static struct resource uart1_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_US1, - .end = AT91SAM9G45_BASE_US1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US1, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart1_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart1_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9g45_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { - .dma_mask = &uart1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), -}; - -static inline void configure_usart1_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD1 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PD16, 0); /* RTS1 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PD17, 0); /* CTS1 */ -} - -static struct resource uart2_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_US2, - .end = AT91SAM9G45_BASE_US2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US2, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart2_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart2_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9g45_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { - .dma_mask = &uart2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), -}; - -static inline void configure_usart2_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD2 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PC9, 0); /* RTS2 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PC11, 0); /* CTS2 */ -} - -static struct resource uart3_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_US3, - .end = AT91SAM9G45_BASE_US3 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US3, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US3, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart3_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart3_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9g45_uart3_device = { - .name = "atmel_usart", - .id = 4, - .dev = { - .dma_mask = &uart3_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart3_data, - }, - .resource = uart3_resources, - .num_resources = ARRAY_SIZE(uart3_resources), -}; - -static inline void configure_usart3_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD3 */ - at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD3 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PA23, 0); /* RTS3 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PA24, 0); /* CTS3 */ -} - -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ - -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -{ - struct platform_device *pdev; - struct atmel_uart_data *pdata; - - switch (id) { - case 0: /* DBGU */ - pdev = &at91sam9g45_dbgu_device; - configure_dbgu_pins(); - break; - case AT91SAM9G45_ID_US0: - pdev = &at91sam9g45_uart0_device; - configure_usart0_pins(pins); - break; - case AT91SAM9G45_ID_US1: - pdev = &at91sam9g45_uart1_device; - configure_usart1_pins(pins); - break; - case AT91SAM9G45_ID_US2: - pdev = &at91sam9g45_uart2_device; - configure_usart2_pins(pins); - break; - case AT91SAM9G45_ID_US3: - pdev = &at91sam9g45_uart3_device; - configure_usart3_pins(pins); - break; - default: - return; - } - pdata = pdev->dev.platform_data; - pdata->num = portnr; /* update to mapped ID */ - - if (portnr < ATMEL_MAX_UART) - at91_uarts[portnr] = pdev; -} - -void __init at91_add_device_serial(void) -{ - int i; - - for (i = 0; i < ATMEL_MAX_UART; i++) { - if (at91_uarts[i]) - platform_device_register(at91_uarts[i]); - } -} -#else -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_add_device_serial(void) {} -#endif - -/* -------------------------------------------------------------------- - * SHA1/SHA256 - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_CRYPTO_DEV_ATMEL_SHA) || defined(CONFIG_CRYPTO_DEV_ATMEL_SHA_MODULE) -static struct resource sha_resources[] = { - { - .start = AT91SAM9G45_BASE_SHA, - .end = AT91SAM9G45_BASE_SHA + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9g45_sha_device = { - .name = "atmel_sha", - .id = -1, - .resource = sha_resources, - .num_resources = ARRAY_SIZE(sha_resources), -}; - -static void __init at91_add_device_sha(void) -{ - platform_device_register(&at91sam9g45_sha_device); -} -#else -static void __init at91_add_device_sha(void) {} -#endif - -/* -------------------------------------------------------------------- - * DES/TDES - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_CRYPTO_DEV_ATMEL_TDES) || defined(CONFIG_CRYPTO_DEV_ATMEL_TDES_MODULE) -static struct resource tdes_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_TDES, - .end = AT91SAM9G45_BASE_TDES + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9g45_tdes_device = { - .name = "atmel_tdes", - .id = -1, - .resource = tdes_resources, - .num_resources = ARRAY_SIZE(tdes_resources), -}; - -static void __init at91_add_device_tdes(void) -{ - platform_device_register(&at91sam9g45_tdes_device); -} -#else -static void __init at91_add_device_tdes(void) {} -#endif - -/* -------------------------------------------------------------------- - * AES - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_CRYPTO_DEV_ATMEL_AES) || defined(CONFIG_CRYPTO_DEV_ATMEL_AES_MODULE) -static struct crypto_platform_data aes_data; -static struct crypto_dma_data alt_atslave; -static u64 aes_dmamask = DMA_BIT_MASK(32); - -static struct resource aes_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_AES, - .end = AT91SAM9G45_BASE_AES + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9g45_aes_device = { - .name = "atmel_aes", - .id = -1, - .dev = { - .dma_mask = &aes_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &aes_data, - }, - .resource = aes_resources, - .num_resources = ARRAY_SIZE(aes_resources), -}; - -static void __init at91_add_device_aes(void) -{ - struct at_dma_slave *atslave; - - /* DMA TX slave channel configuration */ - atslave = &alt_atslave.txdata; - atslave->dma_dev = &at_hdmac_device.dev; - atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_SRC_H2SEL_HW | - ATC_SRC_PER(AT_DMA_ID_AES_RX); - - /* DMA RX slave channel configuration */ - atslave = &alt_atslave.rxdata; - atslave->dma_dev = &at_hdmac_device.dev; - atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_DST_H2SEL_HW | - ATC_DST_PER(AT_DMA_ID_AES_TX); - - aes_data.dma_slave = &alt_atslave; - platform_device_register(&at91sam9g45_aes_device); -} -#else -static void __init at91_add_device_aes(void) {} -#endif - -/* -------------------------------------------------------------------- */ -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init at91_add_standard_devices(void) -{ - if (of_have_populated_dt()) - return 0; - - at91_add_device_hdmac(); - at91_add_device_rtc(); - at91_add_device_rtt(); - at91_add_device_trng(); - at91_add_device_watchdog(); - at91_add_device_tc(); - at91_add_device_sha(); - at91_add_device_tdes(); - at91_add_device_aes(); - return 0; -} - -arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index c8988fe5ff7..dee569b1987 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -6,219 +6,11 @@ * Licensed under GPLv2 or later. */ -#include <linux/module.h> -#include <linux/dma-mapping.h> -#include <linux/clk/at91_pmc.h> +#include <asm/system_misc.h> +#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/at91sam9n12.h> -#include <mach/cpu.h> - -#include "board.h" #include "soc.h" #include "generic.h" -#include "sam9_smc.h" - -#if defined(CONFIG_OLD_CLK_AT91) -#include "clock.h" -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk pioAB_clk = { - .name = "pioAB_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_PIOAB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioCD_clk = { - .name = "pioCD_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_PIOCD, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_USART0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_USART1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_USART2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart3_clk = { - .name = "usart3_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_USART3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi0_clk = { - .name = "twi0_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_TWI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi1_clk = { - .name = "twi1_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_TWI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc_clk = { - .name = "mci_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_MCI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk uart0_clk = { - .name = "uart0_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_UART0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk uart1_clk = { - .name = "uart1_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_UART1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tcb_clk = { - .name = "tcb_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_TCB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pwm_clk = { - .name = "pwm_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_PWM, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk adc_clk = { - .name = "adc_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_ADC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk dma_clk = { - .name = "dma_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_DMA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk uhp_clk = { - .name = "uhp", - .pmc_mask = 1 << AT91SAM9N12_ID_UHP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udp_clk = { - .name = "udp_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_UDP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk lcdc_clk = { - .name = "lcdc_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_LCDC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc_clk = { - .name = "ssc_clk", - .pmc_mask = 1 << AT91SAM9N12_ID_SSC, - .type = CLK_TYPE_PERIPHERAL, -}; - -static struct clk *periph_clocks[] __initdata = { - &pioAB_clk, - &pioCD_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &usart3_clk, - &twi0_clk, - &twi1_clk, - &mmc_clk, - &spi0_clk, - &spi1_clk, - &lcdc_clk, - &uart0_clk, - &uart1_clk, - &tcb_clk, - &pwm_clk, - &adc_clk, - &dma_clk, - &uhp_clk, - &udp_clk, - &ssc_clk, -}; - -static struct clk_lookup periph_clocks_lookups[] = { - /* lookup table for DT entries */ - CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), - CLKDEV_CON_DEV_ID("usart", "f801c000.serial", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk), - CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), - CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk), - CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk), - CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc_clk), - CLKDEV_CON_DEV_ID(NULL, "f0010000.ssc", &ssc_clk), - CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk), - CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), - CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), - CLKDEV_CON_DEV_ID("spi_clk", "f0000000.spi", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi1_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk), - CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCD_clk), - /* additional fake clock for macb_hclk */ - CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &uhp_clk), - CLKDEV_CON_DEV_ID("ohci_clk", "500000.ohci", &uhp_clk), - CLKDEV_CON_DEV_ID(NULL, "f8034000.pwm", &pwm_clk), -}; - -/* - * The two programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; - -static void __init at91sam9n12_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - clk_register(&pck0); - clk_register(&pck1); - - clkdev_add_table(periph_clocks_lookups, - ARRAY_SIZE(periph_clocks_lookups)); - -} -#else -#define at91sam9n12_register_clocks NULL -#endif /* -------------------------------------------------------------------- * AT91SAM9N12 processor initialization @@ -236,6 +28,5 @@ static void __init at91sam9n12_initialize(void) AT91_SOC_START(at91sam9n12) .map_io = at91sam9n12_map_io, - .register_clocks = at91sam9n12_register_clocks, .init = at91sam9n12_initialize, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index f553e4ea034..f25b9aec9c5 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -9,284 +9,14 @@ * more details. */ -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/clk/at91_pmc.h> - -#include <asm/proc-fns.h> -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> #include <asm/system_misc.h> +#include <asm/irq.h> #include <mach/cpu.h> #include <mach/at91_dbgu.h> -#include <mach/at91sam9rl.h> #include <mach/hardware.h> -#include "at91_aic.h" #include "soc.h" #include "generic.h" -#include "sam9_smc.h" -#include "pm.h" - -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ -#if defined(CONFIG_OLD_CLK_AT91) -#include "clock.h" - -/* - * The peripheral clocks. - */ -static struct clk pioA_clk = { - .name = "pioA_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_PIOA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioB_clk = { - .name = "pioB_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_PIOB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioC_clk = { - .name = "pioC_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_PIOC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioD_clk = { - .name = "pioD_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_PIOD, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_US0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_US1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_US2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart3_clk = { - .name = "usart3_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_US3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc_clk = { - .name = "mci_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_MCI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi0_clk = { - .name = "twi0_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_TWI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi1_clk = { - .name = "twi1_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_TWI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi_clk = { - .name = "spi_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_SPI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc0_clk = { - .name = "ssc0_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_SSC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc1_clk = { - .name = "ssc1_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_SSC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc0_clk = { - .name = "tc0_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_TC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc1_clk = { - .name = "tc1_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_TC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc2_clk = { - .name = "tc2_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_TC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pwm_clk = { - .name = "pwm_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_PWMC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tsc_clk = { - .name = "tsc_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_TSC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk dma_clk = { - .name = "dma_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_DMA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udphs_clk = { - .name = "udphs_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_UDPHS, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk lcdc_clk = { - .name = "lcdc_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_LCDC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ac97_clk = { - .name = "ac97_clk", - .pmc_mask = 1 << AT91SAM9RL_ID_AC97C, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk adc_op_clk = { - .name = "adc_op_clk", - .type = CLK_TYPE_PERIPHERAL, - .rate_hz = 1000000, -}; - -static struct clk *periph_clocks[] __initdata = { - &pioA_clk, - &pioB_clk, - &pioC_clk, - &pioD_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &usart3_clk, - &mmc_clk, - &twi0_clk, - &twi1_clk, - &spi_clk, - &ssc0_clk, - &ssc1_clk, - &tc0_clk, - &tc1_clk, - &tc2_clk, - &pwm_clk, - &tsc_clk, - &dma_clk, - &udphs_clk, - &lcdc_clk, - &ac97_clk, - &adc_op_clk, - // irq0 -}; - -static struct clk_lookup periph_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("hclk", "at91sam9rl-lcdfb.0", &lcdc_clk), - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), - CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), - CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk), - CLKDEV_CON_DEV_ID("pclk", "fffc0000.ssc", &ssc0_clk), - CLKDEV_CON_DEV_ID("pclk", "fffc4000.ssc", &ssc1_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi0_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.1", &twi1_clk), - CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk), - CLKDEV_CON_ID("pioA", &pioA_clk), - CLKDEV_CON_ID("pioB", &pioB_clk), - CLKDEV_CON_ID("pioC", &pioC_clk), - CLKDEV_CON_ID("pioD", &pioD_clk), - /* more lookup table for DT entries */ - CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), - CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "ffffb800.serial", &usart2_clk), - CLKDEV_CON_DEV_ID("usart", "ffffbc00.serial", &usart3_clk), - CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), - CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk), - CLKDEV_CON_DEV_ID("mci_clk", "fffa4000.mmc", &mmc_clk), - CLKDEV_CON_DEV_ID(NULL, "fffa8000.i2c", &twi0_clk), - CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi1_clk), - CLKDEV_CON_DEV_ID(NULL, "fffc8000.pwm", &pwm_clk), - CLKDEV_CON_DEV_ID(NULL, "ffffc800.pwm", &pwm_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), - CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk), - CLKDEV_CON_ID("adc_clk", &tsc_clk), -}; - -static struct clk_lookup usart_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), -}; - -/* - * The two programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; - -static void __init at91sam9rl_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clkdev_add_table(periph_clocks_lookups, - ARRAY_SIZE(periph_clocks_lookups)); - clkdev_add_table(usart_clocks_lookups, - ARRAY_SIZE(usart_clocks_lookups)); - - clk_register(&pck0); - clk_register(&pck1); -} -#endif - -/* -------------------------------------------------------------------- - * GPIO - * -------------------------------------------------------------------- */ - -static struct at91_gpio_bank at91sam9rl_gpio[] __initdata = { - { - .id = AT91SAM9RL_ID_PIOA, - .regbase = AT91SAM9RL_BASE_PIOA, - }, { - .id = AT91SAM9RL_ID_PIOB, - .regbase = AT91SAM9RL_BASE_PIOB, - }, { - .id = AT91SAM9RL_ID_PIOC, - .regbase = AT91SAM9RL_BASE_PIOC, - }, { - .id = AT91SAM9RL_ID_PIOD, - .regbase = AT91SAM9RL_BASE_PIOD, - } -}; /* -------------------------------------------------------------------- * AT91SAM9RL processor initialization @@ -309,121 +39,15 @@ static void __init at91sam9rl_map_io(void) at91_init_sram(0, AT91SAM9RL_SRAM_BASE, sram_size); } -static void __init at91sam9rl_ioremap_registers(void) -{ - at91_ioremap_ramc(0, AT91SAM9RL_BASE_SDRAMC, 512); - at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT); - at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC); - at91_ioremap_matrix(AT91SAM9RL_BASE_MATRIX); - at91_pm_set_standby(at91sam9_sdram_standby); -} - static void __init at91sam9rl_initialize(void) { arm_pm_idle = at91sam9_idle; at91_sysirq_mask_rtc(AT91SAM9RL_BASE_RTC); at91_sysirq_mask_rtt(AT91SAM9RL_BASE_RTT); - - /* Register GPIO subsystem */ - at91_gpio_init(at91sam9rl_gpio, 4); -} - -static struct resource rstc_resources[] = { - [0] = { - .start = AT91SAM9RL_BASE_RSTC, - .end = AT91SAM9RL_BASE_RSTC + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91SAM9RL_BASE_SDRAMC, - .end = AT91SAM9RL_BASE_SDRAMC + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device rstc_device = { - .name = "at91-sam9260-reset", - .resource = rstc_resources, - .num_resources = ARRAY_SIZE(rstc_resources), -}; - -static struct resource shdwc_resources[] = { - [0] = { - .start = AT91SAM9RL_BASE_SHDWC, - .end = AT91SAM9RL_BASE_SHDWC + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device shdwc_device = { - .name = "at91-poweroff", - .resource = shdwc_resources, - .num_resources = ARRAY_SIZE(shdwc_resources), -}; - -static void __init at91sam9rl_register_devices(void) -{ - platform_device_register(&rstc_device); - platform_device_register(&shdwc_device); -} - -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller */ - 7, /* System Peripherals */ - 1, /* Parallel IO Controller A */ - 1, /* Parallel IO Controller B */ - 1, /* Parallel IO Controller C */ - 1, /* Parallel IO Controller D */ - 5, /* USART 0 */ - 5, /* USART 1 */ - 5, /* USART 2 */ - 5, /* USART 3 */ - 0, /* Multimedia Card Interface */ - 6, /* Two-Wire Interface 0 */ - 6, /* Two-Wire Interface 1 */ - 5, /* Serial Peripheral Interface */ - 4, /* Serial Synchronous Controller 0 */ - 4, /* Serial Synchronous Controller 1 */ - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ - 0, - 0, /* Touch Screen Controller */ - 0, /* DMA Controller */ - 2, /* USB Device High speed port */ - 2, /* LCD Controller */ - 6, /* AC97 Controller */ - 0, - 0, - 0, - 0, - 0, - 0, - 0, /* Advanced Interrupt Controller */ -}; - -static void __init at91sam9rl_init_time(void) -{ - at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); } AT91_SOC_START(at91sam9rl) .map_io = at91sam9rl_map_io, - .default_irq_priority = at91sam9rl_default_irq_priority, - .extern_irq = (1 << AT91SAM9RL_ID_IRQ0), - .ioremap_registers = at91sam9rl_ioremap_registers, -#if defined(CONFIG_OLD_CLK_AT91) - .register_clocks = at91sam9rl_register_clocks, -#endif - .register_devices = at91sam9rl_register_devices, .init = at91sam9rl_initialize, - .init_time = at91sam9rl_init_time, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c deleted file mode 100644 index 37d1c9ed456..00000000000 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ /dev/null @@ -1,1260 +0,0 @@ -/* - * Copyright (C) 2007 Atmel Corporation - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/i2c-gpio.h> - -#include <linux/fb.h> -#include <video/atmel_lcdc.h> - -#include <mach/at91sam9rl.h> -#include <mach/at91sam9rl_matrix.h> -#include <mach/at91_matrix.h> -#include <mach/at91sam9_smc.h> -#include <mach/hardware.h> -#include <linux/platform_data/dma-atmel.h> -#include <linux/platform_data/at91_adc.h> - -#include "board.h" -#include "generic.h" -#include "gpio.h" - - -/* -------------------------------------------------------------------- - * HDMAC - AHB DMA Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) -static u64 hdmac_dmamask = DMA_BIT_MASK(32); - -static struct resource hdmac_resources[] = { - [0] = { - .start = AT91SAM9RL_BASE_DMA, - .end = AT91SAM9RL_BASE_DMA + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_DMA, - .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_DMA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at_hdmac_device = { - .name = "at91sam9rl_dma", - .id = -1, - .dev = { - .dma_mask = &hdmac_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = hdmac_resources, - .num_resources = ARRAY_SIZE(hdmac_resources), -}; - -void __init at91_add_device_hdmac(void) -{ - platform_device_register(&at_hdmac_device); -} -#else -void __init at91_add_device_hdmac(void) {} -#endif - -/* -------------------------------------------------------------------- - * USB HS Device (Gadget) - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE) - -static struct resource usba_udc_resources[] = { - [0] = { - .start = AT91SAM9RL_UDPHS_FIFO, - .end = AT91SAM9RL_UDPHS_FIFO + SZ_512K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91SAM9RL_BASE_UDPHS, - .end = AT91SAM9RL_BASE_UDPHS + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_UDPHS, - .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_UDPHS, - .flags = IORESOURCE_IRQ, - }, -}; - -#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \ - [idx] = { \ - .name = nam, \ - .index = idx, \ - .fifo_size = maxpkt, \ - .nr_banks = maxbk, \ - .can_dma = dma, \ - .can_isoc = isoc, \ - } - -static struct usba_ep_data usba_udc_ep[] __initdata = { - EP("ep0", 0, 64, 1, 0, 0), - EP("ep1", 1, 1024, 2, 1, 1), - EP("ep2", 2, 1024, 2, 1, 1), - EP("ep3", 3, 1024, 3, 1, 0), - EP("ep4", 4, 1024, 3, 1, 0), - EP("ep5", 5, 1024, 3, 1, 1), - EP("ep6", 6, 1024, 3, 1, 1), -}; - -#undef EP - -/* - * pdata doesn't have room for any endpoints, so we need to - * append room for the ones we need right after it. - */ -static struct { - struct usba_platform_data pdata; - struct usba_ep_data ep[7]; -} usba_udc_data; - -static struct platform_device at91_usba_udc_device = { - .name = "atmel_usba_udc", - .id = -1, - .dev = { - .platform_data = &usba_udc_data.pdata, - }, - .resource = usba_udc_resources, - .num_resources = ARRAY_SIZE(usba_udc_resources), -}; - -void __init at91_add_device_usba(struct usba_platform_data *data) -{ - /* - * Invalid pins are 0 on AT91, but the usba driver is shared - * with AVR32, which use negative values instead. Once/if - * gpio_is_valid() is ported to AT91, revisit this code. - */ - usba_udc_data.pdata.vbus_pin = -EINVAL; - usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep); - memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep)); - - if (data && gpio_is_valid(data->vbus_pin)) { - at91_set_gpio_input(data->vbus_pin, 0); - at91_set_deglitch(data->vbus_pin, 1); - usba_udc_data.pdata.vbus_pin = data->vbus_pin; - } - - /* Pullup pin is handled internally by USB device peripheral */ - - platform_device_register(&at91_usba_udc_device); -} -#else -void __init at91_add_device_usba(struct usba_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if IS_ENABLED(CONFIG_MMC_ATMELMCI) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct mci_platform_data mmc_data; - -static struct resource mmc_resources[] = { - [0] = { - .start = AT91SAM9RL_BASE_MCI, - .end = AT91SAM9RL_BASE_MCI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_MCI, - .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_MCI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9rl_mmc_device = { - .name = "atmel_mci", - .id = -1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc_data, - }, - .resource = mmc_resources, - .num_resources = ARRAY_SIZE(mmc_resources), -}; - -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) -{ - if (!data) - return; - - if (data->slot[0].bus_width) { - /* input/irq */ - if (gpio_is_valid(data->slot[0].detect_pin)) { - at91_set_gpio_input(data->slot[0].detect_pin, 1); - at91_set_deglitch(data->slot[0].detect_pin, 1); - } - if (gpio_is_valid(data->slot[0].wp_pin)) - at91_set_gpio_input(data->slot[0].wp_pin, 1); - - /* CLK */ - at91_set_A_periph(AT91_PIN_PA2, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA0, 1); - if (data->slot[0].bus_width == 4) { - at91_set_A_periph(AT91_PIN_PA3, 1); - at91_set_A_periph(AT91_PIN_PA4, 1); - at91_set_A_periph(AT91_PIN_PA5, 1); - } - - mmc_data = *data; - platform_device_register(&at91sam9rl_mmc_device); - } -} -#else -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * NAND / SmartMedia - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) -static struct atmel_nand_data nand_data; - -#define NAND_BASE AT91_CHIPSELECT_3 - -static struct resource nand_resources[] = { - [0] = { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91SAM9RL_BASE_ECC, - .end = AT91SAM9RL_BASE_ECC + SZ_512 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device atmel_nand_device = { - .name = "atmel_nand", - .id = -1, - .dev = { - .platform_data = &nand_data, - }, - .resource = nand_resources, - .num_resources = ARRAY_SIZE(nand_resources), -}; - -void __init at91_add_device_nand(struct atmel_nand_data *data) -{ - unsigned long csa; - - if (!data) - return; - - csa = at91_matrix_read(AT91_MATRIX_EBICSA); - at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); - - /* enable pin */ - if (gpio_is_valid(data->enable_pin)) - at91_set_gpio_output(data->enable_pin, 1); - - /* ready/busy pin */ - if (gpio_is_valid(data->rdy_pin)) - at91_set_gpio_input(data->rdy_pin, 1); - - /* card detect pin */ - if (gpio_is_valid(data->det_pin)) - at91_set_gpio_input(data->det_pin, 1); - - at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */ - at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */ - - nand_data = *data; - platform_device_register(&atmel_nand_device); -} - -#else -void __init at91_add_device_nand(struct atmel_nand_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * TWI (i2c) - * -------------------------------------------------------------------- */ - -/* - * Prefer the GPIO code since the TWI controller isn't robust - * (gets overruns and underruns under load) and can only issue - * repeated STARTs in one scenario (the driver doesn't yet handle them). - */ -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = AT91_PIN_PA23, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PA24, - .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ -}; - -static struct platform_device at91sam9rl_twi_device = { - .name = "i2c-gpio", - .id = 0, - .dev.platform_data = &pdata, -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - at91_set_GPIO_periph(AT91_PIN_PA23, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PA23, 1); - - at91_set_GPIO_periph(AT91_PIN_PA24, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PA24, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91sam9rl_twi_device); -} - -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) - -static struct resource twi_resources[] = { - [0] = { - .start = AT91SAM9RL_BASE_TWI0, - .end = AT91SAM9RL_BASE_TWI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TWI0, - .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TWI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9rl_twi_device = { - .name = "i2c-at91sam9g20", - .id = 0, - .resource = twi_resources, - .num_resources = ARRAY_SIZE(twi_resources), -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - /* pins used for TWI interface */ - at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PA23, 1); - - at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PA24, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91sam9rl_twi_device); -} -#else -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * SPI - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = DMA_BIT_MASK(32); - -static struct resource spi_resources[] = { - [0] = { - .start = AT91SAM9RL_BASE_SPI, - .end = AT91SAM9RL_BASE_SPI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SPI, - .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SPI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9rl_spi_device = { - .name = "atmel_spi", - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi_resources, - .num_resources = ARRAY_SIZE(spi_resources), -}; - -static const unsigned spi_standard_cs[4] = { AT91_PIN_PA28, AT91_PIN_PB7, AT91_PIN_PD8, AT91_PIN_PD9 }; - - -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -{ - int i; - unsigned long cs_pin; - - at91_set_A_periph(AT91_PIN_PA25, 0); /* MISO */ - at91_set_A_periph(AT91_PIN_PA26, 0); /* MOSI */ - at91_set_A_periph(AT91_PIN_PA27, 0); /* SPCK */ - - /* Enable SPI chip-selects */ - for (i = 0; i < nr_devices; i++) { - if (devices[i].controller_data) - cs_pin = (unsigned long) devices[i].controller_data; - else - cs_pin = spi_standard_cs[devices[i].chip_select]; - - if (!gpio_is_valid(cs_pin)) - continue; - - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; - } - - spi_register_board_info(devices, nr_devices); - platform_device_register(&at91sam9rl_spi_device); -} -#else -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * AC97 - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE) -static u64 ac97_dmamask = DMA_BIT_MASK(32); -static struct ac97c_platform_data ac97_data; - -static struct resource ac97_resources[] = { - [0] = { - .start = AT91SAM9RL_BASE_AC97C, - .end = AT91SAM9RL_BASE_AC97C + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_AC97C, - .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_AC97C, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9rl_ac97_device = { - .name = "atmel_ac97c", - .id = 0, - .dev = { - .dma_mask = &ac97_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &ac97_data, - }, - .resource = ac97_resources, - .num_resources = ARRAY_SIZE(ac97_resources), -}; - -void __init at91_add_device_ac97(struct ac97c_platform_data *data) -{ - if (!data) - return; - - at91_set_A_periph(AT91_PIN_PD1, 0); /* AC97FS */ - at91_set_A_periph(AT91_PIN_PD2, 0); /* AC97CK */ - at91_set_A_periph(AT91_PIN_PD3, 0); /* AC97TX */ - at91_set_A_periph(AT91_PIN_PD4, 0); /* AC97RX */ - - /* reset */ - if (gpio_is_valid(data->reset_pin)) - at91_set_gpio_output(data->reset_pin, 0); - - ac97_data = *data; - platform_device_register(&at91sam9rl_ac97_device); -} -#else -void __init at91_add_device_ac97(struct ac97c_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * LCD Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static u64 lcdc_dmamask = DMA_BIT_MASK(32); -static struct atmel_lcdfb_pdata lcdc_data; - -static struct resource lcdc_resources[] = { - [0] = { - .start = AT91SAM9RL_LCDC_BASE, - .end = AT91SAM9RL_LCDC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_LCDC, - .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_LCDC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_lcdc_device = { - .name = "at91sam9rl-lcdfb", - .id = 0, - .dev = { - .dma_mask = &lcdc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &lcdc_data, - }, - .resource = lcdc_resources, - .num_resources = ARRAY_SIZE(lcdc_resources), -}; - -void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) -{ - if (!data) { - return; - } - - at91_set_B_periph(AT91_PIN_PC1, 0); /* LCDPWR */ - at91_set_A_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */ - at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */ - at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDDEN */ - at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDCC */ - at91_set_B_periph(AT91_PIN_PC9, 0); /* LCDD3 */ - at91_set_B_periph(AT91_PIN_PC10, 0); /* LCDD4 */ - at91_set_B_periph(AT91_PIN_PC11, 0); /* LCDD5 */ - at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD6 */ - at91_set_B_periph(AT91_PIN_PC13, 0); /* LCDD7 */ - at91_set_B_periph(AT91_PIN_PC15, 0); /* LCDD11 */ - at91_set_B_periph(AT91_PIN_PC16, 0); /* LCDD12 */ - at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD13 */ - at91_set_B_periph(AT91_PIN_PC18, 0); /* LCDD14 */ - at91_set_B_periph(AT91_PIN_PC19, 0); /* LCDD15 */ - at91_set_B_periph(AT91_PIN_PC20, 0); /* LCDD18 */ - at91_set_B_periph(AT91_PIN_PC21, 0); /* LCDD19 */ - at91_set_B_periph(AT91_PIN_PC22, 0); /* LCDD20 */ - at91_set_B_periph(AT91_PIN_PC23, 0); /* LCDD21 */ - at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */ - at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */ - - lcdc_data = *data; - platform_device_register(&at91_lcdc_device); -} -#else -void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Timer/Counter block - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_ATMEL_TCLIB - -static struct resource tcb_resources[] = { - [0] = { - .start = AT91SAM9RL_BASE_TCB0, - .end = AT91SAM9RL_BASE_TCB0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC0, - .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC0, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC1, - .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC1, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC2, - .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9rl_tcb_device = { - .name = "atmel_tcb", - .id = 0, - .resource = tcb_resources, - .num_resources = ARRAY_SIZE(tcb_resources), -}; - -static void __init at91_add_device_tc(void) -{ - platform_device_register(&at91sam9rl_tcb_device); -} -#else -static void __init at91_add_device_tc(void) { } -#endif - - -/* -------------------------------------------------------------------- - * ADC and Touchscreen - * -------------------------------------------------------------------- */ - -#if IS_ENABLED(CONFIG_AT91_ADC) -static struct at91_adc_data adc_data; - -static struct resource adc_resources[] = { - [0] = { - .start = AT91SAM9RL_BASE_TSC, - .end = AT91SAM9RL_BASE_TSC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC, - .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device at91_adc_device = { - .name = "at91sam9rl-adc", - .id = -1, - .dev = { - .platform_data = &adc_data, - }, - .resource = adc_resources, - .num_resources = ARRAY_SIZE(adc_resources), -}; - -static struct at91_adc_trigger at91_adc_triggers[] = { - [0] = { - .name = "external-rising", - .value = 1, - .is_external = true, - }, - [1] = { - .name = "external-falling", - .value = 2, - .is_external = true, - }, - [2] = { - .name = "external-any", - .value = 3, - .is_external = true, - }, - [3] = { - .name = "continuous", - .value = 6, - .is_external = false, - }, -}; - -void __init at91_add_device_adc(struct at91_adc_data *data) -{ - if (!data) - return; - - if (test_bit(0, &data->channels_used)) - at91_set_A_periph(AT91_PIN_PA17, 0); - if (test_bit(1, &data->channels_used)) - at91_set_A_periph(AT91_PIN_PA18, 0); - if (test_bit(2, &data->channels_used)) - at91_set_A_periph(AT91_PIN_PA19, 0); - if (test_bit(3, &data->channels_used)) - at91_set_A_periph(AT91_PIN_PA20, 0); - if (test_bit(4, &data->channels_used)) - at91_set_A_periph(AT91_PIN_PD6, 0); - if (test_bit(5, &data->channels_used)) - at91_set_A_periph(AT91_PIN_PD7, 0); - - if (data->use_external_triggers) - at91_set_A_periph(AT91_PIN_PB15, 0); - - data->startup_time = 40; - data->trigger_number = 4; - data->trigger_list = at91_adc_triggers; - - adc_data = *data; - platform_device_register(&at91_adc_device); -} -#else -void __init at91_add_device_adc(struct at91_adc_data *data) {} -#endif - -/* -------------------------------------------------------------------- - * RTC - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE) -static struct platform_device at91sam9rl_rtc_device = { - .name = "at91_rtc", - .id = -1, - .num_resources = 0, -}; - -static void __init at91_add_device_rtc(void) -{ - platform_device_register(&at91sam9rl_rtc_device); -} -#else -static void __init at91_add_device_rtc(void) {} -#endif - - -/* -------------------------------------------------------------------- - * RTT - * -------------------------------------------------------------------- */ - -static struct resource rtt_resources[] = { - { - .start = AT91SAM9RL_BASE_RTT, - .end = AT91SAM9RL_BASE_RTT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device at91sam9rl_rtt_device = { - .name = "at91_rtt", - .id = 0, - .resource = rtt_resources, -}; - -#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) -static void __init at91_add_device_rtt_rtc(void) -{ - at91sam9rl_rtt_device.name = "rtc-at91sam9"; - /* - * The second resource is needed: - * GPBR will serve as the storage for RTC time offset - */ - at91sam9rl_rtt_device.num_resources = 3; - rtt_resources[1].start = AT91SAM9RL_BASE_GPBR + - 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; - rtt_resources[1].end = rtt_resources[1].start + 3; - rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; - rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; -} -#else -static void __init at91_add_device_rtt_rtc(void) -{ - /* Only one resource is needed: RTT not used as RTC */ - at91sam9rl_rtt_device.num_resources = 1; -} -#endif - -static void __init at91_add_device_rtt(void) -{ - at91_add_device_rtt_rtc(); - platform_device_register(&at91sam9rl_rtt_device); -} - - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) -static struct resource wdt_resources[] = { - { - .start = AT91SAM9RL_BASE_WDT, - .end = AT91SAM9RL_BASE_WDT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91sam9rl_wdt_device = { - .name = "at91_wdt", - .id = -1, - .resource = wdt_resources, - .num_resources = ARRAY_SIZE(wdt_resources), -}; - -static void __init at91_add_device_watchdog(void) -{ - platform_device_register(&at91sam9rl_wdt_device); -} -#else -static void __init at91_add_device_watchdog(void) {} -#endif - - -/* -------------------------------------------------------------------- - * PWM - * --------------------------------------------------------------------*/ - -#if IS_ENABLED(CONFIG_PWM_ATMEL) -static struct resource pwm_resources[] = { - [0] = { - .start = AT91SAM9RL_BASE_PWMC, - .end = AT91SAM9RL_BASE_PWMC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_PWMC, - .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_PWMC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9rl_pwm0_device = { - .name = "at91sam9rl-pwm", - .id = -1, - .resource = pwm_resources, - .num_resources = ARRAY_SIZE(pwm_resources), -}; - -void __init at91_add_device_pwm(u32 mask) -{ - if (mask & (1 << AT91_PWM0)) - at91_set_B_periph(AT91_PIN_PB8, 1); /* enable PWM0 */ - - if (mask & (1 << AT91_PWM1)) - at91_set_B_periph(AT91_PIN_PB9, 1); /* enable PWM1 */ - - if (mask & (1 << AT91_PWM2)) - at91_set_B_periph(AT91_PIN_PD5, 1); /* enable PWM2 */ - - if (mask & (1 << AT91_PWM3)) - at91_set_B_periph(AT91_PIN_PD8, 1); /* enable PWM3 */ - - platform_device_register(&at91sam9rl_pwm0_device); -} -#else -void __init at91_add_device_pwm(u32 mask) {} -#endif - - -/* -------------------------------------------------------------------- - * SSC -- Synchronous Serial Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) -static u64 ssc0_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc0_resources[] = { - [0] = { - .start = AT91SAM9RL_BASE_SSC0, - .end = AT91SAM9RL_BASE_SSC0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC0, - .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9rl_ssc0_device = { - .name = "at91rm9200_ssc", - .id = 0, - .dev = { - .dma_mask = &ssc0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc0_resources, - .num_resources = ARRAY_SIZE(ssc0_resources), -}; - -static inline void configure_ssc0_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PC0, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PC1, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PA15, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PA16, 1); - if (pins & ATMEL_SSC_RK) - at91_set_B_periph(AT91_PIN_PA10, 1); - if (pins & ATMEL_SSC_RF) - at91_set_B_periph(AT91_PIN_PA22, 1); -} - -static u64 ssc1_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc1_resources[] = { - [0] = { - .start = AT91SAM9RL_BASE_SSC1, - .end = AT91SAM9RL_BASE_SSC1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC1, - .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9rl_ssc1_device = { - .name = "at91rm9200_ssc", - .id = 1, - .dev = { - .dma_mask = &ssc1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc1_resources, - .num_resources = ARRAY_SIZE(ssc1_resources), -}; - -static inline void configure_ssc1_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_B_periph(AT91_PIN_PA29, 1); - if (pins & ATMEL_SSC_TK) - at91_set_B_periph(AT91_PIN_PA30, 1); - if (pins & ATMEL_SSC_TD) - at91_set_B_periph(AT91_PIN_PA13, 1); - if (pins & ATMEL_SSC_RD) - at91_set_B_periph(AT91_PIN_PA14, 1); - if (pins & ATMEL_SSC_RK) - at91_set_B_periph(AT91_PIN_PA9, 1); - if (pins & ATMEL_SSC_RF) - at91_set_B_periph(AT91_PIN_PA8, 1); -} - -/* - * SSC controllers are accessed through library code, instead of any - * kind of all-singing/all-dancing driver. For example one could be - * used by a particular I2S audio codec's driver, while another one - * on the same system might be used by a custom data capture driver. - */ -void __init at91_add_device_ssc(unsigned id, unsigned pins) -{ - struct platform_device *pdev; - - /* - * NOTE: caller is responsible for passing information matching - * "pins" to whatever will be using each particular controller. - */ - switch (id) { - case AT91SAM9RL_ID_SSC0: - pdev = &at91sam9rl_ssc0_device; - configure_ssc0_pins(pins); - break; - case AT91SAM9RL_ID_SSC1: - pdev = &at91sam9rl_ssc1_device; - configure_ssc1_pins(pins); - break; - default: - return; - } - - platform_device_register(pdev); -} - -#else -void __init at91_add_device_ssc(unsigned id, unsigned pins) {} -#endif - - -/* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SERIAL_ATMEL) -static struct resource dbgu_resources[] = { - [0] = { - .start = AT91SAM9RL_BASE_DBGU, - .end = AT91SAM9RL_BASE_DBGU + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91_ID_SYS, - .end = NR_IRQS_LEGACY + AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data dbgu_data = { - .use_dma_tx = 0, - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ -}; - -static u64 dbgu_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9rl_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { - .dma_mask = &dbgu_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -}; - -static inline void configure_dbgu_pins(void) -{ - at91_set_A_periph(AT91_PIN_PA21, 0); /* DRXD */ - at91_set_A_periph(AT91_PIN_PA22, 1); /* DTXD */ -} - -static struct resource uart0_resources[] = { - [0] = { - .start = AT91SAM9RL_BASE_US0, - .end = AT91SAM9RL_BASE_US0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US0, - .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart0_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart0_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9rl_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { - .dma_mask = &uart0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), -}; - -static inline void configure_usart0_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */ - if (pins & ATMEL_UART_DSR) - at91_set_A_periph(AT91_PIN_PD14, 0); /* DSR0 */ - if (pins & ATMEL_UART_DTR) - at91_set_A_periph(AT91_PIN_PD15, 0); /* DTR0 */ - if (pins & ATMEL_UART_DCD) - at91_set_A_periph(AT91_PIN_PD16, 0); /* DCD0 */ - if (pins & ATMEL_UART_RI) - at91_set_A_periph(AT91_PIN_PD17, 0); /* RI0 */ -} - -static struct resource uart1_resources[] = { - [0] = { - .start = AT91SAM9RL_BASE_US1, - .end = AT91SAM9RL_BASE_US1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US1, - .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart1_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart1_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9rl_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { - .dma_mask = &uart1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), -}; - -static inline void configure_usart1_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PA18, 0); /* RTS1 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PA19, 0); /* CTS1 */ -} - -static struct resource uart2_resources[] = { - [0] = { - .start = AT91SAM9RL_BASE_US2, - .end = AT91SAM9RL_BASE_US2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US2, - .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart2_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart2_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9rl_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { - .dma_mask = &uart2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), -}; - -static inline void configure_usart2_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PA29, 0); /* RTS2 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PA30, 0); /* CTS2 */ -} - -static struct resource uart3_resources[] = { - [0] = { - .start = AT91SAM9RL_BASE_US3, - .end = AT91SAM9RL_BASE_US3 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US3, - .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US3, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart3_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart3_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9rl_uart3_device = { - .name = "atmel_usart", - .id = 4, - .dev = { - .dma_mask = &uart3_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart3_data, - }, - .resource = uart3_resources, - .num_resources = ARRAY_SIZE(uart3_resources), -}; - -static inline void configure_usart3_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */ - at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PD4, 0); /* RTS3 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */ -} - -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ - -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -{ - struct platform_device *pdev; - struct atmel_uart_data *pdata; - - switch (id) { - case 0: /* DBGU */ - pdev = &at91sam9rl_dbgu_device; - configure_dbgu_pins(); - break; - case AT91SAM9RL_ID_US0: - pdev = &at91sam9rl_uart0_device; - configure_usart0_pins(pins); - break; - case AT91SAM9RL_ID_US1: - pdev = &at91sam9rl_uart1_device; - configure_usart1_pins(pins); - break; - case AT91SAM9RL_ID_US2: - pdev = &at91sam9rl_uart2_device; - configure_usart2_pins(pins); - break; - case AT91SAM9RL_ID_US3: - pdev = &at91sam9rl_uart3_device; - configure_usart3_pins(pins); - break; - default: - return; - } - pdata = pdev->dev.platform_data; - pdata->num = portnr; /* update to mapped ID */ - - if (portnr < ATMEL_MAX_UART) - at91_uarts[portnr] = pdev; -} - -void __init at91_add_device_serial(void) -{ - int i; - - for (i = 0; i < ATMEL_MAX_UART; i++) { - if (at91_uarts[i]) - platform_device_register(at91_uarts[i]); - } -} -#else -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_add_device_serial(void) {} -#endif - - -/* -------------------------------------------------------------------- */ - -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init at91_add_standard_devices(void) -{ - at91_add_device_hdmac(); - at91_add_device_rtc(); - at91_add_device_rtt(); - at91_add_device_watchdog(); - at91_add_device_tc(); - return 0; -} - -arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 028268ff372..f0d5a69a723 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -6,317 +6,11 @@ * Licensed under GPLv2 or later. */ -#include <linux/module.h> -#include <linux/dma-mapping.h> -#include <linux/clk/at91_pmc.h> +#include <asm/system_misc.h> +#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/at91sam9x5.h> -#include <mach/cpu.h> - -#include "board.h" #include "soc.h" #include "generic.h" -#include "sam9_smc.h" - -#if defined(CONFIG_OLD_CLK_AT91) -#include "clock.h" -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk pioAB_clk = { - .name = "pioAB_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_PIOAB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioCD_clk = { - .name = "pioCD_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_PIOCD, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk smd_clk = { - .name = "smd_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_SMD, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_USART0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_USART1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_USART2, - .type = CLK_TYPE_PERIPHERAL, -}; -/* USART3 clock - Only for sam9g25/sam9x25 */ -static struct clk usart3_clk = { - .name = "usart3_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_USART3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi0_clk = { - .name = "twi0_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_TWI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi1_clk = { - .name = "twi1_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_TWI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi2_clk = { - .name = "twi2_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_TWI2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc0_clk = { - .name = "mci0_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_MCI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk uart0_clk = { - .name = "uart0_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_UART0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk uart1_clk = { - .name = "uart1_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_UART1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tcb0_clk = { - .name = "tcb0_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_TCB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pwm_clk = { - .name = "pwm_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_PWM, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk adc_clk = { - .name = "adc_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_ADC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk adc_op_clk = { - .name = "adc_op_clk", - .type = CLK_TYPE_PERIPHERAL, - .rate_hz = 5000000, -}; -static struct clk dma0_clk = { - .name = "dma0_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_DMA0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk dma1_clk = { - .name = "dma1_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_DMA1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk uhphs_clk = { - .name = "uhphs", - .pmc_mask = 1 << AT91SAM9X5_ID_UHPHS, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udphs_clk = { - .name = "udphs_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_UDPHS, - .type = CLK_TYPE_PERIPHERAL, -}; -/* emac0 clock - Only for sam9g25/sam9x25/sam9g35/sam9x35 */ -static struct clk macb0_clk = { - .name = "pclk", - .pmc_mask = 1 << AT91SAM9X5_ID_EMAC0, - .type = CLK_TYPE_PERIPHERAL, -}; -/* lcd clock - Only for sam9g15/sam9g35/sam9x35 */ -static struct clk lcdc_clk = { - .name = "lcdc_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_LCDC, - .type = CLK_TYPE_PERIPHERAL, -}; -/* isi clock - Only for sam9g25 */ -static struct clk isi_clk = { - .name = "isi_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_ISI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc1_clk = { - .name = "mci1_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_MCI1, - .type = CLK_TYPE_PERIPHERAL, -}; -/* emac1 clock - Only for sam9x25 */ -static struct clk macb1_clk = { - .name = "pclk", - .pmc_mask = 1 << AT91SAM9X5_ID_EMAC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc_clk = { - .name = "ssc_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_SSC, - .type = CLK_TYPE_PERIPHERAL, -}; -/* can0 clock - Only for sam9x35 */ -static struct clk can0_clk = { - .name = "can0_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_CAN0, - .type = CLK_TYPE_PERIPHERAL, -}; -/* can1 clock - Only for sam9x35 */ -static struct clk can1_clk = { - .name = "can1_clk", - .pmc_mask = 1 << AT91SAM9X5_ID_CAN1, - .type = CLK_TYPE_PERIPHERAL, -}; - -static struct clk *periph_clocks[] __initdata = { - &pioAB_clk, - &pioCD_clk, - &smd_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &twi0_clk, - &twi1_clk, - &twi2_clk, - &mmc0_clk, - &spi0_clk, - &spi1_clk, - &uart0_clk, - &uart1_clk, - &tcb0_clk, - &pwm_clk, - &adc_clk, - &adc_op_clk, - &dma0_clk, - &dma1_clk, - &uhphs_clk, - &udphs_clk, - &mmc1_clk, - &ssc_clk, - // irq0 -}; - -static struct clk_lookup periph_clocks_lookups[] = { - /* lookup table for DT entries */ - CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), - CLKDEV_CON_DEV_ID("usart", "f801c000.serial", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk), - CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), - CLKDEV_CON_DEV_ID("usart", "f8040000.serial", &uart0_clk), - CLKDEV_CON_DEV_ID("usart", "f8044000.serial", &uart1_clk), - CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk), - CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "f000c000.mmc", &mmc1_clk), - CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk), - CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk), - CLKDEV_CON_DEV_ID("pclk", "f0010000.ssc", &ssc_clk), - CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), - CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), - CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk), - CLKDEV_CON_DEV_ID("spi_clk", "f0000000.spi", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi1_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk), - CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCD_clk), - /* additional fake clock for macb_hclk */ - CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk), - CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk), - CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk), - CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk), - CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk), - CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk), - CLKDEV_CON_DEV_ID(NULL, "f8034000.pwm", &pwm_clk), -}; - -/* - * The two programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; - -static void __init at91sam9x5_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clkdev_add_table(periph_clocks_lookups, - ARRAY_SIZE(periph_clocks_lookups)); - - if (cpu_is_at91sam9g25() - || cpu_is_at91sam9x25()) - clk_register(&usart3_clk); - - if (cpu_is_at91sam9g25() - || cpu_is_at91sam9x25() - || cpu_is_at91sam9g35() - || cpu_is_at91sam9x35()) - clk_register(&macb0_clk); - - if (cpu_is_at91sam9g15() - || cpu_is_at91sam9g35() - || cpu_is_at91sam9x35()) - clk_register(&lcdc_clk); - - if (cpu_is_at91sam9g25()) - clk_register(&isi_clk); - - if (cpu_is_at91sam9x25()) - clk_register(&macb1_clk); - - if (cpu_is_at91sam9x25() - || cpu_is_at91sam9x35()) { - clk_register(&can0_clk); - clk_register(&can1_clk); - } - - clk_register(&pck0); - clk_register(&pck1); -} -#else -#define at91sam9x5_register_clocks NULL -#endif /* -------------------------------------------------------------------- * AT91SAM9x5 processor initialization @@ -338,6 +32,5 @@ static void __init at91sam9x5_initialize(void) AT91_SOC_START(at91sam9x5) .map_io = at91sam9x5_map_io, - .register_clocks = at91sam9x5_register_clocks, .init = at91sam9x5_initialize, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c deleted file mode 100644 index 7523f1cdfe1..00000000000 --- a/arch/arm/mach-at91/at91x40.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * arch/arm/mach-at91/at91x40.c - * - * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com> - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <asm/proc-fns.h> -#include <asm/system_misc.h> -#include <asm/mach/arch.h> -#include <mach/at91x40.h> -#include <mach/at91_st.h> -#include <mach/hardware.h> - -#include "at91_aic.h" -#include "generic.h" - -/* - * Export the clock functions for the AT91X40. Some external code common - * to all AT91 family parts relys on this, like the gpio and serial support. - */ -int clk_enable(struct clk *clk) -{ - return 0; -} - -void clk_disable(struct clk *clk) -{ -} - -unsigned long clk_get_rate(struct clk *clk) -{ - return AT91X40_MASTER_CLOCK; -} - -static void at91x40_idle(void) -{ - /* - * Disable the processor clock. The processor will be automatically - * re-enabled by an interrupt or by a reset. - */ - __raw_writel(AT91_PS_CR_CPU, AT91_IO_P2V(AT91_PS_CR)); - cpu_do_idle(); -} - -void __init at91x40_initialize(unsigned long main_clock) -{ - arm_pm_idle = at91x40_idle; -} - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91x40_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller (FIQ) */ - 0, /* System Peripherals */ - 0, /* USART 0 */ - 0, /* USART 1 */ - 2, /* Timer Counter 0 */ - 2, /* Timer Counter 1 */ - 2, /* Timer Counter 2 */ - 0, /* Watchdog timer */ - 0, /* Parallel IO Controller A */ - 0, /* Reserved */ - 0, /* Reserved */ - 0, /* Reserved */ - 0, /* Reserved */ - 0, /* Reserved */ - 0, /* Reserved */ - 0, /* Reserved */ - 0, /* External IRQ0 */ - 0, /* External IRQ1 */ - 0, /* External IRQ2 */ -}; - -void __init at91x40_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - u32 extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1) - | (1 << AT91X40_ID_IRQ2); - if (!priority) - priority = at91x40_default_irq_priority; - - at91_aic_init(priority, extern_irq); -} diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c deleted file mode 100644 index 07d0bf2ac2d..00000000000 --- a/arch/arm/mach-at91/at91x40_time.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * arch/arm/mach-at91/at91x40_time.c - * - * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/time.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <mach/at91x40.h> -#include <asm/mach/time.h> - -#include "at91_tc.h" - -#define at91_tc_read(field) \ - __raw_readl(AT91_IO_P2V(AT91_TC) + field) - -#define at91_tc_write(field, value) \ - __raw_writel(value, AT91_IO_P2V(AT91_TC) + field) - -/* - * 3 counter/timer units present. - */ -#define AT91_TC_CLK0BASE 0 -#define AT91_TC_CLK1BASE 0x40 -#define AT91_TC_CLK2BASE 0x80 - -static u32 at91x40_gettimeoffset(void) -{ - return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / - (AT91X40_MASTER_CLOCK / 128)) * 1000; -} - -static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id) -{ - at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_SR); - timer_tick(); - return IRQ_HANDLED; -} - -static struct irqaction at91x40_timer_irq = { - .name = "at91_tick", - .flags = IRQF_TIMER, - .handler = at91x40_timer_interrupt -}; - -void __init at91x40_timer_init(void) -{ - unsigned int v; - - arch_gettimeoffset = at91x40_gettimeoffset; - - at91_tc_write(AT91_TC_BCR, 0); - v = at91_tc_read(AT91_TC_BMR); - v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE; - at91_tc_write(AT91_TC_BMR, v); - - at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, AT91_TC_CLKDIS); - at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CMR, (AT91_TC_TIMER_CLOCK4 | AT91_TC_CPCTRG)); - at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IDR, 0xffffffff); - at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_RC, (AT91X40_MASTER_CLOCK / 128) / HZ - 1); - at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IER, (1<<4)); - - setup_irq(AT91X40_ID_TC1, &at91x40_timer_irq); - - at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN)); -} diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c deleted file mode 100644 index 3f6dbcc3402..00000000000 --- a/arch/arm/mach-at91/board-1arm.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-1arm.c - * - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/cpu.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" -#include "gpio.h" - -static void __init onearm_init_early(void) -{ - /* Set cpu type: PQFP */ - at91rm9200_set_type(ARCH_REVISON_9200_PQFP); - - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -static struct macb_platform_data __initdata onearm_eth_data = { - .phy_irq_pin = AT91_PIN_PC4, - .is_rmii = 1, -}; - -static struct at91_usbh_data __initdata onearm_usbh_data = { - .ports = 1, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -static struct at91_udc_data __initdata onearm_udc_data = { - .vbus_pin = AT91_PIN_PC2, - .pullup_pin = AT91_PIN_PC3, -}; - -static void __init onearm_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - at91_add_device_serial(); - /* Ethernet */ - at91_add_device_eth(&onearm_eth_data); - /* USB Host */ - at91_add_device_usbh(&onearm_usbh_data); - /* USB Device */ - at91_add_device_udc(&onearm_udc_data); -} - -MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") - /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .init_time = at91rm9200_timer_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = onearm_init_early, - .init_irq = at91_init_irq_default, - .init_machine = onearm_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c deleted file mode 100644 index e76e35ce81e..00000000000 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ /dev/null @@ -1,223 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-afeb-9260v1.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2006 Atmel - * Copyright (C) 2008 Sergey Lapin - * - * A custom board designed as open hardware; PCBs and various information - * is available at http://groups.google.com/group/arm9fpga-evolution-board/ - * Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/clk.h> -#include <linux/dma-mapping.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" -#include "gpio.h" - - -static void __init afeb9260_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata afeb9260_usbh_data = { - .ports = 1, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata afeb9260_udc_data = { - .vbus_pin = AT91_PIN_PC5, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - - - -/* - * SPI devices. - */ -static struct spi_board_info afeb9260_spi_devices[] = { - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 1, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata afeb9260_macb_data = { - .phy_irq_pin = AT91_PIN_PA9, - .is_rmii = 0, -}; - - -/* - * NAND flash - */ -static struct mtd_partition __initdata afeb9260_nand_partition[] = { - { - .name = "bootloader", - .offset = 0, - .size = (640 * SZ_1K), - }, - { - .name = "kernel", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_2M, - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata afeb9260_nand_data = { - .ale = 21, - .cle = 22, - .rdy_pin = AT91_PIN_PC13, - .enable_pin = AT91_PIN_PC14, - .bus_width_16 = 0, - .ecc_mode = NAND_ECC_SOFT, - .parts = afeb9260_nand_partition, - .num_parts = ARRAY_SIZE(afeb9260_nand_partition), - .det_pin = -EINVAL, -}; - - -/* - * MCI (SD/MMC) - */ -static struct mci_platform_data __initdata afeb9260_mci0_data = { - .slot[1] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PC9, - .wp_pin = AT91_PIN_PC4, - }, -}; - - - -static struct i2c_board_info __initdata afeb9260_i2c_devices[] = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, { - I2C_BOARD_INFO("fm3130", 0x68), - }, { - I2C_BOARD_INFO("24c64", 0x50), - }, -}; - -/* - * IDE (CF True IDE mode) - */ -static struct at91_cf_data afeb9260_cf_data = { - .chipselect = 4, - .irq_pin = AT91_PIN_PA6, - .det_pin = -EINVAL, - .vcc_pin = -EINVAL, - .rst_pin = AT91_PIN_PA7, - .flags = AT91_CF_TRUE_IDE, -}; - -static void __init afeb9260_board_init(void) -{ - at91_register_devices(); - - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, - ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR - | ATMEL_UART_DCD | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, - ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&afeb9260_usbh_data); - /* USB Device */ - at91_add_device_udc(&afeb9260_udc_data); - /* SPI */ - at91_add_device_spi(afeb9260_spi_devices, - ARRAY_SIZE(afeb9260_spi_devices)); - /* NAND */ - at91_add_device_nand(&afeb9260_nand_data); - /* Ethernet */ - at91_add_device_eth(&afeb9260_macb_data); - - /* Standard function's pin assignments are not - * appropriate for us and generic code provide - * no API to configure these pins any other way */ - at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */ - at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */ - /* MMC */ - at91_add_device_mci(0, &afeb9260_mci0_data); - /* I2C */ - at91_add_device_i2c(afeb9260_i2c_devices, - ARRAY_SIZE(afeb9260_i2c_devices)); - /* Audio */ - at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); - /* IDE */ - at91_add_device_cf(&afeb9260_cf_data); -} - -MACHINE_START(AFEB9260, "Custom afeb9260 board") - /* Maintainer: Sergey Lapin <slapin@ossfans.org> */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = afeb9260_init_early, - .init_irq = at91_init_irq_default, - .init_machine = afeb9260_board_init, -MACHINE_END - diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c deleted file mode 100644 index ae827dd2d0d..00000000000 --- a/arch/arm/mach-at91/board-cam60.c +++ /dev/null @@ -1,199 +0,0 @@ -/* - * KwikByte CAM60 (KB9260) - * - * based on board-sam9260ek.c - * Copyright (C) 2005 SAN People - * Copyright (C) 2006 Atmel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/at91sam9_smc.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - - -static void __init cam60_init_early(void) -{ - /* Initialize processor: 10 MHz crystal */ - at91_initialize(10000000); -} - -/* - * USB Host - */ -static struct at91_usbh_data __initdata cam60_usbh_data = { - .ports = 1, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - - -/* - * SPI devices. - */ -#if defined(CONFIG_MTD_DATAFLASH) -static struct mtd_partition cam60_spi_partitions[] = { - { - .name = "BOOT1", - .offset = 0, - .size = 4 * 1056, - }, - { - .name = "BOOT2", - .offset = MTDPART_OFS_NXTBLK, - .size = 256 * 1056, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_NXTBLK, - .size = 2222 * 1056, - }, - { - .name = "file system", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct flash_platform_data cam60_spi_flash_platform_data = { - .name = "spi_flash", - .parts = cam60_spi_partitions, - .nr_parts = ARRAY_SIZE(cam60_spi_partitions) -}; -#endif - -static struct spi_board_info cam60_spi_devices[] __initdata = { -#if defined(CONFIG_MTD_DATAFLASH) - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - .platform_data = &cam60_spi_flash_platform_data - }, -#endif -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data cam60_macb_data __initdata = { - .phy_irq_pin = AT91_PIN_PB5, - .is_rmii = 0, -}; - - -/* - * NAND Flash - */ -static struct mtd_partition __initdata cam60_nand_partition[] = { - { - .name = "nand_fs", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata cam60_nand_data = { - .ale = 21, - .cle = 22, - .det_pin = -EINVAL, - .rdy_pin = AT91_PIN_PA9, - .enable_pin = AT91_PIN_PA7, - .ecc_mode = NAND_ECC_SOFT, - .parts = cam60_nand_partition, - .num_parts = ARRAY_SIZE(cam60_nand_partition), -}; - -static struct sam9_smc_config __initdata cam60_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 2, -}; - -static void __init cam60_add_device_nand(void) -{ - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &cam60_nand_smc_config); - - at91_add_device_nand(&cam60_nand_data); -} - - -static void __init cam60_board_init(void) -{ - at91_register_devices(); - - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - at91_add_device_serial(); - /* SPI */ - at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices)); - /* Ethernet */ - at91_add_device_eth(&cam60_macb_data); - /* USB Host */ - /* enable USB power supply circuit */ - at91_set_gpio_output(AT91_PIN_PB18, 1); - at91_add_device_usbh(&cam60_usbh_data); - /* NAND */ - cam60_add_device_nand(); -} - -MACHINE_START(CAM60, "KwikByte CAM60") - /* Maintainer: KwikByte */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = cam60_init_early, - .init_irq = at91_init_irq_default, - .init_machine = cam60_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c deleted file mode 100644 index 47313d3ee03..00000000000 --- a/arch/arm/mach-at91/board-carmeva.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-carmeva.c - * - * Copyright (c) 2005 Peer Georgi - * Conitec Datasystems - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" -#include "gpio.h" - - -static void __init carmeva_init_early(void) -{ - /* Initialize processor: 20.000 MHz crystal */ - at91_initialize(20000000); -} - -static struct macb_platform_data __initdata carmeva_eth_data = { - .phy_irq_pin = AT91_PIN_PC4, - .is_rmii = 1, -}; - -static struct at91_usbh_data __initdata carmeva_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -static struct at91_udc_data __initdata carmeva_udc_data = { - .vbus_pin = AT91_PIN_PD12, - .pullup_pin = AT91_PIN_PD9, -}; - -/* FIXME: user dependent */ -// static struct at91_cf_data __initdata carmeva_cf_data = { -// .det_pin = AT91_PIN_PB0, -// .rst_pin = AT91_PIN_PC5, - // .irq_pin = -EINVAL, - // .vcc_pin = -EINVAL, -// }; - -static struct mci_platform_data __initdata carmeva_mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PB10, - .wp_pin = AT91_PIN_PC14, - }, -}; - -static struct spi_board_info carmeva_spi_devices[] = { - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 10 * 1000 * 1000, - }, - { /* User accessible spi - cs1 (250KHz) */ - .modalias = "spi-cs1", - .chip_select = 1, - .max_speed_hz = 250 * 1000, - }, - { /* User accessible spi - cs2 (1MHz) */ - .modalias = "spi-cs2", - .chip_select = 2, - .max_speed_hz = 1 * 1000 * 1000, - }, - { /* User accessible spi - cs3 (10MHz) */ - .modalias = "spi-cs3", - .chip_select = 3, - .max_speed_hz = 10 * 1000 * 1000, - }, -}; - -static struct gpio_led carmeva_leds[] = { - { /* "user led 1", LED9 */ - .name = "led9", - .gpio = AT91_PIN_PA21, - .active_low = 1, - .default_trigger = "heartbeat", - }, - { /* "user led 2", LED10 */ - .name = "led10", - .gpio = AT91_PIN_PA25, - .active_low = 1, - }, - { /* "user led 3", LED11 */ - .name = "led11", - .gpio = AT91_PIN_PA26, - .active_low = 1, - }, - { /* "user led 4", LED12 */ - .name = "led12", - .gpio = AT91_PIN_PA18, - .active_low = 1, - } -}; - -static void __init carmeva_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - at91_add_device_serial(); - /* Ethernet */ - at91_add_device_eth(&carmeva_eth_data); - /* USB Host */ - at91_add_device_usbh(&carmeva_usbh_data); - /* USB Device */ - at91_add_device_udc(&carmeva_udc_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* SPI */ - at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices)); - /* Compact Flash */ -// at91_add_device_cf(&carmeva_cf_data); - /* MMC */ - at91_add_device_mci(0, &carmeva_mci0_data); - /* LEDs */ - at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds)); -} - -MACHINE_START(CARMEVA, "Carmeva") - /* Maintainer: Conitec Datasystems */ - .init_time = at91rm9200_timer_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = carmeva_init_early, - .init_irq = at91_init_irq_default, - .init_machine = carmeva_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c deleted file mode 100644 index 731c8318f4f..00000000000 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ /dev/null @@ -1,386 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-cpu9krea.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2006 Atmel - * Copyright (C) 2009 Eric Benard - eric@eukrea.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/mtd/physmap.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/at91sam9_smc.h> -#include <mach/at91sam9260_matrix.h> -#include <mach/at91_matrix.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - -static void __init cpu9krea_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata cpu9krea_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata cpu9krea_udc_data = { - .vbus_pin = AT91_PIN_PC8, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata cpu9krea_macb_data = { - .phy_irq_pin = -EINVAL, - .is_rmii = 1, -}; - -/* - * NAND flash - */ -static struct atmel_nand_data __initdata cpu9krea_nand_data = { - .ale = 21, - .cle = 22, - .rdy_pin = AT91_PIN_PC13, - .enable_pin = AT91_PIN_PC14, - .bus_width_16 = 0, - .det_pin = -EINVAL, - .ecc_mode = NAND_ECC_SOFT, -}; - -#ifdef CONFIG_MACH_CPU9260 -static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE - | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 2, -}; -#else -static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 2, - .ncs_write_setup = 0, - .nwe_setup = 2, - - .ncs_read_pulse = 4, - .nrd_pulse = 4, - .ncs_write_pulse = 4, - .nwe_pulse = 4, - - .read_cycle = 7, - .write_cycle = 7, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE - | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 3, -}; -#endif - -static void __init cpu9krea_add_device_nand(void) -{ - sam9_smc_configure(0, 3, &cpu9krea_nand_smc_config); - at91_add_device_nand(&cpu9krea_nand_data); -} - -/* - * NOR flash - */ -static struct physmap_flash_data cpuat9260_nor_data = { - .width = 2, -}; - -#define NOR_BASE AT91_CHIPSELECT_0 -#define NOR_SIZE SZ_64M - -static struct resource nor_flash_resources[] = { - { - .start = NOR_BASE, - .end = NOR_BASE + NOR_SIZE - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device cpu9krea_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &cpuat9260_nor_data, - }, - .resource = nor_flash_resources, - .num_resources = ARRAY_SIZE(nor_flash_resources), -}; - -#ifdef CONFIG_MACH_CPU9260 -static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 10, - .nrd_pulse = 10, - .ncs_write_pulse = 6, - .nwe_pulse = 6, - - .read_cycle = 12, - .write_cycle = 8, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE - | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE - | AT91_SMC_DBW_16, - .tdf_cycles = 2, -}; -#else -static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 13, - .nrd_pulse = 13, - .ncs_write_pulse = 8, - .nwe_pulse = 8, - - .read_cycle = 15, - .write_cycle = 10, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE - | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE - | AT91_SMC_DBW_16, - .tdf_cycles = 2, -}; -#endif - -static __init void cpu9krea_add_device_nor(void) -{ - unsigned long csa; - - csa = at91_matrix_read(AT91_MATRIX_EBICSA); - at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V); - - /* configure chip-select 0 (NOR) */ - sam9_smc_configure(0, 0, &cpu9krea_nor_smc_config); - - platform_device_register(&cpu9krea_nor_flash); -} - -/* - * LEDs - */ -static struct gpio_led cpu9krea_leds[] = { - { /* LED1 */ - .name = "LED1", - .gpio = AT91_PIN_PC11, - .active_low = 1, - .default_trigger = "timer", - }, - { /* LED2 */ - .name = "LED2", - .gpio = AT91_PIN_PC12, - .active_low = 1, - .default_trigger = "heartbeat", - }, - { /* LED3 */ - .name = "LED3", - .gpio = AT91_PIN_PC7, - .active_low = 1, - .default_trigger = "none", - }, - { /* LED4 */ - .name = "LED4", - .gpio = AT91_PIN_PC9, - .active_low = 1, - .default_trigger = "none", - } -}; - -static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = { - { - I2C_BOARD_INFO("ds1339", 0x68), - }, -}; - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button cpu9krea_buttons[] = { - { - .gpio = AT91_PIN_PC3, - .code = BTN_0, - .desc = "BP1", - .active_low = 1, - .wakeup = 1, - }, - { - .gpio = AT91_PIN_PB20, - .code = BTN_1, - .desc = "BP2", - .active_low = 1, - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data cpu9krea_button_data = { - .buttons = cpu9krea_buttons, - .nbuttons = ARRAY_SIZE(cpu9krea_buttons), -}; - -static struct platform_device cpu9krea_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &cpu9krea_button_data, - } -}; - -static void __init cpu9krea_add_device_buttons(void) -{ - at91_set_gpio_input(AT91_PIN_PC3, 1); /* BP1 */ - at91_set_deglitch(AT91_PIN_PC3, 1); - at91_set_gpio_input(AT91_PIN_PB20, 1); /* BP2 */ - at91_set_deglitch(AT91_PIN_PB20, 1); - - platform_device_register(&cpu9krea_button_device); -} -#else -static void __init cpu9krea_add_device_buttons(void) -{ -} -#endif - -/* - * MCI (SD/MMC) - */ -static struct mci_platform_data __initdata cpu9krea_mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PA29, - .wp_pin = -EINVAL, - }, -}; - -static void __init cpu9krea_board_init(void) -{ - at91_register_devices(); - - /* NOR */ - cpu9krea_add_device_nor(); - /* Serial */ - /* DGBU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | - ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR | - ATMEL_UART_DCD | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | - ATMEL_UART_RTS); - - /* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | - ATMEL_UART_RTS); - - /* USART3 on ttyS4. (Rx, Tx) */ - at91_register_uart(AT91SAM9260_ID_US3, 4, 0); - - /* USART4 on ttyS5. (Rx, Tx) */ - at91_register_uart(AT91SAM9260_ID_US4, 5, 0); - - /* USART5 on ttyS6. (Rx, Tx) */ - at91_register_uart(AT91SAM9260_ID_US5, 6, 0); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&cpu9krea_usbh_data); - /* USB Device */ - at91_add_device_udc(&cpu9krea_udc_data); - /* NAND */ - cpu9krea_add_device_nand(); - /* Ethernet */ - at91_add_device_eth(&cpu9krea_macb_data); - /* MMC */ - at91_add_device_mci(0, &cpu9krea_mci0_data); - /* I2C */ - at91_add_device_i2c(cpu9krea_i2c_devices, - ARRAY_SIZE(cpu9krea_i2c_devices)); - /* LEDs */ - at91_gpio_leds(cpu9krea_leds, ARRAY_SIZE(cpu9krea_leds)); - /* Push Buttons */ - cpu9krea_add_device_buttons(); -} - -#ifdef CONFIG_MACH_CPU9260 -MACHINE_START(CPUAT9260, "Eukrea CPU9260") -#else -MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") -#endif - /* Maintainer: Eric Benard - EUKREA Electromatique */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = cpu9krea_init_early, - .init_irq = at91_init_irq_default, - .init_machine = cpu9krea_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c deleted file mode 100644 index c094350c931..00000000000 --- a/arch/arm/mach-at91/board-cpuat91.c +++ /dev/null @@ -1,189 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-cpuat91.c - * - * Copyright (C) 2009 Eric Benard - eric@eukrea.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/plat-ram.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/at91rm9200_mc.h> -#include <mach/at91_ramc.h> -#include <mach/cpu.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" -#include "gpio.h" - - -static struct gpio_led cpuat91_leds[] = { - { - .name = "led1", - .default_trigger = "heartbeat", - .active_low = 1, - .gpio = AT91_PIN_PC0, - }, -}; - -static void __init cpuat91_init_early(void) -{ - /* Set cpu type: PQFP */ - at91rm9200_set_type(ARCH_REVISON_9200_PQFP); - - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -static struct macb_platform_data __initdata cpuat91_eth_data = { - .phy_irq_pin = -EINVAL, - .is_rmii = 1, -}; - -static struct at91_usbh_data __initdata cpuat91_usbh_data = { - .ports = 1, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -static struct at91_udc_data __initdata cpuat91_udc_data = { - .vbus_pin = AT91_PIN_PC15, - .pullup_pin = AT91_PIN_PC14, -}; - -static struct mci_platform_data __initdata cpuat91_mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PC2, - .wp_pin = -EINVAL, - }, -}; - -static struct physmap_flash_data cpuat91_flash_data = { - .width = 2, -}; - -static struct resource cpuat91_flash_resource = { - .start = AT91_CHIPSELECT_0, - .end = AT91_CHIPSELECT_0 + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device cpuat91_norflash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &cpuat91_flash_data, - }, - .resource = &cpuat91_flash_resource, - .num_resources = 1, -}; - -#ifdef CONFIG_MTD_PLATRAM -struct platdata_mtd_ram at91_sram_pdata = { - .mapname = "SRAM", - .bankwidth = 2, -}; - -static struct resource at91_sram_resource[] = { - [0] = { - .start = AT91RM9200_SRAM_BASE, - .end = AT91RM9200_SRAM_BASE + AT91RM9200_SRAM_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device at91_sram = { - .name = "mtd-ram", - .id = 0, - .resource = at91_sram_resource, - .num_resources = ARRAY_SIZE(at91_sram_resource), - .dev = { - .platform_data = &at91_sram_pdata, - }, -}; -#endif /* MTD_PLATRAM */ - -static struct platform_device *platform_devices[] __initdata = { - &cpuat91_norflash, -#ifdef CONFIG_MTD_PLATRAM - &at91_sram, -#endif /* CONFIG_MTD_PLATRAM */ -}; - -static void __init cpuat91_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | - ATMEL_UART_RTS); - - /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | - ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR | - ATMEL_UART_DCD | ATMEL_UART_RI); - - /* USART2 on ttyS3 (Rx, Tx) */ - at91_register_uart(AT91RM9200_ID_US2, 3, 0); - - /* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS | - ATMEL_UART_RTS); - at91_add_device_serial(); - /* LEDs. */ - at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds)); - /* Ethernet */ - at91_add_device_eth(&cpuat91_eth_data); - /* USB Host */ - at91_add_device_usbh(&cpuat91_usbh_data); - /* USB Device */ - at91_add_device_udc(&cpuat91_udc_data); - /* MMC */ - at91_add_device_mci(0, &cpuat91_mci0_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* Platform devices */ - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); -} - -MACHINE_START(CPUAT91, "Eukrea") - /* Maintainer: Eric Benard - EUKREA Electromatique */ - .init_time = at91rm9200_timer_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = cpuat91_init_early, - .init_irq = at91_init_irq_default, - .init_machine = cpuat91_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c deleted file mode 100644 index 0e35a45cf8d..00000000000 --- a/arch/arm/mach-at91/board-csb337.c +++ /dev/null @@ -1,260 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-csb337.c - * - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/mtd/physmap.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" -#include "gpio.h" - -static void __init csb337_init_early(void) -{ - /* Initialize processor: 3.6864 MHz crystal */ - at91_initialize(3686400); -} - -static struct macb_platform_data __initdata csb337_eth_data = { - .phy_irq_pin = AT91_PIN_PC2, - .is_rmii = 0, - /* The CSB337 bootloader stores the MAC the wrong-way around */ - .rev_eth_addr = 1, -}; - -static struct at91_usbh_data __initdata csb337_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -static struct at91_udc_data __initdata csb337_udc_data = { - .pullup_pin = AT91_PIN_PA24, - .vbus_pin = -EINVAL, -}; - -static struct i2c_board_info __initdata csb337_i2c_devices[] = { - { - I2C_BOARD_INFO("ds1307", 0x68), - }, -}; - -static struct at91_cf_data __initdata csb337_cf_data = { - /* - * connector P4 on the CSB 337 mates to - * connector P8 on the CSB 300CF - */ - - /* CSB337 specific */ - .det_pin = AT91_PIN_PC3, - - /* CSB300CF specific */ - .irq_pin = AT91_PIN_PA19, - .vcc_pin = AT91_PIN_PD0, - .rst_pin = AT91_PIN_PD2, -}; - -static struct mci_platform_data __initdata csb337_mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PD5, - .wp_pin = AT91_PIN_PD6, - }, -}; - -static struct spi_board_info csb337_spi_devices[] = { - { /* CAN controller */ - .modalias = "sak82c900", - .chip_select = 0, - .max_speed_hz = 6 * 1000 * 1000, - }, -}; - -#define CSB_FLASH_BASE AT91_CHIPSELECT_0 -#define CSB_FLASH_SIZE SZ_8M - -static struct mtd_partition csb_flash_partitions[] = { - { - .name = "uMON flash", - .offset = 0, - .size = MTDPART_SIZ_FULL, - .mask_flags = MTD_WRITEABLE, /* read only */ - } -}; - -static struct physmap_flash_data csb_flash_data = { - .width = 2, - .parts = csb_flash_partitions, - .nr_parts = ARRAY_SIZE(csb_flash_partitions), -}; - -static struct resource csb_flash_resources[] = { - { - .start = CSB_FLASH_BASE, - .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device csb_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &csb_flash_data, - }, - .resource = csb_flash_resources, - .num_resources = ARRAY_SIZE(csb_flash_resources), -}; - -/* - * GPIO Buttons (on CSB300) - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button csb300_buttons[] = { - { - .gpio = AT91_PIN_PB29, - .code = BTN_0, - .desc = "sw0", - .active_low = 1, - .wakeup = 1, - }, - { - .gpio = AT91_PIN_PB28, - .code = BTN_1, - .desc = "sw1", - .active_low = 1, - .wakeup = 1, - }, - { - .gpio = AT91_PIN_PA21, - .code = BTN_2, - .desc = "sw2", - .active_low = 1, - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data csb300_button_data = { - .buttons = csb300_buttons, - .nbuttons = ARRAY_SIZE(csb300_buttons), -}; - -static struct platform_device csb300_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &csb300_button_data, - } -}; - -static void __init csb300_add_device_buttons(void) -{ - at91_set_gpio_input(AT91_PIN_PB29, 1); /* sw0 */ - at91_set_deglitch(AT91_PIN_PB29, 1); - at91_set_gpio_input(AT91_PIN_PB28, 1); /* sw1 */ - at91_set_deglitch(AT91_PIN_PB28, 1); - at91_set_gpio_input(AT91_PIN_PA21, 1); /* sw2 */ - at91_set_deglitch(AT91_PIN_PA21, 1); - - platform_device_register(&csb300_button_device); -} -#else -static void __init csb300_add_device_buttons(void) {} -#endif - -static struct gpio_led csb_leds[] = { - { /* "led0", yellow */ - .name = "led0", - .gpio = AT91_PIN_PB2, - .active_low = 1, - .default_trigger = "heartbeat", - }, - { /* "led1", green */ - .name = "led1", - .gpio = AT91_PIN_PB1, - .active_low = 1, - .default_trigger = "mmc0", - }, - { /* "led2", yellow */ - .name = "led2", - .gpio = AT91_PIN_PB0, - .active_low = 1, - .default_trigger = "ide-disk", - } -}; - - -static void __init csb337_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0 */ - at91_register_uart(0, 0, 0); - at91_add_device_serial(); - /* Ethernet */ - at91_add_device_eth(&csb337_eth_data); - /* USB Host */ - at91_add_device_usbh(&csb337_usbh_data); - /* USB Device */ - at91_add_device_udc(&csb337_udc_data); - /* I2C */ - at91_add_device_i2c(csb337_i2c_devices, ARRAY_SIZE(csb337_i2c_devices)); - /* Compact Flash */ - at91_set_gpio_input(AT91_PIN_PB22, 1); /* IOIS16 */ - at91_add_device_cf(&csb337_cf_data); - /* SPI */ - at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices)); - /* MMC */ - at91_add_device_mci(0, &csb337_mci0_data); - /* NOR flash */ - platform_device_register(&csb_flash); - /* LEDs */ - at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds)); - /* Switches on CSB300 */ - csb300_add_device_buttons(); -} - -MACHINE_START(CSB337, "Cogent CSB337") - /* Maintainer: Bill Gatliff */ - .init_time = at91rm9200_timer_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = csb337_init_early, - .init_irq = at91_init_irq_default, - .init_machine = csb337_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c deleted file mode 100644 index 18d027f529a..00000000000 --- a/arch/arm/mach-at91/board-csb637.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-csb637.c - * - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" -#include "gpio.h" - - -static void __init csb637_init_early(void) -{ - /* Initialize processor: 3.6864 MHz crystal */ - at91_initialize(3686400); -} - -static struct macb_platform_data __initdata csb637_eth_data = { - .phy_irq_pin = AT91_PIN_PC0, - .is_rmii = 0, -}; - -static struct at91_usbh_data __initdata csb637_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -static struct at91_udc_data __initdata csb637_udc_data = { - .vbus_pin = AT91_PIN_PB28, - .pullup_pin = AT91_PIN_PB1, -}; - -#define CSB_FLASH_BASE AT91_CHIPSELECT_0 -#define CSB_FLASH_SIZE SZ_16M - -static struct mtd_partition csb_flash_partitions[] = { - { - .name = "uMON flash", - .offset = 0, - .size = MTDPART_SIZ_FULL, - .mask_flags = MTD_WRITEABLE, /* read only */ - } -}; - -static struct physmap_flash_data csb_flash_data = { - .width = 2, - .parts = csb_flash_partitions, - .nr_parts = ARRAY_SIZE(csb_flash_partitions), -}; - -static struct resource csb_flash_resources[] = { - { - .start = CSB_FLASH_BASE, - .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device csb_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &csb_flash_data, - }, - .resource = csb_flash_resources, - .num_resources = ARRAY_SIZE(csb_flash_resources), -}; - -static struct gpio_led csb_leds[] = { - { /* "d1", red */ - .name = "d1", - .gpio = AT91_PIN_PB2, - .active_low = 1, - .default_trigger = "heartbeat", - }, -}; - -static void __init csb637_board_init(void) -{ - /* LED(s) */ - at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds)); - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - at91_add_device_serial(); - /* Ethernet */ - at91_add_device_eth(&csb637_eth_data); - /* USB Host */ - at91_add_device_usbh(&csb637_usbh_data); - /* USB Device */ - at91_add_device_udc(&csb637_udc_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* SPI */ - at91_add_device_spi(NULL, 0); - /* NOR flash */ - platform_device_register(&csb_flash); -} - -MACHINE_START(CSB637, "Cogent CSB637") - /* Maintainer: Bill Gatliff */ - .init_time = at91rm9200_timer_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = csb637_init_early, - .init_irq = at91_init_irq_default, - .init_machine = csb637_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-dt-rm9200.c b/arch/arm/mach-at91/board-dt-rm9200.c index 226563f850b..76dfe8f9af5 100644 --- a/arch/arm/mach-at91/board-dt-rm9200.c +++ b/arch/arm/mach-at91/board-dt-rm9200.c @@ -22,14 +22,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include "at91_aic.h" #include "generic.h" static void __init at91rm9200_dt_timer_init(void) { -#if defined(CONFIG_COMMON_CLK) of_clk_init(NULL); -#endif at91rm9200_timer_init(); } diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c index d3048ccdc41..f99246aa9b3 100644 --- a/arch/arm/mach-at91/board-dt-sam9.c +++ b/arch/arm/mach-at91/board-dt-sam9.c @@ -21,8 +21,6 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include "at91_aic.h" -#include "board.h" #include "generic.h" static const char *at91_dt_board_compat[] __initdata = { diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c index 129e2917506..8fb9ef5333f 100644 --- a/arch/arm/mach-at91/board-dt-sama5.c +++ b/arch/arm/mach-at91/board-dt-sama5.c @@ -24,7 +24,6 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include "at91_aic.h" #include "generic.h" static void __init sama5_dt_device_init(void) diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c deleted file mode 100644 index becf0a6a289..00000000000 --- a/arch/arm/mach-at91/board-eb01.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * arch/arm/mach-at91/board-eb01.c - * - * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <asm/mach-types.h> -#include <mach/hardware.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" - -static void __init at91eb01_init_irq(void) -{ - at91x40_init_interrupts(NULL); -} - -static void __init at91eb01_init_early(void) -{ - at91x40_initialize(40000000); -} - -MACHINE_START(AT91EB01, "Atmel AT91 EB01") - /* Maintainer: Greg Ungerer <gerg@snapgear.com> */ - .init_time = at91x40_timer_init, - .handle_irq = at91_aic_handle_irq, - .init_early = at91eb01_init_early, - .init_irq = at91eb01_init_irq, -MACHINE_END - diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c deleted file mode 100644 index aa457a8b22f..00000000000 --- a/arch/arm/mach-at91/board-eb9200.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-eb9200.c - * - * Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest - * by Andrew Patrikalakis - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/device.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" -#include "gpio.h" - - -static void __init eb9200_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -static struct macb_platform_data __initdata eb9200_eth_data = { - .phy_irq_pin = AT91_PIN_PC4, - .is_rmii = 1, -}; - -static struct at91_usbh_data __initdata eb9200_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -static struct at91_udc_data __initdata eb9200_udc_data = { - .vbus_pin = AT91_PIN_PD4, - .pullup_pin = AT91_PIN_PD5, -}; - -static struct at91_cf_data __initdata eb9200_cf_data = { - .irq_pin = -EINVAL, - .det_pin = AT91_PIN_PB0, - .vcc_pin = -EINVAL, - .rst_pin = AT91_PIN_PC5, -}; - -static struct mci_platform_data __initdata eb9200_mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = -EINVAL, - .wp_pin = -EINVAL, - }, -}; - -static struct i2c_board_info __initdata eb9200_i2c_devices[] = { - { - I2C_BOARD_INFO("24c512", 0x50), - }, -}; - - -static void __init eb9200_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART2 on ttyS2. (Rx, Tx) - IRDA */ - at91_register_uart(AT91RM9200_ID_US2, 2, 0); - at91_add_device_serial(); - /* Ethernet */ - at91_add_device_eth(&eb9200_eth_data); - /* USB Host */ - at91_add_device_usbh(&eb9200_usbh_data); - /* USB Device */ - at91_add_device_udc(&eb9200_udc_data); - /* I2C */ - at91_add_device_i2c(eb9200_i2c_devices, ARRAY_SIZE(eb9200_i2c_devices)); - /* Compact Flash */ - at91_add_device_cf(&eb9200_cf_data); - /* SPI */ - at91_add_device_spi(NULL, 0); - /* MMC */ - /* only supports 1 or 4 bit interface, not wired through to SPI */ - at91_add_device_mci(0, &eb9200_mci0_data); -} - -MACHINE_START(ATEB9200, "Embest ATEB9200") - .init_time = at91rm9200_timer_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = eb9200_init_early, - .init_irq = at91_init_irq_default, - .init_machine = eb9200_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c deleted file mode 100644 index ede1373ccab..00000000000 --- a/arch/arm/mach-at91/board-ecbat91.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * linux/arch/arm/mach-at91rm9200/board-ecbat91.c - * Copyright (C) 2007 emQbit.com. - * - * We started from board-dk.c, which is Copyright (C) 2005 SAN People. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/cpu.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" -#include "gpio.h" - - -static void __init ecb_at91init_early(void) -{ - /* Set cpu type: PQFP */ - at91rm9200_set_type(ARCH_REVISON_9200_PQFP); - - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -static struct macb_platform_data __initdata ecb_at91eth_data = { - .phy_irq_pin = AT91_PIN_PC4, - .is_rmii = 0, -}; - -static struct at91_usbh_data __initdata ecb_at91usbh_data = { - .ports = 1, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -static struct mci_platform_data __initdata ecbat91_mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = -EINVAL, - .wp_pin = -EINVAL, - }, -}; - - -#if defined(CONFIG_MTD_DATAFLASH) -static struct mtd_partition __initdata my_flash0_partitions[] = -{ - { /* 0x8400 */ - .name = "Darrell-loader", - .offset = 0, - .size = 12 * 1056, - }, - { - .name = "U-boot", - .offset = MTDPART_OFS_NXTBLK, - .size = 110 * 1056, - }, - { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */ - .name = "UBoot-env", - .offset = MTDPART_OFS_NXTBLK, - .size = 8 * 1056, - }, - { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */ - .name = "Kernel", - .offset = MTDPART_OFS_NXTBLK, - .size = 1534 * 1056, - }, - { /* 190200 - jffs2 root filesystem */ - .name = "Filesystem", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, /* 26 sectors */ - } -}; - -static struct flash_platform_data __initdata my_flash0_platform = { - .name = "Removable flash card", - .parts = my_flash0_partitions, - .nr_parts = ARRAY_SIZE(my_flash0_partitions) -}; - -#endif - -static struct spi_board_info __initdata ecb_at91spi_devices[] = { - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 10 * 1000 * 1000, - .bus_num = 0, -#if defined(CONFIG_MTD_DATAFLASH) - .platform_data = &my_flash0_platform, -#endif - }, - { /* User accessible spi - cs1 (250KHz) */ - .modalias = "spi-cs1", - .chip_select = 1, - .max_speed_hz = 250 * 1000, - }, - { /* User accessible spi - cs2 (1MHz) */ - .modalias = "spi-cs2", - .chip_select = 2, - .max_speed_hz = 1 * 1000 * 1000, - }, - { /* User accessible spi - cs3 (10MHz) */ - .modalias = "spi-cs3", - .chip_select = 3, - .max_speed_hz = 10 * 1000 * 1000, - }, -}; - -/* - * LEDs - */ -static struct gpio_led ecb_leds[] = { - { /* D1 */ - .name = "led1", - .gpio = AT91_PIN_PC7, - .active_low = 1, - .default_trigger = "heartbeat", - } -}; - -static void __init ecb_at91board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx & Tx only) */ - at91_register_uart(AT91RM9200_ID_US0, 1, 0); - at91_add_device_serial(); - - /* Ethernet */ - at91_add_device_eth(&ecb_at91eth_data); - - /* USB Host */ - at91_add_device_usbh(&ecb_at91usbh_data); - - /* I2C */ - at91_add_device_i2c(NULL, 0); - - /* MMC */ - at91_add_device_mci(0, &ecbat91_mci0_data); - - /* SPI */ - at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices)); - - /* LEDs */ - at91_gpio_leds(ecb_leds, ARRAY_SIZE(ecb_leds)); -} - -MACHINE_START(ECBAT91, "emQbit's ECB_AT91") - /* Maintainer: emQbit.com */ - .init_time = at91rm9200_timer_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ecb_at91init_early, - .init_irq = at91_init_irq_default, - .init_machine = ecb_at91board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c deleted file mode 100644 index 4e75321a8f2..00000000000 --- a/arch/arm/mach-at91/board-eco920.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/gpio.h> - -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/at91rm9200_mc.h> -#include <mach/at91_ramc.h> -#include <mach/cpu.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" -#include "gpio.h" - - -static void __init eco920_init_early(void) -{ - /* Set cpu type: PQFP */ - at91rm9200_set_type(ARCH_REVISON_9200_PQFP); - - at91_initialize(18432000); -} - -static struct macb_platform_data __initdata eco920_eth_data = { - .phy_irq_pin = AT91_PIN_PC2, - .is_rmii = 1, -}; - -static struct at91_usbh_data __initdata eco920_usbh_data = { - .ports = 1, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -static struct at91_udc_data __initdata eco920_udc_data = { - .vbus_pin = AT91_PIN_PB12, - .pullup_pin = AT91_PIN_PB13, -}; - -static struct mci_platform_data __initdata eco920_mci0_data = { - .slot[0] = { - .bus_width = 1, - .detect_pin = -EINVAL, - .wp_pin = -EINVAL, - }, -}; - -static struct physmap_flash_data eco920_flash_data = { - .width = 2, -}; - -static struct resource eco920_flash_resource = { - .start = 0x11000000, - .end = 0x11ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device eco920_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &eco920_flash_data, - }, - .resource = &eco920_flash_resource, - .num_resources = 1, -}; - -static struct spi_board_info eco920_spi_devices[] = { - { /* CAN controller */ - .modalias = "tlv5638", - .chip_select = 3, - .max_speed_hz = 20 * 1000 * 1000, - .mode = SPI_CPHA, - }, -}; - -/* - * LEDs - */ -static struct gpio_led eco920_leds[] = { - { /* D1 */ - .name = "led1", - .gpio = AT91_PIN_PB0, - .active_low = 1, - .default_trigger = "heartbeat", - }, - { /* D2 */ - .name = "led2", - .gpio = AT91_PIN_PB1, - .active_low = 1, - .default_trigger = "timer", - } -}; - -static void __init eco920_board_init(void) -{ - /* DBGU on ttyS0. (Rx & Tx only */ - at91_register_uart(0, 0, 0); - at91_add_device_serial(); - at91_add_device_eth(&eco920_eth_data); - at91_add_device_usbh(&eco920_usbh_data); - at91_add_device_udc(&eco920_udc_data); - - at91_add_device_mci(0, &eco920_mci0_data); - platform_device_register(&eco920_flash); - - at91_ramc_write(0, AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1) - | AT91_SMC_RWSETUP_(1) - | AT91_SMC_DBW_8 - | AT91_SMC_WSEN - | AT91_SMC_NWS_(15)); - - at91_set_A_periph(AT91_PIN_PC6, 1); - - at91_set_gpio_input(AT91_PIN_PA23, 0); - at91_set_deglitch(AT91_PIN_PA23, 1); - -/* Initialization of the Static Memory Controller for Chip Select 3 */ - at91_ramc_write(0, AT91_SMC_CSR(3), - AT91_SMC_DBW_16 | /* 16 bit */ - AT91_SMC_WSEN | - AT91_SMC_NWS_(5) | /* wait states */ - AT91_SMC_TDF_(1) /* float time */ - ); - - at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices)); - /* LEDs */ - at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds)); -} - -MACHINE_START(ECO920, "eco920") - /* Maintainer: Sascha Hauer */ - .init_time = at91rm9200_timer_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = eco920_init_early, - .init_irq = at91_init_irq_default, - .init_machine = eco920_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c deleted file mode 100644 index a6aa4a2432f..00000000000 --- a/arch/arm/mach-at91/board-flexibity.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-flexibity.c - * - * Copyright (C) 2010-2011 Flexibity - * Copyright (C) 2005 SAN People - * Copyright (C) 2006 Atmel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/input.h> -#include <linux/gpio.h> - -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" -#include "gpio.h" - -static void __init flexibity_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* USB Host port */ -static struct at91_usbh_data __initdata flexibity_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* USB Device port */ -static struct at91_udc_data __initdata flexibity_udc_data = { - .vbus_pin = AT91_PIN_PC5, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - -/* I2C devices */ -static struct i2c_board_info __initdata flexibity_i2c_devices[] = { - { - I2C_BOARD_INFO("ds1307", 0x68), - }, -}; - -/* SPI devices */ -static struct spi_board_info flexibity_spi_devices[] = { - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 1, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -}; - -/* MCI (SD/MMC) */ -static struct mci_platform_data __initdata flexibity_mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PC9, - .wp_pin = AT91_PIN_PC4, - }, -}; - -/* LEDs */ -static struct gpio_led flexibity_leds[] = { - { - .name = "usb1:green", - .gpio = AT91_PIN_PA12, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "usb1:red", - .gpio = AT91_PIN_PA13, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "usb2:green", - .gpio = AT91_PIN_PB26, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "usb2:red", - .gpio = AT91_PIN_PB27, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "usb3:green", - .gpio = AT91_PIN_PC8, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "usb3:red", - .gpio = AT91_PIN_PC6, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "usb4:green", - .gpio = AT91_PIN_PB4, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "usb4:red", - .gpio = AT91_PIN_PB5, - .active_low = 1, - .default_trigger = "default-on", - } -}; - -static void __init flexibity_board_init(void) -{ - at91_register_devices(); - - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&flexibity_usbh_data); - /* USB Device */ - at91_add_device_udc(&flexibity_udc_data); - /* I2C */ - at91_add_device_i2c(flexibity_i2c_devices, - ARRAY_SIZE(flexibity_i2c_devices)); - /* SPI */ - at91_add_device_spi(flexibity_spi_devices, - ARRAY_SIZE(flexibity_spi_devices)); - /* MMC */ - at91_add_device_mci(0, &flexibity_mci0_data); - /* LEDs */ - at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds)); -} - -MACHINE_START(FLEXIBITY, "Flexibity Connect") - /* Maintainer: Maxim Osipov */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = flexibity_init_early, - .init_irq = at91_init_irq_default, - .init_machine = flexibity_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c deleted file mode 100644 index bf5cc55c7db..00000000000 --- a/arch/arm/mach-at91/board-gsia18s.c +++ /dev/null @@ -1,585 +0,0 @@ -/* - * Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de> - * taskit GmbH - * 2010 Igor Plyatov <plyatov@gmail.com> - * GeoSIG Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/w1-gpio.h> -#include <linux/i2c.h> -#include <linux/i2c/pcf857x.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <mach/at91sam9_smc.h> -#include <mach/hardware.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gsia18s.h" -#include "stamp9g20.h" -#include "gpio.h" - -static void __init gsia18s_init_early(void) -{ - stamp9g20_init_early(); -} - -/* - * Two USB Host ports - */ -static struct at91_usbh_data __initdata usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata udc_data = { - .vbus_pin = AT91_PIN_PA22, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata macb_data = { - .phy_irq_pin = AT91_PIN_PA28, - .is_rmii = 1, -}; - -/* - * LEDs and GPOs - */ -static struct gpio_led gpio_leds[] = { - { - .name = "gpo:spi1reset", - .gpio = AT91_PIN_PC1, - .active_low = 0, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { - .name = "gpo:trig_net_out", - .gpio = AT91_PIN_PB20, - .active_low = 0, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { - .name = "gpo:trig_net_dir", - .gpio = AT91_PIN_PB19, - .active_low = 0, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { - .name = "gpo:charge_dis", - .gpio = AT91_PIN_PC2, - .active_low = 0, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { - .name = "led:event", - .gpio = AT91_PIN_PB17, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { - .name = "led:lan", - .gpio = AT91_PIN_PB18, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { - .name = "led:error", - .gpio = AT91_PIN_PB16, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_ON, - } -}; - -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds = { - .name = "leds-gpio", - .id = 0, - .dev = { - .platform_data = &gpio_led_info, - } -}; - -static void __init gsia18s_leds_init(void) -{ - platform_device_register(&leds); -} - -/* PCF8574 0x20 GPIO - U1 on the GS_IA18-CB_V3 board */ -static struct gpio_led pcf_gpio_leds1[] = { - { /* bit 0 */ - .name = "gpo:hdc_power", - .gpio = PCF_GPIO_HDC_POWER, - .active_low = 0, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { /* bit 1 */ - .name = "gpo:wifi_setup", - .gpio = PCF_GPIO_WIFI_SETUP, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { /* bit 2 */ - .name = "gpo:wifi_enable", - .gpio = PCF_GPIO_WIFI_ENABLE, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { /* bit 3 */ - .name = "gpo:wifi_reset", - .gpio = PCF_GPIO_WIFI_RESET, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, - /* bit 4 used as GPI */ - { /* bit 5 */ - .name = "gpo:gps_setup", - .gpio = PCF_GPIO_GPS_SETUP, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { /* bit 6 */ - .name = "gpo:gps_standby", - .gpio = PCF_GPIO_GPS_STANDBY, - .active_low = 0, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, - { /* bit 7 */ - .name = "gpo:gps_power", - .gpio = PCF_GPIO_GPS_POWER, - .active_low = 0, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - } -}; - -static struct gpio_led_platform_data pcf_gpio_led_info1 = { - .leds = pcf_gpio_leds1, - .num_leds = ARRAY_SIZE(pcf_gpio_leds1), -}; - -static struct platform_device pcf_leds1 = { - .name = "leds-gpio", /* GS_IA18-CB_board */ - .id = 1, - .dev = { - .platform_data = &pcf_gpio_led_info1, - } -}; - -/* PCF8574 0x22 GPIO - U1 on the GS_2G_OPT1-A_V0 board (Alarm) */ -static struct gpio_led pcf_gpio_leds2[] = { - { /* bit 0 */ - .name = "gpo:alarm_1", - .gpio = PCF_GPIO_ALARM1, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { /* bit 1 */ - .name = "gpo:alarm_2", - .gpio = PCF_GPIO_ALARM2, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { /* bit 2 */ - .name = "gpo:alarm_3", - .gpio = PCF_GPIO_ALARM3, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { /* bit 3 */ - .name = "gpo:alarm_4", - .gpio = PCF_GPIO_ALARM4, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - /* bits 4, 5, 6 not used */ - { /* bit 7 */ - .name = "gpo:alarm_v_relay_on", - .gpio = PCF_GPIO_ALARM_V_RELAY_ON, - .active_low = 0, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, -}; - -static struct gpio_led_platform_data pcf_gpio_led_info2 = { - .leds = pcf_gpio_leds2, - .num_leds = ARRAY_SIZE(pcf_gpio_leds2), -}; - -static struct platform_device pcf_leds2 = { - .name = "leds-gpio", - .id = 2, - .dev = { - .platform_data = &pcf_gpio_led_info2, - } -}; - -/* PCF8574 0x24 GPIO U1 on the GS_2G-OPT23-A_V0 board (Modem) */ -static struct gpio_led pcf_gpio_leds3[] = { - { /* bit 0 */ - .name = "gpo:modem_power", - .gpio = PCF_GPIO_MODEM_POWER, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - /* bits 1 and 2 not used */ - { /* bit 3 */ - .name = "gpo:modem_reset", - .gpio = PCF_GPIO_MODEM_RESET, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, - /* bits 4, 5 and 6 not used */ - { /* bit 7 */ - .name = "gpo:trx_reset", - .gpio = PCF_GPIO_TRX_RESET, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_ON, - } -}; - -static struct gpio_led_platform_data pcf_gpio_led_info3 = { - .leds = pcf_gpio_leds3, - .num_leds = ARRAY_SIZE(pcf_gpio_leds3), -}; - -static struct platform_device pcf_leds3 = { - .name = "leds-gpio", - .id = 3, - .dev = { - .platform_data = &pcf_gpio_led_info3, - } -}; - -static void __init gsia18s_pcf_leds_init(void) -{ - platform_device_register(&pcf_leds1); - platform_device_register(&pcf_leds2); - platform_device_register(&pcf_leds3); -} - -/* - * SPI busses. - */ -static struct spi_board_info gsia18s_spi_devices[] = { - { /* User accessible spi0, cs0 used for communication with MSP RTC */ - .modalias = "spidev", - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 580000, - .mode = SPI_MODE_1, - }, - { /* User accessible spi1, cs0 used for communication with int. DSP */ - .modalias = "spidev", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 5600000, - .mode = SPI_MODE_0, - }, - { /* User accessible spi1, cs1 used for communication with ext. DSP */ - .modalias = "spidev", - .bus_num = 1, - .chip_select = 1, - .max_speed_hz = 5600000, - .mode = SPI_MODE_0, - }, - { /* User accessible spi1, cs2 used for communication with ext. DSP */ - .modalias = "spidev", - .bus_num = 1, - .chip_select = 2, - .max_speed_hz = 5600000, - .mode = SPI_MODE_0, - }, - { /* User accessible spi1, cs3 used for communication with ext. DSP */ - .modalias = "spidev", - .bus_num = 1, - .chip_select = 3, - .max_speed_hz = 5600000, - .mode = SPI_MODE_0, - } -}; - -/* - * GPI Buttons - */ -static struct gpio_keys_button buttons[] = { - { - .gpio = GPIO_TRIG_NET_IN, - .code = BTN_1, - .desc = "TRIG_NET_IN", - .type = EV_KEY, - .active_low = 0, - .wakeup = 1, - }, - { /* SW80 on the GS_IA18_S-MN board*/ - .gpio = GPIO_CARD_UNMOUNT_0, - .code = BTN_2, - .desc = "Card umount 0", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - }, - { /* SW79 on the GS_IA18_S-MN board*/ - .gpio = GPIO_CARD_UNMOUNT_1, - .code = BTN_3, - .desc = "Card umount 1", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - }, - { /* SW280 on the GS_IA18-CB board*/ - .gpio = GPIO_KEY_POWER, - .code = KEY_POWER, - .desc = "Power Off Button", - .type = EV_KEY, - .active_low = 0, - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data button_data = { - .buttons = buttons, - .nbuttons = ARRAY_SIZE(buttons), -}; - -static struct platform_device button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &button_data, - } -}; - -static void __init gsia18s_add_device_buttons(void) -{ - at91_set_gpio_input(GPIO_TRIG_NET_IN, 1); - at91_set_deglitch(GPIO_TRIG_NET_IN, 1); - at91_set_gpio_input(GPIO_CARD_UNMOUNT_0, 1); - at91_set_deglitch(GPIO_CARD_UNMOUNT_0, 1); - at91_set_gpio_input(GPIO_CARD_UNMOUNT_1, 1); - at91_set_deglitch(GPIO_CARD_UNMOUNT_1, 1); - at91_set_gpio_input(GPIO_KEY_POWER, 0); - at91_set_deglitch(GPIO_KEY_POWER, 1); - - platform_device_register(&button_device); -} - -/* - * I2C - */ -static int pcf8574x_0x20_setup(struct i2c_client *client, int gpio, - unsigned int ngpio, void *context) -{ - int status; - - status = gpio_request(gpio + PCF_GPIO_ETH_DETECT, "eth_det"); - if (status < 0) { - pr_err("error: can't request GPIO%d\n", - gpio + PCF_GPIO_ETH_DETECT); - return status; - } - status = gpio_direction_input(gpio + PCF_GPIO_ETH_DETECT); - if (status < 0) { - pr_err("error: can't setup GPIO%d as input\n", - gpio + PCF_GPIO_ETH_DETECT); - return status; - } - status = gpio_export(gpio + PCF_GPIO_ETH_DETECT, false); - if (status < 0) { - pr_err("error: can't export GPIO%d\n", - gpio + PCF_GPIO_ETH_DETECT); - return status; - } - status = gpio_sysfs_set_active_low(gpio + PCF_GPIO_ETH_DETECT, 1); - if (status < 0) { - pr_err("error: gpio_sysfs_set active_low(GPIO%d, 1)\n", - gpio + PCF_GPIO_ETH_DETECT); - return status; - } - - return 0; -} - -static int pcf8574x_0x20_teardown(struct i2c_client *client, int gpio, - unsigned ngpio, void *context) -{ - gpio_free(gpio + PCF_GPIO_ETH_DETECT); - return 0; -} - -static struct pcf857x_platform_data pcf20_pdata = { - .gpio_base = GS_IA18_S_PCF_GPIO_BASE0, - .n_latch = (1 << 4), - .setup = pcf8574x_0x20_setup, - .teardown = pcf8574x_0x20_teardown, -}; - -static struct pcf857x_platform_data pcf22_pdata = { - .gpio_base = GS_IA18_S_PCF_GPIO_BASE1, -}; - -static struct pcf857x_platform_data pcf24_pdata = { - .gpio_base = GS_IA18_S_PCF_GPIO_BASE2, -}; - -static struct i2c_board_info __initdata gsia18s_i2c_devices[] = { - { /* U1 on the GS_IA18-CB_V3 board */ - I2C_BOARD_INFO("pcf8574", 0x20), - .platform_data = &pcf20_pdata, - }, - { /* U1 on the GS_2G_OPT1-A_V0 board (Alarm) */ - I2C_BOARD_INFO("pcf8574", 0x22), - .platform_data = &pcf22_pdata, - }, - { /* U1 on the GS_2G-OPT23-A_V0 board (Modem) */ - I2C_BOARD_INFO("pcf8574", 0x24), - .platform_data = &pcf24_pdata, - }, - { /* U161 on the GS_IA18_S-MN board */ - I2C_BOARD_INFO("24c1024", 0x50), - }, - { /* U162 on the GS_IA18_S-MN board */ - I2C_BOARD_INFO("24c01", 0x53), - }, -}; - -/* - * Compact Flash - */ -static struct at91_cf_data __initdata gsia18s_cf1_data = { - .irq_pin = AT91_PIN_PA27, - .det_pin = AT91_PIN_PB30, - .vcc_pin = -EINVAL, - .rst_pin = AT91_PIN_PB31, - .chipselect = 5, - .flags = AT91_CF_TRUE_IDE, -}; - -/* Power Off by RTC */ -static void gsia18s_power_off(void) -{ - pr_notice("Power supply will be switched off automatically now or after 60 seconds without ArmDAS.\n"); - at91_set_gpio_output(AT91_PIN_PA25, 1); - /* Spin to death... */ - while (1) - ; -} - -static int __init gsia18s_power_off_init(void) -{ - pm_power_off = gsia18s_power_off; - return 0; -} - -/* ---------------------------------------------------------------------------*/ - -static void __init gsia18s_board_init(void) -{ - /* - * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI). - * Used for Internal Analog Modem. - */ - at91_register_uart(AT91SAM9260_ID_US0, 1, - ATMEL_UART_CTS | ATMEL_UART_RTS | - ATMEL_UART_DTR | ATMEL_UART_DSR | - ATMEL_UART_DCD | ATMEL_UART_RI); - /* - * USART1 on ttyS2 (Rx, Tx, CTS, RTS). - * Used for GPS or WiFi or Data stream. - */ - at91_register_uart(AT91SAM9260_ID_US1, 2, - ATMEL_UART_CTS | ATMEL_UART_RTS); - /* - * USART2 on ttyS3 (Rx, Tx, CTS, RTS). - * Used for External Modem. - */ - at91_register_uart(AT91SAM9260_ID_US2, 3, - ATMEL_UART_CTS | ATMEL_UART_RTS); - /* - * USART3 on ttyS4 (Rx, Tx, RTS). - * Used for RS-485. - */ - at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS); - - /* - * USART4 on ttyS5 (Rx, Tx). - * Used for TRX433 Radio Module. - */ - at91_register_uart(AT91SAM9260_ID_US4, 5, 0); - stamp9g20_board_init(); - at91_add_device_usbh(&usbh_data); - at91_add_device_udc(&udc_data); - at91_add_device_eth(&macb_data); - gsia18s_leds_init(); - gsia18s_pcf_leds_init(); - gsia18s_add_device_buttons(); - at91_add_device_i2c(gsia18s_i2c_devices, - ARRAY_SIZE(gsia18s_i2c_devices)); - at91_add_device_cf(&gsia18s_cf1_data); - at91_add_device_spi(gsia18s_spi_devices, - ARRAY_SIZE(gsia18s_spi_devices)); - gsia18s_power_off_init(); -} - -MACHINE_START(GSIA18S, "GS_IA18_S") - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = gsia18s_init_early, - .init_irq = at91_init_irq_default, - .init_machine = gsia18s_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c deleted file mode 100644 index 93b1df42f63..00000000000 --- a/arch/arm/mach-at91/board-kafa.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-kafa.c - * - * Copyright (C) 2006 Sperry-Sun - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/cpu.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" -#include "gpio.h" - - -static void __init kafa_init_early(void) -{ - /* Set cpu type: PQFP */ - at91rm9200_set_type(ARCH_REVISON_9200_PQFP); - - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -static struct macb_platform_data __initdata kafa_eth_data = { - .phy_irq_pin = AT91_PIN_PC4, - .is_rmii = 0, -}; - -static struct at91_usbh_data __initdata kafa_usbh_data = { - .ports = 1, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -static struct at91_udc_data __initdata kafa_udc_data = { - .vbus_pin = AT91_PIN_PB6, - .pullup_pin = AT91_PIN_PB7, -}; - -/* - * LEDs - */ -static struct gpio_led kafa_leds[] = { - { /* D1 */ - .name = "led1", - .gpio = AT91_PIN_PB4, - .active_low = 1, - .default_trigger = "heartbeat", - }, -}; - -static void __init kafa_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_add_device_serial(); - /* Ethernet */ - at91_add_device_eth(&kafa_eth_data); - /* USB Host */ - at91_add_device_usbh(&kafa_usbh_data); - /* USB Device */ - at91_add_device_udc(&kafa_udc_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* SPI */ - at91_add_device_spi(NULL, 0); - /* LEDs */ - at91_gpio_leds(kafa_leds, ARRAY_SIZE(kafa_leds)); -} - -MACHINE_START(KAFA, "Sperry-Sun KAFA") - /* Maintainer: Sergei Sharonov */ - .init_time = at91rm9200_timer_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = kafa_init_early, - .init_irq = at91_init_irq_default, - .init_machine = kafa_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c deleted file mode 100644 index d58d36225e0..00000000000 --- a/arch/arm/mach-at91/board-kb9202.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-kb9202.c - * - * Copyright (c) 2005 kb_admin - * KwikByte, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/cpu.h> -#include <mach/at91rm9200_mc.h> -#include <mach/at91_ramc.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" -#include "gpio.h" - - -static void __init kb9202_init_early(void) -{ - /* Set cpu type: PQFP */ - at91rm9200_set_type(ARCH_REVISON_9200_PQFP); - - /* Initialize processor: 10 MHz crystal */ - at91_initialize(10000000); -} - -static struct macb_platform_data __initdata kb9202_eth_data = { - .phy_irq_pin = AT91_PIN_PB29, - .is_rmii = 0, -}; - -static struct at91_usbh_data __initdata kb9202_usbh_data = { - .ports = 1, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -static struct at91_udc_data __initdata kb9202_udc_data = { - .vbus_pin = AT91_PIN_PB24, - .pullup_pin = AT91_PIN_PB22, -}; - -static struct mci_platform_data __initdata kb9202_mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PB2, - .wp_pin = -EINVAL, - }, -}; - -static struct mtd_partition __initdata kb9202_nand_partition[] = { - { - .name = "nand_fs", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata kb9202_nand_data = { - .ale = 22, - .cle = 21, - .det_pin = -EINVAL, - .rdy_pin = AT91_PIN_PC29, - .enable_pin = AT91_PIN_PC28, - .ecc_mode = NAND_ECC_SOFT, - .parts = kb9202_nand_partition, - .num_parts = ARRAY_SIZE(kb9202_nand_partition), -}; - -/* - * LEDs - */ -static struct gpio_led kb9202_leds[] = { - { /* D1 */ - .name = "led1", - .gpio = AT91_PIN_PC19, - .active_low = 1, - .default_trigger = "heartbeat", - }, - { /* D2 */ - .name = "led2", - .gpio = AT91_PIN_PC18, - .active_low = 1, - .default_trigger = "timer", - } -}; - -static void __init kb9202_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1 (Rx & Tx only) */ - at91_register_uart(AT91RM9200_ID_US0, 1, 0); - - /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */ - at91_register_uart(AT91RM9200_ID_US1, 2, 0); - - /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */ - at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_add_device_serial(); - /* Ethernet */ - at91_add_device_eth(&kb9202_eth_data); - /* USB Host */ - at91_add_device_usbh(&kb9202_usbh_data); - /* USB Device */ - at91_add_device_udc(&kb9202_udc_data); - /* MMC */ - at91_add_device_mci(0, &kb9202_mci0_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* SPI */ - at91_add_device_spi(NULL, 0); - /* NAND */ - at91_add_device_nand(&kb9202_nand_data); - /* LEDs */ - at91_gpio_leds(kb9202_leds, ARRAY_SIZE(kb9202_leds)); -} - -MACHINE_START(KB9200, "KB920x") - /* Maintainer: KwikByte, Inc. */ - .init_time = at91rm9200_timer_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = kb9202_init_early, - .init_irq = at91_init_irq_default, - .init_machine = kb9202_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c deleted file mode 100644 index 9c26b94ce44..00000000000 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de> - * taskit GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* - * copied and adjusted from board-stamp9g20.c - * by Peter Gsellmann <pgsellmann@portner-elektronik.at> - */ - -#include <linux/mm.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/w1-gpio.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <mach/at91sam9_smc.h> -#include <mach/hardware.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "stamp9g20.h" -#include "gpio.h" - - -static void __init pcontrol_g20_init_early(void) -{ - stamp9g20_init_early(); -} - -static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { { - .ncs_read_setup = 16, - .nrd_setup = 18, - .ncs_write_setup = 16, - .nwe_setup = 18, - - .ncs_read_pulse = 63, - .nrd_pulse = 55, - .ncs_write_pulse = 63, - .nwe_pulse = 55, - - .read_cycle = 127, - .write_cycle = 127, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE - | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_SELECT - | AT91_SMC_DBW_8 | AT91_SMC_PS_4 - | AT91_SMC_TDFMODE, - .tdf_cycles = 3, -}, { - .ncs_read_setup = 0, - .nrd_setup = 0, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 8, - .nrd_pulse = 8, - .ncs_write_pulse = 5, - .nwe_pulse = 4, - - .read_cycle = 8, - .write_cycle = 7, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE - | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_SELECT - | AT91_SMC_DBW_16 | AT91_SMC_PS_8 - | AT91_SMC_TDFMODE, - .tdf_cycles = 1, -} }; - -static void __init add_device_pcontrol(void) -{ - /* configure chip-select 4 (IO compatible to 8051 X4 ) */ - sam9_smc_configure(0, 4, &pcontrol_smc_config[0]); - /* configure chip-select 7 (FerroRAM 256KiBx16bit MR2A16A D4 ) */ - sam9_smc_configure(0, 7, &pcontrol_smc_config[1]); -} - - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - - -/* - * USB Device port - */ -static struct at91_udc_data __initdata pcontrol_g20_udc_data = { - .vbus_pin = AT91_PIN_PA22, /* Detect +5V bus voltage */ - .pullup_pin = AT91_PIN_PA4, /* K-state, active low */ -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata macb_data = { - .phy_irq_pin = AT91_PIN_PA28, - .is_rmii = 1, -}; - - -/* - * I2C devices: eeprom and phy/switch - */ -static struct i2c_board_info __initdata pcontrol_g20_i2c_devices[] = { -{ /* D7 address width=2, 8KiB */ - I2C_BOARD_INFO("24c64", 0x50) -}, { /* D8 address width=1, 1 byte has 32 bits! */ - I2C_BOARD_INFO("lan9303", 0x0a) -}, }; - - -/* - * LEDs - */ -static struct gpio_led pcontrol_g20_leds[] = { - { - .name = "LED1", /* red H5 */ - .gpio = AT91_PIN_PB18, - .active_low = 1, - .default_trigger = "none", /* supervisor */ - }, { - .name = "LED2", /* yellow H7 */ - .gpio = AT91_PIN_PB19, - .active_low = 1, - .default_trigger = "mmc0", /* SD-card activity */ - }, { - .name = "LED3", /* green H2 */ - .gpio = AT91_PIN_PB20, - .active_low = 1, - .default_trigger = "heartbeat", /* blinky */ - }, { - .name = "LED4", /* red H3 */ - .gpio = AT91_PIN_PC6, - .active_low = 1, - .default_trigger = "none", /* connection lost */ - }, { - .name = "LED5", /* yellow H6 */ - .gpio = AT91_PIN_PC7, - .active_low = 1, - .default_trigger = "none", /* unsent data */ - }, { - .name = "LED6", /* green H1 */ - .gpio = AT91_PIN_PC9, - .active_low = 1, - .default_trigger = "none", /* snafu */ - } -}; - - -/* - * SPI devices - */ -static struct spi_board_info pcontrol_g20_spi_devices[] = { - { - .modalias = "spidev", /* HMI port X4 */ - .chip_select = 1, - .max_speed_hz = 50 * 1000 * 1000, - .bus_num = 0, - }, { - .modalias = "spidev", /* piggyback A2 */ - .chip_select = 0, - .max_speed_hz = 50 * 1000 * 1000, - .bus_num = 1, - }, -}; - - -static void __init pcontrol_g20_board_init(void) -{ - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS - | ATMEL_UART_RTS); - - /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485 X5 */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS - | ATMEL_UART_RTS); - - /* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */ - at91_register_uart(AT91SAM9260_ID_US4, 3, 0); - stamp9g20_board_init(); - at91_add_device_usbh(&usbh_data); - at91_add_device_eth(&macb_data); - at91_add_device_i2c(pcontrol_g20_i2c_devices, - ARRAY_SIZE(pcontrol_g20_i2c_devices)); - add_device_pcontrol(); - at91_add_device_spi(pcontrol_g20_spi_devices, - ARRAY_SIZE(pcontrol_g20_spi_devices)); - at91_add_device_udc(&pcontrol_g20_udc_data); - at91_gpio_leds(pcontrol_g20_leds, - ARRAY_SIZE(pcontrol_g20_leds)); - /* piggyback A2 */ - at91_set_gpio_output(AT91_PIN_PB31, 1); -} - - -MACHINE_START(PCONTROL_G20, "PControl G20") - /* Maintainer: pgsellmann@portner-elektronik.at */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = pcontrol_g20_init_early, - .init_irq = at91_init_irq_default, - .init_machine = pcontrol_g20_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c deleted file mode 100644 index 2c0f2d554d8..00000000000 --- a/arch/arm/mach-at91/board-picotux200.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-picotux200.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2007 Kleinhenz Elektronik GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/mtd/physmap.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/at91rm9200_mc.h> -#include <mach/at91_ramc.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" -#include "gpio.h" - - -static void __init picotux200_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -static struct macb_platform_data __initdata picotux200_eth_data = { - .phy_irq_pin = AT91_PIN_PC4, - .is_rmii = 1, -}; - -static struct at91_usbh_data __initdata picotux200_usbh_data = { - .ports = 1, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -static struct mci_platform_data __initdata picotux200_mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PB27, - .wp_pin = AT91_PIN_PA17, - }, -}; - -#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0 -#define PICOTUX200_FLASH_SIZE SZ_4M - -static struct physmap_flash_data picotux200_flash_data = { - .width = 2, -}; - -static struct resource picotux200_flash_resource = { - .start = PICOTUX200_FLASH_BASE, - .end = PICOTUX200_FLASH_BASE + PICOTUX200_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device picotux200_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &picotux200_flash_data, - }, - .resource = &picotux200_flash_resource, - .num_resources = 1, -}; - -static void __init picotux200_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - at91_add_device_serial(); - /* Ethernet */ - at91_add_device_eth(&picotux200_eth_data); - /* USB Host */ - at91_add_device_usbh(&picotux200_usbh_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* MMC */ - at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ - at91_add_device_mci(0, &picotux200_mci0_data); - /* NOR Flash */ - platform_device_register(&picotux200_flash); -} - -MACHINE_START(PICOTUX2XX, "picotux 200") - /* Maintainer: Kleinhenz Elektronik GmbH */ - .init_time = at91rm9200_timer_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = picotux200_init_early, - .init_irq = at91_init_irq_default, - .init_machine = picotux200_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c deleted file mode 100644 index 953cea41675..00000000000 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-rm9200ek.c - * - * Copyright (C) 2005 SAN People - * - * Epson S1D framebuffer glue code is: - * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/mtd/physmap.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/at91rm9200_mc.h> -#include <mach/at91_ramc.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" -#include "gpio.h" - - -static void __init ek_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -static struct macb_platform_data __initdata ek_eth_data = { - .phy_irq_pin = AT91_PIN_PC4, - .is_rmii = 1, -}; - -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PD4, - .pullup_pin = AT91_PIN_PD5, -}; - -#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD -static struct mci_platform_data __initdata ek_mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PB27, - .wp_pin = AT91_PIN_PA17, - } -}; -#endif - -static struct spi_board_info ek_spi_devices[] = { - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - }, -#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 3, - .max_speed_hz = 15 * 1000 * 1000, - }, -#endif -}; - -static struct i2c_board_info __initdata ek_i2c_devices[] = { - { - I2C_BOARD_INFO("ics1523", 0x26), - }, - { - I2C_BOARD_INFO("dac3550", 0x4d), - } -}; - -#define EK_FLASH_BASE AT91_CHIPSELECT_0 -#define EK_FLASH_SIZE SZ_8M - -static struct physmap_flash_data ek_flash_data = { - .width = 2, -}; - -static struct resource ek_flash_resource = { - .start = EK_FLASH_BASE, - .end = EK_FLASH_BASE + EK_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ek_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &ek_flash_data, - }, - .resource = &ek_flash_resource, - .num_resources = 1, -}; - -static struct gpio_led ek_leds[] = { - { /* "user led 1", DS2 */ - .name = "green", - .gpio = AT91_PIN_PB0, - .active_low = 1, - .default_trigger = "mmc0", - }, - { /* "user led 2", DS4 */ - .name = "yellow", - .gpio = AT91_PIN_PB1, - .active_low = 1, - .default_trigger = "heartbeat", - }, - { /* "user led 3", DS6 */ - .name = "red", - .gpio = AT91_PIN_PB2, - .active_low = 1, - } -}; - -static void __init ek_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - at91_add_device_serial(); - /* Ethernet */ - at91_add_device_eth(&ek_eth_data); - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - at91_add_device_udc(&ek_udc_data); - at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ - /* I2C */ - at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); - /* SPI */ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); -#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD - /* DataFlash card */ - at91_set_gpio_output(AT91_PIN_PB22, 0); -#else - /* MMC */ - at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ - at91_add_device_mci(0, &ek_mci0_data); -#endif - /* NOR Flash */ - platform_device_register(&ek_flash); - /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); - /* VGA */ -// ek_add_device_video(); -} - -MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") - /* Maintainer: SAN People/Atmel */ - .init_time = at91rm9200_timer_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c deleted file mode 100644 index c2166e3a236..00000000000 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ /dev/null @@ -1,230 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-sam9-l9260.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2006 Atmel - * Copyright (C) 2007 Olimex Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/at91sam9_smc.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - - -static void __init ek_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PC5, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - - -/* - * SPI devices. - */ -static struct spi_board_info ek_spi_devices[] = { -#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 1, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -#endif -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PA7, - .is_rmii = 0, -}; - - -/* - * NAND flash - */ -static struct mtd_partition __initdata ek_nand_partition[] = { - { - .name = "Bootloader Area", - .offset = 0, - .size = 10 * SZ_1M, - }, - { - .name = "User Area", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 21, - .cle = 22, - .det_pin = -EINVAL, - .rdy_pin = AT91_PIN_PC13, - .enable_pin = AT91_PIN_PC14, - .ecc_mode = NAND_ECC_SOFT, - .parts = ek_nand_partition, - .num_parts = ARRAY_SIZE(ek_nand_partition), -}; - -static struct sam9_smc_config __initdata ek_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 2, -}; - -static void __init ek_add_device_nand(void) -{ - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &ek_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - - -/* - * MCI (SD/MMC) - */ -static struct mci_platform_data __initdata ek_mci0_data = { - .slot[1] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PC8, - .wp_pin = AT91_PIN_PC4, - }, -}; - -/* - * LEDs - */ -static struct gpio_led ek_leds[] = { - { /* D1 */ - .name = "led1", - .gpio = AT91_PIN_PA9, - .active_low = 1, - .default_trigger = "heartbeat", - }, - { /* D2 */ - .name = "led2", - .gpio = AT91_PIN_PA6, - .active_low = 1, - .default_trigger = "timer", - } -}; - -static void __init ek_board_init(void) -{ - at91_register_devices(); - - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - at91_add_device_udc(&ek_udc_data); - /* SPI */ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); - /* NAND */ - ek_add_device_nand(); - /* Ethernet */ - at91_add_device_eth(&ek_macb_data); - /* MMC */ - at91_add_device_mci(0, &ek_mci0_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); -} - -MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") - /* Maintainer: Olimex */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c deleted file mode 100644 index bf8a946b4cd..00000000000 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ /dev/null @@ -1,354 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-sam9260ek.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2006 Atmel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/at73c213.h> -#include <linux/clk.h> -#include <linux/platform_data/at24.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/at91sam9_smc.h> -#include <mach/system_rev.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - - -static void __init ek_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PC5, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - - -/* - * Audio - */ -static struct at73c213_board_info at73c213_data = { - .ssc_id = 0, - .shortname = "AT91SAM9260-EK external DAC", -}; - -#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) -static void __init at73c213_set_clk(struct at73c213_board_info *info) -{ - struct clk *pck0; - struct clk *plla; - - pck0 = clk_get(NULL, "pck0"); - plla = clk_get(NULL, "plla"); - - /* AT73C213 MCK Clock */ - at91_set_B_periph(AT91_PIN_PC1, 0); /* PCK0 */ - - clk_set_parent(pck0, plla); - clk_put(plla); - - info->dac_clk = pck0; -} -#else -static void __init at73c213_set_clk(struct at73c213_board_info *info) {} -#endif - -/* - * SPI devices. - */ -static struct spi_board_info ek_spi_devices[] = { -#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 1, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -#endif -#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) - { /* AT73C213 DAC */ - .modalias = "at73c213", - .chip_select = 0, - .max_speed_hz = 10 * 1000 * 1000, - .bus_num = 1, - .mode = SPI_MODE_1, - .platform_data = &at73c213_data, - }, -#endif -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PA7, - .is_rmii = 1, -}; - - -/* - * NAND flash - */ -static struct mtd_partition __initdata ek_nand_partition[] = { - { - .name = "Partition 1", - .offset = 0, - .size = SZ_256K, - }, - { - .name = "Partition 2", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 21, - .cle = 22, - .det_pin = -EINVAL, - .rdy_pin = AT91_PIN_PC13, - .enable_pin = AT91_PIN_PC14, - .ecc_mode = NAND_ECC_SOFT, - .on_flash_bbt = 1, - .parts = ek_nand_partition, - .num_parts = ARRAY_SIZE(ek_nand_partition), -}; - -static struct sam9_smc_config __initdata ek_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 2, -}; - -static void __init ek_add_device_nand(void) -{ - ek_nand_data.bus_width_16 = board_have_nand_16bit(); - /* setup bus-width (8 or 16) */ - if (ek_nand_data.bus_width_16) - ek_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - ek_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &ek_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - - -/* - * MCI (SD/MMC) - */ -static struct mci_platform_data __initdata ek_mci0_data = { - .slot[1] = { - .bus_width = 4, - .detect_pin = -EINVAL, - .wp_pin = -EINVAL, - }, -}; - - -/* - * LEDs - */ -static struct gpio_led ek_leds[] = { - { /* "bottom" led, green, userled1 to be defined */ - .name = "ds5", - .gpio = AT91_PIN_PA6, - .active_low = 1, - .default_trigger = "none", - }, - { /* "power" led, yellow */ - .name = "ds1", - .gpio = AT91_PIN_PA9, - .default_trigger = "heartbeat", - } -}; - -/* - * I2C devices - */ -static struct at24_platform_data at24c512 = { - .byte_len = SZ_512K / 8, - .page_size = 128, - .flags = AT24_FLAG_ADDR16, -}; - -static struct i2c_board_info __initdata ek_i2c_devices[] = { - { - I2C_BOARD_INFO("24c512", 0x50), - .platform_data = &at24c512, - }, - /* more devices can be added using expansion connectors */ -}; - - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button ek_buttons[] = { - { - .gpio = AT91_PIN_PA30, - .code = BTN_3, - .desc = "Button 3", - .active_low = 1, - .wakeup = 1, - }, - { - .gpio = AT91_PIN_PA31, - .code = BTN_4, - .desc = "Button 4", - .active_low = 1, - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data ek_button_data = { - .buttons = ek_buttons, - .nbuttons = ARRAY_SIZE(ek_buttons), -}; - -static struct platform_device ek_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ek_button_data, - } -}; - -static void __init ek_add_device_buttons(void) -{ - at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */ - at91_set_deglitch(AT91_PIN_PA30, 1); - at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */ - at91_set_deglitch(AT91_PIN_PA31, 1); - - platform_device_register(&ek_button_device); -} -#else -static void __init ek_add_device_buttons(void) {} -#endif - - -static void __init ek_board_init(void) -{ - at91_register_devices(); - - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - at91_add_device_udc(&ek_udc_data); - /* SPI */ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); - /* NAND */ - ek_add_device_nand(); - /* Ethernet */ - at91_add_device_eth(&ek_macb_data); - /* MMC */ - at91_add_device_mci(0, &ek_mci0_data); - /* I2C */ - at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); - /* SSC (to AT73C213) */ - at73c213_set_clk(&at73c213_data); - at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); - /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); - /* Push Buttons */ - ek_add_device_buttons(); -} - -MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") - /* Maintainer: Atmel */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c deleted file mode 100644 index e85ada820bf..00000000000 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ /dev/null @@ -1,623 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-sam9261ek.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2006 Atmel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/spi/at73c213.h> -#include <linux/clk.h> -#include <linux/dm9000.h> -#include <linux/fb.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> - -#include <video/atmel_lcdc.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/at91sam9_smc.h> -#include <mach/system_rev.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - - -static void __init ek_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * DM9000 ethernet device - */ -#if defined(CONFIG_DM9000) -static struct resource dm9000_resource[] = { - [0] = { - .start = AT91_CHIPSELECT_2, - .end = AT91_CHIPSELECT_2 + 3, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = AT91_CHIPSELECT_2 + 0x44, - .end = AT91_CHIPSELECT_2 + 0xFF, - .flags = IORESOURCE_MEM - }, - [2] = { - .flags = IORESOURCE_IRQ - | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE, - } -}; - -static struct dm9000_plat_data dm9000_platdata = { - .flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM, -}; - -static struct platform_device dm9000_device = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(dm9000_resource), - .resource = dm9000_resource, - .dev = { - .platform_data = &dm9000_platdata, - } -}; - -/* - * SMC timings for the DM9000. - * Note: These timings were calculated for MASTER_CLOCK = 100000000 according to the DM9000 timings. - */ -static struct sam9_smc_config __initdata dm9000_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 2, - .ncs_write_setup = 0, - .nwe_setup = 2, - - .ncs_read_pulse = 8, - .nrd_pulse = 4, - .ncs_write_pulse = 8, - .nwe_pulse = 4, - - .read_cycle = 16, - .write_cycle = 16, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16, - .tdf_cycles = 1, -}; - -static void __init ek_add_device_dm9000(void) -{ - struct resource *r = &dm9000_resource[2]; - - /* Configure chip-select 2 (DM9000) */ - sam9_smc_configure(0, 2, &dm9000_smc_config); - - /* Configure Reset signal as output */ - at91_set_gpio_output(AT91_PIN_PC10, 0); - - /* Configure Interrupt pin as input, no pull-up */ - at91_set_gpio_input(AT91_PIN_PC11, 0); - - r->start = r->end = gpio_to_irq(AT91_PIN_PC11); - platform_device_register(&dm9000_device); -} -#else -static void __init ek_add_device_dm9000(void) {} -#endif /* CONFIG_DM9000 */ - - -/* - * USB Host Port - */ -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - - -/* - * USB Device Port - */ -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PB29, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - - -/* - * NAND flash - */ -static struct mtd_partition __initdata ek_nand_partition[] = { - { - .name = "Partition 1", - .offset = 0, - .size = SZ_256K, - }, - { - .name = "Partition 2", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 22, - .cle = 21, - .det_pin = -EINVAL, - .rdy_pin = AT91_PIN_PC15, - .enable_pin = AT91_PIN_PC14, - .ecc_mode = NAND_ECC_SOFT, - .on_flash_bbt = 1, - .parts = ek_nand_partition, - .num_parts = ARRAY_SIZE(ek_nand_partition), -}; - -static struct sam9_smc_config __initdata ek_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 2, -}; - -static void __init ek_add_device_nand(void) -{ - ek_nand_data.bus_width_16 = board_have_nand_16bit(); - /* setup bus-width (8 or 16) */ - if (ek_nand_data.bus_width_16) - ek_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - ek_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &ek_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - -/* - * SPI related devices - */ -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) - -/* - * ADS7846 Touchscreen - */ -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - -static int ads7843_pendown_state(void) -{ - return !at91_get_gpio_value(AT91_PIN_PC2); /* Touchscreen PENIRQ */ -} - -static struct ads7846_platform_data ads_info = { - .model = 7843, - .x_min = 150, - .x_max = 3830, - .y_min = 190, - .y_max = 3830, - .vref_delay_usecs = 100, - .x_plate_ohms = 450, - .y_plate_ohms = 250, - .pressure_max = 15000, - .debounce_max = 1, - .debounce_rep = 0, - .debounce_tol = (~0), - .get_pendown_state = ads7843_pendown_state, -}; - -static void __init ek_add_device_ts(void) -{ - at91_set_B_periph(AT91_PIN_PC2, 1); /* External IRQ0, with pullup */ - at91_set_gpio_input(AT91_PIN_PA11, 1); /* Touchscreen BUSY signal */ -} -#else -static void __init ek_add_device_ts(void) {} -#endif - -/* - * Audio - */ -static struct at73c213_board_info at73c213_data = { - .ssc_id = 1, - .shortname = "AT91SAM9261/9G10-EK external DAC", -}; - -#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) -static void __init at73c213_set_clk(struct at73c213_board_info *info) -{ - struct clk *pck2; - struct clk *plla; - - pck2 = clk_get(NULL, "pck2"); - plla = clk_get(NULL, "plla"); - - /* AT73C213 MCK Clock */ - at91_set_B_periph(AT91_PIN_PB31, 0); /* PCK2 */ - - clk_set_parent(pck2, plla); - clk_put(plla); - - info->dac_clk = pck2; -} -#else -static void __init at73c213_set_clk(struct at73c213_board_info *info) {} -#endif - -/* - * SPI devices - */ -static struct spi_board_info ek_spi_devices[] = { - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - { - .modalias = "ads7846", - .chip_select = 2, - .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ - .bus_num = 0, - .platform_data = &ads_info, - .irq = NR_IRQS_LEGACY + AT91SAM9261_ID_IRQ0, - .controller_data = (void *) AT91_PIN_PA28, /* CS pin */ - }, -#endif -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* DataFlash card - jumper (J12) configurable to CS3 or CS0 */ - .modalias = "mtd_dataflash", - .chip_select = 3, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#elif defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) - { /* AT73C213 DAC */ - .modalias = "at73c213", - .chip_select = 3, - .max_speed_hz = 10 * 1000 * 1000, - .bus_num = 0, - .mode = SPI_MODE_1, - .platform_data = &at73c213_data, - .controller_data = (void*) AT91_PIN_PA29, /* default for CS3 is PA6, but it must be PA29 */ - }, -#endif -}; - -#else /* CONFIG_SPI_ATMEL_* */ -/* spi0 and mmc/sd share the same PIO pins: cannot be used at the same time */ - -/* - * MCI (SD/MMC) - * det_pin, wp_pin and vcc_pin are not connected - */ -static struct mci_platform_data __initdata mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = -EINVAL, - .wp_pin = -EINVAL, - }, -}; - -#endif /* CONFIG_SPI_ATMEL_* */ - - -/* - * LCD Controller - */ -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) - -#if defined(CONFIG_FB_ATMEL_STN) - -/* STN */ -static struct fb_videomode at91_stn_modes[] = { - { - .name = "SP06Q002 @ 75", - .refresh = 75, - .xres = 320, .yres = 240, - .pixclock = KHZ2PICOS(1440), - - .left_margin = 1, .right_margin = 1, - .upper_margin = 0, .lower_margin = 0, - .hsync_len = 1, .vsync_len = 1, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, -}; - -static struct fb_monspecs at91fb_default_stn_monspecs = { - .manufacturer = "HIT", - .monitor = "SP06Q002", - - .modedb = at91_stn_modes, - .modedb_len = ARRAY_SIZE(at91_stn_modes), - .hfmin = 15000, - .hfmax = 64000, - .vfmin = 50, - .vfmax = 150, -}; - -#define AT91SAM9261_DEFAULT_STN_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ - | ATMEL_LCDC_DISTYPE_STNMONO \ - | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE \ - | ATMEL_LCDC_IFWIDTH_4 \ - | ATMEL_LCDC_SCANMOD_SINGLE) - -static void at91_lcdc_stn_power_control(struct atmel_lcdfb_pdata *pdata, int on) -{ - /* backlight */ - if (on) { /* power up */ - at91_set_gpio_value(AT91_PIN_PC14, 0); - at91_set_gpio_value(AT91_PIN_PC15, 0); - } else { /* power down */ - at91_set_gpio_value(AT91_PIN_PC14, 1); - at91_set_gpio_value(AT91_PIN_PC15, 1); - } -} - -static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = { - .default_bpp = 1, - .default_dmacon = ATMEL_LCDC_DMAEN, - .default_lcdcon2 = AT91SAM9261_DEFAULT_STN_LCDCON2, - .default_monspecs = &at91fb_default_stn_monspecs, - .atmel_lcdfb_power_control = at91_lcdc_stn_power_control, - .guard_time = 1, -}; - -#else - -/* TFT */ -static struct fb_videomode at91_tft_vga_modes[] = { - { - .name = "TX09D50VM1CCA @ 60", - .refresh = 60, - .xres = 240, .yres = 320, - .pixclock = KHZ2PICOS(4965), - - .left_margin = 1, .right_margin = 33, - .upper_margin = 1, .lower_margin = 0, - .hsync_len = 5, .vsync_len = 1, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, -}; - -static struct fb_monspecs at91fb_default_tft_monspecs = { - .manufacturer = "HIT", - .monitor = "TX09D50VM1CCA", - - .modedb = at91_tft_vga_modes, - .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), - .hfmin = 15000, - .hfmax = 64000, - .vfmin = 50, - .vfmax = 150, -}; - -#define AT91SAM9261_DEFAULT_TFT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ - | ATMEL_LCDC_DISTYPE_TFT \ - | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) - -static void at91_lcdc_tft_power_control(struct atmel_lcdfb_pdata *pdata, int on) -{ - if (on) - at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */ - else - at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */ -} - -static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = { - .lcdcon_is_backlight = true, - .default_bpp = 16, - .default_dmacon = ATMEL_LCDC_DMAEN, - .default_lcdcon2 = AT91SAM9261_DEFAULT_TFT_LCDCON2, - .default_monspecs = &at91fb_default_tft_monspecs, - .atmel_lcdfb_power_control = at91_lcdc_tft_power_control, - .guard_time = 1, -}; -#endif - -#else -static struct atmel_lcdfb_pdata __initdata ek_lcdc_data; -#endif - - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button ek_buttons[] = { - { - .gpio = AT91_PIN_PA27, - .code = BTN_0, - .desc = "Button 0", - .active_low = 1, - .wakeup = 1, - }, - { - .gpio = AT91_PIN_PA26, - .code = BTN_1, - .desc = "Button 1", - .active_low = 1, - .wakeup = 1, - }, - { - .gpio = AT91_PIN_PA25, - .code = BTN_2, - .desc = "Button 2", - .active_low = 1, - .wakeup = 1, - }, - { - .gpio = AT91_PIN_PA24, - .code = BTN_3, - .desc = "Button 3", - .active_low = 1, - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data ek_button_data = { - .buttons = ek_buttons, - .nbuttons = ARRAY_SIZE(ek_buttons), -}; - -static struct platform_device ek_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ek_button_data, - } -}; - -static void __init ek_add_device_buttons(void) -{ - at91_set_gpio_input(AT91_PIN_PA27, 1); /* btn0 */ - at91_set_deglitch(AT91_PIN_PA27, 1); - at91_set_gpio_input(AT91_PIN_PA26, 1); /* btn1 */ - at91_set_deglitch(AT91_PIN_PA26, 1); - at91_set_gpio_input(AT91_PIN_PA25, 1); /* btn2 */ - at91_set_deglitch(AT91_PIN_PA25, 1); - at91_set_gpio_input(AT91_PIN_PA24, 1); /* btn3 */ - at91_set_deglitch(AT91_PIN_PA24, 1); - - platform_device_register(&ek_button_device); -} -#else -static void __init ek_add_device_buttons(void) {} -#endif - -/* - * LEDs - */ -static struct gpio_led ek_leds[] = { - { /* "bottom" led, green, userled1 to be defined */ - .name = "ds7", - .gpio = AT91_PIN_PA14, - .active_low = 1, - .default_trigger = "none", - }, - { /* "top" led, green, userled2 to be defined */ - .name = "ds8", - .gpio = AT91_PIN_PA13, - .active_low = 1, - .default_trigger = "none", - }, - { /* "power" led, yellow */ - .name = "ds1", - .gpio = AT91_PIN_PA23, - .default_trigger = "heartbeat", - } -}; - -static void __init ek_board_init(void) -{ - at91_register_devices(); - - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - at91_add_device_serial(); - - if (cpu_is_at91sam9g10()) - ek_lcdc_data.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB; - - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - at91_add_device_udc(&ek_udc_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* NAND */ - ek_add_device_nand(); - /* DM9000 ethernet */ - ek_add_device_dm9000(); - - /* spi0 and mmc/sd share the same PIO pins */ -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) - /* SPI */ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); - /* Touchscreen */ - ek_add_device_ts(); - /* SSC (to AT73C213) */ - at73c213_set_clk(&at73c213_data); - at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX); -#else - /* MMC */ - at91_add_device_mci(0, &mci0_data); -#endif - /* LCD Controller */ - at91_add_device_lcdc(&ek_lcdc_data); - /* Push Buttons */ - ek_add_device_buttons(); - /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); -} - -MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") - /* Maintainer: Atmel */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END - -MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") - /* Maintainer: Atmel */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c deleted file mode 100644 index d76680f2a20..00000000000 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ /dev/null @@ -1,493 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-sam9263ek.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2007 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/platform_data/at24.h> -#include <linux/fb.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/leds.h> -#include <linux/pwm.h> -#include <linux/leds_pwm.h> - -#include <video/atmel_lcdc.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/at91sam9_smc.h> -#include <mach/system_rev.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - - -static void __init ek_init_early(void) -{ - /* Initialize processor: 16.367 MHz crystal */ - at91_initialize(16367660); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, - .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 }, - .vbus_pin_active_low = {1, 1}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PA25, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - - -/* - * ADS7846 Touchscreen - */ -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -static int ads7843_pendown_state(void) -{ - return !at91_get_gpio_value(AT91_PIN_PA15); /* Touchscreen PENIRQ */ -} - -static struct ads7846_platform_data ads_info = { - .model = 7843, - .x_min = 150, - .x_max = 3830, - .y_min = 190, - .y_max = 3830, - .vref_delay_usecs = 100, - .x_plate_ohms = 450, - .y_plate_ohms = 250, - .pressure_max = 15000, - .debounce_max = 1, - .debounce_rep = 0, - .debounce_tol = (~0), - .get_pendown_state = ads7843_pendown_state, -}; - -static void __init ek_add_device_ts(void) -{ - at91_set_B_periph(AT91_PIN_PA15, 1); /* External IRQ1, with pullup */ - at91_set_gpio_input(AT91_PIN_PA31, 1); /* Touchscreen BUSY signal */ -} -#else -static void __init ek_add_device_ts(void) {} -#endif - -/* - * SPI devices. - */ -static struct spi_board_info ek_spi_devices[] = { -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - { - .modalias = "ads7846", - .chip_select = 3, - .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ - .bus_num = 0, - .platform_data = &ads_info, - .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1, - }, -#endif -}; - - -/* - * MCI (SD/MMC) - */ -static struct mci_platform_data __initdata mci1_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PE18, - .wp_pin = AT91_PIN_PE19, - }, -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PE31, - .is_rmii = 1, -}; - - -/* - * NAND flash - */ -static struct mtd_partition __initdata ek_nand_partition[] = { - { - .name = "Partition 1", - .offset = 0, - .size = SZ_64M, - }, - { - .name = "Partition 2", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 21, - .cle = 22, - .det_pin = -EINVAL, - .rdy_pin = AT91_PIN_PA22, - .enable_pin = AT91_PIN_PD15, - .ecc_mode = NAND_ECC_SOFT, - .on_flash_bbt = 1, - .parts = ek_nand_partition, - .num_parts = ARRAY_SIZE(ek_nand_partition), -}; - -static struct sam9_smc_config __initdata ek_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 2, -}; - -static void __init ek_add_device_nand(void) -{ - ek_nand_data.bus_width_16 = board_have_nand_16bit(); - /* setup bus-width (8 or 16) */ - if (ek_nand_data.bus_width_16) - ek_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - ek_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &ek_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - - -/* - * I2C devices - */ -static struct at24_platform_data at24c512 = { - .byte_len = SZ_512K / 8, - .page_size = 128, - .flags = AT24_FLAG_ADDR16, -}; - - -static struct i2c_board_info __initdata ek_i2c_devices[] = { - { - I2C_BOARD_INFO("24c512", 0x50), - .platform_data = &at24c512, - }, - /* more devices can be added using expansion connectors */ -}; - -/* - * LCD Controller - */ -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static struct fb_videomode at91_tft_vga_modes[] = { - { - .name = "TX09D50VM1CCA @ 60", - .refresh = 60, - .xres = 240, .yres = 320, - .pixclock = KHZ2PICOS(4965), - - .left_margin = 1, .right_margin = 33, - .upper_margin = 1, .lower_margin = 0, - .hsync_len = 5, .vsync_len = 1, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, -}; - -static struct fb_monspecs at91fb_default_monspecs = { - .manufacturer = "HIT", - .monitor = "TX09D70VM1CCA", - - .modedb = at91_tft_vga_modes, - .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), - .hfmin = 15000, - .hfmax = 64000, - .vfmin = 50, - .vfmax = 150, -}; - -#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ - | ATMEL_LCDC_DISTYPE_TFT \ - | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) - -static void at91_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on) -{ - at91_set_gpio_value(AT91_PIN_PA30, on); -} - -/* Driver datas */ -static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = { - .lcdcon_is_backlight = true, - .default_bpp = 16, - .default_dmacon = ATMEL_LCDC_DMAEN, - .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2, - .default_monspecs = &at91fb_default_monspecs, - .atmel_lcdfb_power_control = at91_lcdc_power_control, - .guard_time = 1, -}; - -#else -static struct atmel_lcdfb_pdata __initdata ek_lcdc_data; -#endif - - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button ek_buttons[] = { - { /* BP1, "leftclic" */ - .code = BTN_LEFT, - .gpio = AT91_PIN_PC5, - .active_low = 1, - .desc = "left_click", - .wakeup = 1, - }, - { /* BP2, "rightclic" */ - .code = BTN_RIGHT, - .gpio = AT91_PIN_PC4, - .active_low = 1, - .desc = "right_click", - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data ek_button_data = { - .buttons = ek_buttons, - .nbuttons = ARRAY_SIZE(ek_buttons), -}; - -static struct platform_device ek_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ek_button_data, - } -}; - -static void __init ek_add_device_buttons(void) -{ - at91_set_GPIO_periph(AT91_PIN_PC5, 1); /* left button */ - at91_set_deglitch(AT91_PIN_PC5, 1); - at91_set_GPIO_periph(AT91_PIN_PC4, 1); /* right button */ - at91_set_deglitch(AT91_PIN_PC4, 1); - - platform_device_register(&ek_button_device); -} -#else -static void __init ek_add_device_buttons(void) {} -#endif - - -/* - * AC97 - * reset_pin is not connected: NRST - */ -static struct ac97c_platform_data ek_ac97_data = { - .reset_pin = -EINVAL, -}; - - -/* - * LEDs ... these could all be PWM-driven, for variable brightness - */ -static struct gpio_led ek_leds[] = { - { /* "right" led, green, userled2 (could be driven by pwm2) */ - .name = "ds2", - .gpio = AT91_PIN_PC29, - .active_low = 1, - .default_trigger = "nand-disk", - }, - { /* "power" led, yellow (could be driven by pwm0) */ - .name = "ds3", - .gpio = AT91_PIN_PB7, - .default_trigger = "heartbeat", - }, -#if !IS_ENABLED(CONFIG_LEDS_PWM) - { - .name = "ds1", - .gpio = AT91_PIN_PB8, - .active_low = 1, - .default_trigger = "none", - } -#endif -}; - -/* - * PWM Leds - */ -static struct pwm_lookup pwm_lookup[] = { - PWM_LOOKUP("at91sam9rl-pwm", 1, "leds_pwm", "ds1", - 5000, PWM_POLARITY_INVERSED), -}; - -#if IS_ENABLED(CONFIG_LEDS_PWM) -static struct led_pwm pwm_leds[] = { - { - .name = "ds1", - .max_brightness = 255, - }, -}; - -static struct led_pwm_platform_data pwm_data = { - .num_leds = ARRAY_SIZE(pwm_leds), - .leds = pwm_leds, -}; - -static struct platform_device leds_pwm = { - .name = "leds_pwm", - .id = -1, - .dev = { - .platform_data = &pwm_data, - }, -}; -#endif - - -/* - * CAN - */ -static void sam9263ek_transceiver_switch(int on) -{ - if (on) { - at91_set_gpio_output(AT91_PIN_PA18, 1); /* CANRXEN */ - at91_set_gpio_output(AT91_PIN_PA19, 0); /* CANRS */ - } else { - at91_set_gpio_output(AT91_PIN_PA18, 0); /* CANRXEN */ - at91_set_gpio_output(AT91_PIN_PA19, 1); /* CANRS */ - } -} - -static struct at91_can_data ek_can_data = { - .transceiver_switch = sam9263ek_transceiver_switch, -}; - -static struct platform_device *devices[] __initdata = { -#if IS_ENABLED(CONFIG_LEDS_PWM) - &leds_pwm, -#endif -}; - -static void __init ek_board_init(void) -{ - at91_register_devices(); - - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - at91_add_device_udc(&ek_udc_data); - /* SPI */ - at91_set_gpio_output(AT91_PIN_PE20, 1); /* select spi0 clock */ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); - /* Touchscreen */ - ek_add_device_ts(); - /* MMC */ - at91_add_device_mci(1, &mci1_data); - /* Ethernet */ - at91_add_device_eth(&ek_macb_data); - /* NAND */ - ek_add_device_nand(); - /* I2C */ - at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); - /* LCD Controller */ - at91_add_device_lcdc(&ek_lcdc_data); - /* Push Buttons */ - ek_add_device_buttons(); - /* AC97 */ - at91_add_device_ac97(&ek_ac97_data); - /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); - pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup)); -#if IS_ENABLED(CONFIG_LEDS_PWM) - at91_add_device_pwm(1 << AT91_PWM1); -#endif - /* CAN */ - at91_add_device_can(&ek_can_data); - /* Other platform devices */ - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") - /* Maintainer: Atmel */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c deleted file mode 100644 index 49f07521345..00000000000 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ /dev/null @@ -1,429 +0,0 @@ -/* - * Copyright (C) 2005 SAN People - * Copyright (C) 2008 Atmel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/at73c213.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/clk.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/consumer.h> - -#include <linux/platform_data/at91_adc.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/at91sam9_smc.h> -#include <mach/system_rev.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - -/* - * board revision encoding - * bit 0: - * 0 => 1 sd/mmc slot - * 1 => 2 sd/mmc slots connectors (board from revision C) - */ -#define HAVE_2MMC (1 << 0) -static int inline ek_have_2mmc(void) -{ - return machine_is_at91sam9g20ek_2mmc() || (system_rev & HAVE_2MMC); -} - - -static void __init ek_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PC5, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - - -/* - * SPI devices. - */ -static struct spi_board_info ek_spi_devices[] = { -#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 1, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -#endif -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PA7, - .is_rmii = 1, -}; - -static void __init ek_add_device_macb(void) -{ - if (ek_have_2mmc()) - ek_macb_data.phy_irq_pin = AT91_PIN_PB0; - - at91_add_device_eth(&ek_macb_data); -} - -/* - * NAND flash - */ -static struct mtd_partition __initdata ek_nand_partition[] = { - { - .name = "Bootstrap", - .offset = 0, - .size = 4 * SZ_1M, - }, - { - .name = "Partition 1", - .offset = MTDPART_OFS_NXTBLK, - .size = 60 * SZ_1M, - }, - { - .name = "Partition 2", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -/* det_pin is not connected */ -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 21, - .cle = 22, - .rdy_pin = AT91_PIN_PC13, - .enable_pin = AT91_PIN_PC14, - .det_pin = -EINVAL, - .ecc_mode = NAND_ECC_SOFT, - .on_flash_bbt = 1, - .parts = ek_nand_partition, - .num_parts = ARRAY_SIZE(ek_nand_partition), -}; - -static struct sam9_smc_config __initdata ek_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 2, - .ncs_write_setup = 0, - .nwe_setup = 2, - - .ncs_read_pulse = 4, - .nrd_pulse = 4, - .ncs_write_pulse = 4, - .nwe_pulse = 4, - - .read_cycle = 7, - .write_cycle = 7, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 3, -}; - -static void __init ek_add_device_nand(void) -{ - ek_nand_data.bus_width_16 = board_have_nand_16bit(); - /* setup bus-width (8 or 16) */ - if (ek_nand_data.bus_width_16) - ek_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - ek_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &ek_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - - -/* - * MCI (SD/MMC) - * wp_pin and vcc_pin are not connected - */ -static struct mci_platform_data __initdata ek_mmc_data = { - .slot[1] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PC9, - .wp_pin = -EINVAL, - }, - -}; - -static void __init ek_add_device_mmc(void) -{ - if (ek_have_2mmc()) { - ek_mmc_data.slot[0].bus_width = 4; - ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2; - ek_mmc_data.slot[0].wp_pin = -1; - } - at91_add_device_mci(0, &ek_mmc_data); -} - -/* - * LEDs - */ -static struct gpio_led ek_leds[] = { - { /* "bottom" led, green, userled1 to be defined */ - .name = "ds5", - .gpio = AT91_PIN_PA6, - .active_low = 1, - .default_trigger = "none", - }, - { /* "power" led, yellow */ - .name = "ds1", - .gpio = AT91_PIN_PA9, - .default_trigger = "heartbeat", - } -}; - -static void __init ek_add_device_gpio_leds(void) -{ - if (ek_have_2mmc()) { - ek_leds[0].gpio = AT91_PIN_PB8; - ek_leds[1].gpio = AT91_PIN_PB9; - } - - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); -} - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button ek_buttons[] = { - { - .gpio = AT91_PIN_PA30, - .code = BTN_3, - .desc = "Button 3", - .active_low = 1, - .wakeup = 1, - }, - { - .gpio = AT91_PIN_PA31, - .code = BTN_4, - .desc = "Button 4", - .active_low = 1, - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data ek_button_data = { - .buttons = ek_buttons, - .nbuttons = ARRAY_SIZE(ek_buttons), -}; - -static struct platform_device ek_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ek_button_data, - } -}; - -static void __init ek_add_device_buttons(void) -{ - at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */ - at91_set_deglitch(AT91_PIN_PA30, 1); - at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */ - at91_set_deglitch(AT91_PIN_PA31, 1); - - platform_device_register(&ek_button_device); -} -#else -static void __init ek_add_device_buttons(void) {} -#endif - -/* - * ADCs - */ - -static struct at91_adc_data ek_adc_data = { - .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3), - .use_external_triggers = true, - .vref = 3300, -}; - -#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) -static struct regulator_consumer_supply ek_audio_consumer_supplies[] = { - REGULATOR_SUPPLY("AVDD", "0-001b"), - REGULATOR_SUPPLY("HPVDD", "0-001b"), - REGULATOR_SUPPLY("DBVDD", "0-001b"), - REGULATOR_SUPPLY("DCVDD", "0-001b"), -}; - -static struct regulator_init_data ek_avdd_reg_init_data = { - .constraints = { - .name = "3V3", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .consumer_supplies = ek_audio_consumer_supplies, - .num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies), -}; - -static struct fixed_voltage_config ek_vdd_pdata = { - .supply_name = "board-3V3", - .microvolts = 3300000, - .gpio = -EINVAL, - .enabled_at_boot = 0, - .init_data = &ek_avdd_reg_init_data, -}; -static struct platform_device ek_voltage_regulator = { - .name = "reg-fixed-voltage", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ek_vdd_pdata, - }, -}; -static void __init ek_add_regulators(void) -{ - platform_device_register(&ek_voltage_regulator); -} -#else -static void __init ek_add_regulators(void) {} -#endif - - -static struct i2c_board_info __initdata ek_i2c_devices[] = { - { - I2C_BOARD_INFO("24c512", 0x50) - }, - { - I2C_BOARD_INFO("wm8731", 0x1b) - }, -}; - -static struct platform_device sam9g20ek_audio_device = { - .name = "at91sam9g20ek-audio", - .id = -1, -}; - -static void __init ek_add_device_audio(void) -{ - platform_device_register(&sam9g20ek_audio_device); -} - - -static void __init ek_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - at91_add_device_udc(&ek_udc_data); - /* SPI */ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); - /* NAND */ - ek_add_device_nand(); - /* Ethernet */ - ek_add_device_macb(); - /* Regulators */ - ek_add_regulators(); - /* MMC */ - ek_add_device_mmc(); - /* I2C */ - at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); - /* LEDs */ - ek_add_device_gpio_leds(); - /* Push Buttons */ - ek_add_device_buttons(); - /* ADCs */ - at91_add_device_adc(&ek_adc_data); - /* PCK0 provides MCLK to the WM8731 */ - at91_set_B_periph(AT91_PIN_PC1, 0); - /* SSC (for WM8731) */ - at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); - ek_add_device_audio(); -} - -MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") - /* Maintainer: Atmel */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END - -MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") - /* Maintainer: Atmel */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c deleted file mode 100644 index a517c7f7af9..00000000000 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ /dev/null @@ -1,527 +0,0 @@ -/* - * Board-specific setup code for the AT91SAM9M10G45 Evaluation Kit family - * - * Covers: * AT91SAM9G45-EKES board - * * AT91SAM9M10G45-EK board - * - * Copyright (C) 2009 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/fb.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/leds.h> -#include <linux/atmel-mci.h> -#include <linux/delay.h> -#include <linux/pwm.h> -#include <linux/leds_pwm.h> - -#include <linux/platform_data/at91_adc.h> - -#include <mach/hardware.h> -#include <video/atmel_lcdc.h> -#include <media/soc_camera.h> -#include <media/atmel-isi.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/at91sam9_smc.h> -#include <mach/system_rev.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - - -static void __init ek_init_early(void) -{ - /* Initialize processor: 12.000 MHz crystal */ - at91_initialize(12000000); -} - -/* - * USB HS Host port (common to OHCI & EHCI) - */ -static struct at91_usbh_data __initdata ek_usbh_hs_data = { - .ports = 2, - .vbus_pin = {AT91_PIN_PD1, AT91_PIN_PD3}, - .vbus_pin_active_low = {1, 1}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - - -/* - * USB HS Device port - */ -static struct usba_platform_data __initdata ek_usba_udc_data = { - .vbus_pin = AT91_PIN_PB19, -}; - - -/* - * SPI devices. - */ -static struct spi_board_info ek_spi_devices[] = { - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -}; - - -/* - * MCI (SD/MMC) - */ -static struct mci_platform_data __initdata mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PD10, - .wp_pin = -EINVAL, - }, -}; - -static struct mci_platform_data __initdata mci1_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PD11, - .wp_pin = AT91_PIN_PD29, - }, -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PD5, - .is_rmii = 1, -}; - - -/* - * NAND flash - */ -static struct mtd_partition __initdata ek_nand_partition[] = { - { - .name = "Partition 1", - .offset = 0, - .size = SZ_64M, - }, - { - .name = "Partition 2", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -/* det_pin is not connected */ -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 21, - .cle = 22, - .rdy_pin = AT91_PIN_PC8, - .enable_pin = AT91_PIN_PC14, - .det_pin = -EINVAL, - .ecc_mode = NAND_ECC_SOFT, - .on_flash_bbt = 1, - .parts = ek_nand_partition, - .num_parts = ARRAY_SIZE(ek_nand_partition), -}; - -static struct sam9_smc_config __initdata ek_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 2, - .ncs_write_setup = 0, - .nwe_setup = 2, - - .ncs_read_pulse = 4, - .nrd_pulse = 4, - .ncs_write_pulse = 4, - .nwe_pulse = 4, - - .read_cycle = 7, - .write_cycle = 7, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 3, -}; - -static void __init ek_add_device_nand(void) -{ - ek_nand_data.bus_width_16 = board_have_nand_16bit(); - /* setup bus-width (8 or 16) */ - if (ek_nand_data.bus_width_16) - ek_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - ek_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &ek_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - - -/* - * ISI - */ -static struct isi_platform_data __initdata isi_data = { - .frate = ISI_CFG1_FRATE_CAPTURE_ALL, - /* to use codec and preview path simultaneously */ - .full_mode = 1, - .data_width_flags = ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10, - /* ISI_MCK is provided by programmable clock or external clock */ - .mck_hz = 25000000, -}; - - -/* - * soc-camera OV2640 - */ -#if defined(CONFIG_SOC_CAMERA_OV2640) || \ - defined(CONFIG_SOC_CAMERA_OV2640_MODULE) -static unsigned long isi_camera_query_bus_param(struct soc_camera_link *link) -{ - /* ISI board for ek using default 8-bits connection */ - return SOCAM_DATAWIDTH_8; -} - -static int i2c_camera_power(struct device *dev, int on) -{ - /* enable or disable the camera */ - pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE"); - at91_set_gpio_output(AT91_PIN_PD13, !on); - - if (!on) - goto out; - - /* If enabled, give a reset impulse */ - at91_set_gpio_output(AT91_PIN_PD12, 0); - msleep(20); - at91_set_gpio_output(AT91_PIN_PD12, 1); - msleep(100); - -out: - return 0; -} - -static struct i2c_board_info i2c_camera = { - I2C_BOARD_INFO("ov2640", 0x30), -}; - -static struct soc_camera_link iclink_ov2640 = { - .bus_id = 0, - .board_info = &i2c_camera, - .i2c_adapter_id = 0, - .power = i2c_camera_power, - .query_bus_param = isi_camera_query_bus_param, -}; - -static struct platform_device isi_ov2640 = { - .name = "soc-camera-pdrv", - .id = 0, - .dev = { - .platform_data = &iclink_ov2640, - }, -}; -#endif - - -/* - * LCD Controller - */ -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static struct fb_videomode at91_tft_vga_modes[] = { - { - .name = "LG", - .refresh = 60, - .xres = 480, .yres = 272, - .pixclock = KHZ2PICOS(9000), - - .left_margin = 1, .right_margin = 1, - .upper_margin = 40, .lower_margin = 1, - .hsync_len = 45, .vsync_len = 1, - - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, -}; - -static struct fb_monspecs at91fb_default_monspecs = { - .manufacturer = "LG", - .monitor = "LB043WQ1", - - .modedb = at91_tft_vga_modes, - .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), - .hfmin = 15000, - .hfmax = 17640, - .vfmin = 57, - .vfmax = 67, -}; - -#define AT91SAM9G45_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ - | ATMEL_LCDC_DISTYPE_TFT \ - | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) - -/* Driver datas */ -static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = { - .lcdcon_is_backlight = true, - .default_bpp = 32, - .default_dmacon = ATMEL_LCDC_DMAEN, - .default_lcdcon2 = AT91SAM9G45_DEFAULT_LCDCON2, - .default_monspecs = &at91fb_default_monspecs, - .guard_time = 9, - .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, -}; - -#else -static struct atmel_lcdfb_pdata __initdata ek_lcdc_data; -#endif - - -/* - * ADCs and touchscreen - */ -static struct at91_adc_data ek_adc_data = { - .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7), - .use_external_triggers = true, - .vref = 3300, - .touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE, -}; - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button ek_buttons[] = { - { /* BP1, "leftclic" */ - .code = BTN_LEFT, - .gpio = AT91_PIN_PB6, - .active_low = 1, - .desc = "left_click", - .wakeup = 1, - }, - { /* BP2, "rightclic" */ - .code = BTN_RIGHT, - .gpio = AT91_PIN_PB7, - .active_low = 1, - .desc = "right_click", - .wakeup = 1, - }, - /* BP3, "joystick" */ - { - .code = KEY_LEFT, - .gpio = AT91_PIN_PB14, - .active_low = 1, - .desc = "Joystick Left", - }, - { - .code = KEY_RIGHT, - .gpio = AT91_PIN_PB15, - .active_low = 1, - .desc = "Joystick Right", - }, - { - .code = KEY_UP, - .gpio = AT91_PIN_PB16, - .active_low = 1, - .desc = "Joystick Up", - }, - { - .code = KEY_DOWN, - .gpio = AT91_PIN_PB17, - .active_low = 1, - .desc = "Joystick Down", - }, - { - .code = KEY_ENTER, - .gpio = AT91_PIN_PB18, - .active_low = 1, - .desc = "Joystick Press", - }, -}; - -static struct gpio_keys_platform_data ek_button_data = { - .buttons = ek_buttons, - .nbuttons = ARRAY_SIZE(ek_buttons), -}; - -static struct platform_device ek_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ek_button_data, - } -}; - -static void __init ek_add_device_buttons(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(ek_buttons); i++) { - at91_set_GPIO_periph(ek_buttons[i].gpio, 1); - at91_set_deglitch(ek_buttons[i].gpio, 1); - } - - platform_device_register(&ek_button_device); -} -#else -static void __init ek_add_device_buttons(void) {} -#endif - - -/* - * AC97 - * reset_pin is not connected: NRST - */ -static struct ac97c_platform_data ek_ac97_data = { - .reset_pin = -EINVAL, -}; - - -/* - * LEDs ... these could all be PWM-driven, for variable brightness - */ -static struct gpio_led ek_leds[] = { - { /* "top" led, red, powerled */ - .name = "d8", - .gpio = AT91_PIN_PD30, - .default_trigger = "heartbeat", - }, - { /* "left" led, green, userled2, pwm3 */ - .name = "d6", - .gpio = AT91_PIN_PD0, - .active_low = 1, - .default_trigger = "nand-disk", - }, -#if !IS_ENABLED(CONFIG_LEDS_PWM) - { /* "right" led, green, userled1, pwm1 */ - .name = "d7", - .gpio = AT91_PIN_PD31, - .active_low = 1, - .default_trigger = "mmc0", - }, -#endif -}; - - -/* - * PWM Leds - */ -static struct pwm_lookup pwm_lookup[] = { - PWM_LOOKUP("at91sam9rl-pwm", 1, "leds_pwm", "d7", - 5000, PWM_POLARITY_INVERSED), -}; - -#if IS_ENABLED(CONFIG_LEDS_PWM) -static struct led_pwm pwm_leds[] = { - { /* "right" led, green, userled1, pwm1 */ - .name = "d7", - .max_brightness = 255, - }, -}; - -static struct led_pwm_platform_data pwm_data = { - .num_leds = ARRAY_SIZE(pwm_leds), - .leds = pwm_leds, -}; - -static struct platform_device leds_pwm = { - .name = "leds_pwm", - .id = -1, - .dev = { - .platform_data = &pwm_data, - }, -}; -#endif - -static struct platform_device *devices[] __initdata = { -#if defined(CONFIG_SOC_CAMERA_OV2640) || \ - defined(CONFIG_SOC_CAMERA_OV2640_MODULE) - &isi_ov2640, -#endif -#if IS_ENABLED(CONFIG_LEDS_PWM) - &leds_pwm, -#endif -}; - -static void __init ek_board_init(void) -{ - at91_register_devices(); - - /* Serial */ - /* DGBU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 not connected on the -EK board */ - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_add_device_serial(); - /* USB HS Host */ - at91_add_device_usbh_ohci(&ek_usbh_hs_data); - at91_add_device_usbh_ehci(&ek_usbh_hs_data); - /* USB HS Device */ - at91_add_device_usba(&ek_usba_udc_data); - /* SPI */ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); - /* MMC */ - at91_add_device_mci(0, &mci0_data); - at91_add_device_mci(1, &mci1_data); - /* Ethernet */ - at91_add_device_eth(&ek_macb_data); - /* NAND */ - ek_add_device_nand(); - /* I2C */ - at91_add_device_i2c(0, NULL, 0); - /* ISI, using programmable clock as ISI_MCK */ - at91_add_device_isi(&isi_data, true); - /* LCD Controller */ - at91_add_device_lcdc(&ek_lcdc_data); - /* ADC and touchscreen */ - at91_add_device_adc(&ek_adc_data); - /* Push Buttons */ - ek_add_device_buttons(); - /* AC97 */ - at91_add_device_ac97(&ek_ac97_data); - /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); - pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup)); -#if IS_ENABLED(CONFIG_LEDS_PWM) - at91_add_device_pwm(1 << AT91_PWM1); -#endif - /* Other platform devices */ - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") - /* Maintainer: Atmel */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c deleted file mode 100644 index 8bca329b029..00000000000 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ /dev/null @@ -1,333 +0,0 @@ -/* - * Copyright (C) 2005 SAN People - * Copyright (C) 2007 Atmel Corporation - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/fb.h> -#include <linux/clk.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> -#include <linux/platform_data/at91_adc.h> - -#include <video/atmel_lcdc.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/at91sam9_smc.h> - - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - - -static void __init ek_init_early(void) -{ - /* Initialize processor: 12.000 MHz crystal */ - at91_initialize(12000000); -} - -/* - * USB HS Device port - */ -static struct usba_platform_data __initdata ek_usba_udc_data = { - .vbus_pin = AT91_PIN_PA8, -}; - - -/* - * MCI (SD/MMC) - */ -static struct mci_platform_data __initdata mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PA15, - .wp_pin = -EINVAL, - }, -}; - - -/* - * NAND flash - */ -static struct mtd_partition __initdata ek_nand_partition[] = { - { - .name = "Partition 1", - .offset = 0, - .size = SZ_256K, - }, - { - .name = "Partition 2", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 21, - .cle = 22, - .det_pin = -EINVAL, - .rdy_pin = AT91_PIN_PD17, - .enable_pin = AT91_PIN_PB6, - .ecc_mode = NAND_ECC_SOFT, - .on_flash_bbt = 1, - .parts = ek_nand_partition, - .num_parts = ARRAY_SIZE(ek_nand_partition), -}; - -static struct sam9_smc_config __initdata ek_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 2, -}; - -static void __init ek_add_device_nand(void) -{ - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &ek_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - - -/* - * SPI devices - */ -static struct spi_board_info ek_spi_devices[] = { - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -}; - - -/* - * LCD Controller - */ -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static struct fb_videomode at91_tft_vga_modes[] = { - { - .name = "TX09D50VM1CCA @ 60", - .refresh = 60, - .xres = 240, .yres = 320, - .pixclock = KHZ2PICOS(4965), - - .left_margin = 1, .right_margin = 33, - .upper_margin = 1, .lower_margin = 0, - .hsync_len = 5, .vsync_len = 1, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, -}; - -static struct fb_monspecs at91fb_default_monspecs = { - .manufacturer = "HIT", - .monitor = "TX09D50VM1CCA", - - .modedb = at91_tft_vga_modes, - .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), - .hfmin = 15000, - .hfmax = 64000, - .vfmin = 50, - .vfmax = 150, -}; - -#define AT91SAM9RL_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ - | ATMEL_LCDC_DISTYPE_TFT \ - | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) - -static void at91_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on) -{ - if (on) - at91_set_gpio_value(AT91_PIN_PC1, 0); /* power up */ - else - at91_set_gpio_value(AT91_PIN_PC1, 1); /* power down */ -} - -/* Driver datas */ -static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = { - .lcdcon_is_backlight = true, - .default_bpp = 16, - .default_dmacon = ATMEL_LCDC_DMAEN, - .default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2, - .default_monspecs = &at91fb_default_monspecs, - .atmel_lcdfb_power_control = at91_lcdc_power_control, - .guard_time = 1, - .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, -}; - -#else -static struct atmel_lcdfb_pdata __initdata ek_lcdc_data; -#endif - - -/* - * AC97 - * reset_pin is not connected: NRST - */ -static struct ac97c_platform_data ek_ac97_data = { - .reset_pin = -EINVAL, -}; - - -/* - * LEDs - */ -static struct gpio_led ek_leds[] = { - { /* "bottom" led, green, userled1 to be defined */ - .name = "ds1", - .gpio = AT91_PIN_PD15, - .active_low = 1, - .default_trigger = "none", - }, - { /* "bottom" led, green, userled2 to be defined */ - .name = "ds2", - .gpio = AT91_PIN_PD16, - .active_low = 1, - .default_trigger = "none", - }, - { /* "power" led, yellow */ - .name = "ds3", - .gpio = AT91_PIN_PD14, - .default_trigger = "heartbeat", - } -}; - - -/* - * ADC + Touchscreen - */ -static struct at91_adc_data ek_adc_data = { - .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5), - .use_external_triggers = true, - .vref = 3300, - .touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE, -}; - - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button ek_buttons[] = { - { - .gpio = AT91_PIN_PB0, - .code = BTN_2, - .desc = "Right Click", - .active_low = 1, - .wakeup = 1, - }, - { - .gpio = AT91_PIN_PB1, - .code = BTN_1, - .desc = "Left Click", - .active_low = 1, - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data ek_button_data = { - .buttons = ek_buttons, - .nbuttons = ARRAY_SIZE(ek_buttons), -}; - -static struct platform_device ek_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ek_button_data, - } -}; - -static void __init ek_add_device_buttons(void) -{ - at91_set_gpio_input(AT91_PIN_PB1, 1); /* btn1 */ - at91_set_deglitch(AT91_PIN_PB1, 1); - at91_set_gpio_input(AT91_PIN_PB0, 1); /* btn2 */ - at91_set_deglitch(AT91_PIN_PB0, 1); - - platform_device_register(&ek_button_device); -} -#else -static void __init ek_add_device_buttons(void) {} -#endif - - -static void __init ek_board_init(void) -{ - at91_register_devices(); - - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_add_device_serial(); - /* USB HS */ - at91_add_device_usba(&ek_usba_udc_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* NAND */ - ek_add_device_nand(); - /* SPI */ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); - /* MMC */ - at91_add_device_mci(0, &mci0_data); - /* LCD Controller */ - at91_add_device_lcdc(&ek_lcdc_data); - /* AC97 */ - at91_add_device_ac97(&ek_ac97_data); - /* Touch Screen Controller + ADC */ - at91_add_device_adc(&ek_adc_data); - /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); - /* Push Buttons */ - ek_add_device_buttons(); -} - -MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") - /* Maintainer: Atmel */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c deleted file mode 100644 index b4aff840a1a..00000000000 --- a/arch/arm/mach-at91/board-snapper9260.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-snapper9260.c - * - * Copyright (C) 2010 Bluewater System Ltd - * - * Author: Andre Renaud <andre@bluewatersys.com> - * Author: Ryan Mallon - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/platform_data/pca953x.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <mach/hardware.h> -#include <mach/at91sam9_smc.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - -#define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x)) - -static void __init snapper9260_init_early(void) -{ - at91_initialize(18432000); -} - -static struct at91_usbh_data __initdata snapper9260_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -static struct at91_udc_data __initdata snapper9260_udc_data = { - .vbus_pin = SNAPPER9260_IO_EXP_GPIO(5), - .vbus_active_low = 1, - .vbus_polled = 1, - .pullup_pin = -EINVAL, -}; - -static struct macb_platform_data snapper9260_macb_data = { - .phy_irq_pin = -EINVAL, - .is_rmii = 1, -}; - -static struct mtd_partition __initdata snapper9260_nand_partitions[] = { - { - .name = "Preboot", - .offset = 0, - .size = SZ_128K, - }, - { - .name = "Bootloader", - .offset = MTDPART_OFS_APPEND, - .size = SZ_256K, - }, - { - .name = "Environment", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_4M, - }, - { - .name = "Filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata snapper9260_nand_data = { - .ale = 21, - .cle = 22, - .rdy_pin = AT91_PIN_PC13, - .parts = snapper9260_nand_partitions, - .num_parts = ARRAY_SIZE(snapper9260_nand_partitions), - .bus_width_16 = 0, - .enable_pin = -EINVAL, - .det_pin = -EINVAL, - .ecc_mode = NAND_ECC_SOFT, -}; - -static struct sam9_smc_config __initdata snapper9260_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 0, - .ncs_write_setup = 0, - .nwe_setup = 0, - - .ncs_read_pulse = 5, - .nrd_pulse = 2, - .ncs_write_pulse = 5, - .nwe_pulse = 2, - - .read_cycle = 7, - .write_cycle = 7, - - .mode = (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | - AT91_SMC_EXNWMODE_DISABLE), - .tdf_cycles = 1, -}; - -static struct pca953x_platform_data snapper9260_io_expander_data = { - .gpio_base = SNAPPER9260_IO_EXP_GPIO(0), -}; - -static struct i2c_board_info __initdata snapper9260_i2c_devices[] = { - { - /* IO expander */ - I2C_BOARD_INFO("max7312", 0x28), - .platform_data = &snapper9260_io_expander_data, - }, - { - /* Audio codec */ - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, -}; - -static struct i2c_board_info __initdata snapper9260_i2c_isl1208 = { - /* RTC */ - I2C_BOARD_INFO("isl1208", 0x6f), -}; - -static void __init snapper9260_add_device_nand(void) -{ - at91_set_A_periph(AT91_PIN_PC14, 0); - sam9_smc_configure(0, 3, &snapper9260_nand_smc_config); - at91_add_device_nand(&snapper9260_nand_data); -} - -static void __init snapper9260_board_init(void) -{ - at91_register_devices(); - - at91_add_device_i2c(snapper9260_i2c_devices, - ARRAY_SIZE(snapper9260_i2c_devices)); - - snapper9260_i2c_isl1208.irq = gpio_to_irq(AT91_PIN_PA31); - i2c_register_board_info(0, &snapper9260_i2c_isl1208, 1); - - /* Debug on ttyS0 */ - at91_register_uart(0, 0, 0); - - at91_register_uart(AT91SAM9260_ID_US0, 1, - ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_register_uart(AT91SAM9260_ID_US1, 2, - ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_register_uart(AT91SAM9260_ID_US2, 3, 0); - at91_add_device_serial(); - at91_add_device_usbh(&snapper9260_usbh_data); - at91_add_device_udc(&snapper9260_udc_data); - at91_add_device_eth(&snapper9260_macb_data); - at91_add_device_ssc(AT91SAM9260_ID_SSC, (ATMEL_SSC_TF | ATMEL_SSC_TK | - ATMEL_SSC_TD | ATMEL_SSC_RD)); - snapper9260_add_device_nand(); -} - -MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = snapper9260_init_early, - .init_irq = at91_init_irq_default, - .init_machine = snapper9260_board_init, -MACHINE_END - - diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c deleted file mode 100644 index e825641a1de..00000000000 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - * Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de> - * taskit GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/mm.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/w1-gpio.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <mach/at91sam9_smc.h> -#include <mach/hardware.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - - -void __init stamp9g20_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * NAND flash - */ -static struct atmel_nand_data __initdata nand_data = { - .ale = 21, - .cle = 22, - .rdy_pin = AT91_PIN_PC13, - .enable_pin = AT91_PIN_PC14, - .bus_width_16 = 0, - .det_pin = -EINVAL, - .ecc_mode = NAND_ECC_SOFT, -}; - -static struct sam9_smc_config __initdata nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 2, - .ncs_write_setup = 0, - .nwe_setup = 2, - - .ncs_read_pulse = 4, - .nrd_pulse = 4, - .ncs_write_pulse = 4, - .nwe_pulse = 4, - - .read_cycle = 7, - .write_cycle = 7, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 3, -}; - -static void __init add_device_nand(void) -{ - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &nand_smc_config); - - at91_add_device_nand(&nand_data); -} - - -/* - * MCI (SD/MMC) - * det_pin, wp_pin and vcc_pin are not connected - */ -static struct mci_platform_data __initdata mmc_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = -1, - .wp_pin = -1, - }, -}; - - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - - -/* - * USB Device port - */ -static struct at91_udc_data __initdata portuxg20_udc_data = { - .vbus_pin = AT91_PIN_PC7, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - -static struct at91_udc_data __initdata stamp9g20evb_udc_data = { - .vbus_pin = AT91_PIN_PA22, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata macb_data = { - .phy_irq_pin = AT91_PIN_PA28, - .is_rmii = 1, -}; - - -/* - * LEDs - */ -static struct gpio_led portuxg20_leds[] = { - { - .name = "LED2", - .gpio = AT91_PIN_PC5, - .default_trigger = "none", - }, { - .name = "LED3", - .gpio = AT91_PIN_PC4, - .default_trigger = "none", - }, { - .name = "LED4", - .gpio = AT91_PIN_PC10, - .default_trigger = "heartbeat", - } -}; - -static struct gpio_led stamp9g20evb_leds[] = { - { - .name = "D8", - .gpio = AT91_PIN_PB18, - .active_low = 1, - .default_trigger = "none", - }, { - .name = "D9", - .gpio = AT91_PIN_PB19, - .active_low = 1, - .default_trigger = "none", - }, { - .name = "D10", - .gpio = AT91_PIN_PB20, - .active_low = 1, - .default_trigger = "heartbeat", - } -}; - - -/* - * SPI devices - */ -static struct spi_board_info portuxg20_spi_devices[] = { - { - .modalias = "spidev", - .chip_select = 0, - .max_speed_hz = 1 * 1000 * 1000, - .bus_num = 0, - }, { - .modalias = "spidev", - .chip_select = 0, - .max_speed_hz = 1 * 1000 * 1000, - .bus_num = 1, - }, -}; - - -/* - * Dallas 1-Wire - */ -static struct w1_gpio_platform_data w1_gpio_pdata = { - .pin = AT91_PIN_PA29, - .is_open_drain = 1, - .ext_pullup_enable_pin = -EINVAL, -}; - -static struct platform_device w1_device = { - .name = "w1-gpio", - .id = -1, - .dev.platform_data = &w1_gpio_pdata, -}; - -void add_w1(void) -{ - at91_set_GPIO_periph(w1_gpio_pdata.pin, 1); - at91_set_multi_drive(w1_gpio_pdata.pin, 1); - platform_device_register(&w1_device); -} - - -void __init stamp9g20_board_init(void) -{ - /* Serial */ - /* DGBU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - at91_add_device_serial(); - /* NAND */ - add_device_nand(); - /* MMC */ - at91_add_device_mci(0, &mmc_data); - /* W1 */ - add_w1(); -} - -static void __init portuxg20_board_init(void) -{ - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR - | ATMEL_UART_DCD | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* USART4 on ttyS5. (Rx, Tx only) */ - at91_register_uart(AT91SAM9260_ID_US4, 5, 0); - - /* USART5 on ttyS6. (Rx, Tx only) */ - at91_register_uart(AT91SAM9260_ID_US5, 6, 0); - stamp9g20_board_init(); - /* USB Host */ - at91_add_device_usbh(&usbh_data); - /* USB Device */ - at91_add_device_udc(&portuxg20_udc_data); - /* Ethernet */ - at91_add_device_eth(&macb_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* SPI */ - at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices)); - /* LEDs */ - at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds)); -} - -static void __init stamp9g20evb_board_init(void) -{ - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR - | ATMEL_UART_DCD | ATMEL_UART_RI); - stamp9g20_board_init(); - /* USB Host */ - at91_add_device_usbh(&usbh_data); - /* USB Device */ - at91_add_device_udc(&stamp9g20evb_udc_data); - /* Ethernet */ - at91_add_device_eth(&macb_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* LEDs */ - at91_gpio_leds(stamp9g20evb_leds, ARRAY_SIZE(stamp9g20evb_leds)); -} - -MACHINE_START(PORTUXG20, "taskit PortuxG20") - /* Maintainer: taskit GmbH */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = stamp9g20_init_early, - .init_irq = at91_init_irq_default, - .init_machine = portuxg20_board_init, -MACHINE_END - -MACHINE_START(STAMP9G20, "taskit Stamp9G20") - /* Maintainer: taskit GmbH */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = stamp9g20_init_early, - .init_irq = at91_init_irq_default, - .init_machine = stamp9g20evb_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c deleted file mode 100644 index 46fdb0c68a6..00000000000 --- a/arch/arm/mach-at91/board-yl-9200.c +++ /dev/null @@ -1,597 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-yl-9200.c - * - * Adapted from various board files in arch/arm/mach-at91 - * - * Modifications for YL-9200 platform: - * Copyright (C) 2007 S. Birtles - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/mtd/physmap.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/at91rm9200_mc.h> -#include <mach/at91_ramc.h> -#include <mach/cpu.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" -#include "gpio.h" - - -static void __init yl9200_init_early(void) -{ - /* Set cpu type: PQFP */ - at91rm9200_set_type(ARCH_REVISON_9200_PQFP); - - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * LEDs - */ -static struct gpio_led yl9200_leds[] = { - { /* D2 */ - .name = "led2", - .gpio = AT91_PIN_PB17, - .active_low = 1, - .default_trigger = "timer", - }, - { /* D3 */ - .name = "led3", - .gpio = AT91_PIN_PB16, - .active_low = 1, - .default_trigger = "heartbeat", - }, - { /* D4 */ - .name = "led4", - .gpio = AT91_PIN_PB15, - .active_low = 1, - }, - { /* D5 */ - .name = "led5", - .gpio = AT91_PIN_PB8, - .active_low = 1, - } -}; - -/* - * Ethernet - */ -static struct macb_platform_data __initdata yl9200_eth_data = { - .phy_irq_pin = AT91_PIN_PB28, - .is_rmii = 1, -}; - -/* - * USB Host - */ -static struct at91_usbh_data __initdata yl9200_usbh_data = { - .ports = 1, /* PQFP version of AT91RM9200 */ - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device - */ -static struct at91_udc_data __initdata yl9200_udc_data = { - .pullup_pin = AT91_PIN_PC4, - .vbus_pin = AT91_PIN_PC5, - .pullup_active_low = 1, /* Active Low due to PNP transistor (pg 7) */ - -}; - -/* - * MMC - */ -static struct mci_platform_data __initdata yl9200_mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PB9, - .wp_pin = -EINVAL, - }, -}; - -/* - * NAND Flash - */ -static struct mtd_partition __initdata yl9200_nand_partition[] = { - { - .name = "AT91 NAND partition 1, boot", - .offset = 0, - .size = SZ_256K - }, - { - .name = "AT91 NAND partition 2, kernel", - .offset = MTDPART_OFS_NXTBLK, - .size = (2 * SZ_1M) - SZ_256K - }, - { - .name = "AT91 NAND partition 3, filesystem", - .offset = MTDPART_OFS_NXTBLK, - .size = 14 * SZ_1M - }, - { - .name = "AT91 NAND partition 4, storage", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_16M - }, - { - .name = "AT91 NAND partition 5, ext-fs", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_32M - } -}; - -static struct atmel_nand_data __initdata yl9200_nand_data = { - .ale = 6, - .cle = 7, - .det_pin = -EINVAL, - .rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */ - .enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */ - .ecc_mode = NAND_ECC_SOFT, - .parts = yl9200_nand_partition, - .num_parts = ARRAY_SIZE(yl9200_nand_partition), -}; - -/* - * NOR Flash - */ -#define YL9200_FLASH_BASE AT91_CHIPSELECT_0 -#define YL9200_FLASH_SIZE SZ_16M - -static struct mtd_partition yl9200_flash_partitions[] = { - { - .name = "Bootloader", - .offset = 0, - .size = SZ_256K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_NXTBLK, - .size = (2 * SZ_1M) - SZ_256K - }, - { - .name = "Filesystem", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL - } -}; - -static struct physmap_flash_data yl9200_flash_data = { - .width = 2, - .parts = yl9200_flash_partitions, - .nr_parts = ARRAY_SIZE(yl9200_flash_partitions), -}; - -static struct resource yl9200_flash_resources[] = { - { - .start = YL9200_FLASH_BASE, - .end = YL9200_FLASH_BASE + YL9200_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device yl9200_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &yl9200_flash_data, - }, - .resource = yl9200_flash_resources, - .num_resources = ARRAY_SIZE(yl9200_flash_resources), -}; - -/* - * I2C (TWI) - */ -static struct i2c_board_info __initdata yl9200_i2c_devices[] = { - { /* EEPROM */ - I2C_BOARD_INFO("24c128", 0x50), - } -}; - -/* - * GPIO Buttons -*/ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button yl9200_buttons[] = { - { - .gpio = AT91_PIN_PA24, - .code = BTN_2, - .desc = "SW2", - .active_low = 1, - .wakeup = 1, - }, - { - .gpio = AT91_PIN_PB1, - .code = BTN_3, - .desc = "SW3", - .active_low = 1, - .wakeup = 1, - }, - { - .gpio = AT91_PIN_PB2, - .code = BTN_4, - .desc = "SW4", - .active_low = 1, - .wakeup = 1, - }, - { - .gpio = AT91_PIN_PB6, - .code = BTN_5, - .desc = "SW5", - .active_low = 1, - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data yl9200_button_data = { - .buttons = yl9200_buttons, - .nbuttons = ARRAY_SIZE(yl9200_buttons), -}; - -static struct platform_device yl9200_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &yl9200_button_data, - } -}; - -static void __init yl9200_add_device_buttons(void) -{ - at91_set_gpio_input(AT91_PIN_PA24, 1); /* SW2 */ - at91_set_deglitch(AT91_PIN_PA24, 1); - at91_set_gpio_input(AT91_PIN_PB1, 1); /* SW3 */ - at91_set_deglitch(AT91_PIN_PB1, 1); - at91_set_gpio_input(AT91_PIN_PB2, 1); /* SW4 */ - at91_set_deglitch(AT91_PIN_PB2, 1); - at91_set_gpio_input(AT91_PIN_PB6, 1); /* SW5 */ - at91_set_deglitch(AT91_PIN_PB6, 1); - - /* Enable buttons (Sheet 5) */ - at91_set_gpio_output(AT91_PIN_PB7, 1); - - platform_device_register(&yl9200_button_device); -} -#else -static void __init yl9200_add_device_buttons(void) {} -#endif - -/* - * Touchscreen - */ -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -static int ads7843_pendown_state(void) -{ - return !at91_get_gpio_value(AT91_PIN_PB11); /* Touchscreen PENIRQ */ -} - -static struct ads7846_platform_data ads_info = { - .model = 7843, - .x_min = 150, - .x_max = 3830, - .y_min = 190, - .y_max = 3830, - .vref_delay_usecs = 100, - - /* For a 8" touch-screen */ - // .x_plate_ohms = 603, - // .y_plate_ohms = 332, - - /* For a 10.4" touch-screen */ - // .x_plate_ohms = 611, - // .y_plate_ohms = 325, - - .x_plate_ohms = 576, - .y_plate_ohms = 366, - - .pressure_max = 15000, /* generally nonsense on the 7843 */ - .debounce_max = 1, - .debounce_rep = 0, - .debounce_tol = (~0), - .get_pendown_state = ads7843_pendown_state, -}; - -static void __init yl9200_add_device_ts(void) -{ - at91_set_gpio_input(AT91_PIN_PB11, 1); /* Touchscreen interrupt pin */ - at91_set_gpio_input(AT91_PIN_PB10, 1); /* Touchscreen BUSY signal - not used! */ -} -#else -static void __init yl9200_add_device_ts(void) {} -#endif - -/* - * SPI devices - */ -static struct spi_board_info yl9200_spi_devices[] = { -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - { /* Touchscreen */ - .modalias = "ads7846", - .chip_select = 0, - .max_speed_hz = 5000 * 26, - .platform_data = &ads_info, - .irq = AT91_PIN_PB11, - }, -#endif - { /* CAN */ - .modalias = "mcp2510", - .chip_select = 1, - .max_speed_hz = 25000 * 26, - .irq = AT91_PIN_PC0, - } -}; - -/* - * LCD / VGA - * - * EPSON S1D13806 FB (discontinued chip) - * EPSON S1D13506 FB - */ -#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE) -#include <video/s1d13xxxfb.h> - - -static void yl9200_init_video(void) -{ - /* NWAIT Signal */ - at91_set_A_periph(AT91_PIN_PC6, 0); - - /* Initialization of the Static Memory Controller for Chip Select 2 */ - at91_ramc_write(0, AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */ - | AT91_SMC_WSEN | AT91_SMC_NWS_(0x4) /* wait states */ - | AT91_SMC_TDF_(0x100) /* float time */ - ); -} - -static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] = -{ - {S1DREG_MISC, 0x00}, /* Miscellaneous Register*/ - {S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/ - {S1DREG_GPIO_CNF0, 0x00}, /* General IO Pins Configuration Register*/ - {S1DREG_GPIO_CTL0, 0x00}, /* General IO Pins Control Register*/ - {S1DREG_CLK_CNF, 0x11}, /* Memory Clock Configuration Register*/ - {S1DREG_LCD_CLK_CNF, 0x10}, /* LCD Pixel Clock Configuration Register*/ - {S1DREG_CRT_CLK_CNF, 0x12}, /* CRT/TV Pixel Clock Configuration Register*/ - {S1DREG_MPLUG_CLK_CNF, 0x01}, /* MediaPlug Clock Configuration Register*/ - {S1DREG_CPU2MEM_WST_SEL, 0x02}, /* CPU To Memory Wait State Select Register*/ - {S1DREG_MEM_CNF, 0x00}, /* Memory Configuration Register*/ - {S1DREG_SDRAM_REF_RATE, 0x04}, /* DRAM Refresh Rate Register, MCLK source*/ - {S1DREG_SDRAM_TC0, 0x12}, /* DRAM Timings Control Register 0*/ - {S1DREG_SDRAM_TC1, 0x02}, /* DRAM Timings Control Register 1*/ - {S1DREG_PANEL_TYPE, 0x25}, /* Panel Type Register*/ - {S1DREG_MOD_RATE, 0x00}, /* MOD Rate Register*/ - {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* LCD Horizontal Display Width Register*/ - {S1DREG_LCD_NDISP_HPER, 0x13}, /* LCD Horizontal Non-Display Period Register*/ - {S1DREG_TFT_FPLINE_START, 0x01}, /* TFT FPLINE Start Position Register*/ - {S1DREG_TFT_FPLINE_PWIDTH, 0x0c}, /* TFT FPLINE Pulse Width Register*/ - {S1DREG_LCD_DISP_VHEIGHT0, 0xDF}, /* LCD Vertical Display Height Register 0*/ - {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* LCD Vertical Display Height Register 1*/ - {S1DREG_LCD_NDISP_VPER, 0x2c}, /* LCD Vertical Non-Display Period Register*/ - {S1DREG_TFT_FPFRAME_START, 0x0a}, /* TFT FPFRAME Start Position Register*/ - {S1DREG_TFT_FPFRAME_PWIDTH, 0x02}, /* TFT FPFRAME Pulse Width Register*/ - {S1DREG_LCD_DISP_MODE, 0x05}, /* LCD Display Mode Register*/ - {S1DREG_LCD_MISC, 0x01}, /* LCD Miscellaneous Register*/ - {S1DREG_LCD_DISP_START0, 0x00}, /* LCD Display Start Address Register 0*/ - {S1DREG_LCD_DISP_START1, 0x00}, /* LCD Display Start Address Register 1*/ - {S1DREG_LCD_DISP_START2, 0x00}, /* LCD Display Start Address Register 2*/ - {S1DREG_LCD_MEM_OFF0, 0x80}, /* LCD Memory Address Offset Register 0*/ - {S1DREG_LCD_MEM_OFF1, 0x02}, /* LCD Memory Address Offset Register 1*/ - {S1DREG_LCD_PIX_PAN, 0x03}, /* LCD Pixel Panning Register*/ - {S1DREG_LCD_DISP_FIFO_HTC, 0x00}, /* LCD Display FIFO High Threshold Control Register*/ - {S1DREG_LCD_DISP_FIFO_LTC, 0x00}, /* LCD Display FIFO Low Threshold Control Register*/ - {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* CRT/TV Horizontal Display Width Register*/ - {S1DREG_CRT_NDISP_HPER, 0x13}, /* CRT/TV Horizontal Non-Display Period Register*/ - {S1DREG_CRT_HRTC_START, 0x01}, /* CRT/TV HRTC Start Position Register*/ - {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* CRT/TV HRTC Pulse Width Register*/ - {S1DREG_CRT_DISP_VHEIGHT0, 0xDF}, /* CRT/TV Vertical Display Height Register 0*/ - {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* CRT/TV Vertical Display Height Register 1*/ - {S1DREG_CRT_NDISP_VPER, 0x2B}, /* CRT/TV Vertical Non-Display Period Register*/ - {S1DREG_CRT_VRTC_START, 0x09}, /* CRT/TV VRTC Start Position Register*/ - {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* CRT/TV VRTC Pulse Width Register*/ - {S1DREG_TV_OUT_CTL, 0x18}, /* TV Output Control Register */ - {S1DREG_CRT_DISP_MODE, 0x05}, /* CRT/TV Display Mode Register, 16BPP*/ - {S1DREG_CRT_DISP_START0, 0x00}, /* CRT/TV Display Start Address Register 0*/ - {S1DREG_CRT_DISP_START1, 0x00}, /* CRT/TV Display Start Address Register 1*/ - {S1DREG_CRT_DISP_START2, 0x00}, /* CRT/TV Display Start Address Register 2*/ - {S1DREG_CRT_MEM_OFF0, 0x80}, /* CRT/TV Memory Address Offset Register 0*/ - {S1DREG_CRT_MEM_OFF1, 0x02}, /* CRT/TV Memory Address Offset Register 1*/ - {S1DREG_CRT_PIX_PAN, 0x00}, /* CRT/TV Pixel Panning Register*/ - {S1DREG_CRT_DISP_FIFO_HTC, 0x00}, /* CRT/TV Display FIFO High Threshold Control Register*/ - {S1DREG_CRT_DISP_FIFO_LTC, 0x00}, /* CRT/TV Display FIFO Low Threshold Control Register*/ - {S1DREG_LCD_CUR_CTL, 0x00}, /* LCD Ink/Cursor Control Register*/ - {S1DREG_LCD_CUR_START, 0x01}, /* LCD Ink/Cursor Start Address Register*/ - {S1DREG_LCD_CUR_XPOS0, 0x00}, /* LCD Cursor X Position Register 0*/ - {S1DREG_LCD_CUR_XPOS1, 0x00}, /* LCD Cursor X Position Register 1*/ - {S1DREG_LCD_CUR_YPOS0, 0x00}, /* LCD Cursor Y Position Register 0*/ - {S1DREG_LCD_CUR_YPOS1, 0x00}, /* LCD Cursor Y Position Register 1*/ - {S1DREG_LCD_CUR_BCTL0, 0x00}, /* LCD Ink/Cursor Blue Color 0 Register*/ - {S1DREG_LCD_CUR_GCTL0, 0x00}, /* LCD Ink/Cursor Green Color 0 Register*/ - {S1DREG_LCD_CUR_RCTL0, 0x00}, /* LCD Ink/Cursor Red Color 0 Register*/ - {S1DREG_LCD_CUR_BCTL1, 0x1F}, /* LCD Ink/Cursor Blue Color 1 Register*/ - {S1DREG_LCD_CUR_GCTL1, 0x3F}, /* LCD Ink/Cursor Green Color 1 Register*/ - {S1DREG_LCD_CUR_RCTL1, 0x1F}, /* LCD Ink/Cursor Red Color 1 Register*/ - {S1DREG_LCD_CUR_FIFO_HTC, 0x00}, /* LCD Ink/Cursor FIFO Threshold Register*/ - {S1DREG_CRT_CUR_CTL, 0x00}, /* CRT/TV Ink/Cursor Control Register*/ - {S1DREG_CRT_CUR_START, 0x01}, /* CRT/TV Ink/Cursor Start Address Register*/ - {S1DREG_CRT_CUR_XPOS0, 0x00}, /* CRT/TV Cursor X Position Register 0*/ - {S1DREG_CRT_CUR_XPOS1, 0x00}, /* CRT/TV Cursor X Position Register 1*/ - {S1DREG_CRT_CUR_YPOS0, 0x00}, /* CRT/TV Cursor Y Position Register 0*/ - {S1DREG_CRT_CUR_YPOS1, 0x00}, /* CRT/TV Cursor Y Position Register 1*/ - {S1DREG_CRT_CUR_BCTL0, 0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register*/ - {S1DREG_CRT_CUR_GCTL0, 0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register*/ - {S1DREG_CRT_CUR_RCTL0, 0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register*/ - {S1DREG_CRT_CUR_BCTL1, 0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register*/ - {S1DREG_CRT_CUR_GCTL1, 0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register*/ - {S1DREG_CRT_CUR_RCTL1, 0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register*/ - {S1DREG_CRT_CUR_FIFO_HTC, 0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register*/ - {S1DREG_BBLT_CTL0, 0x00}, /* BitBlt Control Register 0*/ - {S1DREG_BBLT_CTL1, 0x01}, /* BitBlt Control Register 1*/ - {S1DREG_BBLT_CC_EXP, 0x00}, /* BitBlt ROP Code/Color Expansion Register*/ - {S1DREG_BBLT_OP, 0x00}, /* BitBlt Operation Register*/ - {S1DREG_BBLT_SRC_START0, 0x00}, /* BitBlt Source Start Address Register 0*/ - {S1DREG_BBLT_SRC_START1, 0x00}, /* BitBlt Source Start Address Register 1*/ - {S1DREG_BBLT_SRC_START2, 0x00}, /* BitBlt Source Start Address Register 2*/ - {S1DREG_BBLT_DST_START0, 0x00}, /* BitBlt Destination Start Address Register 0*/ - {S1DREG_BBLT_DST_START1, 0x00}, /* BitBlt Destination Start Address Register 1*/ - {S1DREG_BBLT_DST_START2, 0x00}, /* BitBlt Destination Start Address Register 2*/ - {S1DREG_BBLT_MEM_OFF0, 0x00}, /* BitBlt Memory Address Offset Register 0*/ - {S1DREG_BBLT_MEM_OFF1, 0x00}, /* BitBlt Memory Address Offset Register 1*/ - {S1DREG_BBLT_WIDTH0, 0x00}, /* BitBlt Width Register 0*/ - {S1DREG_BBLT_WIDTH1, 0x00}, /* BitBlt Width Register 1*/ - {S1DREG_BBLT_HEIGHT0, 0x00}, /* BitBlt Height Register 0*/ - {S1DREG_BBLT_HEIGHT1, 0x00}, /* BitBlt Height Register 1*/ - {S1DREG_BBLT_BGC0, 0x00}, /* BitBlt Background Color Register 0*/ - {S1DREG_BBLT_BGC1, 0x00}, /* BitBlt Background Color Register 1*/ - {S1DREG_BBLT_FGC0, 0x00}, /* BitBlt Foreground Color Register 0*/ - {S1DREG_BBLT_FGC1, 0x00}, /* BitBlt Foreground Color Register 1*/ - {S1DREG_LKUP_MODE, 0x00}, /* Look-Up Table Mode Register*/ - {S1DREG_LKUP_ADDR, 0x00}, /* Look-Up Table Address Register*/ - {S1DREG_PS_CNF, 0x00}, /* Power Save Configuration Register*/ - {S1DREG_PS_STATUS, 0x00}, /* Power Save Status Register*/ - {S1DREG_CPU2MEM_WDOGT, 0x00}, /* CPU-to-Memory Access Watchdog Timer Register*/ - {S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/ -}; - -static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = { - .initregs = yl9200_s1dfb_initregs, - .initregssize = ARRAY_SIZE(yl9200_s1dfb_initregs), - .platform_init_video = yl9200_init_video, -}; - -#define YL9200_FB_REG_BASE AT91_CHIPSELECT_7 -#define YL9200_FB_VMEM_BASE YL9200_FB_REG_BASE + SZ_2M -#define YL9200_FB_VMEM_SIZE SZ_2M - -static struct resource yl9200_s1dfb_resource[] = { - [0] = { /* video mem */ - .name = "s1d13xxxfb memory", - .start = YL9200_FB_VMEM_BASE, - .end = YL9200_FB_VMEM_BASE + YL9200_FB_VMEM_SIZE -1, - .flags = IORESOURCE_MEM, - }, - [1] = { /* video registers */ - .name = "s1d13xxxfb registers", - .start = YL9200_FB_REG_BASE, - .end = YL9200_FB_REG_BASE + SZ_512 -1, - .flags = IORESOURCE_MEM, - }, -}; - -static u64 s1dfb_dmamask = DMA_BIT_MASK(32); - -static struct platform_device yl9200_s1dfb_device = { - .name = "s1d13806fb", - .id = -1, - .dev = { - .dma_mask = &s1dfb_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &yl9200_s1dfb_pdata, - }, - .resource = yl9200_s1dfb_resource, - .num_resources = ARRAY_SIZE(yl9200_s1dfb_resource), -}; - -void __init yl9200_add_device_video(void) -{ - platform_device_register(&yl9200_s1dfb_device); -} -#else -void __init yl9200_add_device_video(void) {} -#endif - - -static void __init yl9200_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART0 on ttyS2. (Rx & Tx only to JP3) */ - at91_register_uart(AT91RM9200_ID_US0, 2, 0); - - /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */ - at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS); - at91_add_device_serial(); - /* Ethernet */ - at91_add_device_eth(&yl9200_eth_data); - /* USB Host */ - at91_add_device_usbh(&yl9200_usbh_data); - /* USB Device */ - at91_add_device_udc(&yl9200_udc_data); - /* I2C */ - at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices)); - /* MMC */ - at91_add_device_mci(0, &yl9200_mci0_data); - /* NAND */ - at91_add_device_nand(&yl9200_nand_data); - /* NOR Flash */ - platform_device_register(&yl9200_flash); -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) - /* SPI */ - at91_add_device_spi(yl9200_spi_devices, ARRAY_SIZE(yl9200_spi_devices)); - /* Touchscreen */ - yl9200_add_device_ts(); -#endif - /* LEDs. */ - at91_gpio_leds(yl9200_leds, ARRAY_SIZE(yl9200_leds)); - /* Push Buttons */ - yl9200_add_device_buttons(); - /* VGA */ - yl9200_add_device_video(); -} - -MACHINE_START(YL9200, "uCdragon YL-9200") - /* Maintainer: S.Birtles */ - .init_time = at91rm9200_timer_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = yl9200_init_early, - .init_irq = at91_init_irq_default, - .init_machine = yl9200_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board.h b/arch/arm/mach-at91/board.h deleted file mode 100644 index 836e9a537e0..00000000000 --- a/arch/arm/mach-at91/board.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/board.h - * - * Copyright (C) 2005 HP Labs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * These are data structures found in platform_device.dev.platform_data, - * and describing board-specific data needed by drivers. For example, - * which pin is used for a given GPIO role. - * - * In 2.6, drivers should strongly avoid board-specific knowledge so - * that supporting new boards normally won't require driver patches. - * Most board-specific knowledge should be in arch/.../board-*.c files. - */ - -#ifndef __ASM_ARCH_BOARD_H -#define __ASM_ARCH_BOARD_H - -#include <linux/platform_data/atmel.h> - - /* USB Device */ -extern void __init at91_add_device_udc(struct at91_udc_data *data); - - /* USB High Speed Device */ -extern void __init at91_add_device_usba(struct usba_platform_data *data); - - /* Compact Flash */ -extern void __init at91_add_device_cf(struct at91_cf_data *data); - - /* MMC / SD */ - /* atmel-mci platform config */ -extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data); - -extern void __init at91_add_device_eth(struct macb_platform_data *data); - - /* USB Host */ -extern void __init at91_add_device_usbh(struct at91_usbh_data *data); -extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data); -extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data); - -extern void __init at91_add_device_nand(struct atmel_nand_data *data); - - /* I2C*/ -#if defined(CONFIG_ARCH_AT91SAM9G45) -extern void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices); -#else -extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices); -#endif - - /* SPI */ -extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices); - - /* Serial */ -#define ATMEL_UART_CTS 0x01 -#define ATMEL_UART_RTS 0x02 -#define ATMEL_UART_DSR 0x04 -#define ATMEL_UART_DTR 0x08 -#define ATMEL_UART_DCD 0x10 -#define ATMEL_UART_RI 0x20 - -extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins); - -extern struct platform_device *atmel_default_console_device; - -extern void __init at91_add_device_serial(void); - -/* - * PWM - */ -#define AT91_PWM0 0 -#define AT91_PWM1 1 -#define AT91_PWM2 2 -#define AT91_PWM3 3 - -extern void __init at91_add_device_pwm(u32 mask); - -/* - * SSC -- accessed through ssc_request(id). Drivers don't bind to SSC - * platform devices. Their SSC ID is part of their configuration data, - * along with information about which SSC signals they should use. - */ -#define ATMEL_SSC_TK 0x01 -#define ATMEL_SSC_TF 0x02 -#define ATMEL_SSC_TD 0x04 -#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD) - -#define ATMEL_SSC_RK 0x10 -#define ATMEL_SSC_RF 0x20 -#define ATMEL_SSC_RD 0x40 -#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD) - -extern void __init at91_add_device_ssc(unsigned id, unsigned pins); - - /* LCD Controller */ -struct atmel_lcdfb_pdata; -extern void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data); - - /* AC97 */ -extern void __init at91_add_device_ac97(struct ac97c_platform_data *data); - - /* ISI */ -struct isi_platform_data; -extern void __init at91_add_device_isi(struct isi_platform_data *data, - bool use_pck_as_mck); - -/* CAN */ -extern void __init at91_add_device_can(struct at91_can_data *data); - - /* LEDs */ -extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); - -#endif diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c deleted file mode 100644 index d66f102c352..00000000000 --- a/arch/arm/mach-at91/clock.c +++ /dev/null @@ -1,977 +0,0 @@ -/* - * linux/arch/arm/mach-at91/clock.c - * - * Copyright (C) 2005 David Brownell - * Copyright (C) 2005 Ivan Kokshaysky - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/fs.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/spinlock.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/of_address.h> -#include <linux/clk/at91_pmc.h> - -#include <mach/hardware.h> -#include <mach/cpu.h> - -#include <asm/proc-fns.h> - -#include "clock.h" -#include "generic.h" - -void __iomem *at91_pmc_base; -EXPORT_SYMBOL_GPL(at91_pmc_base); - -/* - * There's a lot more which can be done with clocks, including cpufreq - * integration, slow clock mode support (for system suspend), letting - * PLLB be used at other rates (on boards that don't need USB), etc. - */ - -#define clk_is_primary(x) ((x)->type & CLK_TYPE_PRIMARY) -#define clk_is_programmable(x) ((x)->type & CLK_TYPE_PROGRAMMABLE) -#define clk_is_peripheral(x) ((x)->type & CLK_TYPE_PERIPHERAL) -#define clk_is_sys(x) ((x)->type & CLK_TYPE_SYSTEM) - - -/* - * Chips have some kind of clocks : group them by functionality - */ -#define cpu_has_utmi() ( cpu_is_at91sam9rl() \ - || cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5() \ - || cpu_is_sama5d3()) - -#define cpu_has_1056M_plla() (cpu_is_sama5d3()) - -#define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \ - || cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5() \ - || cpu_is_at91sam9n12()) - -#define cpu_has_300M_plla() (cpu_is_at91sam9g10()) - -#define cpu_has_240M_plla() (cpu_is_at91sam9261() \ - || cpu_is_at91sam9263() \ - || cpu_is_at91sam9rl()) - -#define cpu_has_210M_plla() (cpu_is_at91sam9260()) - -#define cpu_has_pllb() (!(cpu_is_at91sam9rl() \ - || cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5() \ - || cpu_is_sama5d3())) - -#define cpu_has_upll() (cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5() \ - || cpu_is_sama5d3()) - -/* USB host HS & FS */ -#define cpu_has_uhp() (!cpu_is_at91sam9rl()) - -/* USB device FS only */ -#define cpu_has_udpfs() (!(cpu_is_at91sam9rl() \ - || cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5() \ - || cpu_is_sama5d3())) - -#define cpu_has_plladiv2() (cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5() \ - || cpu_is_at91sam9n12() \ - || cpu_is_sama5d3()) - -#define cpu_has_mdiv3() (cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5() \ - || cpu_is_at91sam9n12() \ - || cpu_is_sama5d3()) - -#define cpu_has_alt_prescaler() (cpu_is_at91sam9x5() \ - || cpu_is_at91sam9n12() \ - || cpu_is_sama5d3()) - -static LIST_HEAD(clocks); -static DEFINE_SPINLOCK(clk_lock); - -static u32 at91_pllb_usb_init; - -/* - * Four primary clock sources: two crystal oscillators (32K, main), and - * two PLLs. PLLA usually runs the master clock; and PLLB must run at - * 48 MHz (unless no USB function clocks are needed). The main clock and - * both PLLs are turned off to run in "slow clock mode" (system suspend). - */ -static struct clk clk32k = { - .name = "clk32k", - .rate_hz = AT91_SLOW_CLOCK, - .users = 1, /* always on */ - .id = 0, - .type = CLK_TYPE_PRIMARY, -}; -static struct clk main_clk = { - .name = "main", - .pmc_mask = AT91_PMC_MOSCS, /* in PMC_SR */ - .id = 1, - .type = CLK_TYPE_PRIMARY, -}; -static struct clk plla = { - .name = "plla", - .parent = &main_clk, - .pmc_mask = AT91_PMC_LOCKA, /* in PMC_SR */ - .id = 2, - .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL, -}; - -static void pllb_mode(struct clk *clk, int is_on) -{ - u32 value; - - if (is_on) { - is_on = AT91_PMC_LOCKB; - value = at91_pllb_usb_init; - } else - value = 0; - - // REVISIT: Add work-around for AT91RM9200 Errata #26 ? - at91_pmc_write(AT91_CKGR_PLLBR, value); - - do { - cpu_relax(); - } while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on); -} - -static struct clk pllb = { - .name = "pllb", - .parent = &main_clk, - .pmc_mask = AT91_PMC_LOCKB, /* in PMC_SR */ - .mode = pllb_mode, - .id = 3, - .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL, -}; - -static void pmc_sys_mode(struct clk *clk, int is_on) -{ - if (is_on) - at91_pmc_write(AT91_PMC_SCER, clk->pmc_mask); - else - at91_pmc_write(AT91_PMC_SCDR, clk->pmc_mask); -} - -static void pmc_uckr_mode(struct clk *clk, int is_on) -{ - unsigned int uckr = at91_pmc_read(AT91_CKGR_UCKR); - - if (is_on) { - is_on = AT91_PMC_LOCKU; - at91_pmc_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask); - } else - at91_pmc_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask)); - - do { - cpu_relax(); - } while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on); -} - -/* USB function clocks (PLLB must be 48 MHz) */ -static struct clk udpck = { - .name = "udpck", - .parent = &pllb, - .mode = pmc_sys_mode, -}; -struct clk utmi_clk = { - .name = "utmi_clk", - .parent = &main_clk, - .pmc_mask = AT91_PMC_UPLLEN, /* in CKGR_UCKR */ - .mode = pmc_uckr_mode, - .type = CLK_TYPE_PLL, -}; -static struct clk uhpck = { - .name = "uhpck", - /*.parent = ... we choose parent at runtime */ - .mode = pmc_sys_mode, -}; - - -/* - * The master clock is divided from the CPU clock (by 1-4). It's used for - * memory, interfaces to on-chip peripherals, the AIC, and sometimes more - * (e.g baud rate generation). It's sourced from one of the primary clocks. - */ -struct clk mck = { - .name = "mck", - .pmc_mask = AT91_PMC_MCKRDY, /* in PMC_SR */ -}; - -static void pmc_periph_mode(struct clk *clk, int is_on) -{ - u32 regval = 0; - - /* - * With sama5d3 devices, we are managing clock division so we have to - * use the Peripheral Control Register introduced from at91sam9x5 - * devices. - */ - if (cpu_is_sama5d3()) { - regval |= AT91_PMC_PCR_CMD; /* write command */ - regval |= clk->pid & AT91_PMC_PCR_PID; /* peripheral selection */ - regval |= AT91_PMC_PCR_DIV(clk->div); - if (is_on) - regval |= AT91_PMC_PCR_EN; /* enable clock */ - at91_pmc_write(AT91_PMC_PCR, regval); - } else { - if (is_on) - at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask); - else - at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask); - } -} - -static struct clk __init *at91_css_to_clk(unsigned long css) -{ - switch (css) { - case AT91_PMC_CSS_SLOW: - return &clk32k; - case AT91_PMC_CSS_MAIN: - return &main_clk; - case AT91_PMC_CSS_PLLA: - return &plla; - case AT91_PMC_CSS_PLLB: - if (cpu_has_upll()) - /* CSS_PLLB == CSS_UPLL */ - return &utmi_clk; - else if (cpu_has_pllb()) - return &pllb; - break; - /* alternate PMC: can use master clock */ - case AT91_PMC_CSS_MASTER: - return &mck; - } - - return NULL; -} - -static int pmc_prescaler_divider(u32 reg) -{ - if (cpu_has_alt_prescaler()) { - return 1 << ((reg & AT91_PMC_ALT_PRES) >> PMC_ALT_PRES_OFFSET); - } else { - return 1 << ((reg & AT91_PMC_PRES) >> PMC_PRES_OFFSET); - } -} - -static void __clk_enable(struct clk *clk) -{ - if (clk->parent) - __clk_enable(clk->parent); - if (clk->users++ == 0 && clk->mode) - clk->mode(clk, 1); -} - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - - spin_lock_irqsave(&clk_lock, flags); - __clk_enable(clk); - spin_unlock_irqrestore(&clk_lock, flags); - return 0; -} -EXPORT_SYMBOL(clk_enable); - -static void __clk_disable(struct clk *clk) -{ - BUG_ON(clk->users == 0); - if (--clk->users == 0 && clk->mode) - clk->mode(clk, 0); - if (clk->parent) - __clk_disable(clk->parent); -} - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - spin_lock_irqsave(&clk_lock, flags); - __clk_disable(clk); - spin_unlock_irqrestore(&clk_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long flags; - unsigned long rate; - - spin_lock_irqsave(&clk_lock, flags); - for (;;) { - rate = clk->rate_hz; - if (rate || !clk->parent) - break; - clk = clk->parent; - } - spin_unlock_irqrestore(&clk_lock, flags); - return rate; -} -EXPORT_SYMBOL(clk_get_rate); - -/*------------------------------------------------------------------------*/ - -/* - * For now, only the programmable clocks support reparenting (MCK could - * do this too, with care) or rate changing (the PLLs could do this too, - * ditto MCK but that's more for cpufreq). Drivers may reparent to get - * a better rate match; we don't. - */ - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - unsigned prescale; - unsigned long actual; - unsigned long prev = ULONG_MAX; - - if (!clk_is_programmable(clk)) - return -EINVAL; - spin_lock_irqsave(&clk_lock, flags); - - actual = clk->parent->rate_hz; - for (prescale = 0; prescale < 7; prescale++) { - if (actual > rate) - prev = actual; - - if (actual && actual <= rate) { - if ((prev - rate) < (rate - actual)) { - actual = prev; - prescale--; - } - break; - } - actual >>= 1; - } - - spin_unlock_irqrestore(&clk_lock, flags); - return (prescale < 7) ? actual : -ENOENT; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - unsigned prescale; - unsigned long prescale_offset, css_mask; - unsigned long actual; - - if (!clk_is_programmable(clk)) - return -EINVAL; - if (clk->users) - return -EBUSY; - - if (cpu_has_alt_prescaler()) { - prescale_offset = PMC_ALT_PRES_OFFSET; - css_mask = AT91_PMC_ALT_PCKR_CSS; - } else { - prescale_offset = PMC_PRES_OFFSET; - css_mask = AT91_PMC_CSS; - } - - spin_lock_irqsave(&clk_lock, flags); - - actual = clk->parent->rate_hz; - for (prescale = 0; prescale < 7; prescale++) { - if (actual && actual <= rate) { - u32 pckr; - - pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id)); - pckr &= css_mask; /* keep clock selection */ - pckr |= prescale << prescale_offset; - at91_pmc_write(AT91_PMC_PCKR(clk->id), pckr); - clk->rate_hz = actual; - break; - } - actual >>= 1; - } - - spin_unlock_irqrestore(&clk_lock, flags); - return (prescale < 7) ? actual : -ENOENT; -} -EXPORT_SYMBOL(clk_set_rate); - -struct clk *clk_get_parent(struct clk *clk) -{ - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - unsigned long flags; - - if (clk->users) - return -EBUSY; - if (!clk_is_primary(parent) || !clk_is_programmable(clk)) - return -EINVAL; - - if (cpu_is_at91sam9rl() && parent->id == AT91_PMC_CSS_PLLB) - return -EINVAL; - - spin_lock_irqsave(&clk_lock, flags); - - clk->rate_hz = parent->rate_hz; - clk->parent = parent; - at91_pmc_write(AT91_PMC_PCKR(clk->id), parent->id); - - spin_unlock_irqrestore(&clk_lock, flags); - return 0; -} -EXPORT_SYMBOL(clk_set_parent); - -/* establish PCK0..PCKN parentage and rate */ -static void __init init_programmable_clock(struct clk *clk) -{ - struct clk *parent; - u32 pckr; - unsigned int css_mask; - - if (cpu_has_alt_prescaler()) - css_mask = AT91_PMC_ALT_PCKR_CSS; - else - css_mask = AT91_PMC_CSS; - - pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id)); - parent = at91_css_to_clk(pckr & css_mask); - clk->parent = parent; - clk->rate_hz = parent->rate_hz / pmc_prescaler_divider(pckr); -} - -/*------------------------------------------------------------------------*/ - -#ifdef CONFIG_DEBUG_FS - -static int at91_clk_show(struct seq_file *s, void *unused) -{ - u32 scsr, pcsr, pcsr1 = 0, uckr = 0, sr; - struct clk *clk; - - scsr = at91_pmc_read(AT91_PMC_SCSR); - pcsr = at91_pmc_read(AT91_PMC_PCSR); - if (cpu_is_sama5d3()) - pcsr1 = at91_pmc_read(AT91_PMC_PCSR1); - sr = at91_pmc_read(AT91_PMC_SR); - seq_printf(s, "SCSR = %8x\n", scsr); - seq_printf(s, "PCSR = %8x\n", pcsr); - if (cpu_is_sama5d3()) - seq_printf(s, "PCSR1 = %8x\n", pcsr1); - seq_printf(s, "MOR = %8x\n", at91_pmc_read(AT91_CKGR_MOR)); - seq_printf(s, "MCFR = %8x\n", at91_pmc_read(AT91_CKGR_MCFR)); - seq_printf(s, "PLLA = %8x\n", at91_pmc_read(AT91_CKGR_PLLAR)); - if (cpu_has_pllb()) - seq_printf(s, "PLLB = %8x\n", at91_pmc_read(AT91_CKGR_PLLBR)); - if (cpu_has_utmi()) { - uckr = at91_pmc_read(AT91_CKGR_UCKR); - seq_printf(s, "UCKR = %8x\n", uckr); - } - seq_printf(s, "MCKR = %8x\n", at91_pmc_read(AT91_PMC_MCKR)); - if (cpu_has_upll() || cpu_is_at91sam9n12()) - seq_printf(s, "USB = %8x\n", at91_pmc_read(AT91_PMC_USB)); - seq_printf(s, "SR = %8x\n", sr); - - seq_printf(s, "\n"); - - list_for_each_entry(clk, &clocks, node) { - char *state; - - if (clk->mode == pmc_sys_mode) { - state = (scsr & clk->pmc_mask) ? "on" : "off"; - } else if (clk->mode == pmc_periph_mode) { - if (cpu_is_sama5d3()) { - u32 pmc_mask = 1 << (clk->pid % 32); - - if (clk->pid > 31) - state = (pcsr1 & pmc_mask) ? "on" : "off"; - else - state = (pcsr & pmc_mask) ? "on" : "off"; - } else { - state = (pcsr & clk->pmc_mask) ? "on" : "off"; - } - } else if (clk->mode == pmc_uckr_mode) { - state = (uckr & clk->pmc_mask) ? "on" : "off"; - } else if (clk->pmc_mask) { - state = (sr & clk->pmc_mask) ? "on" : "off"; - } else if (clk == &clk32k || clk == &main_clk) { - state = "on"; - } else { - state = ""; - } - - seq_printf(s, "%-10s users=%2d %-3s %9lu Hz %s\n", - clk->name, clk->users, state, clk_get_rate(clk), - clk->parent ? clk->parent->name : ""); - } - return 0; -} - -static int at91_clk_open(struct inode *inode, struct file *file) -{ - return single_open(file, at91_clk_show, NULL); -} - -static const struct file_operations at91_clk_operations = { - .open = at91_clk_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init at91_clk_debugfs_init(void) -{ - /* /sys/kernel/debug/at91_clk */ - (void) debugfs_create_file("at91_clk", S_IFREG | S_IRUGO, NULL, NULL, &at91_clk_operations); - - return 0; -} -postcore_initcall(at91_clk_debugfs_init); - -#endif - -/*------------------------------------------------------------------------*/ - -/* Register a new clock */ -static void __init at91_clk_add(struct clk *clk) -{ - list_add_tail(&clk->node, &clocks); - - clk->cl.con_id = clk->name; - clk->cl.clk = clk; - clkdev_add(&clk->cl); -} - -int __init clk_register(struct clk *clk) -{ - if (clk_is_peripheral(clk)) { - if (!clk->parent) - clk->parent = &mck; - if (cpu_is_sama5d3()) - clk->rate_hz = DIV_ROUND_UP(clk->parent->rate_hz, - 1 << clk->div); - clk->mode = pmc_periph_mode; - } - else if (clk_is_sys(clk)) { - clk->parent = &mck; - clk->mode = pmc_sys_mode; - } - else if (clk_is_programmable(clk)) { - clk->mode = pmc_sys_mode; - init_programmable_clock(clk); - } - - at91_clk_add(clk); - - return 0; -} - -/*------------------------------------------------------------------------*/ - -static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg) -{ - unsigned mul, div; - - div = reg & 0xff; - if (cpu_is_sama5d3()) - mul = AT91_PMC3_MUL_GET(reg); - else - mul = AT91_PMC_MUL_GET(reg); - - if (div && mul) { - freq /= div; - freq *= mul + 1; - } else - freq = 0; - - return freq; -} - -static u32 __init at91_usb_rate(struct clk *pll, u32 freq, u32 reg) -{ - if (pll == &pllb && (reg & AT91_PMC_USB96M)) - return freq / 2; - else if (pll == &utmi_clk || cpu_is_at91sam9n12()) - return freq / (1 + ((reg & AT91_PMC_OHCIUSBDIV) >> 8)); - else - return freq; -} - -static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq) -{ - unsigned i, div = 0, mul = 0, diff = 1 << 30; - unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00; - - /* PLL output max 240 MHz (or 180 MHz per errata) */ - if (out_freq > 240000000) - goto fail; - - for (i = 1; i < 256; i++) { - int diff1; - unsigned input, mul1; - - /* - * PLL input between 1MHz and 32MHz per spec, but lower - * frequences seem necessary in some cases so allow 100K. - * Warning: some newer products need 2MHz min. - */ - input = main_freq / i; - if (cpu_is_at91sam9g20() && input < 2000000) - continue; - if (input < 100000) - continue; - if (input > 32000000) - continue; - - mul1 = out_freq / input; - if (cpu_is_at91sam9g20() && mul > 63) - continue; - if (mul1 > 2048) - continue; - if (mul1 < 2) - goto fail; - - diff1 = out_freq - input * mul1; - if (diff1 < 0) - diff1 = -diff1; - if (diff > diff1) { - diff = diff1; - div = i; - mul = mul1; - if (diff == 0) - break; - } - } - if (i == 256 && diff > (out_freq >> 5)) - goto fail; - return ret | ((mul - 1) << 16) | div; -fail: - return 0; -} - -static struct clk *const standard_pmc_clocks[] __initconst = { - /* four primary clocks */ - &clk32k, - &main_clk, - &plla, - - /* MCK */ - &mck -}; - -/* PLLB generated USB full speed clock init */ -static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) -{ - unsigned int reg; - - /* - * USB clock init: choose 48 MHz PLLB value, - * disable 48MHz clock during usb peripheral suspend. - * - * REVISIT: assumes MCK doesn't derive from PLLB! - */ - uhpck.parent = &pllb; - - reg = at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2); - pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init); - if (cpu_is_at91rm9200()) { - reg = at91_pllb_usb_init |= AT91_PMC_USB96M; - uhpck.pmc_mask = AT91RM9200_PMC_UHP; - udpck.pmc_mask = AT91RM9200_PMC_UDP; - at91_pmc_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); - } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || - cpu_is_at91sam9263() || cpu_is_at91sam9g20() || - cpu_is_at91sam9g10()) { - reg = at91_pllb_usb_init |= AT91_PMC_USB96M; - uhpck.pmc_mask = AT91SAM926x_PMC_UHP; - udpck.pmc_mask = AT91SAM926x_PMC_UDP; - } else if (cpu_is_at91sam9n12()) { - /* Divider for USB clock is in USB clock register for 9n12 */ - reg = AT91_PMC_USBS_PLLB; - - /* For PLLB output 96M, set usb divider 2 (USBDIV + 1) */ - reg |= AT91_PMC_OHCIUSBDIV_2; - at91_pmc_write(AT91_PMC_USB, reg); - - /* Still setup masks */ - uhpck.pmc_mask = AT91SAM926x_PMC_UHP; - udpck.pmc_mask = AT91SAM926x_PMC_UDP; - } - at91_pmc_write(AT91_CKGR_PLLBR, 0); - - udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, reg); - uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, reg); -} - -/* UPLL generated USB full speed clock init */ -static void __init at91_upll_usbfs_clock_init(unsigned long main_clock) -{ - /* - * USB clock init: choose 480 MHz from UPLL, - */ - unsigned int usbr = AT91_PMC_USBS_UPLL; - - /* Setup divider by 10 to reach 48 MHz */ - usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV; - - at91_pmc_write(AT91_PMC_USB, usbr); - - /* Now set uhpck values */ - uhpck.parent = &utmi_clk; - uhpck.pmc_mask = AT91SAM926x_PMC_UHP; - uhpck.rate_hz = at91_usb_rate(&utmi_clk, utmi_clk.rate_hz, usbr); -} - -static int __init at91_pmc_init(unsigned long main_clock) -{ - unsigned tmp, freq, mckr; - int i; - int pll_overclock = false; - - /* - * When the bootloader initialized the main oscillator correctly, - * there's no problem using the cycle counter. But if it didn't, - * or when using oscillator bypass mode, we must be told the speed - * of the main clock. - */ - if (!main_clock) { - do { - tmp = at91_pmc_read(AT91_CKGR_MCFR); - } while (!(tmp & AT91_PMC_MAINRDY)); - main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16); - } - main_clk.rate_hz = main_clock; - - /* report if PLLA is more than mildly overclocked */ - plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_pmc_read(AT91_CKGR_PLLAR)); - if (cpu_has_1056M_plla()) { - if (plla.rate_hz > 1056000000) - pll_overclock = true; - } else if (cpu_has_800M_plla()) { - if (plla.rate_hz > 800000000) - pll_overclock = true; - } else if (cpu_has_300M_plla()) { - if (plla.rate_hz > 300000000) - pll_overclock = true; - } else if (cpu_has_240M_plla()) { - if (plla.rate_hz > 240000000) - pll_overclock = true; - } else if (cpu_has_210M_plla()) { - if (plla.rate_hz > 210000000) - pll_overclock = true; - } else { - if (plla.rate_hz > 209000000) - pll_overclock = true; - } - if (pll_overclock) - pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000); - - if (cpu_has_plladiv2()) { - mckr = at91_pmc_read(AT91_PMC_MCKR); - plla.rate_hz /= (1 << ((mckr & AT91_PMC_PLLADIV2) >> 12)); /* plla divisor by 2 */ - } - - if (!cpu_has_pllb() && cpu_has_upll()) { - /* setup UTMI clock as the fourth primary clock - * (instead of pllb) */ - utmi_clk.type |= CLK_TYPE_PRIMARY; - utmi_clk.id = 3; - } - - - /* - * USB HS clock init - */ - if (cpu_has_utmi()) { - /* - * multiplier is hard-wired to 40 - * (obtain the USB High Speed 480 MHz when input is 12 MHz) - */ - utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz; - - /* UTMI bias and PLL are managed at the same time */ - if (cpu_has_upll()) - utmi_clk.pmc_mask |= AT91_PMC_BIASEN; - } - - /* - * USB FS clock init - */ - if (cpu_has_pllb()) - at91_pllb_usbfs_clock_init(main_clock); - if (cpu_has_upll()) - /* assumes that we choose UPLL for USB and not PLLA */ - at91_upll_usbfs_clock_init(main_clock); - - /* - * MCK and CPU derive from one of those primary clocks. - * For now, assume this parentage won't change. - */ - mckr = at91_pmc_read(AT91_PMC_MCKR); - mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS); - freq = mck.parent->rate_hz; - freq /= pmc_prescaler_divider(mckr); /* prescale */ - if (cpu_is_at91rm9200()) { - mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ - } else if (cpu_is_at91sam9g20()) { - mck.rate_hz = (mckr & AT91_PMC_MDIV) ? - freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */ - if (mckr & AT91_PMC_PDIV) - freq /= 2; /* processor clock division */ - } else if (cpu_has_mdiv3()) { - mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ? - freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ - } else { - mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ - } - - if (cpu_has_alt_prescaler()) { - /* Programmable clocks can use MCK */ - mck.type |= CLK_TYPE_PRIMARY; - mck.id = 4; - } - - /* Register the PMC's standard clocks */ - for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++) - at91_clk_add(standard_pmc_clocks[i]); - - if (cpu_has_pllb()) - at91_clk_add(&pllb); - - if (cpu_has_uhp()) - at91_clk_add(&uhpck); - - if (cpu_has_udpfs()) - at91_clk_add(&udpck); - - if (cpu_has_utmi()) - at91_clk_add(&utmi_clk); - - /* MCK and CPU clock are "always on" */ - clk_enable(&mck); - - printk("Clocks: CPU %u MHz, master %u MHz, main %u.%03u MHz\n", - freq / 1000000, (unsigned) mck.rate_hz / 1000000, - (unsigned) main_clock / 1000000, - ((unsigned) main_clock % 1000000) / 1000); - - return 0; -} - -#if defined(CONFIG_OF) -static struct of_device_id pmc_ids[] = { - { .compatible = "atmel,at91rm9200-pmc" }, - { .compatible = "atmel,at91sam9260-pmc" }, - { .compatible = "atmel,at91sam9g45-pmc" }, - { .compatible = "atmel,at91sam9n12-pmc" }, - { .compatible = "atmel,at91sam9x5-pmc" }, - { .compatible = "atmel,sama5d3-pmc" }, - { /*sentinel*/ } -}; - -static struct of_device_id osc_ids[] = { - { .compatible = "atmel,osc" }, - { /*sentinel*/ } -}; - -int __init at91_dt_clock_init(void) -{ - struct device_node *np; - u32 main_clock = 0; - - np = of_find_matching_node(NULL, pmc_ids); - if (!np) - panic("unable to find compatible pmc node in dtb\n"); - - at91_pmc_base = of_iomap(np, 0); - if (!at91_pmc_base) - panic("unable to map pmc cpu registers\n"); - - of_node_put(np); - - /* retrieve the freqency of fixed clocks from device tree */ - np = of_find_matching_node(NULL, osc_ids); - if (np) { - u32 rate; - if (!of_property_read_u32(np, "clock-frequency", &rate)) - main_clock = rate; - } - - of_node_put(np); - - return at91_pmc_init(main_clock); -} -#endif - -int __init at91_clock_init(unsigned long main_clock) -{ - at91_pmc_base = ioremap(AT91_PMC, 256); - if (!at91_pmc_base) - panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC); - - return at91_pmc_init(main_clock); -} - -/* - * Several unused clocks may be active. Turn them off. - */ -static int __init at91_clock_reset(void) -{ - unsigned long pcdr = 0; - unsigned long pcdr1 = 0; - unsigned long scdr = 0; - struct clk *clk; - - list_for_each_entry(clk, &clocks, node) { - if (clk->users > 0) - continue; - - if (clk->mode == pmc_periph_mode) { - if (cpu_is_sama5d3()) { - u32 pmc_mask = 1 << (clk->pid % 32); - - if (clk->pid > 31) - pcdr1 |= pmc_mask; - else - pcdr |= pmc_mask; - } else - pcdr |= clk->pmc_mask; - } - - if (clk->mode == pmc_sys_mode) - scdr |= clk->pmc_mask; - - pr_debug("Clocks: disable unused %s\n", clk->name); - } - - at91_pmc_write(AT91_PMC_SCDR, scdr); - at91_pmc_write(AT91_PMC_PCDR, pcdr); - if (cpu_is_sama5d3()) - at91_pmc_write(AT91_PMC_PCDR1, pcdr1); - - return 0; -} -late_initcall(at91_clock_reset); - -void at91sam9_idle(void) -{ - at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK); - cpu_do_idle(); -} diff --git a/arch/arm/mach-at91/clock.h b/arch/arm/mach-at91/clock.h deleted file mode 100644 index a98a39bbd88..00000000000 --- a/arch/arm/mach-at91/clock.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/arch/arm/mach-at91/clock.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/clkdev.h> - -#define CLK_TYPE_PRIMARY 0x1 -#define CLK_TYPE_PLL 0x2 -#define CLK_TYPE_PROGRAMMABLE 0x4 -#define CLK_TYPE_PERIPHERAL 0x8 -#define CLK_TYPE_SYSTEM 0x10 - - -struct clk { - struct list_head node; - const char *name; /* unique clock name */ - struct clk_lookup cl; - unsigned long rate_hz; - unsigned div; /* parent clock divider */ - struct clk *parent; - unsigned pid; /* peripheral ID */ - u32 pmc_mask; - void (*mode)(struct clk *, int); - unsigned id:3; /* PCK0..4, or 32k/main/a/b */ - unsigned type; /* clock type */ - u16 users; -}; - - -extern int __init clk_register(struct clk *clk); -extern struct clk mck; -extern struct clk utmi_clk; - -#define CLKDEV_CON_ID(_id, _clk) \ - { \ - .con_id = _id, \ - .clk = _clk, \ - } - -#define CLKDEV_CON_DEV_ID(_con_id, _dev_id, _clk) \ - { \ - .con_id = _con_id, \ - .dev_id = _dev_id, \ - .clk = _clk, \ - } diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 81959cf4a13..d53324210ad 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -11,7 +11,6 @@ #ifndef _AT91_GENERIC_H #define _AT91_GENERIC_H -#include <linux/clkdev.h> #include <linux/of.h> #include <linux/reboot.h> @@ -23,71 +22,19 @@ extern void __init at91_init_sram(int bank, unsigned long base, /* Processors */ extern void __init at91rm9200_set_type(int type); -extern void __init at91_initialize(unsigned long main_clock); -extern void __init at91x40_initialize(unsigned long main_clock); extern void __init at91rm9200_dt_initialize(void); extern void __init at91_dt_initialize(void); /* Interrupts */ -extern void __init at91_init_irq_default(void); -extern void __init at91_init_interrupts(unsigned int priority[]); -extern void __init at91x40_init_interrupts(unsigned int priority[]); -extern void __init at91_aic_init(unsigned int priority[], - unsigned int ext_irq_mask); -extern int __init at91_aic_of_init(struct device_node *node, - struct device_node *parent); -extern int __init at91_aic5_of_init(struct device_node *node, - struct device_node *parent); extern void __init at91_sysirq_mask_rtc(u32 rtc_base); extern void __init at91_sysirq_mask_rtt(u32 rtt_base); - /* Devices */ -extern void __init at91_register_devices(void); - /* Timer */ -extern void __init at91_init_time(void); -extern void at91rm9200_ioremap_st(u32 addr); extern void at91rm9200_timer_init(void); -extern void at91sam926x_ioremap_pit(u32 addr); -extern void at91sam926x_pit_init(int irq); -extern void at91x40_timer_init(void); - - /* Clocks */ -#ifdef CONFIG_OLD_CLK_AT91 -extern int __init at91_clock_init(unsigned long main_clock); -extern int __init at91_dt_clock_init(void); -#else -static int inline at91_clock_init(unsigned long main_clock) { return 0; } -static int inline at91_dt_clock_init(void) { return 0; } -#endif -struct device; - - /* Power Management */ -extern void at91_irq_suspend(void); -extern void at91_irq_resume(void); /* idle */ extern void at91sam9_idle(void); /* Matrix */ extern void at91_ioremap_matrix(u32 base_addr); - -/* Ram Controler */ -extern void at91_ioremap_ramc(int id, u32 addr, u32 size); - - /* GPIO */ -#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */ -#define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */ - -struct at91_gpio_bank { - unsigned short id; /* peripheral ID */ - unsigned long regbase; /* offset from system peripheral base */ -}; -extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks); -extern void __init at91_gpio_irq_setup(void); -extern int __init at91_gpio_of_irq_setup(struct device_node *node, - struct device_node *parent); - -extern u32 at91_get_extern_irq(void); - #endif /* _AT91_GENERIC_H */ diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c deleted file mode 100644 index d3f05aaad8b..00000000000 --- a/arch/arm/mach-at91/gpio.c +++ /dev/null @@ -1,982 +0,0 @@ -/* - * linux/arch/arm/mach-at91/gpio.c - * - * Copyright (C) 2005 HP Labs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/clk.h> -#include <linux/errno.h> -#include <linux/device.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/module.h> -#include <linux/io.h> -#include <linux/irqdomain.h> -#include <linux/irqchip/chained_irq.h> -#include <linux/of_address.h> - -#include <mach/hardware.h> -#include <mach/at91_pio.h> - -#include "generic.h" -#include "gpio.h" - -#define MAX_NB_GPIO_PER_BANK 32 - -struct at91_gpio_chip { - struct gpio_chip chip; - struct at91_gpio_chip *next; /* Bank sharing same clock */ - int pioc_hwirq; /* PIO bank interrupt identifier on AIC */ - int pioc_virq; /* PIO bank Linux virtual interrupt */ - int pioc_idx; /* PIO bank index */ - void __iomem *regbase; /* PIO bank virtual address */ - struct clk *clock; /* associated clock */ - struct irq_domain *domain; /* associated irq domain */ -}; - -#define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip) - -static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset); -static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip); -static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val); -static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset); -static int at91_gpiolib_get_direction(struct gpio_chip *chip, unsigned offset); -static int at91_gpiolib_direction_output(struct gpio_chip *chip, - unsigned offset, int val); -static int at91_gpiolib_direction_input(struct gpio_chip *chip, - unsigned offset); -static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset); - -#define AT91_GPIO_CHIP(name) \ - { \ - .chip = { \ - .label = name, \ - .request = at91_gpiolib_request, \ - .get_direction = at91_gpiolib_get_direction, \ - .direction_input = at91_gpiolib_direction_input, \ - .direction_output = at91_gpiolib_direction_output, \ - .get = at91_gpiolib_get, \ - .set = at91_gpiolib_set, \ - .dbg_show = at91_gpiolib_dbg_show, \ - .to_irq = at91_gpiolib_to_irq, \ - .ngpio = MAX_NB_GPIO_PER_BANK, \ - }, \ - } - -static struct at91_gpio_chip gpio_chip[] = { - AT91_GPIO_CHIP("pioA"), - AT91_GPIO_CHIP("pioB"), - AT91_GPIO_CHIP("pioC"), - AT91_GPIO_CHIP("pioD"), - AT91_GPIO_CHIP("pioE"), -}; - -static int gpio_banks; -static unsigned long at91_gpio_caps; - -/* All PIO controllers support PIO3 features */ -#define AT91_GPIO_CAP_PIO3 (1 << 0) - -#define has_pio3() (at91_gpio_caps & AT91_GPIO_CAP_PIO3) - -/*--------------------------------------------------------------------------*/ - -static inline void __iomem *pin_to_controller(unsigned pin) -{ - pin /= MAX_NB_GPIO_PER_BANK; - if (likely(pin < gpio_banks)) - return gpio_chip[pin].regbase; - - return NULL; -} - -static inline unsigned pin_to_mask(unsigned pin) -{ - return 1 << (pin % MAX_NB_GPIO_PER_BANK); -} - - -static char peripheral_function(void __iomem *pio, unsigned mask) -{ - char ret = 'X'; - u8 select; - - if (pio) { - if (has_pio3()) { - select = !!(__raw_readl(pio + PIO_ABCDSR1) & mask); - select |= (!!(__raw_readl(pio + PIO_ABCDSR2) & mask) << 1); - ret = 'A' + select; - } else { - ret = __raw_readl(pio + PIO_ABSR) & mask ? - 'B' : 'A'; - } - } - - return ret; -} - -/*--------------------------------------------------------------------------*/ - -/* Not all hardware capabilities are exposed through these calls; they - * only encapsulate the most common features and modes. (So if you - * want to change signals in groups, do it directly.) - * - * Bootloaders will usually handle some of the pin multiplexing setup. - * The intent is certainly that by the time Linux is fully booted, all - * pins should have been fully initialized. These setup calls should - * only be used by board setup routines, or possibly in driver probe(). - * - * For bootloaders doing all that setup, these calls could be inlined - * as NOPs so Linux won't duplicate any setup code - */ - - -/* - * mux the pin to the "GPIO" peripheral role. - */ -int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio) - return -EINVAL; - __raw_writel(mask, pio + PIO_IDR); - __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); - __raw_writel(mask, pio + PIO_PER); - return 0; -} -EXPORT_SYMBOL(at91_set_GPIO_periph); - - -/* - * mux the pin to the "A" internal peripheral role. - */ -int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio) - return -EINVAL; - - __raw_writel(mask, pio + PIO_IDR); - __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); - if (has_pio3()) { - __raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask, - pio + PIO_ABCDSR1); - __raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask, - pio + PIO_ABCDSR2); - } else { - __raw_writel(mask, pio + PIO_ASR); - } - __raw_writel(mask, pio + PIO_PDR); - return 0; -} -EXPORT_SYMBOL(at91_set_A_periph); - - -/* - * mux the pin to the "B" internal peripheral role. - */ -int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio) - return -EINVAL; - - __raw_writel(mask, pio + PIO_IDR); - __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); - if (has_pio3()) { - __raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask, - pio + PIO_ABCDSR1); - __raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask, - pio + PIO_ABCDSR2); - } else { - __raw_writel(mask, pio + PIO_BSR); - } - __raw_writel(mask, pio + PIO_PDR); - return 0; -} -EXPORT_SYMBOL(at91_set_B_periph); - - -/* - * mux the pin to the "C" internal peripheral role. - */ -int __init_or_module at91_set_C_periph(unsigned pin, int use_pullup) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio || !has_pio3()) - return -EINVAL; - - __raw_writel(mask, pio + PIO_IDR); - __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); - __raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask, pio + PIO_ABCDSR1); - __raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2); - __raw_writel(mask, pio + PIO_PDR); - return 0; -} -EXPORT_SYMBOL(at91_set_C_periph); - - -/* - * mux the pin to the "D" internal peripheral role. - */ -int __init_or_module at91_set_D_periph(unsigned pin, int use_pullup) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio || !has_pio3()) - return -EINVAL; - - __raw_writel(mask, pio + PIO_IDR); - __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); - __raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask, pio + PIO_ABCDSR1); - __raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2); - __raw_writel(mask, pio + PIO_PDR); - return 0; -} -EXPORT_SYMBOL(at91_set_D_periph); - - -/* - * mux the pin to the gpio controller (instead of "A", "B", "C" - * or "D" peripheral), and configure it for an input. - */ -int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio) - return -EINVAL; - - __raw_writel(mask, pio + PIO_IDR); - __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); - __raw_writel(mask, pio + PIO_ODR); - __raw_writel(mask, pio + PIO_PER); - return 0; -} -EXPORT_SYMBOL(at91_set_gpio_input); - - -/* - * mux the pin to the gpio controller (instead of "A", "B", "C" - * or "D" peripheral), and configure it for an output. - */ -int __init_or_module at91_set_gpio_output(unsigned pin, int value) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio) - return -EINVAL; - - __raw_writel(mask, pio + PIO_IDR); - __raw_writel(mask, pio + PIO_PUDR); - __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); - __raw_writel(mask, pio + PIO_OER); - __raw_writel(mask, pio + PIO_PER); - return 0; -} -EXPORT_SYMBOL(at91_set_gpio_output); - - -/* - * enable/disable the glitch filter; mostly used with IRQ handling. - */ -int __init_or_module at91_set_deglitch(unsigned pin, int is_on) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio) - return -EINVAL; - - if (has_pio3() && is_on) - __raw_writel(mask, pio + PIO_IFSCDR); - __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR)); - return 0; -} -EXPORT_SYMBOL(at91_set_deglitch); - -/* - * enable/disable the debounce filter; - */ -int __init_or_module at91_set_debounce(unsigned pin, int is_on, int div) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio || !has_pio3()) - return -EINVAL; - - if (is_on) { - __raw_writel(mask, pio + PIO_IFSCER); - __raw_writel(div & PIO_SCDR_DIV, pio + PIO_SCDR); - __raw_writel(mask, pio + PIO_IFER); - } else { - __raw_writel(mask, pio + PIO_IFDR); - } - return 0; -} -EXPORT_SYMBOL(at91_set_debounce); - -/* - * enable/disable the multi-driver; This is only valid for output and - * allows the output pin to run as an open collector output. - */ -int __init_or_module at91_set_multi_drive(unsigned pin, int is_on) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio) - return -EINVAL; - - __raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR)); - return 0; -} -EXPORT_SYMBOL(at91_set_multi_drive); - -/* - * enable/disable the pull-down. - * If pull-up already enabled while calling the function, we disable it. - */ -int __init_or_module at91_set_pulldown(unsigned pin, int is_on) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio || !has_pio3()) - return -EINVAL; - - /* Disable pull-up anyway */ - __raw_writel(mask, pio + PIO_PUDR); - __raw_writel(mask, pio + (is_on ? PIO_PPDER : PIO_PPDDR)); - return 0; -} -EXPORT_SYMBOL(at91_set_pulldown); - -/* - * disable Schmitt trigger - */ -int __init_or_module at91_disable_schmitt_trig(unsigned pin) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio || !has_pio3()) - return -EINVAL; - - __raw_writel(__raw_readl(pio + PIO_SCHMITT) | mask, pio + PIO_SCHMITT); - return 0; -} -EXPORT_SYMBOL(at91_disable_schmitt_trig); - -/* - * assuming the pin is muxed as a gpio output, set its value. - */ -int at91_set_gpio_value(unsigned pin, int value) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio) - return -EINVAL; - __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); - return 0; -} -EXPORT_SYMBOL(at91_set_gpio_value); - - -/* - * read the pin's value (works even if it's not muxed as a gpio). - */ -int at91_get_gpio_value(unsigned pin) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - u32 pdsr; - - if (!pio) - return -EINVAL; - pdsr = __raw_readl(pio + PIO_PDSR); - return (pdsr & mask) != 0; -} -EXPORT_SYMBOL(at91_get_gpio_value); - -/*--------------------------------------------------------------------------*/ - -#ifdef CONFIG_PM - -static u32 wakeups[MAX_GPIO_BANKS]; -static u32 backups[MAX_GPIO_BANKS]; - -static int gpio_irq_set_wake(struct irq_data *d, unsigned state) -{ - struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); - unsigned mask = 1 << d->hwirq; - unsigned bank = at91_gpio->pioc_idx; - - if (unlikely(bank >= MAX_GPIO_BANKS)) - return -EINVAL; - - if (state) - wakeups[bank] |= mask; - else - wakeups[bank] &= ~mask; - - irq_set_irq_wake(at91_gpio->pioc_virq, state); - - return 0; -} - -void at91_gpio_suspend(void) -{ - int i; - - for (i = 0; i < gpio_banks; i++) { - void __iomem *pio = gpio_chip[i].regbase; - - backups[i] = __raw_readl(pio + PIO_IMR); - __raw_writel(backups[i], pio + PIO_IDR); - __raw_writel(wakeups[i], pio + PIO_IER); - - if (!wakeups[i]) { - clk_unprepare(gpio_chip[i].clock); - clk_disable(gpio_chip[i].clock); - } else { -#ifdef CONFIG_PM_DEBUG - printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]); -#endif - } - } -} - -void at91_gpio_resume(void) -{ - int i; - - for (i = 0; i < gpio_banks; i++) { - void __iomem *pio = gpio_chip[i].regbase; - - if (!wakeups[i]) { - if (clk_prepare(gpio_chip[i].clock) == 0) - clk_enable(gpio_chip[i].clock); - } - - __raw_writel(wakeups[i], pio + PIO_IDR); - __raw_writel(backups[i], pio + PIO_IER); - } -} - -#else -#define gpio_irq_set_wake NULL -#endif - - -/* Several AIC controller irqs are dispatched through this GPIO handler. - * To use any AT91_PIN_* as an externally triggered IRQ, first call - * at91_set_gpio_input() then maybe enable its glitch filter. - * Then just request_irq() with the pin ID; it works like any ARM IRQ - * handler. - * First implementation always triggers on rising and falling edges - * whereas the newer PIO3 can be additionally configured to trigger on - * level, edge with any polarity. - * - * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after - * configuring them with at91_set_a_periph() or at91_set_b_periph(). - * IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering. - */ - -static void gpio_irq_mask(struct irq_data *d) -{ - struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); - void __iomem *pio = at91_gpio->regbase; - unsigned mask = 1 << d->hwirq; - - if (pio) - __raw_writel(mask, pio + PIO_IDR); -} - -static void gpio_irq_unmask(struct irq_data *d) -{ - struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); - void __iomem *pio = at91_gpio->regbase; - unsigned mask = 1 << d->hwirq; - - if (pio) - __raw_writel(mask, pio + PIO_IER); -} - -static int gpio_irq_type(struct irq_data *d, unsigned type) -{ - switch (type) { - case IRQ_TYPE_NONE: - case IRQ_TYPE_EDGE_BOTH: - return 0; - default: - return -EINVAL; - } -} - -/* Alternate irq type for PIO3 support */ -static int alt_gpio_irq_type(struct irq_data *d, unsigned type) -{ - struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); - void __iomem *pio = at91_gpio->regbase; - unsigned mask = 1 << d->hwirq; - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - __raw_writel(mask, pio + PIO_ESR); - __raw_writel(mask, pio + PIO_REHLSR); - break; - case IRQ_TYPE_EDGE_FALLING: - __raw_writel(mask, pio + PIO_ESR); - __raw_writel(mask, pio + PIO_FELLSR); - break; - case IRQ_TYPE_LEVEL_LOW: - __raw_writel(mask, pio + PIO_LSR); - __raw_writel(mask, pio + PIO_FELLSR); - break; - case IRQ_TYPE_LEVEL_HIGH: - __raw_writel(mask, pio + PIO_LSR); - __raw_writel(mask, pio + PIO_REHLSR); - break; - case IRQ_TYPE_EDGE_BOTH: - /* - * disable additional interrupt modes: - * fall back to default behavior - */ - __raw_writel(mask, pio + PIO_AIMDR); - return 0; - case IRQ_TYPE_NONE: - default: - pr_warn("AT91: No type for irq %d\n", gpio_to_irq(d->irq)); - return -EINVAL; - } - - /* enable additional interrupt modes */ - __raw_writel(mask, pio + PIO_AIMER); - - return 0; -} - -static struct irq_chip gpio_irqchip = { - .name = "GPIO", - .irq_disable = gpio_irq_mask, - .irq_mask = gpio_irq_mask, - .irq_unmask = gpio_irq_unmask, - /* .irq_set_type is set dynamically */ - .irq_set_wake = gpio_irq_set_wake, -}; - -static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) -{ - struct irq_chip *chip = irq_desc_get_chip(desc); - struct irq_data *idata = irq_desc_get_irq_data(desc); - struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata); - void __iomem *pio = at91_gpio->regbase; - unsigned long isr; - int n; - - chained_irq_enter(chip, desc); - for (;;) { - /* Reading ISR acks pending (edge triggered) GPIO interrupts. - * When there none are pending, we're finished unless we need - * to process multiple banks (like ID_PIOCDE on sam9263). - */ - isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR); - if (!isr) { - if (!at91_gpio->next) - break; - at91_gpio = at91_gpio->next; - pio = at91_gpio->regbase; - continue; - } - - n = find_first_bit(&isr, BITS_PER_LONG); - while (n < BITS_PER_LONG) { - generic_handle_irq(irq_find_mapping(at91_gpio->domain, n)); - n = find_next_bit(&isr, BITS_PER_LONG, n + 1); - } - } - chained_irq_exit(chip, desc); - /* now it may re-trigger */ -} - -/*--------------------------------------------------------------------------*/ - -#ifdef CONFIG_DEBUG_FS - -static void gpio_printf(struct seq_file *s, void __iomem *pio, unsigned mask) -{ - char *trigger = NULL; - char *polarity = NULL; - - if (__raw_readl(pio + PIO_IMR) & mask) { - if (!has_pio3() || !(__raw_readl(pio + PIO_AIMMR) & mask )) { - trigger = "edge"; - polarity = "both"; - } else { - if (__raw_readl(pio + PIO_ELSR) & mask) { - trigger = "level"; - polarity = __raw_readl(pio + PIO_FRLHSR) & mask ? - "high" : "low"; - } else { - trigger = "edge"; - polarity = __raw_readl(pio + PIO_FRLHSR) & mask ? - "rising" : "falling"; - } - } - seq_printf(s, "IRQ:%s-%s\t", trigger, polarity); - } else { - seq_printf(s, "GPIO:%s\t\t", - __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0"); - } -} - -static int at91_gpio_show(struct seq_file *s, void *unused) -{ - int bank, j; - - /* print heading */ - seq_printf(s, "Pin\t"); - for (bank = 0; bank < gpio_banks; bank++) { - seq_printf(s, "PIO%c\t\t", 'A' + bank); - }; - seq_printf(s, "\n\n"); - - /* print pin status */ - for (j = 0; j < 32; j++) { - seq_printf(s, "%i:\t", j); - - for (bank = 0; bank < gpio_banks; bank++) { - unsigned pin = (32 * bank) + j; - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (__raw_readl(pio + PIO_PSR) & mask) - gpio_printf(s, pio, mask); - else - seq_printf(s, "%c\t\t", - peripheral_function(pio, mask)); - } - - seq_printf(s, "\n"); - } - - return 0; -} - -static int at91_gpio_open(struct inode *inode, struct file *file) -{ - return single_open(file, at91_gpio_show, NULL); -} - -static const struct file_operations at91_gpio_operations = { - .open = at91_gpio_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init at91_gpio_debugfs_init(void) -{ - /* /sys/kernel/debug/at91_gpio */ - (void) debugfs_create_file("at91_gpio", S_IFREG | S_IRUGO, NULL, NULL, &at91_gpio_operations); - return 0; -} -postcore_initcall(at91_gpio_debugfs_init); - -#endif - -/*--------------------------------------------------------------------------*/ - -/* - * This lock class tells lockdep that GPIO irqs are in a different - * category than their parents, so it won't report false recursion. - */ -static struct lock_class_key gpio_lock_class; - -/* - * irqdomain initialization: pile up irqdomains on top of AIC range - */ -static void __init at91_gpio_irqdomain(struct at91_gpio_chip *at91_gpio) -{ - int irq_base; - - irq_base = irq_alloc_descs(-1, 0, at91_gpio->chip.ngpio, 0); - if (irq_base < 0) - panic("at91_gpio.%d: error %d: couldn't allocate IRQ numbers.\n", - at91_gpio->pioc_idx, irq_base); - at91_gpio->domain = irq_domain_add_legacy(NULL, at91_gpio->chip.ngpio, - irq_base, 0, - &irq_domain_simple_ops, NULL); - if (!at91_gpio->domain) - panic("at91_gpio.%d: couldn't allocate irq domain.\n", - at91_gpio->pioc_idx); -} - -/* - * Called from the processor-specific init to enable GPIO interrupt support. - */ -void __init at91_gpio_irq_setup(void) -{ - unsigned pioc; - int gpio_irqnbr = 0; - struct at91_gpio_chip *this, *prev; - - /* Setup proper .irq_set_type function */ - if (has_pio3()) - gpio_irqchip.irq_set_type = alt_gpio_irq_type; - else - gpio_irqchip.irq_set_type = gpio_irq_type; - - for (pioc = 0, this = gpio_chip, prev = NULL; - pioc++ < gpio_banks; - prev = this, this++) { - int offset; - - __raw_writel(~0, this->regbase + PIO_IDR); - - /* setup irq domain for this GPIO controller */ - at91_gpio_irqdomain(this); - - for (offset = 0; offset < this->chip.ngpio; offset++) { - unsigned int virq = irq_find_mapping(this->domain, offset); - irq_set_lockdep_class(virq, &gpio_lock_class); - - /* - * Can use the "simple" and not "edge" handler since it's - * shorter, and the AIC handles interrupts sanely. - */ - irq_set_chip_and_handler(virq, &gpio_irqchip, - handle_simple_irq); - set_irq_flags(virq, IRQF_VALID); - irq_set_chip_data(virq, this); - - gpio_irqnbr++; - } - - /* The toplevel handler handles one bank of GPIOs, except - * on some SoC it can handles up to three... - * We only set up the handler for the first of the list. - */ - if (prev && prev->next == this) - continue; - - this->pioc_virq = irq_create_mapping(NULL, this->pioc_hwirq); - irq_set_chip_data(this->pioc_virq, this); - irq_set_chained_handler(this->pioc_virq, gpio_irq_handler); - } - pr_info("AT91: %d gpio irqs in %d banks\n", gpio_irqnbr, gpio_banks); -} - -/* gpiolib support */ -static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset) -{ - struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); - void __iomem *pio = at91_gpio->regbase; - unsigned mask = 1 << offset; - - __raw_writel(mask, pio + PIO_PER); - return 0; -} - -static int at91_gpiolib_get_direction(struct gpio_chip *chip, unsigned offset) -{ - struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); - void __iomem *pio = at91_gpio->regbase; - unsigned mask = 1 << offset; - u32 osr; - - osr = __raw_readl(pio + PIO_OSR); - return !(osr & mask); -} - -static int at91_gpiolib_direction_input(struct gpio_chip *chip, - unsigned offset) -{ - struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); - void __iomem *pio = at91_gpio->regbase; - unsigned mask = 1 << offset; - - __raw_writel(mask, pio + PIO_ODR); - return 0; -} - -static int at91_gpiolib_direction_output(struct gpio_chip *chip, - unsigned offset, int val) -{ - struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); - void __iomem *pio = at91_gpio->regbase; - unsigned mask = 1 << offset; - - __raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR)); - __raw_writel(mask, pio + PIO_OER); - return 0; -} - -static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset) -{ - struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); - void __iomem *pio = at91_gpio->regbase; - unsigned mask = 1 << offset; - u32 pdsr; - - pdsr = __raw_readl(pio + PIO_PDSR); - return (pdsr & mask) != 0; -} - -static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val) -{ - struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); - void __iomem *pio = at91_gpio->regbase; - unsigned mask = 1 << offset; - - __raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR)); -} - -static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip) -{ - int i; - - for (i = 0; i < chip->ngpio; i++) { - unsigned pin = chip->base + i; - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - const char *gpio_label; - - gpio_label = gpiochip_is_requested(chip, i); - if (gpio_label) { - seq_printf(s, "[%s] GPIO%s%d: ", - gpio_label, chip->label, i); - if (__raw_readl(pio + PIO_PSR) & mask) - seq_printf(s, "[gpio] %s\n", - at91_get_gpio_value(pin) ? - "set" : "clear"); - else - seq_printf(s, "[periph %c]\n", - peripheral_function(pio, mask)); - } - } -} - -static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset) -{ - struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); - int virq; - - if (offset < chip->ngpio) - virq = irq_create_mapping(at91_gpio->domain, offset); - else - virq = -ENXIO; - - dev_dbg(chip->dev, "%s: request IRQ for GPIO %d, return %d\n", - chip->label, offset + chip->base, virq); - return virq; -} - -static int __init at91_gpio_setup_clk(int idx) -{ - struct at91_gpio_chip *at91_gpio = &gpio_chip[idx]; - - /* retreive PIO controller's clock */ - at91_gpio->clock = clk_get_sys(NULL, at91_gpio->chip.label); - if (IS_ERR(at91_gpio->clock)) { - pr_err("at91_gpio.%d, failed to get clock, ignoring.\n", idx); - goto err; - } - - if (clk_prepare(at91_gpio->clock)) - goto clk_prep_err; - - /* enable PIO controller's clock */ - if (clk_enable(at91_gpio->clock)) { - pr_err("at91_gpio.%d, failed to enable clock, ignoring.\n", idx); - goto clk_err; - } - - return 0; - -clk_err: - clk_unprepare(at91_gpio->clock); -clk_prep_err: - clk_put(at91_gpio->clock); -err: - return -EINVAL; -} - -static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq) -{ - struct at91_gpio_chip *at91_gpio = &gpio_chip[idx]; - - at91_gpio->chip.base = idx * MAX_NB_GPIO_PER_BANK; - at91_gpio->pioc_hwirq = pioc_hwirq; - at91_gpio->pioc_idx = idx; - - at91_gpio->regbase = ioremap(regbase, 512); - if (!at91_gpio->regbase) { - pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", idx); - return; - } - - if (at91_gpio_setup_clk(idx)) - goto ioremap_err; - - gpio_banks = max(gpio_banks, idx + 1); - return; - -ioremap_err: - iounmap(at91_gpio->regbase); -} - -/* - * Called from the processor-specific init to enable GPIO pin support. - */ -void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks) -{ - unsigned i; - struct at91_gpio_chip *at91_gpio, *last = NULL; - - BUG_ON(nr_banks > MAX_GPIO_BANKS); - - if (of_have_populated_dt()) - return; - - for (i = 0; i < nr_banks; i++) - at91_gpio_init_one(i, data[i].regbase, data[i].id); - - for (i = 0; i < gpio_banks; i++) { - at91_gpio = &gpio_chip[i]; - - /* - * GPIO controller are grouped on some SoC: - * PIOC, PIOD and PIOE can share the same IRQ line - */ - if (last && last->pioc_hwirq == at91_gpio->pioc_hwirq) - last->next = at91_gpio; - last = at91_gpio; - - gpiochip_add(&at91_gpio->chip); - } -} diff --git a/arch/arm/mach-at91/gpio.h b/arch/arm/mach-at91/gpio.h deleted file mode 100644 index eed465ab0dd..00000000000 --- a/arch/arm/mach-at91/gpio.h +++ /dev/null @@ -1,214 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/gpio.h - * - * Copyright (C) 2005 HP Labs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_AT91RM9200_GPIO_H -#define __ASM_ARCH_AT91RM9200_GPIO_H - -#include <linux/kernel.h> -#include <asm/irq.h> - -#define MAX_GPIO_BANKS 5 -#define NR_BUILTIN_GPIO (MAX_GPIO_BANKS * 32) - -/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */ - -#define AT91_PIN_PA0 (0x00 + 0) -#define AT91_PIN_PA1 (0x00 + 1) -#define AT91_PIN_PA2 (0x00 + 2) -#define AT91_PIN_PA3 (0x00 + 3) -#define AT91_PIN_PA4 (0x00 + 4) -#define AT91_PIN_PA5 (0x00 + 5) -#define AT91_PIN_PA6 (0x00 + 6) -#define AT91_PIN_PA7 (0x00 + 7) -#define AT91_PIN_PA8 (0x00 + 8) -#define AT91_PIN_PA9 (0x00 + 9) -#define AT91_PIN_PA10 (0x00 + 10) -#define AT91_PIN_PA11 (0x00 + 11) -#define AT91_PIN_PA12 (0x00 + 12) -#define AT91_PIN_PA13 (0x00 + 13) -#define AT91_PIN_PA14 (0x00 + 14) -#define AT91_PIN_PA15 (0x00 + 15) -#define AT91_PIN_PA16 (0x00 + 16) -#define AT91_PIN_PA17 (0x00 + 17) -#define AT91_PIN_PA18 (0x00 + 18) -#define AT91_PIN_PA19 (0x00 + 19) -#define AT91_PIN_PA20 (0x00 + 20) -#define AT91_PIN_PA21 (0x00 + 21) -#define AT91_PIN_PA22 (0x00 + 22) -#define AT91_PIN_PA23 (0x00 + 23) -#define AT91_PIN_PA24 (0x00 + 24) -#define AT91_PIN_PA25 (0x00 + 25) -#define AT91_PIN_PA26 (0x00 + 26) -#define AT91_PIN_PA27 (0x00 + 27) -#define AT91_PIN_PA28 (0x00 + 28) -#define AT91_PIN_PA29 (0x00 + 29) -#define AT91_PIN_PA30 (0x00 + 30) -#define AT91_PIN_PA31 (0x00 + 31) - -#define AT91_PIN_PB0 (0x20 + 0) -#define AT91_PIN_PB1 (0x20 + 1) -#define AT91_PIN_PB2 (0x20 + 2) -#define AT91_PIN_PB3 (0x20 + 3) -#define AT91_PIN_PB4 (0x20 + 4) -#define AT91_PIN_PB5 (0x20 + 5) -#define AT91_PIN_PB6 (0x20 + 6) -#define AT91_PIN_PB7 (0x20 + 7) -#define AT91_PIN_PB8 (0x20 + 8) -#define AT91_PIN_PB9 (0x20 + 9) -#define AT91_PIN_PB10 (0x20 + 10) -#define AT91_PIN_PB11 (0x20 + 11) -#define AT91_PIN_PB12 (0x20 + 12) -#define AT91_PIN_PB13 (0x20 + 13) -#define AT91_PIN_PB14 (0x20 + 14) -#define AT91_PIN_PB15 (0x20 + 15) -#define AT91_PIN_PB16 (0x20 + 16) -#define AT91_PIN_PB17 (0x20 + 17) -#define AT91_PIN_PB18 (0x20 + 18) -#define AT91_PIN_PB19 (0x20 + 19) -#define AT91_PIN_PB20 (0x20 + 20) -#define AT91_PIN_PB21 (0x20 + 21) -#define AT91_PIN_PB22 (0x20 + 22) -#define AT91_PIN_PB23 (0x20 + 23) -#define AT91_PIN_PB24 (0x20 + 24) -#define AT91_PIN_PB25 (0x20 + 25) -#define AT91_PIN_PB26 (0x20 + 26) -#define AT91_PIN_PB27 (0x20 + 27) -#define AT91_PIN_PB28 (0x20 + 28) -#define AT91_PIN_PB29 (0x20 + 29) -#define AT91_PIN_PB30 (0x20 + 30) -#define AT91_PIN_PB31 (0x20 + 31) - -#define AT91_PIN_PC0 (0x40 + 0) -#define AT91_PIN_PC1 (0x40 + 1) -#define AT91_PIN_PC2 (0x40 + 2) -#define AT91_PIN_PC3 (0x40 + 3) -#define AT91_PIN_PC4 (0x40 + 4) -#define AT91_PIN_PC5 (0x40 + 5) -#define AT91_PIN_PC6 (0x40 + 6) -#define AT91_PIN_PC7 (0x40 + 7) -#define AT91_PIN_PC8 (0x40 + 8) -#define AT91_PIN_PC9 (0x40 + 9) -#define AT91_PIN_PC10 (0x40 + 10) -#define AT91_PIN_PC11 (0x40 + 11) -#define AT91_PIN_PC12 (0x40 + 12) -#define AT91_PIN_PC13 (0x40 + 13) -#define AT91_PIN_PC14 (0x40 + 14) -#define AT91_PIN_PC15 (0x40 + 15) -#define AT91_PIN_PC16 (0x40 + 16) -#define AT91_PIN_PC17 (0x40 + 17) -#define AT91_PIN_PC18 (0x40 + 18) -#define AT91_PIN_PC19 (0x40 + 19) -#define AT91_PIN_PC20 (0x40 + 20) -#define AT91_PIN_PC21 (0x40 + 21) -#define AT91_PIN_PC22 (0x40 + 22) -#define AT91_PIN_PC23 (0x40 + 23) -#define AT91_PIN_PC24 (0x40 + 24) -#define AT91_PIN_PC25 (0x40 + 25) -#define AT91_PIN_PC26 (0x40 + 26) -#define AT91_PIN_PC27 (0x40 + 27) -#define AT91_PIN_PC28 (0x40 + 28) -#define AT91_PIN_PC29 (0x40 + 29) -#define AT91_PIN_PC30 (0x40 + 30) -#define AT91_PIN_PC31 (0x40 + 31) - -#define AT91_PIN_PD0 (0x60 + 0) -#define AT91_PIN_PD1 (0x60 + 1) -#define AT91_PIN_PD2 (0x60 + 2) -#define AT91_PIN_PD3 (0x60 + 3) -#define AT91_PIN_PD4 (0x60 + 4) -#define AT91_PIN_PD5 (0x60 + 5) -#define AT91_PIN_PD6 (0x60 + 6) -#define AT91_PIN_PD7 (0x60 + 7) -#define AT91_PIN_PD8 (0x60 + 8) -#define AT91_PIN_PD9 (0x60 + 9) -#define AT91_PIN_PD10 (0x60 + 10) -#define AT91_PIN_PD11 (0x60 + 11) -#define AT91_PIN_PD12 (0x60 + 12) -#define AT91_PIN_PD13 (0x60 + 13) -#define AT91_PIN_PD14 (0x60 + 14) -#define AT91_PIN_PD15 (0x60 + 15) -#define AT91_PIN_PD16 (0x60 + 16) -#define AT91_PIN_PD17 (0x60 + 17) -#define AT91_PIN_PD18 (0x60 + 18) -#define AT91_PIN_PD19 (0x60 + 19) -#define AT91_PIN_PD20 (0x60 + 20) -#define AT91_PIN_PD21 (0x60 + 21) -#define AT91_PIN_PD22 (0x60 + 22) -#define AT91_PIN_PD23 (0x60 + 23) -#define AT91_PIN_PD24 (0x60 + 24) -#define AT91_PIN_PD25 (0x60 + 25) -#define AT91_PIN_PD26 (0x60 + 26) -#define AT91_PIN_PD27 (0x60 + 27) -#define AT91_PIN_PD28 (0x60 + 28) -#define AT91_PIN_PD29 (0x60 + 29) -#define AT91_PIN_PD30 (0x60 + 30) -#define AT91_PIN_PD31 (0x60 + 31) - -#define AT91_PIN_PE0 (0x80 + 0) -#define AT91_PIN_PE1 (0x80 + 1) -#define AT91_PIN_PE2 (0x80 + 2) -#define AT91_PIN_PE3 (0x80 + 3) -#define AT91_PIN_PE4 (0x80 + 4) -#define AT91_PIN_PE5 (0x80 + 5) -#define AT91_PIN_PE6 (0x80 + 6) -#define AT91_PIN_PE7 (0x80 + 7) -#define AT91_PIN_PE8 (0x80 + 8) -#define AT91_PIN_PE9 (0x80 + 9) -#define AT91_PIN_PE10 (0x80 + 10) -#define AT91_PIN_PE11 (0x80 + 11) -#define AT91_PIN_PE12 (0x80 + 12) -#define AT91_PIN_PE13 (0x80 + 13) -#define AT91_PIN_PE14 (0x80 + 14) -#define AT91_PIN_PE15 (0x80 + 15) -#define AT91_PIN_PE16 (0x80 + 16) -#define AT91_PIN_PE17 (0x80 + 17) -#define AT91_PIN_PE18 (0x80 + 18) -#define AT91_PIN_PE19 (0x80 + 19) -#define AT91_PIN_PE20 (0x80 + 20) -#define AT91_PIN_PE21 (0x80 + 21) -#define AT91_PIN_PE22 (0x80 + 22) -#define AT91_PIN_PE23 (0x80 + 23) -#define AT91_PIN_PE24 (0x80 + 24) -#define AT91_PIN_PE25 (0x80 + 25) -#define AT91_PIN_PE26 (0x80 + 26) -#define AT91_PIN_PE27 (0x80 + 27) -#define AT91_PIN_PE28 (0x80 + 28) -#define AT91_PIN_PE29 (0x80 + 29) -#define AT91_PIN_PE30 (0x80 + 30) -#define AT91_PIN_PE31 (0x80 + 31) - -#ifndef __ASSEMBLY__ -/* setup setup routines, called from board init or driver probe() */ -extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_C_periph(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_D_periph(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_gpio_output(unsigned pin, int value); -extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on); -extern int __init_or_module at91_set_debounce(unsigned pin, int is_on, int div); -extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on); -extern int __init_or_module at91_set_pulldown(unsigned pin, int is_on); -extern int __init_or_module at91_disable_schmitt_trig(unsigned pin); - -/* callable at any time */ -extern int at91_set_gpio_value(unsigned pin, int value); -extern int at91_get_gpio_value(unsigned pin); - -/* callable only from core power-management code */ -extern void at91_gpio_suspend(void); -extern void at91_gpio_resume(void); - -#endif /* __ASSEMBLY__ */ - -#endif diff --git a/arch/arm/mach-at91/gsia18s.h b/arch/arm/mach-at91/gsia18s.h deleted file mode 100644 index 307c194926f..00000000000 --- a/arch/arm/mach-at91/gsia18s.h +++ /dev/null @@ -1,33 +0,0 @@ -/* Buttons */ -#define GPIO_TRIG_NET_IN AT91_PIN_PB21 -#define GPIO_CARD_UNMOUNT_0 AT91_PIN_PB13 -#define GPIO_CARD_UNMOUNT_1 AT91_PIN_PB12 -#define GPIO_KEY_POWER AT91_PIN_PA25 - -/* PCF8574 0x20 GPIO - U1 on the GS_IA18-CB_V3 board */ -#define GS_IA18_S_PCF_GPIO_BASE0 NR_BUILTIN_GPIO -#define PCF_GPIO_HDC_POWER (GS_IA18_S_PCF_GPIO_BASE0 + 0) -#define PCF_GPIO_WIFI_SETUP (GS_IA18_S_PCF_GPIO_BASE0 + 1) -#define PCF_GPIO_WIFI_ENABLE (GS_IA18_S_PCF_GPIO_BASE0 + 2) -#define PCF_GPIO_WIFI_RESET (GS_IA18_S_PCF_GPIO_BASE0 + 3) -#define PCF_GPIO_ETH_DETECT 4 /* this is a GPI */ -#define PCF_GPIO_GPS_SETUP (GS_IA18_S_PCF_GPIO_BASE0 + 5) -#define PCF_GPIO_GPS_STANDBY (GS_IA18_S_PCF_GPIO_BASE0 + 6) -#define PCF_GPIO_GPS_POWER (GS_IA18_S_PCF_GPIO_BASE0 + 7) - -/* PCF8574 0x22 GPIO - U1 on the GS_2G_OPT1-A_V0 board (Alarm) */ -#define GS_IA18_S_PCF_GPIO_BASE1 (GS_IA18_S_PCF_GPIO_BASE0 + 8) -#define PCF_GPIO_ALARM1 (GS_IA18_S_PCF_GPIO_BASE1 + 0) -#define PCF_GPIO_ALARM2 (GS_IA18_S_PCF_GPIO_BASE1 + 1) -#define PCF_GPIO_ALARM3 (GS_IA18_S_PCF_GPIO_BASE1 + 2) -#define PCF_GPIO_ALARM4 (GS_IA18_S_PCF_GPIO_BASE1 + 3) -/* bits 4, 5, 6 not used */ -#define PCF_GPIO_ALARM_V_RELAY_ON (GS_IA18_S_PCF_GPIO_BASE1 + 7) - -/* PCF8574 0x24 GPIO U1 on the GS_2G-OPT23-A_V0 board (Modem) */ -#define GS_IA18_S_PCF_GPIO_BASE2 (GS_IA18_S_PCF_GPIO_BASE1 + 8) -#define PCF_GPIO_MODEM_POWER (GS_IA18_S_PCF_GPIO_BASE2 + 0) -#define PCF_GPIO_MODEM_RESET (GS_IA18_S_PCF_GPIO_BASE2 + 3) -/* bits 1, 2, 4, 5 not used */ -#define PCF_GPIO_TRX_RESET (GS_IA18_S_PCF_GPIO_BASE2 + 6) -/* bit 7 not used */ diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h index 3b5948566e5..42925e8f78e 100644 --- a/arch/arm/mach-at91/include/mach/at91_dbgu.h +++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h @@ -16,7 +16,6 @@ #ifndef AT91_DBGU_H #define AT91_DBGU_H -#if !defined(CONFIG_ARCH_AT91X40) #define AT91_DBGU_CR (0x00) /* Control Register */ #define AT91_DBGU_MR (0x04) /* Mode Register */ #define AT91_DBGU_IER (0x08) /* Interrupt Enable Register */ @@ -34,8 +33,6 @@ #define AT91_DBGU_FNR (0x48) /* Force NTRST Register [SAM9 only] */ #define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */ -#endif /* AT91_DBGU */ - /* * Some AT91 parts that don't have full DEBUG units still support the ID * and extensions register. diff --git a/arch/arm/mach-at91/include/mach/at91_ramc.h b/arch/arm/mach-at91/include/mach/at91_ramc.h index d8aeb278614..e4492b151fe 100644 --- a/arch/arm/mach-at91/include/mach/at91_ramc.h +++ b/arch/arm/mach-at91/include/mach/at91_ramc.h @@ -25,8 +25,8 @@ extern void __iomem *at91_ramc_base[]; #define AT91_MEMCTRL_SDRAMC 1 #define AT91_MEMCTRL_DDRSDR 2 -#include <mach/at91rm9200_sdramc.h> -#include <mach/at91sam9_ddrsdr.h> -#include <mach/at91sam9_sdramc.h> +#include <soc/at91/at91rm9200_sdramc.h> +#include <soc/at91/at91sam9_ddrsdr.h> +#include <soc/at91/at91sam9_sdramc.h> #endif /* __AT91_RAMC_H__ */ diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h b/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h deleted file mode 100644 index aa047f458f1..00000000000 --- a/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Memory Controllers (SDRAMC only) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91RM9200_SDRAMC_H -#define AT91RM9200_SDRAMC_H - -/* SDRAM Controller registers */ -#define AT91RM9200_SDRAMC_MR 0x90 /* Mode Register */ -#define AT91RM9200_SDRAMC_MODE (0xf << 0) /* Command Mode */ -#define AT91RM9200_SDRAMC_MODE_NORMAL (0 << 0) -#define AT91RM9200_SDRAMC_MODE_NOP (1 << 0) -#define AT91RM9200_SDRAMC_MODE_PRECHARGE (2 << 0) -#define AT91RM9200_SDRAMC_MODE_LMR (3 << 0) -#define AT91RM9200_SDRAMC_MODE_REFRESH (4 << 0) -#define AT91RM9200_SDRAMC_DBW (1 << 4) /* Data Bus Width */ -#define AT91RM9200_SDRAMC_DBW_32 (0 << 4) -#define AT91RM9200_SDRAMC_DBW_16 (1 << 4) - -#define AT91RM9200_SDRAMC_TR 0x94 /* Refresh Timer Register */ -#define AT91RM9200_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */ - -#define AT91RM9200_SDRAMC_CR 0x98 /* Configuration Register */ -#define AT91RM9200_SDRAMC_NC (3 << 0) /* Number of Column Bits */ -#define AT91RM9200_SDRAMC_NC_8 (0 << 0) -#define AT91RM9200_SDRAMC_NC_9 (1 << 0) -#define AT91RM9200_SDRAMC_NC_10 (2 << 0) -#define AT91RM9200_SDRAMC_NC_11 (3 << 0) -#define AT91RM9200_SDRAMC_NR (3 << 2) /* Number of Row Bits */ -#define AT91RM9200_SDRAMC_NR_11 (0 << 2) -#define AT91RM9200_SDRAMC_NR_12 (1 << 2) -#define AT91RM9200_SDRAMC_NR_13 (2 << 2) -#define AT91RM9200_SDRAMC_NB (1 << 4) /* Number of Banks */ -#define AT91RM9200_SDRAMC_NB_2 (0 << 4) -#define AT91RM9200_SDRAMC_NB_4 (1 << 4) -#define AT91RM9200_SDRAMC_CAS (3 << 5) /* CAS Latency */ -#define AT91RM9200_SDRAMC_CAS_2 (2 << 5) -#define AT91RM9200_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */ -#define AT91RM9200_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */ -#define AT91RM9200_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */ -#define AT91RM9200_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */ -#define AT91RM9200_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */ -#define AT91RM9200_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */ - -#define AT91RM9200_SDRAMC_SRR 0x9c /* Self Refresh Register */ -#define AT91RM9200_SDRAMC_LPR 0xa0 /* Low Power Register */ -#define AT91RM9200_SDRAMC_IER 0xa4 /* Interrupt Enable Register */ -#define AT91RM9200_SDRAMC_IDR 0xa8 /* Interrupt Disable Register */ -#define AT91RM9200_SDRAMC_IMR 0xac /* Interrupt Mask Register */ -#define AT91RM9200_SDRAMC_ISR 0xb0 /* Interrupt Status Register */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h deleted file mode 100644 index 0210797abf2..00000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - * Header file for the Atmel DDR/SDR SDRAM Controller - * - * Copyright (C) 2010 Atmel Corporation - * Nicolas Ferre <nicolas.ferre@atmel.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef AT91SAM9_DDRSDR_H -#define AT91SAM9_DDRSDR_H - -#define AT91_DDRSDRC_MR 0x00 /* Mode Register */ -#define AT91_DDRSDRC_MODE (0x7 << 0) /* Command Mode */ -#define AT91_DDRSDRC_MODE_NORMAL 0 -#define AT91_DDRSDRC_MODE_NOP 1 -#define AT91_DDRSDRC_MODE_PRECHARGE 2 -#define AT91_DDRSDRC_MODE_LMR 3 -#define AT91_DDRSDRC_MODE_REFRESH 4 -#define AT91_DDRSDRC_MODE_EXT_LMR 5 -#define AT91_DDRSDRC_MODE_DEEP 6 - -#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */ -#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ - -#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */ -#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ -#define AT91_DDRSDRC_NC_SDR8 (0 << 0) -#define AT91_DDRSDRC_NC_SDR9 (1 << 0) -#define AT91_DDRSDRC_NC_SDR10 (2 << 0) -#define AT91_DDRSDRC_NC_SDR11 (3 << 0) -#define AT91_DDRSDRC_NC_DDR9 (0 << 0) -#define AT91_DDRSDRC_NC_DDR10 (1 << 0) -#define AT91_DDRSDRC_NC_DDR11 (2 << 0) -#define AT91_DDRSDRC_NC_DDR12 (3 << 0) -#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */ -#define AT91_DDRSDRC_NR_11 (0 << 2) -#define AT91_DDRSDRC_NR_12 (1 << 2) -#define AT91_DDRSDRC_NR_13 (2 << 2) -#define AT91_DDRSDRC_NR_14 (3 << 2) -#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */ -#define AT91_DDRSDRC_CAS_2 (2 << 4) -#define AT91_DDRSDRC_CAS_3 (3 << 4) -#define AT91_DDRSDRC_CAS_25 (6 << 4) -#define AT91_DDRSDRC_RST_DLL (1 << 7) /* Reset DLL */ -#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ -#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL [SAM9 Only] */ -#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver [SAM9 Only] */ -#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared [SAM9 Only] */ -#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y [SAM9 Only] */ - -#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */ -#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ -#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ -#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ -#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */ -#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ -#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ -#define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */ -#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay [SAM9 Only] */ -#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ - -#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */ -#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ -#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ -#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ -#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ - -#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register [SAM9 Only] */ -#define AT91_DDRSDRC_TXARD (0xf << 0) /* Exit active power down delay to read command in mode "Fast Exit" */ -#define AT91_DDRSDRC_TXARDS (0xf << 4) /* Exit active power down delay to read command in mode "Slow Exit" */ -#define AT91_DDRSDRC_TRPA (0xf << 8) /* Row Precharge All delay */ -#define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */ - -#define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */ -#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ -#define AT91_DDRSDRC_LPCB_DISABLE 0 -#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 -#define AT91_DDRSDRC_LPCB_POWER_DOWN 2 -#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3 -#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */ -#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */ -#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ -#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */ -#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ -#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12) -#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) -#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) -#define AT91_DDRSDRC_APDE (1 << 16) /* Active power down exit time */ -#define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */ - -#define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */ -#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ -#define AT91_DDRSDRC_MD_SDR 0 -#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 -#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 -#define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */ -#define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */ -#define AT91_DDRSDRC_DBW_32BITS (0 << 4) -#define AT91_DDRSDRC_DBW_16BITS (1 << 4) - -#define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */ -#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ -#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ -#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ -#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ - -#define AT91_DDRSDRC_HS 0x2C /* High Speed Register [SAM9 Only] */ -#define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */ - -#define AT91_DDRSDRC_DELAY(n) (0x30 + (0x4 * (n))) /* Delay I/O Register n */ - -#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register [SAM9 Only] */ -#define AT91_DDRSDRC_WP (1 << 0) /* Write protect enable */ -#define AT91_DDRSDRC_WPKEY (0xffffff << 8) /* Write protect key */ -#define AT91_DDRSDRC_KEY (0x444452 << 8) /* Write protect key = "DDR" */ - -#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register [SAM9 Only] */ -#define AT91_DDRSDRC_WPVS (1 << 0) /* Write protect violation status */ -#define AT91_DDRSDRC_WPVSRC (0xffff << 8) /* Write protect violation source */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h deleted file mode 100644 index 3d085a9a745..00000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9_sdramc.h - * - * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. - * - * SDRAM Controllers (SDRAMC) - System peripherals registers. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9_SDRAMC_H -#define AT91SAM9_SDRAMC_H - -/* SDRAM Controller (SDRAMC) registers */ -#define AT91_SDRAMC_MR 0x00 /* SDRAM Controller Mode Register */ -#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ -#define AT91_SDRAMC_MODE_NORMAL 0 -#define AT91_SDRAMC_MODE_NOP 1 -#define AT91_SDRAMC_MODE_PRECHARGE 2 -#define AT91_SDRAMC_MODE_LMR 3 -#define AT91_SDRAMC_MODE_REFRESH 4 -#define AT91_SDRAMC_MODE_EXT_LMR 5 -#define AT91_SDRAMC_MODE_DEEP 6 - -#define AT91_SDRAMC_TR 0x04 /* SDRAM Controller Refresh Timer Register */ -#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */ - -#define AT91_SDRAMC_CR 0x08 /* SDRAM Controller Configuration Register */ -#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ -#define AT91_SDRAMC_NC_8 (0 << 0) -#define AT91_SDRAMC_NC_9 (1 << 0) -#define AT91_SDRAMC_NC_10 (2 << 0) -#define AT91_SDRAMC_NC_11 (3 << 0) -#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ -#define AT91_SDRAMC_NR_11 (0 << 2) -#define AT91_SDRAMC_NR_12 (1 << 2) -#define AT91_SDRAMC_NR_13 (2 << 2) -#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ -#define AT91_SDRAMC_NB_2 (0 << 4) -#define AT91_SDRAMC_NB_4 (1 << 4) -#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ -#define AT91_SDRAMC_CAS_1 (1 << 5) -#define AT91_SDRAMC_CAS_2 (2 << 5) -#define AT91_SDRAMC_CAS_3 (3 << 5) -#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */ -#define AT91_SDRAMC_DBW_32 (0 << 7) -#define AT91_SDRAMC_DBW_16 (1 << 7) -#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */ -#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */ -#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */ -#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */ -#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */ -#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */ - -#define AT91_SDRAMC_LPR 0x10 /* SDRAM Controller Low Power Register */ -#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */ -#define AT91_SDRAMC_LPCB_DISABLE 0 -#define AT91_SDRAMC_LPCB_SELF_REFRESH 1 -#define AT91_SDRAMC_LPCB_POWER_DOWN 2 -#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3 -#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */ -#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ -#define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */ -#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ -#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12) -#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) -#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12) - -#define AT91_SDRAMC_IER 0x14 /* SDRAM Controller Interrupt Enable Register */ -#define AT91_SDRAMC_IDR 0x18 /* SDRAM Controller Interrupt Disable Register */ -#define AT91_SDRAMC_IMR 0x1C /* SDRAM Controller Interrupt Mask Register */ -#define AT91_SDRAMC_ISR 0x20 /* SDRAM Controller Interrupt Status Register */ -#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */ - -#define AT91_SDRAMC_MDR 0x24 /* SDRAM Memory Device Register */ -#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */ -#define AT91_SDRAMC_MD_SDRAM 0 -#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h deleted file mode 100644 index 38dca2bb027..00000000000 --- a/arch/arm/mach-at91/include/mach/at91x40.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91x40.h - * - * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91X40_H -#define AT91X40_H - -/* - * IRQ list. - */ -#define AT91X40_ID_USART0 2 /* USART port 0 */ -#define AT91X40_ID_USART1 3 /* USART port 1 */ -#define AT91X40_ID_TC0 4 /* Timer/Counter 0 */ -#define AT91X40_ID_TC1 5 /* Timer/Counter 1*/ -#define AT91X40_ID_TC2 6 /* Timer/Counter 2*/ -#define AT91X40_ID_WD 7 /* Watchdog? */ -#define AT91X40_ID_PIOA 8 /* Parallel IO Controller A */ - -#define AT91X40_ID_IRQ0 16 /* External IRQ 0 */ -#define AT91X40_ID_IRQ1 17 /* External IRQ 1 */ -#define AT91X40_ID_IRQ2 18 /* External IRQ 2 */ - -/* - * System Peripherals - */ -#define AT91_BASE_SYS 0xffc00000 - -#define AT91_EBI 0xffe00000 /* External Bus Interface */ -#define AT91_SF 0xfff00000 /* Special Function */ -#define AT91_USART1 0xfffcc000 /* USART 1 */ -#define AT91_USART0 0xfffd0000 /* USART 0 */ -#define AT91_TC 0xfffe0000 /* Timer Counter */ -#define AT91_PIOA 0xffff0000 /* PIO Controller A */ -#define AT91_PS 0xffff4000 /* Power Save */ -#define AT91_WD 0xffff8000 /* Watchdog Timer */ - -/* - * The AT91x40 series doesn't have a debug unit like the other AT91 parts. - * But it does have a chip identify register and extension ID, so define at - * least these here. - */ -#define AT91_DBGU_CIDR (AT91_SF + 0) /* CIDR in PS segment */ -#define AT91_DBGU_EXID (AT91_SF + 4) /* EXID in PS segment */ - -/* - * Support defines for the simple Power Controller module. - */ -#define AT91_PS_CR (AT91_PS + 0) /* PS Control register */ -#define AT91_PS_CR_CPU (1 << 0) /* CPU clock disable bit */ - -#define AT91X40_MASTER_CLOCK 40000000 - -#endif /* AT91X40_H */ diff --git a/arch/arm/mach-at91/include/mach/atmel-mci.h b/arch/arm/mach-at91/include/mach/atmel-mci.h deleted file mode 100644 index 3069e413557..00000000000 --- a/arch/arm/mach-at91/include/mach/atmel-mci.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __MACH_ATMEL_MCI_H -#define __MACH_ATMEL_MCI_H - -#include <linux/platform_data/dma-atmel.h> - -/** - * struct mci_dma_data - DMA data for MCI interface - */ -struct mci_dma_data { - struct at_dma_slave sdata; -}; - -/* accessor macros */ -#define slave_data_ptr(s) (&(s)->sdata) -#define find_slave_dev(s) ((s)->sdata.dma_dev) - -#endif /* __MACH_ATMEL_MCI_H */ diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index b27e9ca6565..61914fb35f5 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -62,7 +62,6 @@ #define ARCH_EXID_SAMA5D43 0x00000003 #define ARCH_EXID_SAMA5D44 0x00000004 -#define ARCH_FAMILY_AT91X92 0x09200000 #define ARCH_FAMILY_AT91SAM9 0x01900000 #define ARCH_FAMILY_AT91SAM9XE 0x02900000 diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index c1379735268..cacbaa52418 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -24,9 +24,6 @@ /* sama5d4 */ #define AT91_BASE_DBGU2 0xfc069000 -#if defined(CONFIG_ARCH_AT91X40) -#include <mach/at91x40.h> -#else #include <mach/at91rm9200.h> #include <mach/at91sam9260.h> #include <mach/at91sam9261.h> @@ -51,8 +48,6 @@ */ #define AT91_BASE_SYS 0xffffc000 -#endif - /* * On sama5d4 there is no system controller, we map some needed peripherals */ @@ -132,13 +127,8 @@ * called as part of the generic suspend/resume path. */ #ifndef __ASSEMBLY__ -#ifdef CONFIG_PINCTRL_AT91 extern void at91_pinctrl_gpio_suspend(void); extern void at91_pinctrl_gpio_resume(void); -#else -static inline void at91_pinctrl_gpio_suspend(void) {} -static inline void at91_pinctrl_gpio_resume(void) {} -#endif #endif #endif diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h index acb2d890ad7..4ebb609369e 100644 --- a/arch/arm/mach-at91/include/mach/uncompress.h +++ b/arch/arm/mach-at91/include/mach/uncompress.h @@ -31,7 +31,6 @@ void __iomem *at91_uart; -#if !defined(CONFIG_ARCH_AT91X40) static const u32 uarts_rm9200[] = { AT91_BASE_DBGU0, AT91RM9200_BASE_US0, @@ -188,12 +187,6 @@ static inline void arch_decomp_setup(void) at91_uart = NULL; } -#else -static inline void arch_decomp_setup(void) -{ - at91_uart = NULL; -} -#endif /* * The following code assumes the serial port has already been diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c deleted file mode 100644 index cdb3ec9efd2..00000000000 --- a/arch/arm/mach-at91/irq.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * linux/arch/arm/mach-at91/irq.c - * - * Copyright (C) 2004 SAN People - * Copyright (C) 2004 ATMEL - * Copyright (C) Rick Bronson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/bitmap.h> -#include <linux/types.h> -#include <linux/irq.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/irqdomain.h> -#include <linux/err.h> -#include <linux/slab.h> - -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/setup.h> - -#include <asm/exception.h> -#include <asm/mach/arch.h> -#include <asm/mach/irq.h> -#include <asm/mach/map.h> - -#include "at91_aic.h" - -void __iomem *at91_aic_base; -static struct irq_domain *at91_aic_domain; -static struct device_node *at91_aic_np; -static unsigned int n_irqs = NR_AIC_IRQS; - -#ifdef CONFIG_PM - -static unsigned long *wakeups; -static unsigned long *backups; - -#define set_backup(bit) set_bit(bit, backups) -#define clear_backup(bit) clear_bit(bit, backups) - -static int at91_aic_pm_init(void) -{ - backups = kzalloc(BITS_TO_LONGS(n_irqs) * sizeof(*backups), GFP_KERNEL); - if (!backups) - return -ENOMEM; - - wakeups = kzalloc(BITS_TO_LONGS(n_irqs) * sizeof(*backups), GFP_KERNEL); - if (!wakeups) { - kfree(backups); - return -ENOMEM; - } - - return 0; -} - -static int at91_aic_set_wake(struct irq_data *d, unsigned value) -{ - if (unlikely(d->hwirq >= n_irqs)) - return -EINVAL; - - if (value) - set_bit(d->hwirq, wakeups); - else - clear_bit(d->hwirq, wakeups); - - return 0; -} - -void at91_irq_suspend(void) -{ - at91_aic_write(AT91_AIC_IDCR, *backups); - at91_aic_write(AT91_AIC_IECR, *wakeups); -} - -void at91_irq_resume(void) -{ - at91_aic_write(AT91_AIC_IDCR, *wakeups); - at91_aic_write(AT91_AIC_IECR, *backups); -} - -#else -static inline int at91_aic_pm_init(void) -{ - return 0; -} - -#define set_backup(bit) -#define clear_backup(bit) -#define at91_aic_set_wake NULL - -#endif /* CONFIG_PM */ - -asmlinkage void __exception_irq_entry -at91_aic_handle_irq(struct pt_regs *regs) -{ - u32 irqnr; - u32 irqstat; - - irqnr = at91_aic_read(AT91_AIC_IVR); - irqstat = at91_aic_read(AT91_AIC_ISR); - - /* - * ISR value is 0 when there is no current interrupt or when there is - * a spurious interrupt - */ - if (!irqstat) - at91_aic_write(AT91_AIC_EOICR, 0); - else - handle_IRQ(irqnr, regs); -} - -static void at91_aic_mask_irq(struct irq_data *d) -{ - /* Disable interrupt on AIC */ - at91_aic_write(AT91_AIC_IDCR, 1 << d->hwirq); - /* Update ISR cache */ - clear_backup(d->hwirq); -} - -static void at91_aic_unmask_irq(struct irq_data *d) -{ - /* Enable interrupt on AIC */ - at91_aic_write(AT91_AIC_IECR, 1 << d->hwirq); - /* Update ISR cache */ - set_backup(d->hwirq); -} - -static void at91_aic_eoi(struct irq_data *d) -{ - /* - * Mark end-of-interrupt on AIC, the controller doesn't care about - * the value written. Moreover it's a write-only register. - */ - at91_aic_write(AT91_AIC_EOICR, 0); -} - -static unsigned long *at91_extern_irq; - -u32 at91_get_extern_irq(void) -{ - if (!at91_extern_irq) - return 0; - return *at91_extern_irq; -} - -#define is_extern_irq(hwirq) test_bit(hwirq, at91_extern_irq) - -static int at91_aic_compute_srctype(struct irq_data *d, unsigned type) -{ - int srctype; - - switch (type) { - case IRQ_TYPE_LEVEL_HIGH: - srctype = AT91_AIC_SRCTYPE_HIGH; - break; - case IRQ_TYPE_EDGE_RISING: - srctype = AT91_AIC_SRCTYPE_RISING; - break; - case IRQ_TYPE_LEVEL_LOW: - if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */ - srctype = AT91_AIC_SRCTYPE_LOW; - else - srctype = -EINVAL; - break; - case IRQ_TYPE_EDGE_FALLING: - if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */ - srctype = AT91_AIC_SRCTYPE_FALLING; - else - srctype = -EINVAL; - break; - default: - srctype = -EINVAL; - } - - return srctype; -} - -static int at91_aic_set_type(struct irq_data *d, unsigned type) -{ - unsigned int smr; - int srctype; - - srctype = at91_aic_compute_srctype(d, type); - if (srctype < 0) - return srctype; - - smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) & ~AT91_AIC_SRCTYPE; - at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype); - - return 0; -} - -static struct irq_chip at91_aic_chip = { - .name = "AIC", - .irq_mask = at91_aic_mask_irq, - .irq_unmask = at91_aic_unmask_irq, - .irq_set_type = at91_aic_set_type, - .irq_set_wake = at91_aic_set_wake, - .irq_eoi = at91_aic_eoi, -}; - -static void __init at91_aic_hw_init(unsigned int spu_vector) -{ - int i; - - /* - * Perform 8 End Of Interrupt Command to make sure AIC - * will not Lock out nIRQ - */ - for (i = 0; i < 8; i++) - at91_aic_write(AT91_AIC_EOICR, 0); - - /* - * Spurious Interrupt ID in Spurious Vector Register. - * When there is no current interrupt, the IRQ Vector Register - * reads the value stored in AIC_SPU - */ - at91_aic_write(AT91_AIC_SPU, spu_vector); - - /* No debugging in AIC: Debug (Protect) Control Register */ - at91_aic_write(AT91_AIC_DCR, 0); - - /* Disable and clear all interrupts initially */ - at91_aic_write(AT91_AIC_IDCR, 0xFFFFFFFF); - at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF); -} - -/* - * Initialize the AIC interrupt controller. - */ -void __init at91_aic_init(unsigned int *priority, unsigned int ext_irq_mask) -{ - unsigned int i; - int irq_base; - - at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs) - * sizeof(*at91_extern_irq), GFP_KERNEL); - - if (at91_aic_pm_init() || at91_extern_irq == NULL) - panic("Unable to allocate bit maps\n"); - - *at91_extern_irq = ext_irq_mask; - - at91_aic_base = ioremap(AT91_AIC, 512); - if (!at91_aic_base) - panic("Unable to ioremap AIC registers\n"); - - /* Add irq domain for AIC */ - irq_base = irq_alloc_descs(-1, 0, n_irqs, 0); - if (irq_base < 0) { - WARN(1, "Cannot allocate irq_descs, assuming pre-allocated\n"); - irq_base = 0; - } - at91_aic_domain = irq_domain_add_legacy(at91_aic_np, n_irqs, - irq_base, 0, - &irq_domain_simple_ops, NULL); - - if (!at91_aic_domain) - panic("Unable to add AIC irq domain\n"); - - irq_set_default_host(at91_aic_domain); - - /* - * The IVR is used by macro get_irqnr_and_base to read and verify. - * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred. - */ - for (i = 0; i < n_irqs; i++) { - /* Put hardware irq number in Source Vector Register: */ - at91_aic_write(AT91_AIC_SVR(i), NR_IRQS_LEGACY + i); - /* Active Low interrupt, with the specified priority */ - at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]); - irq_set_chip_and_handler(NR_IRQS_LEGACY + i, &at91_aic_chip, handle_fasteoi_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } - - at91_aic_hw_init(n_irqs); -} diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c deleted file mode 100644 index eb22e3357e8..00000000000 --- a/arch/arm/mach-at91/leds.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * LED driver for Atmel AT91-based boards. - * - * Copyright (C) SAN People (Pty) Ltd - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. -*/ - -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/platform_device.h> - -#include "board.h" -#include "gpio.h" - - -/* ------------------------------------------------------------------------- */ - -#if defined(CONFIG_NEW_LEDS) - -/* - * New cross-platform LED support. - */ - -static struct gpio_led_platform_data led_data; - -static struct platform_device at91_gpio_leds_device = { - .name = "leds-gpio", - .id = -1, - .dev.platform_data = &led_data, -}; - -void __init at91_gpio_leds(struct gpio_led *leds, int nr) -{ - int i; - - if (!nr) - return; - - for (i = 0; i < nr; i++) - at91_set_gpio_output(leds[i].gpio, leds[i].active_low); - - led_data.leds = leds; - led_data.num_leds = nr; - platform_device_register(&at91_gpio_leds_device); -} - -#else -void __init at91_gpio_leds(struct gpio_led *leds, int nr) {} -#endif - diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 4073ab7f38f..9b15169a1c6 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -29,10 +29,8 @@ #include <mach/cpu.h> #include <mach/hardware.h> -#include "at91_aic.h" #include "generic.h" #include "pm.h" -#include "gpio.h" static void (*at91_pm_standby)(void); @@ -131,23 +129,7 @@ extern u32 at91_slow_clock_sz; static int at91_pm_enter(suspend_state_t state) { - if (of_have_populated_dt()) - at91_pinctrl_gpio_suspend(); - else - at91_gpio_suspend(); - - if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base) { - at91_irq_suspend(); - - pr_debug("AT91: PM - wake mask %08x, pm state %d\n", - /* remember all the always-wake irqs */ - (at91_pmc_read(AT91_PMC_PCSR) - | (1 << AT91_ID_FIQ) - | (1 << AT91_ID_SYS) - | (at91_get_extern_irq())) - & at91_aic_read(AT91_AIC_IMR), - state); - } + at91_pinctrl_gpio_suspend(); switch (state) { /* @@ -212,21 +194,10 @@ static int at91_pm_enter(suspend_state_t state) goto error; } - if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base) - pr_debug("AT91: PM - wakeup %08x\n", - at91_aic_read(AT91_AIC_IPR) & - at91_aic_read(AT91_AIC_IMR)); - error: target_state = PM_SUSPEND_ON; - if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base) - at91_irq_resume(); - - if (of_have_populated_dt()) - at91_pinctrl_gpio_resume(); - else - at91_gpio_resume(); + at91_pinctrl_gpio_resume(); return 0; } diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index c5101dcb4fb..d2c89963af2 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -14,7 +14,6 @@ #include <asm/proc-fns.h> #include <mach/at91_ramc.h> -#include <mach/at91rm9200_sdramc.h> #ifdef CONFIG_PM extern void at91_pm_set_standby(void (*at91_standby)(void)); diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 961079250b8..ce25e85720f 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -42,35 +42,9 @@ void __init at91rm9200_set_type(int type) at91_get_soc_subtype(&at91_soc_initdata)); } -void __init at91_init_irq_default(void) -{ - at91_init_interrupts(at91_boot_soc.default_irq_priority); -} - -void __init at91_init_interrupts(unsigned int *priority) -{ - /* Initialize the AIC interrupt controller */ - if (IS_ENABLED(CONFIG_OLD_IRQ_AT91)) - at91_aic_init(priority, at91_boot_soc.extern_irq); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} - void __iomem *at91_ramc_base[2]; EXPORT_SYMBOL_GPL(at91_ramc_base); -void __init at91_ioremap_ramc(int id, u32 addr, u32 size) -{ - if (id < 0 || id > 1) { - pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id); - BUG(); - } - at91_ramc_base[id] = ioremap(addr, size); - if (!at91_ramc_base[id]) - panic(pr_fmt("Impossible to ioremap ramc.%d 0x%x\n"), id, addr); -} - static struct map_desc sram_desc[2] __initdata; void __init at91_init_sram(int bank, unsigned long base, unsigned int length) @@ -418,7 +392,6 @@ void __init at91_ioremap_matrix(u32 base_addr) panic(pr_fmt("Impossible to ioremap at91_matrix_base\n")); } -#if defined(CONFIG_OF) && !defined(CONFIG_ARCH_AT91X40) static struct of_device_id ramc_ids[] = { { .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby }, { .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby }, @@ -460,13 +433,6 @@ void __init at91rm9200_dt_initialize(void) { at91_dt_ramc(); - /* Init clock subsystem */ - at91_dt_clock_init(); - - /* Register the processor-specific clocks */ - if (at91_boot_soc.register_clocks) - at91_boot_soc.register_clocks(); - at91_boot_soc.init(); } @@ -474,39 +440,6 @@ void __init at91_dt_initialize(void) { at91_dt_ramc(); - /* Init clock subsystem */ - at91_dt_clock_init(); - - /* Register the processor-specific clocks */ - if (at91_boot_soc.register_clocks) - at91_boot_soc.register_clocks(); - if (at91_boot_soc.init) at91_boot_soc.init(); } -#endif - -void __init at91_initialize(unsigned long main_clock) -{ - at91_boot_soc.ioremap_registers(); - - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91_boot_soc.register_clocks(); - - at91_boot_soc.init(); - - pinctrl_provide_dummies(); -} - -void __init at91_register_devices(void) -{ - at91_boot_soc.register_devices(); -} - -void __init at91_init_time(void) -{ - at91_boot_soc.init_time(); -} diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index 9a8fd97a8be..ae6c0b2f114 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -6,14 +6,8 @@ struct at91_init_soc { int builtin; - u32 extern_irq; - unsigned int *default_irq_priority; void (*map_io)(void); - void (*ioremap_registers)(void); - void (*register_clocks)(void); - void (*register_devices)(void); void (*init)(void); - void (*init_time)(void); }; extern struct at91_init_soc at91_boot_soc; diff --git a/arch/arm/mach-at91/stamp9g20.h b/arch/arm/mach-at91/stamp9g20.h deleted file mode 100644 index f62c0abca4b..00000000000 --- a/arch/arm/mach-at91/stamp9g20.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_STAMP9G20_H -#define __MACH_STAMP9G20_H - -void stamp9g20_init_early(void); -void stamp9g20_board_init(void); - -#endif |