diff options
Diffstat (limited to 'arch/arm/mach-at91')
| -rw-r--r-- | arch/arm/mach-at91/Kconfig | 11 | ||||
| -rw-r--r-- | arch/arm/mach-at91/Makefile | 3 | ||||
| -rw-r--r-- | arch/arm/mach-at91/at91sam9g45.c | 11 | ||||
| -rw-r--r-- | arch/arm/mach-at91/board-cam60.c | 6 | ||||
| -rw-r--r-- | arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c | 45 | ||||
| -rw-r--r-- | arch/arm/mach-at91/board-sam9g20ek.c | 45 | ||||
| -rw-r--r-- | arch/arm/mach-at91/board-snapper9260.c | 189 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/at91cap9.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h | 22 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/at91sam9260.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/at91sam9261.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h | 130 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/at91sam9_sdramc.h | 23 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/at91sam9rl.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/board.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/cpu.h | 10 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/gpio.h | 1 | ||||
| -rw-r--r-- | arch/arm/mach-at91/pm.h | 49 | ||||
| -rw-r--r-- | arch/arm/mach-at91/pm_slowclock.S | 74 |
19 files changed, 578 insertions, 51 deletions
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 841eaf8f27e..939bccd7056 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -366,6 +366,17 @@ config MACH_STAMP9G20 endif +if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) +comment "AT91SAM9260/AT91SAM9G20 boards" + +config MACH_SNAPPER_9260 + bool "Bluewater Systems Snapper 9260/9G20 module" + help + Select this if you are using the Bluewater Systems Snapper 9260 or + Snapper 9G20 modules. + <http://www.bluewatersys.com/> +endif + # ---------------------------------------------------------- if ARCH_AT91SAM9G45 diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index c1f821e5822..ca2ac003f41 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -66,6 +66,9 @@ obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o +# AT91SAM9260/AT91SAM9G20 board-specific support +obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o + # AT91SAM9G45 board-specific support obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 85166b7e69a..753c0d31a3d 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -20,6 +20,7 @@ #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> +#include <mach/cpu.h> #include "generic.h" #include "clock.h" @@ -176,6 +177,13 @@ static struct clk mmc1_clk = { .type = CLK_TYPE_PERIPHERAL, }; +/* Video decoder clock - Only for sam9m10/sam9m11 */ +static struct clk vdec_clk = { + .name = "vdec_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_VDEC, + .type = CLK_TYPE_PERIPHERAL, +}; + /* One additional fake clock for ohci */ static struct clk ohci_clk = { .name = "ohci_clk", @@ -239,6 +247,9 @@ static void __init at91sam9g45_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11()) + clk_register(&vdec_clk); + clk_register(&pck0); clk_register(&pck1); } diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 02138af631e..44eb9f76493 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -75,7 +75,7 @@ static struct at91_usbh_data __initdata cam60_usbh_data = { * SPI devices. */ #if defined(CONFIG_MTD_DATAFLASH) -static struct mtd_partition __initdata cam60_spi_partitions[] = { +static struct mtd_partition cam60_spi_partitions[] = { { .name = "BOOT1", .offset = 0, @@ -98,14 +98,14 @@ static struct mtd_partition __initdata cam60_spi_partitions[] = { }, }; -static struct flash_platform_data __initdata cam60_spi_flash_platform_data = { +static struct flash_platform_data cam60_spi_flash_platform_data = { .name = "spi_flash", .parts = cam60_spi_partitions, .nr_parts = ARRAY_SIZE(cam60_spi_partitions) }; #endif -static struct spi_board_info cam60_spi_devices[] = { +static struct spi_board_info cam60_spi_devices[] __initdata = { #if defined(CONFIG_MTD_DATAFLASH) { /* DataFlash chip */ .modalias = "mtd_dataflash", diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c index a4102d72cc9..c49f5c003ee 100644 --- a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c +++ b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c @@ -26,6 +26,9 @@ #include <linux/spi/spi.h> #include <linux/spi/at73c213.h> #include <linux/clk.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/consumer.h> #include <mach/hardware.h> #include <asm/setup.h> @@ -235,6 +238,46 @@ static struct gpio_led ek_leds[] = { } }; +#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) +static struct regulator_consumer_supply ek_audio_consumer_supplies[] = { + REGULATOR_SUPPLY("AVDD", "0-001b"), + REGULATOR_SUPPLY("HPVDD", "0-001b"), + REGULATOR_SUPPLY("DBVDD", "0-001b"), + REGULATOR_SUPPLY("DCVDD", "0-001b"), +}; + +static struct regulator_init_data ek_avdd_reg_init_data = { + .constraints = { + .name = "3V3", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = ek_audio_consumer_supplies, + .num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies), +}; + +static struct fixed_voltage_config ek_vdd_pdata = { + .supply_name = "board-3V3", + .microvolts = 3300000, + .gpio = -EINVAL, + .enabled_at_boot = 0, + .init_data = &ek_avdd_reg_init_data, +}; +static struct platform_device ek_voltage_regulator = { + .name = "reg-fixed-voltage", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &ek_vdd_pdata, + }, +}; +static void __init ek_add_regulators(void) +{ + platform_device_register(&ek_voltage_regulator); +} +#else +static void __init ek_add_regulators(void) {} +#endif + static struct i2c_board_info __initdata ek_i2c_devices[] = { { I2C_BOARD_INFO("24c512", 0x50), @@ -256,6 +299,8 @@ static void __init ek_board_init(void) ek_add_device_nand(); /* Ethernet */ at91_add_device_eth(&ek_macb_data); + /* Regulators */ + ek_add_regulators(); /* MMC */ #if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) at91_add_device_mci(0, &ek_mmc_data); diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index c11fd47aec5..6ea9808b886 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -27,6 +27,9 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/clk.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/consumer.h> #include <mach/hardware.h> #include <asm/setup.h> @@ -269,6 +272,46 @@ static void __init ek_add_device_buttons(void) static void __init ek_add_device_buttons(void) {} #endif +#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) +static struct regulator_consumer_supply ek_audio_consumer_supplies[] = { + REGULATOR_SUPPLY("AVDD", "0-001b"), + REGULATOR_SUPPLY("HPVDD", "0-001b"), + REGULATOR_SUPPLY("DBVDD", "0-001b"), + REGULATOR_SUPPLY("DCVDD", "0-001b"), +}; + +static struct regulator_init_data ek_avdd_reg_init_data = { + .constraints = { + .name = "3V3", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = ek_audio_consumer_supplies, + .num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies), +}; + +static struct fixed_voltage_config ek_vdd_pdata = { + .supply_name = "board-3V3", + .microvolts = 3300000, + .gpio = -EINVAL, + .enabled_at_boot = 0, + .init_data = &ek_avdd_reg_init_data, +}; +static struct platform_device ek_voltage_regulator = { + .name = "reg-fixed-voltage", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &ek_vdd_pdata, + }, +}; +static void __init ek_add_regulators(void) +{ + platform_device_register(&ek_voltage_regulator); +} +#else +static void __init ek_add_regulators(void) {} +#endif + static struct i2c_board_info __initdata ek_i2c_devices[] = { { @@ -294,6 +337,8 @@ static void __init ek_board_init(void) ek_add_device_nand(); /* Ethernet */ at91_add_device_eth(&ek_macb_data); + /* Regulators */ + ek_add_regulators(); /* MMC */ at91_add_device_mmc(0, &ek_mmc_data); /* I2C */ diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c new file mode 100644 index 00000000000..2c08ae4ad3a --- /dev/null +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -0,0 +1,189 @@ +/* + * linux/arch/arm/mach-at91/board-snapper9260.c + * + * Copyright (C) 2010 Bluewater System Ltd + * + * Author: Andre Renaud <andre@bluewatersys.com> + * Author: Ryan Mallon <ryan@bluewatersys.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/i2c/pca953x.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/hardware.h> +#include <mach/board.h> +#include <mach/at91sam9_smc.h> + +#include "sam9_smc.h" +#include "generic.h" + +#define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x)) + +static void __init snapper9260_map_io(void) +{ + at91sam9260_initialize(18432000); + + /* Debug on ttyS0 */ + at91_register_uart(0, 0, 0); + at91_set_serial_console(0); + + at91_register_uart(AT91SAM9260_ID_US0, 1, + ATMEL_UART_CTS | ATMEL_UART_RTS); + at91_register_uart(AT91SAM9260_ID_US1, 2, + ATMEL_UART_CTS | ATMEL_UART_RTS); + at91_register_uart(AT91SAM9260_ID_US2, 3, 0); +} + +static void __init snapper9260_init_irq(void) +{ + at91sam9260_init_interrupts(NULL); +} + +static struct at91_usbh_data __initdata snapper9260_usbh_data = { + .ports = 2, +}; + +static struct at91_udc_data __initdata snapper9260_udc_data = { + .vbus_pin = SNAPPER9260_IO_EXP_GPIO(5), + .vbus_active_low = 1, + .vbus_polled = 1, +}; + +static struct at91_eth_data snapper9260_macb_data = { + .is_rmii = 1, +}; + +static struct mtd_partition __initdata snapper9260_nand_partitions[] = { + { + .name = "Preboot", + .offset = 0, + .size = SZ_128K, + }, + { + .name = "Bootloader", + .offset = MTDPART_OFS_APPEND, + .size = SZ_256K, + }, + { + .name = "Environment", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + }, + { + .name = "Filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition * __init +snapper9260_nand_partition_info(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(snapper9260_nand_partitions); + return snapper9260_nand_partitions; +} + +static struct atmel_nand_data __initdata snapper9260_nand_data = { + .ale = 21, + .cle = 22, + .rdy_pin = AT91_PIN_PC13, + .partition_info = snapper9260_nand_partition_info, + .bus_width_16 = 0, +}; + +static struct sam9_smc_config __initdata snapper9260_nand_smc_config = { + .ncs_read_setup = 0, + .nrd_setup = 0, + .ncs_write_setup = 0, + .nwe_setup = 0, + + .ncs_read_pulse = 5, + .nrd_pulse = 2, + .ncs_write_pulse = 5, + .nwe_pulse = 2, + + .read_cycle = 7, + .write_cycle = 7, + + .mode = (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE), + .tdf_cycles = 1, +}; + +static struct pca953x_platform_data snapper9260_io_expander_data = { + .gpio_base = SNAPPER9260_IO_EXP_GPIO(0), +}; + +static struct i2c_board_info __initdata snapper9260_i2c_devices[] = { + { + /* IO expander */ + I2C_BOARD_INFO("max7312", 0x28), + .platform_data = &snapper9260_io_expander_data, + }, + { + /* Audio codec */ + I2C_BOARD_INFO("tlv320aic23", 0x1a), + }, + { + /* RTC */ + I2C_BOARD_INFO("isl1208", 0x6f), + }, +}; + +static void __init snapper9260_add_device_nand(void) +{ + at91_set_A_periph(AT91_PIN_PC14, 0); + sam9_smc_configure(3, &snapper9260_nand_smc_config); + at91_add_device_nand(&snapper9260_nand_data); +} + +static void __init snapper9260_board_init(void) +{ + at91_add_device_i2c(snapper9260_i2c_devices, + ARRAY_SIZE(snapper9260_i2c_devices)); + at91_add_device_serial(); + at91_add_device_usbh(&snapper9260_usbh_data); + at91_add_device_udc(&snapper9260_udc_data); + at91_add_device_eth(&snapper9260_macb_data); + at91_add_device_ssc(AT91SAM9260_ID_SSC, (ATMEL_SSC_TF | ATMEL_SSC_TK | + ATMEL_SSC_TD | ATMEL_SSC_RD)); + snapper9260_add_device_nand(); +} + +MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = snapper9260_map_io, + .init_irq = snapper9260_init_irq, + .init_machine = snapper9260_board_init, +MACHINE_END + + diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h index d8c1ededaa7..9c6af973748 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -84,7 +84,7 @@ */ #define AT91_ECC (0xffffe200 - AT91_BASE_SYS) #define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS) -#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS) +#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) #define AT91_SMC (0xffffe800 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) #define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h index 1499b1cbffd..976f4a6c335 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h +++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h @@ -15,7 +15,7 @@ #ifndef AT91CAP9_DDRSDR_H #define AT91CAP9_DDRSDR_H -#define AT91_DDRSDRC_MR (AT91_DDRSDRC + 0x00) /* Mode Register */ +#define AT91_DDRSDRC_MR 0x00 /* Mode Register */ #define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */ #define AT91_DDRSDRC_MODE_NORMAL 0 #define AT91_DDRSDRC_MODE_NOP 1 @@ -25,10 +25,10 @@ #define AT91_DDRSDRC_MODE_EXT_LMR 5 #define AT91_DDRSDRC_MODE_DEEP 6 -#define AT91_DDRSDRC_RTR (AT91_DDRSDRC + 0x04) /* Refresh Timer Register */ +#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */ #define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ -#define AT91_DDRSDRC_CR (AT91_DDRSDRC + 0x08) /* Configuration Register */ +#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */ #define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ #define AT91_DDRSDRC_NC_SDR8 (0 << 0) #define AT91_DDRSDRC_NC_SDR9 (1 << 0) @@ -49,7 +49,7 @@ #define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */ #define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ -#define AT91_DDRSDRC_T0PR (AT91_DDRSDRC + 0x0C) /* Timing 0 Register */ +#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */ #define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ #define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ #define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ @@ -59,13 +59,13 @@ #define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ #define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ -#define AT91_DDRSDRC_T1PR (AT91_DDRSDRC + 0x10) /* Timing 1 Register */ +#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */ #define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ #define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ #define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ #define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ -#define AT91_DDRSDRC_LPR (AT91_DDRSDRC + 0x18) /* Low Power Register */ +#define AT91_DDRSDRC_LPR 0x18 /* Low Power Register */ #define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ #define AT91_DDRSDRC_LPCB_DISABLE 0 #define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 @@ -80,14 +80,14 @@ #define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) #define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) -#define AT91_DDRSDRC_MDR (AT91_DDRSDRC + 0x1C) /* Memory Device Register */ +#define AT91_DDRSDRC_MDR 0x1C /* Memory Device Register */ #define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ #define AT91_DDRSDRC_MD_SDR 0 #define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 #define AT91_DDRSDRC_MD_DDR 2 #define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 -#define AT91_DDRSDRC_DLLR (AT91_DDRSDRC + 0x20) /* DLL Information Register */ +#define AT91_DDRSDRC_DLLR 0x20 /* DLL Information Register */ #define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ #define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ #define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ @@ -98,5 +98,11 @@ #define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ #define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ +/* Register access macros */ +#define at91_ramc_read(num, reg) \ + at91_sys_read(AT91_DDRSDRC##num + reg) +#define at91_ramc_write(num, reg, value) \ + at91_sys_write(AT91_DDRSDRC##num + reg, value) + #endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index 43c396b9b4c..4e79036d3b8 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -84,7 +84,7 @@ * System Peripherals (offset from AT91_BASE_SYS) */ #define AT91_ECC (0xffffe800 - AT91_BASE_SYS) -#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) +#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_SMC (0xffffec00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index 87de8be1748..2b561851812 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -68,7 +68,7 @@ /* * System Peripherals (offset from AT91_BASE_SYS) */ -#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) +#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_SMC (0xffffec00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_AIC (0xfffff000 - AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h new file mode 100644 index 00000000000..d27b15ba8eb --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h @@ -0,0 +1,130 @@ +/* + * Header file for the Atmel DDR/SDR SDRAM Controller + * + * Copyright (C) 2010 Atmel Corporation + * Nicolas Ferre <nicolas.ferre@atmel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef AT91SAM9_DDRSDR_H +#define AT91SAM9_DDRSDR_H + +#define AT91_DDRSDRC_MR 0x00 /* Mode Register */ +#define AT91_DDRSDRC_MODE (0x7 << 0) /* Command Mode */ +#define AT91_DDRSDRC_MODE_NORMAL 0 +#define AT91_DDRSDRC_MODE_NOP 1 +#define AT91_DDRSDRC_MODE_PRECHARGE 2 +#define AT91_DDRSDRC_MODE_LMR 3 +#define AT91_DDRSDRC_MODE_REFRESH 4 +#define AT91_DDRSDRC_MODE_EXT_LMR 5 +#define AT91_DDRSDRC_MODE_DEEP 6 + +#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */ +#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ + +#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */ +#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ +#define AT91_DDRSDRC_NC_SDR8 (0 << 0) +#define AT91_DDRSDRC_NC_SDR9 (1 << 0) +#define AT91_DDRSDRC_NC_SDR10 (2 << 0) +#define AT91_DDRSDRC_NC_SDR11 (3 << 0) +#define AT91_DDRSDRC_NC_DDR9 (0 << 0) +#define AT91_DDRSDRC_NC_DDR10 (1 << 0) +#define AT91_DDRSDRC_NC_DDR11 (2 << 0) +#define AT91_DDRSDRC_NC_DDR12 (3 << 0) +#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */ +#define AT91_DDRSDRC_NR_11 (0 << 2) +#define AT91_DDRSDRC_NR_12 (1 << 2) +#define AT91_DDRSDRC_NR_13 (2 << 2) +#define AT91_DDRSDRC_NR_14 (3 << 2) +#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */ +#define AT91_DDRSDRC_CAS_2 (2 << 4) +#define AT91_DDRSDRC_CAS_3 (3 << 4) +#define AT91_DDRSDRC_CAS_25 (6 << 4) +#define AT91_DDRSDRC_RST_DLL (1 << 7) /* Reset DLL */ +#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ +#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL */ +#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver */ +#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared */ +#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y */ + +#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */ +#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ +#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ +#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ +#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */ +#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ +#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ +#define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */ +#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay */ +#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ + +#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */ +#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ +#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ +#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ +#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ + +#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register */ +#define AT91_DDRSDRC_TXARD (0xf << 0) /* Exit active power down delay to read command in mode "Fast Exit" */ +#define AT91_DDRSDRC_TXARDS (0xf << 4) /* Exit active power down delay to read command in mode "Slow Exit" */ +#define AT91_DDRSDRC_TRPA (0xf << 8) /* Row Precharge All delay */ +#define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */ + +#define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */ +#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ +#define AT91_DDRSDRC_LPCB_DISABLE 0 +#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 +#define AT91_DDRSDRC_LPCB_POWER_DOWN 2 +#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3 +#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */ +#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */ +#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ +#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */ +#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ +#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12) +#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) +#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) +#define AT91_DDRSDRC_APDE (1 << 16) /* Active power down exit time */ +#define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */ + +#define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */ +#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ +#define AT91_DDRSDRC_MD_SDR 0 +#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 +#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 +#define AT91_DDRSDRC_MD_DDR2 6 +#define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */ +#define AT91_DDRSDRC_DBW_32BITS (0 << 4) +#define AT91_DDRSDRC_DBW_16BITS (1 << 4) + +#define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */ +#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ +#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ +#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ +#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ + +#define AT91_DDRSDRC_HS 0x2C /* High Speed Register */ +#define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */ + +#define AT91_DDRSDRC_DELAY(n) (0x30 + (0x4 * (n))) /* Delay I/O Register n */ + +#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register */ +#define AT91_DDRSDRC_WP (1 << 0) /* Write protect enable */ +#define AT91_DDRSDRC_WPKEY (0xffffff << 8) /* Write protect key */ +#define AT91_DDRSDRC_KEY (0x444452 << 8) /* Write protect key = "DDR" */ + +#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register */ +#define AT91_DDRSDRC_WPVS (1 << 0) /* Write protect violation status */ +#define AT91_DDRSDRC_WPVSRC (0xffff << 8) /* Write protect violation source */ + +/* Register access macros */ +#define at91_ramc_read(num, reg) \ + at91_sys_read(AT91_DDRSDRC##num + reg) +#define at91_ramc_write(num, reg, value) \ + at91_sys_write(AT91_DDRSDRC##num + reg, value) + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h index b7260389f7c..100f5a59292 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h @@ -17,7 +17,7 @@ #define AT91SAM9_SDRAMC_H /* SDRAM Controller (SDRAMC) registers */ -#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */ +#define AT91_SDRAMC_MR 0x00 /* SDRAM Controller Mode Register */ #define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ #define AT91_SDRAMC_MODE_NORMAL 0 #define AT91_SDRAMC_MODE_NOP 1 @@ -27,10 +27,10 @@ #define AT91_SDRAMC_MODE_EXT_LMR 5 #define AT91_SDRAMC_MODE_DEEP 6 -#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */ +#define AT91_SDRAMC_TR 0x04 /* SDRAM Controller Refresh Timer Register */ #define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */ -#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */ +#define AT91_SDRAMC_CR 0x08 /* SDRAM Controller Configuration Register */ #define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ #define AT91_SDRAMC_NC_8 (0 << 0) #define AT91_SDRAMC_NC_9 (1 << 0) @@ -57,7 +57,7 @@ #define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */ #define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */ -#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */ +#define AT91_SDRAMC_LPR 0x10 /* SDRAM Controller Low Power Register */ #define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */ #define AT91_SDRAMC_LPCB_DISABLE 0 #define AT91_SDRAMC_LPCB_SELF_REFRESH 1 @@ -71,16 +71,21 @@ #define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) #define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12) -#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */ -#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */ -#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */ -#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */ +#define AT91_SDRAMC_IER 0x14 /* SDRAM Controller Interrupt Enable Register */ +#define AT91_SDRAMC_IDR 0x18 /* SDRAM Controller Interrupt Disable Register */ +#define AT91_SDRAMC_IMR 0x1C /* SDRAM Controller Interrupt Mask Register */ +#define AT91_SDRAMC_ISR 0x20 /* SDRAM Controller Interrupt Status Register */ #define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */ -#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */ +#define AT91_SDRAMC_MDR 0x24 /* SDRAM Memory Device Register */ #define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */ #define AT91_SDRAMC_MD_SDRAM 0 #define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 +/* Register access macros */ +#define at91_ramc_read(num, reg) \ + at91_sys_read(AT91_SDRAMC##num + reg) +#define at91_ramc_write(num, reg, value) \ + at91_sys_write(AT91_SDRAMC##num + reg, value) #endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index fc2de6c09c8..87ba8517ad9 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -74,7 +74,7 @@ */ #define AT91_DMA (0xffffe600 - AT91_BASE_SYS) #define AT91_ECC (0xffffe800 - AT91_BASE_SYS) -#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) +#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_SMC (0xffffec00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index df2ed848c9f..58528aa9c8a 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -44,6 +44,8 @@ /* USB Device */ struct at91_udc_data { u8 vbus_pin; /* high == host powering us */ + u8 vbus_active_low; /* vbus polarity */ + u8 vbus_polled; /* Use polling, not interrupt */ u8 pullup_pin; /* active == D+ pulled up */ u8 pullup_active_low; /* true == pullup_pin is active low */ }; diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 833659d1200..3bef931d0b1 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -52,6 +52,7 @@ static inline unsigned long at91_cpu_fully_identify(void) #define ARCH_EXID_AT91SAM9M11 0x00000001 #define ARCH_EXID_AT91SAM9M10 0x00000002 +#define ARCH_EXID_AT91SAM9G46 0x00000003 #define ARCH_EXID_AT91SAM9G45 0x00000004 static inline unsigned long at91_exid_identify(void) @@ -128,9 +129,18 @@ static inline unsigned long at91cap9_rev_identify(void) #ifdef CONFIG_ARCH_AT91SAM9G45 #define cpu_is_at91sam9g45() (at91_cpu_identify() == ARCH_ID_AT91SAM9G45) #define cpu_is_at91sam9g45es() (at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES) +#define cpu_is_at91sam9m10() (cpu_is_at91sam9g45() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9M10)) +#define cpu_is_at91sam9m46() (cpu_is_at91sam9g45() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9G46)) +#define cpu_is_at91sam9m11() (cpu_is_at91sam9g45() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9M11)) #else #define cpu_is_at91sam9g45() (0) #define cpu_is_at91sam9g45es() (0) +#define cpu_is_at91sam9m10() (0) +#define cpu_is_at91sam9g46() (0) +#define cpu_is_at91sam9m11() (0) #endif #ifdef CONFIG_ARCH_AT91CAP9 diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index 04c91e31c9c..bfdd8ab26dc 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -19,6 +19,7 @@ #define PIN_BASE NR_AIC_IRQS #define MAX_GPIO_BANKS 5 +#define NR_BUILTIN_GPIO (PIN_BASE + (MAX_GPIO_BANKS * 32)) /* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */ diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 08322c44df1..8c87d0c1b8f 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -30,14 +30,50 @@ static inline u32 sdram_selfrefresh_enable(void) { u32 saved_lpr, lpr; - saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR); + saved_lpr = at91_ramc_read(0, AT91_DDRSDRC_LPR); lpr = saved_lpr & ~AT91_DDRSDRC_LPCB; - at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); + at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); return saved_lpr; } -#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr) +#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr) + +#elif defined(CONFIG_ARCH_AT91SAM9G45) +#include <mach/at91sam9_ddrsdr.h> + +/* We manage both DDRAM/SDRAM controllers, we need more than one value to + * remember. + */ +static u32 saved_lpr1; + +static inline u32 sdram_selfrefresh_enable(void) +{ + /* Those tow values allow us to delay self-refresh activation + * to the maximum. */ + u32 lpr0, lpr1; + u32 saved_lpr0; + + saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR); + lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB; + lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH; + + saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR); + lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB; + lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH; + + /* self-refresh mode now */ + at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0); + at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1); + + return saved_lpr0; +} + +#define sdram_selfrefresh_disable(saved_lpr0) \ + do { \ + at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); \ + at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); \ + } while (0) #else #include <mach/at91sam9_sdramc.h> @@ -47,7 +83,6 @@ static inline u32 sdram_selfrefresh_enable(void) * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use; * handle those cases both here and in the Suspend-To-RAM support. */ -#define AT91_SDRAMC AT91_SDRAMC0 #warning Assuming EB1 SDRAM controller is *NOT* used #endif @@ -55,13 +90,13 @@ static inline u32 sdram_selfrefresh_enable(void) { u32 saved_lpr, lpr; - saved_lpr = at91_sys_read(AT91_SDRAMC_LPR); + saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR); lpr = saved_lpr & ~AT91_SDRAMC_LPCB; - at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH); + at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH); return saved_lpr; } -#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr) +#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr) #endif diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index 9c5b48e68a7..b6b00a1f612 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -16,10 +16,12 @@ #include <mach/hardware.h> #include <mach/at91_pmc.h> -#ifdef CONFIG_ARCH_AT91RM9200 +#if defined(CONFIG_ARCH_AT91RM9200) #include <mach/at91rm9200_mc.h> #elif defined(CONFIG_ARCH_AT91CAP9) #include <mach/at91cap9_ddrsdr.h> +#elif defined(CONFIG_ARCH_AT91SAM9G45) +#include <mach/at91sam9_ddrsdr.h> #else #include <mach/at91sam9_sdramc.h> #endif @@ -30,7 +32,6 @@ * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use; * handle those cases both here and in the Suspend-To-RAM support. */ -#define AT91_SDRAMC AT91_SDRAMC0 #warning Assuming EB1 SDRAM controller is *NOT* used #endif @@ -113,12 +114,14 @@ ENTRY(at91_slow_clock) /* * Register usage: * R1 = Base address of AT91_PMC - * R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200) + * R2 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS) * R3 = temporary register * R4 = temporary register + * R5 = Base address of second RAM Controller or 0 if not present */ ldr r1, .at91_va_base_pmc ldr r2, .at91_va_base_sdramc + ldr r5, .at91_va_base_ramc1 /* Drain write buffer */ mcr p15, 0, r0, c7, c10, 4 @@ -127,20 +130,33 @@ ENTRY(at91_slow_clock) /* Put SDRAM in self-refresh mode */ mov r3, #1 str r3, [r2, #AT91_SDRAMC_SRR] -#elif defined(CONFIG_ARCH_AT91CAP9) - /* Enable SDRAM self-refresh mode */ - ldr r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC] - str r3, .saved_sam9_lpr +#elif defined(CONFIG_ARCH_AT91CAP9) \ + || defined(CONFIG_ARCH_AT91SAM9G45) - mov r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH - str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC] + /* prepare for DDRAM self-refresh mode */ + ldr r3, [r2, #AT91_DDRSDRC_LPR] + str r3, .saved_sam9_lpr + bic r3, #AT91_DDRSDRC_LPCB + orr r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH + + /* figure out if we use the second ram controller */ + cmp r5, #0 + ldrne r4, [r5, #AT91_DDRSDRC_LPR] + strne r4, .saved_sam9_lpr1 + bicne r4, #AT91_DDRSDRC_LPCB + orrne r4, #AT91_DDRSDRC_LPCB_SELF_REFRESH + + /* Enable DDRAM self-refresh mode */ + str r3, [r2, #AT91_DDRSDRC_LPR] + strne r4, [r5, #AT91_DDRSDRC_LPR] #else /* Enable SDRAM self-refresh mode */ - ldr r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC] + ldr r3, [r2, #AT91_SDRAMC_LPR] str r3, .saved_sam9_lpr - mov r3, #AT91_SDRAMC_LPCB_SELF_REFRESH - str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC] + bic r3, #AT91_SDRAMC_LPCB + orr r3, #AT91_SDRAMC_LPCB_SELF_REFRESH + str r3, [r2, #AT91_SDRAMC_LPR] #endif /* Save Master clock setting */ @@ -247,14 +263,21 @@ ENTRY(at91_slow_clock) #ifdef CONFIG_ARCH_AT91RM9200 /* Do nothing - self-refresh is automatically disabled. */ -#elif defined(CONFIG_ARCH_AT91CAP9) - /* Restore LPR on AT91CAP9 */ +#elif defined(CONFIG_ARCH_AT91CAP9) \ + || defined(CONFIG_ARCH_AT91SAM9G45) + /* Restore LPR on AT91 with DDRAM */ ldr r3, .saved_sam9_lpr - str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC] + str r3, [r2, #AT91_DDRSDRC_LPR] + + /* if we use the second ram controller */ + cmp r5, #0 + ldrne r4, .saved_sam9_lpr1 + strne r4, [r5, #AT91_DDRSDRC_LPR] + #else - /* Restore LPR on AT91SAM9 */ + /* Restore LPR on AT91 with SDRAM */ ldr r3, .saved_sam9_lpr - str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC] + str r3, [r2, #AT91_SDRAMC_LPR] #endif /* Restore registers, and return */ @@ -273,18 +296,29 @@ ENTRY(at91_slow_clock) .saved_sam9_lpr: .word 0 +.saved_sam9_lpr1: + .word 0 + .at91_va_base_pmc: .word AT91_VA_BASE_SYS + AT91_PMC #ifdef CONFIG_ARCH_AT91RM9200 .at91_va_base_sdramc: .word AT91_VA_BASE_SYS -#elif defined(CONFIG_ARCH_AT91CAP9) +#elif defined(CONFIG_ARCH_AT91CAP9) \ + || defined(CONFIG_ARCH_AT91SAM9G45) .at91_va_base_sdramc: - .word AT91_VA_BASE_SYS + AT91_DDRSDRC + .word AT91_VA_BASE_SYS + AT91_DDRSDRC0 #else .at91_va_base_sdramc: - .word AT91_VA_BASE_SYS + AT91_SDRAMC + .word AT91_VA_BASE_SYS + AT91_SDRAMC0 +#endif + +.at91_va_base_ramc1: +#if defined(CONFIG_ARCH_AT91SAM9G45) + .word AT91_VA_BASE_SYS + AT91_DDRSDRC1 +#else + .word 0 #endif ENTRY(at91_slow_clock_sz) |