diff options
Diffstat (limited to 'arch/arm/mach-at91')
55 files changed, 537 insertions, 777 deletions
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index c8050b14e61..b1420710193 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -19,8 +19,8 @@ config AT91_SAM9G45_RESET config SOC_AT91SAM9 bool - select GENERIC_CLOCKEVENTS select CPU_ARM926T + select GENERIC_CLOCKEVENTS menu "Atmel AT91 System-on-Chip" @@ -28,66 +28,66 @@ comment "Atmel AT91 Processor" config SOC_AT91SAM9 bool + select AT91_SAM9_SMC + select AT91_SAM9_TIME select CPU_ARM926T select MULTI_IRQ_HANDLER select SPARSE_IRQ - select AT91_SAM9_TIME - select AT91_SAM9_SMC config SOC_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T - select MULTI_IRQ_HANDLER - select SPARSE_IRQ select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 + select MULTI_IRQ_HANDLER + select SPARSE_IRQ config SOC_AT91SAM9260 bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20" - select SOC_AT91SAM9 select HAVE_AT91_DBGU0 select HAVE_NET_MACB + select SOC_AT91SAM9 help Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE or AT91SAM9G20 SoC. config SOC_AT91SAM9261 bool "AT91SAM9261 or AT91SAM9G10" - select SOC_AT91SAM9 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL + select SOC_AT91SAM9 help Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC. config SOC_AT91SAM9263 bool "AT91SAM9263" - select SOC_AT91SAM9 select HAVE_AT91_DBGU1 select HAVE_FB_ATMEL select HAVE_NET_MACB + select SOC_AT91SAM9 config SOC_AT91SAM9RL bool "AT91SAM9RL" - select SOC_AT91SAM9 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL + select SOC_AT91SAM9 config SOC_AT91SAM9G45 bool "AT91SAM9G45 or AT91SAM9M10 families" - select SOC_AT91SAM9 select HAVE_AT91_DBGU1 select HAVE_FB_ATMEL select HAVE_NET_MACB + select SOC_AT91SAM9 help Select this if you are using one of Atmel's AT91SAM9G45 family SoC. This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11. config SOC_AT91SAM9X5 bool "AT91SAM9x5 family" - select SOC_AT91SAM9 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select HAVE_NET_MACB + select SOC_AT91SAM9 help Select this if you are using one of Atmel's AT91SAM9x5 family SoC. This means that your SAM9 name finishes with a '5' (except if it is @@ -97,9 +97,9 @@ config SOC_AT91SAM9X5 config SOC_AT91SAM9N12 bool "AT91SAM9N12 family" - select SOC_AT91SAM9 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL + select SOC_AT91SAM9 help Select this if you are using Atmel's AT91SAM9N12 SoC. @@ -144,9 +144,9 @@ config ARCH_AT91SAM9G45 config ARCH_AT91X40 bool "AT91x40" depends on !MMU + select ARCH_USES_GETTIMEOFFSET select MULTI_IRQ_HANDLER select SPARSE_IRQ - select ARCH_USES_GETTIMEOFFSET endchoice diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index 30bb7332e30..5309f9b6aab 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -12,27 +12,3 @@ else params_phys-y := 0x20000100 initrd_phys-y := 0x20410000 endif - -# Keep dtb files sorted alphabetically for each SoC -# sam9260 -dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += evk-pro3.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb -# sam9263 -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9263ek.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9263.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9263.dtb -# sam9g20 -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek_2mmc.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += kizbox.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9g20.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb -# sam9g45 -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb -# sam9n12 -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9n12ek.dtb -# sam9x5 -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g25ek.dtb diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 6f50c672227..b4f0565aff6 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -187,6 +187,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 01fb7325fec..a563189cdfc 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -294,9 +294,9 @@ void __init at91_add_device_cf(struct at91_cf_data *data) {} * MMC / SD * -------------------------------------------------------------------- */ -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc_data; +static struct mci_platform_data mmc_data; static struct resource mmc_resources[] = { [0] = { @@ -312,7 +312,7 @@ static struct resource mmc_resources[] = { }; static struct platform_device at91rm9200_mmc_device = { - .name = "at91_mci", + .name = "atmel_mci", .id = -1, .dev = { .dma_mask = &mmc_dmamask, @@ -323,53 +323,69 @@ static struct platform_device at91rm9200_mmc_device = { .num_resources = ARRAY_SIZE(mmc_resources), }; -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) { + unsigned int i; + unsigned int slot_count = 0; + if (!data) return; - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); - - /* CLK */ - at91_set_A_periph(AT91_PIN_PA27, 0); + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { - if (data->slot_b) { - /* CMD */ - at91_set_B_periph(AT91_PIN_PA8, 1); + if (!data->slot[i].bus_width) + continue; - /* DAT0, maybe DAT1..DAT3 */ - at91_set_B_periph(AT91_PIN_PA9, 1); - if (data->wire4) { - at91_set_B_periph(AT91_PIN_PA10, 1); - at91_set_B_periph(AT91_PIN_PA11, 1); - at91_set_B_periph(AT91_PIN_PA12, 1); + /* input/irq */ + if (gpio_is_valid(data->slot[i].detect_pin)) { + at91_set_gpio_input(data->slot[i].detect_pin, 1); + at91_set_deglitch(data->slot[i].detect_pin, 1); } - } else { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA28, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA29, 1); - if (data->wire4) { - at91_set_B_periph(AT91_PIN_PB3, 1); - at91_set_B_periph(AT91_PIN_PB4, 1); - at91_set_B_periph(AT91_PIN_PB5, 1); + if (gpio_is_valid(data->slot[i].wp_pin)) + at91_set_gpio_input(data->slot[i].wp_pin, 1); + + switch (i) { + case 0: /* slot A */ + /* CMD */ + at91_set_A_periph(AT91_PIN_PA28, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA29, 1); + if (data->slot[i].bus_width == 4) { + at91_set_B_periph(AT91_PIN_PB3, 1); + at91_set_B_periph(AT91_PIN_PB4, 1); + at91_set_B_periph(AT91_PIN_PB5, 1); + } + slot_count++; + break; + case 1: /* slot B */ + /* CMD */ + at91_set_B_periph(AT91_PIN_PA8, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_B_periph(AT91_PIN_PA9, 1); + if (data->slot[i].bus_width == 4) { + at91_set_B_periph(AT91_PIN_PA10, 1); + at91_set_B_periph(AT91_PIN_PA11, 1); + at91_set_B_periph(AT91_PIN_PA12, 1); + } + slot_count++; + break; + default: + printk(KERN_ERR + "AT91: SD/MMC slot %d not available\n", i); + break; + } + if (slot_count) { + /* CLK */ + at91_set_A_periph(AT91_PIN_PA27, 0); + + mmc_data = *data; + platform_device_register(&at91rm9200_mmc_device); } } - mmc_data = *data; - platform_device_register(&at91rm9200_mmc_device); } #else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} #endif @@ -495,7 +511,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91rm9200_twi_device = { - .name = "at91_i2c", + .name = "i2c-at91rm9200", .id = -1, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 30c7f26a466..ad29f93f20c 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -211,6 +211,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20", &twi_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), @@ -219,6 +221,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk), CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk), CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk), + CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk), /* more tc lookup table for DT entries */ CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index bce572a530e..a76b8684f52 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -209,92 +209,10 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {} /* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc_data; - -static struct resource mmc_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_MCI, - .end = AT91SAM9260_BASE_MCI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_mmc_device = { - .name = "at91_mci", - .id = -1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc_data, - }, - .resource = mmc_resources, - .num_resources = ARRAY_SIZE(mmc_resources), -}; - -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) -{ - if (!data) - return; - - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); - - /* CLK */ - at91_set_A_periph(AT91_PIN_PA8, 0); - - if (data->slot_b) { - /* CMD */ - at91_set_B_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_B_periph(AT91_PIN_PA0, 1); - if (data->wire4) { - at91_set_B_periph(AT91_PIN_PA5, 1); - at91_set_B_periph(AT91_PIN_PA4, 1); - at91_set_B_periph(AT91_PIN_PA3, 1); - } - } else { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA7, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA6, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA9, 1); - at91_set_A_periph(AT91_PIN_PA10, 1); - at91_set_A_periph(AT91_PIN_PA11, 1); - } - } - - mmc_data = *data; - platform_device_register(&at91sam9260_mmc_device); -} -#else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} -#endif - -/* -------------------------------------------------------------------- * MMC / SD Slot for Atmel MCI Driver * -------------------------------------------------------------------- */ -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) static u64 mmc_dmamask = DMA_BIT_MASK(32); static struct mci_platform_data mmc_data; @@ -503,7 +421,6 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9260_twi_device = { - .name = "at91_i2c", .id = -1, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), @@ -511,6 +428,13 @@ static struct platform_device at91sam9260_twi_device = { void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) { + /* IP version is not the same on 9260 and g20 */ + if (cpu_is_at91sam9g20()) { + at91sam9260_twi_device.name = "i2c-at91sam9g20"; + } else { + at91sam9260_twi_device.name = "i2c-at91sam9260"; + } + /* pins used for TWI interface */ at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */ at91_set_multi_drive(AT91_PIN_PA23, 1); diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index f40762c5fed..8d999eb1a13 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -178,6 +178,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10", &twi_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index bc2590d712d..9752f17efba 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -137,9 +137,9 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} * MMC / SD * -------------------------------------------------------------------- */ -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc_data; +static struct mci_platform_data mmc_data; static struct resource mmc_resources[] = { [0] = { @@ -155,7 +155,7 @@ static struct resource mmc_resources[] = { }; static struct platform_device at91sam9261_mmc_device = { - .name = "at91_mci", + .name = "atmel_mci", .id = -1, .dev = { .dma_mask = &mmc_dmamask, @@ -166,40 +166,40 @@ static struct platform_device at91sam9261_mmc_device = { .num_resources = ARRAY_SIZE(mmc_resources), }; -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) { if (!data) return; - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); - - /* CLK */ - at91_set_B_periph(AT91_PIN_PA2, 0); - - /* CMD */ - at91_set_B_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_B_periph(AT91_PIN_PA0, 1); - if (data->wire4) { - at91_set_B_periph(AT91_PIN_PA4, 1); - at91_set_B_periph(AT91_PIN_PA5, 1); - at91_set_B_periph(AT91_PIN_PA6, 1); - } + if (data->slot[0].bus_width) { + /* input/irq */ + if (gpio_is_valid(data->slot[0].detect_pin)) { + at91_set_gpio_input(data->slot[0].detect_pin, 1); + at91_set_deglitch(data->slot[0].detect_pin, 1); + } + if (gpio_is_valid(data->slot[0].wp_pin)) + at91_set_gpio_input(data->slot[0].wp_pin, 1); + + /* CLK */ + at91_set_B_periph(AT91_PIN_PA2, 0); + + /* CMD */ + at91_set_B_periph(AT91_PIN_PA1, 1); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_B_periph(AT91_PIN_PA0, 1); + if (data->slot[0].bus_width == 4) { + at91_set_B_periph(AT91_PIN_PA4, 1); + at91_set_B_periph(AT91_PIN_PA5, 1); + at91_set_B_periph(AT91_PIN_PA6, 1); + } - mmc_data = *data; - platform_device_register(&at91sam9261_mmc_device); + mmc_data = *data; + platform_device_register(&at91sam9261_mmc_device); + } } #else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} #endif @@ -317,7 +317,6 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9261_twi_device = { - .name = "at91_i2c", .id = -1, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), @@ -325,12 +324,19 @@ static struct platform_device at91sam9261_twi_device = { void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) { + /* IP version is not the same on 9261 and g10 */ + if (cpu_is_at91sam9g10()) { + at91sam9261_twi_device.name = "i2c-at91sam9g10"; + /* I2C PIO must not be configured as open-drain on this chip */ + } else { + at91sam9261_twi_device.name = "i2c-at91sam9261"; + at91_set_multi_drive(AT91_PIN_PA7, 1); + at91_set_multi_drive(AT91_PIN_PA8, 1); + } + /* pins used for TWI interface */ at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PA7, 1); - at91_set_A_periph(AT91_PIN_PA8, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PA8, 1); i2c_register_board_info(0, devices, nr_devices); platform_device_register(&at91sam9261_twi_device); diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 84b38105231..6a01d0360df 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -188,11 +188,12 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_ID("hclk", &macb_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), @@ -210,6 +211,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk), + CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 9b6ca734f1a..8dde220b42b 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -218,9 +218,9 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {} * MMC / SD * -------------------------------------------------------------------- */ -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc0_data, mmc1_data; +static struct mci_platform_data mmc0_data, mmc1_data; static struct resource mmc0_resources[] = { [0] = { @@ -236,7 +236,7 @@ static struct resource mmc0_resources[] = { }; static struct platform_device at91sam9263_mmc0_device = { - .name = "at91_mci", + .name = "atmel_mci", .id = 0, .dev = { .dma_mask = &mmc_dmamask, @@ -261,7 +261,7 @@ static struct resource mmc1_resources[] = { }; static struct platform_device at91sam9263_mmc1_device = { - .name = "at91_mci", + .name = "atmel_mci", .id = 1, .dev = { .dma_mask = &mmc_dmamask, @@ -272,85 +272,110 @@ static struct platform_device at91sam9263_mmc1_device = { .num_resources = ARRAY_SIZE(mmc1_resources), }; -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) { + unsigned int i; + unsigned int slot_count = 0; + if (!data) return; - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { - if (mmc_id == 0) { /* MCI0 */ - /* CLK */ - at91_set_A_periph(AT91_PIN_PA12, 0); + if (!data->slot[i].bus_width) + continue; - if (data->slot_b) { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA16, 1); + /* input/irq */ + if (gpio_is_valid(data->slot[i].detect_pin)) { + at91_set_gpio_input(data->slot[i].detect_pin, + 1); + at91_set_deglitch(data->slot[i].detect_pin, + 1); + } + if (gpio_is_valid(data->slot[i].wp_pin)) + at91_set_gpio_input(data->slot[i].wp_pin, 1); + + if (mmc_id == 0) { /* MCI0 */ + switch (i) { + case 0: /* slot A */ + /* CMD */ + at91_set_A_periph(AT91_PIN_PA1, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA0, 1); + if (data->slot[i].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA3, 1); + at91_set_A_periph(AT91_PIN_PA4, 1); + at91_set_A_periph(AT91_PIN_PA5, 1); + } + slot_count++; + break; + case 1: /* slot B */ + /* CMD */ + at91_set_A_periph(AT91_PIN_PA16, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA17, 1); + if (data->slot[i].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA18, 1); + at91_set_A_periph(AT91_PIN_PA19, 1); + at91_set_A_periph(AT91_PIN_PA20, 1); + } + slot_count++; + break; + default: + printk(KERN_ERR + "AT91: SD/MMC slot %d not available\n", i); + break; + } + if (slot_count) { + /* CLK */ + at91_set_A_periph(AT91_PIN_PA12, 0); - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA17, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA18, 1); - at91_set_A_periph(AT91_PIN_PA19, 1); - at91_set_A_periph(AT91_PIN_PA20, 1); + mmc0_data = *data; + platform_device_register(&at91sam9263_mmc0_device); } - } else { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA0, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA3, 1); - at91_set_A_periph(AT91_PIN_PA4, 1); - at91_set_A_periph(AT91_PIN_PA5, 1); + } else if (mmc_id == 1) { /* MCI1 */ + switch (i) { + case 0: /* slot A */ + /* CMD */ + at91_set_A_periph(AT91_PIN_PA7, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA8, 1); + if (data->slot[i].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA9, 1); + at91_set_A_periph(AT91_PIN_PA10, 1); + at91_set_A_periph(AT91_PIN_PA11, 1); + } + slot_count++; + break; + case 1: /* slot B */ + /* CMD */ + at91_set_A_periph(AT91_PIN_PA21, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA22, 1); + if (data->slot[i].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA23, 1); + at91_set_A_periph(AT91_PIN_PA24, 1); + at91_set_A_periph(AT91_PIN_PA25, 1); + } + slot_count++; + break; + default: + printk(KERN_ERR + "AT91: SD/MMC slot %d not available\n", i); + break; } - } + if (slot_count) { + /* CLK */ + at91_set_A_periph(AT91_PIN_PA6, 0); - mmc0_data = *data; - platform_device_register(&at91sam9263_mmc0_device); - } else { /* MCI1 */ - /* CLK */ - at91_set_A_periph(AT91_PIN_PA6, 0); - - if (data->slot_b) { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA21, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA22, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA23, 1); - at91_set_A_periph(AT91_PIN_PA24, 1); - at91_set_A_periph(AT91_PIN_PA25, 1); - } - } else { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA7, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA8, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA9, 1); - at91_set_A_periph(AT91_PIN_PA10, 1); - at91_set_A_periph(AT91_PIN_PA11, 1); + mmc1_data = *data; + platform_device_register(&at91sam9263_mmc1_device); } } - - mmc1_data = *data; - platform_device_register(&at91sam9263_mmc1_device); } } #else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} #endif /* -------------------------------------------------------------------- @@ -574,7 +599,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9263_twi_device = { - .name = "at91_i2c", + .name = "i2c-at91sam9260", .id = -1, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index ef6cedd52e3..84af1b506d9 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -237,6 +237,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.1", &twi1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk), @@ -254,6 +256,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk), CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk), + CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 1b47319ca00..b1596072dcc 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -31,7 +31,7 @@ #include <mach/at91sam9g45_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> -#include <mach/at_hdmac.h> +#include <linux/platform_data/dma-atmel.h> #include <mach/atmel-mci.h> #include <media/atmel-isi.h> @@ -653,7 +653,7 @@ static struct resource twi0_resources[] = { }; static struct platform_device at91sam9g45_twi0_device = { - .name = "at91_i2c", + .name = "i2c-at91sam9g10", .id = 0, .resource = twi0_resources, .num_resources = ARRAY_SIZE(twi0_resources), @@ -673,7 +673,7 @@ static struct resource twi1_resources[] = { }; static struct platform_device at91sam9g45_twi1_device = { - .name = "at91_i2c", + .name = "i2c-at91sam9g10", .id = 1, .resource = twi1_resources, .num_resources = ARRAY_SIZE(twi1_resources), @@ -686,18 +686,12 @@ void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, in /* pins used for TWI interface */ if (i2c_id == 0) { at91_set_A_periph(AT91_PIN_PA20, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PA20, 1); - at91_set_A_periph(AT91_PIN_PA21, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PA21, 1); platform_device_register(&at91sam9g45_twi0_device); } else { at91_set_A_periph(AT91_PIN_PB10, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PB10, 1); - at91_set_A_periph(AT91_PIN_PB11, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PB11, 1); platform_device_register(&at91sam9g45_twi1_device); } diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 08494664ab7..732d3d3f4ec 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -169,6 +169,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk), + CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), CLKDEV_CON_ID("pioA", &pioAB_clk), CLKDEV_CON_ID("pioB", &pioAB_clk), CLKDEV_CON_ID("pioC", &pioCD_clk), diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 72ce50a50de..72e90841222 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -186,6 +186,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.1", &twi1_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index b3d365dadef..d6ca0543ce8 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -22,7 +22,7 @@ #include <mach/at91sam9rl_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> -#include <mach/at_hdmac.h> +#include <linux/platform_data/dma-atmel.h> #include "generic.h" @@ -161,9 +161,9 @@ void __init at91_add_device_usba(struct usba_platform_data *data) {} * MMC / SD * -------------------------------------------------------------------- */ -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc_data; +static struct mci_platform_data mmc_data; static struct resource mmc_resources[] = { [0] = { @@ -179,7 +179,7 @@ static struct resource mmc_resources[] = { }; static struct platform_device at91sam9rl_mmc_device = { - .name = "at91_mci", + .name = "atmel_mci", .id = -1, .dev = { .dma_mask = &mmc_dmamask, @@ -190,40 +190,40 @@ static struct platform_device at91sam9rl_mmc_device = { .num_resources = ARRAY_SIZE(mmc_resources), }; -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) { if (!data) return; - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); - - /* CLK */ - at91_set_A_periph(AT91_PIN_PA2, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA0, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA3, 1); - at91_set_A_periph(AT91_PIN_PA4, 1); - at91_set_A_periph(AT91_PIN_PA5, 1); + if (data->slot[0].bus_width) { + /* input/irq */ + if (gpio_is_valid(data->slot[0].detect_pin)) { + at91_set_gpio_input(data->slot[0].detect_pin, 1); + at91_set_deglitch(data->slot[0].detect_pin, 1); + } + if (gpio_is_valid(data->slot[0].wp_pin)) + at91_set_gpio_input(data->slot[0].wp_pin, 1); + + /* CLK */ + at91_set_A_periph(AT91_PIN_PA2, 0); + + /* CMD */ + at91_set_A_periph(AT91_PIN_PA1, 1); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA0, 1); + if (data->slot[0].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA3, 1); + at91_set_A_periph(AT91_PIN_PA4, 1); + at91_set_A_periph(AT91_PIN_PA5, 1); + } + + mmc_data = *data; + platform_device_register(&at91sam9rl_mmc_device); } - - mmc_data = *data; - platform_device_register(&at91sam9rl_mmc_device); } #else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} #endif @@ -346,7 +346,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9rl_twi_device = { - .name = "at91_i2c", + .name = "i2c-at91sam9g20", .id = -1, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 477cf9d0667..e5035380dcb 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -231,6 +231,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk), + CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), + CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk), CLKDEV_CON_ID("pioA", &pioAB_clk), CLKDEV_CON_ID("pioB", &pioAB_clk), CLKDEV_CON_ID("pioC", &pioCD_clk), diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index 46090e642d8..6bd7300a2bc 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -47,7 +47,7 @@ static void at91x40_idle(void) * Disable the processor clock. The processor will be automatically * re-enabled by an interrupt or by a reset. */ - __raw_writel(AT91_PS_CR_CPU, AT91_PS_CR); + __raw_writel(AT91_PS_CR_CPU, AT91_IO_P2V(AT91_PS_CR)); cpu_do_idle(); } diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index 6ca680a1d5d..ee06d7bcdf7 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -29,10 +29,10 @@ #include <mach/at91_tc.h> #define at91_tc_read(field) \ - __raw_readl(AT91_TC + field) + __raw_readl(AT91_IO_P2V(AT91_TC) + field) #define at91_tc_write(field, value) \ - __raw_writel(value, AT91_TC + field); + __raw_writel(value, AT91_IO_P2V(AT91_TC) + field); /* * 3 counter/timer units present. diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index de7be193181..93a832f7023 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -133,12 +133,12 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = { /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata afeb9260_mmc_data = { - .det_pin = AT91_PIN_PC9, - .wp_pin = AT91_PIN_PC4, - .slot_b = 1, - .wire4 = 1, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata afeb9260_mci0_data = { + .slot[1] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PC9, + .wp_pin = AT91_PIN_PC4, + }, }; @@ -199,7 +199,7 @@ static void __init afeb9260_board_init(void) at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */ at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */ /* MMC */ - at91_add_device_mmc(0, &afeb9260_mmc_data); + at91_add_device_mci(0, &afeb9260_mci0_data); /* I2C */ at91_add_device_i2c(afeb9260_i2c_devices, ARRAY_SIZE(afeb9260_i2c_devices)); diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index a5b002f32a6..71d8f362a1d 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -71,12 +71,12 @@ static struct at91_udc_data __initdata carmeva_udc_data = { // .vcc_pin = -EINVAL, // }; -static struct at91_mmc_data __initdata carmeva_mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = AT91_PIN_PB10, - .wp_pin = AT91_PIN_PC14, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata carmeva_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PB10, + .wp_pin = AT91_PIN_PC14, + }, }; static struct spi_board_info carmeva_spi_devices[] = { @@ -150,7 +150,7 @@ static void __init carmeva_board_init(void) /* Compact Flash */ // at91_add_device_cf(&carmeva_cf_data); /* MMC */ - at91_add_device_mmc(0, &carmeva_mmc_data); + at91_add_device_mci(0, &carmeva_mci0_data); /* LEDs */ at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds)); } diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index ecbc13b594d..e71c473316e 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -254,8 +254,7 @@ static struct gpio_led cpu9krea_leds[] = { static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = { { - I2C_BOARD_INFO("rtc-ds1307", 0x68), - .type = "ds1339", + I2C_BOARD_INFO("ds1339", 0x68), }, }; @@ -312,12 +311,12 @@ static void __init cpu9krea_add_device_buttons(void) /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata cpu9krea_mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = AT91_PIN_PA29, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata cpu9krea_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PA29, + .wp_pin = -EINVAL, + }, }; static void __init cpu9krea_board_init(void) @@ -359,7 +358,7 @@ static void __init cpu9krea_board_init(void) /* Ethernet */ at91_add_device_eth(&cpu9krea_macb_data); /* MMC */ - at91_add_device_mmc(0, &cpu9krea_mmc_data); + at91_add_device_mci(0, &cpu9krea_mci0_data); /* I2C */ at91_add_device_i2c(cpu9krea_i2c_devices, ARRAY_SIZE(cpu9krea_i2c_devices)); diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 2e6d043c82f..2cbd1a2b6c3 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -78,11 +78,12 @@ static struct at91_udc_data __initdata cpuat91_udc_data = { .pullup_pin = AT91_PIN_PC14, }; -static struct at91_mmc_data __initdata cpuat91_mmc_data = { - .det_pin = AT91_PIN_PC2, - .wire4 = 1, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata cpuat91_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PC2, + .wp_pin = -EINVAL, + }, }; static struct physmap_flash_data cpuat91_flash_data = { @@ -168,7 +169,7 @@ static void __init cpuat91_board_init(void) /* USB Device */ at91_add_device_udc(&cpuat91_udc_data); /* MMC */ - at91_add_device_mmc(0, &cpuat91_mmc_data); + at91_add_device_mci(0, &cpuat91_mci0_data); /* I2C */ at91_add_device_i2c(NULL, 0); /* Platform devices */ diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 462bc319cbc..3e37437a7a6 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -87,12 +87,12 @@ static struct at91_cf_data __initdata csb337_cf_data = { .rst_pin = AT91_PIN_PD2, }; -static struct at91_mmc_data __initdata csb337_mmc_data = { - .det_pin = AT91_PIN_PD5, - .slot_b = 0, - .wire4 = 1, - .wp_pin = AT91_PIN_PD6, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata csb337_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PD5, + .wp_pin = AT91_PIN_PD6, + }, }; static struct spi_board_info csb337_spi_devices[] = { @@ -220,8 +220,6 @@ static struct gpio_led csb_leds[] = { static void __init csb337_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); /* Serial */ /* DBGU on ttyS0 */ at91_register_uart(0, 0, 0); @@ -240,7 +238,7 @@ static void __init csb337_board_init(void) /* SPI */ at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices)); /* MMC */ - at91_add_device_mmc(0, &csb337_mmc_data); + at91_add_device_mci(0, &csb337_mci0_data); /* NOR flash */ platform_device_register(&csb_flash); /* LEDs */ diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index d1e1f3fc0a4..0cfac16ee9d 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -70,12 +70,12 @@ static struct at91_cf_data __initdata eb9200_cf_data = { .rst_pin = AT91_PIN_PC5, }; -static struct at91_mmc_data __initdata eb9200_mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata eb9200_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; static struct i2c_board_info __initdata eb9200_i2c_devices[] = { @@ -113,7 +113,7 @@ static void __init eb9200_board_init(void) at91_add_device_spi(NULL, 0); /* MMC */ /* only supports 1 or 4 bit interface, not wired through to SPI */ - at91_add_device_mmc(0, &eb9200_mmc_data); + at91_add_device_mci(0, &eb9200_mci0_data); } MACHINE_START(ATEB9200, "Embest ATEB9200") diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index 9c24cb25707..3d931ffac4b 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -64,12 +64,12 @@ static struct at91_usbh_data __initdata ecb_at91usbh_data = { .overcurrent_pin= {-EINVAL, -EINVAL}, }; -static struct at91_mmc_data __initdata ecb_at91mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata ecbat91_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; @@ -138,11 +138,20 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = { }, }; +/* + * LEDs + */ +static struct gpio_led ecb_leds[] = { + { /* D1 */ + .name = "led1", + .gpio = AT91_PIN_PC7, + .active_low = 1, + .default_trigger = "heartbeat", + } +}; + static void __init ecb_at91board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -161,10 +170,13 @@ static void __init ecb_at91board_init(void) at91_add_device_i2c(NULL, 0); /* MMC */ - at91_add_device_mmc(0, &ecb_at91mmc_data); + at91_add_device_mci(0, &ecbat91_mci0_data); /* SPI */ at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices)); + + /* LEDs */ + at91_gpio_leds(ecb_leds, ARRAY_SIZE(ecb_leds)); } MACHINE_START(ECBAT91, "emQbit's ECB_AT91") diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 82bdfde3405..d93658a2b12 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -56,12 +56,12 @@ static struct at91_udc_data __initdata eco920_udc_data = { .pullup_pin = AT91_PIN_PB13, }; -static struct at91_mmc_data __initdata eco920_mmc_data = { - .slot_b = 0, - .wire4 = 0, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata eco920_mci0_data = { + .slot[0] = { + .bus_width = 1, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; static struct physmap_flash_data eco920_flash_data = { @@ -93,10 +93,26 @@ static struct spi_board_info eco920_spi_devices[] = { }, }; +/* + * LEDs + */ +static struct gpio_led eco920_leds[] = { + { /* D1 */ + .name = "led1", + .gpio = AT91_PIN_PB0, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* D2 */ + .name = "led2", + .gpio = AT91_PIN_PB1, + .active_low = 1, + .default_trigger = "timer", + } +}; + static void __init eco920_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); /* DBGU on ttyS0. (Rx & Tx only */ at91_register_uart(0, 0, 0); at91_add_device_serial(); @@ -104,7 +120,7 @@ static void __init eco920_board_init(void) at91_add_device_usbh(&eco920_usbh_data); at91_add_device_udc(&eco920_udc_data); - at91_add_device_mmc(0, &eco920_mmc_data); + at91_add_device_mci(0, &eco920_mci0_data); platform_device_register(&eco920_flash); at91_ramc_write(0, AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1) @@ -127,6 +143,8 @@ static void __init eco920_board_init(void) ); at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices)); + /* LEDs */ + at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds)); } MACHINE_START(ECO920, "eco920") diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 6cc83a87d77..fa98abacb1b 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -75,12 +75,12 @@ static struct spi_board_info flexibity_spi_devices[] = { }; /* MCI (SD/MMC) */ -static struct at91_mmc_data __initdata flexibity_mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = AT91_PIN_PC9, - .wp_pin = AT91_PIN_PC4, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata flexibity_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PC9, + .wp_pin = AT91_PIN_PC4, + }, }; /* LEDs */ @@ -152,7 +152,7 @@ static void __init flexibity_board_init(void) at91_add_device_spi(flexibity_spi_devices, ARRAY_SIZE(flexibity_spi_devices)); /* MMC */ - at91_add_device_mmc(0, &flexibity_mmc_data); + at91_add_device_mci(0, &flexibity_mci0_data); /* LEDs */ at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds)); } diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index 69ab1247ef8..6e47071d820 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -86,7 +86,7 @@ static struct at91_udc_data __initdata foxg20_udc_data = { * SPI devices. */ static struct spi_board_info foxg20_spi_devices[] = { -#if !defined(CONFIG_MMC_AT91) +#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) { .modalias = "mtd_dataflash", .chip_select = 1, @@ -109,12 +109,12 @@ static struct macb_platform_data __initdata foxg20_macb_data = { * MCI (SD/MMC) * det_pin, wp_pin and vcc_pin are not connected */ -static struct at91_mmc_data __initdata foxg20_mmc_data = { - .slot_b = 1, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata foxg20_mci0_data = { + .slot[1] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; @@ -247,7 +247,7 @@ static void __init foxg20_board_init(void) /* Ethernet */ at91_add_device_eth(&foxg20_macb_data); /* MMC */ - at91_add_device_mmc(0, &foxg20_mmc_data); + at91_add_device_mci(0, &foxg20_mci0_data); /* I2C */ at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices)); /* LEDs */ diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 64c1dbf88a0..86050da3ba5 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -66,11 +66,20 @@ static struct at91_udc_data __initdata kafa_udc_data = { .pullup_pin = AT91_PIN_PB7, }; +/* + * LEDs + */ +static struct gpio_led kafa_leds[] = { + { /* D1 */ + .name = "led1", + .gpio = AT91_PIN_PB4, + .active_low = 1, + .default_trigger = "heartbeat", + }, +}; + static void __init kafa_board_init(void) { - /* Set up the LEDs */ - at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -88,6 +97,8 @@ static void __init kafa_board_init(void) at91_add_device_i2c(NULL, 0); /* SPI */ at91_add_device_spi(NULL, 0); + /* LEDs */ + at91_gpio_leds(kafa_leds, ARRAY_SIZE(kafa_leds)); } MACHINE_START(KAFA, "Sperry-Sun KAFA") diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index 5d96cb85175..abe9fed7a3e 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -69,12 +69,12 @@ static struct at91_udc_data __initdata kb9202_udc_data = { .pullup_pin = AT91_PIN_PB22, }; -static struct at91_mmc_data __initdata kb9202_mmc_data = { - .det_pin = AT91_PIN_PB2, - .slot_b = 0, - .wire4 = 1, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata kb9202_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PB2, + .wp_pin = -EINVAL, + }, }; static struct mtd_partition __initdata kb9202_nand_partition[] = { @@ -96,11 +96,26 @@ static struct atmel_nand_data __initdata kb9202_nand_data = { .num_parts = ARRAY_SIZE(kb9202_nand_partition), }; +/* + * LEDs + */ +static struct gpio_led kb9202_leds[] = { + { /* D1 */ + .name = "led1", + .gpio = AT91_PIN_PC19, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* D2 */ + .name = "led2", + .gpio = AT91_PIN_PC18, + .active_low = 1, + .default_trigger = "timer", + } +}; + static void __init kb9202_board_init(void) { - /* Set up the LEDs */ - at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -121,13 +136,15 @@ static void __init kb9202_board_init(void) /* USB Device */ at91_add_device_udc(&kb9202_udc_data); /* MMC */ - at91_add_device_mmc(0, &kb9202_mmc_data); + at91_add_device_mci(0, &kb9202_mci0_data); /* I2C */ at91_add_device_i2c(NULL, 0); /* SPI */ at91_add_device_spi(NULL, 0); /* NAND */ at91_add_device_nand(&kb9202_nand_data); + /* LEDs */ + at91_gpio_leds(kb9202_leds, ARRAY_SIZE(kb9202_leds)); } MACHINE_START(KB9200, "KB920x") diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 18103c5d993..9cda3fd346a 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -138,11 +138,12 @@ static struct spi_board_info neocore926_spi_devices[] = { /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata neocore926_mmc_data = { - .wire4 = 1, - .det_pin = AT91_PIN_PE18, - .wp_pin = AT91_PIN_PE19, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata neocore926_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PE18, + .wp_pin = AT91_PIN_PE19, + }, }; @@ -354,7 +355,7 @@ static void __init neocore926_board_init(void) neocore926_add_device_ts(); /* MMC */ - at91_add_device_mmc(1, &neocore926_mmc_data); + at91_add_device_mci(0, &neocore926_mci0_data); /* Ethernet */ at91_add_device_eth(&neocore926_macb_data); diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 12706550450..f83e1de699e 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -62,12 +62,12 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = { .overcurrent_pin= {-EINVAL, -EINVAL}, }; -static struct at91_mmc_data __initdata picotux200_mmc_data = { - .det_pin = AT91_PIN_PB27, - .slot_b = 0, - .wire4 = 1, - .wp_pin = AT91_PIN_PA17, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata picotux200_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PB27, + .wp_pin = AT91_PIN_PA17, + }, }; #define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0 @@ -112,7 +112,7 @@ static void __init picotux200_board_init(void) at91_add_device_i2c(NULL, 0); /* MMC */ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ - at91_add_device_mmc(0, &picotux200_mmc_data); + at91_add_device_mci(0, &picotux200_mci0_data); /* NOR Flash */ platform_device_register(&picotux200_flash); } diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index bf351e28542..799f214edeb 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -156,12 +156,12 @@ static void __init ek_add_device_nand(void) /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata ek_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; /* @@ -245,7 +245,7 @@ static void __init ek_board_init(void) /* Ethernet */ at91_add_device_eth(&ek_macb_data); /* MMC */ - at91_add_device_mmc(0, &ek_mmc_data); + at91_add_device_mci(0, &ek_mci0_data); /* Push Buttons */ ek_add_device_buttons(); /* LEDs */ diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index cc2bf979607..66338e7ebfb 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -77,12 +77,12 @@ static struct at91_cf_data __initdata dk_cf_data = { }; #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD -static struct at91_mmc_data __initdata dk_mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata dk_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; #endif @@ -177,9 +177,6 @@ static struct gpio_led dk_leds[] = { static void __init dk_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -208,7 +205,7 @@ static void __init dk_board_init(void) #else /* MMC */ at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ - at91_add_device_mmc(0, &dk_mmc_data); + at91_add_device_mci(0, &dk_mci0_data); #endif /* NAND */ at91_add_device_nand(&dk_nand_data); diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 62e19e64c9d..5d1b5729dc6 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -70,12 +70,12 @@ static struct at91_udc_data __initdata ek_udc_data = { }; #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD -static struct at91_mmc_data __initdata ek_mmc_data = { - .det_pin = AT91_PIN_PB27, - .slot_b = 0, - .wire4 = 1, - .wp_pin = AT91_PIN_PA17, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata ek_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PB27, + .wp_pin = AT91_PIN_PA17, + } }; #endif @@ -148,9 +148,6 @@ static struct gpio_led ek_leds[] = { static void __init ek_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -177,7 +174,7 @@ static void __init ek_board_init(void) #else /* MMC */ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ - at91_add_device_mmc(0, &ek_mmc_data); + at91_add_device_mci(0, &ek_mci0_data); #endif /* NOR Flash */ platform_device_register(&ek_flash); diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c index c3b43aefdb7..a0ecf04e9ae 100644 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -58,11 +58,12 @@ static struct at91_usbh_data rsi_ews_usbh_data __initdata = { /* * SD/MC */ -static struct at91_mmc_data rsi_ews_mmc_data __initdata = { - .slot_b = 0, - .wire4 = 1, - .det_pin = AT91_PIN_PB27, - .wp_pin = AT91_PIN_PB29, +static struct mci_platform_data __initdata rsi_ews_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PB27, + .wp_pin = AT91_PIN_PB29, + }, }; /* @@ -185,9 +186,6 @@ static struct platform_device rsiews_nor_flash = { */ static void __init rsi_ews_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ /* This one is for debugging */ @@ -215,7 +213,7 @@ static void __init rsi_ews_board_init(void) at91_add_device_spi(rsi_ews_spi_devices, ARRAY_SIZE(rsi_ews_spi_devices)); /* MMC */ - at91_add_device_mmc(0, &rsi_ews_mmc_data); + at91_add_device_mci(0, &rsi_ews_mci0_data); /* NOR Flash */ platform_device_register(&rsiews_nor_flash); /* LEDs */ diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 7bf6da70d7d..c5f01acce3c 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -73,7 +73,7 @@ static struct at91_udc_data __initdata ek_udc_data = { * SPI devices. */ static struct spi_board_info ek_spi_devices[] = { -#if !defined(CONFIG_MMC_AT91) +#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) { /* DataFlash chip */ .modalias = "mtd_dataflash", .chip_select = 1, @@ -158,19 +158,34 @@ static void __init ek_add_device_nand(void) /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .slot_b = 1, - .wire4 = 1, - .det_pin = AT91_PIN_PC8, - .wp_pin = AT91_PIN_PC4, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata ek_mci0_data = { + .slot[1] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PC8, + .wp_pin = AT91_PIN_PC4, + }, +}; + +/* + * LEDs + */ +static struct gpio_led ek_leds[] = { + { /* D1 */ + .name = "led1", + .gpio = AT91_PIN_PA9, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* D2 */ + .name = "led2", + .gpio = AT91_PIN_PA6, + .active_low = 1, + .default_trigger = "timer", + } }; static void __init ek_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -194,9 +209,11 @@ static void __init ek_board_init(void) /* Ethernet */ at91_add_device_eth(&ek_macb_data); /* MMC */ - at91_add_device_mmc(0, &ek_mmc_data); + at91_add_device_mci(0, &ek_mci0_data); /* I2C */ at91_add_device_i2c(NULL, 0); + /* LEDs */ + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); } MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 889c1bf71eb..8cd6e679fbe 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -108,7 +108,7 @@ static void __init at73c213_set_clk(struct at73c213_board_info *info) {} * SPI devices. */ static struct spi_board_info ek_spi_devices[] = { -#if !defined(CONFIG_MMC_AT91) +#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) { /* DataFlash chip */ .modalias = "mtd_dataflash", .chip_select = 1, @@ -211,12 +211,12 @@ static void __init ek_add_device_nand(void) /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .slot_b = 1, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata ek_mci0_data = { + .slot[1] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; @@ -329,7 +329,7 @@ static void __init ek_board_init(void) /* Ethernet */ at91_add_device_eth(&ek_macb_data); /* MMC */ - at91_add_device_mmc(0, &ek_mmc_data); + at91_add_device_mci(0, &ek_mci0_data); /* I2C */ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); /* SSC (to AT73C213) */ diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 2269be5fa38..27b3af1a304 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -340,11 +340,12 @@ static struct spi_board_info ek_spi_devices[] = { * MCI (SD/MMC) * det_pin, wp_pin and vcc_pin are not connected */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; #endif /* CONFIG_SPI_ATMEL_* */ @@ -569,9 +570,6 @@ static struct gpio_led ek_leds[] = { static void __init ek_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -598,7 +596,7 @@ static void __init ek_board_init(void) at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX); #else /* MMC */ - at91_add_device_mmc(0, &ek_mmc_data); + at91_add_device_mci(0, &mci0_data); #endif /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 82adf581afc..073e17403d9 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -141,11 +141,12 @@ static struct spi_board_info ek_spi_devices[] = { /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .wire4 = 1, - .det_pin = AT91_PIN_PE18, - .wp_pin = AT91_PIN_PE19, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata mci1_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PE18, + .wp_pin = AT91_PIN_PE19, + }, }; @@ -420,7 +421,7 @@ static void __init ek_board_init(void) /* Touchscreen */ ek_add_device_ts(); /* MMC */ - at91_add_device_mmc(1, &ek_mmc_data); + at91_add_device_mci(1, &mci1_data); /* Ethernet */ at91_add_device_eth(&ek_macb_data); /* NAND */ diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 4ea4ee00364..3ab2b86a376 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -92,7 +92,7 @@ static struct at91_udc_data __initdata ek_udc_data = { * SPI devices. */ static struct spi_board_info ek_spi_devices[] = { -#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91)) +#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) { /* DataFlash chip */ .modalias = "mtd_dataflash", .chip_select = 1, @@ -199,7 +199,6 @@ static void __init ek_add_device_nand(void) * MCI (SD/MMC) * wp_pin and vcc_pin are not connected */ -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) static struct mci_platform_data __initdata ek_mmc_data = { .slot[1] = { .bus_width = 4, @@ -208,28 +207,15 @@ static struct mci_platform_data __initdata ek_mmc_data = { }, }; -#else -static struct at91_mmc_data __initdata ek_mmc_data = { - .slot_b = 1, /* Only one slot so use slot B */ - .wire4 = 1, - .det_pin = AT91_PIN_PC9, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, -}; -#endif static void __init ek_add_device_mmc(void) { -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) if (ek_have_2mmc()) { ek_mmc_data.slot[0].bus_width = 4; ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2; ek_mmc_data.slot[0].wp_pin = -1; } at91_add_device_mci(0, &ek_mmc_data); -#else - at91_add_device_mmc(0, &ek_mmc_data); -#endif } /* diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index e7dc3ead704..fb89ea92e3f 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -56,11 +56,12 @@ static struct usba_platform_data __initdata ek_usba_udc_data = { /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .wire4 = 1, - .det_pin = AT91_PIN_PA15, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PA15, + .wp_pin = -EINVAL, + }, }; @@ -303,7 +304,7 @@ static void __init ek_board_init(void) /* SPI */ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); /* MMC */ - at91_add_device_mmc(0, &ek_mmc_data); + at91_add_device_mci(0, &mci0_data); /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); /* AC97 */ diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 29eae1626bf..c3fb31d5116 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -83,7 +83,6 @@ static void __init add_device_nand(void) * MCI (SD/MMC) * det_pin, wp_pin and vcc_pin are not connected */ -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) static struct mci_platform_data __initdata mmc_data = { .slot[0] = { .bus_width = 4, @@ -91,15 +90,6 @@ static struct mci_platform_data __initdata mmc_data = { .wp_pin = -1, }, }; -#else -static struct at91_mmc_data __initdata mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, -}; -#endif /* @@ -223,11 +213,7 @@ void __init stamp9g20_board_init(void) /* NAND */ add_device_nand(); /* MMC */ -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) at91_add_device_mci(0, &mmc_data); -#else - at91_add_device_mmc(0, &mmc_data); -#endif /* W1 */ add_w1(); } diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c index c1476b9fe7b..6ea069b5733 100644 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ b/arch/arm/mach-at91/board-usb-a926x.c @@ -109,14 +109,12 @@ static struct mmc_spi_platform_data at91_mmc_spi_pdata = { * SPI devices. */ static struct spi_board_info usb_a9263_spi_devices[] = { -#if !defined(CONFIG_MMC_AT91) { /* DataFlash chip */ .modalias = "mtd_dataflash", .chip_select = 0, .max_speed_hz = 15 * 1000 * 1000, .bus_num = 0, } -#endif }; static struct spi_board_info usb_a9g20_spi_devices[] = { diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 516d340549d..f162fdfd66e 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -119,11 +119,12 @@ static struct at91_udc_data __initdata yl9200_udc_data = { /* * MMC */ -static struct at91_mmc_data __initdata yl9200_mmc_data = { - .det_pin = AT91_PIN_PB9, - .wire4 = 1, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata yl9200_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PB9, + .wp_pin = -EINVAL, + }, }; /* @@ -541,9 +542,6 @@ void __init yl9200_add_device_video(void) {} static void __init yl9200_board_init(void) { - /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */ - at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -568,7 +566,7 @@ static void __init yl9200_board_init(void) /* I2C */ at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices)); /* MMC */ - at91_add_device_mmc(0, &yl9200_mmc_data); + at91_add_device_mci(0, &yl9200_mci0_data); /* NAND */ at91_add_device_nand(&yl9200_nand_data); /* NOR Flash */ diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 188c82971eb..33361505c0c 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -625,7 +625,7 @@ fail: return 0; } -static struct clk *const standard_pmc_clocks[] __initdata = { +static struct clk *const standard_pmc_clocks[] __initconst = { /* four primary clocks */ &clk32k, &main_clk, diff --git a/arch/arm/mach-at91/include/mach/at91_twi.h b/arch/arm/mach-at91/include/mach/at91_twi.h deleted file mode 100644 index bb2880f6ba3..00000000000 --- a/arch/arm/mach-at91/include/mach/at91_twi.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_twi.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Two-wire Interface (TWI) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_TWI_H -#define AT91_TWI_H - -#define AT91_TWI_CR 0x00 /* Control Register */ -#define AT91_TWI_START (1 << 0) /* Send a Start Condition */ -#define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */ -#define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */ -#define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */ -#define AT91_TWI_SVEN (1 << 4) /* Slave Transfer Enable [SAM9260 only] */ -#define AT91_TWI_SVDIS (1 << 5) /* Slave Transfer Disable [SAM9260 only] */ -#define AT91_TWI_SWRST (1 << 7) /* Software Reset */ - -#define AT91_TWI_MMR 0x04 /* Master Mode Register */ -#define AT91_TWI_IADRSZ (3 << 8) /* Internal Device Address Size */ -#define AT91_TWI_IADRSZ_NO (0 << 8) -#define AT91_TWI_IADRSZ_1 (1 << 8) -#define AT91_TWI_IADRSZ_2 (2 << 8) -#define AT91_TWI_IADRSZ_3 (3 << 8) -#define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */ -#define AT91_TWI_DADR (0x7f << 16) /* Device Address */ - -#define AT91_TWI_SMR 0x08 /* Slave Mode Register [SAM9260 only] */ -#define AT91_TWI_SADR (0x7f << 16) /* Slave Address */ - -#define AT91_TWI_IADR 0x0c /* Internal Address Register */ - -#define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */ -#define AT91_TWI_CLDIV (0xff << 0) /* Clock Low Divisor */ -#define AT91_TWI_CHDIV (0xff << 8) /* Clock High Divisor */ -#define AT91_TWI_CKDIV (7 << 16) /* Clock Divider */ - -#define AT91_TWI_SR 0x20 /* Status Register */ -#define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */ -#define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */ -#define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */ -#define AT91_TWI_SVREAD (1 << 3) /* Slave Read [SAM9260 only] */ -#define AT91_TWI_SVACC (1 << 4) /* Slave Access [SAM9260 only] */ -#define AT91_TWI_GACC (1 << 5) /* General Call Access [SAM9260 only] */ -#define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */ -#define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */ -#define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */ -#define AT91_TWI_ARBLST (1 << 9) /* Arbitration Lost [SAM9260 only] */ -#define AT91_TWI_SCLWS (1 << 10) /* Clock Wait State [SAM9260 only] */ -#define AT91_TWI_EOSACC (1 << 11) /* End of Slave Address [SAM9260 only] */ - -#define AT91_TWI_IER 0x24 /* Interrupt Enable Register */ -#define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */ -#define AT91_TWI_IMR 0x2c /* Interrupt Mask Register */ -#define AT91_TWI_RHR 0x30 /* Receive Holding Register */ -#define AT91_TWI_THR 0x34 /* Transmit Holding Register */ - -#endif - diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h deleted file mode 100644 index cab0997be3d..00000000000 --- a/arch/arm/mach-at91/include/mach/at_hdmac.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Header file for the Atmel AHB DMA Controller driver - * - * Copyright (C) 2008 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef AT_HDMAC_H -#define AT_HDMAC_H - -#include <linux/dmaengine.h> - -/** - * struct at_dma_platform_data - Controller configuration parameters - * @nr_channels: Number of channels supported by hardware (max 8) - * @cap_mask: dma_capability flags supported by the platform - */ -struct at_dma_platform_data { - unsigned int nr_channels; - dma_cap_mask_t cap_mask; -}; - -/** - * struct at_dma_slave - Controller-specific information about a slave - * @dma_dev: required DMA master device - * @cfg: Platform-specific initializer for the CFG register - */ -struct at_dma_slave { - struct device *dma_dev; - u32 cfg; -}; - - -/* Platform-configurable bits in CFG */ -#define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */ -#define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */ -#define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */ -#define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */ -#define ATC_SRC_H2SEL_SW (0x0 << 9) -#define ATC_SRC_H2SEL_HW (0x1 << 9) -#define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */ -#define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */ -#define ATC_DST_H2SEL_SW (0x0 << 13) -#define ATC_DST_H2SEL_HW (0x1 << 13) -#define ATC_SOD (0x1 << 16) /* Stop On Done */ -#define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */ -#define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */ -#define ATC_LOCK_IF_L (0x1 << 22) /* Master Interface Arbiter Lock */ -#define ATC_LOCK_IF_L_CHUNK (0x0 << 22) -#define ATC_LOCK_IF_L_BUFFER (0x1 << 22) -#define ATC_AHB_PROT_MASK (0x7 << 24) /* AHB Protection */ -#define ATC_FIFOCFG_MASK (0x3 << 28) /* FIFO Request Configuration */ -#define ATC_FIFOCFG_LARGESTBURST (0x0 << 28) -#define ATC_FIFOCFG_HALFFIFO (0x1 << 28) -#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28) - - -#endif /* AT_HDMAC_H */ diff --git a/arch/arm/mach-at91/include/mach/atmel-mci.h b/arch/arm/mach-at91/include/mach/atmel-mci.h index 998cb0c0713..cd580a12e90 100644 --- a/arch/arm/mach-at91/include/mach/atmel-mci.h +++ b/arch/arm/mach-at91/include/mach/atmel-mci.h @@ -1,7 +1,7 @@ #ifndef __MACH_ATMEL_MCI_H #define __MACH_ATMEL_MCI_H -#include <mach/at_hdmac.h> +#include <linux/platform_data/dma-atmel.h> /** * struct mci_dma_data - DMA data for MCI interface diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 369afc2ffc5..c55a4364ffb 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -187,7 +187,6 @@ struct at91_can_data { extern void __init at91_add_device_can(struct at91_can_data *data); /* LEDs */ -extern void __init at91_init_leds(u8 cpu_led, u8 timer_led); extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); extern void __init at91_pwm_leds(struct gpio_led *leds, int nr); diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 09242b67d27..711a7892d33 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -67,13 +67,13 @@ * to 0xFEF78000 .. 0xFF000000. (544Kb) */ #define AT91_IO_PHYS_BASE 0xFFF78000 -#define AT91_IO_VIRT_BASE (0xFF000000 - AT91_IO_SIZE) +#define AT91_IO_VIRT_BASE IOMEM(0xFF000000 - AT91_IO_SIZE) #else /* * Identity mapping for the non MMU case. */ #define AT91_IO_PHYS_BASE AT91_BASE_SYS -#define AT91_IO_VIRT_BASE AT91_IO_PHYS_BASE +#define AT91_IO_VIRT_BASE IOMEM(AT91_IO_PHYS_BASE) #endif #define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1) diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h index 6f6118d1576..97ad68a826f 100644 --- a/arch/arm/mach-at91/include/mach/uncompress.h +++ b/arch/arm/mach-at91/include/mach/uncompress.h @@ -94,7 +94,7 @@ static const u32 uarts_sam9x5[] = { 0, }; -static inline const u32* decomp_soc_detect(u32 dbgu_base) +static inline const u32* decomp_soc_detect(void __iomem *dbgu_base) { u32 cidr, socid; @@ -142,10 +142,10 @@ static inline void arch_decomp_setup(void) int i = 0; const u32* usarts; - usarts = decomp_soc_detect(AT91_BASE_DBGU0); + usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU0); if (!usarts) - usarts = decomp_soc_detect(AT91_BASE_DBGU1); + usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU1); if (!usarts) { at91_uart = NULL; return; diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index 8dfafe76ffe..1b1e62b5f41 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -90,108 +90,3 @@ void __init at91_pwm_leds(struct gpio_led *leds, int nr) #else void __init at91_pwm_leds(struct gpio_led *leds, int nr){} #endif - - -/* ------------------------------------------------------------------------- */ - -#if defined(CONFIG_LEDS) - -#include <asm/leds.h> - -/* - * Old ARM-specific LED framework; not fully functional when generic time is - * in use. - */ - -static u8 at91_leds_cpu; -static u8 at91_leds_timer; - -static inline void at91_led_on(unsigned int led) -{ - at91_set_gpio_value(led, 0); -} - -static inline void at91_led_off(unsigned int led) -{ - at91_set_gpio_value(led, 1); -} - -static inline void at91_led_toggle(unsigned int led) -{ - unsigned long is_off = at91_get_gpio_value(led); - if (is_off) - at91_led_on(led); - else - at91_led_off(led); -} - - -/* - * Handle LED events. - */ -static void at91_leds_event(led_event_t evt) -{ - unsigned long flags; - - local_irq_save(flags); - - switch(evt) { - case led_start: /* System startup */ - at91_led_on(at91_leds_cpu); - break; - - case led_stop: /* System stop / suspend */ - at91_led_off(at91_leds_cpu); - break; - -#ifdef CONFIG_LEDS_TIMER - case led_timer: /* Every 50 timer ticks */ - at91_led_toggle(at91_leds_timer); - break; -#endif - -#ifdef CONFIG_LEDS_CPU - case led_idle_start: /* Entering idle state */ - at91_led_off(at91_leds_cpu); - break; - - case led_idle_end: /* Exit idle state */ - at91_led_on(at91_leds_cpu); - break; -#endif - - default: - break; - } - - local_irq_restore(flags); -} - - -static int __init leds_init(void) -{ - if (!at91_leds_timer || !at91_leds_cpu) - return -ENODEV; - - leds_event = at91_leds_event; - - leds_event(led_start); - return 0; -} - -__initcall(leds_init); - - -void __init at91_init_leds(u8 cpu_led, u8 timer_led) -{ - /* Enable GPIO to access the LEDs */ - at91_set_gpio_output(cpu_led, 1); - at91_set_gpio_output(timer_led, 1); - - at91_leds_cpu = cpu_led; - at91_leds_timer = timer_led; -} - -#else -void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} -#endif diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 2c2d86505a5..5315f05896e 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -153,7 +153,9 @@ static int at91_pm_verify_clocks(void) } } -#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS + if (!IS_ENABLED(CONFIG_AT91_PROGRAMMABLE_CLOCKS)) + return 1; + /* PCK0..PCK3 must be disabled, or configured to use clk32k */ for (i = 0; i < 4; i++) { u32 css; @@ -167,7 +169,6 @@ static int at91_pm_verify_clocks(void) return 0; } } -#endif return 1; } diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 944bffb0899..da9881b161e 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -73,7 +73,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length) { struct map_desc *desc = &sram_desc[bank]; - desc->virtual = AT91_IO_VIRT_BASE - length; + desc->virtual = (unsigned long)AT91_IO_VIRT_BASE - length; if (bank > 0) desc->virtual -= sram_desc[bank - 1].length; @@ -87,8 +87,8 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length) iotable_init(desc, 1); } -static struct map_desc at91_io_desc __initdata = { - .virtual = AT91_VA_BASE_SYS, +static struct map_desc at91_io_desc __initdata __maybe_unused = { + .virtual = (unsigned long)AT91_VA_BASE_SYS, .pfn = __phys_to_pfn(AT91_BASE_SYS), .length = SZ_16K, .type = MT_DEVICE, |